Car-and-Safety.com
Plymouth Sundance 1991 Safety Reports and Reviews
Plymouth Sundance Reports
PLYMOUTH SUNDANCE Seats Front Assembly Recliner
PLYMOUTH SUNDANCE 1991 Seats Front Assembly Recliner Report #481006
PLYMOUTH SUNDANCE 1991 car safety problem was reported on Jan 30, 1995.PLYMOUTH SUNDANCE 1991, manufactured by DAIMLERCHRYSLER CORPORATION had a problem with SEATS:FRONT ASSEMBLY:RECLINER . NO LATCH ON FRONT SEATS TO PREVENT SEATS FROM BENDING FORWARD..0 person(s) were injured. 0 person(s) died.Plymouth Sundance 1991 problem was reported in CHULA VIST, CA. Vehicle was not using Cruise Control.
Report Your Car Problem Go Top
PLYMOUTH SUNDANCE Power Train Automatic Transmission Park/neutral Start Switch
PLYMOUTH SUNDANCE 1991 Power Train Automatic Transmission Park/neutral Start Switch Report #964725
PLYMOUTH SUNDANCE 1991 car safety problem was reported on Feb 28, 1991.PLYMOUTH SUNDANCE 1991, manufactured by DAIMLERCHRYSLER CORPORATION had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION:PARK/NEUTRAL START SWITCH . AUTO-TRAN: CAN REMOVE KEYS FROM IGNITION WITHOUT GEAR IN PARK POSITION; CAN SHIFT GEARS WITHOUT IGNITION SWITCH TURNED; ROLLED ONTO STREET; HIT PARKED CAR. TT.Vehicle was involved in a crash. 0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1P3XP28D5MN. Plymouth Sundance 1991 problem was reported in AGUSTA, KS. Vehicle was not using Cruise Control.
Report Your Car Problem Go Top
PLYMOUTH SUNDANCE Seats Front Assembly Recliner
PLYMOUTH SUNDANCE 1991 Seats Front Assembly Recliner Report #966321
PLYMOUTH SUNDANCE 1991 car safety problem was reported on July 10, 1994.PLYMOUTH SUNDANCE 1991, manufactured by DAIMLERCHRYSLER CORPORATION had a problem with SEATS:FRONT ASSEMBLY:RECLINER . DRIVERS SEAT BACK BOLT FAILED WHILE DRIVING, CAUSING SEAT BACK TO FALL BACKWARDS. *AK.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1P3XP64K6MN. Plymouth Sundance 1991 problem was reported in FRANKLIN SQU, NY. Vehicle was not using Cruise Control.
Report Your Car Problem Go Top
PLYMOUTH SUNDANCE Seat Belts Front Webbing
PLYMOUTH SUNDANCE 1991 Seat Belts Front Webbing Report #966492
PLYMOUTH SUNDANCE 1991 car safety problem was reported on June 05, 1995.PLYMOUTH SUNDANCE 1991, manufactured by DAIMLERCHRYSLER CORPORATION had a problem with SEAT BELTS:FRONT:WEBBING . SHOULDER SEAT BELT DID NOT RESTRAIN PASSENGER IN REAR RIGHT SEAT DURING REAR END IMPACT, PASSENGER SUSTAINED HEAD/NECK INJURIES. *AK.Vehicle was involved in a crash. 12 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1P3XP28D7MN. Plymouth Sundance 1991 problem was reported in MINNEAPOLIS, MN. Vehicle was not using Cruise Control.
Report Your Car Problem Go Top
PLYMOUTH SUNDANCE Seats Front Assembly Recliner
PLYMOUTH SUNDANCE 1991 Seats Front Assembly Recliner Report #969191
PLYMOUTH SUNDANCE 1991 car safety problem was reported on .PLYMOUTH SUNDANCE 1991, manufactured by DAIMLERCHRYSLER CORPORATION had a problem with SEATS:FRONT ASSEMBLY:RECLINER . CONSUMER WAS DRIVING AND THE SEAT BACK BOLT BROKEN AND SEAT WHEN BACK. TT.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1P3XP44K5MN. Plymouth Sundance 1991 problem was reported in SKILLMAN, NJ. Vehicle was not using Cruise Control.
Report Your Car Problem Go Top
PLYMOUTH SUNDANCE Power Train Automatic Transmission
PLYMOUTH SUNDANCE 1991 Power Train Automatic Transmission Report #970021
PLYMOUTH SUNDANCE 1991 car safety problem was reported on Aug 08, 1995.PLYMOUTH SUNDANCE 1991, manufactured by DAIMLERCHRYSLER CORPORATION had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . AUTOMATIC TRANSMISSION GEAR SELECTOR WHILE SHIFT GEARS WITHOUT PRESSING THE BUTTON. TT.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1P3XP28D3MN. Plymouth Sundance 1991 problem was reported in MILWAUKEE, WI. Vehicle was not using Cruise Control.
Report Your Car Problem Go Top
PLYMOUTH SUNDANCE Seats Front Assembly Recliner
PLYMOUTH SUNDANCE 1991 Seats Front Assembly Recliner Report #971257
PLYMOUTH SUNDANCE 1991 car safety problem was reported on Apr 15, 1994.PLYMOUTH SUNDANCE 1991, manufactured by DAIMLERCHRYSLER CORPORATION had a problem with SEATS:FRONT ASSEMBLY:RECLINER . DRIVER'S RECLINING SEAT BACK REST DOES NOT STAY UP ON ITS OWN; STABILIZED BY A MILK CART; ALLEGEDLY FIXED TWICE. TT.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1P3XP48K9MN. Plymouth Sundance 1991 problem was reported in BELLE HARBOR, NY. Vehicle was not using Cruise Control.
Report Your Car Problem Go Top
PLYMOUTH SUNDANCE 1991 Seats Report #972097
PLYMOUTH SUNDANCE 1991 car safety problem was reported on .PLYMOUTH SUNDANCE 1991, manufactured by DAIMLERCHRYSLER CORPORATION had a problem with SEATS . THE DRIVER SIDE BUCKET SEAT MOVES WHEN SITTING IN SEAT . TT.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1P3XP28D7MN. Plymouth Sundance 1991 problem was reported in HOLLYWOOD, FL. Vehicle was not using Cruise Control.
Report Your Car Problem Go Top
PLYMOUTH SUNDANCE Air Bags Frontal
PLYMOUTH SUNDANCE 1991 Air Bags Frontal Report #979941
PLYMOUTH SUNDANCE 1991 car safety problem was reported on Jan 23, 1996.PLYMOUTH SUNDANCE 1991, manufactured by DAIMLERCHRYSLER CORPORATION had a problem with AIR BAGS:FRONTAL . BUSINESS AREA HAD BROKEN WATER LINE; ROAD WAS ICY; ANOTHER VEHICLE WAS STOPPED, SLID INTO REAR OF VEHICLE, AIRBAG POPPED OUT, DID NOT INFLATE. *AK.Vehicle was involved in a crash. 0 person(s) were injured. 0 person(s) died.Plymouth Sundance 1991 problem was reported in CHARLESTON, AR. Vehicle was not using Cruise Control.
Report Your Car Problem Go Top
PLYMOUTH SUNDANCE 1991 Air Bags Frontal Report #979941
PLYMOUTH SUNDANCE 1991 car safety problem was reported on Jan 23, 1996.PLYMOUTH SUNDANCE 1991, manufactured by DAIMLERCHRYSLER CORPORATION had a problem with AIR BAGS:FRONTAL . BUSINESS AREA HAD BROKEN WATER LINE; ROAD WAS ICY; ANOTHER VEHICLE WAS STOPPED, SLID INTO REAR OF VEHICLE, AIRBAG POPPED OUT, DID NOT INFLATE. *AK.Vehicle was involved in a crash. 0 person(s) were injured. 0 person(s) died.Plymouth Sundance 1991 problem was reported in CHARLESTON, AR. Vehicle was not using Cruise Control.
Report Your Car Problem Go Top
PLYMOUTH SUNDANCE Engine And Engine Cooling Engine
PLYMOUTH SUNDANCE 1991 Engine And Engine Cooling Engine Report #981240
PLYMOUTH SUNDANCE 1991 car safety problem was reported on Apr 12, 1995.PLYMOUTH SUNDANCE 1991, manufactured by DAIMLERCHRYSLER CORPORATION had a problem with ENGINE AND ENGINE COOLING:ENGINE . THE VEHICLE WAS IN MOTION AND THE MOTOR MOUNTS FELL OFF THE VHEICLE. *AK.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):IP3XP24D5MN. Plymouth Sundance 1991 problem was reported in BLOOMFIELD, NJ. Vehicle was not using Cruise Control.
Report Your Car Problem Go Top
PLYMOUTH SUNDANCE Steering Wheel And Handle Bar
PLYMOUTH SUNDANCE 1991 Steering Wheel And Handle Bar Report #474958
PLYMOUTH SUNDANCE 1991 car safety problem was reported on Apr 25, 1994.PLYMOUTH SUNDANCE 1991, manufactured by DAIMLERCHRYSLER CORPORATION had a problem with STEERING:WHEEL AND HANDLE BAR . STEERING WHEEL LOOSE DUE TO BOLTS HOLDING STEERING WHEEL IN PLACE BEING LOOSE. *DH.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1P3XP28D8MN. Plymouth Sundance 1991 problem was reported in ANGOLA, NY. Vehicle was not using Cruise Control.
Report Your Car Problem Go Top
PLYMOUTH SUNDANCE Structure Body Hatchback/liftgate Support Device
PLYMOUTH SUNDANCE 1991 Structure Body Hatchback/liftgate Support Device Report #803344
PLYMOUTH SUNDANCE 1991 car safety problem was reported on Jan 01, 1992.PLYMOUTH SUNDANCE 1991, manufactured by DAIMLERCHRYSLER CORPORATION had a problem with STRUCTURE:BODY:HATCHBACK/LIFTGATE:SUPPORT DEVICE . WHEN THE WEATHER IS COLD THE LIFTBACK DOES NOT STAY IN OPEN POSITION/NEEDS TO BE PROPPED WITH A STICK OOR BOX. *AK.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):IP3XP44K7MN. Plymouth Sundance 1991 problem was reported in JAMAICA, NY. Original Owner. Vehicle was purchased on 19910301. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Plymouth Sundance 1991 drive type:RWD. FUEL SYSTEM:N/A. Plymouth Sundance 1991 TRANSMISSION TYPE: AUTO.
Report Your Car Problem Go Top
PLYMOUTH SUNDANCE Latches/locks/linkages Trunk Lid Lock
PLYMOUTH SUNDANCE 1991 Latches/locks/linkages Trunk Lid Lock Report #804439
PLYMOUTH SUNDANCE 1991 car safety problem was reported on .PLYMOUTH SUNDANCE 1991, manufactured by DAIMLERCHRYSLER CORPORATION had a problem with LATCHES/LOCKS/LINKAGES:TRUNK LID:LOCK . THE REAR HOOD LATCH FAILED AND DURING HEAVY RAIN THE CAR HAD A WATER LEAK. *AK.Vehicle Identification Number (VIN):1P3XP28D9MN. Plymouth Sundance 1991 problem was reported in BURKE, VA. Original Owner. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.
Report Your Car Problem Go Top
PLYMOUTH SUNDANCE Power Train Axle Assembly
PLYMOUTH SUNDANCE 1991 Power Train Axle Assembly Report #805068
PLYMOUTH SUNDANCE 1991 car safety problem was reported on Sept 01, 1996.PLYMOUTH SUNDANCE 1991, manufactured by DAIMLERCHRYSLER CORPORATION had a problem with POWER TRAIN:AXLE ASSEMBLY . CONSUMER STATES THAT THE REAR AXLE IS CRACKED. *AK CONSUMER STATES THE AXLE WAS CRACKED CAUSING VEHICLE TO FLEX WHEN PLACED UNDER STRAIN DURING NORMAL DRIVING CONDITIONS.*JB.Vehicle Identification Number (VIN):1T3XT2D12MN. Plymouth Sundance 1991 problem was reported in COLLINGDALE, PA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Plymouth Sundance 1991 drive type:FWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Plymouth Sundance 1991 TRANSMISSION TYPE: AUTO.
Report Your Car Problem Go Top
PLYMOUTH SUNDANCE Engine And Engine Cooling Exhaust System Manifold/header/muffler/tail Pipe
PLYMOUTH SUNDANCE 1991 car safety problem was reported on .PLYMOUTH SUNDANCE 1991, manufactured by DAIMLERCHRYSLER CORPORATION had a problem with ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE . RECALL WORK WAS PERFORMED, VEHICLE WAS RETURNED TO CUSTOMER WITH MORE PROBLEMS THAN BEFORE, DEALER DOES NOT ACCEPT RESPONSIBILITY. *AK.Plymouth Sundance 1991 problem was reported in NEW HIDE PARK, NY. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.
Report Your Car Problem Go Top
PLYMOUTH SUNDANCE Structure Body Hatchback/liftgate Support Device
PLYMOUTH SUNDANCE 1991 Structure Body Hatchback/liftgate Support Device Report #514980
PLYMOUTH SUNDANCE 1991 car safety problem was reported on .PLYMOUTH SUNDANCE 1991, manufactured by DAIMLERCHRYSLER CORPORATION had a problem with STRUCTURE:BODY:HATCHBACK/LIFTGATE:SUPPORT DEVICE . REAR HATCHBACK LIFT GATE FALLS DOWN DUE TO SUPPORT RODS..0 person(s) died.Vehicle Identification Number (VIN):1P3XP44DXMN. Plymouth Sundance 1991 problem was reported in BROOKLYN, NY. Original Owner. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Plymouth Sundance 1991 drive type:FWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Plymouth Sundance 1991 TRANSMISSION TYPE: AUTO.
Report Your Car Problem Go Top
PLYMOUTH SUNDANCE Seats Front Assembly Recliner
PLYMOUTH SUNDANCE 1991 Seats Front Assembly Recliner Report #810011
PLYMOUTH SUNDANCE 1991 car safety problem was reported on Mar 04, 1997.PLYMOUTH SUNDANCE 1991, manufactured by DAIMLERCHRYSLER CORPORATION had a problem with SEATS:FRONT ASSEMBLY:RECLINER . WHILE DRIVING ABOUT 15 MPH THE DRIVER'S SIDE SEAT BACK COLLASPED BACKWARDS. THE BOLTS COMPLETELY SHEARED OFF. VEHICLE WAS LEFT AT DEALERSHIP. *AK.Vehicle Identification Number (VIN):1P3XP24D2MN. Plymouth Sundance 1991 problem was reported in SPOTTSYLVANIA, VA. Original Owner. Vehicle was purchased on 19910501. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Plymouth Sundance 1991 TRANSMISSION TYPE: MAN .
Report Your Car Problem Go Top
PLYMOUTH SUNDANCE Suspension Front Stabilizer Bar
PLYMOUTH SUNDANCE 1991 Suspension Front Stabilizer Bar Report #813933
PLYMOUTH SUNDANCE 1991 car safety problem was reported on June 18, 1997.PLYMOUTH SUNDANCE 1991, manufactured by DAIMLERCHRYSLER CORPORATION had a problem with SUSPENSION:FRONT:STABILIZER BAR . THE SUSPENSION BAR THAT RUNS FROM RIGHT TO LEFT BRAKE CRACKED, CAUSING GRINDING. OWNER HAS DIFFICULTY CONTACTING MANUFACTURER. *AK.Vehicle Identification Number (VIN):1P3XP44D4MN. Plymouth Sundance 1991 problem was reported in NAPPA, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.
Report Your Car Problem Go Top
PLYMOUTH SUNDANCE Seats
PLYMOUTH SUNDANCE 1991 Seats Report #818319
PLYMOUTH SUNDANCE 1991 car safety problem was reported on Nov 03, 1997.PLYMOUTH SUNDANCE 1991, manufactured by DAIMLERCHRYSLER CORPORATION had a problem with SEATS . DEALERSHIP HAD TO ORDER NEW SEAT BECAUSE BEFORE RECALL NOTICE BOLT HAD ALREADY BROKEN. THIS WAS IN AUG OF 1997. CONSUMER HAS CONTACTED DEALERSHIP ABOUT ONCE A WEEK, STILL HAS NOT PROVIDED SEAT. *AK.Vehicle Identification Number (VIN):1P3XP24DXMN. Plymouth Sundance 1991 problem was reported in LUDINGTON, MI. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.
Report Your Car Problem Go Top
PLYMOUTH SUNDANCE Latches/locks/linkages Trunk Lid Lock
PLYMOUTH SUNDANCE 1991 Latches/locks/linkages Trunk Lid Lock Report #821116
PLYMOUTH SUNDANCE 1991 car safety problem was reported on .PLYMOUTH SUNDANCE 1991, manufactured by DAIMLERCHRYSLER CORPORATION had a problem with LATCHES/LOCKS/LINKAGES:TRUNK LID:LOCK . THE LIFTGATE SUPPORT THAT HOLDS UP THE TRUNK RELEASED, CAUSING TRUNK TO FALL ON CONSUMER BACK. *AK .Vehicle Identification Number (VIN):1P3XT2805MN. Plymouth Sundance 1991 problem was reported in PILOT MOUNTAIN, NC. Original Owner. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Plymouth Sundance 1991 drive type:FWD. FUEL SYSTEM:N/A. Plymouth Sundance 1991 TRANSMISSION TYPE: AUTO.
Report Your Car Problem Go Top
PLYMOUTH SUNDANCE Power Train Axle Assembly
PLYMOUTH SUNDANCE 1991 Power Train Axle Assembly Report #821967
PLYMOUTH SUNDANCE 1991 car safety problem was reported on Nov 01, 1997.PLYMOUTH SUNDANCE 1991, manufactured by DAIMLERCHRYSLER CORPORATION had a problem with POWER TRAIN:AXLE ASSEMBLY . WHILE DRIVING AT LOW RATE OF SPEED (35-40MPH), CAN HEAR CLANGING NOISE NEAR AXLE AREA. TOOK TO MECHANIC & WAS INFORMED PLATE BEHIND AXLE WAS CRACKED & DRIVER WOULD HAVE LOST CONTROL OF VEHICLE. *AK .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1P3XP48KXMN. Plymouth Sundance 1991 problem was reported in SUISUN CITY, CA. Original Owner. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. FUEL SYSTEM:N/A. Plymouth Sundance 1991 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 40 mph.
Report Your Car Problem Go Top
PLYMOUTH SUNDANCE Suspension Front Springs Torsion Bar
PLYMOUTH SUNDANCE 1991 Suspension Front Springs Torsion Bar Report #542345
PLYMOUTH SUNDANCE 1991 car safety problem was reported on Feb 01, 1998.PLYMOUTH SUNDANCE 1991, manufactured by DAIMLERCHRYSLER CORPORATION had a problem with SUSPENSION:FRONT:SPRINGS:TORSION BAR . TORSION BAR WELDING BROKE IN REAR AXLE CAUSING NOISE AND BAD PERFORMANCE. QCAW.0 person(s) were injured. 0 person(s) died.Plymouth Sundance 1991 problem was reported in SANTA ROSA, CA. Original Owner. Vehicle was purchased on 19910101. Vehicle was using Cruise Control.Plymouth Sundance 1991 drive type:FWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Plymouth Sundance 1991 TRANSMISSION TYPE: AUTO.
Report Your Car Problem Go Top
PLYMOUTH SUNDANCE Fuel System, Gasoline Delivery Fuel Pump
PLYMOUTH SUNDANCE 1991 Fuel System, Gasoline Delivery Fuel Pump Report #604350
PLYMOUTH SUNDANCE 1991 car safety problem was reported on .PLYMOUTH SUNDANCE 1991, manufactured by DAIMLERCHRYSLER CORPORATION had a problem with FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP . FUEL PUMP FAILED..Vehicle Identification Number (VIN):1P3XG4K8MN5. Plymouth Sundance 1991 problem was reported in BROOKLYN, NY. Original Owner. Vehicle was purchased on 19901101. Vehicle was using Cruise Control.Plymouth Sundance 1991 drive type:FWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Plymouth Sundance 1991 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 60 mph.
Report Your Car Problem Go Top
PLYMOUTH SUNDANCE Structure Body Hatchback/liftgate Support Device
PLYMOUTH SUNDANCE 1991 Structure Body Hatchback/liftgate Support Device Report #546038
PLYMOUTH SUNDANCE 1991 car safety problem was reported on Dec 21, 1997.PLYMOUTH SUNDANCE 1991, manufactured by DAIMLERCHRYSLER CORPORATION had a problem with STRUCTURE:BODY:HATCHBACK/LIFTGATE:SUPPORT DEVICE . HATCHBACK STRUT RODS FAILED CAUSING INJURY TO CONSUMER'S SPINAL COLUMN. MJS.1 person(s) were injured. Vehicle Identification Number (VIN):1P3XP28D5MN. Plymouth Sundance 1991 problem was reported in PILOT MOUN, NC. Original Owner. Vehicle was purchased on 19911201. Vehicle was not using Cruise Control. Plymouth Sundance 1991 drive type:FWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Plymouth Sundance 1991 TRANSMISSION TYPE: AUTO.
Report Your Car Problem Go Top
PLYMOUTH SUNDANCE Engine And Engine Cooling Engine Gasoline
PLYMOUTH SUNDANCE 1991 Engine And Engine Cooling Engine Gasoline Report #840393
PLYMOUTH SUNDANCE 1991 car safety problem was reported on June 01, 1999.PLYMOUTH SUNDANCE 1991, manufactured by DAIMLERCHRYSLER CORPORATION had a problem with ENGINE AND ENGINE COOLING:ENGINE:GASOLINE . VEHICLE EXPERIENCED SUDDEN ACELERATION WHILE BACK BACKING OUT OF A PARKING (VEHICLE DOES NOT HAVE CRUISE CONTROL) CAUSING VEHICLE TO HIT BETWEEN ANOTHER VEHICLE AND A TREE. DEALER/MFR. WAS NOT NOTIFIED AT THIS TIME..Vehicle Identification Number (VIN):PLEASE FILL. Plymouth Sundance 1991 problem was reported in HOPKINS, MN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.
Report Your Car Problem Go Top
PLYMOUTH SUNDANCE 1991 Engine And Engine Cooling Engine Gasoline Report #710984
PLYMOUTH SUNDANCE 1991 car safety problem was reported on .PLYMOUTH SUNDANCE 1991, manufactured by DAIMLERCHRYSLER CORPORATION had a problem with ENGINE AND ENGINE COOLING:ENGINE:GASOLINE . STALLS DAILY - HAVE REPLACED HOSES, BATTERY, FILTERS, ETC..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1P3XP28D1MN. Plymouth Sundance 1991 problem was reported in BRIDGEWATER, CT. Original Owner. Vehicle was purchased on 19910501. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Plymouth Sundance 1991 drive type:FWD. FUEL TYPE: GAS.
Report Your Car Problem Go Top
PLYMOUTH SUNDANCE Structure Body Hatchback/liftgate Support Device
PLYMOUTH SUNDANCE 1991 Structure Body Hatchback/liftgate Support Device Report #548244
PLYMOUTH SUNDANCE 1991 car safety problem was reported on Dec 21, 1997.PLYMOUTH SUNDANCE 1991, manufactured by DAIMLERCHRYSLER CORPORATION had a problem with STRUCTURE:BODY:HATCHBACK/LIFTGATE:SUPPORT DEVICE . HATCHBACK STRUTS FAIL TO KEEP LID UP, FALLS EVERYTIME ITS OPENED CAUSING SERVERE BACK INJURY TO OWNER. *YC.1 person(s) were injured. Vehicle Identification Number (VIN):1P3XP28D5MN. Plymouth Sundance 1991 problem was reported in PILOT MOUN, NC. Original Owner. Vehicle was purchased on 19971201. Vehicle was not using Cruise Control. Plymouth Sundance 1991 drive type:FWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Plymouth Sundance 1991 TRANSMISSION TYPE: AUTO.
Report Your Car Problem Go Top
PLYMOUTH SUNDANCE Equipment Electrical Air Conditioner
PLYMOUTH SUNDANCE 1991 Equipment Electrical Air Conditioner Report #714408
PLYMOUTH SUNDANCE 1991 car safety problem was reported on June 01, 1998.PLYMOUTH SUNDANCE 1991, manufactured by DAIMLERCHRYSLER CORPORATION had a problem with EQUIPMENT:ELECTRICAL:AIR CONDITIONER . IF YOU CAN'T HELP ME WITH THE PAINT, PLEASE LET ME KNOW WHO CAN. WAS THERE ANY RECALL ON PAINTING FOR PLYMOUTHS? I SEE MANY SUNDANCES ON THE ROAD WITH THE SAME PROBLEM PEELING AS MINE. ALSO, SOME SPOTS WHERE PEELING OCCURRED, IS NOW RUSTING. AS FOR THE HOOD, REPLACEMENT SHOCKS I PURCHASED HELPED HOLD TRUNK UP AGAIN..Vehicle Identification Number (VIN):1P3XP28D5MN. Plymouth Sundance 1991 problem was reported in STATEN ISLAND, NY. Vehicle was purchased on 19940501. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Plymouth Sundance 1991 drive type:FWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS.
Report Your Car Problem Go Top
PLYMOUTH SUNDANCE Structure Body Trunk Lid
PLYMOUTH SUNDANCE 1991 Structure Body Trunk Lid Report #714408
PLYMOUTH SUNDANCE 1991 car safety problem was reported on June 01, 1998.PLYMOUTH SUNDANCE 1991, manufactured by DAIMLERCHRYSLER CORPORATION had a problem with STRUCTURE:BODY:TRUNK LID . IF YOU CAN'T HELP ME WITH THE PAINT, PLEASE LET ME KNOW WHO CAN. WAS THERE ANY RECALL ON PAINTING FOR PLYMOUTHS? I SEE MANY SUNDANCES ON THE ROAD WITH THE SAME PROBLEM PEELING AS MINE. ALSO, SOME SPOTS WHERE PEELING OCCURRED, IS NOW RUSTING. AS FOR THE HOOD, REPLACEMENT SHOCKS I PURCHASED HELPED HOLD TRUNK UP AGAIN..Vehicle Identification Number (VIN):1P3XP28D5MN. Plymouth Sundance 1991 problem was reported in STATEN ISLAND, NY. Vehicle was purchased on 19940501. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Plymouth Sundance 1991 drive type:FWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS.
Report Your Car Problem Go Top
PLYMOUTH SUNDANCE Visibility Windshield
PLYMOUTH SUNDANCE 1991 Visibility Windshield Report #864324
PLYMOUTH SUNDANCE 1991 car safety problem was reported on .PLYMOUTH SUNDANCE 1991, manufactured by DAIMLERCHRYSLER CORPORATION had a problem with VISIBILITY:WINDSHIELD . PEELING PAINT IS CAUSING ADHESIVE AROUND THE WINDSHIELD TO COME LOOSE. OWNER IS CONCERNED BECAUSE THIS COULD CAUSE WINDSHIELD TO COLLAPSE. MANUFACTURER HAS BEEN NOTIFIED ABOUT THE PROBLEM. PROBLEM HAS NOT BEEN CORRECTED. PLEASE PROVIDE ANY FURTHER NFORMATION. *AK.Vehicle Identification Number (VIN):1P3XP24DXMN. Plymouth Sundance 1991 problem was reported in WEST SENECA, NY. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.
Report Your Car Problem Go Top
PLYMOUTH SUNDANCE Power Train
PLYMOUTH SUNDANCE 1991 Power Train Report #728860
PLYMOUTH SUNDANCE 1991 car safety problem was reported on May 17, 2000.PLYMOUTH SUNDANCE 1991, manufactured by DAIMLERCHRYSLER CORPORATION had a problem with POWER TRAIN . SPEEDOMETER ON OTHER PEOPLE'S SAME MODEL CAR HAD SAME PROBLEM.Vehicle Identification Number (VIN):1P3XP24DOMN. Plymouth Sundance 1991 problem was reported in MIAMI, FL. Vehicle was purchased on 20000501. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Plymouth Sundance 1991 drive type:FWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph.
Report Your Car Problem Go Top
PLYMOUTH SUNDANCE Engine And Engine Cooling Engine Gasoline Belts And Associated Pulleys
PLYMOUTH SUNDANCE 1991 car safety problem was reported on Jan 01, 2000.PLYMOUTH SUNDANCE 1991, manufactured by DAIMLERCHRYSLER CORPORATION had a problem with ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:BELTS AND ASSOCIATED PULLEYS . SERPENTINE BELT ASSOCIATED WITH ALTERNATOR SLIPS FROM PULLEY ASSEMBLY WHEN IN CONTACT WITH WATER IS MADE. DEALERSHIP HAS EXAMINED VEHICLE, AND REPLACED BELT. CONSUMER CONCERNED THAT WHEN BELT SLIPS FROM ASSEMBLY, LOSS OF POWER WOULD OCCUR, AND VEHICLE COULD BE DIFFICULT TO MANAGE. PLEASE PROVIDE ANY ADDITIONAL INFORMATION/ATTACHMENTS. *AK.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1P3XP24D2MN. Plymouth Sundance 1991 problem was reported in POMONA PARK, FL. Original Owner. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.
Report Your Car Problem Go Top
Plymouth Sundance 1991 systems
Air Bags Frontal 2 Review(s)
Engine And Engine Cooling Engine 1 Review(s)
Engine And Engine Cooling Engine Gasoline 2 Review(s)
Engine And Engine Cooling Engine Gasoline Belts And Associated Pulleys 1 Review(s)
Engine And Engine Cooling Exhaust System Manifold/header/muffler/tail Pipe 1 Review(s)
Equipment Electrical Air Conditioner 1 Review(s)
Fuel System, Gasoline Delivery Fuel Pump 1 Review(s)
Latches/locks/linkages Trunk Lid Lock 2 Review(s)
Power Train 1 Review(s)
Power Train Automatic Transmission 1 Review(s)
Power Train Automatic Transmission Park/neutral Start Switch 1 Review(s)
Power Train Axle Assembly 2 Review(s)
Seat Belts Front Webbing 1 Review(s)
Seats 2 Review(s)
Seats Front Assembly Recliner 5 Review(s)
Steering Wheel And Handle Bar 1 Review(s)
Structure Body Hatchback/liftgate Support Device 4 Review(s)
Structure Body Trunk Lid 1 Review(s)
Suspension Front Springs Torsion Bar 1 Review(s)
Suspension Front Stabilizer Bar 1 Review(s)
Visibility Windshield 1 Review(s)
Share, Email, Print
You might be interested in the following information from our sponsors
Plymouth Sundance 1991 Reviews
how do i fix the water pump with out taking everything apart I have a 1991 Plymouth Grand Voyager. Recently I've noticed that the steering wheel sometimes shakes while I'm driving....not severe, but it's very disconcerting. Also, I am hearing noise from the front passenger side. I checked the tire pressu 1999 plymouht voyager 3.3 at remplace the rack and pinnion and front strut and noise coking comming over time what does it mean when the car still turns on but wont move in any gear and also rolls in park? where is the speed sensor on a plymouth aclame where on the 1998 plymouth voyager se would i find the rear defrost wiring. transmission is controlled by electric servos, not line pressure. Servo package may be bad (silver box on trans case) or your fluid is low, or your transmission filter is clogged. Filter and fluid are under 20 bucks. Servo pack is much more. You cannot bleed brakes through an ABS system. You have to get it professionally done with the proper tools. The spark is controlled by 2 sensors, crank and camshaft. Either not working will cause a no spark situation. The camshaft sensor is the main sensor, but if the crank sensor doesnt "see" crankshaft rotation, it assumes the car has been turned off You dont. The pump is under the pulley cover on both 4 and 6 motors, and the cover is around the motor mount. You also need to remove the crank hub to get the cover off, and that involves a crankshaft pulley puller, removing the inner fenderwell o While driving my 1999 plymouth breeze the car went into low gear and the speedmetor stop working 95 grand voyager in limp mode...replaced input and output speed sensors, correct fluid, still in limp mode. Please help!!