Car-and-Safety.com

Toyota Venza 2010 Service Brakes, Hydraulic

Toyota Venza 2010 Service Brakes, Hydraulic Review #10305796

TOYOTA VENZA 2010 car safety problem was reported on Jan 14, 2010.TOYOTA VENZA 2010, manufactured by TOYOTA MOTOR CORPORATION had a problem with SERVICE BRAKES, HYDRAULIC . this problem which i have noticed in my new 2010 toyota venza is similar to the problem being reported in the 2010 prius with the anti-lock brake system. what i have observed is frequent jerks which can be termed as inconsistent brake feel during slow and steady application of brakes on slick road. this happened on the day when it snowed here in columbus ohio this january. i do not recall the exact date but there result of the action of applying brake did not immediately stop the car and resulted in a drag. surprisingly, the jerks on application on the brake shock me and i felt as if there was something wrong with the braking system. i am not certain if this is a problem that is exactly similar to what people have been complaining with 2010 prius but 2010 venza is a new model of cars introduced by toyota in the last year and i am suspecting this could be the issue. i will make a visit to the dealership this weekend to discuss this issue along with the recall of the floor mat but i am hoping this is not overlooked. *tr.Mileage was 521 miles. Vehicle Identification Number (VIN):4T3ZA3BB4AU. Toyota Venza 2010 problem was reported in DUBLIN, OH. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 30 mph.

Toyota Venza 2010 Vehicle Speed Control

Toyota Venza 2010 Vehicle Speed Control Review #10314984

TOYOTA VENZA 2010 car safety problem was reported on Feb 27, 2010.TOYOTA VENZA 2010, manufactured by TOYOTA MOTOR CORPORATION had a problem with VEHICLE SPEED CONTROL . at 2 pm today, i had just returned from running errands and was pulling into my driveway and pushed the garage door opener. at that point, my foot was on the brake and not on the gas pedal; i was coasting at a very low speed with the natural forward movement of the car carrying me into the garage (my driveway is only about two-car-lengths long). as i neared the garage door, now halfway open, my car suddenly revved to a high speed and was headed straight toward smashing into the garage door. as i said, my foot was on the brake and so i then put the other foot on the brake as well. then, i slammed the car into neutral and heard the engine just rev at a very high speed. i then slammed the car into reverse then park, again hearing the engine rev at a high speed. i then pushed the button to shut the car off. i immediately looked down and saw that the gas pedal was not stuck on any floor mat. and, as i said, my foot was on the brake and not on the gas pedal. i then sat there for a few minutes with my heart racing, thinking that if this had happened two minutes ago while on the road, i could have been killed. or, if i hadn¿t been quick to act properly, my car would have ended up in my family room¿what if i didn¿t have my foot already on the brake¿surely i wouldn¿t have been able to stop the vehicle as quickly. i felt just like the woman at the congressional hearings, in tears, describing her experience with her lexus. the car suddenly revved to a high speed, and wouldn¿t slow down in neutral or reverse or park. shutting off the engine was the only option to make the high-speed throttling to stop. these facts are clear: ¿the gas pedal was not stuck on any floor mat ¿the gas pedal was not depressed immediately prior to the sudden acceleration ¿the brake pedal was depressed immediately prior to the sudden acceleration ¿the sudden acceleration was at very high rpm¿s ¿the high rpm¿s wouldn¿t stop until the engine was shut off. *tr .Mileage was 1600 miles. Vehicle Identification Number (VIN):4T3BK3BBXAU. Toyota Venza 2010 problem was reported in ALEXANDRIA, VA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 1 mph.

Toyota Venza 2010 Vehicle Speed Control Review #10315952

TOYOTA VENZA 2010 car safety problem was reported on Feb 28, 2010.TOYOTA VENZA 2010, manufactured by TOYOTA MOTOR CORPORATION had a problem with VEHICLE SPEED CONTROL . i have a 2010 fwd venza with 2000 miles. this past weekend we had four separate instances of the unexpected engine revving. after taking foot off gas and applying brake lightly, preparing for a full brake. the engine 'revved' for approximately 1-2 seconds. oddly, no acceleration occurred in the vehicle. this occurred in residential neighborhoods, typical speed 25-35. the happened once with me and three times with my wife. plan to take vehicle to dealer and call toyota consumer experience hotline. *tr.Mileage was 2000 miles. Vehicle Identification Number (VIN):4T3ZA3BB9AU. Toyota Venza 2010 problem was reported in MORTON, PA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Toyota Venza 2010 drive type:FWD. VEHICLE SPEED: 30 mph.

Toyota Venza 2010 Vehicle Speed Control Review #10316527

TOYOTA VENZA 2010 car safety problem was reported on Feb 27, 2010.TOYOTA VENZA 2010, manufactured by TOYOTA MOTOR CORPORATION had a problem with VEHICLE SPEED CONTROL . my foot was on the brake and not on the gas pedal; i was coasting at a very low speed with the natural forward movement of the car carrying me into the garage (my driveway is only about two-car-lengths long). as i neared the garage door, now halfway open, my car suddenly revved to a high speed and was headed straight toward smashing into the garage door. as i said, my foot was on the brake and so i then put the other foot on the brake as well. then, i slammed the car into neutral and heard the engine just rev at a very high speed. the sua seeemed to happen as i pushed the button on the door opener updated 4/7/2010 *cn the consumer stated he experienced sudden acceleration. the dealer claimed the floor mat was the cause. updated 06/04/10.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):4T3BK3BBXAU. Toyota Venza 2010 problem was reported in ALEXANDRIA, VA. Original Owner. Vehicle was purchased on Dec 23, 2009. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Toyota Venza 2010 TRANSMISSION TYPE: AUTO. DEALER'S NAME: LUSTINE TOYOTA . DEALER'S TELEPHONE NUMBER: 866-843-0264 . DEALER'S CITY: WOODBRIDGE . DEALER'S STATE CODE: VA.

Toyota Venza 2010 Fuel System, Gasoline

Toyota Venza 2010 Fuel System, Gasoline Review #10316527

TOYOTA VENZA 2010 car safety problem was reported on Feb 27, 2010.TOYOTA VENZA 2010, manufactured by TOYOTA MOTOR CORPORATION had a problem with FUEL SYSTEM, GASOLINE . my foot was on the brake and not on the gas pedal; i was coasting at a very low speed with the natural forward movement of the car carrying me into the garage (my driveway is only about two-car-lengths long). as i neared the garage door, now halfway open, my car suddenly revved to a high speed and was headed straight toward smashing into the garage door. as i said, my foot was on the brake and so i then put the other foot on the brake as well. then, i slammed the car into neutral and heard the engine just rev at a very high speed. the sua seeemed to happen as i pushed the button on the door opener updated 4/7/2010 *cn the consumer stated he experienced sudden acceleration. the dealer claimed the floor mat was the cause. updated 06/04/10.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):4T3BK3BBXAU. Toyota Venza 2010 problem was reported in ALEXANDRIA, VA. Original Owner. Vehicle was purchased on Dec 23, 2009. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Toyota Venza 2010 TRANSMISSION TYPE: AUTO. DEALER'S NAME: LUSTINE TOYOTA . DEALER'S TELEPHONE NUMBER: 866-843-0264 . DEALER'S CITY: WOODBRIDGE . DEALER'S STATE CODE: VA.

Toyota Venza 2010 Equipment Electrical Radio/tape Deck/cd Etc.

Toyota Venza 2010 Equipment Electrical Radio/tape Deck/cd Etc. Review #10317149

TOYOTA VENZA 2010 car safety problem was reported on Jan 20, 2010.TOYOTA VENZA 2010, manufactured by TOYOTA MOTOR CORPORATION had a problem with EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC. . tl* the contact owns a 2010 toyota venza. the contact stated that the radio got hot up 145 degrees. the contact took the vehicle to a dealer twice. the dealer replaced the radio but that did not remedy the issue with the temperature of the radio. the contact took the vehicle back to the dealer and the dealer informed the contact there is nothing they can do. the contact stated this is a safety issue because the radio could cause a fire. the failure mileage was 1,050. .Mileage was 1050 miles. Vehicle Identification Number (VIN):4T3ZA3BB0AU. Toyota Venza 2010 problem was reported in BUFORD, GA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Toyota Venza 2010 Service Brakes, Hydraulic

Toyota Venza 2010 Service Brakes, Hydraulic Review #10318630

TOYOTA VENZA 2010 car safety problem was reported on Jan 01, 1901.TOYOTA VENZA 2010, manufactured by TOYOTA MOTOR CORPORATION had a problem with SERVICE BRAKES, HYDRAULIC . 2010 toyota venza sudden accelerated*cw the consumer moved into the left turning lane at a four-way stop light to make a left turn. he slowed down to make the turn; and after making the turn, he then depressed the accelerator to proceed and the vehicle appeared to shift into neutral and the engine revved. the consumer then applied the brakes, but when he did they did not work and the abs light illuminated. the consumer panicked and then applied the accelerator again and the engine revved as if it were in neutral. the transmission did engage, but it felt as though it was slipping. the consumer also stated while backing out of the garage, he had trouble braking and the abs light illuminated. he had to apply the emergency brake to stop the vehicle.*jb.Toyota Venza 2010 problem was reported in UNKNOWN, DC. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Toyota Venza 2010 TRANSMISSION TYPE: AUTO.

Toyota Venza 2010 Service Brakes, Hydraulic Antilock Abs Warning Light

Toyota Venza 2010 Service Brakes, Hydraulic Antilock Abs Warning Light Review #10318630

TOYOTA VENZA 2010 car safety problem was reported on Jan 01, 1901.TOYOTA VENZA 2010, manufactured by TOYOTA MOTOR CORPORATION had a problem with SERVICE BRAKES, HYDRAULIC:ANTILOCK:ABS WARNING LIGHT . 2010 toyota venza sudden accelerated*cw the consumer moved into the left turning lane at a four-way stop light to make a left turn. he slowed down to make the turn; and after making the turn, he then depressed the accelerator to proceed and the vehicle appeared to shift into neutral and the engine revved. the consumer then applied the brakes, but when he did they did not work and the abs light illuminated. the consumer panicked and then applied the accelerator again and the engine revved as if it were in neutral. the transmission did engage, but it felt as though it was slipping. the consumer also stated while backing out of the garage, he had trouble braking and the abs light illuminated. he had to apply the emergency brake to stop the vehicle.*jb.Toyota Venza 2010 problem was reported in UNKNOWN, DC. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Toyota Venza 2010 TRANSMISSION TYPE: AUTO.

Toyota Venza 2010 Power Train Automatic Transmission

Toyota Venza 2010 Power Train Automatic Transmission Review #10318630

TOYOTA VENZA 2010 car safety problem was reported on Jan 01, 1901.TOYOTA VENZA 2010, manufactured by TOYOTA MOTOR CORPORATION had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . 2010 toyota venza sudden accelerated*cw the consumer moved into the left turning lane at a four-way stop light to make a left turn. he slowed down to make the turn; and after making the turn, he then depressed the accelerator to proceed and the vehicle appeared to shift into neutral and the engine revved. the consumer then applied the brakes, but when he did they did not work and the abs light illuminated. the consumer panicked and then applied the accelerator again and the engine revved as if it were in neutral. the transmission did engage, but it felt as though it was slipping. the consumer also stated while backing out of the garage, he had trouble braking and the abs light illuminated. he had to apply the emergency brake to stop the vehicle.*jb.Toyota Venza 2010 problem was reported in UNKNOWN, DC. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Toyota Venza 2010 TRANSMISSION TYPE: AUTO.

Toyota Venza 2010 Vehicle Speed Control

Toyota Venza 2010 Vehicle Speed Control Review #10319784

TOYOTA VENZA 2010 car safety problem was reported on Feb 27, 2010.TOYOTA VENZA 2010, manufactured by TOYOTA MOTOR CORPORATION had a problem with VEHICLE SPEED CONTROL . s10 appropriate handling re incident of sudden unintended acceleration fm owner of a 2010 toyota venza. *kb as the consumer was pulling into his driveway, he pushed the garage door opener button and suddenly the vehicle accelerated at a great speed, nearly crashing into the opening of the garage door. the vehicle was revving at 5,000 rpm's and he immediately put both feet on the brakes, jammed it into neutral, then reverse, then park. in park, the engine was still revving at a very high speed and so the consumer shut the engine off. he immediately looked down to see if the accelerator was stuck under the mat, and it was not. the gas pedal was no where near any floor mat and the vehicle was barely moving at the time. his foot was on the brake, not the accelerator and the vehicle was coasting into the garage. *jb.Vehicle Identification Number (VIN):4T3BK3BBXAU. Toyota Venza 2010 problem was reported in ALEXANDRIA, VA. Vehicle was purchased on Dec 23, 2009. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. DEALER'S NAME: USTINE TOYOTA . DEALER'S CITY: WOODBRIDGE . DEALER'S STATE CODE: VA.

Toyota Venza 2010 Structure Frame And Members

Toyota Venza 2010 Structure Frame And Members Review #10325077

TOYOTA VENZA 2010 car safety problem was reported on Apr 05, 2010.TOYOTA VENZA 2010, manufactured by TOYOTA MOTOR CORPORATION had a problem with STRUCTURE:FRAME AND MEMBERS . 2 weeks after buying a 2010 toyota venza the sunroof exploded with no reason. there was no scratch marks. it was something from inside out. in my opinion it was caused by the heat. the car was parked outside exposed to sun all day. toyota at first refused to pay the repair. but now they are replacing the sunroof but still without checking the reason for the incident. the noise was so strong and could have caused a major accident. *tr.Mileage was 3600 miles. Vehicle Identification Number (VIN):4T3BK3BB0AU. Toyota Venza 2010 problem was reported in WINTHROP, MA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 40 mph.

Toyota Venza 2010 Vehicle Speed Control

Toyota Venza 2010 Vehicle Speed Control Review #10325347

TOYOTA VENZA 2010 car safety problem was reported on Apr 10, 2010.TOYOTA VENZA 2010, manufactured by TOYOTA MOTOR CORPORATION had a problem with VEHICLE SPEED CONTROL . tl*the contact leased a 2009 toyota venza. the contact stated that while driving up a hill and attempting to brake, the vehicle continued to idle. she shifted into neutral and then park but the vehicle continued to idle. she had to press the smart button to turn off the vehicle; even after turning the vehicle off, it took several minutes to completely turn off. the vehicle was towed to an authorized dealership but the dealer could not produce a failure code. the dealer attributed the failure to driver error and the contact filed a complaint with the manufacturer. the current and failure mileages were 9,130. .Mileage was 9130 miles. Vehicle Identification Number (VIN):4T3BK11A89U. Toyota Venza 2010 problem was reported in TOLLAND, CT. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Toyota Venza 2010 Seat Belts

Toyota Venza 2010 Seat Belts Review #10336212

TOYOTA VENZA 2010 car safety problem was reported on Apr 28, 2010.TOYOTA VENZA 2010, manufactured by TOYOTA MOTOR CORPORATION had a problem with SEAT BELTS . seatbelt of 2010 toyota venza got caught around my 3 year old's neck. seatbelt would not give slack to remove and tightened as it retracted back into door. had to cut seatbelt in order to remove from child's neck. *tr.Mileage was 2000 miles. Vehicle Identification Number (VIN):4T3ZA3BB2AU. Toyota Venza 2010 problem was reported in POWHATAN, VA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 50 mph.

Toyota Venza 2010 Latches/locks/linkages

Toyota Venza 2010 Latches/locks/linkages Review #10341037

TOYOTA VENZA 2010 car safety problem was reported on June 27, 2010.TOYOTA VENZA 2010, manufactured by TOYOTA MOTOR CORPORATION had a problem with LATCHES/LOCKS/LINKAGES . toyota venza. the rear hatch is auto open/close. using the auto closing button on the dash of the vehicle, i initiated the close sequence. the rear hatch started to close normally, then it "slammed shut" with enough force to cause serious injury to anyone under the hatch. subsequent attempts at opening or closing the hatch resulted in a "stutter" effect which required me to close the hatch manually. i took the car to the dealer. they told me that i should not slam the hatch shut. i have never slammed the hatch, i always use the button on the dash or the key fob to open/ close the hatch. the rod is now bent that holds the hatch open. i am concerned that this will happen again when i am under the hatch. this could result in the loss of a limb if circumstances were correct. *tr.Mileage was 15000 miles. Vehicle Identification Number (VIN):4T3BK11A39U. Toyota Venza 2010 problem was reported in HURRICANE, UT. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Toyota Venza 2010 Structure Body

Toyota Venza 2010 Structure Body Review #10341037

TOYOTA VENZA 2010 car safety problem was reported on June 27, 2010.TOYOTA VENZA 2010, manufactured by TOYOTA MOTOR CORPORATION had a problem with STRUCTURE:BODY . toyota venza. the rear hatch is auto open/close. using the auto closing button on the dash of the vehicle, i initiated the close sequence. the rear hatch started to close normally, then it "slammed shut" with enough force to cause serious injury to anyone under the hatch. subsequent attempts at opening or closing the hatch resulted in a "stutter" effect which required me to close the hatch manually. i took the car to the dealer. they told me that i should not slam the hatch shut. i have never slammed the hatch, i always use the button on the dash or the key fob to open/ close the hatch. the rod is now bent that holds the hatch open. i am concerned that this will happen again when i am under the hatch. this could result in the loss of a limb if circumstances were correct. *tr.Mileage was 15000 miles. Vehicle Identification Number (VIN):4T3BK11A39U. Toyota Venza 2010 problem was reported in HURRICANE, UT. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Toyota Venza 2010 Vehicle Speed Control

Toyota Venza 2010 Vehicle Speed Control Review #10343384

TOYOTA VENZA 2010 car safety problem was reported on July 08, 2010.TOYOTA VENZA 2010, manufactured by TOYOTA MOTOR CORPORATION had a problem with VEHICLE SPEED CONTROL . while merging onto highway, accelerator became stuck and applying brake would not slow car. had to use emergency brake to slow vehicle and move to shoulder. *tr.Mileage was 4600 miles. Vehicle Identification Number (VIN):4T3ZK3BBXAU. Toyota Venza 2010 problem was reported in BRISTOL, TN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Toyota Venza 2010 Equipment Electrical Radio/tape Deck/cd Etc.

Toyota Venza 2010 Equipment Electrical Radio/tape Deck/cd Etc. Review #10347195

TOYOTA VENZA 2010 car safety problem was reported on July 26, 2010.TOYOTA VENZA 2010, manufactured by TOYOTA MOTOR CORPORATION had a problem with EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC. . tl* the contact owns a 2010 toyota venza. the contact stated when utilizing the radio during daylight, he was unable to see the stations due to limited illumination. the dealer advised he was unable to repair the vehicle. the manufacturer advised that if he would shut off the headlights, the radio lights would intensify. the vehicle was not repaired. the failure mileage was approximately 500 and the current mileage was approximately 700..Mileage was 500 miles. Vehicle Identification Number (VIN):4T3BA3BB9AU. Toyota Venza 2010 problem was reported in WEST SENECA, NY. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Toyota Venza 2010 Vehicle Speed Control

Toyota Venza 2010 Vehicle Speed Control Review #10353024

TOYOTA VENZA 2010 car safety problem was reported on Aug 17, 2010.TOYOTA VENZA 2010, manufactured by TOYOTA MOTOR CORPORATION had a problem with VEHICLE SPEED CONTROL . tl* the contact owns a 2010 toyota venza. the contact was driving 35 mph and attempting to pass another vehicle when her vehicle abnormally accelerated up to 55 mph. the contact attempted to brake but to no avail. she continued to apply abrupt pressure to the brakes as he maneuvered the vehicle from crashing. the contact was finally able to stop the vehicle. the dealer was unable to diagnose the failure and the vehicle was not repaired. the failure mileage was 11,700 and the current mileage was 11,819. updated 12/08/10. *lj the dealer advised the consumer to turn the vehicle off and the computer would reset itself. updated 12/13/10.Mileage was 11700 miles. Vehicle Identification Number (VIN):4T3BK3BB1AU. Toyota Venza 2010 problem was reported in SPRING LAKE, MI. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. VEHICLE SPEED: 35 mph.

Toyota Venza 2010 Vehicle Speed Control Review #10355779

TOYOTA VENZA 2010 car safety problem was reported on Sept 02, 2010.TOYOTA VENZA 2010, manufactured by TOYOTA MOTOR CORPORATION had a problem with VEHICLE SPEED CONTROL . i was driving a 2010 toyota venza, and was heavily pressing on the accelerator to gain speed to merge onto the express way, when my car kept accelerating at a high rate of speed, even after i took my foot away from the accelerator, approx 80 mph. the only thing i can compare it to, is it felt like the car's cruise control engaged on it's own and took over, but, kept accelerating. i put my foot on the brake but since the car was accelerating at a high rate of speed it was hard to keep it pressed, so i used both feet and all my leg strength and held the brake to the floor. it slowed the speed a little. it took approximately over a 1/4 mile, less then a 1/2 mile, before the accelerator pedal disengaged. i could not search for neutral immediately because i was watching traffic and maneuvering away from traffic entering and exiting the expressway. neutral on the venza is not a straight shift. you have to shift left and then up to find neutral. most cars is its a straight shift. *tr.Mileage was 7000 miles. Toyota Venza 2010 problem was reported in CINCINNATI, OH. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 80 mph.

Toyota Venza 2010 Electrical System

Toyota Venza 2010 Electrical System Review #10356322

TOYOTA VENZA 2010 car safety problem was reported on Sept 14, 2010.TOYOTA VENZA 2010, manufactured by TOYOTA MOTOR CORPORATION had a problem with ELECTRICAL SYSTEM . on september 14, 2010 my husband and i were driving our 2010 toyota venza on rte. 19s, in fayette, west virginia. we accelerated our venza to match ongoing traffic speeds, when the throttle stuck wide open and was increasing in speed. i stepped on the brakes, which failed to respond. i then checked the cruise control, to see if i had inadvertently engaged it, but i had not. i then started to pump the accelerator pedal with extreme force, and after numerous pumps, the throttle disengaged. as soon as it was safe, we pulled over to the side of the road, and called our dealership, courtesy toyota. they instructed us to call 1(800)331-4331 to report the incident and have the vehicle towed to the nearest toyota dealer. the car was brought to l&s toyota city in beckley, wv, where they proceeded to perform an unintended acceleration inspection, but the tech was unable to duplicate the issue. they performed the recall of the pedal reshaping, which we had not been previously notified of, and cleared the vehicle for release to us, at this time, and advised us that if this should reoccur, to shift the vehicle into neutral and slow the car by braking. the issue was not related to the pedal shape or the driver mat, and was in fact a computer anomaly. when the anomaly occurred, it froze the throttle and blocked the braking system.. further more, the idea to shift into neutral is unsafe, as there were no brakes to slow the vehicle to a stop and would continue to coast onward at an uncontrollable velocity. i expect that toyota company knows the defect lies in the computer control system, but may well believe the cost of claims and human lives is cheaper than fixing the very real problem. we purchased the toyota venza march 30, 2010 and were assured that, at that time, there were no recalls for it. the recall for our venza was issued march 16, 2010, which had not been performed on our car, and we had not been aware of one until our very traumatic experience occurred. *tr.Mileage was 4335 miles. Vehicle Identification Number (VIN):4T3BA3BB8AU. Toyota Venza 2010 problem was reported in BARRE, VT. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 65 mph.

Toyota Venza 2010 Vehicle Speed Control

Toyota Venza 2010 Vehicle Speed Control Review #10356322

TOYOTA VENZA 2010 car safety problem was reported on Sept 14, 2010.TOYOTA VENZA 2010, manufactured by TOYOTA MOTOR CORPORATION had a problem with VEHICLE SPEED CONTROL . on september 14, 2010 my husband and i were driving our 2010 toyota venza on rte. 19s, in fayette, west virginia. we accelerated our venza to match ongoing traffic speeds, when the throttle stuck wide open and was increasing in speed. i stepped on the brakes, which failed to respond. i then checked the cruise control, to see if i had inadvertently engaged it, but i had not. i then started to pump the accelerator pedal with extreme force, and after numerous pumps, the throttle disengaged. as soon as it was safe, we pulled over to the side of the road, and called our dealership, courtesy toyota. they instructed us to call 1(800)331-4331 to report the incident and have the vehicle towed to the nearest toyota dealer. the car was brought to l&s toyota city in beckley, wv, where they proceeded to perform an unintended acceleration inspection, but the tech was unable to duplicate the issue. they performed the recall of the pedal reshaping, which we had not been previously notified of, and cleared the vehicle for release to us, at this time, and advised us that if this should reoccur, to shift the vehicle into neutral and slow the car by braking. the issue was not related to the pedal shape or the driver mat, and was in fact a computer anomaly. when the anomaly occurred, it froze the throttle and blocked the braking system.. further more, the idea to shift into neutral is unsafe, as there were no brakes to slow the vehicle to a stop and would continue to coast onward at an uncontrollable velocity. i expect that toyota company knows the defect lies in the computer control system, but may well believe the cost of claims and human lives is cheaper than fixing the very real problem. we purchased the toyota venza march 30, 2010 and were assured that, at that time, there were no recalls for it. the recall for our venza was issued march 16, 2010, which had not been performed on our car, and we had not been aware of one until our very traumatic experience occurred. *tr.Mileage was 4335 miles. Vehicle Identification Number (VIN):4T3BA3BB8AU. Toyota Venza 2010 problem was reported in BARRE, VT. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 65 mph.

Toyota Venza 2010 Unknown Or Other

Toyota Venza 2010 Unknown Or Other Review #10362967

TOYOTA VENZA 2010 car safety problem was reported on Jan 30, 2010.TOYOTA VENZA 2010, manufactured by TOYOTA MOTOR CORPORATION had a problem with UNKNOWN OR OTHER . recall of the venza 2010. *tr.Vehicle was involved in a crash. 0 person(s) were injured. 0 person(s) died.Mileage was 7800 miles. Vehicle Identification Number (VIN):4T3ZA3BB2AU. Toyota Venza 2010 problem was reported in CABO ROJO, PR. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Toyota Venza 2010 Air Bags Frontal

Toyota Venza 2010 Air Bags Frontal Review #10365314

TOYOTA VENZA 2010 car safety problem was reported on Nov 10, 2010.TOYOTA VENZA 2010, manufactured by TOYOTA MOTOR CORPORATION had a problem with AIR BAGS:FRONTAL . i was the driver in a rear-end collision. i rear-ended a car going approx. 20-25 miles per hour and neither the passenger or drivers air bag deployed the car i struck was not moving. *tr.Vehicle was involved in a crash. Mileage was 8058 miles. Vehicle Identification Number (VIN):4T3BK3BB1AU. Toyota Venza 2010 problem was reported in PORTLAND, OR. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 20 mph.

Toyota Venza 2010 Structure Body Tailgate

Toyota Venza 2010 Structure Body Tailgate Review #10372399

TOYOTA VENZA 2010 car safety problem was reported on Dec 25, 2010.TOYOTA VENZA 2010, manufactured by TOYOTA MOTOR CORPORATION had a problem with STRUCTURE:BODY:TAILGATE . on my 2010 toyota venza, my wife injured her hand when she was closing the tailgate and the power motor which pull the tailgate shut trapped her hand under pressure between the tailgate and the floor of the car. she needed me to release the tailgate to free her hand. pressure injury to hand. *tr.Mileage was 17350 miles. Vehicle Identification Number (VIN):4T3ZA3BB8AU. Toyota Venza 2010 problem was reported in RIVERSIDE, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Toyota Venza 2010 drive type:FWD. VEHICLE SPEED: 0 mph.

Toyota Venza 2010 Latches/locks/linkages

Toyota Venza 2010 Latches/locks/linkages Review #10372399

TOYOTA VENZA 2010 car safety problem was reported on Dec 25, 2010.TOYOTA VENZA 2010, manufactured by TOYOTA MOTOR CORPORATION had a problem with LATCHES/LOCKS/LINKAGES . on my 2010 toyota venza, my wife injured her hand when she was closing the tailgate and the power motor which pull the tailgate shut trapped her hand under pressure between the tailgate and the floor of the car. she needed me to release the tailgate to free her hand. pressure injury to hand. *tr.Mileage was 17350 miles. Vehicle Identification Number (VIN):4T3ZA3BB8AU. Toyota Venza 2010 problem was reported in RIVERSIDE, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Toyota Venza 2010 drive type:FWD. VEHICLE SPEED: 0 mph.

Toyota Venza 2010 Latches/locks/linkages Review #10378842

TOYOTA VENZA 2010 car safety problem was reported on Jan 26, 2011.TOYOTA VENZA 2010, manufactured by TOYOTA MOTOR CORPORATION had a problem with LATCHES/LOCKS/LINKAGES . when manually closing the rear hatch door latch on the 2010 toyota venza it auto shuts and can cause objects, including my fingers, to be caught. it is equipped with the power close feature but when you close it manually, it overrides the sensors that would stop the closing mechanism. i recently installed a cargo mat and when manually shutting the rear hatch door, my fingers were caught between the door and the car hatch. it shut fully and caught all 8 fingers and there was no override mechanism to stop this from occurring. i had to call for assistance and my worry is that children or animals will easily be caught and severe injuries will be incurred. i reported this to my local toyota dealership and they are working on a resolution, but this seems to be a very problematic feature that should be researched and enhanced for safety reasons. *tr.Mileage was 303 miles. Vehicle Identification Number (VIN):4T3BK3BB7AU. Toyota Venza 2010 problem was reported in APOPKA, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Toyota Venza 2010 drive type:AWD. VEHICLE SPEED: 0 mph.

Toyota Venza 2010 Seats

Toyota Venza 2010 Seats Review #10383541

TOYOTA VENZA 2010 car safety problem was reported on Feb 01, 2011.TOYOTA VENZA 2010, manufactured by TOYOTA MOTOR CORPORATION had a problem with SEATS . the head rest on my vehicle pushes my neck forward into an extremely uncomfortable position. this cannot be adjusted. as a 5'4" female, i was having to seek medical treatment for neck and shoulder pain following long trips. i have reversed the head rest so that i can continue to drive my car. i am now concerned about the safety of this in the event of an accident (whiplash), but feel like i have no choice (severe neck pain was interfering with ability to turn my head while driving). i also had this problem on my previous car, a 2007 audi q7. i also reversed the head rest on that car. researching this on-line, this is an extremely common problem (and solution). car manufacturers should me made aware of this problem and questionable solution so that they can correct this..Vehicle Identification Number (VIN):4T3BK3BB3AU. Toyota Venza 2010 problem was reported in RESTON, VA. Vehicle was not using Cruise Control.

Toyota Venza 2010 Service Brakes, Hydraulic

Toyota Venza 2010 Service Brakes, Hydraulic Review #10396696

TOYOTA VENZA 2010 car safety problem was reported on Apr 04, 2011.TOYOTA VENZA 2010, manufactured by TOYOTA MOTOR CORPORATION had a problem with SERVICE BRAKES, HYDRAULIC . tl* the contact owns a 2010 toyota venza. the contact was driving 25 mph when the brakes failed. the brake pedal was depressed all the way to the floorboard with the illumination of the brake warning lamp. the vehicle was taken to the dealer who diagnosed that there was a problem with the pedal and the sensor communicating. the manufacturer was contacted who stated that they would contact the dealer and send an engineer to inspect the vehicle. the vehicle was not repaired. the failure and current mileage was 15,000. the consumer stated when she applied the brake pedal, the vehicle continued to move. the only way to bring the vehicle to a stop was to pump the brakes. the consumer stated the abs light and traction control lights illuminated. a message that read check cvs illuminated followed by another message that read braking system failure. the dealer stated the cause of the failure was due to a faulty pedal and sensor. the part finally arrived at the dealer two weeks later. however, the problem resurfaced again while the consumer was driving. updated 10/26/11.Mileage was 15000 miles. Vehicle Identification Number (VIN):4T3BK3BB0AU. Toyota Venza 2010 problem was reported in CHICAGO, IL. Original Owner. Vehicle was purchased on May 01, 2010. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. VEHICLE SPEED: 25 mph. DEALER'S NAME: TOYOTA OF WESTERN . DEALER'S TELEPHONE NUMBER: 773-884-7200 . DEALER'S CITY: CHICAGO . DEALER'S STATE CODE: IL. DEALER'S ZIPCODE: 60636 .

Toyota Venza 2010 Vehicle Speed Control Accelerator Pedal

Toyota Venza 2010 Vehicle Speed Control Accelerator Pedal Review #10396696

TOYOTA VENZA 2010 car safety problem was reported on Apr 04, 2011.TOYOTA VENZA 2010, manufactured by TOYOTA MOTOR CORPORATION had a problem with VEHICLE SPEED CONTROL:ACCELERATOR PEDAL . tl* the contact owns a 2010 toyota venza. the contact was driving 25 mph when the brakes failed. the brake pedal was depressed all the way to the floorboard with the illumination of the brake warning lamp. the vehicle was taken to the dealer who diagnosed that there was a problem with the pedal and the sensor communicating. the manufacturer was contacted who stated that they would contact the dealer and send an engineer to inspect the vehicle. the vehicle was not repaired. the failure and current mileage was 15,000. the consumer stated when she applied the brake pedal, the vehicle continued to move. the only way to bring the vehicle to a stop was to pump the brakes. the consumer stated the abs light and traction control lights illuminated. a message that read check cvs illuminated followed by another message that read braking system failure. the dealer stated the cause of the failure was due to a faulty pedal and sensor. the part finally arrived at the dealer two weeks later. however, the problem resurfaced again while the consumer was driving. updated 10/26/11.Mileage was 15000 miles. Vehicle Identification Number (VIN):4T3BK3BB0AU. Toyota Venza 2010 problem was reported in CHICAGO, IL. Original Owner. Vehicle was purchased on May 01, 2010. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. VEHICLE SPEED: 25 mph. DEALER'S NAME: TOYOTA OF WESTERN . DEALER'S TELEPHONE NUMBER: 773-884-7200 . DEALER'S CITY: CHICAGO . DEALER'S STATE CODE: IL. DEALER'S ZIPCODE: 60636 .

Toyota Venza 2010 Electronic Stability Control

Toyota Venza 2010 Electronic Stability Control Review #10413550

TOYOTA VENZA 2010 car safety problem was reported on Oct 12, 2010.TOYOTA VENZA 2010, manufactured by TOYOTA MOTOR CORPORATION had a problem with ELECTRONIC STABILITY CONTROL . tl* the contact owns a 2010 toyota venza. the contact stated that the vehicle stability control failed. the vehicle stability control system would engage when making turns and the vehicle would begin to pull off of the roadway. in order to correct the failure. the vehicle was taken to an authorized dealer on eight occasions, where they were unable to remedy the failure. the vehicle stability control sensor was reprogrammed and replaced, but the failure continued. the failure mileage was 1,400 and the current mileage was 14,000. updated 09/02/11*lj the consumer stated while driving, the vsc light illuminated and there was a dragging sound. the vehicle then pulled back in the opposite direction. at times, the vsc light would stay on for a while and then go off, other times it would stay on and the master warning light would illuminate. the abs would engage and the vehicle would over correct. updated 09/14/11*jb.Mileage was 1400 miles. Vehicle Identification Number (VIN):4T3BK3BB8AU. Toyota Venza 2010 problem was reported in CAPE FAIR, MO. Original Owner. Vehicle was purchased on Sept 20, 2010. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. VEHICLE SPEED: 45 mph. DEALER'S NAME: RELIABLE AUTOMOTIVE . DEALER'S CITY: SPRINGFIELD . DEALER'S STATE CODE: MO. DEALER'S ZIPCODE: 65809 .

Toyota Venza 2010 Power Train

Toyota Venza 2010 Power Train Review #10462955

TOYOTA VENZA 2010 car safety problem was reported on May 06, 2012.TOYOTA VENZA 2010, manufactured by TOYOTA MOTOR CORPORATION had a problem with POWER TRAIN . moved from flat indiana to hilly tennessee. pulled up to traffic light at the crest of a hill and the light was red. when the light turned green, i moved my foot from the brake to the accelerator, and in the time it took to do that, my vehicle was rolling backwards into the car behind me. there should be a mechanism in place that stops a vehicle from rolling backwards if it is in the 'drive' gear. thankfully the brakes were working quite well! i have to use both feet when stopping on hills- 1 on the brake and 1 on the accelerator - and 2 hands on the wheel - yikes! *tr.0 person(s) were injured. 0 person(s) died.Mileage was 23546 miles. Toyota Venza 2010 problem was reported in NASHVILLE, TN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Toyota Venza 2010 Structure Body

Toyota Venza 2010 Structure Body Review #10480156

TOYOTA VENZA 2010 car safety problem was reported on June 13, 2012.TOYOTA VENZA 2010, manufactured by TOYOTA MOTOR CORPORATION had a problem with STRUCTURE:BODY . i was driving at about 45 mph and windshield just cracked without anything being thrown at or any rock and debris hit. it is a about 4 feet crack. many glass experts agree that it is a material defect. talked to toyota delear and their position is it casued due to rock/debris hit. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 18000 miles. Vehicle Identification Number (VIN):4T3ZA3BB0AU. Toyota Venza 2010 problem was reported in CINCINNATI, OH. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 45 mph.

Toyota Venza 2010 Fuel/propulsion System

Toyota Venza 2010 Fuel/propulsion System Review #10486313

TOYOTA VENZA 2010 car safety problem was reported on Nov 21, 2012.TOYOTA VENZA 2010, manufactured by TOYOTA MOTOR CORPORATION had a problem with FUEL/PROPULSION SYSTEM . parked the car, locked it. about a minute later noticed smoke, then fire, very intense. the entire engine compartment was destroyed (radiator melted), front tire burned, and the fire damaged dashboard and interior as well. a car parked nearby was also scorched. *tr.Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Mileage was 17000 miles. Vehicle Identification Number (VIN):4T3BA3BB0AU. Toyota Venza 2010 problem was reported in LIBERTY, MO. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph.

Toyota Venza 2010 Engine And Engine Cooling

Toyota Venza 2010 Engine And Engine Cooling Review #10486313

TOYOTA VENZA 2010 car safety problem was reported on Nov 21, 2012.TOYOTA VENZA 2010, manufactured by TOYOTA MOTOR CORPORATION had a problem with ENGINE AND ENGINE COOLING . parked the car, locked it. about a minute later noticed smoke, then fire, very intense. the entire engine compartment was destroyed (radiator melted), front tire burned, and the fire damaged dashboard and interior as well. a car parked nearby was also scorched. *tr.Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Mileage was 17000 miles. Vehicle Identification Number (VIN):4T3BA3BB0AU. Toyota Venza 2010 problem was reported in LIBERTY, MO. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph.

Toyota Venza 2010 Electrical System

Toyota Venza 2010 Electrical System Review #10488668

TOYOTA VENZA 2010 car safety problem was reported on Oct 26, 2012.TOYOTA VENZA 2010, manufactured by TOYOTA MOTOR CORPORATION had a problem with ELECTRICAL SYSTEM . on october 20, 2012, my wife came home from work and stated that the brakes were not working properly (i.e. brake pedal dropped almost to the floor at times and brakes did not engage properly) on our 2010 toyota venza and that a message was illuminated in the center console computer system that stated, "brake system failure. contact your dealership immediately!". i contacted the dealership, informed them that the brakes were not working correctly and of the illuminated message, and was instructed to bring the vehicle into the dealership. i drove the vehicle into the dealership and on the way the brake system occasionally did not engage properly again (2nd time in same day). i managed to cautiously drive to the dealership and inform the dealership that i did not want this vehicle back until they were able to identify the cause of the problem and fix the problem. on the same day, i was informed that the mechanic flushed the brake system, took the vehicle for a test drive, and the vehicle's brake system failed for a third time. i observed the mechanic plug his diagnostic lap top into our vehicle and he was unable to find any stored errors in the computer software (despite the fact the vehicle's brake system failed 3 times on different occasions for 3 different people on the same day). the dealership was unable to identify the cause of the problem, so on october 22, 2012 they contacted toyota corporate's engineering department for guidance. corporate instructed the dealership to replace the master cylinder and the abs actuator. the dealership replaced these parts, conducted a test drive, and released this unsafe vehicle to my wife on october 23, 2012 never stating what caused the repeated brake failure. on october 26, 2012, the brake system again and was the cause of an accident. a formal complaint was filed with toyota corporation and they are denying liability. *tr.Vehicle was involved in a crash. 0 person(s) were injured. 0 person(s) died.Mileage was 32902 miles. Vehicle Identification Number (VIN):4T3ZK3BB3AU. Toyota Venza 2010 problem was reported in PHOENIX, AZ. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 6 mph.

Toyota Venza 2010 Service Brakes

Toyota Venza 2010 Service Brakes Review #10488668

TOYOTA VENZA 2010 car safety problem was reported on Oct 26, 2012.TOYOTA VENZA 2010, manufactured by TOYOTA MOTOR CORPORATION had a problem with SERVICE BRAKES . on october 20, 2012, my wife came home from work and stated that the brakes were not working properly (i.e. brake pedal dropped almost to the floor at times and brakes did not engage properly) on our 2010 toyota venza and that a message was illuminated in the center console computer system that stated, "brake system failure. contact your dealership immediately!". i contacted the dealership, informed them that the brakes were not working correctly and of the illuminated message, and was instructed to bring the vehicle into the dealership. i drove the vehicle into the dealership and on the way the brake system occasionally did not engage properly again (2nd time in same day). i managed to cautiously drive to the dealership and inform the dealership that i did not want this vehicle back until they were able to identify the cause of the problem and fix the problem. on the same day, i was informed that the mechanic flushed the brake system, took the vehicle for a test drive, and the vehicle's brake system failed for a third time. i observed the mechanic plug his diagnostic lap top into our vehicle and he was unable to find any stored errors in the computer software (despite the fact the vehicle's brake system failed 3 times on different occasions for 3 different people on the same day). the dealership was unable to identify the cause of the problem, so on october 22, 2012 they contacted toyota corporate's engineering department for guidance. corporate instructed the dealership to replace the master cylinder and the abs actuator. the dealership replaced these parts, conducted a test drive, and released this unsafe vehicle to my wife on october 23, 2012 never stating what caused the repeated brake failure. on october 26, 2012, the brake system again and was the cause of an accident. a formal complaint was filed with toyota corporation and they are denying liability. *tr.Vehicle was involved in a crash. 0 person(s) were injured. 0 person(s) died.Mileage was 32902 miles. Vehicle Identification Number (VIN):4T3ZK3BB3AU. Toyota Venza 2010 problem was reported in PHOENIX, AZ. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 6 mph.

Toyota Venza 2010 Equipment Adaptive

Toyota Venza 2010 Equipment Adaptive Review #10488668

TOYOTA VENZA 2010 car safety problem was reported on Oct 26, 2012.TOYOTA VENZA 2010, manufactured by TOYOTA MOTOR CORPORATION had a problem with EQUIPMENT ADAPTIVE . on october 20, 2012, my wife came home from work and stated that the brakes were not working properly (i.e. brake pedal dropped almost to the floor at times and brakes did not engage properly) on our 2010 toyota venza and that a message was illuminated in the center console computer system that stated, "brake system failure. contact your dealership immediately!". i contacted the dealership, informed them that the brakes were not working correctly and of the illuminated message, and was instructed to bring the vehicle into the dealership. i drove the vehicle into the dealership and on the way the brake system occasionally did not engage properly again (2nd time in same day). i managed to cautiously drive to the dealership and inform the dealership that i did not want this vehicle back until they were able to identify the cause of the problem and fix the problem. on the same day, i was informed that the mechanic flushed the brake system, took the vehicle for a test drive, and the vehicle's brake system failed for a third time. i observed the mechanic plug his diagnostic lap top into our vehicle and he was unable to find any stored errors in the computer software (despite the fact the vehicle's brake system failed 3 times on different occasions for 3 different people on the same day). the dealership was unable to identify the cause of the problem, so on october 22, 2012 they contacted toyota corporate's engineering department for guidance. corporate instructed the dealership to replace the master cylinder and the abs actuator. the dealership replaced these parts, conducted a test drive, and released this unsafe vehicle to my wife on october 23, 2012 never stating what caused the repeated brake failure. on october 26, 2012, the brake system again and was the cause of an accident. a formal complaint was filed with toyota corporation and they are denying liability. *tr.Vehicle was involved in a crash. 0 person(s) were injured. 0 person(s) died.Mileage was 32902 miles. Vehicle Identification Number (VIN):4T3ZK3BB3AU. Toyota Venza 2010 problem was reported in PHOENIX, AZ. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 6 mph.

Toyota Venza 2010 Service Brakes

Toyota Venza 2010 Service Brakes Review #10499550

TOYOTA VENZA 2010 car safety problem was reported on Feb 15, 2013.TOYOTA VENZA 2010, manufactured by TOYOTA MOTOR CORPORATION had a problem with SERVICE BRAKES . tl* the contact owns a 2010 toyota venza. the contact stated that while stopped at a traffic stop, the brakes failed, causing the vehicle to move forward. in addition, while the brake pedal was applied firmly the vehicle the crashed into another vehicle. no one was injured. the contact took the vehicle to a dealer for a diagnostic test. the dealer could not find an issue with the braking system. the contact did not have any repairs performed on the vehicle. the failure mileage was 26,000..Vehicle was involved in a crash. 0 person(s) were injured. 0 person(s) died.Mileage was 26000 miles. Vehicle Identification Number (VIN):4T3ZK3BB5AU. Toyota Venza 2010 problem was reported in RESTON, VA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Toyota Venza 2010 Air Bags

Toyota Venza 2010 Air Bags Review #10504412

TOYOTA VENZA 2010 car safety problem was reported on Mar 02, 2013.TOYOTA VENZA 2010, manufactured by TOYOTA MOTOR CORPORATION had a problem with AIR BAGS . tl* the contact owns a 2010 toyota venza. the contact stated that while driving approximately 10 mph, another vehicle crashed into the front passenger side of the vehicle. the contact was forced into a cement pole. the air bags failed to deploy. the police were contacted and a report was filed. the driver sustained injuries to the chest, right knee, left thigh, stomach and severe blood loss. the front passenger sustained injuries to the back, neck, and both knees. two of the rear passengers sustained a broken collar bone, back, right leg and neck injuries. the vehicle was later towed to an independent mechanic and was deemed destroyed. the manufacturer was contacted and offered no assistance to the contact. the failure and current mileage was approximately 40,000. the vin was unavailable. *tr.Vehicle was involved in a crash. 4 person(s) were injured. 0 person(s) died.Mileage was 40000 miles. Toyota Venza 2010 problem was reported in LAKELAND, FL. Accident was reported to Police. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 10 mph.

Toyota Venza 2010 Structure Body

Toyota Venza 2010 Structure Body Review #10509615

TOYOTA VENZA 2010 car safety problem was reported on Apr 25, 2013.TOYOTA VENZA 2010, manufactured by TOYOTA MOTOR CORPORATION had a problem with STRUCTURE:BODY . while entering the interstate i was approaching about 60 mph when all of a sudden i hear a very loud pop! i was startled thinking someone had shot a gun! it caused me to slow down and to almost be rear ended. i looked up to find my sunroof had exploded for no apparent reason. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 32000 miles. Vehicle Identification Number (VIN):4T3ZA3BB5AU. Toyota Venza 2010 problem was reported in INDIANAPOLIS, IN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 60 mph.

Toyota Venza 2010 Visibility/wiper

Toyota Venza 2010 Visibility/wiper Review #10550931

TOYOTA VENZA 2010 car safety problem was reported on Oct 21, 2013.TOYOTA VENZA 2010, manufactured by TOYOTA MOTOR CORPORATION had a problem with VISIBILITY/WIPER . driver side sun visor hangs and wont go back up. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 70000 miles. Toyota Venza 2010 problem was reported in WINTER HAVEN, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Toyota Venza 2010 Power Train

Toyota Venza 2010 Power Train Review #10566197

TOYOTA VENZA 2010 car safety problem was reported on Feb 18, 2014.TOYOTA VENZA 2010, manufactured by Toyota Motor Corporation had a problem with POWER TRAIN . car was parked in driveway which is fairly level ground. vehicle in park and locked. it rolled down hill and hit gate. toyota has agreed to do a edr but not until march 11. i want to know if anyone else has reported this issue. *tr.Vehicle was involved in a crash. 0 person(s) were injured. 0 person(s) died.Mileage was 23500 miles. Vehicle Identification Number (VIN):4T3BK3BB3AU. Toyota Venza 2010 problem was reported in LEXINGTON, KY. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 5 mph.

Toyota Venza 2010 Visibility Sun Roof Assembly

Toyota Venza 2010 Visibility Sun Roof Assembly Review #10573155

TOYOTA VENZA 2010 car safety problem was reported on Mar 13, 2014.TOYOTA VENZA 2010, manufactured by Toyota Motor Corporation had a problem with VISIBILITY:SUN ROOF ASSEMBLY . i was driving my vehicle to work with the sunroof closed and the sun visor open when suddenly i heard a loud bang, like a gunshot, and my sunroof shattered. it scared me and nearly caused me to run off the road; thankfully there were no other cars anywhere near me. i am certain it wasn't hit by a rock or something as there were no cars in front of me and also i wasn't near any overpasses. upon research, this issue seems to be common with toyota, so i contacted toyota motor corporation through their customer service line. after a couple follow up calls, toyota basically said it was not their problem and nothing they could do. i'm lucky this didn't cut me up or cause me to crash. hopefully this doesn't keep happening. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 50985 miles. Vehicle Identification Number (VIN):4T3BK3BB5AU. Toyota Venza 2010 problem was reported in COTTAGE GROVE, MN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 60 mph.

Toyota Venza 2010 Structure Body

Toyota Venza 2010 Structure Body Review #10573155

TOYOTA VENZA 2010 car safety problem was reported on Mar 13, 2014.TOYOTA VENZA 2010, manufactured by Toyota Motor Corporation had a problem with STRUCTURE:BODY . i was driving my vehicle to work with the sunroof closed and the sun visor open when suddenly i heard a loud bang, like a gunshot, and my sunroof shattered. it scared me and nearly caused me to run off the road; thankfully there were no other cars anywhere near me. i am certain it wasn't hit by a rock or something as there were no cars in front of me and also i wasn't near any overpasses. upon research, this issue seems to be common with toyota, so i contacted toyota motor corporation through their customer service line. after a couple follow up calls, toyota basically said it was not their problem and nothing they could do. i'm lucky this didn't cut me up or cause me to crash. hopefully this doesn't keep happening. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 50985 miles. Vehicle Identification Number (VIN):4T3BK3BB5AU. Toyota Venza 2010 problem was reported in COTTAGE GROVE, MN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 60 mph.

Toyota Venza 2010 Service Brakes

Toyota Venza 2010 Service Brakes Review #10588239

TOYOTA VENZA 2010 car safety problem was reported on May 12, 2014.TOYOTA VENZA 2010, manufactured by Toyota Motor Corporation had a problem with SERVICE BRAKES . it was around 10:30am and i was on my way to work. driving on a local road and the brake light, abs and stability lights came on. i pulled over and turned off the car. pressed on the parking brake released it and then re-started the car and all the warning lights went off. about 5 miles later the lights came on again and now they light up as soon as the car is started. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 51000 miles. Vehicle Identification Number (VIN):4T3BK3BBXA. Toyota Venza 2010 problem was reported in PINE BROOK, NJ. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 25 mph.

Toyota Venza 2010 Electronic Stability Control

Toyota Venza 2010 Electronic Stability Control Review #10588239

TOYOTA VENZA 2010 car safety problem was reported on May 12, 2014.TOYOTA VENZA 2010, manufactured by Toyota Motor Corporation had a problem with ELECTRONIC STABILITY CONTROL . it was around 10:30am and i was on my way to work. driving on a local road and the brake light, abs and stability lights came on. i pulled over and turned off the car. pressed on the parking brake released it and then re-started the car and all the warning lights went off. about 5 miles later the lights came on again and now they light up as soon as the car is started. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 51000 miles. Vehicle Identification Number (VIN):4T3BK3BBXA. Toyota Venza 2010 problem was reported in PINE BROOK, NJ. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 25 mph.

Toyota Venza 2010 Steering Column

Toyota Venza 2010 Steering Column Review #10588421

TOYOTA VENZA 2010 car safety problem was reported on July 04, 2012.TOYOTA VENZA 2010, manufactured by Toyota Motor Corporation had a problem with STEERING:COLUMN . tl* the contact owns 2010 toyota venza. the contact stated that a rattling noise was coming from the steering column while driving at various speeds. the vehicle was taken to a independent mechanic and the technician diagnosed that the steering column needed to be replaced. no repairs were made to the vehicle. the manufacture was made aware of the failure. the failure mileage was 37,000 and the current mileage was 64,000. .0 person(s) were injured. 0 person(s) died.Mileage was 37000 miles. Vehicle Identification Number (VIN):4T3BK3BB3AU. Toyota Venza 2010 problem was reported in WESTPORT, MA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Toyota Venza 2010 Steering Review #10588421

TOYOTA VENZA 2010 car safety problem was reported on July 04, 2012.TOYOTA VENZA 2010, manufactured by Toyota Motor Corporation had a problem with STEERING . tl* the contact owns 2010 toyota venza. the contact stated that a rattling noise was coming from the steering column while driving at various speeds. the vehicle was taken to a independent mechanic and the technician diagnosed that the steering column needed to be replaced. no repairs were made to the vehicle. the manufacture was made aware of the failure. the failure mileage was 37,000 and the current mileage was 64,000. .0 person(s) were injured. 0 person(s) died.Mileage was 37000 miles. Vehicle Identification Number (VIN):4T3BK3BB3AU. Toyota Venza 2010 problem was reported in WESTPORT, MA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Toyota Venza 2010 Service Brakes

Toyota Venza 2010 Service Brakes Review #10627641

TOYOTA VENZA 2010 car safety problem was reported on July 13, 2014.TOYOTA VENZA 2010, manufactured by Toyota Motor Corporation had a problem with SERVICE BRAKES . i was driving 35 mph (the speed limit) and was approximately 6-8 car lengths from two cars stopped at a green light waiting for oncoming traffic to clear so they could turn left. i took my foot off the accelerator and onto the brakes but they didn't engage. i then slammed on the brakes. i heard the pulsation as if the abs brakes were trying to work but they did not engage. i then checked to see if the lane to my right was clear. when i saw that it was, i tried to steer into it but my car would not steer and i crashed into the second stopped car and it in turn hit the car in front of it. the front passenger in each of those two cars went to get checked out at the hospital. i was 33 weeks pregnant at the time and spent the night in the hospital to monitor my baby..Vehicle was involved in a crash. 3 person(s) were injured. 0 person(s) died.Mileage was 64000 miles. Vehicle Identification Number (VIN):4T3BK3BB0AU. Toyota Venza 2010 problem was reported in GROVE CITY, OH. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 35 mph.

Air Bags 1 Review(s)

Air Bags Frontal 1 Review(s)

Electrical System 2 Review(s)

Electronic Stability Control 2 Review(s)

Engine And Engine Cooling 1 Review(s)

Equipment Adaptive 1 Review(s)

Equipment Electrical Radio/tape Deck/cd Etc. 2 Review(s)

Fuel System, Gasoline 1 Review(s)

Fuel/propulsion System 1 Review(s)

Latches/locks/linkages 3 Review(s)

Power Train 2 Review(s)

Power Train Automatic Transmission 1 Review(s)

Seat Belts 1 Review(s)

Seats 1 Review(s)

Service Brakes 4 Review(s)

Service Brakes, Hydraulic 3 Review(s)

Service Brakes, Hydraulic Antilock Abs Warning Light 1 Review(s)

Steering 1 Review(s)

Steering Column 1 Review(s)

Structure Body 4 Review(s)

Structure Body Tailgate 1 Review(s)

Structure Frame And Members 1 Review(s)

Unknown Or Other 1 Review(s)

Vehicle Speed Control 9 Review(s)

Vehicle Speed Control Accelerator Pedal 1 Review(s)

Visibility/wiper 1 Review(s)

Visibility Sun Roof Assembly 1 Review(s)