Car-and-Safety.com
Nissan 350z 2008 Safety Reports and Reviews
Nissan 350z Reports
NISSAN 350Z Power Train Clutch Assembly Pedal/linkage
NISSAN 350Z 2008 Power Train Clutch Assembly Pedal/linkage Report #10213335
NISSAN 350Z 2008 car safety problem was reported on Dec 31, 2007.NISSAN 350Z 2008, manufactured by NISSAN NORTH AMERICA, INC. had a problem with POWER TRAIN:CLUTCH ASSEMBLY:PEDAL/LINKAGE . RECENTLY, I HAVE BOUGHT A NEW 2008 NISSAN 350Z. I BOUGHT THE CAR ON SATURDAY, DEC 29. 2007. ON DEC 31 2007, 3 DAYS LATER, THE SLAVE CYLINDER FOR THE CLUTCH WENT OUT. I CAN STILL SHIFT BUT THE CLUTCH PEDAL FEELS VERY VERY WEAK NOW. AND THE "SERVICE ENGINE SOON" LIGHT IS NOW ON. I HAVE NOT BROUGHT IT IN YET, DUE TO IT BEING NEW YEARS DAY, BUT WILL BRING IT IN ON JAN 2 TO GET IT LOOKED AT AND REPLACED.*CN.0 person(s) were injured. 0 person(s) died.Nissan 350z 2008 problem was reported in SUGAR LAND, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. DEALER'S NAME: STERLING MCCALL NISSAN .
Report Your Car Problem Go Top
NISSAN 350Z 2008 Power Train Clutch Assembly Report #10213335
NISSAN 350Z 2008 car safety problem was reported on Dec 31, 2007.NISSAN 350Z 2008, manufactured by NISSAN NORTH AMERICA, INC. had a problem with POWER TRAIN:CLUTCH ASSEMBLY . RECENTLY, I HAVE BOUGHT A NEW 2008 NISSAN 350Z. I BOUGHT THE CAR ON SATURDAY, DEC 29. 2007. ON DEC 31 2007, 3 DAYS LATER, THE SLAVE CYLINDER FOR THE CLUTCH WENT OUT. I CAN STILL SHIFT BUT THE CLUTCH PEDAL FEELS VERY VERY WEAK NOW. AND THE "SERVICE ENGINE SOON" LIGHT IS NOW ON. I HAVE NOT BROUGHT IT IN YET, DUE TO IT BEING NEW YEARS DAY, BUT WILL BRING IT IN ON JAN 2 TO GET IT LOOKED AT AND REPLACED.*CN.0 person(s) were injured. 0 person(s) died.Nissan 350z 2008 problem was reported in SUGAR LAND, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. DEALER'S NAME: STERLING MCCALL NISSAN .
Report Your Car Problem Go Top
NISSAN 350Z Power Train Manual Transmission
NISSAN 350Z 2008 Power Train Manual Transmission Report #10226595
NISSAN 350Z 2008 car safety problem was reported on Apr 02, 2008.NISSAN 350Z 2008, manufactured by NISSAN NORTH AMERICA, INC. had a problem with POWER TRAIN:MANUAL TRANSMISSION . SLAVE CYLINDER IS NOT CREATING ENOUGH PRESSURE AND CAUSING CLUTCH TO SLIP AND BURN. *TR.Nissan 350z 2008 problem was reported in HOUSTON, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.
Report Your Car Problem Go Top
NISSAN 350Z Power Train Automatic Transmission
NISSAN 350Z 2008 Power Train Automatic Transmission Report #10230472
NISSAN 350Z 2008 car safety problem was reported on Jan 01, 2008.NISSAN 350Z 2008, manufactured by NISSAN NORTH AMERICA, INC. had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . AUTOMATIC TRANSMISSION SLAM FROM 2ND TO 3RD GEAR. *TR.0 person(s) were injured. 0 person(s) died.Nissan 350z 2008 problem was reported in GRANADA HILLS, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.
Report Your Car Problem Go Top
NISSAN 350Z Power Train Manual Transmission
NISSAN 350Z 2008 Power Train Manual Transmission Report #10240940
NISSAN 350Z 2008 car safety problem was reported on Aug 28, 2008.NISSAN 350Z 2008, manufactured by NISSAN NORTH AMERICA, INC. had a problem with POWER TRAIN:MANUAL TRANSMISSION . CLUTCH GETS VERY LOOSE AFTER DRIVING A LITTLE BIT. *TR.Nissan 350z 2008 problem was reported in WHITTIER, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.
Report Your Car Problem Go Top
NISSAN 350Z 2008 Power Train Manual Transmission Report #10248526
NISSAN 350Z 2008 car safety problem was reported on July 09, 2008.NISSAN 350Z 2008, manufactured by NISSAN NORTH AMERICA, INC. had a problem with POWER TRAIN:MANUAL TRANSMISSION . CAR WOULD NOT SHIFT SMOOTHLY. DEALER SAYS THE FLYWHEEL IS BROKEN AND CAR NEEDS A NEW CLUTCH. THE CAR HAS 3700 MILES ON IT AND NISSAN WILL NOT COVER THIS UNDER WARRANTY. PROBLEM HAS EXISTED SINCE THE CAR HAD 400 MILES ON IT. *TR.0 person(s) were injured. 0 person(s) died.Mileage was 400 miles. Nissan 350z 2008 problem was reported in LAKE JACKSON, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.
Report Your Car Problem Go Top
NISSAN 350Z 2008 Power Train Report #10248526
NISSAN 350Z 2008 car safety problem was reported on July 09, 2008.NISSAN 350Z 2008, manufactured by NISSAN NORTH AMERICA, INC. had a problem with POWER TRAIN . CAR WOULD NOT SHIFT SMOOTHLY. DEALER SAYS THE FLYWHEEL IS BROKEN AND CAR NEEDS A NEW CLUTCH. THE CAR HAS 3700 MILES ON IT AND NISSAN WILL NOT COVER THIS UNDER WARRANTY. PROBLEM HAS EXISTED SINCE THE CAR HAD 400 MILES ON IT. *TR.0 person(s) were injured. 0 person(s) died.Mileage was 400 miles. Nissan 350z 2008 problem was reported in LAKE JACKSON, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.
Report Your Car Problem Go Top
NISSAN 350Z 2008 Power Train Manual Transmission Report #10250642
NISSAN 350Z 2008 car safety problem was reported on Dec 12, 2007.NISSAN 350Z 2008, manufactured by NISSAN NORTH AMERICA, INC. had a problem with POWER TRAIN:MANUAL TRANSMISSION . HELLO I HAVE A 2008 NISSAN 350Z 6 SPEED MANUAL BASE MODEL, THAT I HAD BROUGHT IN DEC 12 OF 2007 BRAND NEW. SINCE THEN THE CLUTCH ON THE CAR HAS GOTTEN STUCK THREE TIMES. ALL THREE TIMES ARE RANDOM. TWICE WAS ON THE HIGHWAY AND ONCE WHILE DOING A U TURN. THE CAUSE OF THIS IS BURNING UP MY CLUTCH AND THE NISSAN DEALERSHIPS HERE IN THE ORLANDO AREA ARE GIVING ME THE CLASSIC DEALERSHIP RUN AROUND. I CALL NISSAN ON THERE 1-800-NISSAN-1 NUMBER AND SAID THEY CANT DO ANYTHING UNTIL THE DEALER LOOKS AT IT, WITH A POSSIBLE CHARGE OF $600.00 FOR LOOKING IT AT. MY CAR IS AT 22,000 TODAY ON DEC 3 2008. NISSAN POWER TRAIN WARRANTY IS UNTIL 3 YEARS 36,000 MILES, BUT TO CHECK THE CAR IS AT MY COST. NISSAN HAS REPORTED ON THE SLAVER CYLINDER RECALL, BUT THEY SAY THAT'S WHAT MIGHT NOT BE WRONG WITH IT.*TR.0 person(s) were injured. 0 person(s) died.Mileage was 19 miles. Vehicle Identification Number (VIN):JN1BZ34D48M. Nissan 350z 2008 problem was reported in ORLANDO, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.
Report Your Car Problem Go Top
NISSAN 350Z 2008 Power Train Manual Transmission Report #10256026
NISSAN 350Z 2008 car safety problem was reported on Jan 08, 2009.NISSAN 350Z 2008, manufactured by NISSAN NORTH AMERICA, INC. had a problem with POWER TRAIN:MANUAL TRANSMISSION . TL*THE CONTACT OWNS A 2008 NISSAN 350Z. THE CONTACT STATED THAT THE TRANSMISSION GRINDS INTO SECOND GEAR WHEN THE CLUTCH IS FULLY DISENGAGED. IN ADDITION, THE TRANSMISSION STALLS AND IS LESS LIKELY TO GRIND IN SECOND GEAR IN WARM WEATHER CONDITIONS; HOWEVER, THE FAILURE STILL PERSISTS. WHEN SHIFTING FROM 3,500 RPMS TO 4,500 RPMS FROM FIRST TO SECOND GEAR, THE TRANSMISSION WOULD GRIND MORE. THE DEALER ADVISED HIM TO BRING IN THE VEHICLE FOR INSPECTION. THE CONTACT WILL TAKE THE VEHICLE TO THEM WITHIN THE NEXT 24 HOURS. THE FAILURE MILEAGE WAS 4,500 UPDATED 02/24/09. *LJ WHEN THE CONSUMER SHIFTED TO SECOND GEAR FROM FIRST GEAR, THE TRANSMISSION WOULD GRIND AND WOULD NOT ENGAGE. UPDATED 02/26/09. *JB.0 person(s) were injured. 0 person(s) died.Mileage was 4500 miles. Vehicle Identification Number (VIN):JN1BZ34E38M. Nissan 350z 2008 problem was reported in PALM BEACH GARDENS, FL. Original Owner. Vehicle was purchased on 20080630. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Nissan 350z 2008 TRANSMISSION TYPE: MAN . VEHICLE SPEED: 0 mph. DEALER'S NAME: NAPLETON NISSAN . DEALER'S TELEPHONE NUMBER: 561-848-0688 . DEALER'S CITY: WEST PALM BEACH . DEALER'S STATE CODE: FL.
Report Your Car Problem Go Top
NISSAN 350Z 2008 Power Train Manual Transmission Report #10266379
NISSAN 350Z 2008 car safety problem was reported on Feb 15, 2009.NISSAN 350Z 2008, manufactured by NISSAN NORTH AMERICA, INC. had a problem with POWER TRAIN:MANUAL TRANSMISSION . CLUTCH THROWOUT BEARING NOISE & HARD SHIFTING FROM FACTORY. *TR.0 person(s) were injured. 0 person(s) died.Mileage was 1500 miles. Nissan 350z 2008 problem was reported in CUPERTINO, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.
Report Your Car Problem Go Top
NISSAN 350Z 2008 Power Train Manual Transmission Report #10292825
NISSAN 350Z 2008 car safety problem was reported on Nov 17, 2009.NISSAN 350Z 2008, manufactured by NISSAN NORTH AMERICA, INC. had a problem with POWER TRAIN:MANUAL TRANSMISSION . WHEN RPMS ARE HIGH IN FIRST GEAR, THE CLUTCH DISENGAGES TO THE HALFWAY POINT AND YOU LOSE ALL POWER TO THE WHEELS. THIS IS USUALLY FOLLOWED BY A BURNING CLUTCH SMELL. IT IS MY UNDERSTANDING THAT NISSAN RECALLED THE 2007 350Z FOR THE SAME ISSUE (CLUTCH SLAVE CYLINDER), BUT IT'S APPARENT THAT THE PROBLEM CONTINUES WITH THE 2008 MODEL AND I'M ASKING THAT THE NHTSA INSTRUCT NISSAN TO EXTEND THE FIX TO 2008 MODELS. *TR.Mileage was 5500 miles. Vehicle Identification Number (VIN):JN1BZ34E98M. Nissan 350z 2008 problem was reported in SEATTLE, WA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 25 mph.
Report Your Car Problem Go Top
NISSAN 350Z 2008 Power Train Manual Transmission Report #10293739
NISSAN 350Z 2008 car safety problem was reported on Oct 22, 2009.NISSAN 350Z 2008, manufactured by NISSAN NORTH AMERICA, INC. had a problem with POWER TRAIN:MANUAL TRANSMISSION . 2008 NISSAN 350Z NISMO / CLUTCH PEDAL STICKS,WHEN THE GEAR ENGAGES IT`S VERY BOUNCY?. *TR.Mileage was 13000 miles. Vehicle Identification Number (VIN):JN1BZ34E48M. Nissan 350z 2008 problem was reported in UNION, NJ. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 25 mph.
Report Your Car Problem Go Top
NISSAN 350Z 2008 Power Train Manual Transmission Report #10303461
NISSAN 350Z 2008 car safety problem was reported on Jan 31, 2010.NISSAN 350Z 2008, manufactured by NISSAN NORTH AMERICA, INC. had a problem with POWER TRAIN:MANUAL TRANSMISSION . DRIVING ON FREEWAY APPROXIMATELY 70-75 MPH, WHEN APPLYING PRESSURE TO CLUTCH PEDAL I REALIZE THERE IS LITTLE TO NO CLUTCH PEDAL PRESSURE AND CLUTCH PEDAL STICKS TO THE FLOOR AND HAS TO BE PULLED BACK WITH MY FOOT. FELT SLIGHT PEDAL PRESSURE AT THE END OF PEDAL TRAVEL AND DISENGAGED AND CHANGED GEARS INTO NEUTRAL. PUMPED CLUTCH WHILE IN NEUTRAL TO SEE IF CLUTCH PEDAL PRESSURE COULD RETURN TO NORMAL WITH NO SUCCESS. CLUTCH ENGAGEMENT REMAINED THE SAME AT THE VERY END OF TRAVEL AND WOULD NO LONGER GO INTO GEAR. CONTINUED PUMPING CLUTCH PEDAL AND WAS LUCKY TO GET BACK INTO SIXTH GEAR WITH A GRIND INTO GEAR TO CONTINUE DRIVING ON FREEWAY AT SPEED. STILL PEDAL CONTINUED TO STICK HALFWAY OR MORE DOWN AND HAD TO BE RETURNED BACK TO STATIC POSITION MANUALLY. DROVE TO LOCAL DEALER SINCE WAS ON THE WAY TO INTENDED DESTINATION WHERE PROBLEM STILL OCCURRED AND EACH GEAR ENGAGEMENT BEING IRREGULAR TO NORMAL. LEFT CAR AT DEALERS SERVICE DEPARTMENT FOR OVERNIGHT DELIVERY SINCE DEALER SERVICE DEPARTMENT IS CLOSED ON SUNDAYS. CLUTCH PEDAL IS STILL HALFWAY DEPRESSED AS LEFT. *TR.Mileage was 24597 miles. Vehicle Identification Number (VIN):JN1BZ34DX8M. Nissan 350z 2008 problem was reported in MURRIETA, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 75 mph.
Report Your Car Problem Go Top
NISSAN 350Z 2008 Power Train Report #10303461
NISSAN 350Z 2008 car safety problem was reported on Jan 31, 2010.NISSAN 350Z 2008, manufactured by NISSAN NORTH AMERICA, INC. had a problem with POWER TRAIN . DRIVING ON FREEWAY APPROXIMATELY 70-75 MPH, WHEN APPLYING PRESSURE TO CLUTCH PEDAL I REALIZE THERE IS LITTLE TO NO CLUTCH PEDAL PRESSURE AND CLUTCH PEDAL STICKS TO THE FLOOR AND HAS TO BE PULLED BACK WITH MY FOOT. FELT SLIGHT PEDAL PRESSURE AT THE END OF PEDAL TRAVEL AND DISENGAGED AND CHANGED GEARS INTO NEUTRAL. PUMPED CLUTCH WHILE IN NEUTRAL TO SEE IF CLUTCH PEDAL PRESSURE COULD RETURN TO NORMAL WITH NO SUCCESS. CLUTCH ENGAGEMENT REMAINED THE SAME AT THE VERY END OF TRAVEL AND WOULD NO LONGER GO INTO GEAR. CONTINUED PUMPING CLUTCH PEDAL AND WAS LUCKY TO GET BACK INTO SIXTH GEAR WITH A GRIND INTO GEAR TO CONTINUE DRIVING ON FREEWAY AT SPEED. STILL PEDAL CONTINUED TO STICK HALFWAY OR MORE DOWN AND HAD TO BE RETURNED BACK TO STATIC POSITION MANUALLY. DROVE TO LOCAL DEALER SINCE WAS ON THE WAY TO INTENDED DESTINATION WHERE PROBLEM STILL OCCURRED AND EACH GEAR ENGAGEMENT BEING IRREGULAR TO NORMAL. LEFT CAR AT DEALERS SERVICE DEPARTMENT FOR OVERNIGHT DELIVERY SINCE DEALER SERVICE DEPARTMENT IS CLOSED ON SUNDAYS. CLUTCH PEDAL IS STILL HALFWAY DEPRESSED AS LEFT. *TR.Mileage was 24597 miles. Vehicle Identification Number (VIN):JN1BZ34DX8M. Nissan 350z 2008 problem was reported in MURRIETA, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 75 mph.
Report Your Car Problem Go Top
NISSAN 350Z 2008 Power Train Manual Transmission Report #10332579
NISSAN 350Z 2008 car safety problem was reported on May 22, 2008.NISSAN 350Z 2008, manufactured by NISSAN NORTH AMERICA, INC. had a problem with POWER TRAIN:MANUAL TRANSMISSION . THE VEHICLE IS A 2008 350Z ROADSTER WITH 15,000 MILES, AND THE TRANSMISSION WAS REPLACED AT AROUND 7500 MILES (UNDER WARRANTY) DUE TO BEARINGS THAT WERE BROKEN. WHEN THE CAR IS BROUGHT TO MID-HIGH REVS IN 1ST/2ND GEAR, THE CLUTCH WILL DISENGAGE AND FALL TO THE FLOOR. THIS IS ACCOMPANIED BY A VERY STRONG BURNING SMELL (CHARACTERISTIC CLUTCH BURNING SMELL) AND IS EXTREMELY DAMAGING TO THE CLUTCH AND TRANSMISSION. THE CLUTCH PEDAL HAS TO BE PULLED UP MANUALLY AND IS NOTICEABLY SOFTER AFTER THIS HAPPENS. THIS PROBLEM HAS HAPPENED 2-3 TIMES IN THE PAST YEAR. THIS PROBLEM WAS NOTICED IN 2007 350Z'S AND HAS CONTINUED INTO THE 2008 350Z'S. THE 350Z MENTIONED IN THIS REPORT WAS MANUFACTURED IN 10/07. *TR.Mileage was 14500 miles. Nissan 350z 2008 problem was reported in DALLAS, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.
Report Your Car Problem Go Top
NISSAN 350Z 2008 Power Train Report #10463412
NISSAN 350Z 2008 car safety problem was reported on Oct 19, 2011.NISSAN 350Z 2008, manufactured by NISSAN NORTH AMERICA, INC. had a problem with POWER TRAIN . THE CLUTCH SLAVE CYLINDER HAS GONE OUT ON THE VEHICLE 3 TIMES SINCE I HAVE OWNED IT. IT HAS COST ME OVER $500 EACH REPAIR. OTHERS HAVE COMPLAINED ABOUT THIS. THE SECOND TIME IT WENT OUT WAS IN A PARKING LOT WHEN I WAS GOING SLOW AND THE THIRD TIME HAPPENED THIS MORNING WHEN I LEFT FOR WORK. THIS IS RIDICULOUS AND ALL NISSAN WANTS TO DO IS CHARGE OFF THE WALL PRICES. I'M A MASTER MECHANIC AND THE DESIGN OF THIS WHOLE SYSTEM IS RIDICULOUS. *TR.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):JN1BZ34D98M. Nissan 350z 2008 problem was reported in FAYETTEVILLE, NC. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.
Report Your Car Problem Go Top
NISSAN 350Z 2008 Power Train Report #10463424
NISSAN 350Z 2008 car safety problem was reported on Oct 05, 2011.NISSAN 350Z 2008, manufactured by NISSAN NORTH AMERICA, INC. had a problem with POWER TRAIN . TL* THE CONTACT OWNS A 2008 NISSAN 350Z. WHILE DRIVING APPROXIMATELY 30 MPH, THE CLUTCH FAILED TO RESPOND WHEN ENGAGED. THE BRAKE PEDAL WAS APPLIED WITH FORCE AND THE VEHICLE CAME TO A STOP. THE VEHICLE WAS TOWED TO THE RESIDENCE. THE CONTACT INSPECTED THE VEHICLE AND STATED THE SLAVE CYLINDER WOULD NEED TO BE REPLACED. THE VEHICLE HAD NOT BEEN REPAIRED. THE MANUFACTURER WAS NOTIFIED OF THE PROBLEM. THE APPROXIMATE FAILURE MILEAGE WAS 60,000. .0 person(s) were injured. 0 person(s) died.Mileage was 60000 miles. Vehicle Identification Number (VIN):JN1BZ34D98M. Nissan 350z 2008 problem was reported in FAYETTEVILLE, NC. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 30 mph.
Report Your Car Problem Go Top
NISSAN 350Z Air Bags
NISSAN 350Z 2008 Air Bags Report #10465448
NISSAN 350Z 2008 car safety problem was reported on May 15, 2012.NISSAN 350Z 2008, manufactured by NISSAN NORTH AMERICA, INC. had a problem with AIR BAGS . TL* THE CONTACT OWNS A 2008 NISSAN 350Z. THE CONTACT STATED THAT THE AIR BAG LIGHT ILLUMINATED. THE VEHICLE WAS TAKEN TO A DEALER FOR DIAGNOSIS AND THE CONTACT WAS WAITING ON THE RESULTS. THE CONTACT WAS ALSO INFORMED OF A RECALL UNDER NHTSA CAMPAIGN ID NUMBER: 08V521000 (AIR BAGS) AND CONTACTED THE MANUFACTURER, WHO STATED THAT THE VIN WAS NOT INCLUDED. THE VEHICLE HAD NOT BEEN REPAIRED. THE FAILURE AND CURRENT MILEAGES WERE 57,000. .0 person(s) were injured. 0 person(s) died.Mileage was 57000 miles. Vehicle Identification Number (VIN):JN1BZ34EX8M. Nissan 350z 2008 problem was reported in LAS VEGAS, NV. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.
Report Your Car Problem Go Top
NISSAN 350Z Power Train
NISSAN 350Z 2008 Power Train Report #10474582
NISSAN 350Z 2008 car safety problem was reported on Sept 09, 2012.NISSAN 350Z 2008, manufactured by Nissan North America, Inc. had a problem with POWER TRAIN . I WAS DRIVING MY 2008 NISSAN 350Z ON THE FREEWAY AT ABOUT 65 MPH AND WHEN I STEPPED ON THE CLUTCH TO SWITCH GEARS IT WAS STUCK ON THE FLOOR AND DIDN'T COME BACK UP. THE CLUTCH WAS STUCK IN GEAR AND I HAD TO PULL OVER AND GET IT TOWED. *TR.0 person(s) were injured. 0 person(s) died.Mileage was 50000 miles. Vehicle Identification Number (VIN):JN1BZ34D98M. Nissan 350z 2008 problem was reported in SAN DIEGO, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 65 mph.
Report Your Car Problem Go Top
NISSAN 350Z 2008 Power Train Report #10498391
NISSAN 350Z 2008 car safety problem was reported on Feb 16, 2013.NISSAN 350Z 2008, manufactured by Nissan North America, Inc. had a problem with POWER TRAIN . DRIVING, PUSH CLUTCH IN IT STAY ON THE FLOOR, CANNOT SHIFT, DANGEROUS ON THE FREEWAY, SAFETY HAZZARD, THERE ARE NUMEROUS SAME PROBLEM WITH THE 2008 350Z NISSAN NEED TO DO A RECALL BEFORE SOMEONE GET KILL OF THIS PROBLEM. *TR .0 person(s) were injured. 0 person(s) died.Mileage was 27863 miles. Vehicle Identification Number (VIN):JN1BZ34D98M. Nissan 350z 2008 problem was reported in LAS VEGAS, NV. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 65 mph.
Report Your Car Problem Go Top
NISSAN 350Z 2008 Power Train Report #10508418
NISSAN 350Z 2008 car safety problem was reported on Apr 15, 2013.NISSAN 350Z 2008, manufactured by Nissan North America, Inc. had a problem with POWER TRAIN . WHILE DRIVING AT SPEED PRESSED CLUTCH PEDAL AND IT STAYED ON THE FLOOR ACCOMPANIED BY A VERY CHARACTERISTIC AND STRONG BURNING SMELL, UNABLE TO CHANGE GEARS, CAR RENDERED INOPERABLE. SAFETY HAZARD, STUCK IN GEAR AT HIGHWAY SPEEDS. *TR.0 person(s) were injured. 0 person(s) died.Mileage was 36000 miles. Vehicle Identification Number (VIN):JN1BZ34D28M. Nissan 350z 2008 problem was reported in MEMPHIS, TN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 60 mph.
Report Your Car Problem Go Top
NISSAN 350Z 2008 Power Train Report #10508810
NISSAN 350Z 2008 car safety problem was reported on Apr 16, 2013.NISSAN 350Z 2008, manufactured by Nissan North America, Inc. had a problem with POWER TRAIN . CLUTCH STUCK TO FLOOR FROM SLAVE CYLINDER GOING OUT. *TR.0 person(s) were injured. 0 person(s) died.Mileage was 57000 miles. Vehicle Identification Number (VIN):JN1BZ34D08M. Nissan 350z 2008 problem was reported in AUSTIN, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 5 mph.
Report Your Car Problem Go Top
NISSAN 350Z Engine
NISSAN 350Z 2008 Engine Report #10508810
NISSAN 350Z 2008 car safety problem was reported on Apr 16, 2013.NISSAN 350Z 2008, manufactured by Nissan North America, Inc. had a problem with ENGINE . CLUTCH STUCK TO FLOOR FROM SLAVE CYLINDER GOING OUT. *TR.0 person(s) were injured. 0 person(s) died.Mileage was 57000 miles. Vehicle Identification Number (VIN):JN1BZ34D08M. Nissan 350z 2008 problem was reported in AUSTIN, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 5 mph.
Report Your Car Problem Go Top
Nissan 350z 2008 systems
Air Bags 1 Review(s)
Engine 1 Review(s)
Power Train 8 Review(s)
Power Train Automatic Transmission 1 Review(s)
Power Train Clutch Assembly 1 Review(s)
Power Train Clutch Assembly Pedal/linkage 1 Review(s)
Power Train Manual Transmission 10 Review(s)
Share, Email, Print
You might be interested in the following information from our sponsors
Nissan 350z 2008 Reviews
i took my 2005 nissan xterra to a dealership in long beach ca, to have them run a diagnostic test on why my check engine would go off. I drove off having more problems then a had when i took my vehicle into be tested. i paid 1'323.28 for a battery what does it mean when I put my 2004 Nissan Altima in drive and it takes it about 10 or seconds before it will go into drive. The weird thing is I can go into reverse with no problem or lower gear it goes I have a problem with my 2005 Nissan TPMS. After about 10 miles, the reading on the display changes to "**" for 1 of the 4 tires and the low pressure warning light comes on. I've checked pressure on the tires and they are all fine. The dealer t Why my 2008 Nissan maxima flat tire light keep on even we filled air full? i am getting zzon zoon sound from air compressor nissan maxima gxe model1997.what i have to do get its serving or replace the air compressor?please reply. hi would it cause the brakes to lock on if the brake light switch was fitted in the wrong postion on a 4 pin switch nissan tiida?. Crossed jumped my cars battery for 2 sec. Now car will crank but not start 2010 Nissan Frontier Extended Cab and five foot bed vibrates when starting off from a dead stop.....only lasts a second and again only when starting from a dead stop....dealers answer was has an 80,000 mile power train warranty, drive it till it b This is my 2nd quest. I've owned this one over a year. Do the sliding doors not have sensors? My other 05' did. My 1 year old got her fingers caught, thank God it was nothing major, but it could have been. Why would they not have sensors??? This can result in gradual wear over a period of time inside the joint that could lead to the separation of the wiper linkage assembly from the wiper motor linkage at the joint ball. I have a 05 nissan maxima with 35,000 miles. I'm not having a problem at this time. I would like to know if a transgo Kit for the valvebody will help to prevent future problems with the transmission. I have a 01 Niss UD 2600 No Fuel aqt the inj pump but fuel getting to the pump its been very cold and i have changed both filters. i was told there is a crank sensor in the inj. pump where is it?? And How do i check it