view Plymouth Suspension Front Control Arm problem reportsPlymouth Suspension Front Control Arm

Car-and-Safety.com | PLYMOUTH>PLYMOUTH Suspension Front Control Arm



Plymouth Suspension Front Control Arm Reports


15 Mar

PLYMOUTH GRAND VOYAGER 2000 Vehicle Was Traveling At Approximately 5 mph when loss of steering occurred. consumer crashed into another vehicle. upon examination,
PLYMOUTH BREEZE 1998 Front Control Arm Plastic Bushing has popped out of place, causing noise to occur when making left and right hand turns. *jg

PLYMOUTH BREEZE 1996 Consume Took Car In for a tire rotation, ball joint and covers were bent. consumer start hearing a scraping noise.
PLYMOUTH BREEZE 1998 Passenger's /front Control Arm Was bent. while driving and making a right turn, vehicle hit the curb. repairs
PLYMOUTH NEON 1998 While Driivng The Vehicle A popping sound came from the right front end of vehicle. the driver would also get a vibration when
PLYMOUTH NEON 1995 Had Started To Notice That suspension control arm was getting rough. felt like no shocks on vehicles. had mechanic check vehicle &
PLYMOUTH BREEZE 1996 Consumer Stated That After The vehicle has been repaired they are still having the same problems with there control arm and ball joints and is
PLYMOUTH GRAND VOYAGER 1996 Air Bag Light Is On, the horn does not work and the speed control is inoperative. there are chrysler service bulletins on


View related Plymouth problems


PLYMOUTH BREEZE
PLYMOUTH GRAND VOYAGER
PLYMOUTH NEON

Discuss Plymouth Suspension Front Control Arm Problems