Car-and-Safety.com
Ford F250 1988 Safety Reports and Reviews
Ford F250 1988 Reviews
Ford F250 1988 Power Train Automatic TransmissionFord F250 1988 Power Train Automatic Transmission Review #959584 FORD F250 1988 car safety problem was reported on .FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . transmission; purchase truck used having problem with the transmission consumer think truck been in an accident it been work on about three times making noise..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FTFF25N0JP. Ford F250 1988 problem was reported in CORONA, CA. Vehicle was not using Cruise Control. Ford F250 1988 Seat Belts Front Buckle AssemblyFord F250 1988 Seat Belts Front Buckle Assembly Review #960355 FORD F250 1988 car safety problem was reported on Jan 10, 1993.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with SEAT BELTS:FRONT:BUCKLE ASSEMBLY . drivers side seat belt buckle will not latch, dealer refuses to fix, not under warranty. tt.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FTEF25Y1JP. Ford F250 1988 problem was reported in VAN NUYS, CA. Vehicle was not using Cruise Control. Ford F250 1988 Service Brakes, Hydraulic AntilockFord F250 1988 Service Brakes, Hydraulic Antilock Review #963748 FORD F250 1988 car safety problem was reported on Dec 01, 1994.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC:ANTILOCK . abs anti-lock driving try to stop the abs anti-lock brake fail. tt.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FTHF26M5JC. Ford F250 1988 problem was reported in EVERETT, WA. Vehicle was not using Cruise Control. Ford F250 1988 Fuel System, Gasoline Storage Tank AssemblyFord F250 1988 Fuel System, Gasoline Storage Tank Assembly Review #965053 FORD F250 1988 car safety problem was reported on May 01, 1995.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY . fuel tank is rusting from inside causing corrosion in the line. tt.0 person(s) were injured. 0 person(s) died.Ford F250 1988 problem was reported in CONWAY, MO. Vehicle was not using Cruise Control. Ford F250 1988 Service Brakes, Hydraulic AntilockFord F250 1988 Service Brakes, Hydraulic Antilock Review #965051 FORD F250 1988 car safety problem was reported on Mar 01, 1993.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC:ANTILOCK . abs, brakes system activates without warning, and when applying brake loss effectivess. tt.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1GNEC16K2RJ. Ford F250 1988 problem was reported in MERRICK, NY. Vehicle was not using Cruise Control. Ford F250 1988 Service Brakes, Hydraulic Foundation Components Master CylinderFord F250 1988 Service Brakes, Hydraulic Foundation Components Master Cylinder Review #482276 FORD F250 1988 car safety problem was reported on Mar 21, 1995.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER . master cylinder relaced due to brake failures. *skd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FTHF26M3JC. Ford F250 1988 problem was reported in GRANBURY, TX. Vehicle was not using Cruise Control. Ford F250 1988 Fuel System, Gasoline Fuel Injection SystemFord F250 1988 Fuel System, Gasoline Fuel Injection System Review #482276 FORD F250 1988 car safety problem was reported on Sept 12, 1988.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM . fuel injector pump failed twice, causing loss of power/fuel leak..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FTHF26M3JC. Ford F250 1988 problem was reported in GRANBURY, TX. Vehicle was not using Cruise Control. Ford F250 1988 Exterior Lighting HeadlightsFord F250 1988 Exterior Lighting Headlights Review #968006 FORD F250 1988 car safety problem was reported on June 28, 1995.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with EXTERIOR LIGHTING:HEADLIGHTS . head lights and tail light keep going out while driving. tt.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FTHX26M3JK. Ford F250 1988 problem was reported in BAYARD, MN. Vehicle was not using Cruise Control. Ford F250 1988 Structure BodyFord F250 1988 Structure Body Review #971737 FORD F250 1988 car safety problem was reported on Sept 07, 1995.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with STRUCTURE:BODY . firewall on vehicle has collapsed. tt.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FTHX25G1JK. Ford F250 1988 problem was reported in KENT, WA. Vehicle was not using Cruise Control. Ford F250 1988 Fuel System, OtherFord F250 1988 Fuel System, Other Review #971894 FORD F250 1988 car safety problem was reported on Dec 01, 1991.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with FUEL SYSTEM, OTHER . has tried to report to ford the problem with the fuel gauge ford offers no assistance. tt.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):JW35G7JCAJ2. Ford F250 1988 problem was reported in OLIMPIA, WA. Vehicle was not using Cruise Control. Ford F250 1988 Engine And Engine Cooling Exhaust System Manifold/header/muffler/tail PipeFORD F250 1988 car safety problem was reported on Aug 12, 1995.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE . exhaust mainfold replaced due to odors emitting inside of vehicle..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FTHF26H7JK. Ford F250 1988 problem was reported in GREENTOWN, PA. Vehicle was not using Cruise Control. Ford F250 1988 Engine And Engine Cooling EngineFord F250 1988 Engine And Engine Cooling Engine Review #484983 FORD F250 1988 car safety problem was reported on Aug 12, 1995.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with ENGINE AND ENGINE COOLING:ENGINE . defective oil dip stick..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FTHF26H7JK. Ford F250 1988 problem was reported in GREENTOWN, PA. Vehicle was not using Cruise Control. Ford F250 1988 Suspension FrontFord F250 1988 Suspension Front Review #484983 FORD F250 1988 car safety problem was reported on Aug 12, 1995.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with SUSPENSION:FRONT . defective front end. *skd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FTHF26H7JK. Ford F250 1988 problem was reported in GREENTOWN, PA. Vehicle was not using Cruise Control. Ford F250 1988 Steering Gear Box (other Than Rack And Pinion)Ford F250 1988 Steering Gear Box (other Than Rack And Pinion) Review #484983 FORD F250 1988 car safety problem was reported on Aug 12, 1995.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with STEERING:GEAR BOX (OTHER THAN RACK AND PINION) . steering gear box replaced..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FTHF26H7JK. Ford F250 1988 problem was reported in GREENTOWN, PA. Vehicle was not using Cruise Control. Ford F250 1988 Engine And Engine Cooling Engine GasolineFord F250 1988 Engine And Engine Cooling Engine Gasoline Review #484983 FORD F250 1988 car safety problem was reported on Aug 12, 1995.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with ENGINE AND ENGINE COOLING:ENGINE:GASOLINE . engine sealed twice due to oil leaks..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FTHF26H7JK. Ford F250 1988 problem was reported in GREENTOWN, PA. Vehicle was not using Cruise Control. Ford F250 1988 Power Train Axle AssemblyFord F250 1988 Power Train Axle Assembly Review #977135 FORD F250 1988 car safety problem was reported on Nov 28, 1995.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with POWER TRAIN:AXLE ASSEMBLY . failure on the rear axle caused loss of brake ability. tt.0 person(s) were injured. 0 person(s) died.Ford F250 1988 problem was reported in SHARON, CT. Vehicle was not using Cruise Control. Ford F250 1988 Power Train Clutch AssemblyFord F250 1988 Power Train Clutch Assembly Review #977245 FORD F250 1988 car safety problem was reported on .FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with POWER TRAIN:CLUTCH ASSEMBLY . clutch lever mount on the fire wall caused fire wall to crack and the movement of the fire wall will not allow the clutch to operate properly. please describe..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FTHF26M1KP. Ford F250 1988 problem was reported in RESCUE, CA. Vehicle was not using Cruise Control. Ford F250 1988 Electrical System Ignition SwitchFord F250 1988 Electrical System Ignition Switch Review #979053 FORD F250 1988 car safety problem was reported on Feb 12, 1996.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM:IGNITION:SWITCH . ignition switch will not retract back into position when starting vehicle. tt.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FTHF25H3JP. Ford F250 1988 problem was reported in BLANE, MN. Vehicle was not using Cruise Control. Ford F250 1988 Electrical System Wiring Interior/under DashFord F250 1988 Electrical System Wiring Interior/under Dash Review #980020 FORD F250 1988 car safety problem was reported on .FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM:WIRING:INTERIOR/UNDER DASH . while driving, noticed smoke coming from dash, stopped vehicle got out, flames started coming over steering column. *ak.Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FTEF26H5JN. Ford F250 1988 problem was reported in BURLINGTON, NC. Vehicle was not using Cruise Control. Ford F250 1988 Service Brakes, Hydraulic Foundation Components DiscFord F250 1988 Service Brakes, Hydraulic Foundation Components Disc Review #979986 FORD F250 1988 car safety problem was reported on Mar 21, 1995.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC . front brakes overheat and cause complete loss of front brakes. *ak.0 person(s) were injured. 0 person(s) died.Ford F250 1988 problem was reported in FREDERISKBUR, PA. Vehicle was not using Cruise Control. Ford F250 1988 Service Brakes, Hydraulic Foundation Components Disc Review #979986 FORD F250 1988 car safety problem was reported on Mar 21, 1995.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC . front brakes overheat and cause complete loss of front brakes. *ak.0 person(s) were injured. 0 person(s) died.Ford F250 1988 problem was reported in FREDERISKBUR, PA. Vehicle was not using Cruise Control. Ford F250 1988 Electrical System WiringFord F250 1988 Electrical System Wiring Review #982980 FORD F250 1988 car safety problem was reported on Jan 01, 1995.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM:WIRING . interior vehicle fire caused by the electrical wiring catching fire. *ak.Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Ford F250 1988 problem was reported in STONEHAM, MA. Vehicle was not using Cruise Control. Ford F250 1988 Electrical System Wiring Review #982980 FORD F250 1988 car safety problem was reported on Jan 01, 1995.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM:WIRING . interior vehicle fire caused by the electrical wiring catching fire. *ak.Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Ford F250 1988 problem was reported in STONEHAM, MA. Vehicle was not using Cruise Control. Ford F250 1988 Latches/locks/linkages Hood LatchFord F250 1988 Latches/locks/linkages Hood Latch Review #983883 FORD F250 1988 car safety problem was reported on Apr 22, 1996.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with LATCHES/LOCKS/LINKAGES:HOOD:LATCH . hood latch assembly failed when opened, hood flew without any reforcement and broke winshield. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1HGEJ6124TL. Ford F250 1988 problem was reported in ARLINGTON, TX. Vehicle was not using Cruise Control. Ford F250 1988 Latches/locks/linkages Hood Latch Review #983883 FORD F250 1988 car safety problem was reported on Apr 22, 1996.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with LATCHES/LOCKS/LINKAGES:HOOD:LATCH . hood latch assembly failed when opened, hood flew without any reforcement and broke winshield. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1HGEJ6124TL. Ford F250 1988 problem was reported in ARLINGTON, TX. Vehicle was not using Cruise Control. Ford F250 1988 Service Brakes, Hydraulic Foundation Components DiscFord F250 1988 Service Brakes, Hydraulic Foundation Components Disc Review #503751 FORD F250 1988 car safety problem was reported on Feb 01, 1992.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC . front brakes failed five times. (first vehicle on 601427) *dsh.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FTGS24H0JH. Ford F250 1988 problem was reported in ELKRIDGE, MD. Vehicle was not using Cruise Control. Ford F250 1988 Power Train Axle Assembly Axle Shaft SealFord F250 1988 Power Train Axle Assembly Axle Shaft Seal Review #503751 FORD F250 1988 car safety problem was reported on Feb 01, 1992.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with POWER TRAIN:AXLE ASSEMBLY:AXLE SHAFT:SEAL . rear brakes failed four times due to axle seals leaking..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FTGS24H0JH. Ford F250 1988 problem was reported in ELKRIDGE, MD. Vehicle was not using Cruise Control. Ford F250 1988 Service Brakes, Hydraulic Foundation Components Disc CaliperFord F250 1988 Service Brakes, Hydraulic Foundation Components Disc Caliper Review #504549 FORD F250 1988 car safety problem was reported on Feb 20, 1996.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER . brake caliper retaining pins fall out. *dsh.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FTEF26YXJC. Ford F250 1988 problem was reported in TUSTIN, MI. Vehicle was not using Cruise Control. Ford F250 1988 Exterior Lighting Headlights High/low Beam Dimmer SwitchFord F250 1988 Exterior Lighting Headlights High/low Beam Dimmer Switch Review #504549 FORD F250 1988 car safety problem was reported on Feb 20, 1996.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with EXTERIOR LIGHTING:HEADLIGHTS:HIGH/LOW BEAM DIMMER SWITCH . headlight dimmer switch shorted, causing fire..Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FTEF26YXJC. Ford F250 1988 problem was reported in TUSTIN, MI. Vehicle was not using Cruise Control. Ford F250 1988 Steering Gear Box (other Than Rack And Pinion)Ford F250 1988 Steering Gear Box (other Than Rack And Pinion) Review #484487 FORD F250 1988 car safety problem was reported on Apr 27, 1995.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with STEERING:GEAR BOX (OTHER THAN RACK AND PINION) . problems with steering gear box. *dh.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FTHF26H7JK. Ford F250 1988 problem was reported in GREENTOWN, PA. Vehicle was not using Cruise Control. Ford F250 1988 Fuel System, Gasoline Fuel Injection SystemFord F250 1988 Fuel System, Gasoline Fuel Injection System Review #484487 FORD F250 1988 car safety problem was reported on Apr 27, 1995.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM . manifold excessively noisy, leaks fumes into passenger area..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FTHF26H7JK. Ford F250 1988 problem was reported in GREENTOWN, PA. Vehicle was not using Cruise Control. Ford F250 1988 Electrical System IgnitionFord F250 1988 Electrical System Ignition Review #986937 FORD F250 1988 car safety problem was reported on .FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM:IGNITION . fresno replaced a piece in the ignition switch, and now the ignition switch and the indicator /column shifter don't work (recall 96v071000. *ak.Vehicle Identification Number (VIN):1FTHX25G3JK. Ford F250 1988 problem was reported in FRESNO, CA. Vehicle was not using Cruise Control. Ford F250 1988 Electrical System Wiring Front UnderhoodFord F250 1988 Electrical System Wiring Front Underhood Review #800341 FORD F250 1988 car safety problem was reported on July 31, 1996.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM:WIRING:FRONT UNDERHOOD . while vehicle was parked, vehicle caught fire under the hood. *ak *slc .Vehicle was on fire. Vehicle Identification Number (VIN):2FTEF26H3JC. Ford F250 1988 problem was reported in WINDSOR, NY. Vehicle was purchased on Feb 01, 1988. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford F250 1988 drive type:4WD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford F250 1988 TRANSMISSION TYPE: AUTO. Ford F250 1988 Engine And Engine Cooling Engine GasolineFord F250 1988 Engine And Engine Cooling Engine Gasoline Review #800341 FORD F250 1988 car safety problem was reported on July 31, 1996.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with ENGINE AND ENGINE COOLING:ENGINE:GASOLINE . while vehicle was parked, vehicle caught fire under the hood. *ak *slc .Vehicle was on fire. Vehicle Identification Number (VIN):2FTEF26H3JC. Ford F250 1988 problem was reported in WINDSOR, NY. Vehicle was purchased on Feb 01, 1988. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford F250 1988 drive type:4WD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford F250 1988 TRANSMISSION TYPE: AUTO. Ford F250 1988 Service Brakes, Hydraulic Foundation ComponentsFord F250 1988 Service Brakes, Hydraulic Foundation Components Review #506572 FORD F250 1988 car safety problem was reported on Aug 04, 1994.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS . vehicle veered to left upon applying brakes in emergency situation, causing accident/injuries. *aw.Vehicle was involved in a crash. 3 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FTFF25H8JL. Ford F250 1988 problem was reported in ALNA, ME. Accident was reported to Police. Vehicle was purchased on Mar 12, 1994. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford F250 1988 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford F250 1988 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 25 mph. Ford F250 1988 Vehicle Speed ControlFord F250 1988 Vehicle Speed Control Review #508222 FORD F250 1988 car safety problem was reported on Aug 26, 1996.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with VEHICLE SPEED CONTROL . throttle linkage sticks, causing sudden acceleration..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FTHF26G3JP. Ford F250 1988 problem was reported in MAPLEWOOD, MN. Vehicle was purchased on Apr 01, 1990. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Ford F250 1988 drive type:4WD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford F250 1988 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 30 mph. Ford F250 1988 Engine And Engine Cooling Engine GasolineFord F250 1988 Engine And Engine Cooling Engine Gasoline Review #502262 FORD F250 1988 car safety problem was reported on Mar 03, 1996.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with ENGINE AND ENGINE COOLING:ENGINE:GASOLINE . engine replaced..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FTEF26N8JN. Ford F250 1988 problem was reported in CHESTER, NY. Vehicle was purchased on Jan 01, 1989. Vehicle was not using Cruise Control. Ford F250 1988 Electrical System Ignition SwitchFord F250 1988 Electrical System Ignition Switch Review #502262 FORD F250 1988 car safety problem was reported on Jan 24, 1996.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM:IGNITION:SWITCH . ignition switch fire..Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FTEF26N8JN. Ford F250 1988 problem was reported in CHESTER, NY. Accident was reported to Police. Vehicle was purchased on Jan 01, 1989. Vehicle was not using Cruise Control. Ford F250 1988 Electrical System Ignition Switch Review #803563 FORD F250 1988 car safety problem was reported on July 09, 1994.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM:IGNITION:SWITCH . truck was parked and caught on fire , received a recall letter . *ak fire possibily started under dash according to report.*jb.Vehicle was on fire. Vehicle Identification Number (VIN):1FTEF26H1JN. Ford F250 1988 problem was reported in LITTLETON, NH. Original Owner. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford F250 1988 drive type:4WD. FUEL TYPE: GAS. Ford F250 1988 Electrical System Wiring Interior/under DashFord F250 1988 Electrical System Wiring Interior/under Dash Review #803563 FORD F250 1988 car safety problem was reported on July 09, 1994.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM:WIRING:INTERIOR/UNDER DASH . truck was parked and caught on fire , received a recall letter . *ak fire possibily started under dash according to report.*jb.Vehicle was on fire. Vehicle Identification Number (VIN):1FTEF26H1JN. Ford F250 1988 problem was reported in LITTLETON, NH. Original Owner. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford F250 1988 drive type:4WD. FUEL TYPE: GAS. Ford F250 1988 Fuel System, Gasoline Storage Auxillary Tank Selector DevicesFord F250 1988 Fuel System, Gasoline Storage Auxillary Tank Selector Devices Review #806015 FORD F250 1988 car safety problem was reported on .FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with FUEL SYSTEM, GASOLINE:STORAGE:AUXILLARY TANK:SELECTOR DEVICES . when the rear tank is being used fuel will transfer from rear to front, causing fuel leakage to occur. please give further details. *ak.Ford F250 1988 problem was reported in TYLER, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford F250 1988 Power Train Clutch Assembly Pedal/linkageFord F250 1988 Power Train Clutch Assembly Pedal/linkage Review #516084 FORD F250 1988 car safety problem was reported on Feb 01, 1997.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with POWER TRAIN:CLUTCH ASSEMBLY:PEDAL/LINKAGE . fire wall in the clutch linkage area broke, resulting in the clutch becoming very hard to disengage..0 person(s) died.Vehicle Identification Number (VIN):1FTHF25MOJN. Ford F250 1988 problem was reported in MEMPHIS, TN. Vehicle was purchased on Nov 01, 1996. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford F250 1988 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: DIESEL. Ford F250 1988 TRANSMISSION TYPE: MAN . Ford F250 1988 WheelsFord F250 1988 Wheels Review #514876 FORD F250 1988 car safety problem was reported on .FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with WHEELS . right rear set of dual wheels came off. (new jersey police report).0 person(s) died.Vehicle Identification Number (VIN):2FDLF47M4JC. Ford F250 1988 problem was reported in JAMESBURG, NJ. Vehicle was not using Cruise Control. Ford F250 1988 Electrical System Fuses And Circuit BreakersFord F250 1988 Electrical System Fuses And Circuit Breakers Review #513043 FORD F250 1988 car safety problem was reported on .FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM:FUSES AND CIRCUIT BREAKERS . fuses melted inside fuse box..0 person(s) died.Ford F250 1988 problem was reported in UNK, 00. Original Owner. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford F250 1988 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: DIESEL. Ford F250 1988 TRANSMISSION TYPE: AUTO. Ford F250 1988 Exterior Lighting HeadlightsFord F250 1988 Exterior Lighting Headlights Review #518287 FORD F250 1988 car safety problem was reported on Jan 01, 1990.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with EXTERIOR LIGHTING:HEADLIGHTS . plastic headlight lense deteriorates to the degree of changing colors, changes from clear to opaque, resulting in decreased illumination of road surfaces during night driving..0 person(s) died.Vehicle Identification Number (VIN):1FTHX26H0JK. Ford F250 1988 problem was reported in SAN DIEGO, CA. Original Owner. Vehicle was purchased on Apr 01, 1997. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford F250 1988 drive type:4WD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford F250 1988 TRANSMISSION TYPE: AUTO. Ford F250 1988 Service Brakes, Hydraulic Foundation Components Master CylinderFord F250 1988 Service Brakes, Hydraulic Foundation Components Master Cylinder Review #814474 FORD F250 1988 car safety problem was reported on June 29, 1997.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER . brakes:coming down a mountain, hit brakes and there were no brakes. front brake line had hole, causing fluid to disappear from master cylinder, leaving vehicle with no brakes at all..Vehicle Identification Number (VIN):1FTHF26MOJN. Ford F250 1988 problem was reported in MADISON HEIGHTS, VA. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford F250 1988 drive type:4WD. FUEL SYSTEM:N/A. FUEL TYPE: DIESEL. Ford F250 1988 TRANSMISSION TYPE: AUTO. Ford F250 1988 Structure Frame And MembersFord F250 1988 Structure Frame And Members Review #515709 FORD F250 1988 car safety problem was reported on .FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with STRUCTURE:FRAME AND MEMBERS . the consumer found conflicting information concerning vehicle capacity..0 person(s) died.Ford F250 1988 problem was reported in EUGENE, OR. Vehicle was not using Cruise Control. Ford F250 1988 Electrical System Wiring Front UnderhoodFord F250 1988 Electrical System Wiring Front Underhood Review #816913 FORD F250 1988 car safety problem was reported on Oct 02, 1997.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM:WIRING:FRONT UNDERHOOD . the vehicle was parked while consumer was inside the house, when he come out the vehicle was on fire, according to cnsumer, the fire started in the engine under the hood, the engine melted. *ak.Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FTHF26H7JC. Ford F250 1988 problem was reported in COMMACK, NY. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph. Ford F250 1988 Seat Belts Front AnchorageFord F250 1988 Seat Belts Front Anchorage Review #538590 FORD F250 1988 car safety problem was reported on .FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with SEAT BELTS:FRONT:ANCHORAGE . seat belt failed..0 person(s) died.Vehicle Identification Number (VIN):1FTEF25N4JP. Ford F250 1988 problem was reported in PALMDALE, CA. Original Owner. Vehicle was purchased on Mar 24, 1988. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford F250 1988 TRANSMISSION TYPE: AUTO. Ford F250 1988 Structure BodyFord F250 1988 Structure Body Review #523580 FORD F250 1988 car safety problem was reported on Sept 24, 1997.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with STRUCTURE:BODY . clutch went through fire wall, due to lack of reinforcement in the fire wall..0 person(s) died.Vehicle Identification Number (VIN):1FTHX25G2JK. Ford F250 1988 problem was reported in GERING, NE. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford F250 1988 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford F250 1988 TRANSMISSION TYPE: MAN . Ford F250 1988 Suspension RearFord F250 1988 Suspension Rear Review #523588 FORD F250 1988 car safety problem was reported on Apr 01, 1995.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with SUSPENSION:REAR . rear brake draggs, replace rear axle bearings and seals on three occasions, proble still exist..Ford F250 1988 problem was reported in WOODBRIDGE, VA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford F250 1988 Structure BodyFord F250 1988 Structure Body Review #538046 FORD F250 1988 car safety problem was reported on .FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with STRUCTURE:BODY . firewall cracked around master cylinder/clutch area..Vehicle Identification Number (VIN):1FTHX26G4JK. Ford F250 1988 problem was reported in WESTMINSTE, MD. Original Owner. Vehicle was purchased on Feb 01, 1988. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford F250 1988 drive type:4WD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford F250 1988 TRANSMISSION TYPE: MAN . Ford F250 1988 Fuel System, Gasoline Storage Auxillary Tank Selector DevicesFord F250 1988 Fuel System, Gasoline Storage Auxillary Tank Selector Devices Review #830975 FORD F250 1988 car safety problem was reported on Aug 01, 1998.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with FUEL SYSTEM, GASOLINE:STORAGE:AUXILLARY TANK:SELECTOR DEVICES . due to a defective fuel check valve the rear fuel tank pumps gas in to the front fuel tank which causes fuel spillage. recall on 1989 ford f250. *ak.Vehicle Identification Number (VIN):2FTHF26H7JA. Ford F250 1988 problem was reported in MARS, PA. Vehicle was purchased on July 12, 1989. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford F250 1988 drive type:4WD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford F250 1988 TRANSMISSION TYPE: MAN . Ford F250 1988 Power Train Automatic Transmission Cooling Unit And LinesFord F250 1988 Power Train Automatic Transmission Cooling Unit And Lines Review #542232 FORD F250 1988 car safety problem was reported on .FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION:COOLING UNIT AND LINES . transmission line failed..Vehicle Identification Number (VIN):1FTHF26H8JN. Ford F250 1988 problem was reported in LANESVILLE, NY. Vehicle was purchased on July 27, 1997. Vehicle was using Cruise Control.Ford F250 1988 drive type:4WD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford F250 1988 TRANSMISSION TYPE: AUTO. Ford F250 1988 Electrical System Ignition SwitchFord F250 1988 Electrical System Ignition Switch Review #542232 FORD F250 1988 car safety problem was reported on .FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM:IGNITION:SWITCH . ignition switch failed..Vehicle Identification Number (VIN):1FTHF26H8JN. Ford F250 1988 problem was reported in LANESVILLE, NY. Vehicle was purchased on July 27, 1997. Vehicle was using Cruise Control.Ford F250 1988 drive type:4WD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford F250 1988 TRANSMISSION TYPE: AUTO. Ford F250 1988 Fuel System, Gasoline Storage Tank AssemblyFord F250 1988 Fuel System, Gasoline Storage Tank Assembly Review #542232 FORD F250 1988 car safety problem was reported on .FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY . gas tank failed..Vehicle Identification Number (VIN):1FTHF26H8JN. Ford F250 1988 problem was reported in LANESVILLE, NY. Vehicle was purchased on July 27, 1997. Vehicle was using Cruise Control.Ford F250 1988 drive type:4WD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford F250 1988 TRANSMISSION TYPE: AUTO. Ford F250 1988 Fuel System, Gasoline Delivery Fuel PumpFord F250 1988 Fuel System, Gasoline Delivery Fuel Pump Review #542232 FORD F250 1988 car safety problem was reported on .FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP . fuel pump failed..Vehicle Identification Number (VIN):1FTHF26H8JN. Ford F250 1988 problem was reported in LANESVILLE, NY. Vehicle was purchased on July 27, 1997. Vehicle was using Cruise Control.Ford F250 1988 drive type:4WD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford F250 1988 TRANSMISSION TYPE: AUTO. Ford F250 1988 Electrical System IgnitionFord F250 1988 Electrical System Ignition Review #542232 FORD F250 1988 car safety problem was reported on Oct 05, 1998.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM:IGNITION . ignition coil failed..Vehicle Identification Number (VIN):1FTHF26H8JN. Ford F250 1988 problem was reported in LANESVILLE, NY. Vehicle was purchased on July 27, 1997. Vehicle was using Cruise Control.Ford F250 1988 drive type:4WD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford F250 1988 TRANSMISSION TYPE: AUTO. Ford F250 1988 Electrical System Wiring Interior/under DashFord F250 1988 Electrical System Wiring Interior/under Dash Review #542232 FORD F250 1988 car safety problem was reported on Oct 19, 1998.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM:WIRING:INTERIOR/UNDER DASH . ignition module failed..Vehicle Identification Number (VIN):1FTHF26H8JN. Ford F250 1988 problem was reported in LANESVILLE, NY. Vehicle was purchased on July 27, 1997. Vehicle was using Cruise Control.Ford F250 1988 drive type:4WD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford F250 1988 TRANSMISSION TYPE: AUTO. Ford F250 1988 Seat Belts Front AnchorageFord F250 1988 Seat Belts Front Anchorage Review #543868 FORD F250 1988 car safety problem was reported on .FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with SEAT BELTS:FRONT:ANCHORAGE . seat belt failed..Vehicle Identification Number (VIN):1FTEF25N4JP. Ford F250 1988 problem was reported in PALMDALE, CA. Vehicle was purchased on Feb 08, 1988. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford F250 1988 TRANSMISSION TYPE: AUTO. Ford F250 1988 Service Brakes, Hydraulic Foundation Components DrumFord F250 1988 Service Brakes, Hydraulic Foundation Components Drum Review #824904 FORD F250 1988 car safety problem was reported on .FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM . owner had recall work done on ignition switch and brakes on june 22,1998 (recall # 92v026000, 96v071000). 6 days later, owner was driving vehicle and smelled smoke, soon after brake loss and ignition switch failure occurred; vehicle would not shut off. the parts that were worked on failed, but ford denies responsibility. *ak.Vehicle was on fire. Vehicle Identification Number (VIN):1FTHF26MJ1C. Ford F250 1988 problem was reported in HIGH RIDGE, MO. Accident was reported to Police. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford F250 1988 drive type:4WD. FUEL SYSTEM:N/A. FUEL TYPE: DIESEL. Ford F250 1988 TRANSMISSION TYPE: MAN . VEHICLE SPEED: 25 mph. Ford F250 1988 Electrical System Ignition SwitchFord F250 1988 Electrical System Ignition Switch Review #824904 FORD F250 1988 car safety problem was reported on .FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM:IGNITION:SWITCH . owner had recall work done on ignition switch and brakes on june 22,1998 (recall # 92v026000, 96v071000). 6 days later, owner was driving vehicle and smelled smoke, soon after brake loss and ignition switch failure occurred; vehicle would not shut off. the parts that were worked on failed, but ford denies responsibility. *ak.Vehicle was on fire. Vehicle Identification Number (VIN):1FTHF26MJ1C. Ford F250 1988 problem was reported in HIGH RIDGE, MO. Accident was reported to Police. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford F250 1988 drive type:4WD. FUEL SYSTEM:N/A. FUEL TYPE: DIESEL. Ford F250 1988 TRANSMISSION TYPE: MAN . VEHICLE SPEED: 25 mph. Ford F250 1988 Power Train Automatic TransmissionFord F250 1988 Power Train Automatic Transmission Review #706811 FORD F250 1988 car safety problem was reported on May 15, 1999.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . transmission should not have failed at such low mileage. *ak.Ford F250 1988 problem was reported in PORTLAND, CT. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford F250 1988 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford F250 1988 TRANSMISSION TYPE: AUTO. Ford F250 1988 Fuel System, Gasoline Fuel Injection SystemFord F250 1988 Fuel System, Gasoline Fuel Injection System Review #838269 FORD F250 1988 car safety problem was reported on Apr 14, 1999.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM . consumer parked vehicle outside front of house; approximately two minutes later was informed of vehicle being on fire. dealer/manufacturer. notified and had nothing postive to say. seeking help from nhtsa in this matter. *ak.Vehicle was on fire. Vehicle Identification Number (VIN):1FTHF26H2JN. Ford F250 1988 problem was reported in POUGHKEEPFIE, NY. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Ford F250 1988 Service Brakes, Hydraulic AntilockFord F250 1988 Service Brakes, Hydraulic Antilock Review #845186 FORD F250 1988 car safety problem was reported on July 02, 1999.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC:ANTILOCK . when brakes were applied pedal went to the floor, resulting in a collision. *ak.Vehicle was involved in a crash. Ford F250 1988 problem was reported in ANGOLA, NY. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Ford F250 1988 Service Brakes, Hydraulic Antilock Review #846540 FORD F250 1988 car safety problem was reported on .FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC:ANTILOCK . when applying the abs brakes on dry pavement pedal goes to the floor, causing extended stopping distance. please give any further details. *ak.Ford F250 1988 problem was reported in ANGELA, NY. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Ford F250 1988 Service Brakes, Hydraulic Antilock Review #548839 FORD F250 1988 car safety problem was reported on .FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC:ANTILOCK . anti lock brake failure causing extensive damage to 40' coachman rv when accident occurred. mjs.Ford F250 1988 problem was reported in ANGOLA, NY. Original Owner. Vehicle was purchased on Oct 14, 1987. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Ford F250 1988 Service Brakes, Hydraulic Antilock Review #548839 FORD F250 1988 car safety problem was reported on .FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC:ANTILOCK . anti lock brake failure causing extensive damage to 40' coachman rv when accident occurred. mjs.Ford F250 1988 problem was reported in ANGOLA, NY. Original Owner. Vehicle was purchased on Oct 14, 1987. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Ford F250 1988 Fuel System, Gasoline Storage Auxillary TankFord F250 1988 Fuel System, Gasoline Storage Auxillary Tank Review #854202 FORD F250 1988 car safety problem was reported on .FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with FUEL SYSTEM, GASOLINE:STORAGE:AUXILLARY TANK . when the dual frontal tank are full consumer notices fuel leakage coming from the front tank, causing a fire hazard. consumer has yet to have parts replaced. please provide any further details. *ak.Vehicle Identification Number (VIN):NOT AVAILAB. Ford F250 1988 problem was reported in ROCKAWAY, NJ. Original Owner. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford F250 1988 Fuel System, Gasoline Storage Auxillary Tank Selector DevicesFord F250 1988 Fuel System, Gasoline Storage Auxillary Tank Selector Devices Review #716943 FORD F250 1988 car safety problem was reported on Dec 08, 1999.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with FUEL SYSTEM, GASOLINE:STORAGE:AUXILLARY TANK:SELECTOR DEVICES . dual fuel tanks switching module failed, causing fuel to spew from rear tank---as per report on 1990 to 1993 models. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FTHF26GXJN. Ford F250 1988 problem was reported in SUNBURY, OH. Original Owner. Vehicle was purchased on July 01, 1988. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Ford F250 1988 drive type:4WD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph. Ford F250 1988 Service Brakes, Hydraulic Foundation Components DiscFord F250 1988 Service Brakes, Hydraulic Foundation Components Disc Review #719957 FORD F250 1988 car safety problem was reported on .FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC . on the brake system failures ford issued a recall and installed insulators on the calipers to cure the problem and ever would pay for the replacement of parts and labor due tpo the initial problem . also ford recalled the vehicle on the paint and when after 2 years of trying to get ford to do something they said i had to many miles on the truck . this is no way to treat a customer *ak.Vehicle Identification Number (VIN):1FTHF25MXJN. Ford F250 1988 problem was reported in TRENTON, AK. Original Owner. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Ford F250 1988 drive type:RWD. FUEL TYPE: DIESEL. Ford F250 1988 Structure BodyFord F250 1988 Structure Body Review #719957 FORD F250 1988 car safety problem was reported on .FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with STRUCTURE:BODY . on the brake system failures ford issued a recall and installed insulators on the calipers to cure the problem and ever would pay for the replacement of parts and labor due tpo the initial problem . also ford recalled the vehicle on the paint and when after 2 years of trying to get ford to do something they said i had to many miles on the truck . this is no way to treat a customer *ak.Vehicle Identification Number (VIN):1FTHF25MXJN. Ford F250 1988 problem was reported in TRENTON, AK. Original Owner. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Ford F250 1988 drive type:RWD. FUEL TYPE: DIESEL. Ford F250 1988 Service Brakes, Hydraulic Foundation Components Disc CaliperFord F250 1988 Service Brakes, Hydraulic Foundation Components Disc Caliper Review #858578 FORD F250 1988 car safety problem was reported on Mar 15, 2000.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER . brake caliper mount is spreading on both sides of the vehicle. there's is a banging and squealing noise, and is very hard to stop vehicle. consumer will call the manufacturer to get answers to why it's happening. *ak.Vehicle Identification Number (VIN):1FPEF26N1JN. Ford F250 1988 problem was reported in HARRIS, NY. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford F250 1988 Tires Tread/beltFord F250 1988 Tires Tread/belt Review #733166 FORD F250 1988 car safety problem was reported on .FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with TIRES:TREAD/BELT . tread seperated from the tire - no blow out.*ak (dot number: *t*16x6k tiresize: 85r16m/s).Vehicle Identification Number (VIN):1FTHF25H4JK. Ford F250 1988 problem was reported in HAMMOND, IN. Original Owner. Vehicle was purchased on Nov 01, 1988. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Ford F250 1988 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford F250 1988 Structure Frame And Members Underbody ShieldsFord F250 1988 Structure Frame And Members Underbody Shields Review #555336 FORD F250 1988 car safety problem was reported on .FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with STRUCTURE: FRAME AND MEMBERS:UNDERBODY SHIELDS . firewall sheet metal failure due to metal fatigue, clutch and brake are too much force for the design and gauge of the firewall. *slc.Vehicle Identification Number (VIN):1FTHX25GXJK. Ford F250 1988 problem was reported in SANTA BARBARA, CA. Vehicle was using Cruise Control.Ford F250 1988 drive type:RWD. Ford F250 1988 TRANSMISSION TYPE: MAN . Ford F250 1988 Electrical System IgnitionFord F250 1988 Electrical System Ignition Review #873259 FORD F250 1988 car safety problem was reported on .FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM:IGNITION . when driving at any speed without prior warning vehicle cut off/ engine die out completely. consumer has contacted dealer , dealer was unable to determine the cause of the problem. please provide any further details.*ak.Vehicle Identification Number (VIN):1FTFF25Y7JP. Ford F250 1988 problem was reported in DENVER, CO. Original Owner. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford F250 1988 Electrical System Ignition Review #873253 FORD F250 1988 car safety problem was reported on .FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM:IGNITION . while driving vehicle will completely shut down without warning, cause unknown. dealer cannot identify the problem. please give any further details.*ak.Vehicle Identification Number (VIN):1FT2S25Y7JP. Ford F250 1988 problem was reported in DENVER, CO. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford F250 1988 Tires Temporary/emergency Spare TireFord F250 1988 Tires Temporary/emergency Spare Tire Review #557969 FORD F250 1988 car safety problem was reported on Sept 30, 2000.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with TIRES:TEMPORARY/EMERGENCY SPARE TIRE . while driving, consumer noticed the spare tire on fire, the tire was mounted underneath the bed against the tailpipe. (ohio traffic crash report) *slc.Vehicle was on fire. Vehicle Identification Number (VIN):1FTHF2G0JN8. Ford F250 1988 problem was reported in LAMBERTVILLE, MI. Accident was reported to Police. Vehicle was not using Cruise Control. VEHICLE SPEED: 63 mph. Ford F250 1988 Tires Tread/beltFord F250 1988 Tires Tread/belt Review #878307 FORD F250 1988 car safety problem was reported on Nov 11, 2000.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with TIRES:TREAD/BELT . pe 00 040/tire tread separation/tire failure: left front tire was flat while traveling at 45 mph, on a 1988, ford, f250 with after market equipment, tire size lt235/85r16, dot# unvailable. noticed multiple hair line cracks where tread met tire. firestone notified. please feel free to provide rovide any further details on this matter. *ak.Vehicle Identification Number (VIN):1FTHJ26MZXK. Ford F250 1988 problem was reported in BANKS, OR. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford F250 1988 SeatsFord F250 1988 Seats Review #888994 FORD F250 1988 car safety problem was reported on .FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with SEATS . bolts and nuts that attach seat to to frame of vehicle have started to pull through floorboard.*ak consumer states the right front nut was detached from the floor which is a safety issue, also the left rear nut was partially broken loose.*jb.Vehicle Identification Number (VIN):1FTHX26M8JK. Ford F250 1988 problem was reported in EUGENE, OR. Vehicle was purchased on Dec 01, 1996. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford F250 1988 drive type:4WD. FUEL SYSTEM:N/A. FUEL TYPE: DIESEL. Ford F250 1988 TRANSMISSION TYPE: MAN . Ford F250 1988 Electrical SystemFord F250 1988 Electrical System Review #10016062 FORD F250 1988 car safety problem was reported on Apr 14, 2003.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM . it took numerous tries to get the vehicle to start. *jb.Vehicle Identification Number (VIN):1FTHF25G1JP. Ford F250 1988 problem was reported in HOLLISTER, CA. Original Owner. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Ford F250 1988 Tires Tread/beltFord F250 1988 Tires Tread/belt Review #10026627 FORD F250 1988 car safety problem was reported on July 03, 2003.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with TIRES:TREAD/BELT . while driving, tire tread wore off the tire. dealer notified. *ak the first tire bubbled air under the tread and was adjusted at 11k miles. the second and third tires also had air bubbles under the tread and had separated from the casing at 14k miles. *scc *jb.Mileage was 144000 miles. Ford F250 1988 problem was reported in LINWOOD, KS. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 8 CYLINDERS. FUEL TYPE: GAS. Ford F250 1988 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 55 mph. Ford F250 1988 Fuel System, Gasoline Storage Tank AssemblyFord F250 1988 Fuel System, Gasoline Storage Tank Assembly Review #10096680 FORD F250 1988 car safety problem was reported on Oct 12, 2004.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY . while driving,the consumer heard a loud noise coming from the rear, the consumer was able to pull over. the consumer noticed that the exploded. no injuries. the consumer was able to transfer the fuel to the second tank and drove it to the dealer for inspection. the mechanic informed the driver that the fuel tank needed replacement. please fill in additional information. *jb the vehicles engine died as a result of the explosion. the consumer switched tanks and was able to drive to an independent garage. the garage removed the gas tank. tank was three times the normal size. when tank exploded it bent the vross member in front of the tank causing the bed of the truck to now be bowed where the tank was. *tc.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FTHF26H2JC. Ford F250 1988 problem was reported in WEXFORD, PA. Original Owner. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 8 CYLINDERS. Ford F250 1988 drive type:4WD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Ford F250 1988 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 65 mph. Ford F250 1988 Electrical SystemFord F250 1988 Electrical System Review #10175391 FORD F250 1988 car safety problem was reported on Sept 09, 2006.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM . 1988 ford f-250's engine compartment caught on fire. *ts while driving the consumer noticed smoke coming from the engine compartment. the consumer pulled the vehicle onto the shoulder. that's when the consumer noticed that the vehicle was on fire. the consumer attempted to put the fire out but was not successful. *nm.Vehicle was on fire. Ford F250 1988 problem was reported in EAST LIVERPOOL, OH. Accident was reported to Police. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford F250 1988 Engine And Engine Cooling EngineFord F250 1988 Engine And Engine Cooling Engine Review #10175391 FORD F250 1988 car safety problem was reported on Sept 09, 2006.FORD F250 1988, manufactured by FORD MOTOR COMPANY had a problem with ENGINE AND ENGINE COOLING:ENGINE . 1988 ford f-250's engine compartment caught on fire. *ts while driving the consumer noticed smoke coming from the engine compartment. the consumer pulled the vehicle onto the shoulder. that's when the consumer noticed that the vehicle was on fire. the consumer attempted to put the fire out but was not successful. *nm.Vehicle was on fire. Ford F250 1988 problem was reported in EAST LIVERPOOL, OH. Accident was reported to Police. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. |
-
Ford F250 1988 Forum
Discuss and Report Ford F250 Problems -
Service Bulletins
View Recent Ford F250 1988 repair guidance -
Recalls
Latest recall and safety Ford F250 1988 information
Ford F250 1988 Systems
Search 1000s of Car Reviews, Recalls and Technical Bulletins
Start by entering a car model, system, manufacturer or any combination of keywords.
Ford F250 1988 Reports
my 95 ford exploere engine surges when turn my air conditioner on Ihave a 1994 ford probe which has started to idle very low and stalls at times. It is a 4 cyl. w/ air and a 5 speed. any ideas? I replaced the fuel filter, air flow meter and added HEAT to gas tank to dry and clean fuel system. I think my pcv valv should a standard transmission truck start when it is in gear without the clucth engaged? should a 2005 standard transmission ford ranger start when in gear without the clutch engaged? 96 Ford F250 Emergency brake lever gets caught on the auto adjustment spring, causing brakes to be permanently engaged, also allowing the parking break lever to rub against the hub, which can cut through over time. try pushing the pedals button closer to you. you must have the pedal adjustment button to the left of the radio, looks like a foot, that brings the pedals more inward towards the driver. hope it helped. or look carefully if a wire has corroded. it i would check ur multi switch on ur stearing colum on the pedal whats the sound Just bought an '06 E-350 van. Left d'ship got on highway and noticed shimmy when I got to 60....same problem???? that happened to me last night! If you rock the car back and for while shifting then it should release the safety lock! why does it take turning off the veh. while pulling in on the shifter arm, them starting it again while still holding it inwards ever so slightly??