Car-and-Safety.com

Mazda Mazda6 2003 Engine And Engine Cooling Exhaust System

Mazda Mazda6 2003 Engine And Engine Cooling Exhaust System Review #10021120

MAZDA MAZDA6 2003 car safety problem was reported on June 05, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING:EXHAUST SYSTEM . there is an odor coming from the exhaust. i have taken the car to the dealer two times for this, and they told me it was the gas i was buying. so i started buying gas out of town for a while, the odor continues. i have 12,000 miles on the car, and the odor keeps getting progressively worse. but the dealer keeps telling me it is the gas, and offers no help.*ak.Vehicle Identification Number (VIN):1YVHP80D635. Mazda Mazda6 2003 problem was reported in MCGEHEE, AR. Original Owner. Vehicle was purchased on Jan 06, 2003. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. DEALER'S NAME: PARKWAY MAZDA . DEALER'S TELEPHONE NUMBER: 501-217-9500 . DEALER'S CITY: LITTLE ROCK . DEALER'S STATE CODE: AR. DEALER'S ZIPCODE: 72211 .

Mazda Mazda6 2003 Electrical System

Mazda Mazda6 2003 Electrical System Review #10021122

MAZDA MAZDA6 2003 car safety problem was reported on June 05, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ELECTRICAL SYSTEM . i am experiencing problems on cold starts. the car will idle up to 2000 rpm, then idle all the way down and die. all of this will take place in about 5-6 seconds. the dealer told me that it was an aftermarket handsfree kit i had added to the car. but i purchased the car in january and had the kit added in late february, and had no problems up until a couple weeks ago (late may). the dealer unhooked the handsfree kit, because they said that the aftermarket product was the problem. after having the kit unhooked for about 2 weeks now, i still experience the problem. the kit is not even hooked into the cars wiring anywhere, it is wired onto the batter directly. the phone is not even in the kit while the car is starting, and the kit pulls no power unless the phone is in it..Vehicle Identification Number (VIN):1YVHP80D635. Mazda Mazda6 2003 problem was reported in MCGEHEE, AR. Vehicle was purchased on Jan 06, 2003. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. DEALER'S NAME: PARKWAY MAZDA . DEALER'S TELEPHONE NUMBER: 501-217-9500 . DEALER'S CITY: LITTLE ROCK . DEALER'S STATE CODE: AR. DEALER'S ZIPCODE: 72211 .

Mazda Mazda6 2003 Electrical System Ignition

Mazda Mazda6 2003 Electrical System Ignition Review #10025917

MAZDA MAZDA6 2003 car safety problem was reported on July 11, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ELECTRICAL SYSTEM:IGNITION . have a mazda 6 that continuously has the check engine light come on. had an incident where the car was failing to accelerate and waited for tow truck. that was the first time i took the car in for repair. waited 3 weeks before i could get my car back and when i got it back, it happened again 3 more times, and took it in for servicing all those times. i don't want to continue to make a trip to the dealer every month like i have been doing.*ak.0 person(s) were injured. 0 person(s) died.Mileage was 2200 miles. Vehicle Identification Number (VIN):1YVHP80D135. Mazda Mazda6 2003 problem was reported in OXFORD, PA. Original Owner. Vehicle was purchased on Apr 18, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: MAN . VEHICLE SPEED: 40 mph. DEALER'S NAME: BRANDYWINE MAZDA . DEALER'S TELEPHONE NUMBER: 6103395330 . DEALER'S CITY: WEST CHESTER . DEALER'S STATE CODE: PA. DEALER'S ZIPCODE: 19382 .

Mazda Mazda6 2003 Engine And Engine Cooling Engine

Mazda Mazda6 2003 Engine And Engine Cooling Engine Review #10031786

MAZDA MAZDA6 2003 car safety problem was reported on July 31, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING:ENGINE . while driving, the vehicle stalled. the dealer was aware of the problem. *ph since the vehicle was turned around leading to downhill, the vehicle restarted. two dealers didn't know what was wrong. the vehicle did not run at 8500 elevation. the consumer was left sideways in the road when there was hesitation. *scc *jb.Mileage was 6000 miles. Vehicle Identification Number (VIN):1YVFP80C535. Mazda Mazda6 2003 problem was reported in BARSTOW, CA. Original Owner. Vehicle was purchased on Apr 09, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 35 mph. DEALER'S NAME: MAZDA SAN BERNARDINO . DEALER'S CITY: SAN BERNARDINO . DEALER'S STATE CODE: CA.

Mazda Mazda6 2003 Suspension

Mazda Mazda6 2003 Suspension Review #10036853

MAZDA MAZDA6 2003 car safety problem was reported on Aug 20, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with SUSPENSION . there is a metallic "clunking" sound some where in the right front (and can sometimes be felt through the steering wheel) when making low speed, 90 degree turns. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVFP80CX35. Mazda Mazda6 2003 problem was reported in WESTBROOK, ME. Original Owner. Vehicle was purchased on Aug 19, 2003. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 35 mph.

Mazda Mazda6 2003 Latches/locks/linkages Doors Latch

Mazda Mazda6 2003 Latches/locks/linkages Doors Latch Review #10036929

MAZDA MAZDA6 2003 car safety problem was reported on Aug 29, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with LATCHES/LOCKS/LINKAGES:DOORS:LATCH . my four year old son got his finger caught in the door handle of my 2003 mazda6. the door handles differ from other handles in that a section of them pull out and then retract back.*ak.1 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVFP80C835. Mazda Mazda6 2003 problem was reported in CAYCE, SC. Original Owner. Vehicle was purchased on July 05, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 drive type:U. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 0 mph. DEALER'S NAME: WRAY . DEALER'S TELEPHONE NUMBER: 8037395181 . DEALER'S CITY: COLUMBIA . DEALER'S STATE CODE: SC. DEALER'S ZIPCODE: 29210 .

Mazda Mazda6 2003 Engine And Engine Cooling Engine

Mazda Mazda6 2003 Engine And Engine Cooling Engine Review #10037202

MAZDA MAZDA6 2003 car safety problem was reported on May 07, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING:ENGINE . the engine light and transmission light indicated a problem to me, as well as the car jerking upon acceleration. after taking the car to the dealer for service it was determined that knock sensor had malfunctioned. since the first visit to the dealership for service regarding this problem, it has happened 5 times. i have contacted my dealer and the manufacturer and am still dealing with this issue. my dealer has made no attempt to rectify the situation other than replacing the engine sensor over and over. the car was out of commision for over a week each time. i have gone to the dealer asking for their help in contacting mazda about a new engine and or car and they are completly uncooperative. *ak.Mileage was 13000 miles. Mazda Mazda6 2003 problem was reported in ELIZABETHTOWN, PA. Original Owner. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 30 mph. DEALER'S NAME: FAULKNER MAZDA . DEALER'S TELEPHONE NUMBER: 717-564-4545 . DEALER'S CITY: HARRISBURG . DEALER'S STATE CODE: PA. DEALER'S ZIPCODE: 17101 .

Mazda Mazda6 2003 Power Train Automatic Transmission

Mazda Mazda6 2003 Power Train Automatic Transmission Review #10037202

MAZDA MAZDA6 2003 car safety problem was reported on May 07, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . the engine light and transmission light indicated a problem to me, as well as the car jerking upon acceleration. after taking the car to the dealer for service it was determined that knock sensor had malfunctioned. since the first visit to the dealership for service regarding this problem, it has happened 5 times. i have contacted my dealer and the manufacturer and am still dealing with this issue. my dealer has made no attempt to rectify the situation other than replacing the engine sensor over and over. the car was out of commision for over a week each time. i have gone to the dealer asking for their help in contacting mazda about a new engine and or car and they are completly uncooperative. *ak.Mileage was 13000 miles. Mazda Mazda6 2003 problem was reported in ELIZABETHTOWN, PA. Original Owner. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 30 mph. DEALER'S NAME: FAULKNER MAZDA . DEALER'S TELEPHONE NUMBER: 717-564-4545 . DEALER'S CITY: HARRISBURG . DEALER'S STATE CODE: PA. DEALER'S ZIPCODE: 17101 .

Mazda Mazda6 2003 Electrical System

Mazda Mazda6 2003 Electrical System Review #10037202

MAZDA MAZDA6 2003 car safety problem was reported on May 07, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ELECTRICAL SYSTEM . the engine light and transmission light indicated a problem to me, as well as the car jerking upon acceleration. after taking the car to the dealer for service it was determined that knock sensor had malfunctioned. since the first visit to the dealership for service regarding this problem, it has happened 5 times. i have contacted my dealer and the manufacturer and am still dealing with this issue. my dealer has made no attempt to rectify the situation other than replacing the engine sensor over and over. the car was out of commision for over a week each time. i have gone to the dealer asking for their help in contacting mazda about a new engine and or car and they are completly uncooperative. *ak.Mileage was 13000 miles. Mazda Mazda6 2003 problem was reported in ELIZABETHTOWN, PA. Original Owner. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 30 mph. DEALER'S NAME: FAULKNER MAZDA . DEALER'S TELEPHONE NUMBER: 717-564-4545 . DEALER'S CITY: HARRISBURG . DEALER'S STATE CODE: PA. DEALER'S ZIPCODE: 17101 .

Mazda Mazda6 2003 Visibility Defroster/defogger System

Mazda Mazda6 2003 Visibility Defroster/defogger System Review #10037293

MAZDA MAZDA6 2003 car safety problem was reported on July 13, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with VISIBILITY:DEFROSTER/DEFOGGER SYSTEM . center defroster vent does not close completely. during humid or rainy conditions, the outside condensation can impare drivers view. if left unchecked the condensation can impare the middle 1/3 of the windshield.*ak.Mileage was 150 miles. Vehicle Identification Number (VIN):1YVHP80D135. Mazda Mazda6 2003 problem was reported in CASSELBERRY, FL. Original Owner. Vehicle was purchased on July 13, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 0 mph. DEALER'S NAME: CLASSIC MAZDA SOUTH OBT . DEALER'S TELEPHONE NUMBER: 407-851-8510 . DEALER'S CITY: ORLANDO . DEALER'S STATE CODE: FL. DEALER'S ZIPCODE: 32809 .

Mazda Mazda6 2003 Engine And Engine Cooling Exhaust System Emission Control Catalytic Convertor

Mazda Mazda6 2003 Engine And Engine Cooling Exhaust System Emission Control Catalytic Convertor Review #10037438

MAZDA MAZDA6 2003 car safety problem was reported on Sept 08, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR . sulfur (rotten egg) smell in vehicle cabin. dealer said no fix from mazda related to exhaust issue, several complaints, issue lasts up to 8k miles. car has less than 800 miles.*ak.Mileage was 700 miles. Mazda Mazda6 2003 problem was reported in CANTON, MI. Vehicle was purchased on Aug 20, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 0 mph. DEALER'S NAME: SESI LINCOLN . DEALER'S CITY: YPSILANTI . DEALER'S STATE CODE: MI.

Mazda Mazda6 2003 Suspension Front

Mazda Mazda6 2003 Suspension Front Review #10038958

MAZDA MAZDA6 2003 car safety problem was reported on Jan 15, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with SUSPENSION:FRONT . there is a "clunking" sound coming from the left front of the car that can be felt through the steering wheel when making slow turns while going over rain ditch..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVHP80CX35. Mazda Mazda6 2003 problem was reported in TWENTYNINE PALMS, CA. Original Owner. Vehicle was purchased on Jan 01, 2003. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 5 mph. DEALER'S NAME: MAZDA OF THE DESERT . DEALER'S TELEPHONE NUMBER: 7603280873 . DEALER'S CITY: CATHEDRAL CITY . DEALER'S STATE CODE: CA. DEALER'S ZIPCODE: 92234 .

Mazda Mazda6 2003 Engine And Engine Cooling Engine

Mazda Mazda6 2003 Engine And Engine Cooling Engine Review #10040443

MAZDA MAZDA6 2003 car safety problem was reported on Sept 22, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING:ENGINE . while driving vehicle stalled without warning. *ak.Mazda Mazda6 2003 problem was reported in MAMARONECK, NY. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2003 Electrical System Wiring

Mazda Mazda6 2003 Electrical System Wiring Review #10039601

MAZDA MAZDA6 2003 car safety problem was reported on May 24, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ELECTRICAL SYSTEM:WIRING . check engine light came on. car didn't have know pick up.took car to the dealer,they never told me what was wrong. .Mileage was 3413 miles. Vehicle Identification Number (VIN):1YVFP80C335. Mazda Mazda6 2003 problem was reported in PLAINFIELD, NJ. Original Owner. Vehicle was purchased on Jan 02, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. DEALER'S NAME: CRYSTAL AUTO MALL . DEALER'S TELEPHONE NUMBER: 1-732-968-1000 . DEALER'S CITY: GREENBROOK . DEALER'S STATE CODE: NJ. DEALER'S ZIPCODE: 08812 .

Mazda Mazda6 2003 Service Brakes, Air Antilock

Mazda Mazda6 2003 Service Brakes, Air Antilock Review #10040816

MAZDA MAZDA6 2003 car safety problem was reported on May 27, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES, AIR:ANTILOCK . brakes makes a hard grouding noise when coming to a complete stop. took to the dealer to have it looked at. the tech said he couldn't find anything. this happens every day.in aug 2003 there was a recall on the brakes. i took the car in so that they can look at it in august for the recall. the brakes are still making that noise..Mileage was 3413 miles. Vehicle Identification Number (VIN):1YVFP80C335. Mazda Mazda6 2003 problem was reported in PLAINFIELD, NJ. Original Owner. Vehicle was purchased on Jan 02, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. DEALER'S NAME: CRYSTAL AUTO MALL . DEALER'S TELEPHONE NUMBER: 1-732-968-1000 . DEALER'S CITY: GREENBROOK . DEALER'S ZIPCODE: 08812 .

Mazda Mazda6 2003 Suspension

Mazda Mazda6 2003 Suspension Review #10041998

MAZDA MAZDA6 2003 car safety problem was reported on Sept 29, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with SUSPENSION . when turning steering a grinding noise is produced.*ak.Mazda Mazda6 2003 problem was reported in SAN JOSE, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2003 Electrical System Ignition

Mazda Mazda6 2003 Electrical System Ignition Review #10042966

MAZDA MAZDA6 2003 car safety problem was reported on Sept 30, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ELECTRICAL SYSTEM:IGNITION . car does not have ignition lock system. after stopping car, turning off and removing key, car rolled backward while still in "drive" position causing damage to driver side back door. son was within inches of being slammed into concrete pole the car rolled into. *la .Vehicle was involved in a crash. 0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVHP80D235. Mazda Mazda6 2003 problem was reported in AUSTIN, TX. Accident was reported to Police. Original Owner. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Mazda Mazda6 2003 drive type:U. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 0 mph. DEALER'S NAME: MAZDA SOUTH .

Mazda Mazda6 2003 Engine And Engine Cooling Exhaust System Emission Control Catalytic Convertor

Mazda Mazda6 2003 Engine And Engine Cooling Exhaust System Emission Control Catalytic Convertor Review #10043664

MAZDA MAZDA6 2003 car safety problem was reported on Oct 27, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR . rotten egg smell from exaust. dealer showed me mazda's service bulliten which states it comes from higher sulfer gas, and will dissipate by 10,000 miles. now have almost 8,000 miles with no lessening of smell regardless of gas used. (slight improvement with amoco) someone inky had newer catlysts installed by mazda with good results. this should be done across the board for anyone with this problem.*ak.Mazda Mazda6 2003 problem was reported in ALEXANDRIA, VA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. DEALER'S NAME: BROWN'S MAZDA . DEALER'S CITY: ALEXANDRIA . DEALER'S STATE CODE: VA.

Mazda Mazda6 2003 Tires

Mazda Mazda6 2003 Tires Review #10048033

MAZDA MAZDA6 2003 car safety problem was reported on Nov 10, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with TIRES . rear driver's side tire blew out while driving at 60 mph. the rear inner side came out, consumer lost control of the vehicle, and vehicle ended on the shoulder of highway. michelin radial xse, p205/60r16-914 , dot# unknown. *ak.Vehicle Identification Number (VIN):1YVHP80C735. Mazda Mazda6 2003 problem was reported in OCEANPORT, NJ. Original Owner. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 60 mph.

Mazda Mazda6 2003 Power Train Automatic Transmission

Mazda Mazda6 2003 Power Train Automatic Transmission Review #10047089

MAZDA MAZDA6 2003 car safety problem was reported on Oct 18, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . the "new" vehicle had 900 unexplained mile on it upon purchase. within 4 months the check engine light came on and the vehicle kicks back when changing gears. took to dealer in pennsylvania, was advised that needed knock sensor replaced, but they did not have part. took the vehicle to dealer in virginia, did not look at it, although i told them what other dealership said, and told them there was a recall on it. took to different dealership and was advised that there are 2 recalls, and they were fixed. now the fan races minutes after the vehicle is off. also, the vehicle seems to be lacking in power despite the engine is 220 horse power. *la.Mileage was 13000 miles. Vehicle Identification Number (VIN):1YVFP80D935. Mazda Mazda6 2003 problem was reported in FREDERICKSBURG, VA. Original Owner. Vehicle was purchased on May 15, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Mazda Mazda6 2003 drive type:U. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 45 mph. DEALER'S NAME: MALLOY AUTO GROUP . DEALER'S CITY: WOODBRIDGE . DEALER'S STATE CODE: VA.

Mazda Mazda6 2003 Engine And Engine Cooling Engine

Mazda Mazda6 2003 Engine And Engine Cooling Engine Review #10047089

MAZDA MAZDA6 2003 car safety problem was reported on Oct 18, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING:ENGINE . the "new" vehicle had 900 unexplained mile on it upon purchase. within 4 months the check engine light came on and the vehicle kicks back when changing gears. took to dealer in pennsylvania, was advised that needed knock sensor replaced, but they did not have part. took the vehicle to dealer in virginia, did not look at it, although i told them what other dealership said, and told them there was a recall on it. took to different dealership and was advised that there are 2 recalls, and they were fixed. now the fan races minutes after the vehicle is off. also, the vehicle seems to be lacking in power despite the engine is 220 horse power. *la.Mileage was 13000 miles. Vehicle Identification Number (VIN):1YVFP80D935. Mazda Mazda6 2003 problem was reported in FREDERICKSBURG, VA. Original Owner. Vehicle was purchased on May 15, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Mazda Mazda6 2003 drive type:U. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 45 mph. DEALER'S NAME: MALLOY AUTO GROUP . DEALER'S CITY: WOODBRIDGE . DEALER'S STATE CODE: VA.

Mazda Mazda6 2003 Structure

Mazda Mazda6 2003 Structure Review #10049271

MAZDA MAZDA6 2003 car safety problem was reported on Dec 05, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with STRUCTURE . i purchased a 2003 mazda6 2 weeks ago, the car has been driven a total of 100 miles and has been covered since purchase. last night, i found rust around the weather strips in all 4 doors. i called mazda and apparently they knew about the problem for a while but did not address the problem before selling the car to me. the car has been on the dealer lot for 5 months and they never took care of that problem while it was sitting on the lot....i had to find and point the problem out to them. no one should have to pay money for a "new" vehicle with rust on it. *jb.0 person(s) were injured. 0 person(s) died.Mileage was 100 miles. Mazda Mazda6 2003 problem was reported in ALEXANDRIA, VA. Original Owner. Vehicle was purchased on Nov 24, 2003. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 0 mph. DEALER'S NAME: ROSENTHAL MAZDA .

Mazda Mazda6 2003 Structure Review #10049396

MAZDA MAZDA6 2003 car safety problem was reported on Aug 01, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with STRUCTURE . there is a rattling noise coming from the passenger side dash. i have taken the vehicle in 3 times, and the noise is still there. they replaced some padding and tightened a charcoal filter. it is very annoying having a brand new car with a loud rattle.*ak.0 person(s) were injured. 0 person(s) died.Mileage was 2000 miles. Vehicle Identification Number (VIN):1YVHP80D735. Mazda Mazda6 2003 problem was reported in NEWMARKET, NH. Original Owner. Vehicle was purchased on July 04, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: MAN . DEALER'S NAME: SEACOAST MAZDA . DEALER'S TELEPHONE NUMBER: 603-431-6811 . DEALER'S CITY: PORTSMOUTH . DEALER'S STATE CODE: NH.

Mazda Mazda6 2003 Visibility Windshield Wiper/washer

Mazda Mazda6 2003 Visibility Windshield Wiper/washer Review #10049398

MAZDA MAZDA6 2003 car safety problem was reported on Aug 01, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with VISIBILITY:WINDSHIELD WIPER/WASHER . windshield wipers do not go fast enough during heavy rains. the fastest speed is not enough to clear the water away for visibility. *ak .0 person(s) were injured. 0 person(s) died.Mileage was 100 miles. Vehicle Identification Number (VIN):1YVHP80D735. Mazda Mazda6 2003 problem was reported in NEWMARKET, NH. Original Owner. Vehicle was purchased on July 04, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Mazda Mazda6 2003 drive type:AWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: MAN . VEHICLE SPEED: 20 mph. DEALER'S NAME: SEACOAST MAZDA . DEALER'S TELEPHONE NUMBER: 603-431-6811 . DEALER'S CITY: PORTSMOUTH . DEALER'S STATE CODE: NH.

Mazda Mazda6 2003 Power Train Manual Transmission Floor Shift Assembly

Mazda Mazda6 2003 Power Train Manual Transmission Floor Shift Assembly Review #10049400

MAZDA MAZDA6 2003 car safety problem was reported on Nov 18, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:MANUAL TRANSMISSION:FLOOR SHIFT ASSEMBLY . 5-speed manual is very difficult to shift in lower gears. very noticeable when downshifting into 1st or 2nd gear. when very cold, you cannot get into 2nd gear when upshifting. have taken into dealer 3 times with them not being able to duplicate problem. *ak.0 person(s) were injured. 0 person(s) died.Mileage was 100 miles. Vehicle Identification Number (VIN):1YVHP80D735. Mazda Mazda6 2003 problem was reported in NEWMARKET, NH. Original Owner. Vehicle was purchased on July 04, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: MAN . VEHICLE SPEED: 20 mph. DEALER'S NAME: SEACOAST MAZDA . DEALER'S TELEPHONE NUMBER: 603-431-6811 . DEALER'S CITY: PORTSMOUTH . DEALER'S STATE CODE: NH.

Mazda Mazda6 2003 Engine And Engine Cooling Exhaust System Emission Control Catalytic Convertor

Mazda Mazda6 2003 Engine And Engine Cooling Exhaust System Emission Control Catalytic Convertor Review #10049453

MAZDA MAZDA6 2003 car safety problem was reported on Dec 09, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR . sulfur odor coming from car. i contacted the dealership within the first few months of ownership and they said it was because of the gasoline being used and it would eventually go away. well, now there is 26,000 miles on the vehicle and the smell is still evident, if not even worse.*ak.Mazda Mazda6 2003 problem was reported in BATTLE CREEK, MI. Original Owner. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. DEALER'S NAME: ERICH HENKEL MAZDA . DEALER'S TELEPHONE NUMBER: 2699652291 . DEALER'S CITY: BATTLE CREEK . DEALER'S STATE CODE: MI.

Mazda Mazda6 2003 Vehicle Speed Control

Mazda Mazda6 2003 Vehicle Speed Control Review #10050625

MAZDA MAZDA6 2003 car safety problem was reported on June 20, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with VEHICLE SPEED CONTROL . was left stranded when check engine light and at light came on. car would not accelerate above 20 mph and had some jerking. had car towed in. service dept replaced throttle body and sensor. car still repeatedly has a jerk/hesitation when holding steady between the speeds of 40mph and 50mph. have brought the car in three times for the jerking/hesitation and the service mechanic does not know what else to do. they tried redownloading the computer which worked for about 1 week and then the jerking/hesitation proceeded. my service dept has spoken to customer service of california and they say they have not heard of any of these problems with any other mazda 6's and they have no idea what it is. i have also experienced a water leak in my vehicle about a month after i bought it which flooded my whole passenger side. carpet had to be replaced. my brakes have a squeaky, grinding noise when turning. my back seat seams are coming unsewed. will have to get the fabric replaced. my question is, "what's next?" i have already recieved legal advice and my lawyer thinks i have a pretty good case. if nothing can be done, then why not replace the vehicle. i am fed up with spending my time at the mazda dealership. i bought a new vechicle to stay away from mechanical difficulities.*ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVFP80C735. Mazda Mazda6 2003 problem was reported in MARKSVILLE, LA. Original Owner. Vehicle was purchased on May 20, 2003. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 20 mph. DEALER'S NAME: HIXON AUTOPLEX . DEALER'S CITY: MARKSVILLE . DEALER'S STATE CODE: LA. DEALER'S ZIPCODE: 71351 .

Mazda Mazda6 2003 Structure Body Door Hinge And Attachments

Mazda Mazda6 2003 Structure Body Door Hinge And Attachments Review #10050671

MAZDA MAZDA6 2003 car safety problem was reported on Dec 15, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with STRUCTURE:BODY:DOOR:HINGE AND ATTACHMENTS . rust has begun to form under the weather stripping of the doors as well as on the sash on the right front door. car was purchased in march 2003. in a service bulletin (09-020/02) mazda north american operations claims it is not rust but a orange/yellow surface stain caused by negative reaction with a lubricant used at the factory. however the following email is from mazda operations stating it is indeed rust. so which is it? "october 22, 2003 owner nullunit2000" received the following e-mail from mazda and posted it in the rust problem topic at mazda6club.com. thank you for contacting mazda north american operations. i appreciate the opportunity to respond to you. mazda north american operations has become aware of a surface rust situation on the doors of certain mazda6 sedans built at the company's auto alliance international production facility in flat rock, michigan. when the door-sash weather-stripping is installed on the assembly line, a soapy water solution is used to ease installation of the stripping into a channel on the door. during the affected time period, that soapy solution was found to have included a substance that has caused surface rust to appear on the channel underneath the door weather-stripping on a number of vehicles. the solution has since been replaced, and vehicles built after july 22, 2003 are not affected. mazda is working on a service procedure to correct the situation and will be notifying owners of affected vehicles as soon as possible. please take a moment to give us your opinion about our e-mail service. click the link below to complete a brief, online survey. http://www.zoomerang.com/survey.zgi?f3tshlv0x57gc4nhrshlsh44 regards, lisa lasky" i certainly did not intend to purchase a car that will eventually rust through. please look into the matter.*ak.Vehicle Identification Number (VIN):1YVHP80D635. Mazda Mazda6 2003 problem was reported in ALHAMBRA, CA. Original Owner. Vehicle was purchased on Mar 01, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO.

Mazda Mazda6 2003 Wheels Rim

Mazda Mazda6 2003 Wheels Rim Review #10051757

MAZDA MAZDA6 2003 car safety problem was reported on Oct 26, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with WHEELS:RIM . heard rubbing noise from the rear end while driving. this was caused by 18" inch rims rubbing on the wheels. this could cause the tires to wear out or blow out, per the dealership. these were after market rims but were on the vehicle at time of purchase. the rims model name was le collection lm. *ak.Mileage was 500 miles. Vehicle Identification Number (VIN):1YVFP80C335. Mazda Mazda6 2003 problem was reported in EDMOND, OK. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO.

Mazda Mazda6 2003 Power Train Automatic Transmission

Mazda Mazda6 2003 Power Train Automatic Transmission Review #10050836

MAZDA MAZDA6 2003 car safety problem was reported on Dec 20, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . i have a 2003 mazda 6s with the automatic transmission. since it was new it made noises and did not feel as though it was shifting right. it hangs between gears and there is a considerable hesitation when accelerating. have had it to the dealer four times, went through the lemon law, and even though with the tech in the car i got the car to glitch and hang, he indicated normal operation. he insisted that the switch to synthetic transmission fluid is the culprit; however, quality of operation has decreased significantly since the dealer flushed the fluid and went back to conventional transmission fluid. *la.0 person(s) were injured. 0 person(s) died.Mileage was 700 miles. Vehicle Identification Number (VIN):1YVFP80D035. Mazda Mazda6 2003 problem was reported in WARREN, NJ. Vehicle was purchased on Apr 07, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 10 mph. DEALER'S NAME: CRYSTAL AUTO MALL .

Mazda Mazda6 2003 Fuel System, Other

Mazda Mazda6 2003 Fuel System, Other Review #10050936

MAZDA MAZDA6 2003 car safety problem was reported on Aug 29, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with FUEL SYSTEM, OTHER . i purchased the mazda6 i in late august of 2003, expecting at least roughly, the 25 - 32 mpg that was advertised on my car window. from the start i was getting 18-20 mpg regularly, i do a lot of city driving, but even when i drive on the highway, the highest it has ever been was 27-28 and thats putting 300 miles on it in one straight shot. i complained to a dealer in toledo when i had about 2200 miles on my car, and he told me that was normal for a break in period and to come back when i had 3500 miles on my car. i waited and waited, continuing to get the same poor gas mileage. finally, with 3800 miles on my car i sent an e-mail to the deal once again because i was still getting the same gas mileage. the dealer responded 3-5 days later (though the website said same day or next day response) and he said, that was normal and mazda doesn't consider that excessive. 23 - 29 was what was expected for my engine, but that was what was expected for the 6 cylinder, that i don't have. he was rude and couldn't take the time to read my email and respond with accurate information. i also complained to a different dealer near my hometown where i purchased the vehicle, and when i tried to describe the problem the lady asked me what i wanted them to do about it. why should i have to figure out the problem after i spend that much money on a new car? *ak.0 person(s) were injured. 0 person(s) died.Mazda Mazda6 2003 problem was reported in CENTERVILLE, OH. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2003 Air Bags

Mazda Mazda6 2003 Air Bags Review #10052157

MAZDA MAZDA6 2003 car safety problem was reported on Dec 11, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with AIR BAGS . while driving the driver lost control of the vehicle and hit a tree. the front, side, and rear air bags did not deploy. the driver sustained a broken arm and the vehicle was declared a total lost. please provide any additional information. *nm.Vehicle was involved in a crash. 1 person(s) were injured. Vehicle Identification Number (VIN):1YVHP80D335. Mazda Mazda6 2003 problem was reported in SILVER SPRING, MD. Accident was reported to Police. Original Owner. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO.

Mazda Mazda6 2003 Electrical System

Mazda Mazda6 2003 Electrical System Review #10051466

MAZDA MAZDA6 2003 car safety problem was reported on Dec 22, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ELECTRICAL SYSTEM . after having my 2003 mazda 6 for no more than a week, i noticed my air conditioner was not blowing out cold air. also, the air conditioner light shut off on any setting higher than "1". i took my vehicle into my dealer for service. i was told they would have to order a new switchboard for my dash. i waited a week for the part to come in. i was told the part may or may not be in within the next week. i became frustrated and picked up my car and asked the dealer to call me when the part came in. i waited for almost 2 months then received a letter in the mail stating my part had arrived. as i am part of the working class, i did not have a chance to respond back to the letter. i received another letter stating that if i did not make an appointment to have the part installed within 10 days, the dealer was required to send the part back to the manufacturer. i made my appointment. i was given yet another rental car. after replacing the part i waited so long to come in, i was informed that part did not fix the problem. i had to wait for another part to arrive. i was also informed that there were 3 recalls that consumers had not been informed of yet that the dealer was going to make an inspection of my vehicle to ensure the recalls were fixed. now, right before the new years holidays, i received a call from the dealer that they have to order a new gas tank for my vehicle and the part will be ordered and should arrive "within the next couple of days". i have been promised my vehicle next week. i am not holding my breathe. *ak .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVHP80C535. Mazda Mazda6 2003 problem was reported in KYLE, TX. Original Owner. Vehicle was purchased on Oct 12, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. DEALER'S NAME: MAZDA SOUTH . DEALER'S TELEPHONE NUMBER: 512-462-3131 . DEALER'S CITY: AUSTIN . DEALER'S STATE CODE: TX. DEALER'S ZIPCODE: 78745 .

Mazda Mazda6 2003 Fuel System, Diesel Storage Tank Assembly

Mazda Mazda6 2003 Fuel System, Diesel Storage Tank Assembly Review #10051466

MAZDA MAZDA6 2003 car safety problem was reported on Dec 22, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with FUEL SYSTEM, DIESEL:STORAGE:TANK ASSEMBLY . after having my 2003 mazda 6 for no more than a week, i noticed my air conditioner was not blowing out cold air. also, the air conditioner light shut off on any setting higher than "1". i took my vehicle into my dealer for service. i was told they would have to order a new switchboard for my dash. i waited a week for the part to come in. i was told the part may or may not be in within the next week. i became frustrated and picked up my car and asked the dealer to call me when the part came in. i waited for almost 2 months then received a letter in the mail stating my part had arrived. as i am part of the working class, i did not have a chance to respond back to the letter. i received another letter stating that if i did not make an appointment to have the part installed within 10 days, the dealer was required to send the part back to the manufacturer. i made my appointment. i was given yet another rental car. after replacing the part i waited so long to come in, i was informed that part did not fix the problem. i had to wait for another part to arrive. i was also informed that there were 3 recalls that consumers had not been informed of yet that the dealer was going to make an inspection of my vehicle to ensure the recalls were fixed. now, right before the new years holidays, i received a call from the dealer that they have to order a new gas tank for my vehicle and the part will be ordered and should arrive "within the next couple of days". i have been promised my vehicle next week. i am not holding my breathe. *ak .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVHP80C535. Mazda Mazda6 2003 problem was reported in KYLE, TX. Original Owner. Vehicle was purchased on Oct 12, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. DEALER'S NAME: MAZDA SOUTH . DEALER'S TELEPHONE NUMBER: 512-462-3131 . DEALER'S CITY: AUSTIN . DEALER'S STATE CODE: TX. DEALER'S ZIPCODE: 78745 .

Mazda Mazda6 2003 Suspension

Mazda Mazda6 2003 Suspension Review #10051672

MAZDA MAZDA6 2003 car safety problem was reported on .MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with SUSPENSION . consumer began to hear popping noises in the front end of the vehicle when turning the steering wheel. *la there was a pop noise in the front end when the vehicle sat for a while and when going from reverse to drive, the struts and mounts were noisy, the lower body fairing had come apart twice, and there was a grinding noise in the brakes due to the warped front brake rotors. *sc *jb.Vehicle Identification Number (VIN):1YVFP80D435. Mazda Mazda6 2003 problem was reported in LAS VEGAS, NV. Vehicle was purchased on July 28, 2003. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. DEALER'S NAME: PEOPLES . DEALER'S TELEPHONE NUMBER: 702 784 1111 . DEALER'S CITY: LAS VEGAS . DEALER'S STATE CODE: NV. DEALER'S ZIPCODE: 89149 .

Mazda Mazda6 2003 Service Brakes, Hydraulic Foundation Components Disc Rotor

Mazda Mazda6 2003 Service Brakes, Hydraulic Foundation Components Disc Rotor Review #10051672

MAZDA MAZDA6 2003 car safety problem was reported on .MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:ROTOR . consumer began to hear popping noises in the front end of the vehicle when turning the steering wheel. *la there was a pop noise in the front end when the vehicle sat for a while and when going from reverse to drive, the struts and mounts were noisy, the lower body fairing had come apart twice, and there was a grinding noise in the brakes due to the warped front brake rotors. *sc *jb.Vehicle Identification Number (VIN):1YVFP80D435. Mazda Mazda6 2003 problem was reported in LAS VEGAS, NV. Vehicle was purchased on July 28, 2003. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. DEALER'S NAME: PEOPLES . DEALER'S TELEPHONE NUMBER: 702 784 1111 . DEALER'S CITY: LAS VEGAS . DEALER'S STATE CODE: NV. DEALER'S ZIPCODE: 89149 .

Mazda Mazda6 2003 Structure Frame And Members Underbody Shields

Mazda Mazda6 2003 Structure Frame And Members Underbody Shields Review #10051672

MAZDA MAZDA6 2003 car safety problem was reported on .MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with STRUCTURE: FRAME AND MEMBERS:UNDERBODY SHIELDS . consumer began to hear popping noises in the front end of the vehicle when turning the steering wheel. *la there was a pop noise in the front end when the vehicle sat for a while and when going from reverse to drive, the struts and mounts were noisy, the lower body fairing had come apart twice, and there was a grinding noise in the brakes due to the warped front brake rotors. *sc *jb.Vehicle Identification Number (VIN):1YVFP80D435. Mazda Mazda6 2003 problem was reported in LAS VEGAS, NV. Vehicle was purchased on July 28, 2003. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. DEALER'S NAME: PEOPLES . DEALER'S TELEPHONE NUMBER: 702 784 1111 . DEALER'S CITY: LAS VEGAS . DEALER'S STATE CODE: NV. DEALER'S ZIPCODE: 89149 .

Mazda Mazda6 2003 Electrical System

Mazda Mazda6 2003 Electrical System Review #10053548

MAZDA MAZDA6 2003 car safety problem was reported on .MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ELECTRICAL SYSTEM . manufacturing problems with 2003 mazda 6 / auto alliance international facility. *mr there was rust on the door sashes of all four. the consumer's vehicle may be one of 46k assembled at the aai facility throughout july of 2003 that was potentially affected. the cd player/changer had become defective, there was a defective fuse access cover, there was a rattling in interior driver and passenger door panel while driving or when listening to music, and there was a rotten egg smell that had come from the exhaust which entered the cabin. *sc .Mileage was 4000 miles. Vehicle Identification Number (VIN):9999. Mazda Mazda6 2003 problem was reported in BLOOMINGTON, IL. Vehicle was purchased on Mar 11, 2003. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. DEALER'S NAME: SAM LEMAN MAZDA . DEALER'S CITY: BLOOMINGTON . DEALER'S STATE CODE: IL.

Mazda Mazda6 2003 Structure Body Door

Mazda Mazda6 2003 Structure Body Door Review #10053548

MAZDA MAZDA6 2003 car safety problem was reported on .MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with STRUCTURE:BODY:DOOR . manufacturing problems with 2003 mazda 6 / auto alliance international facility. *mr there was rust on the door sashes of all four. the consumer's vehicle may be one of 46k assembled at the aai facility throughout july of 2003 that was potentially affected. the cd player/changer had become defective, there was a defective fuse access cover, there was a rattling in interior driver and passenger door panel while driving or when listening to music, and there was a rotten egg smell that had come from the exhaust which entered the cabin. *sc .Mileage was 4000 miles. Vehicle Identification Number (VIN):9999. Mazda Mazda6 2003 problem was reported in BLOOMINGTON, IL. Vehicle was purchased on Mar 11, 2003. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. DEALER'S NAME: SAM LEMAN MAZDA . DEALER'S CITY: BLOOMINGTON . DEALER'S STATE CODE: IL.

Mazda Mazda6 2003 Engine And Engine Cooling Exhaust System Emission Control

Mazda Mazda6 2003 Engine And Engine Cooling Exhaust System Emission Control Review #10053548

MAZDA MAZDA6 2003 car safety problem was reported on .MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL . manufacturing problems with 2003 mazda 6 / auto alliance international facility. *mr there was rust on the door sashes of all four. the consumer's vehicle may be one of 46k assembled at the aai facility throughout july of 2003 that was potentially affected. the cd player/changer had become defective, there was a defective fuse access cover, there was a rattling in interior driver and passenger door panel while driving or when listening to music, and there was a rotten egg smell that had come from the exhaust which entered the cabin. *sc .Mileage was 4000 miles. Vehicle Identification Number (VIN):9999. Mazda Mazda6 2003 problem was reported in BLOOMINGTON, IL. Vehicle was purchased on Mar 11, 2003. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. DEALER'S NAME: SAM LEMAN MAZDA . DEALER'S CITY: BLOOMINGTON . DEALER'S STATE CODE: IL.

Mazda Mazda6 2003 Service Brakes, Hydraulic Foundation Components Disc Rotor

Mazda Mazda6 2003 Service Brakes, Hydraulic Foundation Components Disc Rotor Review #10054624

MAZDA MAZDA6 2003 car safety problem was reported on June 19, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:ROTOR . bought car new in mar. 03 and loved it. about three months later i started to hear squeal from front suspension/brakes when making slow left turns with brakes applies. have taken car to two different dealers that could not reproduce the problem. in dec. 03 same sound started happening when making left or right turns. also, brakes are now making high pitched squeals when coming to a stop with low to moderate pressure applied. one dealer said it was the dust shield and re-adjusted it, but did not solve problem. now dealer says that both problems may be related, but if its the pads or the rotors have to be replaced, i would have to pay to have them resurfaced or replaced. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVFP80CX35. Mazda Mazda6 2003 problem was reported in POMPTON LAKES, NJ. Original Owner. Vehicle was purchased on Mar 23, 2003. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. DEALER'S NAME: ROCKLAND AUTO PLAZA . DEALER'S TELEPHONE NUMBER: 845.627.3700 . DEALER'S CITY: NANUET . DEALER'S STATE CODE: NY. DEALER'S ZIPCODE: 10954 .

Mazda Mazda6 2003 Suspension Front Springs Leaf Spring Assembly U-bolt, Leaf Spring To Axle

Mazda Mazda6 2003 Suspension Front Springs Leaf Spring Assembly U-bolt, Leaf Spring To Axle Review #10054861

MAZDA MAZDA6 2003 car safety problem was reported on Jan 10, 2004.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with SUSPENSION:FRONT:SPRINGS:LEAF SPRING ASSEMBLY:U-BOLT, LEAF SPRING TO AXLE . i purchased my mazda 6s in february of 2003. i have loved this car since the day i first saw it. in december of 2003, i began hearing grinding/moaning sounds from the front suspension area when making slow turns into a parking space. this happened approximately 3-4 weekly. i took my 6s in for it's regular service in december (oil change and tire rotation), and advised my dealership of the noise i was hearing. i was told that my one front tire was 2 lbs low, and that is what caused the noise. the vehicle only had 12000 miles at this time, and i knew the service tech was sugar coating the problem. on january 9, 2004, i was leaving work to go home when i had some serious problems with my vehicle on the way home. as i was getting on the expressway, i experienced severe vibration in the steering wheel and also under the driver seat, along with the vehicle would not accelerate over 3,000 rpm no matter how hard i pressed the accelerator. i was terrified to drive this vehicle home in this condition, but i had no choice at this time. by the way the vehicle was acting, i thought i either had a flat tire or there was a problem with my engine. i took my vehicle the next day to the dealer, which it took them 4 days to confirm the problem. the concluded that my front axle was faulty, and needed to be replaced. it took 10 days to get my vehicle back, and so far the issue has been resolved. i just wish the dealer would have taken me more seriously back in december and maybe this problem could have been avoided. *la.0 person(s) were injured. 0 person(s) died.Mileage was 13253 miles. Vehicle Identification Number (VIN):1YVFP80D035. Mazda Mazda6 2003 problem was reported in AKRON, OH. Original Owner. Vehicle was purchased on Feb 03, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 10 mph. DEALER'S NAME: PARK MAZDA . DEALER'S TELEPHONE NUMBER: 3306457275 . DEALER'S CITY: AKRON . DEALER'S STATE CODE: OH. DEALER'S ZIPCODE: 44312 .

Mazda Mazda6 2003 Service Brakes, Air Disc Rotor

Mazda Mazda6 2003 Service Brakes, Air Disc Rotor Review #10056159

MAZDA MAZDA6 2003 car safety problem was reported on Nov 12, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES, AIR:DISC:ROTOR . brakes makes a grinding noise when stopping. .0 person(s) were injured. 0 person(s) died.Mileage was 7800 miles. Vehicle Identification Number (VIN):1YVFP80C335. Mazda Mazda6 2003 problem was reported in PLAINFIELD, NJ. Original Owner. Vehicle was purchased on Jan 02, 2003. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 5 mph. DEALER'S NAME: CRYSTAL AUTO MALL . DEALER'S TELEPHONE NUMBER: 1-732-968-1000 . DEALER'S CITY: GREENBROOK . DEALER'S STATE CODE: NJ. DEALER'S ZIPCODE: 08812 .

Mazda Mazda6 2003 Service Brakes, Air Disc Pads

Mazda Mazda6 2003 Service Brakes, Air Disc Pads Review #10056159

MAZDA MAZDA6 2003 car safety problem was reported on Nov 12, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES, AIR:DISC:PADS . brakes makes a grinding noise when stopping. .0 person(s) were injured. 0 person(s) died.Mileage was 7800 miles. Vehicle Identification Number (VIN):1YVFP80C335. Mazda Mazda6 2003 problem was reported in PLAINFIELD, NJ. Original Owner. Vehicle was purchased on Jan 02, 2003. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 5 mph. DEALER'S NAME: CRYSTAL AUTO MALL . DEALER'S TELEPHONE NUMBER: 1-732-968-1000 . DEALER'S CITY: GREENBROOK . DEALER'S STATE CODE: NJ. DEALER'S ZIPCODE: 08812 .

Mazda Mazda6 2003 Service Brakes, Air Supply Hoses, Lines/piping, And Fittings

Mazda Mazda6 2003 Service Brakes, Air Supply Hoses, Lines/piping, And Fittings Review #10056160

MAZDA MAZDA6 2003 car safety problem was reported on Dec 06, 2004.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES, AIR:SUPPLY:HOSES, LINES/PIPING, AND FITTINGS . brakes still grinding when stopping. another new set of brakes was put on.dealer stated the the brake line was broke..0 person(s) were injured. 0 person(s) died.Mileage was 8903 miles. Vehicle Identification Number (VIN):1YVFP80C335. Mazda Mazda6 2003 problem was reported in PLAINFIELD, NJ. Original Owner. Vehicle was purchased on Jan 02, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 5 mph. DEALER'S NAME: CRYSTAL AUTO MALL . DEALER'S TELEPHONE NUMBER: 1-732-968-1000 . DEALER'S CITY: GREENBROOK . DEALER'S STATE CODE: NJ. DEALER'S ZIPCODE: 08812 .

Mazda Mazda6 2003 Service Brakes, Air Disc Pads

Mazda Mazda6 2003 Service Brakes, Air Disc Pads Review #10056160

MAZDA MAZDA6 2003 car safety problem was reported on Dec 06, 2004.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES, AIR:DISC:PADS . brakes still grinding when stopping. another new set of brakes was put on.dealer stated the the brake line was broke..0 person(s) were injured. 0 person(s) died.Mileage was 8903 miles. Vehicle Identification Number (VIN):1YVFP80C335. Mazda Mazda6 2003 problem was reported in PLAINFIELD, NJ. Original Owner. Vehicle was purchased on Jan 02, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 5 mph. DEALER'S NAME: CRYSTAL AUTO MALL . DEALER'S TELEPHONE NUMBER: 1-732-968-1000 . DEALER'S CITY: GREENBROOK . DEALER'S STATE CODE: NJ. DEALER'S ZIPCODE: 08812 .

Mazda Mazda6 2003 Service Brakes, Air Controls Foot Control

Mazda Mazda6 2003 Service Brakes, Air Controls Foot Control Review #10056161

MAZDA MAZDA6 2003 car safety problem was reported on Jan 07, 2004.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES, AIR:CONTROLS:FOOT CONTROL . still hearing the brakes grinding noise when stopping. went back to the dealer, it was heard by the master tech there at the dealer. he stated that mazda was looking into a solutions..0 person(s) were injured. 0 person(s) died.Mileage was 9000 miles. Vehicle Identification Number (VIN):1YVFP80C335. Mazda Mazda6 2003 problem was reported in PLAINFIELD, NJ. Original Owner. Vehicle was purchased on Jan 02, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 5 mph. DEALER'S NAME: CRYSTAL AUTO MALL . DEALER'S TELEPHONE NUMBER: 1-732-968-1000 . DEALER'S CITY: GREENBROOK . DEALER'S STATE CODE: NJ. DEALER'S ZIPCODE: 08812 .

Mazda Mazda6 2003 Service Brakes, Hydraulic Foundation Components Disc Pads

Mazda Mazda6 2003 Service Brakes, Hydraulic Foundation Components Disc Pads Review #10058285

MAZDA MAZDA6 2003 car safety problem was reported on Feb 16, 2004.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:PADS . 2003 mazda 6 2.3l a/t with 10,450 miles: right front disc brake component(s) failure. took the car to a mazda service center and was told a special repair kit was required but that mazda was only authorizing the dealers to repair this under warrenty, on a case-by-case basis. i have not experienced brake failure at this time, and i have scheduled service to examine and repair. *ak.0 person(s) were injured. 0 person(s) died.Mileage was 10460 miles. Mazda Mazda6 2003 problem was reported in GOODYEAR, AZ. Vehicle was purchased on June 23, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 75 mph.

Mazda Mazda6 2003 Tires

Mazda Mazda6 2003 Tires Review #10059210

MAZDA MAZDA6 2003 car safety problem was reported on Dec 01, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with TIRES . while driving at 45mph consumer's vehicle was hit from behind, causing it to rear end another vehicle. upon impact, both frontal air bags did not deploy. driver sustained minor injuries. *ak prior to accident, left front tire kept loosing air. dealer re-beaded it but didn't found anything wrong with the tire. dealer told consumer to come back if tires still losses air. *la .Vehicle was involved in a crash. 1 person(s) were injured. Mileage was 2300 miles. Vehicle Identification Number (VIN):1YVHP80C735. Mazda Mazda6 2003 problem was reported in BAYONNE, NJ. Accident was reported to Police. Vehicle was purchased on Sept 01, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 45 mph. DEALER'S NAME: MAXXON UNION . DEALER'S CITY: UNION . DEALER'S STATE CODE: NJ.

Mazda Mazda6 2003 Air Bags

Mazda Mazda6 2003 Air Bags Review #10059210

MAZDA MAZDA6 2003 car safety problem was reported on Dec 01, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with AIR BAGS . while driving at 45mph consumer's vehicle was hit from behind, causing it to rear end another vehicle. upon impact, both frontal air bags did not deploy. driver sustained minor injuries. *ak prior to accident, left front tire kept loosing air. dealer re-beaded it but didn't found anything wrong with the tire. dealer told consumer to come back if tires still losses air. *la .Vehicle was involved in a crash. 1 person(s) were injured. Mileage was 2300 miles. Vehicle Identification Number (VIN):1YVHP80C735. Mazda Mazda6 2003 problem was reported in BAYONNE, NJ. Accident was reported to Police. Vehicle was purchased on Sept 01, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 45 mph. DEALER'S NAME: MAXXON UNION . DEALER'S CITY: UNION . DEALER'S STATE CODE: NJ.

Mazda Mazda6 2003 Power Train Automatic Transmission

Mazda Mazda6 2003 Power Train Automatic Transmission Review #10058576

MAZDA MAZDA6 2003 car safety problem was reported on Feb 19, 2004.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . violent shifting from 1st to 2nd gear in the mazda6s with automatic transmission. feels as if the car has been hit by another vehicle from the rear. front tires momentarily lose traction and chirp sometimes. these violent shifts only happen during mild accelleration. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVFP80D235. Mazda Mazda6 2003 problem was reported in MANASSAS, VA. Vehicle was purchased on May 03, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 20 mph. DEALER'S NAME: MALLOY HUNDAI MAZDA KIA . DEALER'S TELEPHONE NUMBER: 703-490-8170 . DEALER'S CITY: WOODBRIDGE . DEALER'S STATE CODE: VA. DEALER'S ZIPCODE: 22191 .

Mazda Mazda6 2003 Service Brakes, Hydraulic

Mazda Mazda6 2003 Service Brakes, Hydraulic Review #10058635

MAZDA MAZDA6 2003 car safety problem was reported on Oct 05, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES, HYDRAULIC . we bought our new 2003 mazda 6 in july 2003. few months later my wife noted a loud scraping/grinding noise from the front end when making sharp slow left or right turns with brakes applied. the noise also occurred when pulling into a parking space. this happened 3-4 times weekly. finally , we brought the car into the dealership at least 3 times for the problem, but the noise could not be reproduced consistently. a engine belt was replaced in 12/03, but the problem persisted. during the last visit in 2/14/04 to the dealer, we were told that the brakes could be at fault and mazda is looking for a solution. *jb.0 person(s) were injured. 0 person(s) died.Mileage was 2400 miles. Vehicle Identification Number (VIN):1YVFP80C235. Mazda Mazda6 2003 problem was reported in DORCHESTER, MA. Vehicle was purchased on July 01, 2003. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 5 mph. DEALER'S NAME: QUIRK MAZDA . DEALER'S TELEPHONE NUMBER: (617)773-8000 . DEALER'S CITY: QUINCY . DEALER'S STATE CODE: MA. DEALER'S ZIPCODE: 02169 .

Mazda Mazda6 2003 Equipment Electrical Radio/tape Deck/cd Etc.

Mazda Mazda6 2003 Equipment Electrical Radio/tape Deck/cd Etc. Review #10059432

MAZDA MAZDA6 2003 car safety problem was reported on .MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC. . it was stated that the consumer's vehicle has the presence of rust on the door sashes of all four doors. *la within eight months of owning the vehicle, there were other problems such as a defective cd player, a persistent sulfurous smell coming from the exhaust which entered the vehicle, a defective fuse access cover and the removal of the interior driver and passenger door panels to remedy a rattling noise when driving. *jb.Vehicle Identification Number (VIN):1YVHP80D835. Mazda Mazda6 2003 problem was reported in BLOOMINGTON, IL. Vehicle was purchased on Mar 11, 2003. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: MAN . DEALER'S NAME: SAM LEMAN MAZDA . DEALER'S CITY: BLOOMINGTON . DEALER'S STATE CODE: IL.

Mazda Mazda6 2003 Engine And Engine Cooling Exhaust System

Mazda Mazda6 2003 Engine And Engine Cooling Exhaust System Review #10059432

MAZDA MAZDA6 2003 car safety problem was reported on .MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING:EXHAUST SYSTEM . it was stated that the consumer's vehicle has the presence of rust on the door sashes of all four doors. *la within eight months of owning the vehicle, there were other problems such as a defective cd player, a persistent sulfurous smell coming from the exhaust which entered the vehicle, a defective fuse access cover and the removal of the interior driver and passenger door panels to remedy a rattling noise when driving. *jb.Vehicle Identification Number (VIN):1YVHP80D835. Mazda Mazda6 2003 problem was reported in BLOOMINGTON, IL. Vehicle was purchased on Mar 11, 2003. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: MAN . DEALER'S NAME: SAM LEMAN MAZDA . DEALER'S CITY: BLOOMINGTON . DEALER'S STATE CODE: IL.

Mazda Mazda6 2003 Unknown Or Other

Mazda Mazda6 2003 Unknown Or Other Review #10059432

MAZDA MAZDA6 2003 car safety problem was reported on .MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with UNKNOWN OR OTHER . it was stated that the consumer's vehicle has the presence of rust on the door sashes of all four doors. *la within eight months of owning the vehicle, there were other problems such as a defective cd player, a persistent sulfurous smell coming from the exhaust which entered the vehicle, a defective fuse access cover and the removal of the interior driver and passenger door panels to remedy a rattling noise when driving. *jb.Vehicle Identification Number (VIN):1YVHP80D835. Mazda Mazda6 2003 problem was reported in BLOOMINGTON, IL. Vehicle was purchased on Mar 11, 2003. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: MAN . DEALER'S NAME: SAM LEMAN MAZDA . DEALER'S CITY: BLOOMINGTON . DEALER'S STATE CODE: IL.

Mazda Mazda6 2003 Structure Body Door

Mazda Mazda6 2003 Structure Body Door Review #10059432

MAZDA MAZDA6 2003 car safety problem was reported on .MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with STRUCTURE:BODY:DOOR . it was stated that the consumer's vehicle has the presence of rust on the door sashes of all four doors. *la within eight months of owning the vehicle, there were other problems such as a defective cd player, a persistent sulfurous smell coming from the exhaust which entered the vehicle, a defective fuse access cover and the removal of the interior driver and passenger door panels to remedy a rattling noise when driving. *jb.Vehicle Identification Number (VIN):1YVHP80D835. Mazda Mazda6 2003 problem was reported in BLOOMINGTON, IL. Vehicle was purchased on Mar 11, 2003. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: MAN . DEALER'S NAME: SAM LEMAN MAZDA . DEALER'S CITY: BLOOMINGTON . DEALER'S STATE CODE: IL.

Mazda Mazda6 2003 Power Train Automatic Transmission

Mazda Mazda6 2003 Power Train Automatic Transmission Review #10058968

MAZDA MAZDA6 2003 car safety problem was reported on Oct 30, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . there is something wrong with the transmission as if it does not know which gear it sould be in. there is a sevre bucking from 1st into 2nd gear where the tires chirp and the car jumps. this happens under light throtle and it happens alot. it could be a problem with the pcm or ecu or the transmission itself. i have never had a car that has done this. when you spend 25k on a car you would expect quality but not with the 6.*ak.Mazda Mazda6 2003 problem was reported in ANNANDALE, VA. Vehicle was purchased on Mar 15, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO.

Mazda Mazda6 2003 Service Brakes, Hydraulic Foundation Components Disc Rotor

Mazda Mazda6 2003 Service Brakes, Hydraulic Foundation Components Disc Rotor Review #10059986

MAZDA MAZDA6 2003 car safety problem was reported on Feb 28, 2004.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:ROTOR . brake rotors on the 2003 mazda 6 seem to be prone to early warping. i had a set machined, then replaced 3 months later and now warped again after only two months.*ak.Mileage was 18000 miles. Vehicle Identification Number (VIN):1YVHP80C435. Mazda Mazda6 2003 problem was reported in SCHWENKSVILLE, PA. Vehicle was purchased on Jan 23, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. DEALER'S NAME: NORTH PENN IMPORTS .

Mazda Mazda6 2003 Vehicle Speed Control

Mazda Mazda6 2003 Vehicle Speed Control Review #10060223

MAZDA MAZDA6 2003 car safety problem was reported on Oct 01, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with VEHICLE SPEED CONTROL . i purchased my 2003 mazda 6s in october 2003. since i have owned the car i gets poor gas mileage on it (about 16-18 miles per gallon). i do plenty of city driving but i still feel that this is not adequate. even when i drive on the highway the gas mileage averages poorly. there is also a smell coming from the exhaust when vehicle is in motion. the vehicle also rev's up higher before switching from lower gears to higher gears. i do not 'jack rabbit' start or stop the vehicle. there is also alot of brake dust on the rims of the front wheels. acceleration is very poor. there is also a jerk when the vehicle switches from first gear to second. don't get me wrong i love the way the vehicle looks, which is the main reason why i bought the vehicle, but the overall quality has turned out to be much poorer than i had expected.*ak.0 person(s) were injured. 0 person(s) died.Mileage was 300 miles. Vehicle Identification Number (VIN):1YVFP80CX35. Mazda Mazda6 2003 problem was reported in ELKHART, IN. Vehicle was purchased on Oct 01, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. DEALER'S NAME: BASNEY MAZDA . DEALER'S TELEPHONE NUMBER: 5742728504 . DEALER'S CITY: SOUTH BEND . DEALER'S STATE CODE: IN.

Mazda Mazda6 2003 Fuel System, Gasoline

Mazda Mazda6 2003 Fuel System, Gasoline Review #10060223

MAZDA MAZDA6 2003 car safety problem was reported on Oct 01, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with FUEL SYSTEM, GASOLINE . i purchased my 2003 mazda 6s in october 2003. since i have owned the car i gets poor gas mileage on it (about 16-18 miles per gallon). i do plenty of city driving but i still feel that this is not adequate. even when i drive on the highway the gas mileage averages poorly. there is also a smell coming from the exhaust when vehicle is in motion. the vehicle also rev's up higher before switching from lower gears to higher gears. i do not 'jack rabbit' start or stop the vehicle. there is also alot of brake dust on the rims of the front wheels. acceleration is very poor. there is also a jerk when the vehicle switches from first gear to second. don't get me wrong i love the way the vehicle looks, which is the main reason why i bought the vehicle, but the overall quality has turned out to be much poorer than i had expected.*ak.0 person(s) were injured. 0 person(s) died.Mileage was 300 miles. Vehicle Identification Number (VIN):1YVFP80CX35. Mazda Mazda6 2003 problem was reported in ELKHART, IN. Vehicle was purchased on Oct 01, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. DEALER'S NAME: BASNEY MAZDA . DEALER'S TELEPHONE NUMBER: 5742728504 . DEALER'S CITY: SOUTH BEND . DEALER'S STATE CODE: IN.

Mazda Mazda6 2003 Engine And Engine Cooling Exhaust System

Mazda Mazda6 2003 Engine And Engine Cooling Exhaust System Review #10060223

MAZDA MAZDA6 2003 car safety problem was reported on Oct 01, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING:EXHAUST SYSTEM . i purchased my 2003 mazda 6s in october 2003. since i have owned the car i gets poor gas mileage on it (about 16-18 miles per gallon). i do plenty of city driving but i still feel that this is not adequate. even when i drive on the highway the gas mileage averages poorly. there is also a smell coming from the exhaust when vehicle is in motion. the vehicle also rev's up higher before switching from lower gears to higher gears. i do not 'jack rabbit' start or stop the vehicle. there is also alot of brake dust on the rims of the front wheels. acceleration is very poor. there is also a jerk when the vehicle switches from first gear to second. don't get me wrong i love the way the vehicle looks, which is the main reason why i bought the vehicle, but the overall quality has turned out to be much poorer than i had expected.*ak.0 person(s) were injured. 0 person(s) died.Mileage was 300 miles. Vehicle Identification Number (VIN):1YVFP80CX35. Mazda Mazda6 2003 problem was reported in ELKHART, IN. Vehicle was purchased on Oct 01, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. DEALER'S NAME: BASNEY MAZDA . DEALER'S TELEPHONE NUMBER: 5742728504 . DEALER'S CITY: SOUTH BEND . DEALER'S STATE CODE: IN.

Mazda Mazda6 2003 Service Brakes, Hydraulic Foundation Components Hoses, Lines/piping, And Fittings

Mazda Mazda6 2003 Service Brakes, Hydraulic Foundation Components Hoses, Lines/piping, And Fittings Review #10061678

MAZDA MAZDA6 2003 car safety problem was reported on Mar 06, 2004.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS . when coming to a stop brakes failed. consumer pulled the vehicle to the side of the road and used the emergency brake to stop the vehicle. consumer took vehicle to dealer, and dealer determined that brake line leaked. *ak.0 person(s) were injured. Mileage was 4100 miles. Mazda Mazda6 2003 problem was reported in ALABASTER, AL. Original Owner. Vehicle was purchased on Jan 15, 2004. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Mazda Mazda6 2003 TRANSMISSION TYPE: MAN .

Mazda Mazda6 2003 Engine And Engine Cooling Exhaust System Emission Control Catalytic Convertor

Mazda Mazda6 2003 Engine And Engine Cooling Exhaust System Emission Control Catalytic Convertor Review #10061812

MAZDA MAZDA6 2003 car safety problem was reported on Mar 10, 2004.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR . my car has been giving off a rotten egg odo for 8 months now since i have purchased ths vehicle. everyone who rides in my car including myself get physically sick due to the smell.*ak.Vehicle Identification Number (VIN):1YVFP80D635. Mazda Mazda6 2003 problem was reported in NORWOOD, PA. Vehicle was purchased on July 25, 2003. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. DEALER'S NAME: PACIFICO MAZDA .

Mazda Mazda6 2003 Air Bags

Mazda Mazda6 2003 Air Bags Review #10064892

MAZDA MAZDA6 2003 car safety problem was reported on Mar 17, 2004.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with AIR BAGS . while driving 55 mph the vehicle was involved in a side impact collision with an semi- tractor trailer. as a result the vehicle flipped twice landing in a ditch. none of the airbags deployed. no injuries reported. please provide any additional information. *nm.Vehicle was involved in a crash. Mileage was 16000 miles. Vehicle Identification Number (VIN):1YVHP80D435. Mazda Mazda6 2003 problem was reported in ATLANTA, GA. Accident was reported to Police. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 55 mph.

Mazda Mazda6 2003 Power Train Manual Transmission

Mazda Mazda6 2003 Power Train Manual Transmission Review #10063930

MAZDA MAZDA6 2003 car safety problem was reported on Oct 15, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:MANUAL TRANSMISSION . 2003 mazda6(s) manual transmission developed shudder when letting out the clutch in 1'rst gear. seems to occur when the drive train has warmed up. took it to the dealer who attributed it to the traction control being on. when i turned the tc off the problem was the same. i will take it back again and request the dealership ride with me to experience the problem. the problem did not develop until 13k miles (500 miles ago). *ak.Mileage was 13000 miles. Vehicle Identification Number (VIN):1YVFP80D335. Mazda Mazda6 2003 problem was reported in CARY, IL. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: MAN . VEHICLE SPEED: 2 mph. DEALER'S NAME: LIBERTYVILLE JEEP, MAZDA ETC . DEALER'S CITY: LIBERTYVILLE . DEALER'S STATE CODE: IL. DEALER'S ZIPCODE: 60048 .

Mazda Mazda6 2003 Engine And Engine Cooling Engine

Mazda Mazda6 2003 Engine And Engine Cooling Engine Review #10065637

MAZDA MAZDA6 2003 car safety problem was reported on Apr 02, 2004.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING:ENGINE . i drive a 2003 mazda 6s, which i purchased from bigger's mazda in elgin, il. this vehicle was purchased new from them. my area of concern involves the check engine light on my vehicle, and the performance of the vehicle when this light is on. on april 2, 2004 my check engine light appeared for the third time. when i operate my vehicle with the light on it performs erratically and unusual. the last time the light came on, i was pulling out into traffic, and my vehicle bogged down. in turn, the driver behind almost rear-ended me. while driving my vehicle yesterday, i went to pass a car on the expressway, and again my car bogged down. every time that i take my car to the dealer, i provide them with the same complaint. i have paperwork to show that i have taken it in three times. after a recent visit to my dealer, they stated, "we have no fix for the check engine light. the light will always come back on. if you are lucky, our mazda engineers will have a remedy by august 2004 (today is 4/6/04). the check engine light is caused by a misfire in the fourth cylinder". what an awful response from the dealer. i am concerned about the safety of my car. i am also concerned about the other drivers around my car. after three visits to my dealer, i feel lost and helpless. please advise. *la.Mileage was 5807 miles. Vehicle Identification Number (VIN):1YVFP80D135. Mazda Mazda6 2003 problem was reported in SOUTH ELGIN, IL. Vehicle was purchased on June 05, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 15 mph. DEALER'S NAME: BIGGER'S MAZDA . DEALER'S TELEPHONE NUMBER: 847-628-6000 . DEALER'S CITY: ELGIN . DEALER'S STATE CODE: IL. DEALER'S ZIPCODE: 60120 .

Mazda Mazda6 2003 Visibility Defroster/defogger System Windshield Controls/wiring

Mazda Mazda6 2003 Visibility Defroster/defogger System Windshield Controls/wiring Review #10065985

MAZDA MAZDA6 2003 car safety problem was reported on Jan 01, 2004.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with VISIBILITY:DEFROSTER/DEFOGGER SYSTEM:WINDSHIELD:CONTROLS/WIRING . cannot turn off heat to windshield nor upper vents. excessive heat to face causes drowsiness and it is difficult to remain alert while feet are still cold. a continuing problem reported to two mazada dealers who were not helpful.*ak.0 person(s) were injured. 0 person(s) died.Mileage was 100 miles. Vehicle Identification Number (VIN):1YVFP80C035. Mazda Mazda6 2003 problem was reported in LITTLE ROCK, AR. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 0 mph. DEALER'S NAME: CRAIN MAZDA . DEALER'S TELEPHONE NUMBER: 501-217-9500 . DEALER'S CITY: LITTLE ROCK . DEALER'S STATE CODE: AR. DEALER'S ZIPCODE: 72211 .

Mazda Mazda6 2003 Suspension Front

Mazda Mazda6 2003 Suspension Front Review #10066341

MAZDA MAZDA6 2003 car safety problem was reported on Mar 09, 2004.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with SUSPENSION:FRONT . i have been in the dealership for the same symptom being a squealing low pitch to a hum when i turn left into any parking spot. my brakes and rotors have been replaced along with a caliper spring. they keep on saying that they have fixed the problem each time and it comes back. i have been in four times for this. also i have had an ecu computer replaced due to a check engine light appearing. lastly, my glove box has been replaced because it was installed with the light on permanently. this problem still exists because the dash board is not perfectly flush with the edge of the glove box, therefore the light continues to stay on and i can see it when i drive at night. *ak.Mileage was 8000 miles. Vehicle Identification Number (VIN):1YVFP80CX35. Mazda Mazda6 2003 problem was reported in AUSTIN, TX. Vehicle was purchased on Sept 09, 2003. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: MAN . DEALER'S NAME: ROGER BEASLEY . DEALER'S TELEPHONE NUMBER: 5124067500 . DEALER'S CITY: AUSTIN . DEALER'S STATE CODE: TX. DEALER'S ZIPCODE: 78757 .

Mazda Mazda6 2003 Power Train Automatic Transmission

Mazda Mazda6 2003 Power Train Automatic Transmission Review #10067622

MAZDA MAZDA6 2003 car safety problem was reported on May 17, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . i bought my car march 6, 2003. in may of 2003 it started making a howling noise when turning left at low speeds or into a parking space. i have brought it in 4 times and they cannot find the noise. for the last 2 months my transmission has been hesitating at around 25-35 mph. it is like it doesn't know what gear to shift into and when it does it makes a loud clunking noise and my car jerks forward. i have had it in twice for that and they cannot find the source of that either. *ak.0 person(s) were injured. 0 person(s) died.Mileage was 7000 miles. Mazda Mazda6 2003 problem was reported in ANDOVER, MN. Vehicle was purchased on Mar 14, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 25 mph. DEALER'S NAME: WHITE BEAR CHEVROLET/MAZDA . DEALER'S CITY: WHITE BEAR LAKE . DEALER'S STATE CODE: MN.

Mazda Mazda6 2003 Visibility Power Window Devices And Controls

Mazda Mazda6 2003 Visibility Power Window Devices And Controls Review #10069302

MAZDA MAZDA6 2003 car safety problem was reported on Aug 15, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with VISIBILITY:POWER WINDOW DEVICES AND CONTROLS . power windows only worked intermittently. dealer in salem, va could not reproduce problem. dealer in dale city repaired. check engine light came on during acceleration. dealer diagnosed and determined light was associated with power windows. one week later, light came on again. dealer rotated a fuel injected, took the car for two days and deteremined that the problem was fixed. two months later, the light came on again. dealer replaced pcm. two weeks later, light is on again..Mileage was 1170 miles. Vehicle Identification Number (VIN):!YVFP8OD335. Mazda Mazda6 2003 problem was reported in WOODBRIDGE, VA. Vehicle was not using Cruise Control. Mazda Mazda6 2003 TRANSMISSION TYPE: MAN .

Mazda Mazda6 2003 Engine And Engine Cooling

Mazda Mazda6 2003 Engine And Engine Cooling Review #10069302

MAZDA MAZDA6 2003 car safety problem was reported on Aug 15, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING . power windows only worked intermittently. dealer in salem, va could not reproduce problem. dealer in dale city repaired. check engine light came on during acceleration. dealer diagnosed and determined light was associated with power windows. one week later, light came on again. dealer rotated a fuel injected, took the car for two days and deteremined that the problem was fixed. two months later, the light came on again. dealer replaced pcm. two weeks later, light is on again..Mileage was 1170 miles. Vehicle Identification Number (VIN):!YVFP8OD335. Mazda Mazda6 2003 problem was reported in WOODBRIDGE, VA. Vehicle was not using Cruise Control. Mazda Mazda6 2003 TRANSMISSION TYPE: MAN .

Mazda Mazda6 2003 Equipment Electrical

Mazda Mazda6 2003 Equipment Electrical Review #10069832

MAZDA MAZDA6 2003 car safety problem was reported on Jan 15, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with EQUIPMENT:ELECTRICAL . the check engine light has been on in my car since the first week i bought the car. i have taken it to the dealer service department, and they tell me that the key entry system is the problem. after the fourth time hearing this, i decided to write someone and let it be known. i use my car as an office for my job, and it's very important that me and my family feel safe in the car. please tell me what i have to do get this fixed. i can't keep taking days off work to go back to the repair shop. the dealership is malloy mazda in woodbridge,va..Mileage was 1000 miles. Vehicle Identification Number (VIN):1YVFP80C835. Mazda Mazda6 2003 problem was reported in DALE CITY, VA. Vehicle was not using Cruise Control. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO.

Mazda Mazda6 2003 Engine And Engine Cooling Exhaust System

Mazda Mazda6 2003 Engine And Engine Cooling Exhaust System Review #10069843

MAZDA MAZDA6 2003 car safety problem was reported on July 15, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING:EXHAUST SYSTEM . on july 4th weekend it started making a clicking noise when you drive it 65mph. the dealership decided it was a defective catalytic conveter. i had to drive it 3 weeks making this noise.then the check engine light came on.then i got a recall for the brake system. now it's aug. 8 i am still in a rental car. all i want is for the dealership to take back the car, cancel the loan & go our seperate ways..Mileage was 0 miles. Vehicle Identification Number (VIN):1YVFP80C435. Mazda Mazda6 2003 problem was reported in AUSTIN, TX. Vehicle was not using Cruise Control. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO.

Mazda Mazda6 2003 Service Brakes, Hydraulic

Mazda Mazda6 2003 Service Brakes, Hydraulic Review #10069843

MAZDA MAZDA6 2003 car safety problem was reported on July 15, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES, HYDRAULIC . on july 4th weekend it started making a clicking noise when you drive it 65mph. the dealership decided it was a defective catalytic conveter. i had to drive it 3 weeks making this noise.then the check engine light came on.then i got a recall for the brake system. now it's aug. 8 i am still in a rental car. all i want is for the dealership to take back the car, cancel the loan & go our seperate ways..Mileage was 0 miles. Vehicle Identification Number (VIN):1YVFP80C435. Mazda Mazda6 2003 problem was reported in AUSTIN, TX. Vehicle was not using Cruise Control. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO.

Mazda Mazda6 2003 Equipment Electrical

Mazda Mazda6 2003 Equipment Electrical Review #10071087

MAZDA MAZDA6 2003 car safety problem was reported on Oct 15, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with EQUIPMENT:ELECTRICAL . i purchased a 2003 mazda six on 6-28-03. 2 months later the engine and other dash lights appear and car shuts off. i pick up the car 6 days later only to return it a week later when the engine light comes on again. a week later i pick it up on friday at 11:00 a.m. and by 7:00 p.m. all dash lights come on, transmission slipping, speed odometer erratic, and loss of power. it has been in the shop for 12 more days and they can not tell me anything. my piece of crap has been in the shop for 26 days, they have damaged numerous things(spoiler has crack, paint nicks on hood and doors)all i want is my money back and i walk away!.Mileage was 500 miles. Vehicle Identification Number (VIN):1YVFP80D735. Mazda Mazda6 2003 problem was reported in MURFREESBORO, TN. Vehicle was not using Cruise Control. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO.

Mazda Mazda6 2003 Power Train

Mazda Mazda6 2003 Power Train Review #10071087

MAZDA MAZDA6 2003 car safety problem was reported on Oct 15, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN . i purchased a 2003 mazda six on 6-28-03. 2 months later the engine and other dash lights appear and car shuts off. i pick up the car 6 days later only to return it a week later when the engine light comes on again. a week later i pick it up on friday at 11:00 a.m. and by 7:00 p.m. all dash lights come on, transmission slipping, speed odometer erratic, and loss of power. it has been in the shop for 12 more days and they can not tell me anything. my piece of crap has been in the shop for 26 days, they have damaged numerous things(spoiler has crack, paint nicks on hood and doors)all i want is my money back and i walk away!.Mileage was 500 miles. Vehicle Identification Number (VIN):1YVFP80D735. Mazda Mazda6 2003 problem was reported in MURFREESBORO, TN. Vehicle was not using Cruise Control. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO.

Mazda Mazda6 2003 Engine And Engine Cooling

Mazda Mazda6 2003 Engine And Engine Cooling Review #10071087

MAZDA MAZDA6 2003 car safety problem was reported on Oct 15, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING . i purchased a 2003 mazda six on 6-28-03. 2 months later the engine and other dash lights appear and car shuts off. i pick up the car 6 days later only to return it a week later when the engine light comes on again. a week later i pick it up on friday at 11:00 a.m. and by 7:00 p.m. all dash lights come on, transmission slipping, speed odometer erratic, and loss of power. it has been in the shop for 12 more days and they can not tell me anything. my piece of crap has been in the shop for 26 days, they have damaged numerous things(spoiler has crack, paint nicks on hood and doors)all i want is my money back and i walk away!.Mileage was 500 miles. Vehicle Identification Number (VIN):1YVFP80D735. Mazda Mazda6 2003 problem was reported in MURFREESBORO, TN. Vehicle was not using Cruise Control. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO.

Mazda Mazda6 2003 Electrical System

Mazda Mazda6 2003 Electrical System Review #10072343

MAZDA MAZDA6 2003 car safety problem was reported on May 06, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ELECTRICAL SYSTEM . i purchased a 2003 mazda6 on 4/18/2003, at of today it has 3,800 miles.after driving about 10 miles i stopped to order food from a drive thru window. i was told that it would be 10 mins for my order to be ready, so i pulled over to a stall and waited for 15 mins, with the car still on(no ac windows down). while placing my order i heard the fan turn on i knew it was on because it was making a very loud noise (not like normal). it stay on while i was parked waiting for my order and on the drive home 10 min. it continued to stay on 90 sec after car was turned off. i went to check on the internet to see if there was a problem with anyone else and from ca to fa and even in can mazda6 owners have had to replace relay control module. i called dealer they said that this was normal, but i could bring it in to check. after car was inspected i was told that the relay control module needed to be replaced. *la.0 person(s) were injured. 0 person(s) died.Mileage was 3890 miles. Vehicle Identification Number (VIN):1YVHP80D735. Mazda Mazda6 2003 problem was reported in KILLEEN, TX. Original Owner. Vehicle was purchased on Apr 18, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2003 Service Brakes, Hydraulic Antilock

Mazda Mazda6 2003 Service Brakes, Hydraulic Antilock Review #10075637

MAZDA MAZDA6 2003 car safety problem was reported on May 27, 2004.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES, HYDRAULIC:ANTILOCK . the computer system failed without warning. as a result the brakes locked, then started smoking. the cause has yet to be determined. please provide additional information. *nm.0 person(s) were injured. 0 person(s) died.Mileage was 10000 miles. Vehicle Identification Number (VIN):PLEASE FILL. Mazda Mazda6 2003 problem was reported in WAIPAHU, HI. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control.

Mazda Mazda6 2003 Engine And Engine Cooling Cooling System Fan

Mazda Mazda6 2003 Engine And Engine Cooling Cooling System Fan Review #10075284

MAZDA MAZDA6 2003 car safety problem was reported on Apr 04, 2004.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN . while waiting in my car at the bank with the air conditioning on i noticed an odd smell and then the temp gauge started rising fast. i pulled to the side immediately and turned my car off and waited 30 minutes. i took my car in the next day and was informed my cooling fan control unit needed replacing, which they did. i had to ask for my invoice which was given to me. it is working fine now, but i find it odd that such a new car could have such a problem..0 person(s) were injured. 0 person(s) died.Mileage was 4449 miles. Vehicle Identification Number (VIN):1YVFP80D035. Mazda Mazda6 2003 problem was reported in BRYAN, TX. Original Owner. Vehicle was purchased on June 03, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Mazda Mazda6 2003 drive type:U. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 0 mph. DEALER'S NAME: GARLYN SHELTON .

Mazda Mazda6 2003 Steering Wheel And Handle Bar

Mazda Mazda6 2003 Steering Wheel And Handle Bar Review #10078673

MAZDA MAZDA6 2003 car safety problem was reported on Jan 08, 2004.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with STEERING:WHEEL AND HANDLE BAR . steering wheel defective. *ak.0 person(s) were injured. 0 person(s) died.Mileage was 5000 miles. Vehicle Identification Number (VIN):1YVFP80C835. Mazda Mazda6 2003 problem was reported in GREENACRES, FL. Original Owner. Vehicle was purchased on Oct 18, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. DEALER'S NAME: PALM BEACH MAZDA . DEALER'S CITY: WEST PALM BEACH . DEALER'S STATE CODE: FL.

Mazda Mazda6 2003 Power Train Manual Transmission

Mazda Mazda6 2003 Power Train Manual Transmission Review #10080394

MAZDA MAZDA6 2003 car safety problem was reported on May 17, 2004.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:MANUAL TRANSMISSION . in early june my mazda 6 mtx began to experience a problem with the transmission. whenever i would accelerate the rpms would increase by 1k then decrease by about the same amount before the transmission would catch and the power would be distributed to the wheels. now a little over a month later my clutch is almost completely worn out. i'm taking my car in to get this checked out, but the car shouldn't be experiencing any problems with the clutch/transmission when it's still under 26,000 miles. the car is not in stop-and-go traffic nor is it under any heavy load. *nm.0 person(s) were injured. 0 person(s) died.Mileage was 24000 miles. Mazda Mazda6 2003 problem was reported in PEACHTREE CITY, GA. Original Owner. Vehicle was purchased on Jan 11, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: MAN . DEALER'S NAME: HENNESSY MAZDA . DEALER'S CITY: MORROW . DEALER'S STATE CODE: GA. DEALER'S ZIPCODE: 30260 .

Mazda Mazda6 2003 Service Brakes, Hydraulic Foundation Components Disc Rotor

Mazda Mazda6 2003 Service Brakes, Hydraulic Foundation Components Disc Rotor Review #10080476

MAZDA MAZDA6 2003 car safety problem was reported on June 24, 2004.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:ROTOR . it was at 7,000 miles on vehicle, that i experienced the brakes acting like they were out of round. it was at 11,000 miles that i had the brakes checked out. i was told that all 4 disk brake rotors needed to be resurfaced. dealership said it was because i had taken my car to a car wash and that all 4 rotors had warped. *jb.Mileage was 7000 miles. Vehicle Identification Number (VIN):1YVFP80CX35. Mazda Mazda6 2003 problem was reported in CASTLE HAYNE, NC. Original Owner. Vehicle was purchased on Nov 12, 2003. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. DEALER'S NAME: STEVENSON MAZDA . DEALER'S TELEPHONE NUMBER: 9103501650 . DEALER'S CITY: WILMINGTON . DEALER'S STATE CODE: NC. DEALER'S ZIPCODE: 28405 .

Mazda Mazda6 2003 Service Brakes, Hydraulic Foundation Components Disc Rotor Review #10083206

MAZDA MAZDA6 2003 car safety problem was reported on July 10, 2004.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:ROTOR . consumer complained that front brake rotors wore out excessively within 8,000 miles. vehicle was taken to the dealer, who turned both front rotors. *ak.Mileage was 8000 miles. Vehicle Identification Number (VIN):1YVFP80D635. Mazda Mazda6 2003 problem was reported in SHERMAN OAKS, CA. Original Owner. Vehicle was purchased on Sept 16, 2003. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Mazda Mazda6 2003 drive type:FWD. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO.

Mazda Mazda6 2003 Power Train Manual Transmission

Mazda Mazda6 2003 Power Train Manual Transmission Review #10086418

MAZDA MAZDA6 2003 car safety problem was reported on Aug 03, 2004.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:MANUAL TRANSMISSION . i have a mazda 6i.at 8500 miles after having my car i had the clutch go out. when i took it to the dealer i was severly stereotyped as a street racer which i am in no way , if that were the case i would have bought the 6s . they wanted to charge me $800 to fix the problem , which i immediately disputed and was treated as a child.eventually they fixed it and i quote "not under warranty but fixed out of kindness" and that was the end of that. now at 13000 miles my manual transmission would not shift into 1st or 2nd gear i took it in and the first response i got from the service clerk was " whats wrong with the car?" and that if they find i caused the problem it would be estimated $1000 to fix it if it wasn't covered by the warranty. i feel that because my age i am discriminated against even though i purchased the car myself in my name at 18. i am currently waiting for a response from the dealer as to what is going to happen with the transmission replacement.*ak.0 person(s) were injured. 0 person(s) died.Mileage was 8000 miles. Mazda Mazda6 2003 problem was reported in PATTERSON, CA. Original Owner. Vehicle was purchased on Jan 14, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: MAN . DEALER'S NAME: MODESTO MAZDA . DEALER'S TELEPHONE NUMBER: 2095575588 . DEALER'S CITY: MODESTO . DEALER'S STATE CODE: CA. DEALER'S ZIPCODE: 95350 .

Mazda Mazda6 2003 Power Train Clutch Assembly

Mazda Mazda6 2003 Power Train Clutch Assembly Review #10086418

MAZDA MAZDA6 2003 car safety problem was reported on Aug 03, 2004.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:CLUTCH ASSEMBLY . i have a mazda 6i.at 8500 miles after having my car i had the clutch go out. when i took it to the dealer i was severly stereotyped as a street racer which i am in no way , if that were the case i would have bought the 6s . they wanted to charge me $800 to fix the problem , which i immediately disputed and was treated as a child.eventually they fixed it and i quote "not under warranty but fixed out of kindness" and that was the end of that. now at 13000 miles my manual transmission would not shift into 1st or 2nd gear i took it in and the first response i got from the service clerk was " whats wrong with the car?" and that if they find i caused the problem it would be estimated $1000 to fix it if it wasn't covered by the warranty. i feel that because my age i am discriminated against even though i purchased the car myself in my name at 18. i am currently waiting for a response from the dealer as to what is going to happen with the transmission replacement.*ak.0 person(s) were injured. 0 person(s) died.Mileage was 8000 miles. Mazda Mazda6 2003 problem was reported in PATTERSON, CA. Original Owner. Vehicle was purchased on Jan 14, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: MAN . DEALER'S NAME: MODESTO MAZDA . DEALER'S TELEPHONE NUMBER: 2095575588 . DEALER'S CITY: MODESTO . DEALER'S STATE CODE: CA. DEALER'S ZIPCODE: 95350 .

Mazda Mazda6 2003 Power Train Automatic Transmission

Mazda Mazda6 2003 Power Train Automatic Transmission Review #10091979

MAZDA MAZDA6 2003 car safety problem was reported on May 20, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . while driving at any speed consumer heard a loud knocking noise coming from the rear. consumer was able to maintain control of the vehicle, and drove it to dealer for inspection. however, mechanic could not duplicate the problem. *ak.0 person(s) were injured. 0 person(s) died.Mazda Mazda6 2003 problem was reported in SEABROOK, NH. Original Owner. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO.

Mazda Mazda6 2003 Steering Hydraulic Power Assist System

Mazda Mazda6 2003 Steering Hydraulic Power Assist System Review #10091982

MAZDA MAZDA6 2003 car safety problem was reported on Aug 13, 2004.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with STEERING:HYDRAULIC POWER ASSIST SYSTEM . while driving 60 mph, the vehicle swerved to the left. the consumer was not able to maintain control of the vehicle and crashed into an embankment. the vehicle was towed to the dealer for inspection, the and mechanic determined that rain caused the vehicle to swerve. *ak *jb.Vehicle was involved in a crash. 0 person(s) were injured. 0 person(s) died.Mileage was 12072 miles. Vehicle Identification Number (VIN):1YVFP80C135. Mazda Mazda6 2003 problem was reported in SEABROOK, NH. Accident was reported to Police. Original Owner. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 60 mph. DEALER'S NAME: IRA MAZDA . DEALER'S CITY: DANVERS . DEALER'S STATE CODE: MA. DEALER'S ZIPCODE: 01923 .

Mazda Mazda6 2003 Service Brakes, Hydraulic Foundation Components Master Cylinder

Mazda Mazda6 2003 Service Brakes, Hydraulic Foundation Components Master Cylinder Review #10091938

MAZDA MAZDA6 2003 car safety problem was reported on Sept 01, 2004.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER . the clutch has begun to fail. the dealer indicated that it would be five months before one became available. *nm the clutch, starter, cd changer, and panel cover were defective. there was rust on the door sashes. there was a smell from the exhaust that entered the vehicle, there were vibrations and rattles in the door, which had been adjusted. there were problems with the master cylinder and the leaking fuel sender unit in the gas tank. the starter would grind and the clutch shuddered. *sc *jb.Vehicle Identification Number (VIN):1YVHP80D835. Mazda Mazda6 2003 problem was reported in BLOOMINGTON, IL. Original Owner. Vehicle was purchased on Mar 11, 2003. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: MAN . DEALER'S NAME: SAN LENAN MAZDA . DEALER'S CITY: BLOOMINGTON . DEALER'S STATE CODE: IL. DEALER'S ZIPCODE: 61704 .

Mazda Mazda6 2003 Engine And Engine Cooling Exhaust System

Mazda Mazda6 2003 Engine And Engine Cooling Exhaust System Review #10091938

MAZDA MAZDA6 2003 car safety problem was reported on Sept 01, 2004.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING:EXHAUST SYSTEM . the clutch has begun to fail. the dealer indicated that it would be five months before one became available. *nm the clutch, starter, cd changer, and panel cover were defective. there was rust on the door sashes. there was a smell from the exhaust that entered the vehicle, there were vibrations and rattles in the door, which had been adjusted. there were problems with the master cylinder and the leaking fuel sender unit in the gas tank. the starter would grind and the clutch shuddered. *sc *jb.Vehicle Identification Number (VIN):1YVHP80D835. Mazda Mazda6 2003 problem was reported in BLOOMINGTON, IL. Original Owner. Vehicle was purchased on Mar 11, 2003. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: MAN . DEALER'S NAME: SAN LENAN MAZDA . DEALER'S CITY: BLOOMINGTON . DEALER'S STATE CODE: IL. DEALER'S ZIPCODE: 61704 .

Mazda Mazda6 2003 Electrical System

Mazda Mazda6 2003 Electrical System Review #10091938

MAZDA MAZDA6 2003 car safety problem was reported on Sept 01, 2004.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ELECTRICAL SYSTEM . the clutch has begun to fail. the dealer indicated that it would be five months before one became available. *nm the clutch, starter, cd changer, and panel cover were defective. there was rust on the door sashes. there was a smell from the exhaust that entered the vehicle, there were vibrations and rattles in the door, which had been adjusted. there were problems with the master cylinder and the leaking fuel sender unit in the gas tank. the starter would grind and the clutch shuddered. *sc *jb.Vehicle Identification Number (VIN):1YVHP80D835. Mazda Mazda6 2003 problem was reported in BLOOMINGTON, IL. Original Owner. Vehicle was purchased on Mar 11, 2003. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: MAN . DEALER'S NAME: SAN LENAN MAZDA . DEALER'S CITY: BLOOMINGTON . DEALER'S STATE CODE: IL. DEALER'S ZIPCODE: 61704 .

Mazda Mazda6 2003 Power Train Clutch Assembly

Mazda Mazda6 2003 Power Train Clutch Assembly Review #10091938

MAZDA MAZDA6 2003 car safety problem was reported on Sept 01, 2004.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:CLUTCH ASSEMBLY . the clutch has begun to fail. the dealer indicated that it would be five months before one became available. *nm the clutch, starter, cd changer, and panel cover were defective. there was rust on the door sashes. there was a smell from the exhaust that entered the vehicle, there were vibrations and rattles in the door, which had been adjusted. there were problems with the master cylinder and the leaking fuel sender unit in the gas tank. the starter would grind and the clutch shuddered. *sc *jb.Vehicle Identification Number (VIN):1YVHP80D835. Mazda Mazda6 2003 problem was reported in BLOOMINGTON, IL. Original Owner. Vehicle was purchased on Mar 11, 2003. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: MAN . DEALER'S NAME: SAN LENAN MAZDA . DEALER'S CITY: BLOOMINGTON . DEALER'S STATE CODE: IL. DEALER'S ZIPCODE: 61704 .

Mazda Mazda6 2003 Fuel System, Gasoline Storage Tank Assembly

Mazda Mazda6 2003 Fuel System, Gasoline Storage Tank Assembly Review #10091938

MAZDA MAZDA6 2003 car safety problem was reported on Sept 01, 2004.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY . the clutch has begun to fail. the dealer indicated that it would be five months before one became available. *nm the clutch, starter, cd changer, and panel cover were defective. there was rust on the door sashes. there was a smell from the exhaust that entered the vehicle, there were vibrations and rattles in the door, which had been adjusted. there were problems with the master cylinder and the leaking fuel sender unit in the gas tank. the starter would grind and the clutch shuddered. *sc *jb.Vehicle Identification Number (VIN):1YVHP80D835. Mazda Mazda6 2003 problem was reported in BLOOMINGTON, IL. Original Owner. Vehicle was purchased on Mar 11, 2003. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: MAN . DEALER'S NAME: SAN LENAN MAZDA . DEALER'S CITY: BLOOMINGTON . DEALER'S STATE CODE: IL. DEALER'S ZIPCODE: 61704 .

Mazda Mazda6 2003 Structure

Mazda Mazda6 2003 Structure Review #10091938

MAZDA MAZDA6 2003 car safety problem was reported on Sept 01, 2004.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with STRUCTURE . the clutch has begun to fail. the dealer indicated that it would be five months before one became available. *nm the clutch, starter, cd changer, and panel cover were defective. there was rust on the door sashes. there was a smell from the exhaust that entered the vehicle, there were vibrations and rattles in the door, which had been adjusted. there were problems with the master cylinder and the leaking fuel sender unit in the gas tank. the starter would grind and the clutch shuddered. *sc *jb.Vehicle Identification Number (VIN):1YVHP80D835. Mazda Mazda6 2003 problem was reported in BLOOMINGTON, IL. Original Owner. Vehicle was purchased on Mar 11, 2003. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: MAN . DEALER'S NAME: SAN LENAN MAZDA . DEALER'S CITY: BLOOMINGTON . DEALER'S STATE CODE: IL. DEALER'S ZIPCODE: 61704 .

Mazda Mazda6 2003 Power Train Clutch Assembly Pedal/linkage

Mazda Mazda6 2003 Power Train Clutch Assembly Pedal/linkage Review #10096451

MAZDA MAZDA6 2003 car safety problem was reported on Oct 18, 2004.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:CLUTCH ASSEMBLY:PEDAL/LINKAGE . the clutch on a standard tramission has gone out and stated to be abused. the clutch has not been abused the car is 15 months old and has 14000 miles on it. *ak.0 person(s) were injured. 0 person(s) died.Mileage was 14500 miles. Vehicle Identification Number (VIN):1YVFP80D035. Mazda Mazda6 2003 problem was reported in HOUMA, LA. Original Owner. Vehicle was purchased on May 20, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: MAN . VEHICLE SPEED: 0 mph. DEALER'S NAME: DICK BARKER MAZDA . DEALER'S TELEPHONE NUMBER: 985-876-5333 . DEALER'S CITY: HOUMA . DEALER'S STATE CODE: LA. DEALER'S ZIPCODE: 70360 .

Mazda Mazda6 2003 Vehicle Speed Control

Mazda Mazda6 2003 Vehicle Speed Control Review #10099840

MAZDA MAZDA6 2003 car safety problem was reported on Nov 09, 2004.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with VEHICLE SPEED CONTROL . while driving 40 mph vehicle intermittently accelerated at higher speed. cruise control would not be engaged during this issue. vehicle was taken to the dealer on several occasions, and they were unable to duplicate the problem.*ak the vehicle was taken to the dealer and was told that the vehcile was in good condtion and that nothing was wrong. the vehicle would also hesitate at various speeds and made a clunking noise. the vehicle revved high while at a complete stop. the check enigine light illuminated intermittently. each time the dealer turn the engine light out it would come back on. *nm.0 person(s) were injured. 0 person(s) died.Mileage was 16000 miles. Vehicle Identification Number (VIN):1YVFP80C935. Mazda Mazda6 2003 problem was reported in MASTIC BEACH, NY. Original Owner. Vehicle was purchased on July 28, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 49 mph.

Mazda Mazda6 2003 Engine And Engine Cooling Engine

Mazda Mazda6 2003 Engine And Engine Cooling Engine Review #10099840

MAZDA MAZDA6 2003 car safety problem was reported on Nov 09, 2004.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING:ENGINE . while driving 40 mph vehicle intermittently accelerated at higher speed. cruise control would not be engaged during this issue. vehicle was taken to the dealer on several occasions, and they were unable to duplicate the problem.*ak the vehicle was taken to the dealer and was told that the vehcile was in good condtion and that nothing was wrong. the vehicle would also hesitate at various speeds and made a clunking noise. the vehicle revved high while at a complete stop. the check enigine light illuminated intermittently. each time the dealer turn the engine light out it would come back on. *nm.0 person(s) were injured. 0 person(s) died.Mileage was 16000 miles. Vehicle Identification Number (VIN):1YVFP80C935. Mazda Mazda6 2003 problem was reported in MASTIC BEACH, NY. Original Owner. Vehicle was purchased on July 28, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 49 mph.

Mazda Mazda6 2003 Power Train Automatic Transmission

Mazda Mazda6 2003 Power Train Automatic Transmission Review #10100240

MAZDA MAZDA6 2003 car safety problem was reported on Apr 21, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . 2003 mazda 6 check engine light at 1 week, transmissions slipping & slamming into gear through 1 1/2 years of ownership, at 35,000 engine went was replaced, replacement had 300 miles on it when it died on the southern end of nj turnpike towed to de dealer, still has transmission problems, back in shop now for engine problems only 3000 on replacement engine, into dealer numerous times for water leaks that have cause mold & rust inside the car on seatbelts & causing me a great deal of illness - still not repaired going through lemon law since nov 2003. *ak.0 person(s) were injured. 0 person(s) died.Mileage was 750 miles. Vehicle Identification Number (VIN):1YVFP80D035. Mazda Mazda6 2003 problem was reported in WARREN, NJ. Original Owner. Vehicle was purchased on Apr 07, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 25 mph. DEALER'S NAME: CHRYSTAL AUTO MALL . DEALER'S TELEPHONE NUMBER: 732-968-1000 . DEALER'S CITY: GREEN BROOK . DEALER'S STATE CODE: NJ.

Mazda Mazda6 2003 Engine And Engine Cooling Exhaust System Manifold/header/muffler/tail Pipe

Mazda Mazda6 2003 Engine And Engine Cooling Exhaust System Manifold/header/muffler/tail Pipe Review #10100240

MAZDA MAZDA6 2003 car safety problem was reported on Apr 21, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE . 2003 mazda 6 check engine light at 1 week, transmissions slipping & slamming into gear through 1 1/2 years of ownership, at 35,000 engine went was replaced, replacement had 300 miles on it when it died on the southern end of nj turnpike towed to de dealer, still has transmission problems, back in shop now for engine problems only 3000 on replacement engine, into dealer numerous times for water leaks that have cause mold & rust inside the car on seatbelts & causing me a great deal of illness - still not repaired going through lemon law since nov 2003. *ak.0 person(s) were injured. 0 person(s) died.Mileage was 750 miles. Vehicle Identification Number (VIN):1YVFP80D035. Mazda Mazda6 2003 problem was reported in WARREN, NJ. Original Owner. Vehicle was purchased on Apr 07, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 25 mph. DEALER'S NAME: CHRYSTAL AUTO MALL . DEALER'S TELEPHONE NUMBER: 732-968-1000 . DEALER'S CITY: GREEN BROOK . DEALER'S STATE CODE: NJ.

Mazda Mazda6 2003 Seat Belts Front Retractor

Mazda Mazda6 2003 Seat Belts Front Retractor Review #10100240

MAZDA MAZDA6 2003 car safety problem was reported on Apr 21, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with SEAT BELTS:FRONT:RETRACTOR . 2003 mazda 6 check engine light at 1 week, transmissions slipping & slamming into gear through 1 1/2 years of ownership, at 35,000 engine went was replaced, replacement had 300 miles on it when it died on the southern end of nj turnpike towed to de dealer, still has transmission problems, back in shop now for engine problems only 3000 on replacement engine, into dealer numerous times for water leaks that have cause mold & rust inside the car on seatbelts & causing me a great deal of illness - still not repaired going through lemon law since nov 2003. *ak.0 person(s) were injured. 0 person(s) died.Mileage was 750 miles. Vehicle Identification Number (VIN):1YVFP80D035. Mazda Mazda6 2003 problem was reported in WARREN, NJ. Original Owner. Vehicle was purchased on Apr 07, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 25 mph. DEALER'S NAME: CHRYSTAL AUTO MALL . DEALER'S TELEPHONE NUMBER: 732-968-1000 . DEALER'S CITY: GREEN BROOK . DEALER'S STATE CODE: NJ.

Mazda Mazda6 2003 Electrical System Wiring Front Underhood

Mazda Mazda6 2003 Electrical System Wiring Front Underhood Review #10102322

MAZDA MAZDA6 2003 car safety problem was reported on Dec 03, 2004.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ELECTRICAL SYSTEM:WIRING:FRONT UNDERHOOD . the car got stuck in a mixture of mud and snow. during the effort to get the car unstuck there was a spark inside of the car on the drivers side. the occupants of the car exited the car and found that there were flames shooting out from underneath the front of the vehicle. they were unable to stop the fire at that point and the car has been burned to nothing. i feel that there needs to be some kind of investigation as to why the car started on fire especially when it was stuck mostly in snow.*ak.Vehicle was on fire. Mileage was 40000 miles. Vehicle Identification Number (VIN):1YVFP80D035. Mazda Mazda6 2003 problem was reported in SCOTTSBLUFF, NE. Accident was reported to Police. Original Owner. Vehicle was purchased on Aug 18, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Mazda Mazda6 2003 drive type:U. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 0 mph. DEALER'S NAME: REGANIS AUTO CENTER . DEALER'S TELEPHONE NUMBER: 308-632-8200 . DEALER'S CITY: SCOTTSBLUFF . DEALER'S STATE CODE: NE. DEALER'S ZIPCODE: 69361 .

Mazda Mazda6 2003 Steering Rack And Pinion

Mazda Mazda6 2003 Steering Rack And Pinion Review #10126849

MAZDA MAZDA6 2003 car safety problem was reported on June 17, 2005.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with STEERING:RACK AND PINION . the transmission in my 2003 mazda 6s has failed on me 2 times in 2 years at the most diffucult times... finals week at college and aslo during a busy time of work. the dealership has ackknowledgewd the problem and reprogrammed the computer system. still the car had problems immidieatley after that visit, the transmission failed. they replaced the transmission with a new one, it too had the same problems... they acknowledged the situation and were unable to diagnose the problem. they told me that my car already had the upgraded computer program that is supposed to fix the erratic shifting. and that i should return if it gets worse. when it did, the technician drove it and now knows what it is doing, but he too said he doesn't know how to fix the problem if no check engine lights are coming on.... thats the other problem. the check engine light don't come on when the car does it, but further more they don't even come on when the transmission fails completely! i am worried that this car has a major problems that will only get worse and adversley affect other components. which it already has... they rack and pinion went out and almost caused me to wreck into a city bus, the subframe was installed too tight and caused the car to squeak and rattle, the brakes have a chatter that has been addressed and have been replaced twice. but most of al all of these things have happened in the first 2 years (20 months.) the original transmission issue was addressed at 12,000 miles and has since by my opinion been the cause of the other related problems. also the car sits an inch and a quarter lower on the passenger front than the driver front. causing the rear to also be uneven..Mileage was 24981 miles. Vehicle Identification Number (VIN):1YVFP80D635. Mazda Mazda6 2003 problem was reported in FRESNO, CA. Original Owner. Vehicle was purchased on Aug 15, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 10 mph. DEALER'S NAME: LITHIA MAZDA . DEALER'S TELEPHONE NUMBER: 559-435-8400 . DEALER'S CITY: FRESNO . DEALER'S STATE CODE: CA. DEALER'S ZIPCODE: 93710 .

Mazda Mazda6 2003 Power Train Automatic Transmission Control Module (tcm, Pcm)

Mazda Mazda6 2003 Power Train Automatic Transmission Control Module (tcm, Pcm) Review #10126849

MAZDA MAZDA6 2003 car safety problem was reported on June 17, 2005.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM, PCM) . the transmission in my 2003 mazda 6s has failed on me 2 times in 2 years at the most diffucult times... finals week at college and aslo during a busy time of work. the dealership has ackknowledgewd the problem and reprogrammed the computer system. still the car had problems immidieatley after that visit, the transmission failed. they replaced the transmission with a new one, it too had the same problems... they acknowledged the situation and were unable to diagnose the problem. they told me that my car already had the upgraded computer program that is supposed to fix the erratic shifting. and that i should return if it gets worse. when it did, the technician drove it and now knows what it is doing, but he too said he doesn't know how to fix the problem if no check engine lights are coming on.... thats the other problem. the check engine light don't come on when the car does it, but further more they don't even come on when the transmission fails completely! i am worried that this car has a major problems that will only get worse and adversley affect other components. which it already has... they rack and pinion went out and almost caused me to wreck into a city bus, the subframe was installed too tight and caused the car to squeak and rattle, the brakes have a chatter that has been addressed and have been replaced twice. but most of al all of these things have happened in the first 2 years (20 months.) the original transmission issue was addressed at 12,000 miles and has since by my opinion been the cause of the other related problems. also the car sits an inch and a quarter lower on the passenger front than the driver front. causing the rear to also be uneven..Mileage was 24981 miles. Vehicle Identification Number (VIN):1YVFP80D635. Mazda Mazda6 2003 problem was reported in FRESNO, CA. Original Owner. Vehicle was purchased on Aug 15, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 10 mph. DEALER'S NAME: LITHIA MAZDA . DEALER'S TELEPHONE NUMBER: 559-435-8400 . DEALER'S CITY: FRESNO . DEALER'S STATE CODE: CA. DEALER'S ZIPCODE: 93710 .

Mazda Mazda6 2003 Power Train Automatic Transmission Review #10126849

MAZDA MAZDA6 2003 car safety problem was reported on June 17, 2005.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . the transmission in my 2003 mazda 6s has failed on me 2 times in 2 years at the most diffucult times... finals week at college and aslo during a busy time of work. the dealership has ackknowledgewd the problem and reprogrammed the computer system. still the car had problems immidieatley after that visit, the transmission failed. they replaced the transmission with a new one, it too had the same problems... they acknowledged the situation and were unable to diagnose the problem. they told me that my car already had the upgraded computer program that is supposed to fix the erratic shifting. and that i should return if it gets worse. when it did, the technician drove it and now knows what it is doing, but he too said he doesn't know how to fix the problem if no check engine lights are coming on.... thats the other problem. the check engine light don't come on when the car does it, but further more they don't even come on when the transmission fails completely! i am worried that this car has a major problems that will only get worse and adversley affect other components. which it already has... they rack and pinion went out and almost caused me to wreck into a city bus, the subframe was installed too tight and caused the car to squeak and rattle, the brakes have a chatter that has been addressed and have been replaced twice. but most of al all of these things have happened in the first 2 years (20 months.) the original transmission issue was addressed at 12,000 miles and has since by my opinion been the cause of the other related problems. also the car sits an inch and a quarter lower on the passenger front than the driver front. causing the rear to also be uneven..Mileage was 24981 miles. Vehicle Identification Number (VIN):1YVFP80D635. Mazda Mazda6 2003 problem was reported in FRESNO, CA. Original Owner. Vehicle was purchased on Aug 15, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 10 mph. DEALER'S NAME: LITHIA MAZDA . DEALER'S TELEPHONE NUMBER: 559-435-8400 . DEALER'S CITY: FRESNO . DEALER'S STATE CODE: CA. DEALER'S ZIPCODE: 93710 .

Mazda Mazda6 2003 Fuel System, Gasoline Delivery Fuel Pump

Mazda Mazda6 2003 Fuel System, Gasoline Delivery Fuel Pump Review #10127275

MAZDA MAZDA6 2003 car safety problem was reported on Dec 22, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP . check engine light came on car was hesitating in middle of highway felt like it wanted to shut off made it home next day car did not start had it towed to the dealer car kept in shop for a month dealer could not figure out the problem said it was a sensor in the engine that was defective got the car back but it since then continued to give me problems brought the car back to original dealer crystal mazda for 3 recalls in july04 and other problems, in april05 check engine light suddenly turns on in the middle of a busy highway car starts to jerk and just died car was towed to the dealer and they called me weeks later to tell me the engine seazed i have had a lemon law case with kimmel and silverman for a year now dealership have been very nasty to me as well as the manufacturer they do not want to fix the vehicle or give me a replacement i also requested a copy of an invoice describing the cause of the engine dying and diagnosis they refuse to do so i have become so ill because of this and have a child to think about i just want a reliable car that me and my daughter will be safe in can you help..Mileage was 10000 miles. Mazda Mazda6 2003 problem was reported in PERTH AMBOY, NJ. Original Owner. Vehicle was purchased on May 07, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Mazda Mazda6 2003 drive type:4WD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 35 mph. DEALER'S NAME: CRYSTAL AUTO MALL . DEALER'S TELEPHONE NUMBER: 732 968 1000 . DEALER'S CITY: GREENBROOK . DEALER'S STATE CODE: NJ.

Mazda Mazda6 2003 Power Train Automatic Transmission Torque Converter

Mazda Mazda6 2003 Power Train Automatic Transmission Torque Converter Review #10127275

MAZDA MAZDA6 2003 car safety problem was reported on Dec 22, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION:TORQUE CONVERTER . check engine light came on car was hesitating in middle of highway felt like it wanted to shut off made it home next day car did not start had it towed to the dealer car kept in shop for a month dealer could not figure out the problem said it was a sensor in the engine that was defective got the car back but it since then continued to give me problems brought the car back to original dealer crystal mazda for 3 recalls in july04 and other problems, in april05 check engine light suddenly turns on in the middle of a busy highway car starts to jerk and just died car was towed to the dealer and they called me weeks later to tell me the engine seazed i have had a lemon law case with kimmel and silverman for a year now dealership have been very nasty to me as well as the manufacturer they do not want to fix the vehicle or give me a replacement i also requested a copy of an invoice describing the cause of the engine dying and diagnosis they refuse to do so i have become so ill because of this and have a child to think about i just want a reliable car that me and my daughter will be safe in can you help..Mileage was 10000 miles. Mazda Mazda6 2003 problem was reported in PERTH AMBOY, NJ. Original Owner. Vehicle was purchased on May 07, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Mazda Mazda6 2003 drive type:4WD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 35 mph. DEALER'S NAME: CRYSTAL AUTO MALL . DEALER'S TELEPHONE NUMBER: 732 968 1000 . DEALER'S CITY: GREENBROOK . DEALER'S STATE CODE: NJ.

Mazda Mazda6 2003 Engine And Engine Cooling Cooling System

Mazda Mazda6 2003 Engine And Engine Cooling Cooling System Review #10127275

MAZDA MAZDA6 2003 car safety problem was reported on Dec 22, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING:COOLING SYSTEM . check engine light came on car was hesitating in middle of highway felt like it wanted to shut off made it home next day car did not start had it towed to the dealer car kept in shop for a month dealer could not figure out the problem said it was a sensor in the engine that was defective got the car back but it since then continued to give me problems brought the car back to original dealer crystal mazda for 3 recalls in july04 and other problems, in april05 check engine light suddenly turns on in the middle of a busy highway car starts to jerk and just died car was towed to the dealer and they called me weeks later to tell me the engine seazed i have had a lemon law case with kimmel and silverman for a year now dealership have been very nasty to me as well as the manufacturer they do not want to fix the vehicle or give me a replacement i also requested a copy of an invoice describing the cause of the engine dying and diagnosis they refuse to do so i have become so ill because of this and have a child to think about i just want a reliable car that me and my daughter will be safe in can you help..Mileage was 10000 miles. Mazda Mazda6 2003 problem was reported in PERTH AMBOY, NJ. Original Owner. Vehicle was purchased on May 07, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Mazda Mazda6 2003 drive type:4WD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 35 mph. DEALER'S NAME: CRYSTAL AUTO MALL . DEALER'S TELEPHONE NUMBER: 732 968 1000 . DEALER'S CITY: GREENBROOK . DEALER'S STATE CODE: NJ.

Mazda Mazda6 2003 Engine And Engine Cooling Review #10127275

MAZDA MAZDA6 2003 car safety problem was reported on Dec 22, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING . check engine light came on car was hesitating in middle of highway felt like it wanted to shut off made it home next day car did not start had it towed to the dealer car kept in shop for a month dealer could not figure out the problem said it was a sensor in the engine that was defective got the car back but it since then continued to give me problems brought the car back to original dealer crystal mazda for 3 recalls in july04 and other problems, in april05 check engine light suddenly turns on in the middle of a busy highway car starts to jerk and just died car was towed to the dealer and they called me weeks later to tell me the engine seazed i have had a lemon law case with kimmel and silverman for a year now dealership have been very nasty to me as well as the manufacturer they do not want to fix the vehicle or give me a replacement i also requested a copy of an invoice describing the cause of the engine dying and diagnosis they refuse to do so i have become so ill because of this and have a child to think about i just want a reliable car that me and my daughter will be safe in can you help..Mileage was 10000 miles. Mazda Mazda6 2003 problem was reported in PERTH AMBOY, NJ. Original Owner. Vehicle was purchased on May 07, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Mazda Mazda6 2003 drive type:4WD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 35 mph. DEALER'S NAME: CRYSTAL AUTO MALL . DEALER'S TELEPHONE NUMBER: 732 968 1000 . DEALER'S CITY: GREENBROOK . DEALER'S STATE CODE: NJ.

Mazda Mazda6 2003 Engine And Engine Cooling Review #10129952

MAZDA MAZDA6 2003 car safety problem was reported on July 04, 2005.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING . dt: the consumer stated the engine hesitated when she hit the gas and when she is driving, it seemed to hesitate and then goes on. she said the check engine light came on. she has had it to the dealer three times. all this has happened in the last three weeks. she said that two months ago they tried to lock it and the horn started blowing. the dealer was unable to duplicate the problem. *jb.Vehicle Identification Number (VIN):1YVFP80C835. Mazda Mazda6 2003 problem was reported in HICKORY, NC. Original Owner. Vehicle was purchased on Jan 31, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. DEALER'S NAME: ROBERTS MAZDA . DEALER'S TELEPHONE NUMBER: 828-324-2700 . DEALER'S CITY: HICKORY . DEALER'S STATE CODE: NC. DEALER'S ZIPCODE: 28602 .

Mazda Mazda6 2003 Service Brakes, Hydraulic

Mazda Mazda6 2003 Service Brakes, Hydraulic Review #10130625

MAZDA MAZDA6 2003 car safety problem was reported on July 29, 2005.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES, HYDRAULIC . front (right) end squeaks/grinds mainly while turning, however has continued after straightening out. started around 10,000 miles. i've taken it in 3 different times to two different dealers. this last time (now at ~50,000) i was told it was a break pad problem and that: my break pads were 80% worn. my rotors needed to be turned. i was also now charged for this visit that still didn't fix the problem. *nm.0 person(s) were injured. 0 person(s) died.Mileage was 10000 miles. Vehicle Identification Number (VIN):1YVFP80D835. Mazda Mazda6 2003 problem was reported in FARMINGTON, MI. Original Owner. Vehicle was purchased on Apr 01, 2002. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. DEALER'S NAME: SUBURBAN IMPORTS OF FARMINGTON HILLS . DEALER'S TELEPHONE NUMBER: 248-471-0800 . DEALER'S CITY: FARMINGTON HILLS . DEALER'S STATE CODE: MI. DEALER'S ZIPCODE: 48335 .

Mazda Mazda6 2003 Engine And Engine Cooling Cooling System

Mazda Mazda6 2003 Engine And Engine Cooling Cooling System Review #10133791

MAZDA MAZDA6 2003 car safety problem was reported on Apr 01, 2005.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING:COOLING SYSTEM . i purchased my 2003 mazda6 in june of 2003. since then it has been in the shop for mutiple problems. several recalls of course, but the first major problem came when the car was about 1 year old and my radiator seam at the bottom seperated. they replaced the radiator. when i picked the car up my air conditioning was not working, so i returned the car and the problem was fixed at that time. april of 2005, my car only had about 19,000 miles on it my air conditioning started blowing hot air. i took it to the dealer and the stated that my freon was low and charged it up. i asked how that could be with a car as new as this one and they stated, it was normal. for a car that is less than 2 years old?? last week, august of 2005, once again my air is blowing hot,particulaly when sitting in an idle position,works better upon accleration. i took it to the dealer and they stated the control fan module was bad and replaced it,which by the way had already been replaced with a recall. as of augusst 22, 2005 my air is still not working properly. we went on a short trip and were stuck in a traffic jam. once again the air would not blow cold while we were sitting. i know this is not right because when we first got the car, the air worked great. i am really frustrated with this car,i just keep waiting for the next thing to go wrong. i have also had to replace my braked pads and had the left front rotor turned. i think mazda owes us all of us that have purchased these cars and had major problems a big apology . and should replace these vehicles, which i know will never happen..Mileage was 22812 miles. Vehicle Identification Number (VIN):1YVHP80D635. Mazda Mazda6 2003 problem was reported in HERMITAGE, TN. Original Owner. Vehicle was purchased on June 14, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Turbo. FUEL TYPE: BIFUEL. Mazda Mazda6 2003 TRANSMISSION TYPE: MAN . DEALER'S NAME: NELSON MAZDA . DEALER'S TELEPHONE NUMBER: 6158688100 . DEALER'S CITY: MADISON . DEALER'S STATE CODE: TN. DEALER'S ZIPCODE: 37115 .

Mazda Mazda6 2003 Service Brakes, Hydraulic

Mazda Mazda6 2003 Service Brakes, Hydraulic Review #10138252

MAZDA MAZDA6 2003 car safety problem was reported on Sept 26, 2005.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES, HYDRAULIC . i had a terrible experience couple of days ago. when i was driving back home in the midnight and in the middle of nowhere, my less than 2 and half years old mazda 6 start to make very loud annoying noise. i was scared to death at that time. later i found out there is a manufacture defect relating to the problem that i had experienced, which mazda has known the problem about a year ago. they even have a bulletin describe this problem and the title is '04-004/04 2003-2003 mazda 6 -front brake judder and /or brake moan noise'. they never made any recalls on this issue and leave this risk to their customer intentionally. *nm .0 person(s) were injured. 0 person(s) died.Mileage was 21000 miles. Vehicle Identification Number (VIN):1YVFP80C535. Mazda Mazda6 2003 problem was reported in NEWPORT, OR. Original Owner. Vehicle was purchased on Apr 20, 2003. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: MAN . VEHICLE SPEED: 45 mph. DEALER'S NAME: DIAMOND MAZDA .

Mazda Mazda6 2003 Air Bags

Mazda Mazda6 2003 Air Bags Review #10139588

MAZDA MAZDA6 2003 car safety problem was reported on Dec 20, 2003.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with AIR BAGS . rattles inside passengers compartment with 2003 mazda 6 sedan. rattles come from front passengers side close to the passenger airbag. dealer did not know where the origin of the rattles, it is becoming louder each day. worry it may cause failure of airbag during an accident. incident date was the original date when we noticed the rattles..Mazda Mazda6 2003 problem was reported in VANCOUVER, WA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2003 Steering Rack And Pinion

Mazda Mazda6 2003 Steering Rack And Pinion Review #10141668

MAZDA MAZDA6 2003 car safety problem was reported on Mar 01, 2004.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with STEERING:RACK AND PINION . failure of the rack & pinion steering twice in the last 1.5 years; march 2004 and again sept. 2005. needed to be replaced each time.replacement was done under warranty the first time[ at 20,000 miles]; the second time mazda paid for the part even though the car had 54,000 miles on it and was out of warranty; i paid for the labor..0 person(s) were injured. 0 person(s) died.Mazda Mazda6 2003 problem was reported in MURRYSVILLE, PA. Original Owner. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.

Mazda Mazda6 2003 Power Train Manual Transmission

Mazda Mazda6 2003 Power Train Manual Transmission Review #10146341

MAZDA MAZDA6 2003 car safety problem was reported on June 03, 2005.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:MANUAL TRANSMISSION . dt*: the contact stated there were several problems with the vehicle. the first problem involved the brake pads that were worn out and had to be replaced after 20,000 miles. the second problem dealt with manual transmission. sometimes the manual transmission shifted roughly. third problem, in cold weather, the engine surged and revved high for three seconds. the dealership told the contact the brake wear was normal. the dealership could not duplicate the other problems. *ak.Mileage was 21350 miles. Vehicle Identification Number (VIN):1YVFP80C535. Mazda Mazda6 2003 problem was reported in TOLEDO, OH. Original Owner. Vehicle was purchased on Nov 01, 2003. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: MAN . DEALER'S NAME: RALPH THAYER MAZDA . DEALER'S TELEPHONE NUMBER: 734-847-2275 . DEALER'S CITY: MONROE . DEALER'S STATE CODE: MI. DEALER'S ZIPCODE: 48161 .

Mazda Mazda6 2003 Service Brakes, Hydraulic Foundation Components Disc Pads

Mazda Mazda6 2003 Service Brakes, Hydraulic Foundation Components Disc Pads Review #10146341

MAZDA MAZDA6 2003 car safety problem was reported on June 03, 2005.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:PADS . dt*: the contact stated there were several problems with the vehicle. the first problem involved the brake pads that were worn out and had to be replaced after 20,000 miles. the second problem dealt with manual transmission. sometimes the manual transmission shifted roughly. third problem, in cold weather, the engine surged and revved high for three seconds. the dealership told the contact the brake wear was normal. the dealership could not duplicate the other problems. *ak.Mileage was 21350 miles. Vehicle Identification Number (VIN):1YVFP80C535. Mazda Mazda6 2003 problem was reported in TOLEDO, OH. Original Owner. Vehicle was purchased on Nov 01, 2003. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: MAN . DEALER'S NAME: RALPH THAYER MAZDA . DEALER'S TELEPHONE NUMBER: 734-847-2275 . DEALER'S CITY: MONROE . DEALER'S STATE CODE: MI. DEALER'S ZIPCODE: 48161 .

Mazda Mazda6 2003 Vehicle Speed Control

Mazda Mazda6 2003 Vehicle Speed Control Review #10146341

MAZDA MAZDA6 2003 car safety problem was reported on June 03, 2005.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with VEHICLE SPEED CONTROL . dt*: the contact stated there were several problems with the vehicle. the first problem involved the brake pads that were worn out and had to be replaced after 20,000 miles. the second problem dealt with manual transmission. sometimes the manual transmission shifted roughly. third problem, in cold weather, the engine surged and revved high for three seconds. the dealership told the contact the brake wear was normal. the dealership could not duplicate the other problems. *ak.Mileage was 21350 miles. Vehicle Identification Number (VIN):1YVFP80C535. Mazda Mazda6 2003 problem was reported in TOLEDO, OH. Original Owner. Vehicle was purchased on Nov 01, 2003. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: MAN . DEALER'S NAME: RALPH THAYER MAZDA . DEALER'S TELEPHONE NUMBER: 734-847-2275 . DEALER'S CITY: MONROE . DEALER'S STATE CODE: MI. DEALER'S ZIPCODE: 48161 .

Mazda Mazda6 2003 Electrical System Fuses And Circuit Breakers

Mazda Mazda6 2003 Electrical System Fuses And Circuit Breakers Review #10148549

MAZDA MAZDA6 2003 car safety problem was reported on Dec 01, 2005.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ELECTRICAL SYSTEM:FUSES AND CIRCUIT BREAKERS . multiple problems from carousel motors highway 1 west, iowa city iowa 52246. 319-354-2550 while changing oil they disconnected a hose which another dealer was able to find and repair. while talking the car in and having it in their possession it received $3,000 damage. they could not diagnose the problem in over 20 days. next they put a fuse box door cover on under warranty. in doing so they removed the sill cover on the driver's side. when they replaced the sill cover the drove the lock downs on the cover through the wiring harness. oblivious to what the had done they blamed me for the damage to the vehicle. carousel motors should not have a mazda franchise. it is not for the seemingly obvious reasons as stated but for the fact that a mr. pat linn the general manager for the dealership has called my place of employment raking me through the dirt to my manager at work to complain about me to my boss. he has turned this into a personal matter and not a business matter. is this a reaction of an adult? his owner needs to lock his heals together, release him from his possition, and have the dealership appologize for his misuse of his position. harrassment and slander are not and will not be tollerated. please forward this to mazda . *ak.Vehicle Identification Number (VIN):1YVHP80C835. Mazda Mazda6 2003 problem was reported in IOWA CITY, IA. Vehicle was purchased on Oct 15, 2003. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. DEALER'S NAME: CAROUSEL MOTORS . DEALER'S TELEPHONE NUMBER: 3193542550 . DEALER'S CITY: IOWA CITY . DEALER'S STATE CODE: IA. DEALER'S ZIPCODE: 52246 .

Mazda Mazda6 2003 Electrical System Wiring Interior/under Dash

Mazda Mazda6 2003 Electrical System Wiring Interior/under Dash Review #10148549

MAZDA MAZDA6 2003 car safety problem was reported on Dec 01, 2005.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ELECTRICAL SYSTEM:WIRING:INTERIOR/UNDER DASH . multiple problems from carousel motors highway 1 west, iowa city iowa 52246. 319-354-2550 while changing oil they disconnected a hose which another dealer was able to find and repair. while talking the car in and having it in their possession it received $3,000 damage. they could not diagnose the problem in over 20 days. next they put a fuse box door cover on under warranty. in doing so they removed the sill cover on the driver's side. when they replaced the sill cover the drove the lock downs on the cover through the wiring harness. oblivious to what the had done they blamed me for the damage to the vehicle. carousel motors should not have a mazda franchise. it is not for the seemingly obvious reasons as stated but for the fact that a mr. pat linn the general manager for the dealership has called my place of employment raking me through the dirt to my manager at work to complain about me to my boss. he has turned this into a personal matter and not a business matter. is this a reaction of an adult? his owner needs to lock his heals together, release him from his possition, and have the dealership appologize for his misuse of his position. harrassment and slander are not and will not be tollerated. please forward this to mazda . *ak.Vehicle Identification Number (VIN):1YVHP80C835. Mazda Mazda6 2003 problem was reported in IOWA CITY, IA. Vehicle was purchased on Oct 15, 2003. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. DEALER'S NAME: CAROUSEL MOTORS . DEALER'S TELEPHONE NUMBER: 3193542550 . DEALER'S CITY: IOWA CITY . DEALER'S STATE CODE: IA. DEALER'S ZIPCODE: 52246 .

Mazda Mazda6 2003 Air Bags Frontal

Mazda Mazda6 2003 Air Bags Frontal Review #10158027

MAZDA MAZDA6 2003 car safety problem was reported on May 22, 2006.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with AIR BAGS:FRONTAL . dt*: the contact stated after fainting, the vehicle struck a stop sign at 10 mph. the impact occurred in the center of the hood. the air bags didn't deploy until the consumer opened the driver's side door to exit the vehicle. the vehicle was towed to the dealership and was deemed totaled by the insurance company. there has been no inspection of the air bag problem. updated 6/16/2006 - *nm.Vehicle was involved in a crash. Mileage was 36000 miles. Vehicle Identification Number (VIN):1YVFP80C935. Mazda Mazda6 2003 problem was reported in SAN DIEGO, CA. Accident was reported to Police. Original Owner. Vehicle was purchased on Mar 30, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 10 mph. DEALER'S NAME: EL CAJON MAZDA . DEALER'S CITY: EL CAJON . DEALER'S STATE CODE: CA.

Mazda Mazda6 2003 Power Train Manual Transmission

Mazda Mazda6 2003 Power Train Manual Transmission Review #10159674

MAZDA MAZDA6 2003 car safety problem was reported on May 25, 2006.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:MANUAL TRANSMISSION . my wife was driving our 2003 mazda 6 with 56,000 miles to school on thursday morning on a busy 2-lane highway. she shifted (likely to 4th), and the manual transmission locked-up. fortunately, she is an experienced driver and was able to disengage the clutch and coast the car to the shoulder without incident. if she had been inexperienced, or if a shoulder had not been available, or if the car behind her had been closer, the outcome could have been tragic. regarding, the transmission, it had been maintained with all of the recommended fluid changes, and it was locked-up and damaged beyond economical repair. a used transmission was installed by the local mazda dealer at a cost of over $2,000. *nm.0 person(s) were injured. 0 person(s) died.Mileage was 56000 miles. Vehicle Identification Number (VIN):1YVHP80C735. Mazda Mazda6 2003 problem was reported in KNOXVILLE, TN. Vehicle was purchased on Nov 16, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: MAN . VEHICLE SPEED: 35 mph. DEALER'S NAME: TWIN CITY MAZDA . DEALER'S CITY: MARYVILLE . DEALER'S STATE CODE: TN.

Mazda Mazda6 2003 Service Brakes, Hydraulic

Mazda Mazda6 2003 Service Brakes, Hydraulic Review #10160620

MAZDA MAZDA6 2003 car safety problem was reported on June 23, 2006.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES, HYDRAULIC . when brakes are used there is a loud clicking noise. this has happened several times and when taken to the dealer was told that they could not duplicate the problem and that the brake hardware had already been replaced on this vehicle because of the grinding problem we had taken in for on several occasions previously. we had also had to take the car in 4+ times telling them that there was a problem with cold starting, getting a "we can not duplicate the problem"...the 5th time it had to be towed because the alternator went out. this is after they sold us a $120 battery because they said that was the problem. *jb.Mazda Mazda6 2003 problem was reported in BREMERTON, WA. Original Owner. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2003 Vehicle Speed Control

Mazda Mazda6 2003 Vehicle Speed Control Review #10163007

MAZDA MAZDA6 2003 car safety problem was reported on July 20, 2006.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with VEHICLE SPEED CONTROL . dt*: the contact stated that the vehicle accelerated on its own and on many occasions while driving 55 mph. this occurred even while applying the brakes. on one occasion, the vehicle almost hit a pedestrian. on another occasion, the vehicle ran through a red light. the vehicle was taken to the dealers who determined the problem was pertaining to the throttle body. the vehicle was repair however the problem persists..Mileage was 77000 miles. Mazda Mazda6 2003 problem was reported in MILFORD, NJ. Vehicle was purchased on Nov 01, 2003. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 55 mph. DEALER'S NAME: FLEMINGTON MAZADA .

Mazda Mazda6 2003 Air Bags

Mazda Mazda6 2003 Air Bags Review #10165671

MAZDA MAZDA6 2003 car safety problem was reported on Aug 05, 2006.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with AIR BAGS . i was in a car accident and out of 6 air bags all of them failed to come out. because of there failure i received various injuries that are keeping me from work. *nm.Vehicle was involved in a crash. 1 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVFP80C735. Mazda Mazda6 2003 problem was reported in GLOVERVILLE, SC. Accident was reported to Police. Vehicle was purchased on July 26, 2006. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 drive type:U. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. DEALER'S NAME: COMMUNITY TOYOTA . DEALER'S TELEPHONE NUMBER: 281-839-7700 . DEALER'S CITY: BAYTOWN . DEALER'S STATE CODE: TX. DEALER'S ZIPCODE: 77521 .

Mazda Mazda6 2003 Engine And Engine Cooling Engine

Mazda Mazda6 2003 Engine And Engine Cooling Engine Review #10179467

MAZDA MAZDA6 2003 car safety problem was reported on Jan 16, 2007.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING:ENGINE . after 4 previous repairs i started my car and my check engine light once again began to flash, this time flashing rapidly. i called the dealer who told me not to drive the car because the rapid flash means the car is unsafe. i was told i had a bad coil. after a $400 repair, i proceeded to drive the car home only to have the same light flash. the dealer then told me my cataliytic converters split. now i have a $4,600 repair job on a 2003. please check to see if there are any other complaints on this vehicle. i have had nothing but problems with this car for the past year. thank you. *nm.Vehicle Identification Number (VIN):1YVFP80D335. Mazda Mazda6 2003 problem was reported in MOORES HILL, IN. Original Owner. Vehicle was purchased on Jan 10, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 0 mph. DEALER'S NAME: KERRY MAZDA . DEALER'S TELEPHONE NUMBER: 8593718191 . DEALER'S CITY: FLORENCE . DEALER'S STATE CODE: KY. DEALER'S ZIPCODE: 41042 .

Mazda Mazda6 2003 Engine And Engine Cooling Engine Review #10188515

MAZDA MAZDA6 2003 car safety problem was reported on Oct 31, 2005.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING:ENGINE . i purchased my mazda in 2003. since the purchase everything was fine until the end of oct. 2005 my engine light came on and my car was shaking, and my rpms where malfunctioning (going up and down, then back up again). i took my car to the dealership and was informed that my car jumped time, my car had under 45k miles. they fixed it, but in the beginning of nov. 2005, not even a month later, my car did the same thing, but this time i was told that the bolts in my engine needed to be replace. then in the summer of 2006 i had a vacuum leak, my car would start and stop, i had that repaired at repair shop of my own chose, since my warranty was up. now in april 2007, i was informed by a repair shop, of my own chose, that i thrown a rod in my motor. *tr.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVFP80C235. Mazda Mazda6 2003 problem was reported in MUSKOGEE, OK. Original Owner. Vehicle was purchased on Sept 20, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. DEALER'S NAME: NELSON MAZDA . DEALER'S TELEPHONE NUMBER: 918-296-7800 . DEALER'S CITY: TULSA . DEALER'S STATE CODE: OK. DEALER'S ZIPCODE: 74133 .

Mazda Mazda6 2003 Wheels Lugs/nuts/bolts

Mazda Mazda6 2003 Wheels Lugs/nuts/bolts Review #10189175

MAZDA MAZDA6 2003 car safety problem was reported on Apr 27, 2007.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with WHEELS:LUGS/NUTS/BOLTS . rear wheel studs. one of my rear wheel lug bolts is cracked up in the lug nut and another one broke off and is missing.this was an accident waiting to happen. i can't even get my car inspected because our local auto parts store does not carry this item. *tr .Vehicle Identification Number (VIN):1YVFP80C435. Mazda Mazda6 2003 problem was reported in CLASYVILLE, PA. Original Owner. Vehicle was purchased on May 28, 2003. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO.

Mazda Mazda6 2003 Power Train Automatic Transmission

Mazda Mazda6 2003 Power Train Automatic Transmission Review #10201072

MAZDA MAZDA6 2003 car safety problem was reported on Mar 26, 2005.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . my car has had all of it's routine maintenance done. at 30k i had to replace the transmission at 20 i had to replace the alternator. at 60k i have had to replace the transmission again! at 60k i had to replace a transaxle something or another . now at 66k it is doing all of the same things that it was doing before the transmissions went out, and it's because "i need a new air filter, spark plugs, and fuel filter" the car jerks very hard when slowing down on the freeway the rpm race, like it won't gear down. when i put it in park it's as if i am pressing the gas pedal down and revving the engine. but the car is in park, and there is no pressure on the gas pedal what so ever! i hate this car, and recommend no one to buy one! i will be voicing my opinion of the car in the car windows, and telling everyone i know about the poor quality of this car. you would think that paying 27k for a vehicle that it would last!*jb.Vehicle Identification Number (VIN):1YVFP80C235. Mazda Mazda6 2003 problem was reported in SOUTH HOUSTON, TX. Original Owner. Vehicle was purchased on Jan 03, 2004. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 drive type:U. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. DEALER'S NAME: JEFF HAAS . DEALER'S CITY: HOUSTON . DEALER'S STATE CODE: TX.

Mazda Mazda6 2003 Electrical System Alternator/generator/regulator

Mazda Mazda6 2003 Electrical System Alternator/generator/regulator Review #10201072

MAZDA MAZDA6 2003 car safety problem was reported on Mar 26, 2005.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ELECTRICAL SYSTEM:ALTERNATOR/GENERATOR/REGULATOR . my car has had all of it's routine maintenance done. at 30k i had to replace the transmission at 20 i had to replace the alternator. at 60k i have had to replace the transmission again! at 60k i had to replace a transaxle something or another . now at 66k it is doing all of the same things that it was doing before the transmissions went out, and it's because "i need a new air filter, spark plugs, and fuel filter" the car jerks very hard when slowing down on the freeway the rpm race, like it won't gear down. when i put it in park it's as if i am pressing the gas pedal down and revving the engine. but the car is in park, and there is no pressure on the gas pedal what so ever! i hate this car, and recommend no one to buy one! i will be voicing my opinion of the car in the car windows, and telling everyone i know about the poor quality of this car. you would think that paying 27k for a vehicle that it would last!*jb.Vehicle Identification Number (VIN):1YVFP80C235. Mazda Mazda6 2003 problem was reported in SOUTH HOUSTON, TX. Original Owner. Vehicle was purchased on Jan 03, 2004. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 drive type:U. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. DEALER'S NAME: JEFF HAAS . DEALER'S CITY: HOUSTON . DEALER'S STATE CODE: TX.

Mazda Mazda6 2003 Power Train Clutch Assembly Pedal/linkage

Mazda Mazda6 2003 Power Train Clutch Assembly Pedal/linkage Review #10203936

MAZDA MAZDA6 2003 car safety problem was reported on Sept 20, 2007.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:CLUTCH ASSEMBLY:PEDAL/LINKAGE . i won a 2003 mazda6s and i am having issues with my clutch. i first changed the clutch at 18,000 miles and i had to argue with mazda on that because the clutch is only covered for 1yr/12,000 miles. now at 35,000 and change miles my clutch has failed again. mazda has no recalled this issue with the clutch and in my opinion it should be a recall. i am a member at http://forum.mazda6club.com/), and there you can do a search and fine hundreds of people with the same clutch issue. the failure of a clutch from normal wear and tear does not normally occur so early in a car's life (see www.drivetrain.com/clutcharticle.html). in addition the wear of the clutch under normal conditions should not be the customer's fault and mazda has not acknowledged this. i would like mazda to understand that there is an issue with the clutch in these cars thank you for your time. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 50 miles. Vehicle Identification Number (VIN):1YVFP80D835. Mazda Mazda6 2003 problem was reported in FLUSHING, NY. Original Owner. Vehicle was purchased on Apr 18, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: MAN . VEHICLE SPEED: 40 mph.

Mazda Mazda6 2003 Tires Tread/belt

Mazda Mazda6 2003 Tires Tread/belt Review #10213149

MAZDA MAZDA6 2003 car safety problem was reported on Dec 22, 2007.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with TIRES:TREAD/BELT . tire tread separation of cooper cs4 touring 215/50r17 91v high speed radial. dot 3d6a clt 520/a/a. while driving on the interstate highway at approximately 70 mph a slapping sound developed. subsequent stops and checks revealed the tread was separating on the outside edge of the right front tire. loose rubber knocked holes in the outer edge of the inner fender well. along the outer edge of the tire i was able to insert my finger up under the tread. this condition had the appearance of the tire being a re-tread instead of a new tire. *tr.0 person(s) were injured. 0 person(s) died.Mazda Mazda6 2003 problem was reported in BOONE, NC. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2003 Power Train Clutch Assembly Pedal/linkage

Mazda Mazda6 2003 Power Train Clutch Assembly Pedal/linkage Review #10217398

MAZDA MAZDA6 2003 car safety problem was reported on Feb 06, 2008.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:CLUTCH ASSEMBLY:PEDAL/LINKAGE . we purchased a 2003 mazda6 new from a mazda dealership. we had some issue with the car shuddering when engaging the clutch and called the dealership. we were told that the issue was related to "variable valve timing" and told to rev it a little higher when engaging the clutch. at approx 40,000 miles the clutch wore out and we tried to contact mazda and file a claim, but we were denied. i paid to have the clutch repaired, and now have approx. 60,000 miles on the vehicle. recently, the whole clutch pedal assembly has malfunctioned and is causing significant issues with the engagement of the gears. several times the car has not gone into gear and my wife got stuck in the middle of an intersection the other day and was almost struck by another vehicle because she could not get the car in gear. i have again contacted mazda and have again been told that they will most likely not cover my issues... *tr.0 person(s) were injured. 0 person(s) died.Mileage was 40000 miles. Vehicle Identification Number (VIN):1YVFP80C635. Mazda Mazda6 2003 problem was reported in GLEN ALLEN, VA. Original Owner. Vehicle was purchased on Apr 01, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: MAN . VEHICLE SPEED: 0 mph. DEALER'S NAME: PEARSON LINCOLN MERCURY MAZDA . DEALER'S TELEPHONE NUMBER: 8049650300 . DEALER'S CITY: RICHMOND . DEALER'S STATE CODE: VA.

Mazda Mazda6 2003 Suspension Front

Mazda Mazda6 2003 Suspension Front Review #10225397

MAZDA MAZDA6 2003 car safety problem was reported on Jan 08, 2008.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with SUSPENSION:FRONT . tl*the contact owns a 2003 mazda 6. the contact heard a loud noise coming from the front passenger side of the vehicle every time she drives over a bump or makes a turn. she has had several repair shops inspect the vehicle and attempt to remedy the failure. she has had both front and rear brakes, rotors, and tires replaced. one mechanic stated that the pistons needed to be replaced as well. the speed, vin, and engine size were unknown. the failure mileage was 81,000 and current mileage was 87,000..0 person(s) were injured. 0 person(s) died.Mileage was 81000 miles. Mazda Mazda6 2003 problem was reported in BLACKLICK, OH. Original Owner. Vehicle was purchased on Dec 22, 2002. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. DEALER'S NAME: BOB BOYD . DEALER'S CITY: LANCASTER . DEALER'S STATE CODE: OH.

Mazda Mazda6 2003 Suspension Rear

Mazda Mazda6 2003 Suspension Rear Review #10227638

MAZDA MAZDA6 2003 car safety problem was reported on Apr 01, 2008.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with SUSPENSION:REAR . i own a 2003 mazda 6. about a month ago i started hearing loud noises coming from the front axle area when i turn or drive over bumps. my brakes and tires are in good shape. i was first told that i needed new struts. a second inspection however revealed no problem with my struts. mechanic seems to be baffled as to what the problem is. my car is a v6 mazda 6s. 5 speed. problem started at 82,000 miles. current mileage is about 84,000. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 82000 miles. Mazda Mazda6 2003 problem was reported in LOS ANGELES, CA, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 5 mph.

Mazda Mazda6 2003 Suspension Review #10230216

MAZDA MAZDA6 2003 car safety problem was reported on June 01, 2008.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with SUSPENSION . the vehicle is a 2003 mazda 6. 2 front, right control arms are bad. *tr .Vehicle Identification Number (VIN):1YVHP80D035. Mazda Mazda6 2003 problem was reported in GREEN BAY, WI. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS.

Mazda Mazda6 2003 Steering

Mazda Mazda6 2003 Steering Review #10230216

MAZDA MAZDA6 2003 car safety problem was reported on June 01, 2008.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with STEERING . the vehicle is a 2003 mazda 6. 2 front, right control arms are bad. *tr .Vehicle Identification Number (VIN):1YVHP80D035. Mazda Mazda6 2003 problem was reported in GREEN BAY, WI. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS.

Mazda Mazda6 2003 Air Bags Frontal

Mazda Mazda6 2003 Air Bags Frontal Review #10230270

MAZDA MAZDA6 2003 car safety problem was reported on June 05, 2008.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with AIR BAGS:FRONTAL . my daughter was involved in a serious rollover accident last thursday and the car's airbags did not deploy. *tr.Vehicle was involved in a crash. 0 person(s) were injured. 0 person(s) died.Mileage was 43000 miles. Vehicle Identification Number (VIN):1YVFP80C635. Mazda Mazda6 2003 problem was reported in SAN DIEGO, CA. Accident was reported to Police. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. VEHICLE SPEED: 65 mph.

Mazda Mazda6 2003 Power Train Driveline

Mazda Mazda6 2003 Power Train Driveline Review #10231005

MAZDA MAZDA6 2003 car safety problem was reported on June 11, 2008.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:DRIVELINE . cv joint boot failed and wore a hole in the brake line. most of the ability to brake the vehicle was lost. there did not appear to be a split brake system. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 129000 miles. Vehicle Identification Number (VIN):1YVFP80C435. Mazda Mazda6 2003 problem was reported in GALION, OH. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 60 mph.

Mazda Mazda6 2003 Service Brakes, Hydraulic

Mazda Mazda6 2003 Service Brakes, Hydraulic Review #10231005

MAZDA MAZDA6 2003 car safety problem was reported on June 11, 2008.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES, HYDRAULIC . cv joint boot failed and wore a hole in the brake line. most of the ability to brake the vehicle was lost. there did not appear to be a split brake system. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 129000 miles. Vehicle Identification Number (VIN):1YVFP80C435. Mazda Mazda6 2003 problem was reported in GALION, OH. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 60 mph.

Mazda Mazda6 2003 Engine And Engine Cooling Engine

Mazda Mazda6 2003 Engine And Engine Cooling Engine Review #10233697

MAZDA MAZDA6 2003 car safety problem was reported on Feb 05, 2004.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING:ENGINE . tl*the contact owns a 2003 mazda 6. while driving approximately 35 mph, the vehicle vibrated and hesitated without warning. the contact pulled over to the side of the road and the vehicle was towed to an authorized dealer. the technician stated that the failure was related to the engine, which was replaced. in addition, the vehicle would shift roughly from first to second gear. he experienced failure with the exterior lights and the window operating mechanisms. the vehicle was taken to an authorized dealer and a diagnostic test was performed. the technician stated that the aftermarket electronic components were possibly the causes of the failure. the vehicle was taken to an independent mechanic, who replaced the following components: alternator, battery, exterior lights, and four window operating mechanisms. also, the computer module, transmission, and air conditioner modules were replaced. the failure mileage was 85,000 and current mileage was 94,000..0 person(s) were injured. 0 person(s) died.Mileage was 85000 miles. Vehicle Identification Number (VIN):1YVFP80C035. Mazda Mazda6 2003 problem was reported in OCEANSIDE, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 35 mph.

Mazda Mazda6 2003 Electrical System

Mazda Mazda6 2003 Electrical System Review #10233697

MAZDA MAZDA6 2003 car safety problem was reported on Feb 05, 2004.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ELECTRICAL SYSTEM . tl*the contact owns a 2003 mazda 6. while driving approximately 35 mph, the vehicle vibrated and hesitated without warning. the contact pulled over to the side of the road and the vehicle was towed to an authorized dealer. the technician stated that the failure was related to the engine, which was replaced. in addition, the vehicle would shift roughly from first to second gear. he experienced failure with the exterior lights and the window operating mechanisms. the vehicle was taken to an authorized dealer and a diagnostic test was performed. the technician stated that the aftermarket electronic components were possibly the causes of the failure. the vehicle was taken to an independent mechanic, who replaced the following components: alternator, battery, exterior lights, and four window operating mechanisms. also, the computer module, transmission, and air conditioner modules were replaced. the failure mileage was 85,000 and current mileage was 94,000..0 person(s) were injured. 0 person(s) died.Mileage was 85000 miles. Vehicle Identification Number (VIN):1YVFP80C035. Mazda Mazda6 2003 problem was reported in OCEANSIDE, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 35 mph.

Mazda Mazda6 2003 Latches/locks/linkages

Mazda Mazda6 2003 Latches/locks/linkages Review #10233697

MAZDA MAZDA6 2003 car safety problem was reported on Feb 05, 2004.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with LATCHES/LOCKS/LINKAGES . tl*the contact owns a 2003 mazda 6. while driving approximately 35 mph, the vehicle vibrated and hesitated without warning. the contact pulled over to the side of the road and the vehicle was towed to an authorized dealer. the technician stated that the failure was related to the engine, which was replaced. in addition, the vehicle would shift roughly from first to second gear. he experienced failure with the exterior lights and the window operating mechanisms. the vehicle was taken to an authorized dealer and a diagnostic test was performed. the technician stated that the aftermarket electronic components were possibly the causes of the failure. the vehicle was taken to an independent mechanic, who replaced the following components: alternator, battery, exterior lights, and four window operating mechanisms. also, the computer module, transmission, and air conditioner modules were replaced. the failure mileage was 85,000 and current mileage was 94,000..0 person(s) were injured. 0 person(s) died.Mileage was 85000 miles. Vehicle Identification Number (VIN):1YVFP80C035. Mazda Mazda6 2003 problem was reported in OCEANSIDE, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 35 mph.

Mazda Mazda6 2003 Exterior Lighting

Mazda Mazda6 2003 Exterior Lighting Review #10233697

MAZDA MAZDA6 2003 car safety problem was reported on Feb 05, 2004.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with EXTERIOR LIGHTING . tl*the contact owns a 2003 mazda 6. while driving approximately 35 mph, the vehicle vibrated and hesitated without warning. the contact pulled over to the side of the road and the vehicle was towed to an authorized dealer. the technician stated that the failure was related to the engine, which was replaced. in addition, the vehicle would shift roughly from first to second gear. he experienced failure with the exterior lights and the window operating mechanisms. the vehicle was taken to an authorized dealer and a diagnostic test was performed. the technician stated that the aftermarket electronic components were possibly the causes of the failure. the vehicle was taken to an independent mechanic, who replaced the following components: alternator, battery, exterior lights, and four window operating mechanisms. also, the computer module, transmission, and air conditioner modules were replaced. the failure mileage was 85,000 and current mileage was 94,000..0 person(s) were injured. 0 person(s) died.Mileage was 85000 miles. Vehicle Identification Number (VIN):1YVFP80C035. Mazda Mazda6 2003 problem was reported in OCEANSIDE, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 35 mph.

Mazda Mazda6 2003 Power Train Automatic Transmission

Mazda Mazda6 2003 Power Train Automatic Transmission Review #10233697

MAZDA MAZDA6 2003 car safety problem was reported on Feb 05, 2004.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . tl*the contact owns a 2003 mazda 6. while driving approximately 35 mph, the vehicle vibrated and hesitated without warning. the contact pulled over to the side of the road and the vehicle was towed to an authorized dealer. the technician stated that the failure was related to the engine, which was replaced. in addition, the vehicle would shift roughly from first to second gear. he experienced failure with the exterior lights and the window operating mechanisms. the vehicle was taken to an authorized dealer and a diagnostic test was performed. the technician stated that the aftermarket electronic components were possibly the causes of the failure. the vehicle was taken to an independent mechanic, who replaced the following components: alternator, battery, exterior lights, and four window operating mechanisms. also, the computer module, transmission, and air conditioner modules were replaced. the failure mileage was 85,000 and current mileage was 94,000..0 person(s) were injured. 0 person(s) died.Mileage was 85000 miles. Vehicle Identification Number (VIN):1YVFP80C035. Mazda Mazda6 2003 problem was reported in OCEANSIDE, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 35 mph.

Mazda Mazda6 2003 Service Brakes, Hydraulic

Mazda Mazda6 2003 Service Brakes, Hydraulic Review #10236412

MAZDA MAZDA6 2003 car safety problem was reported on July 13, 2008.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES, HYDRAULIC . tl*the contact owns a 2003 mazda 6. the contact stated that it takes an extended period of time to stop the vehicle when the brake pedal is depressed. he also heard a loud grinding noise when attempting to stop the vehicle. the contact took the vehicle to a local repair shop and they stated that the brake shoes dug into the rotors. as a result, the rotors needed to be replaced. the vehicle was repaired at the cost of $289. he notified the manufacturer in reference to premature wear of the rotors, but was not provided with any assistance. the vin was unknown. the failure and current mileages were 25,000. .0 person(s) were injured. 0 person(s) died.Mileage was 25000 miles. Mazda Mazda6 2003 problem was reported in TUSTIN, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2003 Structure

Mazda Mazda6 2003 Structure Review #10237239

MAZDA MAZDA6 2003 car safety problem was reported on June 01, 2008.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with STRUCTURE . tl*the contact owns a 2003 mazda 6. the contact stated that the paint was blistered on the fender on the rear passenger side of the vehicle. the dealer stated that they were aware of the corrosion on the rear fender. the dealer referred the contact to a body shop for repair; however, he took the vehicle to his body shop instead. the mechanic inspected the fender and pieces of it came off in his hand. the mechanic repaired three holes in the rear passenger side fender. the failure mileage was 80,000 and current mileage was 85,000. updated 08/23/08. lj the fender rusted in 3 places. updated 08/25/08 *jb.0 person(s) were injured. 0 person(s) died.Mileage was 80000 miles. Vehicle Identification Number (VIN):1YVFP80C135. Mazda Mazda6 2003 problem was reported in UNIONTOWN, OH. Vehicle was purchased on June 28, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. DEALER'S NAME: PARK MAZDA . DEALER'S TELEPHONE NUMBER: 330-645-7275 . DEALER'S CITY: AKRON . DEALER'S STATE CODE: OH. DEALER'S ZIPCODE: 44319 .

Mazda Mazda6 2003 Fuel System, Gasoline Delivery

Mazda Mazda6 2003 Fuel System, Gasoline Delivery Review #10237320

MAZDA MAZDA6 2003 car safety problem was reported on Aug 07, 2008.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with FUEL SYSTEM, GASOLINE:DELIVERY . 2003 mazda 6 recall 1403l, campaign # 03v531000, on my vehicle supposedly was repaired in baton rouge at diamond mazda in 2004, but car is leaking in the same area that was a problem to begin with now. so the workmanship where they repair the seal is not very good. four years later i buy the car and it is poor gas on the top of my gas tank out of the seal around the fuel pump which just happens to be right under where my child sits. so i've been in a time bomb just waiting to go off. no one can give me proof or paper work of where this recall has been taken care of. now suppose that it did blow up and kill or injure myself and my 3 year old daughter. wouldn't mazda be at fault for not properly repairing the vehicle? *tr.0 person(s) were injured. 0 person(s) died.Mileage was 128000 miles. Vehicle Identification Number (VIN):1YVFP80C835. Mazda Mazda6 2003 problem was reported in BALL, LA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2003 Fuel System, Gasoline Review #10237320

MAZDA MAZDA6 2003 car safety problem was reported on Aug 07, 2008.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with FUEL SYSTEM, GASOLINE . 2003 mazda 6 recall 1403l, campaign # 03v531000, on my vehicle supposedly was repaired in baton rouge at diamond mazda in 2004, but car is leaking in the same area that was a problem to begin with now. so the workmanship where they repair the seal is not very good. four years later i buy the car and it is poor gas on the top of my gas tank out of the seal around the fuel pump which just happens to be right under where my child sits. so i've been in a time bomb just waiting to go off. no one can give me proof or paper work of where this recall has been taken care of. now suppose that it did blow up and kill or injure myself and my 3 year old daughter. wouldn't mazda be at fault for not properly repairing the vehicle? *tr.0 person(s) were injured. 0 person(s) died.Mileage was 128000 miles. Vehicle Identification Number (VIN):1YVFP80C835. Mazda Mazda6 2003 problem was reported in BALL, LA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2003 Unknown Or Other

Mazda Mazda6 2003 Unknown Or Other Review #10239181

MAZDA MAZDA6 2003 car safety problem was reported on Aug 21, 2008.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with UNKNOWN OR OTHER . my complaint is with the service center in medford ny mazda. they had my car for a total of 2 yrs. and could not fix there was no accident. *tr.Mazda Mazda6 2003 problem was reported in CORAM 11727, NY. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2003 Vehicle Speed Control

Mazda Mazda6 2003 Vehicle Speed Control Review #10239700

MAZDA MAZDA6 2003 car safety problem was reported on Aug 23, 2008.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with VEHICLE SPEED CONTROL . tl*the contact owns a 2003 mazda 6. while driving approximately 20 mph, the contact applied pressure to the brake pedal several times before the vehicle slowed down. the vehicle accelerated without the accelerator pedal being depressed. there were no warning indicators illuminated on the instrument panel. the vehicle was taken to an independent mechanic and it was concluded that the failure was related to a defective throttle; however, the vehicle began operating normally after the diagnosis. the technician recommended that the vehicle be taken to an authorized dealer. the vin was unknown. the failure and current mileages were 81,000. updated 10/16/08. *lj.0 person(s) were injured. 0 person(s) died.Mileage was 81000 miles. Vehicle Identification Number (VIN):1YVFP80C835. Mazda Mazda6 2003 problem was reported in KINGMAN, AZ. Vehicle was purchased on Apr 01, 2004. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 20 mph. DEALER'S NAME: COURTESY . DEALER'S TELEPHONE NUMBER: 702-221-8000 . DEALER'S CITY: LAS VEGAS . DEALER'S STATE CODE: NV.

Mazda Mazda6 2003 Engine And Engine Cooling

Mazda Mazda6 2003 Engine And Engine Cooling Review #10239995

MAZDA MAZDA6 2003 car safety problem was reported on Aug 25, 2008.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING . since i first purchased my mazda there has been a faulty fan control module that shorts out my computer. this time the vehicle forced my into an intersection with my grandchildren in the vehicle. it could have been a serious accident. i could keep my vehicle from moving even with the brake on. *tr.Mileage was 3000 miles. Vehicle Identification Number (VIN):1YVFP80D035. Mazda Mazda6 2003 problem was reported in BAKERSFIELD, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 40 mph.

Mazda Mazda6 2003 Tires

Mazda Mazda6 2003 Tires Review #10242431

MAZDA MAZDA6 2003 car safety problem was reported on May 15, 2006.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with TIRES . beginning in 2006, my 2003 mazda 6 would randomly experience power failure while driving. this was both scary and dangerous. i would be driving, the car would completely loose power with no warning and all the lights on the dashboard would come on. i would have to pull over, turn my car off and back on, and then it would work fine till it randomly happened again. obviously loosing power at a high speed is extremely dangerous for both myself and the other drivers. i took it to the dealership many times and they were never able to determine a cause. i brought my car to the dealership over 10 times for this behavior. finally in august 2008, i was reading on a mazda message board that this behavior is caused by a bad throttle body. there was even a mazda service bulletin issued for it in 2006 (bulletins 01-016/06 last issued may 18, 2006). i called the dealership, had the throttle body replaced and have not experienced this behavior since. the service bulletin had serial numbers of bad throttle bodies listed on it, mine was one of them. i believe that this should be a mazda recall, not just a service bulletin, as dealerships do not even seem to be aware of the problem and it the car is extremely dangerous if the throttle body fails. *tr.Mileage was 61000 miles. Vehicle Identification Number (VIN):1YVFP80D335. Mazda Mazda6 2003 problem was reported in PHOENIX, AZ. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 45 mph.

Mazda Mazda6 2003 Engine And Engine Cooling

Mazda Mazda6 2003 Engine And Engine Cooling Review #10242431

MAZDA MAZDA6 2003 car safety problem was reported on May 15, 2006.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING . beginning in 2006, my 2003 mazda 6 would randomly experience power failure while driving. this was both scary and dangerous. i would be driving, the car would completely loose power with no warning and all the lights on the dashboard would come on. i would have to pull over, turn my car off and back on, and then it would work fine till it randomly happened again. obviously loosing power at a high speed is extremely dangerous for both myself and the other drivers. i took it to the dealership many times and they were never able to determine a cause. i brought my car to the dealership over 10 times for this behavior. finally in august 2008, i was reading on a mazda message board that this behavior is caused by a bad throttle body. there was even a mazda service bulletin issued for it in 2006 (bulletins 01-016/06 last issued may 18, 2006). i called the dealership, had the throttle body replaced and have not experienced this behavior since. the service bulletin had serial numbers of bad throttle bodies listed on it, mine was one of them. i believe that this should be a mazda recall, not just a service bulletin, as dealerships do not even seem to be aware of the problem and it the car is extremely dangerous if the throttle body fails. *tr.Mileage was 61000 miles. Vehicle Identification Number (VIN):1YVFP80D335. Mazda Mazda6 2003 problem was reported in PHOENIX, AZ. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 45 mph.

Mazda Mazda6 2003 Fuel System, Gasoline

Mazda Mazda6 2003 Fuel System, Gasoline Review #10256437

MAZDA MAZDA6 2003 car safety problem was reported on Jan 01, 2009.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with FUEL SYSTEM, GASOLINE . my car has had 4 recalls. i purchased the car in 2006 not knowing that parts had been recalled 3 times. i recently fixed a problem in my car that i feel make have had something to do with recall #3 , the fuel sender unit. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 86900 miles. Vehicle Identification Number (VIN):1YVFP80D835. Mazda Mazda6 2003 problem was reported in INDIANAPPOLIS, IN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 30 mph.

Mazda Mazda6 2003 Engine And Engine Cooling

Mazda Mazda6 2003 Engine And Engine Cooling Review #10256950

MAZDA MAZDA6 2003 car safety problem was reported on Jan 10, 2009.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING . engine seized up as it was sitting in driveway warming up. oil was all over the driveway under the car after the seized up. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 51800 miles. Vehicle Identification Number (VIN):1YVFP80C435. Mazda Mazda6 2003 problem was reported in ROCHESTER, MN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Mazda Mazda6 2003 Engine And Engine Cooling Exhaust System

Mazda Mazda6 2003 Engine And Engine Cooling Exhaust System Review #10269003

MAZDA MAZDA6 2003 car safety problem was reported on May 10, 2005.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING:EXHAUST SYSTEM . engine needed to be replaced twice within less than 5 1/2 yrs. transmission needed to be replaced within 6yrs. brakes needed to be replaced every year and a half. interior cheaply made. all part on this vehicle are plastic and brake very easy. motor mounts needed to be replace within 4 yrs. this vehicle is a owners nightmare . i would never recommended anyone to purchase this car. repairs cost more than the car is worth. engine repair $6000.00, motor mounts $900, transmission $2400-$4800, brakes $400, and the cost goes on. (lemon). *tr.Mileage was 300000 miles. Mazda Mazda6 2003 problem was reported in N LAS VEGAS, NV. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 35 mph.

Mazda Mazda6 2003 Power Train Automatic Transmission

Mazda Mazda6 2003 Power Train Automatic Transmission Review #10269003

MAZDA MAZDA6 2003 car safety problem was reported on May 10, 2005.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . engine needed to be replaced twice within less than 5 1/2 yrs. transmission needed to be replaced within 6yrs. brakes needed to be replaced every year and a half. interior cheaply made. all part on this vehicle are plastic and brake very easy. motor mounts needed to be replace within 4 yrs. this vehicle is a owners nightmare . i would never recommended anyone to purchase this car. repairs cost more than the car is worth. engine repair $6000.00, motor mounts $900, transmission $2400-$4800, brakes $400, and the cost goes on. (lemon). *tr.Mileage was 300000 miles. Mazda Mazda6 2003 problem was reported in N LAS VEGAS, NV. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 35 mph.

Mazda Mazda6 2003 Vehicle Speed Control

Mazda Mazda6 2003 Vehicle Speed Control Review #10308054

MAZDA MAZDA6 2003 car safety problem was reported on Aug 05, 2009.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with VEHICLE SPEED CONTROL . while driving home from my chardon, oh office on either aug 5 or 6, 2009 at 35 mph my car's rpm needle started jumping and the car's "gas pressure" felt like it was hicupping. the rpm needle jumped from @2 to 4 twice, then the car started steadily accelerating in speed. the brake pedal at this time felt "hard" and the car was "fighting against my attempt to slow down" and the rpm's were still trying to accelerate. i imagine if i pushed on the brake and the gas pedal at the same time, it would simulate the way it felt. i also have a manual shift mode on my car and used it to more effectively slow down (vs using the brake) but at the same time the car was still trying to accelerate, but couldn't because i was in a lower gear/manual mode. and i remember while in manual gear 1, my car was lurching me back and forth in my seat as i drove through my neighborhood to get home, and my foot was off the gas pedal! on aug 12th, 2009 i mentioned this event to a mitsubishi dealer's mechanic (friend of my father) who was replacing my power steering line, he took a look at my car but said it seemed fine. my husband has been driving that car since that event, because i am afraid of it happening again. the car has not done this while my husband has been driving it. not to sound like an oddball, but if i didn't know better i would have said my car was acting possessed, like the movie "christine". i have to think that there is some correlation to what my car did and what is going on with toyota. my husband is an electrical engineer and he used to work for grob systems, who does engineering for multiple automobile manufacturers, and i wonder if mazda has some same system in their automobile's as toyota and if it was engineered by the same supplier. i would swear on a bible that this happened to me with my car. (my husband left grob to move to cleveland and marry me). it sucks having this car now, it is paid off, i'm afraid to drive it, and i don't want to sell to an innocent stranger. *tr.Mileage was 71000 miles. Vehicle Identification Number (VIN):1YVFP80CX35. Mazda Mazda6 2003 problem was reported in PAINESVILLE, OH. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 35 mph.

Mazda Mazda6 2003 Service Brakes, Electric

Mazda Mazda6 2003 Service Brakes, Electric Review #10308054

MAZDA MAZDA6 2003 car safety problem was reported on Aug 05, 2009.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES, ELECTRIC . while driving home from my chardon, oh office on either aug 5 or 6, 2009 at 35 mph my car's rpm needle started jumping and the car's "gas pressure" felt like it was hicupping. the rpm needle jumped from @2 to 4 twice, then the car started steadily accelerating in speed. the brake pedal at this time felt "hard" and the car was "fighting against my attempt to slow down" and the rpm's were still trying to accelerate. i imagine if i pushed on the brake and the gas pedal at the same time, it would simulate the way it felt. i also have a manual shift mode on my car and used it to more effectively slow down (vs using the brake) but at the same time the car was still trying to accelerate, but couldn't because i was in a lower gear/manual mode. and i remember while in manual gear 1, my car was lurching me back and forth in my seat as i drove through my neighborhood to get home, and my foot was off the gas pedal! on aug 12th, 2009 i mentioned this event to a mitsubishi dealer's mechanic (friend of my father) who was replacing my power steering line, he took a look at my car but said it seemed fine. my husband has been driving that car since that event, because i am afraid of it happening again. the car has not done this while my husband has been driving it. not to sound like an oddball, but if i didn't know better i would have said my car was acting possessed, like the movie "christine". i have to think that there is some correlation to what my car did and what is going on with toyota. my husband is an electrical engineer and he used to work for grob systems, who does engineering for multiple automobile manufacturers, and i wonder if mazda has some same system in their automobile's as toyota and if it was engineered by the same supplier. i would swear on a bible that this happened to me with my car. (my husband left grob to move to cleveland and marry me). it sucks having this car now, it is paid off, i'm afraid to drive it, and i don't want to sell to an innocent stranger. *tr.Mileage was 71000 miles. Vehicle Identification Number (VIN):1YVFP80CX35. Mazda Mazda6 2003 problem was reported in PAINESVILLE, OH. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 35 mph.

Mazda Mazda6 2003 Fuel System, Other

Mazda Mazda6 2003 Fuel System, Other Review #10308054

MAZDA MAZDA6 2003 car safety problem was reported on Aug 05, 2009.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with FUEL SYSTEM, OTHER . while driving home from my chardon, oh office on either aug 5 or 6, 2009 at 35 mph my car's rpm needle started jumping and the car's "gas pressure" felt like it was hicupping. the rpm needle jumped from @2 to 4 twice, then the car started steadily accelerating in speed. the brake pedal at this time felt "hard" and the car was "fighting against my attempt to slow down" and the rpm's were still trying to accelerate. i imagine if i pushed on the brake and the gas pedal at the same time, it would simulate the way it felt. i also have a manual shift mode on my car and used it to more effectively slow down (vs using the brake) but at the same time the car was still trying to accelerate, but couldn't because i was in a lower gear/manual mode. and i remember while in manual gear 1, my car was lurching me back and forth in my seat as i drove through my neighborhood to get home, and my foot was off the gas pedal! on aug 12th, 2009 i mentioned this event to a mitsubishi dealer's mechanic (friend of my father) who was replacing my power steering line, he took a look at my car but said it seemed fine. my husband has been driving that car since that event, because i am afraid of it happening again. the car has not done this while my husband has been driving it. not to sound like an oddball, but if i didn't know better i would have said my car was acting possessed, like the movie "christine". i have to think that there is some correlation to what my car did and what is going on with toyota. my husband is an electrical engineer and he used to work for grob systems, who does engineering for multiple automobile manufacturers, and i wonder if mazda has some same system in their automobile's as toyota and if it was engineered by the same supplier. i would swear on a bible that this happened to me with my car. (my husband left grob to move to cleveland and marry me). it sucks having this car now, it is paid off, i'm afraid to drive it, and i don't want to sell to an innocent stranger. *tr.Mileage was 71000 miles. Vehicle Identification Number (VIN):1YVFP80CX35. Mazda Mazda6 2003 problem was reported in PAINESVILLE, OH. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 35 mph.

Mazda Mazda6 2003 Engine And Engine Cooling Engine

Mazda Mazda6 2003 Engine And Engine Cooling Engine Review #10324019

MAZDA MAZDA6 2003 car safety problem was reported on Apr 04, 2010.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING:ENGINE . over a period of 1-1/2 hours, our 2003 mazda 6 quickly lost all acceleration power on 5 different occasions while driving out of town on the highway. following a 'slight bump' the car went from 70 mph to 35 mph to 10 mph, quickly, regardless of pressure applied to the accelerator. getting to the side of the road in traffic going 70mph+ was in itself a challenge and after pulling to a complete stop the car began jerking fiercely. only turning off the engine completely was the system 'reset'. the mazda dealership hooked it up and determined the throttle body must be replaced for a quoted cost of $534.41 (macon, ga). the sensor itself, the likely culprit for this issue, is not offered or available for sale by mazda without its 'body', unlike countless other makes, which is outrageous, but the most disgusting part of this issue is that although there are a critical number of complaints logged about this issue, the tps has not been listed as a recall. the dealership stated they did not have to replace it since there were only 'service bulletins' listed and no actual recalls for the parts. they are very aware of the situation. from my own experience and my daughter's with this issue, i can guarantee that this has definitely caused serious injuries, if not fatalities, that just haven't been reported or possibly identified. i will continue to hunt down the sensor as i will not fall prey to mazda's 'racket'. the car will sit until i locate the part, or end up being parted out. *tr.Vehicle Identification Number (VIN):1YVHP80DX35. Mazda Mazda6 2003 problem was reported in WARNER ROBINS, GA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 60 mph.

Mazda Mazda6 2003 Vehicle Speed Control

Mazda Mazda6 2003 Vehicle Speed Control Review #10324019

MAZDA MAZDA6 2003 car safety problem was reported on Apr 04, 2010.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with VEHICLE SPEED CONTROL . over a period of 1-1/2 hours, our 2003 mazda 6 quickly lost all acceleration power on 5 different occasions while driving out of town on the highway. following a 'slight bump' the car went from 70 mph to 35 mph to 10 mph, quickly, regardless of pressure applied to the accelerator. getting to the side of the road in traffic going 70mph+ was in itself a challenge and after pulling to a complete stop the car began jerking fiercely. only turning off the engine completely was the system 'reset'. the mazda dealership hooked it up and determined the throttle body must be replaced for a quoted cost of $534.41 (macon, ga). the sensor itself, the likely culprit for this issue, is not offered or available for sale by mazda without its 'body', unlike countless other makes, which is outrageous, but the most disgusting part of this issue is that although there are a critical number of complaints logged about this issue, the tps has not been listed as a recall. the dealership stated they did not have to replace it since there were only 'service bulletins' listed and no actual recalls for the parts. they are very aware of the situation. from my own experience and my daughter's with this issue, i can guarantee that this has definitely caused serious injuries, if not fatalities, that just haven't been reported or possibly identified. i will continue to hunt down the sensor as i will not fall prey to mazda's 'racket'. the car will sit until i locate the part, or end up being parted out. *tr.Vehicle Identification Number (VIN):1YVHP80DX35. Mazda Mazda6 2003 problem was reported in WARNER ROBINS, GA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 60 mph.

Mazda Mazda6 2003 Power Train Automatic Transmission

Mazda Mazda6 2003 Power Train Automatic Transmission Review #10332257

MAZDA MAZDA6 2003 car safety problem was reported on May 03, 2010.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . the transmission is slipping, not wanting to shift into 2nd gear and then when it does shift it jerks the car really hard. this used to occur very seldom but since the car now has 98,000 miles on it, this has been happening almost all the time. i have heard that the car needs to be reflashed, but i have also read that this does not help. many people with the same car have the same exact problem. also this transmission is not able to be rebuilt. the transmission needs to be recalled. *tr.Mileage was 98000 miles. Vehicle Identification Number (VIN):1YVHP80D735. Mazda Mazda6 2003 problem was reported in STEVINSON, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 20 mph.

Mazda Mazda6 2003 Power Train Manual Transmission

Mazda Mazda6 2003 Power Train Manual Transmission Review #10333870

MAZDA MAZDA6 2003 car safety problem was reported on May 30, 2010.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:MANUAL TRANSMISSION . went to store pushed in clutch went to the floor parked the car and when i came out i could not start the car. the safety thing would not engage to allow me . had the car towed to a mechanic he told me it was the clutch assembly, the car has been back three times in two years because it's tough to shift clutch real spongy. today it went to the floor again and stalled, can't start the car in the middle of an intersection had to have it pushed out of the way then towed home. the motor was replaced at 32k. the first time the whole clutch was replaced at 40k and it,s never been right since. *tr.Mileage was 114457 miles. Vehicle Identification Number (VIN):1YVHP80CX35. Mazda Mazda6 2003 problem was reported in CHICOPEE, MA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 10 mph.

Mazda Mazda6 2003 Service Brakes, Hydraulic Foundation Components Hoses, Lines/piping, And Fittings

Mazda Mazda6 2003 Service Brakes, Hydraulic Foundation Components Hoses, Lines/piping, And Fittings Review #10342921

MAZDA MAZDA6 2003 car safety problem was reported on July 08, 2010.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS . tl* the contact owns a 2003 mazda 6. the contact took the vehicle for an oil change when the mechanic informed him that the brake lines were bending and pushing into the axle boots. the mechanic replaced the axle and brake lines at the contacts expense. the dealer was contacted but no assistance was provided. the failure mileage was 50,000 and the current mileage is 51,000. updated 10/05/10 *bf updated 10/07/10 .Mileage was 50000 miles. Vehicle Identification Number (VIN):1YVHP80D735. Mazda Mazda6 2003 problem was reported in WACKO, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph. DEALER'S NAME: CITY TIRE & BATTERY . DEALER'S TELEPHONE NUMBER: 752-8351 . DEALER'S CITY: WACO . DEALER'S STATE CODE: TX. DEALER'S ZIPCODE: 76711 .

Mazda Mazda6 2003 Power Train Clutch Assembly Pedal/linkage

Mazda Mazda6 2003 Power Train Clutch Assembly Pedal/linkage Review #10348913

MAZDA MAZDA6 2003 car safety problem was reported on June 01, 2010.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:CLUTCH ASSEMBLY:PEDAL/LINKAGE . clutch pedal assembly cracks causing it to be difficult to shift gears, clutch will stick and not spring back. eventually the car is unusable due to the clutch. i did research to see there are many complaints on this problem concerning mazda3, mazda6 and the rx8. i had to buy a new clutch pedal assembly but seems the problem is happening again. mazda needs to make a stronger bracket to reinforce the pedal assembly. *tr.Mileage was 87000 miles. Vehicle Identification Number (VIN):1YVFP80C335. Mazda Mazda6 2003 problem was reported in VAN NUYS, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 35 mph.

Mazda Mazda6 2003 Air Bags

Mazda Mazda6 2003 Air Bags Review #10360980

MAZDA MAZDA6 2003 car safety problem was reported on Sept 30, 2010.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with AIR BAGS . after being run off the highway by a suv the air bags failed to deploy during a head on collision into the woods going 65mph down a 50ft embankment. whole front end of the car, and the drive side of the car was destroyed, causing the engine to come up resulting in the steering wheel and console to come up. *tr.Vehicle was involved in a crash. Mileage was 110000 miles. Mazda Mazda6 2003 problem was reported in VIRGINIA BEACH, VA. Accident was reported to Police. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 65 mph.

Mazda Mazda6 2003 Structure Body

Mazda Mazda6 2003 Structure Body Review #10362537

MAZDA MAZDA6 2003 car safety problem was reported on Mar 01, 2010.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with STRUCTURE:BODY . we have owned our mazda 6 since 2003. this year there is substantial rust in both rear fenders. researching this it appears to be a common problem, such a problem that it was a recall in england. we contacted mazda to see if a recall was available to america, but one was not. mazda is aware of the problem as they modified their design to change the rear fender on future models. we fear that the structure has degraded greatly that a side impact would result in serious injury to rear passengers. *tr.Mileage was 85000 miles. Mazda Mazda6 2003 problem was reported in PLAINFIELD, IL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2003 Engine And Engine Cooling

Mazda Mazda6 2003 Engine And Engine Cooling Review #10367164

MAZDA MAZDA6 2003 car safety problem was reported on Nov 12, 2010.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING . 2003 mazda 6 with regular maintenance and approximately 60k miles. having incidents of stalling and idling hard. per one mechanic it is a pvc and lines. a second mechanic showed us a crack in the intake manifold. these parts are cheap since they are plastic. but the quoted installation is over $700 for just the pvc. *tr.Mileage was 62000 miles. Mazda Mazda6 2003 problem was reported in VIRGINIA BEACH, VA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 35 mph.

Mazda Mazda6 2003 Engine And Engine Cooling Review #10383310

MAZDA MAZDA6 2003 car safety problem was reported on Feb 17, 2011.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING . on 17 feb 2011 i was driving my 2003 mazda 6s and while driving at a low speed of 25 mph all my lights on my dashboard turned on and my car immediately began to reduce speed almost to a stand still. luckily i was able to pull to the side of the road in time to avoid any accidents or possible damage to my vehicle. i restarted my car and was able to proceed in driving. however my engine light remained on. i researched this issue online and found that someone with the same model vehicle and year had the same issue almost verbatim. the referenced a service bulletin from mazda bulletin no: 01-016/06 released in 2006 regarding throttle body replacement. i read the bulletin and sure enough it stated to inspect the letters on the throttle body. it showed aa,ab,ba markings = no good and bb marking = good. so i inspected my vehicles throttle body letter and sure enough it was "aa". i will have to definitely replace it, and of course i have no choice because you can imagine the ramifications of driving on a highway or freeway and something like this were to occur. accidents, or even death. it is pretty upsetting that something has not been done to correct these issues especially with the potential consequences of this defect! *tr.Mileage was 102290 miles. Vehicle Identification Number (VIN):1YVHP80D835. Mazda Mazda6 2003 problem was reported in TRAVIS AFB, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. VEHICLE SPEED: 25 mph.

Mazda Mazda6 2003 Power Train

Mazda Mazda6 2003 Power Train Review #10383310

MAZDA MAZDA6 2003 car safety problem was reported on Feb 17, 2011.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN . on 17 feb 2011 i was driving my 2003 mazda 6s and while driving at a low speed of 25 mph all my lights on my dashboard turned on and my car immediately began to reduce speed almost to a stand still. luckily i was able to pull to the side of the road in time to avoid any accidents or possible damage to my vehicle. i restarted my car and was able to proceed in driving. however my engine light remained on. i researched this issue online and found that someone with the same model vehicle and year had the same issue almost verbatim. the referenced a service bulletin from mazda bulletin no: 01-016/06 released in 2006 regarding throttle body replacement. i read the bulletin and sure enough it stated to inspect the letters on the throttle body. it showed aa,ab,ba markings = no good and bb marking = good. so i inspected my vehicles throttle body letter and sure enough it was "aa". i will have to definitely replace it, and of course i have no choice because you can imagine the ramifications of driving on a highway or freeway and something like this were to occur. accidents, or even death. it is pretty upsetting that something has not been done to correct these issues especially with the potential consequences of this defect! *tr.Mileage was 102290 miles. Vehicle Identification Number (VIN):1YVHP80D835. Mazda Mazda6 2003 problem was reported in TRAVIS AFB, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. VEHICLE SPEED: 25 mph.

Mazda Mazda6 2003 Fuel System, Gasoline

Mazda Mazda6 2003 Fuel System, Gasoline Review #10384337

MAZDA MAZDA6 2003 car safety problem was reported on Nov 22, 2010.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with FUEL SYSTEM, GASOLINE . car engine stopping while running and a no start. service engine light warnings over a long time. one repair by mazda on the gas cap repair, but i have also uncovered a recall on leaking seals at the tank on 2003 models, 03v-531. service light again came on from 10/18/10 -10/30/10. while out of town the car sat airport parking on my return it stopped without warning at a light 11/22/10, but all lights and radio stations were active, so no battery problem. after adjusting the filler gas cap several times i found it wasn't closing and could be pulled right off. we have made sure the cap is on tightly each time and since cancelled the dealer appointment for a $100 inspection, no light since. 2/9/11 after driving 35 miles the car would not restart, aaa came out and no battery trouble, but a 30 mile towing was required to my home. the vehicle sits in a garage avg temp of 35-45f. the next morning after several attempts and using both keys it restarted and we took it into a dealer. @2 days later they find a "service bulletin" 901-009/07) from 2007. possible @ -30c (zerof) the no start or crank due to moisture within the main relay and/or fuel pump relay. that night 25-30f in nov no way close. on 02/12/11 while driving on is77 the car quite running again, 911 called as i made it to the side of the road under heavy fast moving traffic. this week on 2/22 while in the garage hesitant to turn over again but did start on the 3rd try, vehicle temp reading was 47f. so now for 2 new parts for 2003-2005 models and $450+ repairs can be made. the parts are in and per the bulletin looks more like a by-pass option than replacing a defective oem part. cutting out while driving is very serious, as much so as acceleration on a toyota. since my company is tied to the tire/wheel & auto mfg and we conduct 1/2 dot tire test for the usa, i'm pretty sure i know what i'm talking about on defects. *tr.Mileage was 112000 miles. Vehicle Identification Number (VIN):1YVFP80C135. Mazda Mazda6 2003 problem was reported in UNIONTOWN, OH. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. VEHICLE SPEED: 65 mph.

Mazda Mazda6 2003 Fuel System, Gasoline Review #10394944

MAZDA MAZDA6 2003 car safety problem was reported on Aug 01, 2010.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with FUEL SYSTEM, GASOLINE . on several models of mazda 6's mazda has issued a tsb for the problem which is a defective throttle position sensor. i have read thousands of complaints by consumers. mazda has made a new part yet not recalled the old part. when this part fails you lose all acceleration power to the vehicle. the way to reset this is to turn off the motor and turn it right back on. i was driving on a two-lane highway crossed over the broken double yellow line to pass another vehicle when this defective part failed and i lost all acceleration. thankfully, i had just enough time to be able to allow the same car i was passing to pass me and i pulled off the roadway. the car worked fine for the rest of that trip it occurred again on the freeway in the fast lane. i contacted mazda corporate customer care they advised me that they were aware of the issue but had not issued a recall at this time. .Mileage was 82000 miles. Vehicle Identification Number (VIN):1YVHP80D735. Mazda Mazda6 2003 problem was reported in CLOVIS, CA. Vehicle was not using Cruise Control. VEHICLE SPEED: 65 mph.

Mazda Mazda6 2003 Electrical System

Mazda Mazda6 2003 Electrical System Review #10394944

MAZDA MAZDA6 2003 car safety problem was reported on Aug 01, 2010.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ELECTRICAL SYSTEM . on several models of mazda 6's mazda has issued a tsb for the problem which is a defective throttle position sensor. i have read thousands of complaints by consumers. mazda has made a new part yet not recalled the old part. when this part fails you lose all acceleration power to the vehicle. the way to reset this is to turn off the motor and turn it right back on. i was driving on a two-lane highway crossed over the broken double yellow line to pass another vehicle when this defective part failed and i lost all acceleration. thankfully, i had just enough time to be able to allow the same car i was passing to pass me and i pulled off the roadway. the car worked fine for the rest of that trip it occurred again on the freeway in the fast lane. i contacted mazda corporate customer care they advised me that they were aware of the issue but had not issued a recall at this time. .Mileage was 82000 miles. Vehicle Identification Number (VIN):1YVHP80D735. Mazda Mazda6 2003 problem was reported in CLOVIS, CA. Vehicle was not using Cruise Control. VEHICLE SPEED: 65 mph.

Mazda Mazda6 2003 Engine And Engine Cooling

Mazda Mazda6 2003 Engine And Engine Cooling Review #10394944

MAZDA MAZDA6 2003 car safety problem was reported on Aug 01, 2010.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING . on several models of mazda 6's mazda has issued a tsb for the problem which is a defective throttle position sensor. i have read thousands of complaints by consumers. mazda has made a new part yet not recalled the old part. when this part fails you lose all acceleration power to the vehicle. the way to reset this is to turn off the motor and turn it right back on. i was driving on a two-lane highway crossed over the broken double yellow line to pass another vehicle when this defective part failed and i lost all acceleration. thankfully, i had just enough time to be able to allow the same car i was passing to pass me and i pulled off the roadway. the car worked fine for the rest of that trip it occurred again on the freeway in the fast lane. i contacted mazda corporate customer care they advised me that they were aware of the issue but had not issued a recall at this time. .Mileage was 82000 miles. Vehicle Identification Number (VIN):1YVHP80D735. Mazda Mazda6 2003 problem was reported in CLOVIS, CA. Vehicle was not using Cruise Control. VEHICLE SPEED: 65 mph.

Mazda Mazda6 2003 Power Train Automatic Transmission

Mazda Mazda6 2003 Power Train Automatic Transmission Review #10404535

MAZDA MAZDA6 2003 car safety problem was reported on June 05, 2011.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . 2003 mazda6 6.0 atx - car suddenly loses power while accelerating. the engine revs but no power to wheels. i have contacted local dealer without any resolution to why this is occurring. upon a brief internet search i find this is not an isolated case. i have noticed it happens more often with ac unit on. *tr.Mileage was 125000 miles. Vehicle Identification Number (VIN):1YVFP80D635. Mazda Mazda6 2003 problem was reported in MAGNA, UT. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Mazda Mazda6 2003 drive type:FWD. VEHICLE SPEED: 50 mph.

Mazda Mazda6 2003 Vehicle Speed Control

Mazda Mazda6 2003 Vehicle Speed Control Review #10416210

MAZDA MAZDA6 2003 car safety problem was reported on July 11, 2010.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with VEHICLE SPEED CONTROL . traveling at freeway speeds in ca on the san francisco bay bridge during evening traffic, my 2003 mazda6 suddenly went into "safe or limp" mode. this caused abrupt loss of power with no ability to accelerate, which almost caused a multi vehicle accident. when taken to a mechanic, the root cause was a code dtc p2135 for a defective throttle body. mazda admits 3 (three) versions of their throttle body for that vehicle defective with automatic discard if there is a mil with dtc p2135(per technical service bulletin no. 01-016/06 issued 05/18/2006 by mazda north american operations), and throttle body markings "aa","ab","ba". mine is an "aa". obviously mazda admits that these are defective, but only replaced them under warranty and my vehicle is not under warranty any longer. they call the new part an "upgraded version". my vehicle has done this (safe mode) several times, so now it is parked until i can get it fixed (quoted price for repair is $714 from mazda dealer). these incidents creates an extremely dangerous situation and i feel very lucky that i was not involved in an accident when this happened to me, and luckily no one was injured, it could have been a very dangerous situation. i feel mazda has made a technical service bulletin admitting that this part is defective and it can cause danger and possibly loss of life. mazda needs to be forced to make a recall and replace these parts at no cost to the consumer. defective part - throttle body with markings "aa", "ab", "ba" mine is "aa".Mileage was 98000 miles. Vehicle Identification Number (VIN):1YVFP80D635. Mazda Mazda6 2003 problem was reported in MEDFORD, OR. Vehicle was not using Cruise Control. VEHICLE SPEED: 55 mph.

Mazda Mazda6 2003 Engine And Engine Cooling

Mazda Mazda6 2003 Engine And Engine Cooling Review #10416210

MAZDA MAZDA6 2003 car safety problem was reported on July 11, 2010.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING . traveling at freeway speeds in ca on the san francisco bay bridge during evening traffic, my 2003 mazda6 suddenly went into "safe or limp" mode. this caused abrupt loss of power with no ability to accelerate, which almost caused a multi vehicle accident. when taken to a mechanic, the root cause was a code dtc p2135 for a defective throttle body. mazda admits 3 (three) versions of their throttle body for that vehicle defective with automatic discard if there is a mil with dtc p2135(per technical service bulletin no. 01-016/06 issued 05/18/2006 by mazda north american operations), and throttle body markings "aa","ab","ba". mine is an "aa". obviously mazda admits that these are defective, but only replaced them under warranty and my vehicle is not under warranty any longer. they call the new part an "upgraded version". my vehicle has done this (safe mode) several times, so now it is parked until i can get it fixed (quoted price for repair is $714 from mazda dealer). these incidents creates an extremely dangerous situation and i feel very lucky that i was not involved in an accident when this happened to me, and luckily no one was injured, it could have been a very dangerous situation. i feel mazda has made a technical service bulletin admitting that this part is defective and it can cause danger and possibly loss of life. mazda needs to be forced to make a recall and replace these parts at no cost to the consumer. defective part - throttle body with markings "aa", "ab", "ba" mine is "aa".Mileage was 98000 miles. Vehicle Identification Number (VIN):1YVFP80D635. Mazda Mazda6 2003 problem was reported in MEDFORD, OR. Vehicle was not using Cruise Control. VEHICLE SPEED: 55 mph.

Mazda Mazda6 2003 Vehicle Speed Control

Mazda Mazda6 2003 Vehicle Speed Control Review #10424199

MAZDA MAZDA6 2003 car safety problem was reported on Sept 04, 2011.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with VEHICLE SPEED CONTROL . car experienced unintended acceleration in stop-and-go traffic (0-30 mph) on 9/4/11 and 9/7/11. tachometer needle was bouncing between 1 and 3. car accelerated, and rpms increased, while on a level surface, without the gas pedal applied. car fought against my efforts to slow down by breaking. car stabilized upon reaching 40 mph. on 9/7/11, the mazda dealership attempted to correct the problem by cleaning the throttle body, but the intervention failed to correct the problem and it recurred on 9/7. this is a serious complaint with a high risk of injuries or death. mazda owner internet message boards describe this problem repeatedly. please investigate and mandate that mazda identify an immediate correction to this dangerous problem. *tr.Mileage was 70200 miles. Vehicle Identification Number (VIN):1YVFP80C035. Mazda Mazda6 2003 problem was reported in DOUGLASTON, NY. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 20 mph.

Mazda Mazda6 2003 Vehicle Speed Control Review #10426958

MAZDA MAZDA6 2003 car safety problem was reported on Aug 01, 2011.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with VEHICLE SPEED CONTROL . the vehicle acceleration cuts off and the dash board lights are all on. you will have to shut off the car and turn it back on before it will work correctly. dealer said their diagnostic did not show any throttle sensor errors but my scan tool did. *tr.Mileage was 125000 miles. Vehicle Identification Number (VIN):1YVFP80DX35. Mazda Mazda6 2003 problem was reported in EDWARDSVILLE, KS. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 70 mph.

Mazda Mazda6 2003 Power Train Manual Transmission

Mazda Mazda6 2003 Power Train Manual Transmission Review #10429294

MAZDA MAZDA6 2003 car safety problem was reported on Oct 09, 2011.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:MANUAL TRANSMISSION . traveling at speeds of 30-60 mph during any type of traffic (stop and go, freeway speeds, etc), my 2003 mazda6 will suddenly go into a "safe or limp" mode characterized by abrupt loss of power with no ability to accelerate. the rpms drop to between 1000 and 1300 and fluctuate quickly between the two numbers. i have had to quickly press the clutch, turn the car off and back on to regain normal function. when taken to a mechanic, the root cause was determined to be a defective throttle body. upon more research (including this site), this does not appear to be an uncommon issue for this model of mazda. *kb.Mileage was 148000 miles. Mazda Mazda6 2003 problem was reported in ST. PAUL, MN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 60 mph.

Mazda Mazda6 2003 Vehicle Speed Control

Mazda Mazda6 2003 Vehicle Speed Control Review #10429294

MAZDA MAZDA6 2003 car safety problem was reported on Oct 09, 2011.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with VEHICLE SPEED CONTROL . traveling at speeds of 30-60 mph during any type of traffic (stop and go, freeway speeds, etc), my 2003 mazda6 will suddenly go into a "safe or limp" mode characterized by abrupt loss of power with no ability to accelerate. the rpms drop to between 1000 and 1300 and fluctuate quickly between the two numbers. i have had to quickly press the clutch, turn the car off and back on to regain normal function. when taken to a mechanic, the root cause was determined to be a defective throttle body. upon more research (including this site), this does not appear to be an uncommon issue for this model of mazda. *kb.Mileage was 148000 miles. Mazda Mazda6 2003 problem was reported in ST. PAUL, MN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 60 mph.

Mazda Mazda6 2003 Engine And Engine Cooling

Mazda Mazda6 2003 Engine And Engine Cooling Review #10429294

MAZDA MAZDA6 2003 car safety problem was reported on Oct 09, 2011.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING . traveling at speeds of 30-60 mph during any type of traffic (stop and go, freeway speeds, etc), my 2003 mazda6 will suddenly go into a "safe or limp" mode characterized by abrupt loss of power with no ability to accelerate. the rpms drop to between 1000 and 1300 and fluctuate quickly between the two numbers. i have had to quickly press the clutch, turn the car off and back on to regain normal function. when taken to a mechanic, the root cause was determined to be a defective throttle body. upon more research (including this site), this does not appear to be an uncommon issue for this model of mazda. *kb.Mileage was 148000 miles. Mazda Mazda6 2003 problem was reported in ST. PAUL, MN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 60 mph.

Mazda Mazda6 2003 Seats

Mazda Mazda6 2003 Seats Review #10494816

MAZDA MAZDA6 2003 car safety problem was reported on Jan 19, 2013.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with SEATS . i was driving home from work. it was cold, and as i usually do, turned on the heated seat. about 20 minutes into my drive, i noticed that my back was heating up more than usual. my back then started to burn, so i immediately turned the heated seat off. then i noticed a smell of burned plastic. after i arrived home, i got out of my car and noticed that there was a burn hole through my leather seat. i took off my jacket and noticed that it had also burned a hole through it as well. i contacted my dealer and took it in on january 21. they told me that because the warranty wasn't any good, there was nothing they could do. any repairs would be at my expense. i told them that they replaced my heated seat in january of '09 because it had stopped working and they charged me around $500. four years later, it malfunctioned and they don't want to take any blame. i told the dealer it was a safety issue, not a warranty issue. i've emailed mazda's website but no one is responding. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 87790 miles. Vehicle Identification Number (VIN):1YVHP80D035. Mazda Mazda6 2003 problem was reported in WASHINGTON, DC. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 35 mph.

Mazda Mazda6 2003 Structure Body

Mazda Mazda6 2003 Structure Body Review #10496468

MAZDA MAZDA6 2003 car safety problem was reported on Feb 03, 2013.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with STRUCTURE:BODY . tl* the contact owns a 2003 mazda mazda6. the contact stated that the front driver's side door would not open. the vehicle was taken to a dealer for diagnosis but the vehicle was not inspected and the contact was informed that the failure was a common problem. the manufacturer was not notified of the failure. the vehicle was not repaired. the failure and current mileage was 110,000. updated 4/1/13 *cn the consumer stated the spring for the door lock acutuator would fail, trapping occupants in the vehicle. updated 04/19/2013 *js.0 person(s) were injured. 0 person(s) died.Mileage was 110000 miles. Vehicle Identification Number (VIN):1YVFP80C835. Mazda Mazda6 2003 problem was reported in CONCORD, CA. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. FUEL TYPE: GAS. Mazda Mazda6 2003 TRANSMISSION TYPE: AUTO. DEALER'S NAME: PRIVATE PARTY .

Mazda Mazda6 2003 Power Train

Mazda Mazda6 2003 Power Train Review #10519771

MAZDA MAZDA6 2003 car safety problem was reported on June 30, 2004.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN . i hadn't had the car too long and was taking off from a traffic light when the hard shift first occurred. i really thought i'd been hit from behind by another car, but this was not the case. it didn't happen too often for awhile, then it started happening more frequently so i took it in. i took it to multiple mazda dealers, where i would leave it overnight for them to try and reproduce the problem. they always insisted that they could not so i gave up for awhile. it got worse and then i saw a tsb online about the issue. the supposed fix is to flash the computer chip. every dealer i contacted about it said they'd charge an hour labor to do this, and my private mechanic couldn't do it as it's some magical thing only the dealers can do. anyway i have not had it flashed yet, the car is coming up on 147k and the problem is now so bad that it's dangerous. i will have the flash done in the next couple days but i don't think it will help. i also had to have the throttle body replaced a year ago as i was nearly hit by a big rig when the car shut down in the fast lane. so many people have had this and similar really dangerous problems, this car should have been recalled years ago. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 16000 miles. Mazda Mazda6 2003 problem was reported in SCOTTS VALLEY, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 20 mph.

Mazda Mazda6 2003 Engine

Mazda Mazda6 2003 Engine Review #10524537

MAZDA MAZDA6 2003 car safety problem was reported on June 09, 2013.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ENGINE . tl* the contact owns a 2003 mazda mazda6. the contact stated that while driving approximately 50 mph, the vehicle stalled without warning. the contact stated that blue smoke was emitting from the tail pipe as the check engine light illuminated. the vehicle was taken to an independent mechanic for diagnosis. the mechanic stated that the catalytic converters were clogged and would have to be replaced. additionally, the mechanic stated that the front passenger's side tie rod was loose and could fracture. the vehicle was not repaired. the vin was not available. the approximate failure mileage was 122,000. *tr.Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Mileage was 122000 miles. Mazda Mazda6 2003 problem was reported in GALLOWAY, NJ. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 50 mph.

Mazda Mazda6 2003 Steering

Mazda Mazda6 2003 Steering Review #10524537

MAZDA MAZDA6 2003 car safety problem was reported on June 09, 2013.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with STEERING . tl* the contact owns a 2003 mazda mazda6. the contact stated that while driving approximately 50 mph, the vehicle stalled without warning. the contact stated that blue smoke was emitting from the tail pipe as the check engine light illuminated. the vehicle was taken to an independent mechanic for diagnosis. the mechanic stated that the catalytic converters were clogged and would have to be replaced. additionally, the mechanic stated that the front passenger's side tie rod was loose and could fracture. the vehicle was not repaired. the vin was not available. the approximate failure mileage was 122,000. *tr.Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Mileage was 122000 miles. Mazda Mazda6 2003 problem was reported in GALLOWAY, NJ. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 50 mph.

Mazda Mazda6 2003 Power Train

Mazda Mazda6 2003 Power Train Review #10546259

MAZDA MAZDA6 2003 car safety problem was reported on Aug 24, 2013.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN . i purchased a 2003 mazda 6 about a month ago, and i have had the hard shifting problems and the temp gauge going up to high all the time and floating back down. i was not informed of this and other recalls of this model and i have been denied to get the problem fixed. the dealer where i bought it said they flashed it a couple times but it is not stated o n my repair receipt. i feel that i am driving a dangerous car and something needs to be done!!!! i am not going to keep driving this car and i feel i can take it back because my first payment is not due yet. be it said that this car has been in the shop 4 times since day one! they still will not fix it and it is under warranty. this is a rip off and this model is unsafe and these models should be taken off of the market!!! *tr.0 person(s) were injured. 0 person(s) died.Mileage was 96332 miles. Vehicle Identification Number (VIN):IYVFP80D335. Mazda Mazda6 2003 problem was reported in LAKELAND, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2003 Engine

Mazda Mazda6 2003 Engine Review #10546259

MAZDA MAZDA6 2003 car safety problem was reported on Aug 24, 2013.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ENGINE . i purchased a 2003 mazda 6 about a month ago, and i have had the hard shifting problems and the temp gauge going up to high all the time and floating back down. i was not informed of this and other recalls of this model and i have been denied to get the problem fixed. the dealer where i bought it said they flashed it a couple times but it is not stated o n my repair receipt. i feel that i am driving a dangerous car and something needs to be done!!!! i am not going to keep driving this car and i feel i can take it back because my first payment is not due yet. be it said that this car has been in the shop 4 times since day one! they still will not fix it and it is under warranty. this is a rip off and this model is unsafe and these models should be taken off of the market!!! *tr.0 person(s) were injured. 0 person(s) died.Mileage was 96332 miles. Vehicle Identification Number (VIN):IYVFP80D335. Mazda Mazda6 2003 problem was reported in LAKELAND, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2003 Vehicle Speed Control

Mazda Mazda6 2003 Vehicle Speed Control Review #10552526

MAZDA MAZDA6 2003 car safety problem was reported on Aug 15, 2012.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with VEHICLE SPEED CONTROL . i was driving on the interstate in ga going a little over 70mph in the fast lane and all of a sudden it kicked in to limp mode to about 10mph. i almost had a semi rear end me but was lucky enough to get out of the way just in time. i could turn the car off and it would reset it for awhile and then do it again. then it finally got to the point it was doing it way too much. it turned out to be the throttle body. i learned that they know about it but wont recall it. its been sitting for a year because they want $900.00 to fix it. i feel like i should drive it and let somebody hit me just to make it a recall so all the 1000s if not 10 of thousands of people who have the same problem will be able to get it fixed. clearly that is a huge safety issue and should be a recall. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 110000 miles. Mazda Mazda6 2003 problem was reported in MAYSVILLE, KY. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 70 mph.

Mazda Mazda6 2003 Engine

Mazda Mazda6 2003 Engine Review #10557598

MAZDA MAZDA6 2003 car safety problem was reported on July 27, 2012.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with ENGINE . while driving home the car seemed to have lost all power, but was still running. i was able to coast to my house but then tried to stop and the car surged. i had to pull the emergency brake to stop. i was quite shaken at that point. the engine light came on. i was able to drive it back to town to have the car checked, no error codes showed up on the computer. the engine light did go off, the car ran fine for about 3 months then proceeded to do the same thing. the car lost power but i was able to coast to my place of work. however even though there seemed to be no power again when i tried to brake the car surged and the car almost jumped the curb, which would have put me in my office. i again had the vehicle checked, no errors. after researching it seems this may be due to the automatic throttle sensor. question with all the complaints, cars stalling at high speeds and the surging of vehicles why is there no recall. you recall for a stupid lights, over spraying of a clear coat, but no recall on something that is putting people in danger?? i don't understand. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 155000 miles. Mazda Mazda6 2003 problem was reported in FRENCHTOWN, MT. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 60 mph.

Mazda Mazda6 2003 Vehicle Speed Control

Mazda Mazda6 2003 Vehicle Speed Control Review #10557598

MAZDA MAZDA6 2003 car safety problem was reported on July 27, 2012.MAZDA MAZDA6 2003, manufactured by MAZDA MOTOR CORP had a problem with VEHICLE SPEED CONTROL . while driving home the car seemed to have lost all power, but was still running. i was able to coast to my house but then tried to stop and the car surged. i had to pull the emergency brake to stop. i was quite shaken at that point. the engine light came on. i was able to drive it back to town to have the car checked, no error codes showed up on the computer. the engine light did go off, the car ran fine for about 3 months then proceeded to do the same thing. the car lost power but i was able to coast to my place of work. however even though there seemed to be no power again when i tried to brake the car surged and the car almost jumped the curb, which would have put me in my office. i again had the vehicle checked, no errors. after researching it seems this may be due to the automatic throttle sensor. question with all the complaints, cars stalling at high speeds and the surging of vehicles why is there no recall. you recall for a stupid lights, over spraying of a clear coat, but no recall on something that is putting people in danger?? i don't understand. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 155000 miles. Mazda Mazda6 2003 problem was reported in FRENCHTOWN, MT. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 60 mph.

Mazda Mazda6 2003 Engine

Mazda Mazda6 2003 Engine Review #10587693

MAZDA MAZDA6 2003 car safety problem was reported on May 02, 2014.MAZDA MAZDA6 2003, manufactured by Mazda Motor Corp. had a problem with ENGINE . was at a stop sign to make a left turn half way thru the car stalled and all lights came on, vehicle behind me almost ran into us. barely got pulled over to the side of the road had to turn car off and then back on the check engine light remained on but vehicle would drive, after about 5 starts the light came off had the car checked, was told it was the throttle body. one week later same thing wet to pull onto a busy street and car stalled almost causing another wreck, tried to drive it home and stopped at the grocery store, when i went to pull in the car stalled again in the middle of the street, blocking on coming traffic. called mazda to see how much it would cost to be fixed, the lady told me that if it was still under warranty it would be free but that expired in 2011. i have seen many of the same complaints about this, mazda has admitted to it being a problem but has not recalled it. we have two kids and thank god nothing serious has happened with us in the car. this problem could very easily cause injury or deaths to any drivers on the road. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 107000 miles. Vehicle Identification Number (VIN):1YVFP80C835. Mazda Mazda6 2003 problem was reported in PORTLAND, OR. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 10 mph.

Mazda Mazda6 2003 Fuel System, Gasoline

Mazda Mazda6 2003 Fuel System, Gasoline Review #10587693

MAZDA MAZDA6 2003 car safety problem was reported on May 02, 2014.MAZDA MAZDA6 2003, manufactured by Mazda Motor Corp. had a problem with FUEL SYSTEM, GASOLINE . was at a stop sign to make a left turn half way thru the car stalled and all lights came on, vehicle behind me almost ran into us. barely got pulled over to the side of the road had to turn car off and then back on the check engine light remained on but vehicle would drive, after about 5 starts the light came off had the car checked, was told it was the throttle body. one week later same thing wet to pull onto a busy street and car stalled almost causing another wreck, tried to drive it home and stopped at the grocery store, when i went to pull in the car stalled again in the middle of the street, blocking on coming traffic. called mazda to see how much it would cost to be fixed, the lady told me that if it was still under warranty it would be free but that expired in 2011. i have seen many of the same complaints about this, mazda has admitted to it being a problem but has not recalled it. we have two kids and thank god nothing serious has happened with us in the car. this problem could very easily cause injury or deaths to any drivers on the road. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 107000 miles. Vehicle Identification Number (VIN):1YVFP80C835. Mazda Mazda6 2003 problem was reported in PORTLAND, OR. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 10 mph.

Mazda Mazda6 2003 Vehicle Speed Control

Mazda Mazda6 2003 Vehicle Speed Control Review #10587693

MAZDA MAZDA6 2003 car safety problem was reported on May 02, 2014.MAZDA MAZDA6 2003, manufactured by Mazda Motor Corp. had a problem with VEHICLE SPEED CONTROL . was at a stop sign to make a left turn half way thru the car stalled and all lights came on, vehicle behind me almost ran into us. barely got pulled over to the side of the road had to turn car off and then back on the check engine light remained on but vehicle would drive, after about 5 starts the light came off had the car checked, was told it was the throttle body. one week later same thing wet to pull onto a busy street and car stalled almost causing another wreck, tried to drive it home and stopped at the grocery store, when i went to pull in the car stalled again in the middle of the street, blocking on coming traffic. called mazda to see how much it would cost to be fixed, the lady told me that if it was still under warranty it would be free but that expired in 2011. i have seen many of the same complaints about this, mazda has admitted to it being a problem but has not recalled it. we have two kids and thank god nothing serious has happened with us in the car. this problem could very easily cause injury or deaths to any drivers on the road. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 107000 miles. Vehicle Identification Number (VIN):1YVFP80C835. Mazda Mazda6 2003 problem was reported in PORTLAND, OR. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 10 mph.

Mazda Mazda6 2003 Unknown Or Other

Mazda Mazda6 2003 Unknown Or Other Review #10621857

MAZDA MAZDA6 2003 car safety problem was reported on Aug 12, 2014.MAZDA MAZDA6 2003, manufactured by Mazda Motor Corp. had a problem with UNKNOWN OR OTHER . driving at approximately 60 mph on a state highway, the vehicle suddenly went into limp mode. from the sudden jump into limp mode, a multi-car accident was narrowly avoided. this is definitely a safety concern. thankful nobody was hurt..0 person(s) were injured. 0 person(s) died.Mileage was 164354 miles. Vehicle Identification Number (VIN):1YVHP80DX35. Mazda Mazda6 2003 problem was reported in SHELBYVILLE, IN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 60 mph.

Mazda Mazda6 2003 Air Bags

Mazda Mazda6 2003 Air Bags Review #10639806

MAZDA MAZDA6 2003 car safety problem was reported on Sept 29, 2014.MAZDA MAZDA6 2003, manufactured by Mazda Motor Corp. had a problem with AIR BAGS . tl* the contact owns a 2003 mazda6. the contact received a recall notification for nhtsa campaign number: 14v362000 (air bags); however, the part needed to repair the vehicle was unavailable. the contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. the manufacturer was notified of the issue. the contact had not experienced a failure. updated 11/20/14*lj.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVFP80C835. Mazda Mazda6 2003 problem was reported in PALO ALTO, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2003 Electrical System

Mazda Mazda6 2003 Electrical System Review #10644655

MAZDA MAZDA6 2003 car safety problem was reported on Sept 09, 2014.MAZDA MAZDA6 2003, manufactured by Mazda Motor Corp. had a problem with ELECTRICAL SYSTEM . my vehicle has been having an issue with the throttle position sensor. as well as the pcm, usually connected as noted by my mechanic. 3 things can come from this he said. i could be having an issue with the gas pedal, the computer, or i need a new throttle body. from my understanding so far the issue causes the computer to incorrectly read, causing the check engine light as well as a few others to abruptly turn on while car is in full motion, for me this is typically at 55 mph. the car then looses the ability to properly accelerate, or decelerate. i have to quickly pull my car to the shoulder, put in park while the car seems to be lurching forward, and turn off the engine. if i do not do this quick enough the engine begins to rev high and low continuously. my rpm gauge bounces around as it is doing so. after leaving the car off for a few moments i can then restart. my check engine light will now stay on for about 50 miles and turn itself off. once the light has gone off usually withing 15 miles my car will do it all over again. after calling my dealer, because i still owe 2 more years of payment on the car, i am told that they can fix it if i have my warranty intact. unfortunately it has run out as of july. the part alone from the dealership is $700. why is there no recall on this issue if so many people are having it?.0 person(s) were injured. 0 person(s) died.Mazda Mazda6 2003 problem was reported in GEORGETOWN, DE. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2003 Engine

Mazda Mazda6 2003 Engine Review #10644655

MAZDA MAZDA6 2003 car safety problem was reported on Sept 09, 2014.MAZDA MAZDA6 2003, manufactured by Mazda Motor Corp. had a problem with ENGINE . my vehicle has been having an issue with the throttle position sensor. as well as the pcm, usually connected as noted by my mechanic. 3 things can come from this he said. i could be having an issue with the gas pedal, the computer, or i need a new throttle body. from my understanding so far the issue causes the computer to incorrectly read, causing the check engine light as well as a few others to abruptly turn on while car is in full motion, for me this is typically at 55 mph. the car then looses the ability to properly accelerate, or decelerate. i have to quickly pull my car to the shoulder, put in park while the car seems to be lurching forward, and turn off the engine. if i do not do this quick enough the engine begins to rev high and low continuously. my rpm gauge bounces around as it is doing so. after leaving the car off for a few moments i can then restart. my check engine light will now stay on for about 50 miles and turn itself off. once the light has gone off usually withing 15 miles my car will do it all over again. after calling my dealer, because i still owe 2 more years of payment on the car, i am told that they can fix it if i have my warranty intact. unfortunately it has run out as of july. the part alone from the dealership is $700. why is there no recall on this issue if so many people are having it?.0 person(s) were injured. 0 person(s) died.Mazda Mazda6 2003 problem was reported in GEORGETOWN, DE. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2003 Vehicle Speed Control

Mazda Mazda6 2003 Vehicle Speed Control Review #10644655

MAZDA MAZDA6 2003 car safety problem was reported on Sept 09, 2014.MAZDA MAZDA6 2003, manufactured by Mazda Motor Corp. had a problem with VEHICLE SPEED CONTROL . my vehicle has been having an issue with the throttle position sensor. as well as the pcm, usually connected as noted by my mechanic. 3 things can come from this he said. i could be having an issue with the gas pedal, the computer, or i need a new throttle body. from my understanding so far the issue causes the computer to incorrectly read, causing the check engine light as well as a few others to abruptly turn on while car is in full motion, for me this is typically at 55 mph. the car then looses the ability to properly accelerate, or decelerate. i have to quickly pull my car to the shoulder, put in park while the car seems to be lurching forward, and turn off the engine. if i do not do this quick enough the engine begins to rev high and low continuously. my rpm gauge bounces around as it is doing so. after leaving the car off for a few moments i can then restart. my check engine light will now stay on for about 50 miles and turn itself off. once the light has gone off usually withing 15 miles my car will do it all over again. after calling my dealer, because i still owe 2 more years of payment on the car, i am told that they can fix it if i have my warranty intact. unfortunately it has run out as of july. the part alone from the dealership is $700. why is there no recall on this issue if so many people are having it?.0 person(s) were injured. 0 person(s) died.Mazda Mazda6 2003 problem was reported in GEORGETOWN, DE. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Mazda Mazda6 2003 Power Train

Mazda Mazda6 2003 Power Train Review #10649347

MAZDA MAZDA6 2003 car safety problem was reported on Oct 08, 2014.MAZDA MAZDA6 2003, manufactured by Mazda Motor Corp. had a problem with POWER TRAIN . transmission kicks really hard making the car feel like it was hit from behind. the car is hard to control at the time this happens. i've seen numerous complaints about this. it is a serious problem,especially when our 90lb daughter is driving this vehicle. i feel that mazda needs to take care of this issue before someone is injured or worse!.0 person(s) were injured. 0 person(s) died.Mileage was 105000 miles. Vehicle Identification Number (VIN):1YVHP80D235. Mazda Mazda6 2003 problem was reported in PELL CITY, AL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 20 mph.

Mazda Mazda6 2003 Engine

Mazda Mazda6 2003 Engine Review #10671839

MAZDA MAZDA6 2003 car safety problem was reported on Jan 17, 2014.MAZDA MAZDA6 2003, manufactured by Mazda Motor Corp. had a problem with ENGINE . bought a 2003 mazda 6 last year, my tachometer kept going crazy and the car would die out. i took it to good year, 3 codes came up. they changed the cam shaft sensor and the egr valve. that didn't fix the problem, good year took the parts out, put mine back in and told me to take it to a mazda dealership. i took it to mazda, they told me i had to change my pcm because it was shorting out, and my egr valve and that should take care of the problem. they quoted me 2k dollars for everything. i asked them how much they were charging for the parts, they told me 1100 for the pcm and 200 for the egr, the rest was labor. as the service advisor quoted me prices, i told her i can buy a pcm online for 145. she said, yes, you can do that, but we won't warranty the job because it's not our part. i told them are you sure that will take care of the problem? they said yes. i told them okay fine! constantly calling the dealership for 2 weeks asking when i was going to get my car back, they gave me a loaner. i had that for a week, so they had my car a total of 3 weeks. finally i called again, i asked them what's going on with my car. they told me, i need a new engine. i was like what? what happened to 2k will take care of the problem? they said no, there's too much sludge in the engine, you need a new one. upset, i'm already in for 2k and now they want me to spend another 5k for a new engine. mind you, i was already hesitant because of the price of the pcm. any way, service advisor tells me, i can buy a new/used engine online for 500 and have them change it. i told them that was the whole reason, i didn't buy the pcm online!i was told you wouldn't warranty it, now you want me to buy one online? i went to the dealership, picked up my car, still the same problem. i'm not the only one,see link ... https://www.youtube.com/watch?v=xpkzphe4sbi or www.youtube.com/watch?v=n6foaybw_5k .0 person(s) were injured. 0 person(s) died.Mileage was 87200 miles. Mazda Mazda6 2003 problem was reported in WAIANAE, HI. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 5 mph.

Air Bags 7 Review(s)

Air Bags Frontal 2 Review(s)

Electrical System 9 Review(s)

Electrical System Alternator/generator/regulator 1 Review(s)

Electrical System Fuses And Circuit Breakers 1 Review(s)

Electrical System Ignition 2 Review(s)

Electrical System Wiring 1 Review(s)

Electrical System Wiring Front Underhood 1 Review(s)

Electrical System Wiring Interior/under Dash 1 Review(s)

Engine 6 Review(s)

Engine And Engine Cooling 12 Review(s)

Engine And Engine Cooling Cooling System 2 Review(s)

Engine And Engine Cooling Cooling System Fan 1 Review(s)

Engine And Engine Cooling Engine 10 Review(s)

Engine And Engine Cooling Exhaust System 6 Review(s)

Engine And Engine Cooling Exhaust System Emission Control 1 Review(s)

Engine And Engine Cooling Exhaust System Emission Control Catalytic Convertor 4 Review(s)

Engine And Engine Cooling Exhaust System Manifold/header/muffler/tail Pipe 1 Review(s)

Equipment Electrical 2 Review(s)

Equipment Electrical Radio/tape Deck/cd Etc. 1 Review(s)

Exterior Lighting 1 Review(s)

Fuel System, Diesel Storage Tank Assembly 1 Review(s)

Fuel System, Gasoline 6 Review(s)

Fuel System, Gasoline Delivery 1 Review(s)

Fuel System, Gasoline Delivery Fuel Pump 1 Review(s)

Fuel System, Gasoline Storage Tank Assembly 1 Review(s)

Fuel System, Other 2 Review(s)

Latches/locks/linkages 1 Review(s)

Latches/locks/linkages Doors Latch 1 Review(s)

Power Train 5 Review(s)

Power Train Automatic Transmission 14 Review(s)

Power Train Automatic Transmission Control Module (tcm, Pcm) 1 Review(s)

Power Train Automatic Transmission Torque Converter 1 Review(s)

Power Train Clutch Assembly 2 Review(s)

Power Train Clutch Assembly Pedal/linkage 4 Review(s)

Power Train Driveline 1 Review(s)

Power Train Manual Transmission 7 Review(s)

Power Train Manual Transmission Floor Shift Assembly 1 Review(s)

Seat Belts Front Retractor 1 Review(s)

Seats 1 Review(s)

Service Brakes, Air Antilock 1 Review(s)

Service Brakes, Air Controls Foot Control 1 Review(s)

Service Brakes, Air Disc Pads 2 Review(s)

Service Brakes, Air Disc Rotor 1 Review(s)

Service Brakes, Air Supply Hoses, Lines/piping, And Fittings 1 Review(s)

Service Brakes, Electric 1 Review(s)

Service Brakes, Hydraulic 7 Review(s)

Service Brakes, Hydraulic Antilock 1 Review(s)

Service Brakes, Hydraulic Foundation Components Disc Pads 2 Review(s)

Service Brakes, Hydraulic Foundation Components Disc Rotor 5 Review(s)

Service Brakes, Hydraulic Foundation Components Hoses, Lines/piping, And Fittings 2 Review(s)

Service Brakes, Hydraulic Foundation Components Master Cylinder 1 Review(s)

Steering 2 Review(s)

Steering Hydraulic Power Assist System 1 Review(s)

Steering Rack And Pinion 2 Review(s)

Steering Wheel And Handle Bar 1 Review(s)

Structure 4 Review(s)

Structure Frame And Members Underbody Shields 1 Review(s)

Structure Body 2 Review(s)

Structure Body Door 2 Review(s)

Structure Body Door Hinge And Attachments 1 Review(s)

Suspension 4 Review(s)

Suspension Front 3 Review(s)

Suspension Front Springs Leaf Spring Assembly U-bolt, Leaf Spring To Axle 1 Review(s)

Suspension Rear 1 Review(s)

Tires 3 Review(s)

Tires Tread/belt 1 Review(s)

Unknown Or Other 3 Review(s)

Vehicle Speed Control 16 Review(s)

Visibility Defroster/defogger System 1 Review(s)

Visibility Defroster/defogger System Windshield Controls/wiring 1 Review(s)

Visibility Power Window Devices And Controls 1 Review(s)

Visibility Windshield Wiper/washer 1 Review(s)

Wheels Lugs/nuts/bolts 1 Review(s)

Wheels Rim 1 Review(s)