Car-and-Safety.com

Chrysler Sebring 2010 Exterior Lighting Tail Lights

Chrysler Sebring 2010 Exterior Lighting Tail Lights Review #10336819

CHRYSLER SEBRING 2010 car safety problem was reported on June 05, 2010.CHRYSLER SEBRING 2010, manufactured by CHRYSLER GROUP LLC had a problem with EXTERIOR LIGHTING:TAIL LIGHTS . tl* the contact owns a 2010 chrysler sebring. the contact discovered the tail lights were off and when she engaged the headlight power switch, the tail lights illuminated. the manufacturer advised that the tail lights were designed to illuminate automatically and a possible failure could exist in the vehicle. the vehicle was not repaired or diagnosed for the failure. the vin was not available. the failure and current mileages were 13,483. .Mileage was 13483 miles. Chrysler Sebring 2010 problem was reported in DALLAS, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Chrysler Sebring 2010 Seats

Chrysler Sebring 2010 Seats Review #10356199

CHRYSLER SEBRING 2010 car safety problem was reported on May 05, 2010.CHRYSLER SEBRING 2010, manufactured by CHRYSLER GROUP LLC had a problem with SEATS . i checked the box for sebring, buti have a 2010 pt cruiser. their was no option for pt cruiser. i purchased the car 2/25/2010. it has a defective driver seat. side of seat keeps breaking. numerous patch repairs have been made by the dealership from may to today--9/17/2010. at one time the seat moved forward and my knees were locked against the steering column and the seat would not move back. car has a power seat. most of the patch repairs only lasted for 2- 3 weeks. seat clips, side mounting stand, seat cushion, cover have all been replaced at least twice. clips have been replaced numerous times. dealership says problem is a design flaw, and that they have seen several pt cruisers with the problem. i asked repeatedly for a new driver seat. two weeks ago, i took my complaint to chrysler service and they refused to authorize a new seat. dealership told me that the seat does not come as a single replacement unit, and that all parts would need to be replaced to build me a new seat bottom. the dealership finally agreed today to do this. in calling chrysler on a follow up today, chyrsler informed me that repairs would not be reimbursed to the dealership unless the dealership could justify all the parts were broken. the car is currently under warranty...about 10,500 miles. i have not paid for any repairs, but it is a big inconvenience (and i think a safety hazard). dealership says chrysler needs to make a design modification. i have owned 5 pt cruisers. this is the only one that has been troublesome. i have photos of the breakdown. i am losing patience and trust in the company. i am considering pursuing lemon law rights. *tr.Mileage was 5000 miles. Vehicle Identification Number (VIN):3A4GY5F93AT. Chrysler Sebring 2010 problem was reported in LAFAYETTE, IN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Chrysler Sebring 2010 Tires Pressure Monitoring And Regulating Systems

Chrysler Sebring 2010 Tires Pressure Monitoring And Regulating Systems Review #10393031

CHRYSLER SEBRING 2010 car safety problem was reported on Mar 27, 2011.CHRYSLER SEBRING 2010, manufactured by CHRYSLER GROUP LLC had a problem with TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS . purchased brand new 2010 chrysler sebring on january 24, 2011 from sterling hgts dodge in sterling hgts, mi. ever since i got the car, the idiot tire pressure warning light comes on after driving on the xway about 10 miles and stays on for a few days, then goes off. it comes on when it rains or is real cold outside under 20 degrees and stays on. i check the tire pressures on all 4 tires and there is nothing wrong. i drove it to the dealer, and they said that this is a common occurrence with these sensors. they checked my tire pressures and all were correct. just drive it some more miles and the light will go off was what was said to me. this problem is consistently going on and off every week! something needs to be done by some outside agency to force chrysler to replace all these tire sensors. every week like clockwork, the same thing happens. i am tired of it. i am tired of not getting help from chrysler. *tr.Mileage was 1000 miles. Vehicle Identification Number (VIN):1C3CC5FV3AN. Chrysler Sebring 2010 problem was reported in WARREN, MI. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 35 mph.

Chrysler Sebring 2010 Tires Pressure Monitoring And Regulating Systems Review #10402203

CHRYSLER SEBRING 2010 car safety problem was reported on Dec 28, 2010.CHRYSLER SEBRING 2010, manufactured by CHRYSLER GROUP LLC had a problem with TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS . tl*the contact owns a 2010 chrysler sebring limited. the contact stated the tire pressure monitoring system and the information system were both defective. the tpms did not indicate that the tires had lost pressure. the information system did not alert her to any issues with the vehicle. the vehicle was inspected by a mechanic who could not pinpoint the problem. the vehicle had not been repaired. the current mileage was 36,270. the failure mileage was approximately 26,000..Mileage was 26000 miles. Vehicle Identification Number (VIN):1C3CC5FB9AN. Chrysler Sebring 2010 problem was reported in PFLUGERVILLE, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Chrysler Sebring 2010 Electrical System

Chrysler Sebring 2010 Electrical System Review #10402203

CHRYSLER SEBRING 2010 car safety problem was reported on Dec 28, 2010.CHRYSLER SEBRING 2010, manufactured by CHRYSLER GROUP LLC had a problem with ELECTRICAL SYSTEM . tl*the contact owns a 2010 chrysler sebring limited. the contact stated the tire pressure monitoring system and the information system were both defective. the tpms did not indicate that the tires had lost pressure. the information system did not alert her to any issues with the vehicle. the vehicle was inspected by a mechanic who could not pinpoint the problem. the vehicle had not been repaired. the current mileage was 36,270. the failure mileage was approximately 26,000..Mileage was 26000 miles. Vehicle Identification Number (VIN):1C3CC5FB9AN. Chrysler Sebring 2010 problem was reported in PFLUGERVILLE, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Chrysler Sebring 2010 Service Brakes, Hydraulic Antilock Abs Warning Light

Chrysler Sebring 2010 Service Brakes, Hydraulic Antilock Abs Warning Light Review #10419634

CHRYSLER SEBRING 2010 car safety problem was reported on July 26, 2011.CHRYSLER SEBRING 2010, manufactured by CHRYSLER GROUP LLC had a problem with SERVICE BRAKES, HYDRAULIC:ANTILOCK:ABS WARNING LIGHT . tl* the contact owns a 2010 chrysler sebring. the contact stated that the anti lock braking light would illuminate on the instrument panel after the vehicle was driven for at least 30 minutes. the vehicle was taken to an authorized dealer, where the contact was informed that the master cylinder was full, causing the failure. the dealer also stated that the master cylinder was not sufficient for this vehicle. the contact felt that this was a manufacturers defect because there was no way of knowing if the vehicle would brake properly. the failure mileage was 30,000 and the current mileage was 31,000. updated 9/19/11 *cn updated 10/28/11. *jb.Mileage was 30000 miles. Vehicle Identification Number (VIN):1C3CC5FB1AN. Chrysler Sebring 2010 problem was reported in SEWICKLEY, PA. Vehicle was purchased on Sept 29, 2010. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. DEALER'S NAME: KELLY CARS . DEALER'S TELEPHONE NUMBER: 412-264-4270 . DEALER'S CITY: MOON TOWNSHIP . DEALER'S STATE CODE: PA. DEALER'S ZIPCODE: 15108 .

Chrysler Sebring 2010 Service Brakes, Hydraulic Review #10419634

CHRYSLER SEBRING 2010 car safety problem was reported on July 26, 2011.CHRYSLER SEBRING 2010, manufactured by CHRYSLER GROUP LLC had a problem with SERVICE BRAKES, HYDRAULIC . tl* the contact owns a 2010 chrysler sebring. the contact stated that the anti lock braking light would illuminate on the instrument panel after the vehicle was driven for at least 30 minutes. the vehicle was taken to an authorized dealer, where the contact was informed that the master cylinder was full, causing the failure. the dealer also stated that the master cylinder was not sufficient for this vehicle. the contact felt that this was a manufacturers defect because there was no way of knowing if the vehicle would brake properly. the failure mileage was 30,000 and the current mileage was 31,000. updated 9/19/11 *cn updated 10/28/11. *jb.Mileage was 30000 miles. Vehicle Identification Number (VIN):1C3CC5FB1AN. Chrysler Sebring 2010 problem was reported in SEWICKLEY, PA. Vehicle was purchased on Sept 29, 2010. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. DEALER'S NAME: KELLY CARS . DEALER'S TELEPHONE NUMBER: 412-264-4270 . DEALER'S CITY: MOON TOWNSHIP . DEALER'S STATE CODE: PA. DEALER'S ZIPCODE: 15108 .

Chrysler Sebring 2010 Engine And Engine Cooling Exhaust System

Chrysler Sebring 2010 Engine And Engine Cooling Exhaust System Review #10422962

CHRYSLER SEBRING 2010 car safety problem was reported on July 16, 2011.CHRYSLER SEBRING 2010, manufactured by CHRYSLER GROUP LLC had a problem with ENGINE AND ENGINE COOLING:EXHAUST SYSTEM . on 16jul2011 i tried to turn on my air condition in my vehicle but all it did was blow hot air. i took the vehicle to chrysler greenbrier in chesapeake va where the vehicle was purchased. before they inspected the vehicle one of the sales person told "we'll im going to tell you now i we find that your air compressor was damaged we can fix it but it will not be covered on your warranty because we are not responsible for natural damage". after they inspected my vehicle he responded "i have bad news your compressor has a hole, maybe a rock hit it" and the price to fix it would be 1,500. i explained to him i did not have any accidents, did not hit anything at all. i have contacted the better business bureau. they stated chrysler responded they are not responsible. i am so upset i just purchased this vehicle last year september and have been without air condition since july of this year. *tr.Chrysler Sebring 2010 problem was reported in NORFOLK, VA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Chrysler Sebring 2010 Electrical System

Chrysler Sebring 2010 Electrical System Review #10424084

CHRYSLER SEBRING 2010 car safety problem was reported on Aug 18, 2011.CHRYSLER SEBRING 2010, manufactured by CHRYSLER GROUP LLC had a problem with ELECTRICAL SYSTEM . well i have been at chysler concerning my brakes, smell of smoke and my engine keep coming on and each time poor customer service. they will not tell me what exactly is going on and i am very upset with the poor customer service. this is taking time from my work and cost consuming. my car has 11,051 miles and that is ridiculous that i go back and forth. i am very upset of the poor service and feel they are not putting the proper parts in my car. my break still squeak and i brought extra warranty for this car. the poor service and deciet is terrible. i am going to the media with this issue. nothing has not change and i called customer service at the chysler corporate office and they treated me with total disrespect. *tr.Mileage was 0 miles. Vehicle Identification Number (VIN):1C3BC4EB8AN. Chrysler Sebring 2010 problem was reported in SILVER SPRING, MD. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph.

Chrysler Sebring 2010 Suspension

Chrysler Sebring 2010 Suspension Review #10424448

CHRYSLER SEBRING 2010 car safety problem was reported on Apr 01, 2011.CHRYSLER SEBRING 2010, manufactured by CHRYSLER GROUP LLC had a problem with SUSPENSION . tl* the contact owns a 2010 chrysler sebring. the contact started the ignition and a loud rattling noise emitted from the front passenger side of the vehicle. the failure recurred whenever the engine was in operation. the vehicle was taken to an authorized dealer who was unable to determine the cause of failure or pinpoint where the noise was coming from. the manufacturer was notified and the engineer was unable to provide a resolution. the approximate failure mileage was 4,888 updated 04/10/12.Mileage was 4888 miles. Vehicle Identification Number (VIN):1C3CC4FB4AN. Chrysler Sebring 2010 problem was reported in WESTBURY, NY. Original Owner. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. Chrysler Sebring 2010 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. DEALER'S NAME: WESTBURY JEEP . DEALER'S TELEPHONE NUMBER: 516-997-3900 .

Chrysler Sebring 2010 Engine And Engine Cooling

Chrysler Sebring 2010 Engine And Engine Cooling Review #10424448

CHRYSLER SEBRING 2010 car safety problem was reported on Apr 01, 2011.CHRYSLER SEBRING 2010, manufactured by CHRYSLER GROUP LLC had a problem with ENGINE AND ENGINE COOLING . tl* the contact owns a 2010 chrysler sebring. the contact started the ignition and a loud rattling noise emitted from the front passenger side of the vehicle. the failure recurred whenever the engine was in operation. the vehicle was taken to an authorized dealer who was unable to determine the cause of failure or pinpoint where the noise was coming from. the manufacturer was notified and the engineer was unable to provide a resolution. the approximate failure mileage was 4,888 updated 04/10/12.Mileage was 4888 miles. Vehicle Identification Number (VIN):1C3CC4FB4AN. Chrysler Sebring 2010 problem was reported in WESTBURY, NY. Original Owner. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. Chrysler Sebring 2010 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. DEALER'S NAME: WESTBURY JEEP . DEALER'S TELEPHONE NUMBER: 516-997-3900 .

Chrysler Sebring 2010 Engine And Engine Cooling Review #10454870

CHRYSLER SEBRING 2010 car safety problem was reported on Apr 10, 2012.CHRYSLER SEBRING 2010, manufactured by CHRYSLER GROUP LLC had a problem with ENGINE AND ENGINE COOLING . tl* the contact owns a 2010 chrysler sebring. the contact stated that the vehicle was parked when she noticed that a fire had erupted from the interior of the vehicle. the fire department was called and advised that the fire began on the front passenger side of the vehicle but could not determine the exact cause of the failure. the vehicle was not inspected for the failure nor repaired. the current and failure mileages were 59,000. .Vehicle was on fire. Mileage was 59000 miles. Vehicle Identification Number (VIN):1C3CC5FB5AN. Chrysler Sebring 2010 problem was reported in BIRMINGHAM, AL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Chrysler Sebring 2010 Engine Review #10461652

CHRYSLER SEBRING 2010 car safety problem was reported on June 10, 2012.CHRYSLER SEBRING 2010, manufactured by CHRYSLER GROUP LLC had a problem with ENGINE . tl* the contact rented a 2010 chrysler sebring touring. the contact stated that while attempting to park, the steering was difficult to turn and emitted a clicking noise. smoke also emitted from under the hood and within a second, the front end was on fire. the seattle fire department was present. the vehicle was towed to a tow yard for further investigation. the failure and current mileages were 38,217. .Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Mileage was 38217 miles. Vehicle Identification Number (VIN):1C3CC4FB9AN. Chrysler Sebring 2010 problem was reported in SEATTLE, WA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Chrysler Sebring 2010 Structure Body

Chrysler Sebring 2010 Structure Body Review #10462431

CHRYSLER SEBRING 2010 car safety problem was reported on Mar 30, 2012.CHRYSLER SEBRING 2010, manufactured by CHRYSLER GROUP LLC had a problem with STRUCTURE:BODY . tl* the contact owns a 2010 chrysler sebring. the contact stated that the driver and passenger doors were jamming against the fenders, which prevented the doors from opening. the vehicle was taken to a local repair shop, who diagnosed that both of the fenders were not aligned and needed to be repaired. the manufacturer was made aware of the failure and did not offer any assistance. the vehicle was not repaired. the failure and current mileages were 39,953..0 person(s) were injured. 0 person(s) died.Mileage was 39953 miles. Vehicle Identification Number (VIN):1C3CC5FB3AN. Chrysler Sebring 2010 problem was reported in BATON ROUGE, LA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Chrysler Sebring 2010 Service Brakes

Chrysler Sebring 2010 Service Brakes Review #10487187

CHRYSLER SEBRING 2010 car safety problem was reported on Nov 29, 2012.CHRYSLER SEBRING 2010, manufactured by Chrysler Group LLC had a problem with SERVICE BRAKES . tl* the contact owns a 2010 chrysler sebring. the contact stated that while traveling 70 mph, he attempted to apply the brakes and experienced a vibration in the steering wheel. the vehicle was able to be driven to the dealer where the failure could not be replicated. the vehicle was not repaired. the manufacturer was not contacted about the failure. the failure and current mileages were 28,207. .0 person(s) were injured. 0 person(s) died.Mileage was 28207 miles. Vehicle Identification Number (VIN):1C3BC6EV3AN. Chrysler Sebring 2010 problem was reported in FOUNTAIN VALLEY, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 70 mph.

Chrysler Sebring 2010 Service Brakes Review #10503054

CHRYSLER SEBRING 2010 car safety problem was reported on Dec 21, 2012.CHRYSLER SEBRING 2010, manufactured by Chrysler Group LLC had a problem with SERVICE BRAKES . brakes failed causing single vehicle collision with light pole. *tr.Vehicle was involved in a crash. 0 person(s) were injured. 0 person(s) died.Mileage was 51079 miles. Vehicle Identification Number (VIN):1C3CC5FBXAN. Chrysler Sebring 2010 problem was reported in SPRINGFIELD, IL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 25 mph.

Chrysler Sebring 2010 Service Brakes Review #10503059

CHRYSLER SEBRING 2010 car safety problem was reported on Dec 21, 2012.CHRYSLER SEBRING 2010, manufactured by Chrysler Group LLC had a problem with SERVICE BRAKES . tl* the contact owns a 2010 chrysler sebring. the contact stated that while driving approximately 25 mph, the contact attempted to decelerate but the brakes failed to respond. the contact had to swerve to avoid a collision and then crashed into a light pole. there were no injuries. the vehicle was taken to a private mechanic where the failure could not be replicated. the vehicle was not repaired. the manufacturer was contacted about the failure and stated that the vehicle was not included in nhtsa campaign number: 10v009000 (service brakes, hydraulic). the failure mileage was 51,079..Vehicle was involved in a crash. 0 person(s) were injured. 0 person(s) died.Mileage was 51079 miles. Vehicle Identification Number (VIN):1C3CC5FBXAN. Chrysler Sebring 2010 problem was reported in SPRINGFIELD, IL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 25 mph.

Chrysler Sebring 2010 Steering

Chrysler Sebring 2010 Steering Review #10507374

CHRYSLER SEBRING 2010 car safety problem was reported on Mar 31, 2013.CHRYSLER SEBRING 2010, manufactured by Chrysler Group LLC had a problem with STEERING . on may 31, 2013, i was traveling to visit family for easter. my twenty-month-old son was also in my vehicle. driving at approximately 30-35 miles per hour, less than 2 rpm, around a curve when i lost all power steering out of nowhere and could not steer. also my brakes went all the way to the floor and would not work. i was unable to control my vehicle. the vehicle went off the embankment uncontrollably, almost flipping and hitting concrete plates head on and that quick the vehicle came to a stop. during impact i smacked my face off of the steering wheel, suffering a bloody broken nose. my son thankfully received no injury. prior to the accident i noticed my brakes were shaking when applied, i made an appointment to check them for the following week. my car received damage to the front bumper and back bumper as well as a tire pressure sensor and a popped tire, totaling $419.00. on thursday april, 4, i went to go pick up my vehicle. the mechanic took the vehicle for a test drive for the first time since the accident to test the new tire. he notified me that i had no power steering and ruled my car unsafe to drive and documented his experience. i contacted my dealership where i bought the vehicle and they picked the car up and declared that my power steering pump failed and so far i have no received notice on the condition of the brakes. also on thursday, i called chrysler to examine further into the possibility of my vehicle being ones recalled. they informed that my vin was not under the recall and a special investigator will be in touch. no contact has yet been made. *tr.Vehicle was involved in a crash. 1 person(s) were injured. 0 person(s) died.Mileage was 57000 miles. Vehicle Identification Number (VIN):1C3CC5FB8AN. Chrysler Sebring 2010 problem was reported in CANTON, PA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 35 mph.

Chrysler Sebring 2010 Service Brakes

Chrysler Sebring 2010 Service Brakes Review #10507374

CHRYSLER SEBRING 2010 car safety problem was reported on Mar 31, 2013.CHRYSLER SEBRING 2010, manufactured by Chrysler Group LLC had a problem with SERVICE BRAKES . on may 31, 2013, i was traveling to visit family for easter. my twenty-month-old son was also in my vehicle. driving at approximately 30-35 miles per hour, less than 2 rpm, around a curve when i lost all power steering out of nowhere and could not steer. also my brakes went all the way to the floor and would not work. i was unable to control my vehicle. the vehicle went off the embankment uncontrollably, almost flipping and hitting concrete plates head on and that quick the vehicle came to a stop. during impact i smacked my face off of the steering wheel, suffering a bloody broken nose. my son thankfully received no injury. prior to the accident i noticed my brakes were shaking when applied, i made an appointment to check them for the following week. my car received damage to the front bumper and back bumper as well as a tire pressure sensor and a popped tire, totaling $419.00. on thursday april, 4, i went to go pick up my vehicle. the mechanic took the vehicle for a test drive for the first time since the accident to test the new tire. he notified me that i had no power steering and ruled my car unsafe to drive and documented his experience. i contacted my dealership where i bought the vehicle and they picked the car up and declared that my power steering pump failed and so far i have no received notice on the condition of the brakes. also on thursday, i called chrysler to examine further into the possibility of my vehicle being ones recalled. they informed that my vin was not under the recall and a special investigator will be in touch. no contact has yet been made. *tr.Vehicle was involved in a crash. 1 person(s) were injured. 0 person(s) died.Mileage was 57000 miles. Vehicle Identification Number (VIN):1C3CC5FB8AN. Chrysler Sebring 2010 problem was reported in CANTON, PA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 35 mph.

Chrysler Sebring 2010 Air Bags

Chrysler Sebring 2010 Air Bags Review #10524403

CHRYSLER SEBRING 2010 car safety problem was reported on June 30, 2013.CHRYSLER SEBRING 2010, manufactured by Chrysler Group LLC had a problem with AIR BAGS . tl* the contact owns a 2010 chrysler sebring. the contact stated that while driving 60 mph, the driver and passenger air bags failed to deploy when the vehicle hit a rock in the road, which caused the vehicle to crash, and rolled over. the contact sustained bruising and the passenger sustained a broken left shoulder. a police report was filed and the vehicle was totaled. the manufacturer was not notified. the approximate failure mileage was 12,000. *tr.Vehicle was involved in a crash. 0 person(s) were injured. 0 person(s) died.Mileage was 12000 miles. Vehicle Identification Number (VIN):1C3CC5FB6AN. Chrysler Sebring 2010 problem was reported in HOT SPRINGS, AR. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 60 mph.

Chrysler Sebring 2010 Electrical System

Chrysler Sebring 2010 Electrical System Review #10545984

CHRYSLER SEBRING 2010 car safety problem was reported on Aug 20, 2013.CHRYSLER SEBRING 2010, manufactured by Chrysler Group LLC had a problem with ELECTRICAL SYSTEM . vehicle stall first time on august 20 2013. it would only get up to 10mph. had to get it towed to shop. they cleaned the throttle work for about a month. on september 18 problem occurred again the red light which looks like a lighting bolt came on . lost power pull over on interstate crank up again work fine until september 25 when it stall again had to get a tow truck again to take it to another shop. they told me that the first shop should not have replace throttle that only work temporarily. so they replace the whole throttle and reprogram this cost me a total of $733. this can be dangerous going down the interstate lucky didn't cost a accident. this should never happen especially 3 years old. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 80000 miles. Vehicle Identification Number (VIN):1C3CC4FB2AN. Chrysler Sebring 2010 problem was reported in DOUGLASVILLE, GA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 10 mph.

Chrysler Sebring 2010 Structure Body

Chrysler Sebring 2010 Structure Body Review #10549492

CHRYSLER SEBRING 2010 car safety problem was reported on July 04, 2013.CHRYSLER SEBRING 2010, manufactured by Chrysler Group LLC had a problem with STRUCTURE:BODY . tl* the contact owns a 2010 chrysler sebring. the contact stated that while driving 30 mph, the hood flew open without warning. the vehicle was taken to a local mechanic for repairs. the vehicle was not repaired. the failure mileage was 66,207. .0 person(s) were injured. 0 person(s) died.Mileage was 66207 miles. Vehicle Identification Number (VIN):1C3CC4FB6AN. Chrysler Sebring 2010 problem was reported in HERMITAGE, TN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 30 mph.

Chrysler Sebring 2010 Suspension

Chrysler Sebring 2010 Suspension Review #10551281

CHRYSLER SEBRING 2010 car safety problem was reported on Sept 01, 2012.CHRYSLER SEBRING 2010, manufactured by Chrysler Group LLC had a problem with SUSPENSION . 2010 chrysler sebring. consumer writes in regards to vehicle racking pinion problems. *smd the consumer stated the rack pinion failed again three years later. when the consumer picked the vehicle up, from the dealer, the noise was still there. the consumer returned to the dealer, and according to their diagnosis, the vehicle needed a new steering column. when the consumer picked the vehicle up again, the noise was still present. the technician informed the consumer, the noise was coming from the rack and pinion again, and there was no remedy. later in the evening, the vehicle began making another noise, and was taken back to the dealer, where they determined the left front axle and wheel bearing needed to be replaced. .Chrysler Sebring 2010 problem was reported in WASHINGTON, DC. Original Owner. Vehicle was purchased on Oct 31, 2010. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. DEALER'S NAME: NABER DODGE .

Chrysler Sebring 2010 Suspension Front Wheel Bearing

Chrysler Sebring 2010 Suspension Front Wheel Bearing Review #10551281

CHRYSLER SEBRING 2010 car safety problem was reported on Sept 01, 2012.CHRYSLER SEBRING 2010, manufactured by Chrysler Group LLC had a problem with SUSPENSION:FRONT:WHEEL BEARING . 2010 chrysler sebring. consumer writes in regards to vehicle racking pinion problems. *smd the consumer stated the rack pinion failed again three years later. when the consumer picked the vehicle up, from the dealer, the noise was still there. the consumer returned to the dealer, and according to their diagnosis, the vehicle needed a new steering column. when the consumer picked the vehicle up again, the noise was still present. the technician informed the consumer, the noise was coming from the rack and pinion again, and there was no remedy. later in the evening, the vehicle began making another noise, and was taken back to the dealer, where they determined the left front axle and wheel bearing needed to be replaced. .Chrysler Sebring 2010 problem was reported in WASHINGTON, DC. Original Owner. Vehicle was purchased on Oct 31, 2010. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. DEALER'S NAME: NABER DODGE .

Chrysler Sebring 2010 Steering Rack And Pinion

Chrysler Sebring 2010 Steering Rack And Pinion Review #10551281

CHRYSLER SEBRING 2010 car safety problem was reported on Sept 01, 2012.CHRYSLER SEBRING 2010, manufactured by Chrysler Group LLC had a problem with STEERING:RACK AND PINION . 2010 chrysler sebring. consumer writes in regards to vehicle racking pinion problems. *smd the consumer stated the rack pinion failed again three years later. when the consumer picked the vehicle up, from the dealer, the noise was still there. the consumer returned to the dealer, and according to their diagnosis, the vehicle needed a new steering column. when the consumer picked the vehicle up again, the noise was still present. the technician informed the consumer, the noise was coming from the rack and pinion again, and there was no remedy. later in the evening, the vehicle began making another noise, and was taken back to the dealer, where they determined the left front axle and wheel bearing needed to be replaced. .Chrysler Sebring 2010 problem was reported in WASHINGTON, DC. Original Owner. Vehicle was purchased on Oct 31, 2010. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. DEALER'S NAME: NABER DODGE .

Chrysler Sebring 2010 Steering Column

Chrysler Sebring 2010 Steering Column Review #10551281

CHRYSLER SEBRING 2010 car safety problem was reported on Sept 01, 2012.CHRYSLER SEBRING 2010, manufactured by Chrysler Group LLC had a problem with STEERING:COLUMN . 2010 chrysler sebring. consumer writes in regards to vehicle racking pinion problems. *smd the consumer stated the rack pinion failed again three years later. when the consumer picked the vehicle up, from the dealer, the noise was still there. the consumer returned to the dealer, and according to their diagnosis, the vehicle needed a new steering column. when the consumer picked the vehicle up again, the noise was still present. the technician informed the consumer, the noise was coming from the rack and pinion again, and there was no remedy. later in the evening, the vehicle began making another noise, and was taken back to the dealer, where they determined the left front axle and wheel bearing needed to be replaced. .Chrysler Sebring 2010 problem was reported in WASHINGTON, DC. Original Owner. Vehicle was purchased on Oct 31, 2010. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. DEALER'S NAME: NABER DODGE .

Chrysler Sebring 2010 Power Train

Chrysler Sebring 2010 Power Train Review #10551281

CHRYSLER SEBRING 2010 car safety problem was reported on Sept 01, 2012.CHRYSLER SEBRING 2010, manufactured by Chrysler Group LLC had a problem with POWER TRAIN . 2010 chrysler sebring. consumer writes in regards to vehicle racking pinion problems. *smd the consumer stated the rack pinion failed again three years later. when the consumer picked the vehicle up, from the dealer, the noise was still there. the consumer returned to the dealer, and according to their diagnosis, the vehicle needed a new steering column. when the consumer picked the vehicle up again, the noise was still present. the technician informed the consumer, the noise was coming from the rack and pinion again, and there was no remedy. later in the evening, the vehicle began making another noise, and was taken back to the dealer, where they determined the left front axle and wheel bearing needed to be replaced. .Chrysler Sebring 2010 problem was reported in WASHINGTON, DC. Original Owner. Vehicle was purchased on Oct 31, 2010. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. DEALER'S NAME: NABER DODGE .

Chrysler Sebring 2010 Suspension

Chrysler Sebring 2010 Suspension Review #10556714

CHRYSLER SEBRING 2010 car safety problem was reported on Sept 12, 2012.CHRYSLER SEBRING 2010, manufactured by Chrysler Group LLC had a problem with SUSPENSION . this car for sure is a lemon. i am attaching the e-mail that i have sent to several people. this car has given me nothing but trouble. please help me with some much needed advice. last september 2012, the rack and pinion failed. the vehicle had 52,000 miles on when the first rack and pinion failed. the vehicle was repaired. however, it still had the same noise as before. the dealer then stated the vehicle needed a new steering column. then i was told the axle and wheel bearing were bad. ..updated 12/17/13 *bf .0 person(s) were injured. 0 person(s) died.Mileage was 52000 miles. Chrysler Sebring 2010 problem was reported in OCEAN ISLE BEACH, NC. Original Owner. Vehicle was purchased on Oct 31, 2010. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. DEALER'S NAME: NABER DODGE .

Chrysler Sebring 2010 Steering Rack And Pinion

Chrysler Sebring 2010 Steering Rack And Pinion Review #10556714

CHRYSLER SEBRING 2010 car safety problem was reported on Sept 12, 2012.CHRYSLER SEBRING 2010, manufactured by Chrysler Group LLC had a problem with STEERING:RACK AND PINION . this car for sure is a lemon. i am attaching the e-mail that i have sent to several people. this car has given me nothing but trouble. please help me with some much needed advice. last september 2012, the rack and pinion failed. the vehicle had 52,000 miles on when the first rack and pinion failed. the vehicle was repaired. however, it still had the same noise as before. the dealer then stated the vehicle needed a new steering column. then i was told the axle and wheel bearing were bad. ..updated 12/17/13 *bf .0 person(s) were injured. 0 person(s) died.Mileage was 52000 miles. Chrysler Sebring 2010 problem was reported in OCEAN ISLE BEACH, NC. Original Owner. Vehicle was purchased on Oct 31, 2010. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. DEALER'S NAME: NABER DODGE .

Chrysler Sebring 2010 Steering Column

Chrysler Sebring 2010 Steering Column Review #10556714

CHRYSLER SEBRING 2010 car safety problem was reported on Sept 12, 2012.CHRYSLER SEBRING 2010, manufactured by Chrysler Group LLC had a problem with STEERING:COLUMN . this car for sure is a lemon. i am attaching the e-mail that i have sent to several people. this car has given me nothing but trouble. please help me with some much needed advice. last september 2012, the rack and pinion failed. the vehicle had 52,000 miles on when the first rack and pinion failed. the vehicle was repaired. however, it still had the same noise as before. the dealer then stated the vehicle needed a new steering column. then i was told the axle and wheel bearing were bad. ..updated 12/17/13 *bf .0 person(s) were injured. 0 person(s) died.Mileage was 52000 miles. Chrysler Sebring 2010 problem was reported in OCEAN ISLE BEACH, NC. Original Owner. Vehicle was purchased on Oct 31, 2010. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. DEALER'S NAME: NABER DODGE .

Chrysler Sebring 2010 Electrical System

Chrysler Sebring 2010 Electrical System Review #10558651

CHRYSLER SEBRING 2010 car safety problem was reported on Dec 29, 2013.CHRYSLER SEBRING 2010, manufactured by Chrysler Group LLC had a problem with ELECTRICAL SYSTEM . the electronic throttle control light came on. the car decelerated and was idling high/rough. it will not pick up speed beyond 25-30 mph. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 83000 miles. Chrysler Sebring 2010 problem was reported in HOMESTEAD, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 60 mph.

Chrysler Sebring 2010 Vehicle Speed Control

Chrysler Sebring 2010 Vehicle Speed Control Review #10558651

CHRYSLER SEBRING 2010 car safety problem was reported on Dec 29, 2013.CHRYSLER SEBRING 2010, manufactured by Chrysler Group LLC had a problem with VEHICLE SPEED CONTROL . the electronic throttle control light came on. the car decelerated and was idling high/rough. it will not pick up speed beyond 25-30 mph. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 83000 miles. Chrysler Sebring 2010 problem was reported in HOMESTEAD, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 60 mph.

Chrysler Sebring 2010 Electronic Stability Control

Chrysler Sebring 2010 Electronic Stability Control Review #10574958

CHRYSLER SEBRING 2010 car safety problem was reported on Mar 18, 2014.CHRYSLER SEBRING 2010, manufactured by Chrysler Group LLC had a problem with ELECTRONIC STABILITY CONTROL . the car is less then 6mo i purchased the car with extended warranty, they now saying that the extended warrant only cover the engine and the transmission, the electronic throttle control is faulty, the whole throttle body has to be replace the shop then tells me that throttle body on the car was from a junk yard the sensor is warped. j.d byryder has been giving me the run around about fixing my car that i still pay a car note on every two weeks. and have never missed a payment. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 104992 miles. Vehicle Identification Number (VIN):1C3CC4FB3AN. Chrysler Sebring 2010 problem was reported in ST. LOUIS, MO. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 40 mph.

Chrysler Sebring 2010 Power Train

Chrysler Sebring 2010 Power Train Review #10574958

CHRYSLER SEBRING 2010 car safety problem was reported on Mar 18, 2014.CHRYSLER SEBRING 2010, manufactured by Chrysler Group LLC had a problem with POWER TRAIN . the car is less then 6mo i purchased the car with extended warranty, they now saying that the extended warrant only cover the engine and the transmission, the electronic throttle control is faulty, the whole throttle body has to be replace the shop then tells me that throttle body on the car was from a junk yard the sensor is warped. j.d byryder has been giving me the run around about fixing my car that i still pay a car note on every two weeks. and have never missed a payment. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 104992 miles. Vehicle Identification Number (VIN):1C3CC4FB3AN. Chrysler Sebring 2010 problem was reported in ST. LOUIS, MO. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 40 mph.

Chrysler Sebring 2010 Service Brakes

Chrysler Sebring 2010 Service Brakes Review #10583181

CHRYSLER SEBRING 2010 car safety problem was reported on Apr 07, 2011.CHRYSLER SEBRING 2010, manufactured by Chrysler Group LLC had a problem with SERVICE BRAKES . tl* the contact owns a 2010 chrysler sebring. the contact stated that while driving approximately 65 mph, the vehicle suddenly stalled. the vehicle was taken to an independent mechanic who diagnosed that the totally integrated power module was defective. the contact also indicated that while driving in reverse and applying the brakes, the vehicle failed to stop. the vehicle was not repaired. the manufacturer was notified. the failure mileage was 40,000. .0 person(s) were injured. 0 person(s) died.Mileage was 40000 miles. Vehicle Identification Number (VIN):1C3CC5FB7AN. Chrysler Sebring 2010 problem was reported in HUNNINGTON BEACH, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 65 mph.

Chrysler Sebring 2010 Electrical System

Chrysler Sebring 2010 Electrical System Review #10583181

CHRYSLER SEBRING 2010 car safety problem was reported on Apr 07, 2011.CHRYSLER SEBRING 2010, manufactured by Chrysler Group LLC had a problem with ELECTRICAL SYSTEM . tl* the contact owns a 2010 chrysler sebring. the contact stated that while driving approximately 65 mph, the vehicle suddenly stalled. the vehicle was taken to an independent mechanic who diagnosed that the totally integrated power module was defective. the contact also indicated that while driving in reverse and applying the brakes, the vehicle failed to stop. the vehicle was not repaired. the manufacturer was notified. the failure mileage was 40,000. .0 person(s) were injured. 0 person(s) died.Mileage was 40000 miles. Vehicle Identification Number (VIN):1C3CC5FB7AN. Chrysler Sebring 2010 problem was reported in HUNNINGTON BEACH, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 65 mph.

Chrysler Sebring 2010 Electronic Stability Control

Chrysler Sebring 2010 Electronic Stability Control Review #10598238

CHRYSLER SEBRING 2010 car safety problem was reported on June 13, 2014.CHRYSLER SEBRING 2010, manufactured by Chrysler Group LLC had a problem with ELECTRONIC STABILITY CONTROL . i was driving my car last week and the electronic throttle control light came on then went off happened maybe 3 or 4 times but nothing of it... so today i'm on my way from work i make a stop on my way home go to start the car and leave and i turned the key but nothing the radio and lights all work but it's not even attempting to start. i thought maybe i needed a jump i tried that and still nothing i have roughly 56000 miles and i service the car regularly i need an explanation because this is obviously a common problem from multiple threads i've read about this car. chrysler needs to be held accountable!!!! *js.0 person(s) were injured. 0 person(s) died.Mileage was 55812 miles. Vehicle Identification Number (VIN):1C3CC4FB1AN. Chrysler Sebring 2010 problem was reported in LINDEN, NJ. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. Chrysler Sebring 2010 drive type:FWD.

Chrysler Sebring 2010 Vehicle Speed Control

Chrysler Sebring 2010 Vehicle Speed Control Review #10598238

CHRYSLER SEBRING 2010 car safety problem was reported on June 13, 2014.CHRYSLER SEBRING 2010, manufactured by Chrysler Group LLC had a problem with VEHICLE SPEED CONTROL . i was driving my car last week and the electronic throttle control light came on then went off happened maybe 3 or 4 times but nothing of it... so today i'm on my way from work i make a stop on my way home go to start the car and leave and i turned the key but nothing the radio and lights all work but it's not even attempting to start. i thought maybe i needed a jump i tried that and still nothing i have roughly 56000 miles and i service the car regularly i need an explanation because this is obviously a common problem from multiple threads i've read about this car. chrysler needs to be held accountable!!!! *js.0 person(s) were injured. 0 person(s) died.Mileage was 55812 miles. Vehicle Identification Number (VIN):1C3CC4FB1AN. Chrysler Sebring 2010 problem was reported in LINDEN, NJ. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. Chrysler Sebring 2010 drive type:FWD.

Chrysler Sebring 2010 Unknown Or Other

Chrysler Sebring 2010 Unknown Or Other Review #10598238

CHRYSLER SEBRING 2010 car safety problem was reported on June 13, 2014.CHRYSLER SEBRING 2010, manufactured by Chrysler Group LLC had a problem with UNKNOWN OR OTHER . i was driving my car last week and the electronic throttle control light came on then went off happened maybe 3 or 4 times but nothing of it... so today i'm on my way from work i make a stop on my way home go to start the car and leave and i turned the key but nothing the radio and lights all work but it's not even attempting to start. i thought maybe i needed a jump i tried that and still nothing i have roughly 56000 miles and i service the car regularly i need an explanation because this is obviously a common problem from multiple threads i've read about this car. chrysler needs to be held accountable!!!! *js.0 person(s) were injured. 0 person(s) died.Mileage was 55812 miles. Vehicle Identification Number (VIN):1C3CC4FB1AN. Chrysler Sebring 2010 problem was reported in LINDEN, NJ. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. Chrysler Sebring 2010 drive type:FWD.

Chrysler Sebring 2010 Wheels

Chrysler Sebring 2010 Wheels Review #10599181

CHRYSLER SEBRING 2010 car safety problem was reported on June 14, 2014.CHRYSLER SEBRING 2010, manufactured by Chrysler Group LLC had a problem with WHEELS . my tire valve stem busted causing my tire to go flat while driving. this is the second one that has broke. worried for safety especially with children in the car. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 64000 miles. Vehicle Identification Number (VIN):1C3CC5FB6AN. Chrysler Sebring 2010 problem was reported in BELOIT, WI. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 50 mph.

Chrysler Sebring 2010 Tires

Chrysler Sebring 2010 Tires Review #10599181

CHRYSLER SEBRING 2010 car safety problem was reported on June 14, 2014.CHRYSLER SEBRING 2010, manufactured by Chrysler Group LLC had a problem with TIRES . my tire valve stem busted causing my tire to go flat while driving. this is the second one that has broke. worried for safety especially with children in the car. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 64000 miles. Vehicle Identification Number (VIN):1C3CC5FB6AN. Chrysler Sebring 2010 problem was reported in BELOIT, WI. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 50 mph.

Chrysler Sebring 2010 Air Bags

Chrysler Sebring 2010 Air Bags Review #10606052

CHRYSLER SEBRING 2010 car safety problem was reported on May 30, 2014.CHRYSLER SEBRING 2010, manufactured by Chrysler (FCA US LLC) had a problem with AIR BAGS . i was in a car accident where another car hit the passenger side and only the passenger air bag deployed. the crash was bad enough where the other airbags should have deployed. i suffered injuries to my back, neck and arms. *tr.Vehicle was involved in a crash. 1 person(s) were injured. 0 person(s) died.Mileage was 105475 miles. Vehicle Identification Number (VIN):1C3CC4FB5AN. Chrysler Sebring 2010 problem was reported in ARVIN, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 30 mph.

Chrysler Sebring 2010 Power Train

Chrysler Sebring 2010 Power Train Review #10606731

CHRYSLER SEBRING 2010 car safety problem was reported on June 02, 2014.CHRYSLER SEBRING 2010, manufactured by Chrysler Group LLC had a problem with POWER TRAIN . first time anything happened - hotoil warning, check engine light and a weird temp light came on - but all gauges were fine and car was driving fine. took it to a couple different places to have a diagnostic run on the car. codes came back that the ecm and tcm were not communicating. system was reset and car was fine. a few weeks later same thing. my husband was driving and it also quit shifting. at a stoplight we felt a clunk as it slipped into gear lights went out and everything seemed fine. about a week ago - same thing happened, took it to chrysler garage and for $100.00 ran a diagnostic and told us that the powertrain control module was defective. they updated the computer and it seemed to work fine. tonight (only a week since it was updated) all of the lights came back on and it has quit shifting. i am going to have to go back to chrysler for a $3000.00 + replacement of the entire pcm (powertrain control module is the main computer system in the car) i have a warranty on the powertrain - but of course this part is not covered - even though it is the powertrain control module. it seems odd to me that the 2009 sebring had a recall for this exact part and so did the 2011, but not the 2010. strange -- and i can honestly say i hate chrysler --- totally rude and unconcerned about the financial burden this will cause my family --- if the pcm is required for the powertrain to function properly - it should be considered part of the powertrain and should be covered under the warranty. also i would be very interested to know why the 2010 is not being recalled for the same part as the 2009 and 2011.0 person(s) were injured. 0 person(s) died.Mileage was 85000 miles. Vehicle Identification Number (VIN):1C3CC4FB3AN. Chrysler Sebring 2010 problem was reported in GRAND JUNCTION, CO. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Chrysler Sebring 2010 Structure Body

Chrysler Sebring 2010 Structure Body Review #10616675

CHRYSLER SEBRING 2010 car safety problem was reported on May 25, 2013.CHRYSLER SEBRING 2010, manufactured by Chrysler Group LLC had a problem with STRUCTURE:BODY . on the passage side the door is shifting and the fender bends when your try to open the door, it has been fixed once and it is happening again..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1C3CC5FD6AN. Chrysler Sebring 2010 problem was reported in HENDERSON, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Chrysler Sebring 2010 Electrical System

Chrysler Sebring 2010 Electrical System Review #10627479

CHRYSLER SEBRING 2010 car safety problem was reported on Aug 22, 2014.CHRYSLER SEBRING 2010, manufactured by Chrysler Group LLC had a problem with ELECTRICAL SYSTEM . tl* the contact owns a 2010 chrysler sebring. while driving approximately 35 mph, the speedometer failed. the vehicle was not diagnosed or repaired. the manufacturer was not notified. the approximate failure mileage was 73,000. .0 person(s) were injured. 0 person(s) died.Mileage was 73000 miles. Vehicle Identification Number (VIN):1C3CC5FB5AN. Chrysler Sebring 2010 problem was reported in RALEIGH, NC. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 35 mph.

Chrysler Sebring 2010 Visibility/wiper

Chrysler Sebring 2010 Visibility/wiper Review #10649168

CHRYSLER SEBRING 2010 car safety problem was reported on Aug 06, 2014.CHRYSLER SEBRING 2010, manufactured by Chrysler Group LLC had a problem with VISIBILITY/WIPER . wipers have a mind of their own. sometimes they just quit working during a rain storm and other times they change speed on their own and other times they stop right in your field of vision during a rain storm. you can sometimes get them working again by pulling off the road if you can do safely and shut the car off and restart it and things go back to normal. i had a mechanic look at it and there is nothing wrong mechanically wrong with the wiper motor or linkage. the problem is with the intergrated body computer that controls the wiper system. i told my chrysler dealership about it and they said that there wasn't a recall about it yet and that yes it is the computer that is the problem and other people are having the same problem. this is a serious safety problem that needs fixed before there are fatal accidents..0 person(s) were injured. 0 person(s) died.Mileage was 27245 miles. Vehicle Identification Number (VIN):1C3CC5FB4AN. Chrysler Sebring 2010 problem was reported in PITTSBURGH, PA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 25 mph.

Chrysler Sebring 2010 Electrical System

Chrysler Sebring 2010 Electrical System Review #10654051

CHRYSLER SEBRING 2010 car safety problem was reported on Oct 21, 2014.CHRYSLER SEBRING 2010, manufactured by Chrysler Group LLC had a problem with ELECTRICAL SYSTEM . this incedent occurred will traveling on the freeway at 65 mph. without notice the electronic throttle control light illuminate and the car decelerated from 65mph to 35mph. this deceleration almost cause the car following to almost rear-end my car. this problem has occurred on other dodge/chrysler vehicle. i would like for this to be investigated before someone lose their life..0 person(s) were injured. 0 person(s) died.Mileage was 23458 miles. Vehicle Identification Number (VIN):1C3CC5FB5AN. Chrysler Sebring 2010 problem was reported in SAN ANTONIO, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 65 mph.

Chrysler Sebring 2010 Engine

Chrysler Sebring 2010 Engine Review #10654051

CHRYSLER SEBRING 2010 car safety problem was reported on Oct 21, 2014.CHRYSLER SEBRING 2010, manufactured by Chrysler Group LLC had a problem with ENGINE . this incedent occurred will traveling on the freeway at 65 mph. without notice the electronic throttle control light illuminate and the car decelerated from 65mph to 35mph. this deceleration almost cause the car following to almost rear-end my car. this problem has occurred on other dodge/chrysler vehicle. i would like for this to be investigated before someone lose their life..0 person(s) were injured. 0 person(s) died.Mileage was 23458 miles. Vehicle Identification Number (VIN):1C3CC5FB5AN. Chrysler Sebring 2010 problem was reported in SAN ANTONIO, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 65 mph.

Chrysler Sebring 2010 Electrical System

Chrysler Sebring 2010 Electrical System Review #10661300

CHRYSLER SEBRING 2010 car safety problem was reported on Nov 28, 2014.CHRYSLER SEBRING 2010, manufactured by Chrysler Group LLC had a problem with ELECTRICAL SYSTEM . i was driving my vehicle at 55 mph when my electronic throttle control light came on and my speed drop down to a stuttering 35 mph which almost cause the car behind me to rear end me. i have the bumper to bumper power train warranty but i was told that the part my not be covered..0 person(s) were injured. 0 person(s) died.Mileage was 101569 miles. Vehicle Identification Number (VIN):1C3CC4FB8AN. Chrysler Sebring 2010 problem was reported in COMMERCE, GA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 55 mph.

Air Bags 2 Review(s)

Electrical System 8 Review(s)

Electronic Stability Control 2 Review(s)

Engine 2 Review(s)

Engine And Engine Cooling 2 Review(s)

Engine And Engine Cooling Exhaust System 1 Review(s)

Exterior Lighting Tail Lights 1 Review(s)

Power Train 3 Review(s)

Seats 1 Review(s)

Service Brakes 5 Review(s)

Service Brakes, Hydraulic 1 Review(s)

Service Brakes, Hydraulic Antilock Abs Warning Light 1 Review(s)

Steering 1 Review(s)

Steering Column 2 Review(s)

Steering Rack And Pinion 2 Review(s)

Structure Body 3 Review(s)

Suspension 3 Review(s)

Suspension Front Wheel Bearing 1 Review(s)

Tires 1 Review(s)

Tires Pressure Monitoring And Regulating Systems 2 Review(s)

Unknown Or Other 1 Review(s)

Vehicle Speed Control 2 Review(s)

Visibility/wiper 1 Review(s)

Wheels 1 Review(s)