Nissan Power Train Clutch Assembly Pedal/linkage
Car-and-Safety.com | NISSAN>NISSAN Power Train Clutch Assembly Pedal/linkage
Nissan Power Train Clutch Assembly Pedal/linkage Reports
11 Jan
| NISSAN 200SX 1998 | Since The Second Time The clutch cable was broke till now, the car still sit in the garage of ellis brooks(dealer). the dealer |
| NISSAN 300ZX 1984 | Clutch Disc Failed. |
| NISSAN 300ZX 1984 | Clutch Drags. |
| NISSAN 300ZX 1984 | Pressure Plate Failed. |
| NISSAN PICKUP 1986 | Clutch: Hydraulic Cylinder Failure. *ak |
| NISSAN STANZA 1983 | Clutch Cable Welded To Firewall, increasing friction as cable degrades, causing firewall to rupture/tear away. |
| NISSAN SENTRA 1987 | Clutch Pressure Plate Failed. *dsh |
| NISSAN VERSA 2007 | Clutch Cable/clutch Pedal the clutch cable is connected to the clutch pedal with plastic cap that fits over a metal post on |
| NISSAN ALTIMA 2005 | Clutch Pedal Loses Pressure And car cannot be put into gear. happens while car is in motion. *tr |
| NISSAN ALTIMA 2002 | 2002 Nissan Altima Clutch Issue. *dt the consumer stated the clutch pedal would stick to the floor, not allowing the consumer to |
| NISSAN ALTIMA 2002 | When Shifting Gears In Hot weather after being in city traffic my clutch would only come up approx. 1/4 way from the floor. |
| NISSAN ALTIMA 2006 | Clutch Stuck On Floor, did not return to up position. very difficult to shift gears - clutch engaged about 1/2" from floor. |
| NISSAN 350Z 2007 | Clutch Went Out. *cn |
| NISSAN 350Z 2008 | Recently, I Have Bought a new 2008 nissan 350z. i bought the car on saturday, dec 29. 2007. |
| NISSAN 350Z 2007 | I Experienced A Safety Related issue with my car. while i was driving, shifting from 1st to 2nd gear at about 6, |
| NISSAN 350Z 2007 | Loss Of Clutch Pressure. *tr |
| NISSAN 350Z 2007 | The Clutch On My 2007 350z sounds like it is going to blow up. in traffic i am embarrassed as everyone looks around to |
| NISSAN 350Z 2007 | Having Clutch Issues... pedal sticks, clutch slips.... when taken to repair, "nothing can be done about |
| NISSAN 350Z 2007 | During Heavy Traffic Or Moderate acceleration, my 2007 nissan 350z clutch pedal will fall to the floor, causing the car to lose power |
| NISSAN 350Z 2007 | I Have A 2007 Nissan 350 z and during highway driving the clutch stick to the bottom disable me from shifting and stay on gear |
| NISSAN 350Z 2007 | The Car Was Driving Normally and gave no signs to any type of pending failure. the 2007 350z model year has some form of |
| NISSAN ALTIMA 2005 | On Random Occasions, The clutch pedal looses pressure. it engages and disengages very close to floor. pressing the clutch pedal |
| NISSAN ALTIMA 2005 | Buy 2005 Nissan Altima Ser 02/05, at 4,000 miles the clutch pedal begins to continuously fall to floor, requiring operator to lift |
| NISSAN ALTIMA 2005 | I Have A 2005 Altima and after driving for awhile or when it is hot outside the clutch pedal goes to the floor. when |
| NISSAN ALTIMA 2003 | I Have A 2003 Nissan altima 3.5se with a 5spd manual transmission. i have a recurring problem that my clutch will lose |
| NISSAN MAXIMA 2004 | Manual Clutch Failure. Driving in heavy, slow, traffic or for long distance and many hours of travel would cause the clutch peddle |
| NISSAN 350Z 2004 | Clutch Pedal Stuck To Floor when taking off at a green light - half a second later, it pops out. clutch, slave |
| NISSAN 350Z 2005 | Clutch Pedal Sticking (holding Down) causing a burn out/acceleration and wearing of clutch. *jb |
| NISSAN MAXIMA 1999 | I Have A Potentially Deadly problem with my 133,000-mile, 1999 nissan maxima. it might be related to the crank sensor on |
| NISSAN ALTIMA 2003 | Tl* - The Contact Called regarding the 2003 nissan altima. the contact stated that during the cold season the clutch stuck to |
| NISSAN ALTIMA 2006 | Tl* The Contact Owns a 2006 nissan altima ser. the clutch has been repaired on 3 occasions since he purchased the vehicle |
| NISSAN ALTIMA 2006 | Power Train Clutch Assembly/ Pedal/ linkage i recently bought a brand new 2006 nissan altima ser in 6 speed manual transmission. after |
| NISSAN 200SX 1996 | Manual Transmission Clutch Cable Failed, unable to change gears while driving. this condition was intermittent and happened three times before dealer was |
| NISSAN QUEST 1999 | The Accelerator Cable On Our 1999 nissan quest failed in 2001, we replaced it, and now in 2005 the cable is failing again. |
| NISSAN XTERRA 2000 | Continuing Poor Clutch Operation. pedal often binds; had to release pedal fully to get cruise control to operate; pedal is nearly |
| NISSAN SENTRA 1999 | I Was Driving At Night, when i noticed that my clutch had a little more "play" in the pedal than normal. i |
| NISSAN FRONTIER 1998 | While Stopped At A Light, the vehicle's clutch pedal support bar broke. as a result, the vehicle accelerated then stalled out. |
| NISSAN PATHFINDER 1996 | Clutch Sticking - Suv Towed to dealer - clutch fluid replaced as possible problem, however, a week later clutch started sticking again when |
| NISSAN ALTIMA 1995 | Vehicle's Welding That Is Connected to the pedal came off, causing vehicle to keep accelerating. dealer notified. please provide additional information.*ak |
On This Page
- Select and View Nissan Power Train Clutch Assembly Pedal/linkage Problems
- Discuss Nissan Power Train Clutch Assembly Pedal/linkage Problems
2010 Nissan Frontier Extended Cab and five foot bed vibrates when starting off from a dead stop.....only lasts a second and again only when starting from a dead stop....dealers answer was has an 80,000 mile power train warranty, drive it till it b I have problem with my Nissan Frontier - it lost power and slowed down on the road. Took it to the dealer and have been told that comp cover was cracked and moisture got in to system. They changed computer - $2100. Dint help, went back, been told 2007 Murano bought new, I have electric power windows, one day I found my windows down but was not sure I had left them down . the 2 front windows were down again much later. Being an electronic technician Anyone having dash warning panel lit up. Had this going on after replacing the battery. Use a portable 12V power supply ON, to the jack inside before disconnecting tha batt. $30 for a 300 amp portable jumper anywhere. OK next replace the chintzy rear power door lift will not work with over head door button or the hand held
I know intermittent problems are hard
remote.