Car-and-Safety.com

Mazda Mazda6 2009 Safety Reports and Reviews



Mazda Mazda6 2009 Reviews



Mazda Mazda6 2009 Engine And Engine Cooling

Mazda Mazda6 2009 Engine And Engine Cooling Review #10260383

MAZDA MAZDA6 2009 car safety problem was reported on Dec 10, 2008.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING . 2009 mazda 6 makes ticking noise at or near idle engine rpm. it can range from soft ticking sound to a very annoying ticking sound. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 1100 miles. Vehicle Identification Number (VIN):1YVHP82B695. Mazda Mazda6 2009 problem was reported in PEORIA, IL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Engine And Engine Cooling Review #10261679

MAZDA MAZDA6 2009 car safety problem was reported on Mar 07, 2009.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING . i took my 2009 mazda6 touring edition in to get my first oil change. the car was in perfect condition with only 3,600 miles. when i returned later to pick up the car i was told that there was a safety recall for the door locks. i said okay so what now. the jim ellis service department said we will give you a loaner. i turned in the car on saturday i picked the car up on tuesday and drove it home. when i arrived at my house i tried to lock the door by pushing the button on the driver side. nothing happened so i tried a few more times. the only way to lock the door was with the key. i called the service department the next morning and they asked if i could bring the car back for them to take a look. i took the car back and they still could not figure out what was wrong. they again gave me a loaner car. thursday evening i was told the car was fixed. they said an engineer had looked at the car and it was fixed for sure. well guess what it is still not fixed. now they are telling me that the battery must have been run down because the doors were left open. thursday evening i am home with my loaner from jim ellis wondering if i will ever get my car back and if i do get it back will it really be fixed. *tr.0 person(s) were injured. 0 person(s) died.Mazda Mazda6 2009 problem was reported in MARIETTA, GA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2009 Power Train Automatic Transmission

Mazda Mazda6 2009 Power Train Automatic Transmission Review #10265543

MAZDA MAZDA6 2009 car safety problem was reported on Mar 30, 2009.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . i purchased a 2009 mazda6 on 3/26/2009. four days after the purchase the new vehicle was in the shop to replace the automatic transmission. the automatic transmission casting had a small weep hole in it which was causing a leak. dealer had to replace the automatic transmission. for the first 4 weeks i owned the car it was in the garage for 3 weeks. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 440 miles. Vehicle Identification Number (VIN):1YVHP81A995. Mazda Mazda6 2009 problem was reported in LA CROSSE, WI. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2009 Air Bags Frontal Sensor/control Module

Mazda Mazda6 2009 Air Bags Frontal Sensor/control Module Review #10274256

MAZDA MAZDA6 2009 car safety problem was reported on June 13, 2009.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with AIR BAGS:FRONTAL:SENSOR/CONTROL MODULE . tl*the contact owns a 2009 mazda 6. while driving between 35-40 mph, the srs air bag warning indicator illuminated on the instrument panel. the failure occurred intermittently. the vehicle was taken to an authorized dealer and they stated that the front passenger control module failed. the vehicle was repaired under warranty. the failure and current mileages were 1,531. updated 07/01/09 *bf updated 07/06/09.*jb.0 person(s) were injured. 0 person(s) died.Mileage was 1531 miles. Vehicle Identification Number (VIN):1YVHP81AX95. Mazda Mazda6 2009 problem was reported in LANCASTER, PA. Vehicle was purchased on Apr 29, 2009. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. VEHICLE SPEED: 35 mph. DEALER'S NAME: LANCASTER TOYOTA MAZDA . DEALER'S CITY: EAST PETERSBURG . DEALER'S STATE CODE: PA. DEALER'S ZIPCODE: 17520 .

Mazda Mazda6 2009 Tires

Mazda Mazda6 2009 Tires Review #10287376

MAZDA MAZDA6 2009 car safety problem was reported on June 24, 2009.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with TIRES . dear sir i have recently bought a new mazda 6 car fitted with dunlop tires sp2050 .while i was driving on the high way the right front tire blew out and causes a hole between the tier wring and the surface that touch the road. although the car was moving about 80 kmph. my family and myself life was exposed to danger when this incident was happened. the car is brand new it was made only 16,400km. when i went to claim for tier replacement but both mazda and dunlop agents denied responsibility that this is a defective tier. *tr.Mileage was 16400 miles. Vehicle Identification Number (VIN):JM7GH445991. Mazda Mazda6 2009 problem was reported in RIYADH, 00. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 80 mph.

Mazda Mazda6 2009 Power Train Automatic Transmission

Mazda Mazda6 2009 Power Train Automatic Transmission Review #10289684

MAZDA MAZDA6 2009 car safety problem was reported on Dec 15, 2008.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . 2009 mazda 6 i touring at makes an intense buzzing vibration sound after shifting to drive at first ignition of the day before any acceleration. the vibration comes from the center cupholders in the front, which in turn is from the automatic transmission itself. this is a recurring issue from day one. *tr.Mazda Mazda6 2009 problem was reported in QUINCY, MA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2009 Engine And Engine Cooling Exhaust System

Mazda Mazda6 2009 Engine And Engine Cooling Exhaust System Review #10289695

MAZDA MAZDA6 2009 car safety problem was reported on Dec 23, 2008.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING:EXHAUST SYSTEM . my 2009 mazda 6 i touring at during driving at 20-25 mph or at 50-80 mph produces a sulfur emission from the air vents inside as well as from the exhaust pipes. this began when the odometer was just over 300 miles. even though this car requires regular unleaded octane rating 87 gas, octane rating 92 has been used as well as generic brands of gas. since switching back from octane 92 gas to regular unleaded octane 87 gas (as advised from the metro mazda dealership in ma) and from the generic to a more recognized brand of gas (mobile), the sulfur emission from the air vents has been greatly reduced to become a rare occurrence, but is still there, as recent as 10/22/09 on the highway with about 4200 miles on the odometer. the sulfur emission still comes out from the exhaust pipes and is most notable in the garage whether the car is running or not. the smell is still noticed when outside, running or not, and happens frequently, almost every time the car is shut off. whether distance in travel is short or long, the emission from both areas remains and has been ongoing since the first occurrence. *tr.Vehicle Identification Number (VIN):1YVHP82A095. Mazda Mazda6 2009 problem was reported in QUINCY, MA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2009 Service Brakes, Hydraulic

Mazda Mazda6 2009 Service Brakes, Hydraulic Review #10297224

MAZDA MAZDA6 2009 car safety problem was reported on Nov 20, 2009.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES, HYDRAULIC . my brakes on my 2009 mazda 6s have failed 3 times, resulting in the master cylinder being replaced 2x, and the abs unit 1x. when i would bring my car to a stop, it would start to roll again. this made me very concerned about causing an accident. *tr.Mileage was 7000 miles. Vehicle Identification Number (VIN):1YVHP82B995. Mazda Mazda6 2009 problem was reported in ANCHORAGE, AK. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Exterior Lighting

Mazda Mazda6 2009 Exterior Lighting Review #10310288

MAZDA MAZDA6 2009 car safety problem was reported on Feb 13, 2010.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with EXTERIOR LIGHTING . new hid headlamps have very little light to see above a certain height depending on road terrain. as example when going downhill you cannot see the lanes in upcoming uphill grades. the lack of elimination in the area above the horizontal projection, prevents seeing road signs, lane changes, and pedestrians if you are traveling at a downhill angle on your approach. my car, 2009 mazda 6, has adjustment to raise projection depending on weight of passengers in back seat, but these new lights in my opinion are still unsafe when driving at night. i spoke to service department at dealer to inquire about possibly changing out these lights for some other type, but he said he had same problem when driving his vehicle at night. this headlight design is being added to more vehicle makes and is making night driving a safety issue that needs to be addressed for all new cars using this design. these new headlamps are worthless on hilly terrain. since the service department person agreed and there is no apparent fix, i believe this will result in more night accidents. *tr.Vehicle Identification Number (VIN):1HGCM56306A. Mazda Mazda6 2009 problem was reported in YORK, PA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2009 Electrical System

Mazda Mazda6 2009 Electrical System Review #10321440

MAZDA MAZDA6 2009 car safety problem was reported on Mar 04, 2010.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with ELECTRICAL SYSTEM . started vehicle put in rev. accelerated to full throttle, had in put in neutral still full throttle then turned off engine. no codes found.*dt.Mileage was 18000 miles. Vehicle Identification Number (VIN):1YVHP82B795. Mazda Mazda6 2009 problem was reported in MUKILTEO, WA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 1 mph.

Mazda Mazda6 2009 Electrical System Review #10321444

MAZDA MAZDA6 2009 car safety problem was reported on Mar 04, 2010.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with ELECTRICAL SYSTEM . started vehicle put in rev. accelerated to full throttle, had to put in neutral still full throttle then turned off engine. no codes found. *dt.Mileage was 18000 miles. Vehicle Identification Number (VIN):1YVHP82B795. Mazda Mazda6 2009 problem was reported in MUKILTEO, WA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 1 mph.

Mazda Mazda6 2009 Structure

Mazda Mazda6 2009 Structure Review #10331181

MAZDA MAZDA6 2009 car safety problem was reported on Apr 11, 2010.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with STRUCTURE . 2009 mazda isport has gone through two complete sets of brakes, rotors, and pads and it only has 22,000 miles on it. the brake pedal is very inconsistent when applied. sometimes it goes all the way to the floor and sometimes it only travels a small distance. it's much worse when the dsc is engaged. *tr.Mileage was 11000 miles. Vehicle Identification Number (VIN):1YVHP82A695. Mazda Mazda6 2009 problem was reported in WEST WARWICK, RI. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 40 mph.

Mazda Mazda6 2009 Equipment

Mazda Mazda6 2009 Equipment Review #10332240

MAZDA MAZDA6 2009 car safety problem was reported on May 24, 2010.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with EQUIPMENT . tl* the contact owns a 2009 mazda 6. while braking, the tire pressure warning light illuminated and the front tire was flat within 30 seconds. the dealer advised that the valve stems were corroded and caused the tire failure. the vehicle was repaired under the contact¿s factory warranty. the failure and current mileages were 13,000..Mileage was 13000 miles. Vehicle Identification Number (VIN):1YVHP82A795. Mazda Mazda6 2009 problem was reported in BALTIMORE, MD. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Air Bags

Mazda Mazda6 2009 Air Bags Review #10371075

MAZDA MAZDA6 2009 car safety problem was reported on Nov 22, 2010.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with AIR BAGS . tl*the contact owns a 2009 mazda, mazda 6. while driving approximately 70-75 mph, the contact lost control of the vehicle and it rolled over. the contact sustained minor injuries. no air bags deployed. a police report was filed. the vehicle was destroyed. the contact stated earlier in the year that the vehicle was making a noise and the transmission was replaced free of charge. the failure mileage was approximately 6,500..Vehicle was involved in a crash. 1 person(s) were injured. Mileage was 6500 miles. Vehicle Identification Number (VIN):1YVHP82A195. Mazda Mazda6 2009 problem was reported in TOLLESON, AZ. Accident was reported to Police. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 70 mph.

Mazda Mazda6 2009 Fuel System, Gasoline Storage Tank Assembly

Mazda Mazda6 2009 Fuel System, Gasoline Storage Tank Assembly Review #10392590

MAZDA MAZDA6 2009 car safety problem was reported on Mar 21, 2011.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY . tl*the contact owns a 2009 mazda mazda6. the contact stated that they turned the defrost on and a yellow sac spider came out of the vent and bit him. the contact spoke with a pharmacist regarding the spider bite and was told that they heard of the failure with the yellow sac spider. the contact spoke with manufacturer and was told that they had considered issuing a recall notice at the end of march or the beginning of april, because this happened in other countries. the contact stated that the manufacturer came to his home, retrieved the vehicle, inspected it by placing a stick and a brush inside the fuel line. if there were no spiders in the fuel line, they would return the vehicle. the contact was concerned since they were not checking the air vents where the spider was. the contact was concerned about the safety risk since the spiders could come out of the vents while driving. the vin was unknown. the failure mileage and current mileage was 17,800..Mileage was 17800 miles. Mazda Mazda6 2009 problem was reported in WARWICK, RI. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Tires Pressure Monitoring And Regulating Systems

Mazda Mazda6 2009 Tires Pressure Monitoring And Regulating Systems Review #10397137

MAZDA MAZDA6 2009 car safety problem was reported on Dec 09, 2010.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS . tl* the contact was servicing a 2009 mazda mazda6. the contact stated that the valve stem on the tire pressure mounting train system was rusted and corroded and causing the tire to leak air abnormally. the contact did not inform the dealer or manufacturer of the failure, nor was the vehicle repaired. the current mileage was 50,349 and the failure mileage was 43,349. .Mileage was 43349 miles. Vehicle Identification Number (VIN):1YVHP82A295. Mazda Mazda6 2009 problem was reported in WEST ALLIS, WI. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2009 Air Bags

Mazda Mazda6 2009 Air Bags Review #10405271

MAZDA MAZDA6 2009 car safety problem was reported on June 03, 2011.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with AIR BAGS . in the parking lot of my local walgreen's, i got out of my car, closed the door and my air bags deployed. all curtain airbags, and the driver side seat airbag. i was not in any sort of accident, nor where there any cars around me. i simply pulled into the walgreen's to stop and verified i had not left something important that i needed at home. .0 person(s) were injured. 0 person(s) died.Mileage was 56000 miles. Vehicle Identification Number (VIN):1YVHP82A095. Mazda Mazda6 2009 problem was reported in BALLWIN, MO. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Structure

Mazda Mazda6 2009 Structure Review #10406174

MAZDA MAZDA6 2009 car safety problem was reported on June 13, 2011.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with STRUCTURE . i have a 2009 mazda 6 s touring with 18000 miles on it and the three screws that hold the drivers door latch assembly on came loose and fell out. these screws should of been locked tightened in place and it seems that all the latch screws on the car were not secured not to work loose. *tr. ..updated 04/18/13 *bf .Mileage was 18839 miles. Vehicle Identification Number (VIN):1YVHP82A795. Mazda Mazda6 2009 problem was reported in STEVENS, PA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. Mazda Mazda6 2009 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Latches/locks/linkages Doors Latch

Mazda Mazda6 2009 Latches/locks/linkages Doors Latch Review #10406174

MAZDA MAZDA6 2009 car safety problem was reported on June 13, 2011.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with LATCHES/LOCKS/LINKAGES:DOORS:LATCH . i have a 2009 mazda 6 s touring with 18000 miles on it and the three screws that hold the drivers door latch assembly on came loose and fell out. these screws should of been locked tightened in place and it seems that all the latch screws on the car were not secured not to work loose. *tr. ..updated 04/18/13 *bf .Mileage was 18839 miles. Vehicle Identification Number (VIN):1YVHP82A795. Mazda Mazda6 2009 problem was reported in STEVENS, PA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. Mazda Mazda6 2009 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Engine And Engine Cooling Cooling System

Mazda Mazda6 2009 Engine And Engine Cooling Cooling System Review #10412323

MAZDA MAZDA6 2009 car safety problem was reported on July 12, 2011.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING:COOLING SYSTEM . i was driving with my ac on in my 2009 mazda 6 and the car began to overheat and the ac got hot. i had to pull over with my infant in the car into the nearest parking lot. the car was brought to mazda and they said that the cooling fan for the motor and the ac were faulty, but since the car was 4,000 miles over warranty, they would only give $200 toward the $907 job for their faulty part. i looked it up and there is a tsb for this part. nhtsa item #10032548 . if there are many others having a problem with this faulty manufactured part on relatively new cars i believe there should be a recall. it was the hottest day of the summer here when the ac went and my car started to overheat with my 6 month old in the car. my car only has 40,000 miles on it. *tr.Mileage was 40000 miles. Mazda Mazda6 2009 problem was reported in WASHINGTONVILLE, NY. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 20 mph.

Mazda Mazda6 2009 Air Bags

Mazda Mazda6 2009 Air Bags Review #10414295

MAZDA MAZDA6 2009 car safety problem was reported on Dec 20, 2009.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with AIR BAGS . airbag light flashing for no reason. car taken to dealer and part was ordered and replaced per bulletin 08-001/09. apparently corroded part. now, 07/08/2010, airbag light flashing again. must take to dealer to service again. (now out of warranty).0 person(s) were injured. 0 person(s) died.Mileage was 27657 miles. Vehicle Identification Number (VIN):1YVHP81A295. Mazda Mazda6 2009 problem was reported in HATTIESBURG, MS. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Structure Body Door Hinge And Attachments

Mazda Mazda6 2009 Structure Body Door Hinge And Attachments Review #10434591

MAZDA MAZDA6 2009 car safety problem was reported on Aug 01, 2011.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with STRUCTURE:BODY:DOOR:HINGE AND ATTACHMENTS . 2009 mazda 6. consumer writes regarding outer door handle voluntary safety recall 5209a *tgw the consumer stated the dashboard indicator light illuminated indicating that one of the doors was still open while the vehicle was in motion. despite checking to make sure all the doors were securely closed, the light continued to stay on, until the consumer stopped and turned off the engine. also, the abs, tcs and brake indicators illuminated as well. the consumer then discovered he was not able to lock the vehicle by using the lock button on the driver's side door handle. the button was non-responsive and symptoms only worsened as time went by. the consumer went to a repair facility and a diagnostics test revealed the faulty door handle was the reason for the malfunction. the consumer stated he was never informed of the recall. when the consumer went back to the dealer, he was informed, his vin was not included. *jb.Vehicle Identification Number (VIN):1YVHP82A295. Mazda Mazda6 2009 problem was reported in WILTON MANOR, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. Mazda Mazda6 2009 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. DEALER'S NAME: EXPERT AUTO REPAIR . DEALER'S TELEPHONE NUMBER: 954-935-0202 . DEALER'S CITY: MARGATE . DEALER'S STATE CODE: FL. DEALER'S ZIPCODE: 33063 .

Mazda Mazda6 2009 Wheels

Mazda Mazda6 2009 Wheels Review #10435004

MAZDA MAZDA6 2009 car safety problem was reported on May 09, 2011.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with WHEELS . tl* the contact owns a 2009 mazda mazda6. the contact stated that the passenger side rear tire valve stem was corroded and causing the tire to go flat. the vehicle was taken to the dealer who advised that there were no recalls on the tires or the valve stem. the failure was experienced twice. the dealer first repaired the vehicle at the dealers expense but denied assistance with repairing the vehicle a second time. the manufacturer was not made aware of the failure. the failure mileage was 26,000 and the current mileage was 37,000..Mileage was 26000 miles. Vehicle Identification Number (VIN):1YVHP82A695. Mazda Mazda6 2009 problem was reported in MERRICK, NY. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Wheels Review #10442692

MAZDA MAZDA6 2009 car safety problem was reported on Dec 06, 2011.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with WHEELS . valve stem cracked then completely broke off under the plastic cap. the tire pressure warning light had been coming on 2-3 days prior to incident. each morning when cold during first start up light would come on, after a few minutes of driving after vehicle warmed light would turn off. on way home from work traveling 70mph light came back on. took the next exit and stopped at gas station to fill up tires, removed valve stem cap and installed air hose. air hose could not fill up tire, air just came out of the side of stem, reinstalled valve cap. at that time we didn't know the stem was cracked so i drove the car very slowly approx 3 miles to my parents house so my dad could help. he tried to remove the valve cap, at this time the stem completely broke off at the threads and stayed with the cap. the stem internal parts sprang out so it was necessary to remove the tire and install the spare. we took the tire to nearest belle tire so they could replace the stem but since it was a dealer only part all they could was replace it with a standard rubber stem with no sensor. they mentioned it was a common problem they had seen before, to which i was very surprised. these sensors were created to combat low air pressure after the "tread act" and ironically are causing a low air pressure. the original cause of the pressure light was due to a slightly bent rim on the inside. this had a slow leak after belle tire replaced the stem. we took the tire to brighton mazda the following day to replace the sensor, they too said they had seen cracked stems in the past. please look into this and determine if this is a safety issue. i think its very ironic this is happening when the free rubber stems almost never fail and $70 sensors are breaking on a 3 year old car. *tr.Mileage was 38000 miles. Vehicle Identification Number (VIN):1YVHP82B995. Mazda Mazda6 2009 problem was reported in BRIGHTON, MI. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 70 mph.

Mazda Mazda6 2009 Tires

Mazda Mazda6 2009 Tires Review #10442692

MAZDA MAZDA6 2009 car safety problem was reported on Dec 06, 2011.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with TIRES . valve stem cracked then completely broke off under the plastic cap. the tire pressure warning light had been coming on 2-3 days prior to incident. each morning when cold during first start up light would come on, after a few minutes of driving after vehicle warmed light would turn off. on way home from work traveling 70mph light came back on. took the next exit and stopped at gas station to fill up tires, removed valve stem cap and installed air hose. air hose could not fill up tire, air just came out of the side of stem, reinstalled valve cap. at that time we didn't know the stem was cracked so i drove the car very slowly approx 3 miles to my parents house so my dad could help. he tried to remove the valve cap, at this time the stem completely broke off at the threads and stayed with the cap. the stem internal parts sprang out so it was necessary to remove the tire and install the spare. we took the tire to nearest belle tire so they could replace the stem but since it was a dealer only part all they could was replace it with a standard rubber stem with no sensor. they mentioned it was a common problem they had seen before, to which i was very surprised. these sensors were created to combat low air pressure after the "tread act" and ironically are causing a low air pressure. the original cause of the pressure light was due to a slightly bent rim on the inside. this had a slow leak after belle tire replaced the stem. we took the tire to brighton mazda the following day to replace the sensor, they too said they had seen cracked stems in the past. please look into this and determine if this is a safety issue. i think its very ironic this is happening when the free rubber stems almost never fail and $70 sensors are breaking on a 3 year old car. *tr.Mileage was 38000 miles. Vehicle Identification Number (VIN):1YVHP82B995. Mazda Mazda6 2009 problem was reported in BRIGHTON, MI. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 70 mph.

Mazda Mazda6 2009 Latches/locks/linkages Doors Latch

Mazda Mazda6 2009 Latches/locks/linkages Doors Latch Review #10448036

MAZDA MAZDA6 2009 car safety problem was reported on Feb 14, 2012.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with LATCHES/LOCKS/LINKAGES:DOORS:LATCH . tl* the contact owns a 2009 mazda mazda6. the contact stated that both front door locks detached from the vehicle. the dealer and manufacturer were notified of the failure, but denied any assistance with repairs. the vehicle was not repaired. the approximately failure and current mileages were 58,000. updated 03/16/12*lj the consumer stated three of the screws were missing. he also checked the other doors, and they were either missing or loose. updated 04/09/12.Mileage was 58000 miles. Vehicle Identification Number (VIN):1YVHP81H695. Mazda Mazda6 2009 problem was reported in ADDISON, IL. Vehicle was purchased on Jan 04, 2011. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2009 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2009 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 0 mph. DEALER'S NAME: HOWARD BUICK GMC . DEALER'S TELEPHONE NUMBER: 630-832-950 . DEALER'S ZIPCODE: 60126 .

Mazda Mazda6 2009 Air Bags

Mazda Mazda6 2009 Air Bags Review #10451599

MAZDA MAZDA6 2009 car safety problem was reported on Mar 10, 2011.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with AIR BAGS . tl* the contact owns a 2009 mazda 6 . the contact stated that the airbag light was illuminated so the vehicle was taken to an authorized dealer for diagnosis. the dealer stated that there was a high resistance on the wire going to the driver's side airbag. the dealer cleaned the connector as a remedy however, the light illuminated once again and the dealer replaced the airbag . the failure recurred. the vehicle was not repaired correctly or further. the failure mileage was 16,000 and updated 05/08/12*lj the consumer stated the dealer replaced the driver's side air bag. the air bag light illuminated again, then they replaced the srs contro until. the consumer stated the light illuminated two more times..Mileage was 16000 miles. Vehicle Identification Number (VIN):1YVHP82A695. Mazda Mazda6 2009 problem was reported in WEXFORD, PA. Original Owner. Vehicle was purchased on Mar 31, 2009. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2009 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2009 TRANSMISSION TYPE: AUTO. DEALER'S NAME: BILLCO MOTORS . DEALER'S CITY: WEXFORD . DEALER'S STATE CODE: PA. DEALER'S ZIPCODE: 15090 .

Mazda Mazda6 2009 Tires Valve

Mazda Mazda6 2009 Tires Valve Review #10469283

MAZDA MAZDA6 2009 car safety problem was reported on Aug 02, 2012.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with TIRES:VALVE . tl* the contact owns a 2009 mazda mazda6. the contact stated that while driving, the psi warning light illuminated. the front driver side tire deflated immediately after the warning light illuminated. the vehicle was taken to a repair shop where the contact was advised that there was corrosion on the valve stem for the four tires. the front driver side valve was completely damaged by corrosion.the vehicle was repaired by replacing the four valve stems and the tires. the manufacturer was not made aware of failure. the current mileage and failure mileage was 48,888. .0 person(s) were injured. 0 person(s) died.Mileage was 48888 miles. Vehicle Identification Number (VIN):1YVHP81A495. Mazda Mazda6 2009 problem was reported in MOSCOW, PA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2009 Suspension Front Wheel Bearing

Mazda Mazda6 2009 Suspension Front Wheel Bearing Review #10474704

MAZDA MAZDA6 2009 car safety problem was reported on Aug 01, 2012.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with SUSPENSION:FRONT:WHEEL BEARING . both front wheel bearings went out (simultaneously) over a period of about five days, and there was no crash or accident. it appears to be highly likely that the bearings were defective from the manufacturer for both of them to fail at this low mileage. the vehicle was taken to a mazda dealer, and the technician that did the repair stated that he had never seen both front wheel bearings go bad at such low mileage, and agreed that the bearings were likely defective..0 person(s) were injured. 0 person(s) died.Mileage was 67000 miles. Vehicle Identification Number (VIN):1YVHP82A195. Mazda Mazda6 2009 problem was reported in MILFORD, MI. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. Mazda Mazda6 2009 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. VEHICLE SPEED: 25 mph.

Mazda Mazda6 2009 Wheels

Mazda Mazda6 2009 Wheels Review #10485890

MAZDA MAZDA6 2009 car safety problem was reported on May 15, 2012.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with WHEELS . while driving at 55 mph, the low pressure warning light came on. i attempted to get to a safe place to check my tire but the tire went flat too quickly. i had to change the tire on the road. the tire pressure monitoring device had failed and fallen inside the tire resulting in a rapid pressure drop. corrosion had caused the nut to break apart and fall off. within 6 months the same thing happened on a different tire. driving at 55 mph, the warning light came on and i immediately pulled over to watch my tire rapidly going flat - all within about 20 seconds. i changed my tire on a very busy highway. i was lucky that this did not happen on a multi-lane thruway. this is a very serious safety hazard - the mandated safety device is the cause of the hazard. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 55000 miles. Vehicle Identification Number (VIN):1YVHP81A695. Mazda Mazda6 2009 problem was reported in AKRON, NY. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 55 mph.

Mazda Mazda6 2009 Tires Pressure Monitoring And Regulating Systems

Mazda Mazda6 2009 Tires Pressure Monitoring And Regulating Systems Review #10485890

MAZDA MAZDA6 2009 car safety problem was reported on May 15, 2012.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS . while driving at 55 mph, the low pressure warning light came on. i attempted to get to a safe place to check my tire but the tire went flat too quickly. i had to change the tire on the road. the tire pressure monitoring device had failed and fallen inside the tire resulting in a rapid pressure drop. corrosion had caused the nut to break apart and fall off. within 6 months the same thing happened on a different tire. driving at 55 mph, the warning light came on and i immediately pulled over to watch my tire rapidly going flat - all within about 20 seconds. i changed my tire on a very busy highway. i was lucky that this did not happen on a multi-lane thruway. this is a very serious safety hazard - the mandated safety device is the cause of the hazard. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 55000 miles. Vehicle Identification Number (VIN):1YVHP81A695. Mazda Mazda6 2009 problem was reported in AKRON, NY. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 55 mph.

Mazda Mazda6 2009 Wheels

Mazda Mazda6 2009 Wheels Review #10489058

MAZDA MAZDA6 2009 car safety problem was reported on Dec 16, 2012.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with WHEELS . when i went to go remove the valve stem cap to check the air pressure, the valve stem broke off with the valve cap revealing the valve core. the tire was deflated within seconds. further inspection of the valve stem showed that it was corroded. the valve stem broke off exactly at the point where the cap was screwed to. the dealership did not cover the cost for repairs as my car is not under warranty anymore. the cost for repairs came from my pocket. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 49583 miles. Vehicle Identification Number (VIN):1YVHP82H195. Mazda Mazda6 2009 problem was reported in SCHOFIELD, WI. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Tires Valve

Mazda Mazda6 2009 Tires Valve Review #10489058

MAZDA MAZDA6 2009 car safety problem was reported on Dec 16, 2012.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with TIRES:VALVE . when i went to go remove the valve stem cap to check the air pressure, the valve stem broke off with the valve cap revealing the valve core. the tire was deflated within seconds. further inspection of the valve stem showed that it was corroded. the valve stem broke off exactly at the point where the cap was screwed to. the dealership did not cover the cost for repairs as my car is not under warranty anymore. the cost for repairs came from my pocket. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 49583 miles. Vehicle Identification Number (VIN):1YVHP82H195. Mazda Mazda6 2009 problem was reported in SCHOFIELD, WI. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Structure Body

Mazda Mazda6 2009 Structure Body Review #10492403

MAZDA MAZDA6 2009 car safety problem was reported on Nov 30, 2012.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with STRUCTURE:BODY . while driving on highway at 55 mph the passenger door opened . passenger didn't fall out due to seat belt. found that three screws fell out of door latch. replaced screws, now door can not be opened from outside. *tr .0 person(s) were injured. 0 person(s) died.Mileage was 54000 miles. Vehicle Identification Number (VIN):1YVHP82A995. Mazda Mazda6 2009 problem was reported in FREEHOLD, NY. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 55 mph.

Mazda Mazda6 2009 Tires

Mazda Mazda6 2009 Tires Review #10493123

MAZDA MAZDA6 2009 car safety problem was reported on Jan 14, 2013.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with TIRES . tire pressure sensor failed while traveling down highway, when finally able to pull over tire was completely flat and ruined, valve stem fell apart in hand while trying to remove valve stem cap, this is the 3rd occurrence while owning this vehicle, very lucky this time that it was a back tire and not a front. each time that i have complained to dealership, i am told that the tire shops that are replacing my tires don't know what they are doing of which i disagree. i have seen many forums regarding this issue with mazda 3's and 6's, each time being told the tire shops don't know what they are doing. mazda needs to step up and acknowledge a poor design, come up with a better one and recall these bad tire sensor valves before someone is seriously injured or killed. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 62000 miles. Vehicle Identification Number (VIN):1YVHP82A595. Mazda Mazda6 2009 problem was reported in SMITHVILLE FLATS, NY. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 60 mph.

Mazda Mazda6 2009 Wheels

Mazda Mazda6 2009 Wheels Review #10493123

MAZDA MAZDA6 2009 car safety problem was reported on Jan 14, 2013.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with WHEELS . tire pressure sensor failed while traveling down highway, when finally able to pull over tire was completely flat and ruined, valve stem fell apart in hand while trying to remove valve stem cap, this is the 3rd occurrence while owning this vehicle, very lucky this time that it was a back tire and not a front. each time that i have complained to dealership, i am told that the tire shops that are replacing my tires don't know what they are doing of which i disagree. i have seen many forums regarding this issue with mazda 3's and 6's, each time being told the tire shops don't know what they are doing. mazda needs to step up and acknowledge a poor design, come up with a better one and recall these bad tire sensor valves before someone is seriously injured or killed. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 62000 miles. Vehicle Identification Number (VIN):1YVHP82A595. Mazda Mazda6 2009 problem was reported in SMITHVILLE FLATS, NY. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 60 mph.

Mazda Mazda6 2009 Engine And Engine Cooling

Mazda Mazda6 2009 Engine And Engine Cooling Review #10500753

MAZDA MAZDA6 2009 car safety problem was reported on Feb 25, 2013.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING . i heard chirping noise from the car and took it to a dealer who wasn't able to reproduce the noise but the noise came back and with in the next 10 days it got worse. the dealer told that there was a leakage from exhaust donut and exhaust heat shield had to be fixed. i got them fixed and after 3 days and less than 100 miles i hear the chirping noise again and this time it is louder. i can hear it even when the car is parked. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 43000 miles. Vehicle Identification Number (VIN):1YVHP82A795. Mazda Mazda6 2009 problem was reported in IRVING, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Tires Valve

Mazda Mazda6 2009 Tires Valve Review #10500914

MAZDA MAZDA6 2009 car safety problem was reported on Mar 01, 2013.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with TIRES:VALVE . valve stem sheared off of tire pressure sensor. i had the car serviced yesterday. during the oil change, the technician also inflated the tires to 32lbs each. today the tire pressure monitoring system indicated a low tire. passenger rear tire was 23.5 pounds. as i was putting air in the tire, the valve stem literally sheared off causing complete loss of air and a flat tire. i went to the dealer and the tire pressure sensor needed to be replaced. out of pocket cost: $130.78. upon inspection of the valve stem, galvanic corrosion can be clearly seen. photo available on request. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 92100 miles. Vehicle Identification Number (VIN):1YVHP82A795. Mazda Mazda6 2009 problem was reported in RALEIGH, NC. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Service Brakes

Mazda Mazda6 2009 Service Brakes Review #10502701

MAZDA MAZDA6 2009 car safety problem was reported on Mar 13, 2013.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES . tl* the contact owns a 2009 mazda mazda6. the contact stated that while attempting to engage the emergency brake, the release button fractured. the vehicle was taken to the dealer. the technician diagnosed that the emergency brake assembly needed to be replaced. the manufacturer was not made aware of the failure. the vehicle was not repaired. the vin was not available. the failure and current mileage was 49,000. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 49000 miles. Mazda Mazda6 2009 problem was reported in FAIRFAX, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2009 Structure Body Door

Mazda Mazda6 2009 Structure Body Door Review #10503682

MAZDA MAZDA6 2009 car safety problem was reported on Mar 19, 2013.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with STRUCTURE:BODY:DOOR . when i tried to get into my car the door got stuck and only open about 2 inches. when i finally opened it and got in the car the door would not close. when i checked it i realized that all 3 screws were missing and the door latch had shifted. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 45000 miles. Vehicle Identification Number (VIN):1YVHP82A695. Mazda Mazda6 2009 problem was reported in WILLINGBORO, NJ. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Latches/locks/linkages

Mazda Mazda6 2009 Latches/locks/linkages Review #10503682

MAZDA MAZDA6 2009 car safety problem was reported on Mar 19, 2013.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with LATCHES/LOCKS/LINKAGES . when i tried to get into my car the door got stuck and only open about 2 inches. when i finally opened it and got in the car the door would not close. when i checked it i realized that all 3 screws were missing and the door latch had shifted. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 45000 miles. Vehicle Identification Number (VIN):1YVHP82A695. Mazda Mazda6 2009 problem was reported in WILLINGBORO, NJ. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Latches/locks/linkages Doors Latch

Mazda Mazda6 2009 Latches/locks/linkages Doors Latch Review #10508051

MAZDA MAZDA6 2009 car safety problem was reported on July 02, 2012.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with LATCHES/LOCKS/LINKAGES:DOORS:LATCH . the door did not latch completely when i closed it after getting in the car. i opened the door back up and realized that all three screws that hold the latch in had fallen out. i inspected the passenger side as well and 1 was gone. updated 04/18/13*lj i went further and checked all of the screws in the car and realized that all of the screws were easy to remove. there was no adhesive on the screws to prevent them from backing out. fortunately, i discovered the door didn't latch in my garage and not while i was going down the road! *tr.0 person(s) were injured. 0 person(s) died.Mileage was 20000 miles. Vehicle Identification Number (VIN):1YVHP81A995. Mazda Mazda6 2009 problem was reported in MARTINEZ, GA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. Mazda Mazda6 2009 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Exterior Lighting

Mazda Mazda6 2009 Exterior Lighting Review #10513752

MAZDA MAZDA6 2009 car safety problem was reported on Feb 01, 2010.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with EXTERIOR LIGHTING . there seems to be an issue with the low beam headlight assemblies in the 2009 mazda6 vehicles. i have had both low beam headlights go out on me on two occasions while driving down the road. once both lamps needed to be replaced, the second time banging on the light cover got them to work again. i was told by the service manager at mazda to just bang on the light cover with my hand and it should come back on. the driver side headlight goes out often and to get it to come back on i have to bang on the light cover. i've put about 12 bulbs in the car. you find similar incidents on the web in mazda forums. also, you can see from the comments of a youtube video a friend of mine posted, it's common: http://www.youtube.com/watch?v=uqqperresa8 mazda says the headlights are working just fine and that there is no issue. i have never had to be told to bang on the light to make it work again bu a service technician. if it's that common, there is an issue. [xxx] information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6). *tr.0 person(s) were injured. 0 person(s) died.Mazda Mazda6 2009 problem was reported in FARIBAULT, MN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2009 Electrical System

Mazda Mazda6 2009 Electrical System Review #10513752

MAZDA MAZDA6 2009 car safety problem was reported on Feb 01, 2010.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with ELECTRICAL SYSTEM . there seems to be an issue with the low beam headlight assemblies in the 2009 mazda6 vehicles. i have had both low beam headlights go out on me on two occasions while driving down the road. once both lamps needed to be replaced, the second time banging on the light cover got them to work again. i was told by the service manager at mazda to just bang on the light cover with my hand and it should come back on. the driver side headlight goes out often and to get it to come back on i have to bang on the light cover. i've put about 12 bulbs in the car. you find similar incidents on the web in mazda forums. also, you can see from the comments of a youtube video a friend of mine posted, it's common: http://www.youtube.com/watch?v=uqqperresa8 mazda says the headlights are working just fine and that there is no issue. i have never had to be told to bang on the light to make it work again bu a service technician. if it's that common, there is an issue. [xxx] information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6). *tr.0 person(s) were injured. 0 person(s) died.Mazda Mazda6 2009 problem was reported in FARIBAULT, MN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2009 Structure Body Door

Mazda Mazda6 2009 Structure Body Door Review #10515258

MAZDA MAZDA6 2009 car safety problem was reported on Apr 07, 2013.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with STRUCTURE:BODY:DOOR . front drivers side would not close. upon checking all the screws holding the latch were missing. .0 person(s) were injured. 0 person(s) died.Mileage was 33852 miles. Vehicle Identification Number (VIN):1YVHP82A295. Mazda Mazda6 2009 problem was reported in NORFOLK, AL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. Mazda Mazda6 2009 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Fuel/propulsion System

Mazda Mazda6 2009 Fuel/propulsion System Review #10515031

MAZDA MAZDA6 2009 car safety problem was reported on May 28, 2013.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with FUEL/PROPULSION SYSTEM . tl* the contact owns a 2009 mazda, mazda 6. the contact noticed a large amount of gasoline leaking from the fuel tank. the vehicle was taken to an independent mechanic, who stated that the failure was contributed to a crack in the upper portion of the fuel tank. a temporary repair was performed. the vehicle was taken to an authorized dealer and repaired under nhtsa campaign id number: 11v134000 (fuel system, gasoline). the contact stated that the fuel tank replacement should have been included in the recall remedy. the manufacturer was made aware of the defect. the approximate failure mileage was 41,000. .0 person(s) were injured. 0 person(s) died.Mileage was 41000 miles. Vehicle Identification Number (VIN):1YVHPH1A595. Mazda Mazda6 2009 problem was reported in PHILADELPHIA, PA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2009 Structure Body

Mazda Mazda6 2009 Structure Body Review #10521830

MAZDA MAZDA6 2009 car safety problem was reported on June 10, 2013.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with STRUCTURE:BODY . driver side front door would not latch upon entry to the vehicle. inspection showed that all 4 screws were missing from the latch mechanism. inspection of the other 3 doors showed that up to 3 of the 4 screws were missing from them. every door had at least 1 missing screw. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 106000 miles. Vehicle Identification Number (VIN):1YVHP82A795. Mazda Mazda6 2009 problem was reported in GAITHERSBURG, MD. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Exterior Lighting

Mazda Mazda6 2009 Exterior Lighting Review #10531613

MAZDA MAZDA6 2009 car safety problem was reported on July 19, 2013.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with EXTERIOR LIGHTING . discovered excessive condensation following the outage of the right passenger low beam headlight. outage to the headlight renders the vehicle unsafe and unfit for driving in situations that require usage of headlights until repaired. condensation also observed in driver headlamp, however light is still currently functioning. resulting damage includes replacement of entire headlight structure and components due to water related damage and subsequent headlight failure. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 47000 miles. Mazda Mazda6 2009 problem was reported in MIDDLEBURG HEIGHTS, OH. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2009 Structure Body

Mazda Mazda6 2009 Structure Body Review #10535228

MAZDA MAZDA6 2009 car safety problem was reported on Aug 13, 2013.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with STRUCTURE:BODY . driver side front door would not latch, inspected to find all three door latch mounting screw were missing, and the door latch was falling down inside the door. very dangerous, and i was stranded in a parking lot with a driver door that could not be latched. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 72000 miles. Vehicle Identification Number (VIN):1YVHP80A495. Mazda Mazda6 2009 problem was reported in LIMINGTON, ME. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Tires Pressure Monitoring And Regulating Systems

Mazda Mazda6 2009 Tires Pressure Monitoring And Regulating Systems Review #10543301

MAZDA MAZDA6 2009 car safety problem was reported on Feb 28, 2013.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS . tire valve stem/tpms sensor broke while adding air to a customer's tire. *tr.Mileage was 69500 miles. Vehicle Identification Number (VIN):1YVHP81A495. Mazda Mazda6 2009 problem was reported in PLEASANTON, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Electrical System

Mazda Mazda6 2009 Electrical System Review #10544489

MAZDA MAZDA6 2009 car safety problem was reported on Sept 17, 2013.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with ELECTRICAL SYSTEM . my car alarm kept going off several times a day for months for no reason. i brought it into the dealership and they found that i had a bad door latch. could have been a safety issue if door could have come open while driving. warranty was up so i had to pay all costs to replace. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 41900 miles. Vehicle Identification Number (VIN):1YVHP82B795. Mazda Mazda6 2009 problem was reported in CAPE CORAL, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Electrical System Review #10556724

MAZDA MAZDA6 2009 car safety problem was reported on Dec 02, 2013.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with ELECTRICAL SYSTEM . 2009 mazda6. consumer writes in regards to automatic unlock button malfunction. *smd the consumer stated within the last year, the automatic unlock button inside the vehicle, suddenly stopped working, and in fact did the opposite of what it was supposed to do. when the unlock button was pressed, the entire vehicle automatically locked, and at times, would not release the lock, even manually. it would take many attempts at perfect timing to select the unlock button while opening the door in order to be able to get out of the vehicle. the automatic lock button functioned as it should, locking all doors. in other words, both the automatic lock and unlock buttons only locked the doors. the consumer stated she was locked inside the vehicle on several occasions, until she was able to get the door to release. the dealer identified the problem as the body control module for the locks. however, they could not offer a guarantee that the new body control module would not have the same problem, as mazda acknowledged a problem with the part. .Mazda Mazda6 2009 problem was reported in ST. MARYS, OH. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS.

Mazda Mazda6 2009 Latches/locks/linkages

Mazda Mazda6 2009 Latches/locks/linkages Review #10556724

MAZDA MAZDA6 2009 car safety problem was reported on Dec 02, 2013.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with LATCHES/LOCKS/LINKAGES . 2009 mazda6. consumer writes in regards to automatic unlock button malfunction. *smd the consumer stated within the last year, the automatic unlock button inside the vehicle, suddenly stopped working, and in fact did the opposite of what it was supposed to do. when the unlock button was pressed, the entire vehicle automatically locked, and at times, would not release the lock, even manually. it would take many attempts at perfect timing to select the unlock button while opening the door in order to be able to get out of the vehicle. the automatic lock button functioned as it should, locking all doors. in other words, both the automatic lock and unlock buttons only locked the doors. the consumer stated she was locked inside the vehicle on several occasions, until she was able to get the door to release. the dealer identified the problem as the body control module for the locks. however, they could not offer a guarantee that the new body control module would not have the same problem, as mazda acknowledged a problem with the part. .Mazda Mazda6 2009 problem was reported in ST. MARYS, OH. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS.

Mazda Mazda6 2009 Wheels

Mazda Mazda6 2009 Wheels Review #10557462

MAZDA MAZDA6 2009 car safety problem was reported on Dec 27, 2013.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with WHEELS . for the second time in a year the air valve on one of the tire pressure sensors on our mazda corroded and snapped off as i was putting air in the tire. i'm very grateful this happened while the car was in our driveway and not while my wife or daughter was driving the car. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 107000 miles. Vehicle Identification Number (VIN):1YVHP82A795. Mazda Mazda6 2009 problem was reported in RALEIGH, NC. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Tires Pressure Monitoring And Regulating Systems

Mazda Mazda6 2009 Tires Pressure Monitoring And Regulating Systems Review #10557462

MAZDA MAZDA6 2009 car safety problem was reported on Dec 27, 2013.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS . for the second time in a year the air valve on one of the tire pressure sensors on our mazda corroded and snapped off as i was putting air in the tire. i'm very grateful this happened while the car was in our driveway and not while my wife or daughter was driving the car. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 107000 miles. Vehicle Identification Number (VIN):1YVHP82A795. Mazda Mazda6 2009 problem was reported in RALEIGH, NC. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Exterior Lighting

Mazda Mazda6 2009 Exterior Lighting Review #10561548

MAZDA MAZDA6 2009 car safety problem was reported on Jan 23, 2014.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with EXTERIOR LIGHTING . defective headlight, low beams go out for no reason. if you hit the assembly the light comes back on. common problem for this vehicle, http://www.youtube.com/watch?v=uqqperresa8 . accident potential. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 55000 miles. Mazda Mazda6 2009 problem was reported in NEW IBERIA, LA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Wheels

Mazda Mazda6 2009 Wheels Review #10561611

MAZDA MAZDA6 2009 car safety problem was reported on Sept 10, 2010.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with WHEELS . i understand that the car isn't under warranty anymore; however, how was i supposed to know that my rim would crack as i'm driving. like i said a million times to so many people, i did not hit a curb, or a bump for the rim to crack. i have one rim issue and all the others are just fine. this is my rim story from the beginning to the end... in the week of august 15th-21st, 2010, the tire pressure warning light came on all of a sudden. i got nervous and i noticed my front-right tire was somewhat low. i went to pep boys to have air put into the tire. a few days later, the light appeared again and i went to another pep boys to have air put into the tire. the warning light disappeared after it was worked on. then the warning light appeared again after a couple of days and i went back to pep boys to have the front-right tire checked again. the young man said to me, "miss, there is a crack inside of your front-right rim." i made an appointment to another dealer who repairs rims and repair my rim. everything was fine after the rim was repaired. then i received a letter from mazda corporation about recalls. i had those done and the dealer said, "i need to get my tires checked again." i left the dealer and went to firestone and they repaired the cracked rim (2nd time). on january 11, 2014, my aunt and i returned from food shopping around 3pm. i parked the car at my aunt's house to unpack the food from the trunk. my aunt, cousin and i were getting some of the food out of the car, when all three of us heard air (whoooooosh) being blown out of a tire for about 20 seconds. we all stood still and looked to see which car the air was coming from. then my cousin look at my car said, "[xxx], do you know you have a flat?" i just could not believe this was happening again! when i saw the tire flat as a pancake and the rim touching the ground, i was shocked and upset. information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6). *tr.0 person(s) were injured. 0 person(s) died.Mileage was 110 miles. Mazda Mazda6 2009 problem was reported in BALTIMORE, MD. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2009 Service Brakes

Mazda Mazda6 2009 Service Brakes Review #10562241

MAZDA MAZDA6 2009 car safety problem was reported on Jan 09, 2014.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES . the check brake light came on. i found that there was very little break fluid. i took the vehicle to my mechanic and he determined that there was a hole in the break line created when it rubbed up against the engine. he said it was a design flaw and recommended that we take the car to the mazda dealership. the service manager was very understanding but could not make any judgment. he consulted with mazda corporate. corporate ruled that since it was not under warranty they were not responsible for replacement of the part. as a gesture of goodwill they paid for the part which was $73.28, and charged me $405.00 in labor to installation. to me, i would certainly like to get reimbursed my out of pocket expense. but more, so i would like to have this design flaw corrected so that someone doesn't killed when their brakes fail. i will be out of the country until feb. 17th. thank you *tr.0 person(s) were injured. 0 person(s) died.Mileage was 43400 miles. Vehicle Identification Number (VIN):1YVHP82BX95. Mazda Mazda6 2009 problem was reported in SEASIDE, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2009 Electrical System

Mazda Mazda6 2009 Electrical System Review #10564140

MAZDA MAZDA6 2009 car safety problem was reported on Jan 15, 2014.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with ELECTRICAL SYSTEM . driving through a tunnel my car began to fill with smoke. i pulled over and looked for where the smoke came from and found the switch to my heated seats was on fire. my car would no longer turn on. repair man at dealership says it's something that just happens i guess. somewhere something shorted. i'm just glad my child was not in the car when this happened. beware!! there are current recalls for the exact make and model in australia and europe for the same issue. i'm still waiting for the us the issue a recall so i can get my money back..Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Mileage was 91009 miles. Vehicle Identification Number (VIN):1YVHP82B295. Mazda Mazda6 2009 problem was reported in WASHINGTON, DC. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 60 mph.

Mazda Mazda6 2009 Seats

Mazda Mazda6 2009 Seats Review #10564140

MAZDA MAZDA6 2009 car safety problem was reported on Jan 15, 2014.MAZDA MAZDA6 2009, manufactured by MAZDA MOTOR CORP had a problem with SEATS . driving through a tunnel my car began to fill with smoke. i pulled over and looked for where the smoke came from and found the switch to my heated seats was on fire. my car would no longer turn on. repair man at dealership says it's something that just happens i guess. somewhere something shorted. i'm just glad my child was not in the car when this happened. beware!! there are current recalls for the exact make and model in australia and europe for the same issue. i'm still waiting for the us the issue a recall so i can get my money back..Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Mileage was 91009 miles. Vehicle Identification Number (VIN):1YVHP82B295. Mazda Mazda6 2009 problem was reported in WASHINGTON, DC. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 60 mph.

Mazda Mazda6 2009 Engine

Mazda Mazda6 2009 Engine Review #10577726

MAZDA MAZDA6 2009 car safety problem was reported on Mar 18, 2011.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with ENGINE . i bought my mazda 6, year 2009, brand new from a mazda dealer in virginia. some time ago, while i was driving it at approximately. 30 mph in heavy traffic on one of the main roads, i then turned on the left turn signal as i needed to make a left turn at the very next light. suddenly, the engine died completely and the car stopped in the middle of the traffic. luckily i was not hit by the drivers behind me. i was able to put the gear in park, start the engine again and drive the car home. i then called the mazda dealer (where i had bought the car) and i immediately made an appointment to have the car checked. to my greatest disappointment, the mazda dealership told me there was nothing wrong with my car and they could not find the cause of the problem i had on the road, when the engine died while i was driving my car. a few months later a similar problem happened again and the mazda dealer could not find any problem with it at that time either. now mazda has a recall for mazda 6, 2010-2012 only, but it's for the same problem with the spider's webs and possible risk of cracks in the fuel tank, with a risk of a fire. i'm concerned the year 2009 is not included in the recall since the same problem appeared in the earlier recall. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 2000 miles. Vehicle Identification Number (VIN):1YVHP81A595. Mazda Mazda6 2009 problem was reported in ALEXANDRIA, VA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 35 mph.

Mazda Mazda6 2009 Vehicle Speed Control

Mazda Mazda6 2009 Vehicle Speed Control Review #10577726

MAZDA MAZDA6 2009 car safety problem was reported on Mar 18, 2011.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with VEHICLE SPEED CONTROL . i bought my mazda 6, year 2009, brand new from a mazda dealer in virginia. some time ago, while i was driving it at approximately. 30 mph in heavy traffic on one of the main roads, i then turned on the left turn signal as i needed to make a left turn at the very next light. suddenly, the engine died completely and the car stopped in the middle of the traffic. luckily i was not hit by the drivers behind me. i was able to put the gear in park, start the engine again and drive the car home. i then called the mazda dealer (where i had bought the car) and i immediately made an appointment to have the car checked. to my greatest disappointment, the mazda dealership told me there was nothing wrong with my car and they could not find the cause of the problem i had on the road, when the engine died while i was driving my car. a few months later a similar problem happened again and the mazda dealer could not find any problem with it at that time either. now mazda has a recall for mazda 6, 2010-2012 only, but it's for the same problem with the spider's webs and possible risk of cracks in the fuel tank, with a risk of a fire. i'm concerned the year 2009 is not included in the recall since the same problem appeared in the earlier recall. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 2000 miles. Vehicle Identification Number (VIN):1YVHP81A595. Mazda Mazda6 2009 problem was reported in ALEXANDRIA, VA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 35 mph.

Mazda Mazda6 2009 Structure Body Door

Mazda Mazda6 2009 Structure Body Door Review #10578255

MAZDA MAZDA6 2009 car safety problem was reported on July 12, 2013.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with STRUCTURE:BODY:DOOR . the rod to the door handle inside the front passenger door fell in due to the recall that happened back in december 2013. the recall only replaced screws on the part that was still in the door. it did not cover the part that fell in because the screws fell out that hold the piece in. the door will not open from the outside without the rod attached. this is due to the first recall. we had no idea the screws fell out until the door would not open from the outside and we examined it. it should of been part of the original recall. this could create a situation where if there is an accident or issue and the passenger is not aware of what is going no one from the outside would be able to open the door to get them help or get them out. this should be a new recall. this should of been covered in the original recall and paid for by mazda to fix. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 50000 miles. Mazda Mazda6 2009 problem was reported in GRESHAM, OR. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2009 Exterior Lighting

Mazda Mazda6 2009 Exterior Lighting Review #10585410

MAZDA MAZDA6 2009 car safety problem was reported on Apr 01, 2014.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with EXTERIOR LIGHTING . low beam head lights do not work. high beam, fog and marker lights work fine. *js.0 person(s) were injured. 0 person(s) died.Mileage was 68000 miles. Vehicle Identification Number (VIN):1YVHP82A995. Mazda Mazda6 2009 problem was reported in OWENTON, KY. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. Mazda Mazda6 2009 drive type:FWD. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Air Bags

Mazda Mazda6 2009 Air Bags Review #10585803

MAZDA MAZDA6 2009 car safety problem was reported on Aug 22, 2013.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with AIR BAGS . the dashboard in my 2009 mazda6 passenger side is melting. the dashboard is sticky and a mess. it could probably be a hazard with my airbag. the dash is also very soft and the coloring comes off. *js.0 person(s) were injured. 0 person(s) died.Mileage was 30000 miles. Vehicle Identification Number (VIN):1YVHP81A795. Mazda Mazda6 2009 problem was reported in LAKE WORTH, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. Mazda Mazda6 2009 drive type:FWD.

Mazda Mazda6 2009 Structure

Mazda Mazda6 2009 Structure Review #10585841

MAZDA MAZDA6 2009 car safety problem was reported on May 01, 2014.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with STRUCTURE . melting dashboard on my mazda 6. i'm very unhappy about this. a recall needs to be made. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 76000 miles. Vehicle Identification Number (VIN):1YVHP82B795. Mazda Mazda6 2009 problem was reported in BOCA RATON, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Structure Review #10587035

MAZDA MAZDA6 2009 car safety problem was reported on Apr 30, 2014.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with STRUCTURE . i purchased the car at delray mazda in 2011. i immediately purchased a dashmat to protect the dashboard from cracking or fading. i saw a segment on the news about other owners of mazda, nissan and etc. that has a cracking, sticky dashboard as well. i was advised to contact you. my dashboard is sticky underneath the dashmat and in the area of just above the glovebox, the dash is falling off in clumps. it is a black cushiony material that is falling apart and also cracking where the dashmat doesn't reach. the dash is also very sticky as well. i will contact the dealership and mazda but would like this resolved. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 62000 miles. Vehicle Identification Number (VIN):1YVHP82H295. Mazda Mazda6 2009 problem was reported in LAKE WORTH, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2009 Electrical System

Mazda Mazda6 2009 Electrical System Review #10588570

MAZDA MAZDA6 2009 car safety problem was reported on May 15, 2013.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with ELECTRICAL SYSTEM . tl* the contact owns a 2009 mazda a6. the contact stated that while traveling 25 mph, the horn souned whenever a left or right turn was made. there were no repairs completed on the vehicle. the manfucturer was not notified. the failure mileage was 40,000 and current mileage 70,025. .0 person(s) were injured. 0 person(s) died.Mileage was 40000 miles. Vehicle Identification Number (VIN):1YVHP81AX95. Mazda Mazda6 2009 problem was reported in KISSIMMEE, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 25 mph.

Mazda Mazda6 2009 Communications Horn Assembly

Mazda Mazda6 2009 Communications Horn Assembly Review #10588570

MAZDA MAZDA6 2009 car safety problem was reported on May 15, 2013.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with COMMUNICATIONS:HORN ASSEMBLY . tl* the contact owns a 2009 mazda a6. the contact stated that while traveling 25 mph, the horn souned whenever a left or right turn was made. there were no repairs completed on the vehicle. the manfucturer was not notified. the failure mileage was 40,000 and current mileage 70,025. .0 person(s) were injured. 0 person(s) died.Mileage was 40000 miles. Vehicle Identification Number (VIN):1YVHP81AX95. Mazda Mazda6 2009 problem was reported in KISSIMMEE, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 25 mph.

Mazda Mazda6 2009 Structure Body

Mazda Mazda6 2009 Structure Body Review #10588581

MAZDA MAZDA6 2009 car safety problem was reported on June 20, 2013.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with STRUCTURE:BODY . tl* the contact owns a 2009 mazda a6. the contact stated that the dash board was melting. the manufacturer was contacted. the vehicle was not repaired. the failure mileage was 50,000 and the current 75,000..0 person(s) were injured. 0 person(s) died.Mileage was 50000 miles. Vehicle Identification Number (VIN):1YVHP81AX95. Mazda Mazda6 2009 problem was reported in KISSIMMEE, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2009 Steering Linkages Tie Rod Assembly

Mazda Mazda6 2009 Steering Linkages Tie Rod Assembly Review #10594603

MAZDA MAZDA6 2009 car safety problem was reported on May 28, 2014.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with STEERING:LINKAGES:TIE ROD ASSEMBLY . tl* the contact owns a 2009 mazda mazda6. the contact stated that while traveling 65 mph, the low tire pressure warning light illuminated and the vehicle veered to the left. as a result, the tire blew. the vehicle was taken to a private mechanic where it was diagnosed that the tie rod valves needed to be replaced. the manufacturer was not notified of the failure. the vehicle was repaired. the failure and current mileage was 88,000. .0 person(s) were injured. 0 person(s) died.Mileage was 88000 miles. Vehicle Identification Number (VIN):1YVHP80A795. Mazda Mazda6 2009 problem was reported in LAKEVILLE, MA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 65 mph.

Mazda Mazda6 2009 Structure

Mazda Mazda6 2009 Structure Review #10596663

MAZDA MAZDA6 2009 car safety problem was reported on May 01, 2014.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with STRUCTURE . my dash is melting on the passenger side. it's about a 10 inch section. it sticky and soft. it rubs off when touched. i've done some research and it appears there are a lot of people experiencing the same thing. i'm sure they will claim it's the armour all but i used that stuff very rarely and if it was something i have applied, it would be melting all over. it has to be a defect on mazdas part. i did email them but haven't heard back yet. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 60954 miles. Vehicle Identification Number (VIN):1YVHP82A195. Mazda Mazda6 2009 problem was reported in BREAUX BRIDGE, LA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Structure Review #10597226

MAZDA MAZDA6 2009 car safety problem was reported on Jan 30, 2014.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with STRUCTURE . the dashboard of my mazda is melting. the dashboard is shiny and sticky with a terrible glare. it looks like it is wet, but it is really gooey. i am worried the airbags may deploy prematurely or not at all. the damage to the dashboard is getting worse. i feel this is inferior workmanship and or materials and should be placed under recall. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 60000 miles. Vehicle Identification Number (VIN):1YVHP81A395. Mazda Mazda6 2009 problem was reported in PALM BAY, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Air Bags

Mazda Mazda6 2009 Air Bags Review #10597226

MAZDA MAZDA6 2009 car safety problem was reported on Jan 30, 2014.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with AIR BAGS . the dashboard of my mazda is melting. the dashboard is shiny and sticky with a terrible glare. it looks like it is wet, but it is really gooey. i am worried the airbags may deploy prematurely or not at all. the damage to the dashboard is getting worse. i feel this is inferior workmanship and or materials and should be placed under recall. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 60000 miles. Vehicle Identification Number (VIN):1YVHP81A395. Mazda Mazda6 2009 problem was reported in PALM BAY, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Air Bags Review #10597923

MAZDA MAZDA6 2009 car safety problem was reported on Feb 01, 2013.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with AIR BAGS . the airbag indicator (malfunction) light turns on and off intermittently for over a year. my car is out of warranty so the dealer will not service it without an expensive fee. i fear for my families safety because if the airbag is not operating properly it will be a life threatening injury to my family. i am under the impression that certain parts on vehicles should be serviced for a longer period of time, seat belts and airbags!. please investigate the matter and issue a recall. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 37000 miles. Mazda Mazda6 2009 problem was reported in LAREDO, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Structure

Mazda Mazda6 2009 Structure Review #10597925

MAZDA MAZDA6 2009 car safety problem was reported on Oct 01, 2013.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with STRUCTURE . the passenger side of my dashboard is melting. it is only occurring on the section closest to the window and for about 12 inches. i have tried to keep the windows open, use heat barriers/shields etc. it is even wet and gooey when the ac is on and i am driving. i have read that the plastics etc that are used in vehicles can emit cancerous odors/vapors/etc when they overheat. can this issue please be investigated as after reading the complaints this is a robust problem that can affect the safety of many people! *tr.0 person(s) were injured. 0 person(s) died.Mileage was 41000 miles. Mazda Mazda6 2009 problem was reported in LAREDO, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Latches/locks/linkages

Mazda Mazda6 2009 Latches/locks/linkages Review #10597927

MAZDA MAZDA6 2009 car safety problem was reported on Sept 02, 2013.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with LATCHES/LOCKS/LINKAGES . door lock actuator has failed!***the alarm on my mazda goes off at random periods of time. sometimes its once a week and sometimes is 5 times a day or night. i have reviewed several internet forums and it appears that there are a lot of people with the same problem but they have not created a complaint on this website. the remedies that they have found to have the dealer replace a door actuator that is faulty. this door actuator locks the doors and if when it fails to properly lock the door it will intermittently sound the alarm. the alarm is not so much the concern as much as the door lock actuator. it if fails to lock it creates a safety hazard for people as they are driving down the road the door could accidentally be opened. children could open the door and fall out of the car as it is failing. please look into this issue as it is a safety concern. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 40000 miles. Mazda Mazda6 2009 problem was reported in LAREDO, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Electrical System

Mazda Mazda6 2009 Electrical System Review #10597927

MAZDA MAZDA6 2009 car safety problem was reported on Sept 02, 2013.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with ELECTRICAL SYSTEM . door lock actuator has failed!***the alarm on my mazda goes off at random periods of time. sometimes its once a week and sometimes is 5 times a day or night. i have reviewed several internet forums and it appears that there are a lot of people with the same problem but they have not created a complaint on this website. the remedies that they have found to have the dealer replace a door actuator that is faulty. this door actuator locks the doors and if when it fails to properly lock the door it will intermittently sound the alarm. the alarm is not so much the concern as much as the door lock actuator. it if fails to lock it creates a safety hazard for people as they are driving down the road the door could accidentally be opened. children could open the door and fall out of the car as it is failing. please look into this issue as it is a safety concern. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 40000 miles. Mazda Mazda6 2009 problem was reported in LAREDO, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Power Train

Mazda Mazda6 2009 Power Train Review #10604517

MAZDA MAZDA6 2009 car safety problem was reported on Dec 11, 2013.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with POWER TRAIN . tl * the contact owns a 2009 mazda 6. the contact stated that while driving at unknown speeds, the vehicle accelerated and decelerated intermittently. the contact mentioned that the automatic transmission warning light illuminated. the vehicle was taken to a dealer. the technician was unable to diagnose the failure. the vehicle was not repaired. the manufacturer was not made aware of the failure. the failure mileage was not available and the current mileage was 31,000. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVHP82A695. Mazda Mazda6 2009 problem was reported in ROANOKE, VA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2009 Electrical System

Mazda Mazda6 2009 Electrical System Review #10606218

MAZDA MAZDA6 2009 car safety problem was reported on May 16, 2014.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with ELECTRICAL SYSTEM . the car's alarm system would be triggered randomly. in a period of 3 weeks it happened around 15 times. it ended up draining the car battery once. the alarm is on for few seconds and then it stops by itself. upon taking it to the mazda dealer they said it is a problem with door's electrical system and they had to replace the switches in all 4 doors. they were able to solve the problem, but i doubt if it is related to the recall that was made last september for fixing the door's latch system. the dealer had fixed the same just a back month. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 53000 miles. Vehicle Identification Number (VIN):1YVHP82A295. Mazda Mazda6 2009 problem was reported in SUNRISE, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Structure

Mazda Mazda6 2009 Structure Review #10606220

MAZDA MAZDA6 2009 car safety problem was reported on June 26, 2014.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with STRUCTURE . i see several complaints about a melting dashboard. the dashboard, especially on the passenger side has a softish material that almost melts when parked in outdoor under sun even for few minutes. in such a condition if i touch this part of dashboard it crumbles into pieces. it is almost impossible to always park under roof and this material used seems to be of very low quality. cost of fixing is unknown. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 53000 miles. Vehicle Identification Number (VIN):1YVHP82A295. Mazda Mazda6 2009 problem was reported in SUNRISE, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Fuel System, Gasoline

Mazda Mazda6 2009 Fuel System, Gasoline Review #10607356

MAZDA MAZDA6 2009 car safety problem was reported on June 24, 2014.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with FUEL SYSTEM, GASOLINE . tl* the contact owns a 2009 mazda mazda6. the contact stated that the check engine and check fuel cap warning lights illuminated. the vehicle was taken to the dealer who diagnosed that spider webs were developing in the fuel and canister vent lines. the technician advised that the webs needed to be removed, the canister valve and the canister vent lines needed to be replaced. the manufacturer was made aware of the failure who did not offer any assistance since the vehicle was not included in recall nhtsa campaign number: 11v134000 (fuel system, gasoline). the vehicle was not repaired. the failure and current mileage was 97,000. .0 person(s) were injured. 0 person(s) died.Mileage was 97000 miles. Vehicle Identification Number (VIN):1YVHP82B295. Mazda Mazda6 2009 problem was reported in HOWELL, NJ. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2009 Unknown Or Other

Mazda Mazda6 2009 Unknown Or Other Review #10615338

MAZDA MAZDA6 2009 car safety problem was reported on Mar 01, 2013.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with UNKNOWN OR OTHER . my front dashboard is melting. the dashboard is sticky to the touch and very shiny and reflects the suns glare..0 person(s) were injured. 0 person(s) died.Mileage was 80000 miles. Vehicle Identification Number (VIN):1YVHP82AX95. Mazda Mazda6 2009 problem was reported in LARGO, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Unknown Or Other Review #10616112

MAZDA MAZDA6 2009 car safety problem was reported on July 24, 2014.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with UNKNOWN OR OTHER . my 2009 mazda 6 also has a melting dashboard, causing a glare on the windshield.0 person(s) were injured. 0 person(s) died.Mileage was 52500 miles. Mazda Mazda6 2009 problem was reported in LAKE WORTH, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2009 Wheels

Mazda Mazda6 2009 Wheels Review #10616922

MAZDA MAZDA6 2009 car safety problem was reported on July 27, 2014.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with WHEELS . driving on i-94 west,near ann arbor, mi. felt vibration, then left rear tire blew. managed to pull to the shoulder and changed tire. inspected damaged tire and noticed valve stem and sensor were missing. the next day checked the other tires for proper inflation and when i tried to remove the valve cap from the right rear tire,it blew off with the core stem and the tire went flat. had both tires repaired,new sensors and tire. i had new tires installed on 1-11-14 and two sensors were changed at that time. so three out of the four sensors failed with one blown tire ..0 person(s) were injured. 0 person(s) died.Mileage was 53000 miles. Vehicle Identification Number (VIN):1YVHP81AX95. Mazda Mazda6 2009 problem was reported in SOUTH LYON, MI. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 68 mph.

Mazda Mazda6 2009 Unknown Or Other

Mazda Mazda6 2009 Unknown Or Other Review #10618329

MAZDA MAZDA6 2009 car safety problem was reported on July 02, 2012.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with UNKNOWN OR OTHER . the entire passenger side dashboard is gooey, sticky black. if you touch it it gets all over your hands, and everything will stick to it. it appears to be melting away. this started a few years ago. recently i noticed the rear headlights look as if they are warped from the inside, as if it was a melted candle..0 person(s) were injured. 0 person(s) died.Mileage was 40000 miles. Vehicle Identification Number (VIN):1YVHP82B695. Mazda Mazda6 2009 problem was reported in MIAMI, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Structure Body

Mazda Mazda6 2009 Structure Body Review #10618329

MAZDA MAZDA6 2009 car safety problem was reported on July 02, 2012.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with STRUCTURE:BODY . the entire passenger side dashboard is gooey, sticky black. if you touch it it gets all over your hands, and everything will stick to it. it appears to be melting away. this started a few years ago. recently i noticed the rear headlights look as if they are warped from the inside, as if it was a melted candle..0 person(s) were injured. 0 person(s) died.Mileage was 40000 miles. Vehicle Identification Number (VIN):1YVHP82B695. Mazda Mazda6 2009 problem was reported in MIAMI, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Exterior Lighting

Mazda Mazda6 2009 Exterior Lighting Review #10618329

MAZDA MAZDA6 2009 car safety problem was reported on July 02, 2012.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with EXTERIOR LIGHTING . the entire passenger side dashboard is gooey, sticky black. if you touch it it gets all over your hands, and everything will stick to it. it appears to be melting away. this started a few years ago. recently i noticed the rear headlights look as if they are warped from the inside, as if it was a melted candle..0 person(s) were injured. 0 person(s) died.Mileage was 40000 miles. Vehicle Identification Number (VIN):1YVHP82B695. Mazda Mazda6 2009 problem was reported in MIAMI, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Unknown Or Other

Mazda Mazda6 2009 Unknown Or Other Review #10618813

MAZDA MAZDA6 2009 car safety problem was reported on Aug 04, 2014.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with UNKNOWN OR OTHER . dashboard is melting vehicle is always parked under cover and out of direct sunlight. manufacturers not acknowledging as a defect..0 person(s) were injured. 0 person(s) died.Mileage was 92000 miles. Vehicle Identification Number (VIN):1YVHP82A395. Mazda Mazda6 2009 problem was reported in METAIRIE, LA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2009 Unknown Or Other Review #10620790

MAZDA MAZDA6 2009 car safety problem was reported on Feb 01, 2014.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with UNKNOWN OR OTHER . i just recently got this car. i am making payments on it. i noticed my dashboard melting and now its so bad that there is a glare in the middle of windshield. i cant see through it at times. and the material from the dashboard is melting now in drip lines down the dash. it is ugly and is ruining anything that touches it. kids try to dig holes in the dashboard and i'm scared that they might try to consume the goo that comes off the melting spot. my lawyer has informed me to file a complaint. i need a replacement dashboard as soon as possible. please help..0 person(s) were injured. 0 person(s) died.Mazda Mazda6 2009 problem was reported in CORPUS CHRISTI, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2009 Exterior Lighting

Mazda Mazda6 2009 Exterior Lighting Review #10621021

MAZDA MAZDA6 2009 car safety problem was reported on July 26, 2012.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with EXTERIOR LIGHTING . shortly after i purchased my vehicle (used) i noticed that my headlight on the passengers side was dimmer than the the other and while is was driving, the light would go on and off, i figured it just needed to be replaced, but if you bumped the light it would come back on and work for a few days and again would go through the same thing over again, this became to be a safety issue to me because i work at night and with this issue happening intermittently i figure id change the bulb and hope for the best. buib changed same issue continued, i researched this on numerous sights to see that other mazda owners where going thru the same problem, edmonds had people on their sight with the same issue, headlights are on the top for safety if you cant see or be seen the worst can happen. help us mazda6 owners..0 person(s) were injured. 0 person(s) died.Mileage was 37000 miles. Mazda Mazda6 2009 problem was reported in TORRANCE, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 65 mph.

Mazda Mazda6 2009 Unknown Or Other

Mazda Mazda6 2009 Unknown Or Other Review #10622230

MAZDA MAZDA6 2009 car safety problem was reported on Aug 14, 2014.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with UNKNOWN OR OTHER . the dashboard on the passenger side of my vehicle is melting and is very sticky all the time..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVHP81H595. Mazda Mazda6 2009 problem was reported in ROYAL PALM BEACH, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2009 Tires Pressure Monitoring And Regulating Systems

Mazda Mazda6 2009 Tires Pressure Monitoring And Regulating Systems Review #10626155

MAZDA MAZDA6 2009 car safety problem was reported on Aug 13, 2014.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS . while checking the air pressure in a customer's car the valve stem broke causing all air to escape from the tire and necessitating the purchase of a new tpms sensor..Mileage was 97387 miles. Vehicle Identification Number (VIN):1YVHP82BX95. Mazda Mazda6 2009 problem was reported in PLEASANTON, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Unknown Or Other

Mazda Mazda6 2009 Unknown Or Other Review #10626379

MAZDA MAZDA6 2009 car safety problem was reported on Aug 13, 2014.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with UNKNOWN OR OTHER . the passenger-side dashboard is melting. it is sticky to the touch and causes a shiny glare. .0 person(s) were injured. 0 person(s) died.Mileage was 61000 miles. Vehicle Identification Number (VIN):1YVHP81A395. Mazda Mazda6 2009 problem was reported in LINCOLNTON, NC. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2009 Unknown Or Other Review #10627862

MAZDA MAZDA6 2009 car safety problem was reported on Feb 06, 2014.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with UNKNOWN OR OTHER . the dash board is melting. it is sticky and there's seems to be nothing to do about it. i checked on recalls for the dash, but did not find any. i have had cars here is south florida for 40 something years....never had a problem like this. why is it not recalled? .0 person(s) were injured. 0 person(s) died.Mileage was 55000 miles. Vehicle Identification Number (VIN):1YVHP81A495. Mazda Mazda6 2009 problem was reported in PLANTATION, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2009 Visibility/wiper

Mazda Mazda6 2009 Visibility/wiper Review #10629322

MAZDA MAZDA6 2009 car safety problem was reported on May 01, 2014.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with VISIBILITY/WIPER . the dasboard of my 2009 mazda 6 is melting. it has become extremely sticky and shiny. the condition causes a glare on the windshield that can interfere with visibility. in addition, the dashboard deterioration is causing an oily film to build up on the entire inside of the windshield. the film has to be cleaned off frequently and is very difficult to completely remove. ordinary window cleaners just smear it. the film nterferes with the driver's ability to see in afternoon sun. i contacted mazda and they are aware of the problem. after i had it documented at the dealer, mazda agreed to pay for the part but would not pay for the cost of the labor, which is estimated at approximately $500..0 person(s) were injured. 0 person(s) died.Mileage was 47000 miles. Mazda Mazda6 2009 problem was reported in SARASOTA, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2009 Unknown Or Other

Mazda Mazda6 2009 Unknown Or Other Review #10633071

MAZDA MAZDA6 2009 car safety problem was reported on Sept 14, 2014.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with UNKNOWN OR OTHER . dash board is melting. i started noticing 1 side of dash was getting sticky, then it started melting slowly. it causes a very bad glare at times and makes it hard to see. i have contacted mazda and have brought it in to have it checked at the dealership and they confirmed it was melting. the material used one the dash is defective. since i am out of warranty the repair cost is on me? this should be a recall for defective material..0 person(s) were injured. 0 person(s) died.Mileage was 50000 miles. Vehicle Identification Number (VIN):1YHP82A95M1. Mazda Mazda6 2009 problem was reported in PALM HARBOR, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2009 Unknown Or Other Review #10638285

MAZDA MAZDA6 2009 car safety problem was reported on Sept 01, 2014.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with UNKNOWN OR OTHER . the top of the dashboard (only on passenger side) melted and became very reflectively shiny and sticky. i almost hit a pedestrian crossing at stop light as the reflected sun glare blinded my view..0 person(s) were injured. 0 person(s) died.Mileage was 20000 miles. Vehicle Identification Number (VIN):1YVHP81A795. Mazda Mazda6 2009 problem was reported in HONOLULU, HI. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 5 mph.

Mazda Mazda6 2009 Electrical System

Mazda Mazda6 2009 Electrical System Review #10638321

MAZDA MAZDA6 2009 car safety problem was reported on Sept 15, 2014.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with ELECTRICAL SYSTEM . i returned to my vehicle after work and the vehicle was dead except for the remote keyless entry and lights. the vehicle would not start and there was no accessory or on power. the dealer stated that the steering wheel lock and push button start had malfunctioned. i was qouted a repair bill of $1,660, which includes rore than $1,000 in parts (parts numbers gs3m-66-15xd and gsyd-67-5dzg ). these are basic systems that failed after only 31,000 miles of use on a vehicle that was maintained very well. .0 person(s) were injured. 0 person(s) died.Mileage was 31000 miles. Vehicle Identification Number (VIN):1YVHP82B495. Mazda Mazda6 2009 problem was reported in DAMASCUS, MD. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Steering

Mazda Mazda6 2009 Steering Review #10638321

MAZDA MAZDA6 2009 car safety problem was reported on Sept 15, 2014.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with STEERING . i returned to my vehicle after work and the vehicle was dead except for the remote keyless entry and lights. the vehicle would not start and there was no accessory or on power. the dealer stated that the steering wheel lock and push button start had malfunctioned. i was qouted a repair bill of $1,660, which includes rore than $1,000 in parts (parts numbers gs3m-66-15xd and gsyd-67-5dzg ). these are basic systems that failed after only 31,000 miles of use on a vehicle that was maintained very well. .0 person(s) were injured. 0 person(s) died.Mileage was 31000 miles. Vehicle Identification Number (VIN):1YVHP82B495. Mazda Mazda6 2009 problem was reported in DAMASCUS, MD. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Unknown Or Other

Mazda Mazda6 2009 Unknown Or Other Review #10641541

MAZDA MAZDA6 2009 car safety problem was reported on Oct 05, 2014.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with UNKNOWN OR OTHER . the passenger side dashboard above the glove compartment is starting to melt. there is a shiny residue on the dashboard that becomes very sticky upon contact. the affected area is also very soft to touch much like a cushion rather than the typical hard plastic feel of a traditional dashboard..0 person(s) were injured. 0 person(s) died.Mileage was 57337 miles. Vehicle Identification Number (VIN):1YVHP82A295. Mazda Mazda6 2009 problem was reported in SUNRISE, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Structure

Mazda Mazda6 2009 Structure Review #10641728

MAZDA MAZDA6 2009 car safety problem was reported on Dec 20, 2013.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with STRUCTURE . tl* the contact owns a 2009 mazda 6. the contact indicated that the dashboard was deteriorating. the contact noticed that there was a sticky substance leaking into the front passenger side near the windshield, the front driver side window, and the floorboard. the vehicle was not diagnosed or repaired. the manufacturer was notified. the approximate failure mileage was 36,000..0 person(s) were injured. 0 person(s) died.Mileage was 36000 miles. Vehicle Identification Number (VIN):1YVHP81A895. Mazda Mazda6 2009 problem was reported in CORPUS CHRISTI, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2009 Unknown Or Other

Mazda Mazda6 2009 Unknown Or Other Review #10642013

MAZDA MAZDA6 2009 car safety problem was reported on Aug 01, 2014.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with UNKNOWN OR OTHER . my passenger side dashboard is literally melting. mazda admits to having put a defective piece in my model vehicle however will not take responsibility and replace their faulty piece. they claim if it is a safety hazard there would be a recall..well there needs to be! i live in south florida and the sun reflecting off of the dash is flat out blinding and dangerous not to mention god knows what materials leaking into my air vents that my entire family is breathing in, being potentially hazardous. i don't think the national highway traffic safety administration should allow mazda should wait for accidents to occur and people to potentially get injured to take responsibility for this issue and fully replace the dash piece in the affected models. this issue has been called to the attention of the public in numerous news segments and online articles meaning hundreds of thousands of people are having the same issue and their lives could be in danger. a recall needs to be issued as soon as possible!.0 person(s) were injured. 0 person(s) died.Mileage was 65000 miles. Vehicle Identification Number (VIN):1YVHP81AX95. Mazda Mazda6 2009 problem was reported in CORAL SPRINGS, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2009 Unknown Or Other Review #10648293

MAZDA MAZDA6 2009 car safety problem was reported on Sept 01, 2013.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with UNKNOWN OR OTHER . the passenger side dashboard is literally melted to the point where the car is unsafe to operate during the day due to the reflection on the windshield. this is very unsafe and needs to be recalled! i have never seen or heard of a vehicle doing this and i'm appalled that the dealer has yet to remedy this issue..0 person(s) were injured. 0 person(s) died.Mileage was 38000 miles. Mazda Mazda6 2009 problem was reported in SAN ANTONIO, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Wheels

Mazda Mazda6 2009 Wheels Review #10648301

MAZDA MAZDA6 2009 car safety problem was reported on Oct 16, 2014.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with WHEELS . during normal use, valve stem broke halfway down the stem which required replacement of the valve stem and tire pressure sensor on that one wheel..0 person(s) were injured. 0 person(s) died.Mileage was 76080 miles. Vehicle Identification Number (VIN):1YVHP81H195. Mazda Mazda6 2009 problem was reported in WILDWOOD, MO. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Unknown Or Other

Mazda Mazda6 2009 Unknown Or Other Review #10649275

MAZDA MAZDA6 2009 car safety problem was reported on Mar 12, 2014.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with UNKNOWN OR OTHER . dashboard is melting and becoming shinny and sticky..0 person(s) were injured. 0 person(s) died.Mileage was 60000 miles. Mazda Mazda6 2009 problem was reported in SAN DIEGO, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2009 Unknown Or Other Review #10649462

MAZDA MAZDA6 2009 car safety problem was reported on Mar 01, 2014.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with UNKNOWN OR OTHER . my car alarm had been going off sporadically for about a year or more (maybe once a month), but it got progressively worse to the point that it would go off 3-5 days a week. i'd had my door latches inspected at the end of 2013 for a recall that although it wasn't electrical in nature, electrical issues could develop if it's not repaired. so, i was not expecting there to be any issues with them, but was surprised to learn that not one but both of my rear door actuators were defective. after getting that fixed the very day i picked up my vehicle from getting repairs i noticed my passenger side dashboard was shiny, and appeared to have been polished. i later learn that look actually came from the dashboard melting. now i have melting toxic material, that also can cause a glare, in my vehicle..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVHP82AX95. Mazda Mazda6 2009 problem was reported in PALMETTO, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2009 Electrical System

Mazda Mazda6 2009 Electrical System Review #10649462

MAZDA MAZDA6 2009 car safety problem was reported on Mar 01, 2014.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with ELECTRICAL SYSTEM . my car alarm had been going off sporadically for about a year or more (maybe once a month), but it got progressively worse to the point that it would go off 3-5 days a week. i'd had my door latches inspected at the end of 2013 for a recall that although it wasn't electrical in nature, electrical issues could develop if it's not repaired. so, i was not expecting there to be any issues with them, but was surprised to learn that not one but both of my rear door actuators were defective. after getting that fixed the very day i picked up my vehicle from getting repairs i noticed my passenger side dashboard was shiny, and appeared to have been polished. i later learn that look actually came from the dashboard melting. now i have melting toxic material, that also can cause a glare, in my vehicle..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVHP82AX95. Mazda Mazda6 2009 problem was reported in PALMETTO, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2009 Visibility/wiper

Mazda Mazda6 2009 Visibility/wiper Review #10651457

MAZDA MAZDA6 2009 car safety problem was reported on Oct 30, 2014.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with VISIBILITY/WIPER . the dashboard is melting and the mate black material has become sticky and shiny causing a glare on the windshield.0 person(s) were injured. 0 person(s) died.Mileage was 80000 miles. Vehicle Identification Number (VIN):1YVHP81A395. Mazda Mazda6 2009 problem was reported in HOMESTEAD, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2009 Unknown Or Other

Mazda Mazda6 2009 Unknown Or Other Review #10651457

MAZDA MAZDA6 2009 car safety problem was reported on Oct 30, 2014.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with UNKNOWN OR OTHER . the dashboard is melting and the mate black material has become sticky and shiny causing a glare on the windshield.0 person(s) were injured. 0 person(s) died.Mileage was 80000 miles. Vehicle Identification Number (VIN):1YVHP81A395. Mazda Mazda6 2009 problem was reported in HOMESTEAD, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2009 Electrical System

Mazda Mazda6 2009 Electrical System Review #10651616

MAZDA MAZDA6 2009 car safety problem was reported on Aug 18, 2014.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with ELECTRICAL SYSTEM . tl* the contact owns a 2009 mazda 6. the contact stated that the horn activated along with the door actuators failing intermittently. the contact used the key fob to turn off the alarm but it failed to remedy the failure. the vehicle was taken to an authorized dealer. the technician replaced the door actuator for the drivers side door. however, the failure recurred. the vehicle was taken back to the authorized dealer who indicated that the front drivers side and the rear drivers side door actuators needed to be replaced. the vehicle was repaired. the manufacturer was notified of the failure. the approximate failure mileage was 65,000. .0 person(s) were injured. 0 person(s) died.Mileage was 65000 miles. Vehicle Identification Number (VIN):1YVHP82A795. Mazda Mazda6 2009 problem was reported in EL PASO, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2009 Unknown Or Other

Mazda Mazda6 2009 Unknown Or Other Review #10654171

MAZDA MAZDA6 2009 car safety problem was reported on Oct 01, 2014.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with UNKNOWN OR OTHER . the dashboard on the passenger side is melting. it is sticky and mazda refuses to replace it..0 person(s) were injured. 0 person(s) died.Mazda Mazda6 2009 problem was reported in WALKER, LA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2009 Unknown Or Other Review #10654890

MAZDA MAZDA6 2009 car safety problem was reported on Nov 11, 2014.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with UNKNOWN OR OTHER . the passenger dash board has melted (passenger air bag side). also air bag light has turned on showing that the (air bag not on). .0 person(s) were injured. 0 person(s) died.Mazda Mazda6 2009 problem was reported in HOLLYWOOD, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2009 Exterior Lighting

Mazda Mazda6 2009 Exterior Lighting Review #10661465

MAZDA MAZDA6 2009 car safety problem was reported on Nov 28, 2014.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with EXTERIOR LIGHTING . the original factory bulbs of the tail light / brake light on both the driver and passenger sides of my 2009 mazda 6 touring are melting the red plastic inside the lens and becoming deformed. this is causing visibility issues for vehicles behind me as the light is shining through as white instead of red. the exterior lens is not damaged, just the interior lens closest to the bulbs. i have contacted the dealer where i purchased my car and no recalls have been issued for this problem. i believe this is a manufacturer design flaw that could lead to a fire and reduced brake light visibility for drivers driving behind me. .0 person(s) were injured. 0 person(s) died.Mileage was 125000 miles. Vehicle Identification Number (VIN):1YVHP82A295. Mazda Mazda6 2009 problem was reported in CONWAY, AR. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2009 Unknown Or Other

Mazda Mazda6 2009 Unknown Or Other Review #10676224

MAZDA MAZDA6 2009 car safety problem was reported on Jan 17, 2015.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with UNKNOWN OR OTHER . dashboard melting under normal driving and storage conditions. the dashboard of this vehicle is oozing a black tacky substance that shimmers in sunlight. the shimmer is reflected into the windshield resulting in an unsafe driving condition. .0 person(s) were injured. 0 person(s) died.Mileage was 78000 miles. Vehicle Identification Number (VIN):1YVHP81B695. Mazda Mazda6 2009 problem was reported in MELBOURNE, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2009 Visibility/wiper

Mazda Mazda6 2009 Visibility/wiper Review #10676224

MAZDA MAZDA6 2009 car safety problem was reported on Jan 17, 2015.MAZDA MAZDA6 2009, manufactured by Mazda Motor Corp. had a problem with VISIBILITY/WIPER . dashboard melting under normal driving and storage conditions. the dashboard of this vehicle is oozing a black tacky substance that shimmers in sunlight. the shimmer is reflected into the windshield resulting in an unsafe driving condition. .0 person(s) were injured. 0 person(s) died.Mileage was 78000 miles. Vehicle Identification Number (VIN):1YVHP81B695. Mazda Mazda6 2009 problem was reported in MELBOURNE, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.


Mazda Mazda6 2009 Systems


Air Bags 7 Review(s)

Air Bags Frontal Sensor/control Module 1 Review(s)

Communications Horn Assembly 1 Review(s)

Electrical System 12 Review(s)

Engine 1 Review(s)

Engine And Engine Cooling 3 Review(s)

Engine And Engine Cooling Cooling System 1 Review(s)

Engine And Engine Cooling Exhaust System 1 Review(s)

Equipment 1 Review(s)

Exterior Lighting 8 Review(s)

Fuel System, Gasoline 1 Review(s)

Fuel System, Gasoline Storage Tank Assembly 1 Review(s)

Fuel/propulsion System 1 Review(s)

Latches/locks/linkages 3 Review(s)

Latches/locks/linkages Doors Latch 3 Review(s)

Power Train 1 Review(s)

Power Train Automatic Transmission 2 Review(s)

Seats 1 Review(s)

Service Brakes 2 Review(s)

Service Brakes, Hydraulic 1 Review(s)

Steering 1 Review(s)

Steering Linkages Tie Rod Assembly 1 Review(s)

Structure 9 Review(s)

Structure Body 5 Review(s)

Structure Body Door 3 Review(s)

Structure Body Door Hinge And Attachments 1 Review(s)

Suspension Front Wheel Bearing 1 Review(s)

Tires 3 Review(s)

Tires Pressure Monitoring And Regulating Systems 5 Review(s)

Tires Valve 3 Review(s)

Unknown Or Other 19 Review(s)

Vehicle Speed Control 1 Review(s)

Visibility/wiper 3 Review(s)

Wheels 9 Review(s)



Search 1000s of Car Reviews, Recalls and Technical Bulletins
Start by entering a car model, system, manufacturer or any combination of keywords.


Mazda Mazda6 2009 Reports


My 2001 626 transmission slips slightly when first put it into drive from park then bucks. After it engages it shifts fine

I have a 1998 Mazda Protege LX Touring Edition (4dr) and need to install a rear-facing infant car seat (with base) in the back seat, preferably center position.  Because I purchased my Mazda used, I do not have the Owner's Manual.  I was told th

question is whiseling noise when take off

Sorry the question is for Tribute 2010 for whiseling noise when taking off

Today I backed up in a narrow parking lot and as I put my 2009 Mazda 6 in drive and with my foot still on the brake the car accelrated unexpectedly over about 10 feet and into a building, the engine revving and smoking as I put it in neutral and t

mazda3 2007 radio fuse location

my alt light came on and stayed so i disconnected the battery to see if the car would sat running and now both headlaights burnt out the tach is in op no and the air bag lamp stays on all the time what happened?

94 mazda 626 air bag ligt stays on after alt burnt out what is the problem

I REALLY THINK I HAVE THE ANSWER, I HOPE.  I have an 2002 Mazda tribute it stalls especially in hot weather.  The manual says very little, but it said it may be a vapor lock.  My car was parked inside a humid garage so when it stalls on me seas

Another really difficult thing to diagnose was the engine light, and warning bell sounding off for a yr. the dealer ship misdiagnosed the problem.  Charged me for a diagnostic test they did not do.  They sold me a battery, and sent me down the r

I can't find my Satellitte Radio Number, it appeared originally on my NAV Screen when I would depress the SAT button. It no longer appears. I don't know if that's a malfunction.
I have a 2008 Mazda CX-9 Grand touring with the Navigation touch s

 i have a 2002 millenia , would a 1998 automtic transmission work for car, denny.koch@insightbb.com

Discuss Mazda Mazda6


No comments have been provided.