Car-and-Safety.com

Mercedes Benz 300 1993 Safety Reports and Reviews



Mercedes Benz 300 1993 Reviews



Mercedes Benz 300 1993 Steering Wheel And Handle Bar

Mercedes Benz 300 1993 Steering Wheel And Handle Bar Review #960942

MERCEDES BENZ 300 1993 car safety problem was reported on Nov 02, 1994.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with STEERING:WHEEL AND HANDLE BAR . shaking developes in the steering wheel while driving. tt.0 person(s) were injured. 0 person(s) died.Mercedes Benz 300 1993 problem was reported in ABILENE, TX. Vehicle was not using Cruise Control.

Mercedes Benz 300 1993 Air Bags Frontal

Mercedes Benz 300 1993 Air Bags Frontal Review #967720

MERCEDES BENZ 300 1993 car safety problem was reported on Apr 21, 1995.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with AIR BAGS:FRONTAL . had a frontal collision, driver side air bag did not deploy. tt.Vehicle was involved in a crash. 1 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):WDBEA28E7PB. Mercedes Benz 300 1993 problem was reported in CORAL GABLES, FL. Vehicle was not using Cruise Control.

Mercedes Benz 300 1993 Air Bags Frontal Review #976496

MERCEDES BENZ 300 1993 car safety problem was reported on .MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with AIR BAGS:FRONTAL . upon impact, during frontal crash, at approx. 50mph, 11:00 on front bumper, driver's airbag failed to deploy, passenger's side airbag did deploy. tt.Vehicle was involved in a crash. 1 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):WDBEA32E1PB. Mercedes Benz 300 1993 problem was reported in LAKEFOREST, CA. Vehicle was not using Cruise Control.

Mercedes Benz 300 1993 Steering Wheel And Handle Bar

Mercedes Benz 300 1993 Steering Wheel And Handle Bar Review #484810

MERCEDES BENZ 300 1993 car safety problem was reported on July 30, 1995.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with STEERING:WHEEL AND HANDLE BAR . noisy steering wheel..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):WDBEA28E0PB. Mercedes Benz 300 1993 problem was reported in LANHAM SEA, MD. Vehicle was not using Cruise Control.

Mercedes Benz 300 1993 Visibility Defroster/defogger System

Mercedes Benz 300 1993 Visibility Defroster/defogger System Review #484810

MERCEDES BENZ 300 1993 car safety problem was reported on July 30, 1995.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with VISIBILITY:DEFROSTER/DEFOGGER SYSTEM . defroster malfunctioned..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):WDBEA28E0PB. Mercedes Benz 300 1993 problem was reported in LANHAM SEA, MD. Vehicle was not using Cruise Control.

Mercedes Benz 300 1993 Electrical System

Mercedes Benz 300 1993 Electrical System Review #484810

MERCEDES BENZ 300 1993 car safety problem was reported on July 30, 1995.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with ELECTRICAL SYSTEM . electrical failure, causing windshield wipers /front seat power adjustment to malfunction. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):WDBEA28E0PB. Mercedes Benz 300 1993 problem was reported in LANHAM SEA, MD. Vehicle was not using Cruise Control.

Mercedes Benz 300 1993 Service Brakes, Hydraulic Foundation Components

Mercedes Benz 300 1993 Service Brakes, Hydraulic Foundation Components Review #484810

MERCEDES BENZ 300 1993 car safety problem was reported on July 30, 1995.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS . brakes failed, resulting in extended stopping distance..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):WDBEA28E0PB. Mercedes Benz 300 1993 problem was reported in LANHAM SEA, MD. Vehicle was not using Cruise Control.

Mercedes Benz 300 1993 Vehicle Speed Control

Mercedes Benz 300 1993 Vehicle Speed Control Review #801199

MERCEDES BENZ 300 1993 car safety problem was reported on Aug 22, 1993.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with VEHICLE SPEED CONTROL . during operation the car experiences sudden acceleration. problem occurs only when starting from a complete stop.*ak.Mercedes Benz 300 1993 problem was reported in ST. PETERSBURG, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Mercedes Benz 300 1993 TRANSMISSION TYPE: AUTO.

Mercedes Benz 300 1993 Tires

Mercedes Benz 300 1993 Tires Review #515132

MERCEDES BENZ 300 1993 car safety problem was reported on .MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with TIRES . michelin tires wore out prematurely. (224/60r26).0 person(s) died.Mercedes Benz 300 1993 problem was reported in LAFAYETTE, PA. Vehicle was not using Cruise Control.

Mercedes Benz 300 1993 Engine And Engine Cooling Engine

Mercedes Benz 300 1993 Engine And Engine Cooling Engine Review #507978

MERCEDES BENZ 300 1993 car safety problem was reported on .MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with ENGINE AND ENGINE COOLING:ENGINE . head gasket failed..Mercedes Benz 300 1993 problem was reported in LAFAYETTE, PA. Vehicle was not using Cruise Control.

Mercedes Benz 300 1993 Tires

Mercedes Benz 300 1993 Tires Review #515132

MERCEDES BENZ 300 1993 car safety problem was reported on Jan 20, 1997.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with TIRES . michelin tires #224/60 r26 97v, worn unevenly and excessively..Mercedes Benz 300 1993 problem was reported in LAFAYETTE, PA. Vehicle was not using Cruise Control.

Mercedes Benz 300 1993 Engine And Engine Cooling Cooling System Fan

Mercedes Benz 300 1993 Engine And Engine Cooling Cooling System Fan Review #508117

MERCEDES BENZ 300 1993 car safety problem was reported on .MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN . fan belt was on the pully incorrectly causing it to rub against the water hose resulting in a hole..Vehicle Identification Number (VIN):1DBGB34EOPA. Mercedes Benz 300 1993 problem was reported in LAFAYETTE, PA. Vehicle was not using Cruise Control.

Mercedes Benz 300 1993 Engine And Engine Cooling Engine

Mercedes Benz 300 1993 Engine And Engine Cooling Engine Review #853295

MERCEDES BENZ 300 1993 car safety problem was reported on July 21, 1999.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with ENGINE AND ENGINE COOLING:ENGINE . engine cylinder head blew out, causing cooling leakage. dealer has replaced engine cylinder head. also replaced cruise control and ignition. *ak.Vehicle Identification Number (VIN):WDBEA28E4PB. Mercedes Benz 300 1993 problem was reported in NEW ORLEANS, LA. Original Owner. Vehicle was purchased on Aug 01, 1993. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Mercedes Benz 300 1993 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Mercedes Benz 300 1993 TRANSMISSION TYPE: AUTO.

Mercedes Benz 300 1993 Vehicle Speed Control

Mercedes Benz 300 1993 Vehicle Speed Control Review #853295

MERCEDES BENZ 300 1993 car safety problem was reported on July 21, 1999.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with VEHICLE SPEED CONTROL . engine cylinder head blew out, causing cooling leakage. dealer has replaced engine cylinder head. also replaced cruise control and ignition. *ak.Vehicle Identification Number (VIN):WDBEA28E4PB. Mercedes Benz 300 1993 problem was reported in NEW ORLEANS, LA. Original Owner. Vehicle was purchased on Aug 01, 1993. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Mercedes Benz 300 1993 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Mercedes Benz 300 1993 TRANSMISSION TYPE: AUTO.

Mercedes Benz 300 1993 Electrical System Ignition

Mercedes Benz 300 1993 Electrical System Ignition Review #853295

MERCEDES BENZ 300 1993 car safety problem was reported on July 21, 1999.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with ELECTRICAL SYSTEM:IGNITION . engine cylinder head blew out, causing cooling leakage. dealer has replaced engine cylinder head. also replaced cruise control and ignition. *ak.Vehicle Identification Number (VIN):WDBEA28E4PB. Mercedes Benz 300 1993 problem was reported in NEW ORLEANS, LA. Original Owner. Vehicle was purchased on Aug 01, 1993. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Mercedes Benz 300 1993 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Mercedes Benz 300 1993 TRANSMISSION TYPE: AUTO.

Mercedes Benz 300 1993 Electrical System Wiring Front Underhood

Mercedes Benz 300 1993 Electrical System Wiring Front Underhood Review #720299

MERCEDES BENZ 300 1993 car safety problem was reported on Feb 15, 2000.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with ELECTRICAL SYSTEM:WIRING:FRONT UNDERHOOD . no summary listed for above vehicle. *ak.Vehicle Identification Number (VIN):WDBEA32E2PB. Mercedes Benz 300 1993 problem was reported in BEDFORD, TX. Original Owner. Vehicle was purchased on Mar 01, 1993. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Mercedes Benz 300 1993 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS.

Mercedes Benz 300 1993 Seat Belts Front Anchorage

Mercedes Benz 300 1993 Seat Belts Front Anchorage Review #551428

MERCEDES BENZ 300 1993 car safety problem was reported on .MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with SEAT BELTS:FRONT:ANCHORAGE . seat belt came apart due to loss of spring. yh.Vehicle Identification Number (VIN):WDBEA32EXPB. Mercedes Benz 300 1993 problem was reported in PALO ALTO, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Mercedes Benz 300 1993 drive type:RWD. FUEL TYPE: GAS. Mercedes Benz 300 1993 TRANSMISSION TYPE: AUTO.

Mercedes Benz 300 1993 Engine And Engine Cooling Engine

Mercedes Benz 300 1993 Engine And Engine Cooling Engine Review #726117

MERCEDES BENZ 300 1993 car safety problem was reported on July 05, 2000.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with ENGINE AND ENGINE COOLING:ENGINE . engine head gasket failed. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):WDBEA32E6PB. Mercedes Benz 300 1993 problem was reported in LAGUNA NIGUEL, CA. Original Owner. Vehicle was purchased on Dec 01, 1992. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Mercedes Benz 300 1993 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph.

Mercedes Benz 300 1993 Seat Belts Front Retractor

Mercedes Benz 300 1993 Seat Belts Front Retractor Review #875955

MERCEDES BENZ 300 1993 car safety problem was reported on Nov 01, 1999.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with SEAT BELTS:FRONT:RETRACTOR . driver's restraint does not retract when driver leans forward and back. dealer will be notified. *ak when making a u-turn, the engine dies without any apparent reason. *yh.Vehicle Identification Number (VIN):WDBGA32E2PA. Mercedes Benz 300 1993 problem was reported in PASSEDENA, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.FUEL TYPE: GAS. Mercedes Benz 300 1993 TRANSMISSION TYPE: AUTO.

Mercedes Benz 300 1993 Engine And Engine Cooling Engine Gasoline

Mercedes Benz 300 1993 Engine And Engine Cooling Engine Gasoline Review #875955

MERCEDES BENZ 300 1993 car safety problem was reported on Nov 01, 1999.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with ENGINE AND ENGINE COOLING:ENGINE:GASOLINE . driver's restraint does not retract when driver leans forward and back. dealer will be notified. *ak when making a u-turn, the engine dies without any apparent reason. *yh.Vehicle Identification Number (VIN):WDBGA32E2PA. Mercedes Benz 300 1993 problem was reported in PASSEDENA, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.FUEL TYPE: GAS. Mercedes Benz 300 1993 TRANSMISSION TYPE: AUTO.

Mercedes Benz 300 1993 Steering Gear Box Shaft Sector

Mercedes Benz 300 1993 Steering Gear Box Shaft Sector Review #738708

MERCEDES BENZ 300 1993 car safety problem was reported on Dec 11, 2000.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with STEERING:GEAR BOX:SHAFT SECTOR . vehicle was in accident 9-2-00. dealer told insurance company (chubb) that there was $5000 damage. after contacting ralph koos at mercedes usa, he found thousands of dollars in additional repairs. concours was reimbursed for more than the car was worth. however mercedes assured us that the car was completely fixed and safe to drive. a few weeks later, the right side collapsed, made noises and swayed side to side so much the vechile felt like it was going to flip over. the vehicle has either a manufacturers defect or the repairs were not complete from the accident..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):WDBED30E9PB. Mercedes Benz 300 1993 problem was reported in BROOKFIELD, WI. Vehicle was purchased on Oct 01, 1998. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Mercedes Benz 300 1993 drive type:4WD. FUEL TYPE: GAS. VEHICLE SPEED: 35 mph.

Mercedes Benz 300 1993 Structure Frame And Members

Mercedes Benz 300 1993 Structure Frame And Members Review #738708

MERCEDES BENZ 300 1993 car safety problem was reported on Dec 11, 2000.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with STRUCTURE:FRAME AND MEMBERS . vehicle was in accident 9-2-00. dealer told insurance company (chubb) that there was $5000 damage. after contacting ralph koos at mercedes usa, he found thousands of dollars in additional repairs. concours was reimbursed for more than the car was worth. however mercedes assured us that the car was completely fixed and safe to drive. a few weeks later, the right side collapsed, made noises and swayed side to side so much the vechile felt like it was going to flip over. the vehicle has either a manufacturers defect or the repairs were not complete from the accident..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):WDBED30E9PB. Mercedes Benz 300 1993 problem was reported in BROOKFIELD, WI. Vehicle was purchased on Oct 01, 1998. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Mercedes Benz 300 1993 drive type:4WD. FUEL TYPE: GAS. VEHICLE SPEED: 35 mph.

Mercedes Benz 300 1993 Engine And Engine Cooling Engine

Mercedes Benz 300 1993 Engine And Engine Cooling Engine Review #895235

MERCEDES BENZ 300 1993 car safety problem was reported on June 23, 2001.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with ENGINE AND ENGINE COOLING:ENGINE . timing chain broke, causing vehicle to stall. *ak.Vehicle Identification Number (VIN):ADD. Mercedes Benz 300 1993 problem was reported in GLEN COVE, NY. Original Owner. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Mercedes Benz 300 1993 TRANSMISSION TYPE: AUTO.

Mercedes Benz 300 1993 Equipment Electrical Air Conditioner

Mercedes Benz 300 1993 Equipment Electrical Air Conditioner Review #752048

MERCEDES BENZ 300 1993 car safety problem was reported on May 17, 2001.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with EQUIPMENT:ELECTRICAL:AIR CONDITIONER . a/c evaporator leaks which prevents cooling of the vehicle. r134a stop leak applied however it did not seal leak.*ak.Vehicle Identification Number (VIN):WDBGA32EXPA. Mercedes Benz 300 1993 problem was reported in HAZELWOOD, MO. Vehicle was purchased on Feb 01, 2000. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Mercedes Benz 300 1993 drive type:FWD. FUEL TYPE: GAS.

Mercedes Benz 300 1993 Electrical System Wiring

Mercedes Benz 300 1993 Electrical System Wiring Review #759679

MERCEDES BENZ 300 1993 car safety problem was reported on Mar 22, 2002.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with ELECTRICAL SYSTEM:WIRING . my research indicate that this engine wiring harness problem is an ongoing issue for many mercedes benz, 300 e, and 300se cars with the twin cam engines made between the years of 1993-1995. not only i am unable to have routine maintenance done, but i am told by the repair facility that this presents a safety problem, because there is a risk of fire associated with this defect..Vehicle Identification Number (VIN):WDBEA28E4PC. Mercedes Benz 300 1993 problem was reported in CAPE MAY COURT HOUSE, NJ. Vehicle was purchased on Mar 01, 2000. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Mercedes Benz 300 1993 drive type:FWD. FUEL TYPE: GAS.

Mercedes Benz 300 1993 Electrical System Wiring Front Underhood

Mercedes Benz 300 1993 Electrical System Wiring Front Underhood Review #767819

MERCEDES BENZ 300 1993 car safety problem was reported on Nov 26, 2001.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with ELECTRICAL SYSTEM:WIRING:FRONT UNDERHOOD . i talked to several machanics and to dealer they told me that it is a common problem in this vehicle i am very suprised that it has never been recalled. it also causes the car to stall during take off and on the road while driving at highway speeds it will stall.something must be done before persons are killed or injured. ts.Vehicle was on fire. 1 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):WDBEA28E3PB. Mercedes Benz 300 1993 problem was reported in PORT ALLEN, LA. Vehicle was purchased on Nov 01, 2001. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Mercedes Benz 300 1993 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph.

Mercedes Benz 300 1993 Electrical System Wiring Front Underhood Review #10003489

MERCEDES BENZ 300 1993 car safety problem was reported on Jan 23, 2003.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with ELECTRICAL SYSTEM:WIRING:FRONT UNDERHOOD . mercedes 1993 300e wire harness engine wiring harness.(300e mercedes) cracked and brittle. made with very poor materialsmade. this is a known problem with this year and make of mercedes. if you own one of these cars it is well known you will need to replace your harness. mercedes knows of this problem and does nothing to help. i have a problem when my car will not pass smog until i replace mine. i think mercedes should a the least replace the part at no charge. thousands of these cars were made and at a cost of over $500.00 per harness this is a lot of money from consumers. if you can help great. thanks in advance for your help. dave myers.Mileage was 103756 miles. Vehicle Identification Number (VIN):WDBEA32E6PB. Mercedes Benz 300 1993 problem was reported in SAN JOSE, CA. Vehicle was purchased on Aug 12, 2002. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Mercedes Benz 300 1993 drive type:RWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mercedes Benz 300 1993 TRANSMISSION TYPE: AUTO. DEALER'S NAME: AUTO CITY . DEALER'S CITY: SAN JOSE . DEALER'S STATE CODE: CA.

Mercedes Benz 300 1993 Electrical System Wiring Front Underhood Review #10003491

MERCEDES BENZ 300 1993 car safety problem was reported on Jan 23, 2003.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with ELECTRICAL SYSTEM:WIRING:FRONT UNDERHOOD . mercedes 1993 300e wire harness engine wiring harness.(300e mercedes) cracked and brittle. made with very poor materialsmade. this is a known problem with this year and make of mercedes. if you own one of these cars it is well known you will need to replace your harness. mercedes knows of this problem and does nothing to help. i have a problem when my car will not pass smog until i replace mine. i think mercedes should a the least replace the part at no charge. thousands of these cars were made and at a cost of over $500.00 per harness this is a lot of money from consumers. if you can help great. thanks in advance for your help. dave myers.Mileage was 103756 miles. Vehicle Identification Number (VIN):WDBEA32E6PB. Mercedes Benz 300 1993 problem was reported in SAN JOSE, CA. Vehicle was purchased on Aug 12, 2002. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Mercedes Benz 300 1993 drive type:RWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mercedes Benz 300 1993 TRANSMISSION TYPE: AUTO. DEALER'S NAME: AUTO CITY . DEALER'S CITY: SAN JOSE . DEALER'S STATE CODE: CA.

Mercedes Benz 300 1993 Electrical System Wiring Review #10052963

MERCEDES BENZ 300 1993 car safety problem was reported on Dec 19, 2003.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with ELECTRICAL SYSTEM:WIRING . during a recent service of my vehicle at an authorized mercedes benz service center, i was informed that the insulation covering my wires were decomposing and the wires were exposed to the engine, hence creating a safety hazard for my family. due to the severity of this problem, and the possible consequences if the wires caught on fire, i attempted to ascertain some clarity to what may have caused this problem. i then spoke to the mechanic, at which time he advised it was a material defect. during this brief discussion it was also revealed that this was not the first time he had observed this problem with 1993 300e class. since, this appeared to be a habitual defect with this make and model; i asked if a recall had been issued to replace this decomposing wire harness. as a result, he replied "no." i then paid to replace my wire harness because of this extreme hazardous condition. *la.Vehicle Identification Number (VIN):WDBEA32E6PB. Mercedes Benz 300 1993 problem was reported in REX, GA. Vehicle was purchased on Sept 01, 2002. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Mercedes Benz 300 1993 TRANSMISSION TYPE: AUTO.

Mercedes Benz 300 1993 Engine And Engine Cooling Engine

Mercedes Benz 300 1993 Engine And Engine Cooling Engine Review #10109323

MERCEDES BENZ 300 1993 car safety problem was reported on Dec 01, 2004.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with ENGINE AND ENGINE COOLING:ENGINE . head gasket and fuel injector problems. *bf *jb.Mercedes Benz 300 1993 problem was reported in DETROIT, MI. Vehicle was purchased on Feb 01, 2001. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mercedes Benz 300 1993 Fuel System, Gasoline Fuel Injection System

Mercedes Benz 300 1993 Fuel System, Gasoline Fuel Injection System Review #10109323

MERCEDES BENZ 300 1993 car safety problem was reported on Dec 01, 2004.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM . head gasket and fuel injector problems. *bf *jb.Mercedes Benz 300 1993 problem was reported in DETROIT, MI. Vehicle was purchased on Feb 01, 2001. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mercedes Benz 300 1993 Electrical System Wiring

Mercedes Benz 300 1993 Electrical System Wiring Review #10154252

MERCEDES BENZ 300 1993 car safety problem was reported on Feb 20, 2006.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with ELECTRICAL SYSTEM:WIRING . 1993 mb 300e - wiring harness has begun to deteriorate causing the engine to stall and or not start. stalling can occur while driving, thus losing all power to properly control the vehicle. *jb.Mileage was 158000 miles. Vehicle Identification Number (VIN):WDBEA32E3PB. Mercedes Benz 300 1993 problem was reported in BONNER SPRINGS, KS. Vehicle was purchased on Apr 01, 2004. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Mercedes Benz 300 1993 drive type:RWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mercedes Benz 300 1993 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 65 mph. DEALER'S NAME: NA .

Mercedes Benz 300 1993 Electrical System Wiring Front Underhood

Mercedes Benz 300 1993 Electrical System Wiring Front Underhood Review #10154262

MERCEDES BENZ 300 1993 car safety problem was reported on Mar 31, 2006.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with ELECTRICAL SYSTEM:WIRING:FRONT UNDERHOOD . 1993 mercedes benz 300e the wiring on the fuel injector system (as well as other areas of the harness) was replaced 5 years ago as defective now it is defective again. mercedes benz refuses to accept responsibility for this issue. i have been told that the car is a potential safety hazard as the risk of fire is good. mercedes appears to have used an insulation that is known for degradation and refuses to recall or care for the issue. *jb.Mileage was 98000 miles. Vehicle Identification Number (VIN):WDBEA28E6PB. Mercedes Benz 300 1993 problem was reported in WINTER GARDEN, FL. Original Owner. Vehicle was purchased on Nov 20, 1992. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Mercedes Benz 300 1993 drive type:RWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mercedes Benz 300 1993 TRANSMISSION TYPE: AUTO.

Mercedes Benz 300 1993 Electrical System Wiring Review #10154300

MERCEDES BENZ 300 1993 car safety problem was reported on Mar 28, 2006.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with ELECTRICAL SYSTEM:WIRING . when having the car serviced, the repair facility identified major deterioration of the engine wiring harness. they indicated that this could be a safety hazard, possibly causing a fire or losing all power to the vehicle while driving, making it very difficult to control the vehicle. *nm.0 person(s) died.Vehicle Identification Number (VIN):WDBEA28E5PC. Mercedes Benz 300 1993 problem was reported in ELK GROVE, CA. Vehicle was purchased on Oct 25, 1998. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Mercedes Benz 300 1993 drive type:RWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mercedes Benz 300 1993 TRANSMISSION TYPE: AUTO.

Mercedes Benz 300 1993 Electrical System Wiring Front Underhood Review #10155776

MERCEDES BENZ 300 1993 car safety problem was reported on Apr 13, 2005.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with ELECTRICAL SYSTEM:WIRING:FRONT UNDERHOOD . i own a 1993 mercedes benz 300e. i noticed a section of the wiring harness underneath my hood back against the firewall has begun to deteriorate. the protective plastic on the wiring harness is cracking, exposing wire. looks like a fire hazard. my car has stalled several times for no apparent reason, possibly related to the wire problem. *nm.Mileage was 90000 miles. Vehicle Identification Number (VIN):WDBEA32E3PB. Mercedes Benz 300 1993 problem was reported in MONTEBELLO, CA. Vehicle was purchased on Mar 15, 2004. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Mercedes Benz 300 1993 drive type:RWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mercedes Benz 300 1993 TRANSMISSION TYPE: AUTO.

Mercedes Benz 300 1993 Electrical System Wiring Front Underhood Review #10184878

MERCEDES BENZ 300 1993 car safety problem was reported on Mar 02, 2007.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with ELECTRICAL SYSTEM:WIRING:FRONT UNDERHOOD . decayed engine wiring harness. miscellaneous engine error indications, asr light coming on (car in "limp home" mode). not traceable to any component failure. inability to start the car. refusal of independent mechanic to work on the car until the wiring harness has been replaces. failure occurs on 65 mph road, inability to attain highway speeds, repeated stalling. car is at home in garage and will not run for more than a few seconds. *jb.0 person(s) were injured. 0 person(s) died.Mileage was 214000 miles. Vehicle Identification Number (VIN):WDBEA32E8PB. Mercedes Benz 300 1993 problem was reported in JEFFERSON, MD. Vehicle was purchased on Apr 23, 2001. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Mercedes Benz 300 1993 drive type:RWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mercedes Benz 300 1993 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 65 mph.

Mercedes Benz 300 1993 Electrical System Wiring Review #10185318

MERCEDES BENZ 300 1993 car safety problem was reported on Jan 01, 2007.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with ELECTRICAL SYSTEM:WIRING . wiring harness disintergrated causing wires exposed and touching other wires. little or no insulation is left on most wires. the engine surges/charges while complete idle and break fully on hold. .0 person(s) were injured. 0 person(s) died.Mileage was 80000 miles. Vehicle Identification Number (VIN):WDBEA52E5PB. Mercedes Benz 300 1993 problem was reported in ATLANTA, GA. Vehicle was purchased on May 15, 1999. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Mercedes Benz 300 1993 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mercedes Benz 300 1993 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 0 mph.

Mercedes Benz 300 1993 Electrical System Wiring Front Underhood Review #10198453

MERCEDES BENZ 300 1993 car safety problem was reported on Aug 02, 2007.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with ELECTRICAL SYSTEM:WIRING:FRONT UNDERHOOD . i own a 1993 mercedes 300e that for the second time has had engine wiring harness failure. i find this to be a very unsafe problem with insulation from the wire becoming brittle and falling off. i of at least three other mercedes owners that have experienced the same problem. this is a time bomb waiting to happen. *jb.0 person(s) were injured. 0 person(s) died.Mileage was 183000 miles. Vehicle Identification Number (VIN):WDBEA32E3PB. Mercedes Benz 300 1993 problem was reported in MOSELEY, VA. Vehicle was purchased on Apr 04, 2003. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Mercedes Benz 300 1993 drive type:RWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mercedes Benz 300 1993 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 15 mph. DEALER'S NAME: RAY KATENA . DEALER'S CITY: NEW BRUNSWICK . DEALER'S STATE CODE: NJ.

Mercedes Benz 300 1993 Fuel System, Gasoline Fuel Injection System

Mercedes Benz 300 1993 Fuel System, Gasoline Fuel Injection System Review #10215182

MERCEDES BENZ 300 1993 car safety problem was reported on Jan 16, 2008.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM . fuel injector harness is dry rotted as seen in the images on this site. i just recently discovered that there is a major defect with the harness assembly due to poor workmanship this is certainly a manufacturing defect. mercedes should replace the harness free of charge. *tr.Vehicle Identification Number (VIN):WDBEA32E5PB. Mercedes Benz 300 1993 problem was reported in PASADENA, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. DEALER'S NAME: UNKNOWN .

Mercedes Benz 300 1993 Electrical System

Mercedes Benz 300 1993 Electrical System Review #10225826

MERCEDES BENZ 300 1993 car safety problem was reported on Jan 06, 2008.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with ELECTRICAL SYSTEM . the engine wiring harness of my mercedes 1993 300e wires had disintegrated causing shortages on the wires. it is unbelievable mercedes with such high reputation on quality would ignore such failures on their part. *tr.Mileage was 97400 miles. Vehicle Identification Number (VIN):WDBEA32E1PB. Mercedes Benz 300 1993 problem was reported in SAN JOSE, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. VEHICLE SPEED: 30 mph.

Mercedes Benz 300 1993 Electrical System Review #10227117

MERCEDES BENZ 300 1993 car safety problem was reported on Apr 28, 2008.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with ELECTRICAL SYSTEM . 1993 300e 3.2 m104 engine wiring harness disintergrating, wire insulation falls apart entire wiring harness wires even not exposed to heat damaged. chronic problem all 3 of our mercedes have this problem the 300e the worst. i worked at mercedes and replaced these harness every week. this is very unsafe can result in fires, ecm failure, drivable issues, no start, and many more problems. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 70000 miles. Mercedes Benz 300 1993 problem was reported in GLENDALE, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mercedes Benz 300 1993 Electrical System Review #10227953

MERCEDES BENZ 300 1993 car safety problem was reported on Mar 17, 2006.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with ELECTRICAL SYSTEM . vehicle is 1993 mercedes 300e sedan. 1. strange things go on with the electrical system 2. when unlocking key, sometimes the alarm will go on. 3. check engine light will not go off even after repair was done. 4. sometimes air blower will work, sometimes not. 5. sometimes antenna will come up, sometimes not. this leads me to believe that the wiring harness might be affecting the car's electrical performance. i would hate to strip the harness to find out. but there are plenty of complaints now on this wiring harness problem. i wish that mercedes will do a recall and repair these cars. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 130000 miles. Vehicle Identification Number (VIN):WDBEA32E7PB. Mercedes Benz 300 1993 problem was reported in VALLEJO, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. DEALER'S NAME: USED CAR DEALER . DEALER'S CITY: SANTA ROSA CA . DEALER'S STATE CODE: 00. DEALER'S ZIPCODE: 95407 .

Mercedes Benz 300 1993 Unknown Or Other

Mercedes Benz 300 1993 Unknown Or Other Review #10229661

MERCEDES BENZ 300 1993 car safety problem was reported on June 02, 2008.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with UNKNOWN OR OTHER . the engine / fuel injection wiring harness of my 1993 mercedes-benz 300e has cracked insulation throughout and is beginning to short out with the risk of causing dangerous engine malfunction and even fire inside my engine compartment. i have read many reports of other mercedes-benz cars of the same age range having the exact same defect. i have brought it in to my mechanic several times because of the hesitation and shorting that occurs - especially when i have the ac or heater running and have spent a significant amount of money on trying to remedy it by attempting to re-wrap the wiring but it only afforded me a temporary fix at best. the estimate i was given today was for $1,400 for the wiring harness and another $700 - $800 for the labor cost associated with it's install. from the number of similar anecdotal stories i have read online while researching this issue, i wonder why mercedes benz has not issued a recall on this obvious design defect. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 150000 miles. Mercedes Benz 300 1993 problem was reported in BROOKLYN PARK, MN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mercedes Benz 300 1993 Electrical System

Mercedes Benz 300 1993 Electrical System Review #10229661

MERCEDES BENZ 300 1993 car safety problem was reported on June 02, 2008.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with ELECTRICAL SYSTEM . the engine / fuel injection wiring harness of my 1993 mercedes-benz 300e has cracked insulation throughout and is beginning to short out with the risk of causing dangerous engine malfunction and even fire inside my engine compartment. i have read many reports of other mercedes-benz cars of the same age range having the exact same defect. i have brought it in to my mechanic several times because of the hesitation and shorting that occurs - especially when i have the ac or heater running and have spent a significant amount of money on trying to remedy it by attempting to re-wrap the wiring but it only afforded me a temporary fix at best. the estimate i was given today was for $1,400 for the wiring harness and another $700 - $800 for the labor cost associated with it's install. from the number of similar anecdotal stories i have read online while researching this issue, i wonder why mercedes benz has not issued a recall on this obvious design defect. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 150000 miles. Mercedes Benz 300 1993 problem was reported in BROOKLYN PARK, MN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mercedes Benz 300 1993 Fuel System, Gasoline

Mercedes Benz 300 1993 Fuel System, Gasoline Review #10229661

MERCEDES BENZ 300 1993 car safety problem was reported on June 02, 2008.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with FUEL SYSTEM, GASOLINE . the engine / fuel injection wiring harness of my 1993 mercedes-benz 300e has cracked insulation throughout and is beginning to short out with the risk of causing dangerous engine malfunction and even fire inside my engine compartment. i have read many reports of other mercedes-benz cars of the same age range having the exact same defect. i have brought it in to my mechanic several times because of the hesitation and shorting that occurs - especially when i have the ac or heater running and have spent a significant amount of money on trying to remedy it by attempting to re-wrap the wiring but it only afforded me a temporary fix at best. the estimate i was given today was for $1,400 for the wiring harness and another $700 - $800 for the labor cost associated with it's install. from the number of similar anecdotal stories i have read online while researching this issue, i wonder why mercedes benz has not issued a recall on this obvious design defect. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 150000 miles. Mercedes Benz 300 1993 problem was reported in BROOKLYN PARK, MN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mercedes Benz 300 1993 Electrical System

Mercedes Benz 300 1993 Electrical System Review #10248616

MERCEDES BENZ 300 1993 car safety problem was reported on Nov 11, 2008.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with ELECTRICAL SYSTEM . 1. burning smell 2. poor running fast idle to no idle 3. bm never heard of the problem. *tr.Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Mileage was 120000 miles. Vehicle Identification Number (VIN):WDBEA28E7PC. Mercedes Benz 300 1993 problem was reported in RIVERVIEW, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 5 mph.

Mercedes Benz 300 1993 Electrical System Review #10398067

MERCEDES BENZ 300 1993 car safety problem was reported on Apr 01, 2011.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with ELECTRICAL SYSTEM . during normal operation of my vehicle, the vehicle began to act erratically. at start, the vehicle would not normally idle; instead it lurched between 500-1500 rpm. during operation, at a random points, the vehicle would not respond to pressing the gas, instead surging power until i stop and idle for a minute. it turns out that the problem is attributable to the wiring harness, which is disintegrating. this well-known problem is attributable to the use of inferior materials by mercedes-benz which are not suitable for use in high-temperature environments. recently, the problem has gotten worse; today, the vehicle does not achieve any good acceleration nor is it very responsive when the gas pedal is pressed. operation of the vehicle is seriously impaired at this time. so far, this problem has necessitated the replacement of a battery. i've been advised that the cost to repair this problem will be upwards of $2,000 due to the cost of the replacement harness, a part which is normally designed to withstand the entire lifespan of the vehicle. *tr.Mileage was 127000 miles. Vehicle Identification Number (VIN):WDBEA28E1PC. Mercedes Benz 300 1993 problem was reported in CHICAGO, IL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Mercedes Benz 300 1993 drive type:RWD. VEHICLE SPEED: 0 mph.

Mercedes Benz 300 1993 Electrical System Wiring

Mercedes Benz 300 1993 Electrical System Wiring Review #10417754

MERCEDES BENZ 300 1993 car safety problem was reported on July 17, 2011.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with ELECTRICAL SYSTEM:WIRING . my research indicate that this engine wiring harness problem is an ongoing issue for many mercedes benz, 300 e, and 300se cars with the twin cam engines made between the years of 1993-1995. not only i am unable to have routine maintenance done, but i am told by the repair facility that this presents a safety problem, because there is a risk of fire associated with this defect. *tt .Mileage was 37854 miles. Vehicle Identification Number (VIN):WDBEA32E1PB. Mercedes Benz 300 1993 problem was reported in BOGOTA, NJ. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Mercedes Benz 300 1993 drive type:RWD. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph.

Mercedes Benz 300 1993 Electrical System Review #10437495

MERCEDES BENZ 300 1993 car safety problem was reported on June 11, 2007.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with ELECTRICAL SYSTEM . my wiring harness has failed on my 1993 300e mercedes benz the insulation come off wiring. *kb.Vehicle Identification Number (VIN):WDBEA32E5PB. Mercedes Benz 300 1993 problem was reported in MERIDIAN, MS. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Mercedes Benz 300 1993 drive type:RWD. FUEL TYPE: GAS.

Mercedes Benz 300 1993 Electrical System Wiring Review #10437495

MERCEDES BENZ 300 1993 car safety problem was reported on June 11, 2007.MERCEDES BENZ 300 1993, manufactured by MERCEDES-BENZ USA, LLC. had a problem with ELECTRICAL SYSTEM:WIRING . my wiring harness has failed on my 1993 300e mercedes benz the insulation come off wiring. *kb.Vehicle Identification Number (VIN):WDBEA32E5PB. Mercedes Benz 300 1993 problem was reported in MERIDIAN, MS. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Mercedes Benz 300 1993 drive type:RWD. FUEL TYPE: GAS.

Mercedes Benz 300 1993 Electrical System Review #10505881

MERCEDES BENZ 300 1993 car safety problem was reported on Apr 05, 2013.MERCEDES BENZ 300 1993, manufactured by Mercedes-Benz USA, LLC. had a problem with ELECTRICAL SYSTEM . the engine harness problem after owning my car since 1993. it is clear that the engine harness was made with biodegradable material which has now lost it's plastic covering over the metal wires. with wires exposed after the engine harness degration, the car which was supposed to last me for a long time, has become impossible to use. without the proper harness replacement, the car is totally useless. upon checking into this problem i have found out that every e300 built between 1992 and 1997 is built with the same harness. all these cars that are still on the road are having the same issue. i am told this is a major fire hazard, therefore i have stopped using my car. this problem sooner or later will hurt someone until mercedes recalls and replaces the harness for the cars that they have on the road. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 71000 miles. Vehicle Identification Number (VIN):WDBEA28E7PC. Mercedes Benz 300 1993 problem was reported in HOPKINS, MN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: GAS.


Mercedes Benz 300 1993 Systems


Air Bags Frontal 2 Review(s)

Electrical System 9 Review(s)

Electrical System Ignition 1 Review(s)

Electrical System Wiring 7 Review(s)

Electrical System Wiring Front Underhood 8 Review(s)

Engine And Engine Cooling Cooling System Fan 1 Review(s)

Engine And Engine Cooling Engine 5 Review(s)

Engine And Engine Cooling Engine Gasoline 1 Review(s)

Equipment Electrical Air Conditioner 1 Review(s)

Fuel System, Gasoline 1 Review(s)

Fuel System, Gasoline Fuel Injection System 2 Review(s)

Seat Belts Front Anchorage 1 Review(s)

Seat Belts Front Retractor 1 Review(s)

Service Brakes, Hydraulic Foundation Components 1 Review(s)

Steering Gear Box Shaft Sector 1 Review(s)

Steering Wheel And Handle Bar 2 Review(s)

Structure Frame And Members 1 Review(s)

Tires 2 Review(s)

Unknown Or Other 1 Review(s)

Vehicle Speed Control 2 Review(s)

Visibility Defroster/defogger System 1 Review(s)



Search 1000s of Car Reviews, Recalls and Technical Bulletins
Start by entering a car model, system, manufacturer or any combination of keywords.


Mercedes Benz 300 1993 Reports


ML500 airconditioning temp suddenly going to heat changing temp control does nothing. Have fitted new controls unit . Could you suggest what might cause this fault

My 1995 Mercedes Benz S500 started running bad and after giving it a tune up it ran smoothly for about 15 to 20 minutes then it began to sputter backfire and shut off. I was told that the engine harness was the problem but after spot checking the

My car bought new in November 2009 and with currently only 6200 miles on it keeps having battery
draining problems. One time I had to call AAA to charge the battery. Are there any known problems related to this?

I am reporting a problem regarding speed control, significant acceleration, and none deployment of airbag of a 2008 Mercedes Benz C-300.
 
On Feb.28, 2012 at 1:00pm as I was trying to park my car in the garage where I work (I probably had a

al entrar a una rotonda el motor se detiene,al dar contacto reinicia su funcionamiento sin problemas ??

 I have ML 430 recharged a/c twice, it cools for some days and stop cooling again, we told me that it's not leaking, am getting frustrated with this problem I need somebody to help me.

 I have ML 430 recharged the a/c twice, it cools for some days and stop cooling again, the guy that worked on it told me that it's not leaking,now it's blowing hot again, am getting frustrated with this problem I need somebody to help me.

i have a 500 sl 85 merc havent driven in 1 yr just starting driving and its idleing high in park, when car get hot and in park it seems to do this. it also jerks a little when i put in reverse. help!!

Hi; Looking for info on replacing rear shocks on my 2006 Ml350,,, pretty tight squeeze inside the rear compartment left & right side panels to access the top bolt especially the right side    Peter

my 1997 C230 shakes and wants to stall out when accelerating, and if you push it to the floor, it down shifts hard and hardley wont go

my 1997 C230 wont hardley accelerate

Had my ML320 in repair shop to have new light fitted, no problems prior to this on collection wouldnt start but lots of lights on dash when ignition switched on, starter wouldnt operate. Disconnected battery for hour & then started until switc

Discuss Mercedes Benz 300


No comments have been provided.


Mercedes Benz 300 1993 Service Bulletins


Mercedes Benz 300 1993

Mercedes Benz 300 1993

Mercedes Benz 300 1993

Mercedes Benz 300 1993