Car-and-Safety.com

Dodge Viper 2000 Visibility Windshield

Dodge Viper 2000 Visibility Windshield Review #726231

DODGE VIPER 2000 car safety problem was reported on July 19, 2000.DODGE VIPER 2000, manufactured by CHRYSLER GROUP LLC had a problem with VISIBILITY:WINDSHIELD . the windshield was only installed with a bead of urethane at the bottom and three (3) one inch strips at the top. no urethane at all on both sides. the windshield was loose and not meeting fmvss 212 and may be fmvss 216.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1B3ER69E3YV. Dodge Viper 2000 problem was reported in SALINAS, CA. Original Owner. Vehicle was purchased on July 01, 2000. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Dodge Viper 2000 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. VEHICLE SPEED: 60 mph.

Dodge Viper 2000 Structure Body Roof And Pillars

Dodge Viper 2000 Structure Body Roof And Pillars Review #8014153

DODGE VIPER 2000 car safety problem was reported on Dec 28, 2001.DODGE VIPER 2000, manufactured by CHRYSLER GROUP LLC had a problem with STRUCTURE:BODY:ROOF AND PILLARS . convertible top would unlatch itself while driving. dealer and manufacturer has been notified. feel free to provide any further information.*ak.Vehicle Identification Number (VIN):1B3ER65E5YV. Dodge Viper 2000 problem was reported in BAKERFIELD, CA. Vehicle was not using Cruise Control.

Dodge Viper 2000 Service Brakes, Hydraulic

Dodge Viper 2000 Service Brakes, Hydraulic Review #8024002

DODGE VIPER 2000 car safety problem was reported on June 01, 2002.DODGE VIPER 2000, manufactured by CHRYSLER GROUP LLC had a problem with SERVICE BRAKES, HYDRAULIC . when braking there is a grinding in right front area of vehicle and goes to the right. took to dealer and dealer can't duplicate problem. please provide any further information. ph.Vehicle Identification Number (VIN):1B3BR69E0YV. Dodge Viper 2000 problem was reported in FAIROAKS, CA. Vehicle was not using Cruise Control.

Dodge Viper 2000 Structure

Dodge Viper 2000 Structure Review #10071383

DODGE VIPER 2000 car safety problem was reported on May 15, 2000.DODGE VIPER 2000, manufactured by CHRYSLER GROUP LLC had a problem with STRUCTURE . copy of request sent to iso international; i have some serious safety issues including the construction of the frame supporting a dodge viper. i have contacted the registrar ul laboratories, including today, on 2 occasions regarding this product. the first request for information was ignored. the federal government offices of the department of transport tell me we live in a self regulating country and are unwilling to investigate this issue. the dealer informs me the manufacturer contends this is not a problem. the manufacturer says they are happy to repair any warranty issues however they can see no issue. what i have observed is visually the welding on the frame at hand does not comply with internationally accepted welding standards. x-ray testing of the frame reveals 7 of the 11 welds tested have gross perosity meaning the welds are not done properly the frame supports the lower control arms which hold the wheels on the car. as well as the motor mounts which support a 10 cylinder engine. the doors do not operate properly when parked on an incline and a hardtop roof weighing close to 100 pounds flew off the car on the highway, a couple of days after it was installed by the dealer. i have a legitimate reason for concern. how am i, within your system, able to have an investigation completed when the registrar who was also responsible for the initial testing won't even respond to my inquiries? i don't believe a company receiving millions of dollars each year from a manufacturer for testing its products, can be responsible for an unbiased opinion, with obvious reasons to be biased. i also reiterate how can a company who is disjointed from the end users by a dealer network, a network that has no reason to conform to iso standards, claim to be iso compliant. i simply want to know what procedures are in place at chrysler for conflict resolution. why is it so difficult to obtain information pertaining to their products..Mileage was 23400 miles. Vehicle Identification Number (VIN):1B3ER65E1YV. Dodge Viper 2000 problem was reported in BRAMPTON, UN. Vehicle was not using Cruise Control. Dodge Viper 2000 TRANSMISSION TYPE: MAN .

Dodge Viper 2000 Suspension

Dodge Viper 2000 Suspension Review #10071383

DODGE VIPER 2000 car safety problem was reported on May 15, 2000.DODGE VIPER 2000, manufactured by CHRYSLER GROUP LLC had a problem with SUSPENSION . copy of request sent to iso international; i have some serious safety issues including the construction of the frame supporting a dodge viper. i have contacted the registrar ul laboratories, including today, on 2 occasions regarding this product. the first request for information was ignored. the federal government offices of the department of transport tell me we live in a self regulating country and are unwilling to investigate this issue. the dealer informs me the manufacturer contends this is not a problem. the manufacturer says they are happy to repair any warranty issues however they can see no issue. what i have observed is visually the welding on the frame at hand does not comply with internationally accepted welding standards. x-ray testing of the frame reveals 7 of the 11 welds tested have gross perosity meaning the welds are not done properly the frame supports the lower control arms which hold the wheels on the car. as well as the motor mounts which support a 10 cylinder engine. the doors do not operate properly when parked on an incline and a hardtop roof weighing close to 100 pounds flew off the car on the highway, a couple of days after it was installed by the dealer. i have a legitimate reason for concern. how am i, within your system, able to have an investigation completed when the registrar who was also responsible for the initial testing won't even respond to my inquiries? i don't believe a company receiving millions of dollars each year from a manufacturer for testing its products, can be responsible for an unbiased opinion, with obvious reasons to be biased. i also reiterate how can a company who is disjointed from the end users by a dealer network, a network that has no reason to conform to iso standards, claim to be iso compliant. i simply want to know what procedures are in place at chrysler for conflict resolution. why is it so difficult to obtain information pertaining to their products..Mileage was 23400 miles. Vehicle Identification Number (VIN):1B3ER65E1YV. Dodge Viper 2000 problem was reported in BRAMPTON, UN. Vehicle was not using Cruise Control. Dodge Viper 2000 TRANSMISSION TYPE: MAN .

Dodge Viper 2000 Visibility Power Window Devices And Controls

Dodge Viper 2000 Visibility Power Window Devices And Controls Review #10071383

DODGE VIPER 2000 car safety problem was reported on May 15, 2000.DODGE VIPER 2000, manufactured by CHRYSLER GROUP LLC had a problem with VISIBILITY:POWER WINDOW DEVICES AND CONTROLS . copy of request sent to iso international; i have some serious safety issues including the construction of the frame supporting a dodge viper. i have contacted the registrar ul laboratories, including today, on 2 occasions regarding this product. the first request for information was ignored. the federal government offices of the department of transport tell me we live in a self regulating country and are unwilling to investigate this issue. the dealer informs me the manufacturer contends this is not a problem. the manufacturer says they are happy to repair any warranty issues however they can see no issue. what i have observed is visually the welding on the frame at hand does not comply with internationally accepted welding standards. x-ray testing of the frame reveals 7 of the 11 welds tested have gross perosity meaning the welds are not done properly the frame supports the lower control arms which hold the wheels on the car. as well as the motor mounts which support a 10 cylinder engine. the doors do not operate properly when parked on an incline and a hardtop roof weighing close to 100 pounds flew off the car on the highway, a couple of days after it was installed by the dealer. i have a legitimate reason for concern. how am i, within your system, able to have an investigation completed when the registrar who was also responsible for the initial testing won't even respond to my inquiries? i don't believe a company receiving millions of dollars each year from a manufacturer for testing its products, can be responsible for an unbiased opinion, with obvious reasons to be biased. i also reiterate how can a company who is disjointed from the end users by a dealer network, a network that has no reason to conform to iso standards, claim to be iso compliant. i simply want to know what procedures are in place at chrysler for conflict resolution. why is it so difficult to obtain information pertaining to their products..Mileage was 23400 miles. Vehicle Identification Number (VIN):1B3ER65E1YV. Dodge Viper 2000 problem was reported in BRAMPTON, UN. Vehicle was not using Cruise Control. Dodge Viper 2000 TRANSMISSION TYPE: MAN .

Dodge Viper 2000 Seat Belts

Dodge Viper 2000 Seat Belts Review #10071383

DODGE VIPER 2000 car safety problem was reported on May 15, 2000.DODGE VIPER 2000, manufactured by CHRYSLER GROUP LLC had a problem with SEAT BELTS . copy of request sent to iso international; i have some serious safety issues including the construction of the frame supporting a dodge viper. i have contacted the registrar ul laboratories, including today, on 2 occasions regarding this product. the first request for information was ignored. the federal government offices of the department of transport tell me we live in a self regulating country and are unwilling to investigate this issue. the dealer informs me the manufacturer contends this is not a problem. the manufacturer says they are happy to repair any warranty issues however they can see no issue. what i have observed is visually the welding on the frame at hand does not comply with internationally accepted welding standards. x-ray testing of the frame reveals 7 of the 11 welds tested have gross perosity meaning the welds are not done properly the frame supports the lower control arms which hold the wheels on the car. as well as the motor mounts which support a 10 cylinder engine. the doors do not operate properly when parked on an incline and a hardtop roof weighing close to 100 pounds flew off the car on the highway, a couple of days after it was installed by the dealer. i have a legitimate reason for concern. how am i, within your system, able to have an investigation completed when the registrar who was also responsible for the initial testing won't even respond to my inquiries? i don't believe a company receiving millions of dollars each year from a manufacturer for testing its products, can be responsible for an unbiased opinion, with obvious reasons to be biased. i also reiterate how can a company who is disjointed from the end users by a dealer network, a network that has no reason to conform to iso standards, claim to be iso compliant. i simply want to know what procedures are in place at chrysler for conflict resolution. why is it so difficult to obtain information pertaining to their products..Mileage was 23400 miles. Vehicle Identification Number (VIN):1B3ER65E1YV. Dodge Viper 2000 problem was reported in BRAMPTON, UN. Vehicle was not using Cruise Control. Dodge Viper 2000 TRANSMISSION TYPE: MAN .

Dodge Viper 2000 Engine And Engine Cooling

Dodge Viper 2000 Engine And Engine Cooling Review #10071383

DODGE VIPER 2000 car safety problem was reported on May 15, 2000.DODGE VIPER 2000, manufactured by CHRYSLER GROUP LLC had a problem with ENGINE AND ENGINE COOLING . copy of request sent to iso international; i have some serious safety issues including the construction of the frame supporting a dodge viper. i have contacted the registrar ul laboratories, including today, on 2 occasions regarding this product. the first request for information was ignored. the federal government offices of the department of transport tell me we live in a self regulating country and are unwilling to investigate this issue. the dealer informs me the manufacturer contends this is not a problem. the manufacturer says they are happy to repair any warranty issues however they can see no issue. what i have observed is visually the welding on the frame at hand does not comply with internationally accepted welding standards. x-ray testing of the frame reveals 7 of the 11 welds tested have gross perosity meaning the welds are not done properly the frame supports the lower control arms which hold the wheels on the car. as well as the motor mounts which support a 10 cylinder engine. the doors do not operate properly when parked on an incline and a hardtop roof weighing close to 100 pounds flew off the car on the highway, a couple of days after it was installed by the dealer. i have a legitimate reason for concern. how am i, within your system, able to have an investigation completed when the registrar who was also responsible for the initial testing won't even respond to my inquiries? i don't believe a company receiving millions of dollars each year from a manufacturer for testing its products, can be responsible for an unbiased opinion, with obvious reasons to be biased. i also reiterate how can a company who is disjointed from the end users by a dealer network, a network that has no reason to conform to iso standards, claim to be iso compliant. i simply want to know what procedures are in place at chrysler for conflict resolution. why is it so difficult to obtain information pertaining to their products..Mileage was 23400 miles. Vehicle Identification Number (VIN):1B3ER65E1YV. Dodge Viper 2000 problem was reported in BRAMPTON, UN. Vehicle was not using Cruise Control. Dodge Viper 2000 TRANSMISSION TYPE: MAN .

Dodge Viper 2000 Unknown Or Other

Dodge Viper 2000 Unknown Or Other Review #10071383

DODGE VIPER 2000 car safety problem was reported on May 15, 2000.DODGE VIPER 2000, manufactured by CHRYSLER GROUP LLC had a problem with UNKNOWN OR OTHER . copy of request sent to iso international; i have some serious safety issues including the construction of the frame supporting a dodge viper. i have contacted the registrar ul laboratories, including today, on 2 occasions regarding this product. the first request for information was ignored. the federal government offices of the department of transport tell me we live in a self regulating country and are unwilling to investigate this issue. the dealer informs me the manufacturer contends this is not a problem. the manufacturer says they are happy to repair any warranty issues however they can see no issue. what i have observed is visually the welding on the frame at hand does not comply with internationally accepted welding standards. x-ray testing of the frame reveals 7 of the 11 welds tested have gross perosity meaning the welds are not done properly the frame supports the lower control arms which hold the wheels on the car. as well as the motor mounts which support a 10 cylinder engine. the doors do not operate properly when parked on an incline and a hardtop roof weighing close to 100 pounds flew off the car on the highway, a couple of days after it was installed by the dealer. i have a legitimate reason for concern. how am i, within your system, able to have an investigation completed when the registrar who was also responsible for the initial testing won't even respond to my inquiries? i don't believe a company receiving millions of dollars each year from a manufacturer for testing its products, can be responsible for an unbiased opinion, with obvious reasons to be biased. i also reiterate how can a company who is disjointed from the end users by a dealer network, a network that has no reason to conform to iso standards, claim to be iso compliant. i simply want to know what procedures are in place at chrysler for conflict resolution. why is it so difficult to obtain information pertaining to their products..Mileage was 23400 miles. Vehicle Identification Number (VIN):1B3ER65E1YV. Dodge Viper 2000 problem was reported in BRAMPTON, UN. Vehicle was not using Cruise Control. Dodge Viper 2000 TRANSMISSION TYPE: MAN .

Engine And Engine Cooling 1 Review(s)

Seat Belts 1 Review(s)

Service Brakes, Hydraulic 1 Review(s)

Structure 1 Review(s)

Structure Body Roof And Pillars 1 Review(s)

Suspension 1 Review(s)

Unknown Or Other 1 Review(s)

Visibility Power Window Devices And Controls 1 Review(s)

Visibility Windshield 1 Review(s)