view Mazda Engine And Engine Cooling Engine problem reportsMazda Engine And Engine Cooling Engine

Car-and-Safety.com | MAZDA>MAZDA Engine And Engine Cooling Engine


Mazda Engine And Engine Cooling Engine Reports

17 Mar

MAZDA NAVAJO 1992 Due To The Control Arm and the bushing failure the vehicle shakes. *ak consumer states the front end of vehicle makes a noise and
MAZDA PROTEGE 1991 While Stopped In Drive Gear with foot on brake, vehicles front suspension vibrates, dealer has replaced motor mounts, but problem persists.

MAZDA 626 1994 Purchase Car New The Transmission was replaced the engine light keeps coming on the computer system was replaced please describe the problem .
MAZDA MPV 1994 Crack In Cylinder Head Pistons inoperative. please explain other problems. tt
MAZDA MPV 1992 All Rocker Arms And Lash adjusters had to be replaced due to inconsistent direction peeling w/metal shavings and severe thumping. 3 replacements were are
MAZDA MPV 1992 Engine Pistons Builds Up Carbon, only repair available is to replaced engine. tt
MAZDA GLC 1982 Crankshaft Has Broken, Vehicle seized while driving. *ak
MAZDA 626 1991 Replaced Engine Oil Pan. *ak
MAZDA 323 1987 Crankshaft Cracked Where It Attached to the timing belt pulley. tt
MAZDA 626 1998 The External Spring For The timing belt tensioner broke. also, engine was not running. this vehicle was not covered under
MAZDA 626 1998 While The Vehicle Is Idling engine will race at a very high rpms. dealership has examined vehicle, and determined that
MAZDA 626 1999 Vehicle Stalled At 60mph without warning. after consumer pulled vehicle off the road smoke was coming from underneath the hood.
MAZDA TRIBUTE 2001 While Driving Through A Big puddle of water, water was too high and it went into vehicle's air filter and caused hydro locking
MAZDA MILLENIA 1995 While Driving About 60 Mph engine had shut down without a prior warning. engine could not be restarted, and vehicle was towed to
MAZDA 626 2000 Engine Overheated And Lost Power and vehicle stalled. also vehicle was leaking oil. *ak
MAZDA MILLENIA 1995 Camshaft Failed And Engine quit and died.*ak
MAZDA MILLENIA 1995 There Is A Strong Odor of gasoline inside of vehicle. also, engine check light comes on. owner's manual
MAZDA MILLENIA 1995 Camshaft Broke. dealer replaced motor.*ak
MAZDA MILLENIA 1995 Consumer Was Traveling 35 Mph and lost all power. there was manuvering of steering & brakes. mechanic at a garage showed consumer
MAZDA 626 1994 Engine Mounts Broke. dealer has replaced mounts. *ak all motor mounts broke in two pieces, consumer paid for
MAZDA 626 1993 Vehicle Was Leaking Oil & both front wheel axles were broken. prying wheel axles apart mechanic found that camshaft severly damaged.
MAZDA RX 7 1994 There Was Coolant Leak From vehicle onto engine. vehicle was not included in recall 94v094000. dealer has replaced water pump,
MAZDA 626 1997 Recall 98v206001 Done In June 1999, problems with vehicle ever since, timing chain replaced a second time in october 2000.
MAZDA 626 1998 Vehicle Would Stall Out While driving. engine would overheat & start smoking. towed to mazda dealership & mechanic indicated no oil in
MAZDA 626 1998 After Vehicle Was Repaired By dealer under recall 00v134000 vehicle became inoperable. dealer was not able to correct the problem.
MAZDA MILLENIA 1995 Premature Wear Of The Valve cover gasket, causing oil to leak onto the cylinders, resulting in poor performance of engine.
MAZDA MIATA 1991 Crankshaft/pulley Pins Have Sheared Off. provide further detail.*ak
MAZDA MILLENIA 1995 Oil Pressure Sending Unit Is leaking at 90,000 miles, causing a loss of oil due to poor manufacturing. *ak *ml
MAZDA 929 1988 While Driving Timing Belt sheared off for the sixth time without a warning. this vehicle has been through a total
MAZDA PROTEGE 1997 Engine Idled Roughly. vehicle was under warranty. dealer tightened engine valves. 2 months later, warranty expired.
MAZDA 626 1995 Engine Mounts Corrode And Break which causes engine to drop while driving. breaks transmisson seals on drive axle's causing fluid loss ,or
MAZDA 626 1996 When Consumer Statrts Vehicle the engine taps loud noises. also, the engine checklight stays on for a long period of time.
MAZDA B SERIES TRUCK 1991 The Engine Control Module Malfunctioned, causing the vehicle to completely shut down. consumers investigation has revealed the cause of the failure to be
MAZDA MPV 1991 The Engine Head Gasket Blew, causing water / coolant leakage, causing engine to overheat. vehicle was inspected by dealer and independent shops.
MAZDA 626 1995 Hydraulic Valve Lifter Within The engine valve cover gaskets; 14 out of 16 lifters have gone bad. manufacturer is aware of the
MAZDA MX 6 1993 Engine Is Making A Knocking noise. contacted dealer, and informed consumer that there was a technical bulletin with the same basic problem,
MAZDA MPV 1992 Does Not Allow For Enough oil flow in the engine lifters, causing engine failure . manufactureris aware of defect,
MAZDA PROTEGE 1995 When Driving At Any Speed timing belt failed, causing the vehicle to stall and jerk.also a loud noise coming from the
MAZDA MPV 1994 Spring Inside Engine Lifters gave out.car was under warranty.consumer contacted dealer. *ak
MAZDA PROTEGE 1997 Engine Mounts. Rattle Noice inside the hood when car sits at an idle & reverse.also with a/c on & it vibrates.
MAZDA MPV 1992 Feed Hose Is Too Small for the oil to go through, causing the lifter to collaspe against rocker arm, resulting in a loud
MAZDA PROTEGE 1998 While Pulling Into Parking Space with foot on brakes vehicle suddenly accelerated. the vehicle jumped the parking bump & hit a brick wall.
MAZDA NAVAJO 1991 Vehicle Won't Go Into Reverse due to transmission failure. also, bracket separated from the rear end, and vehicle squeaks when
MAZDA MILLENIA 1995 While Driving 55 Mph On the highway engine locked up without warning due to leakage from the oil pan. please give any further
MAZDA 626 1996 Oil Pressure Switch Broke, causing the oil to discharge into the exhaust, resulting in a potential saftey hazard. *ak
MAZDA 626 1994 The Valve Cover Gaskets Are leaking oil onto engine, causing vehicle to jerk and hesitate. dealer has seen vehicle.
MAZDA MILLENIA 1995 Engine Check Light Came On because the gaskets are leaking oil. dealer replaced the valve gaskets and the seals. leaking oil messed up
MAZDA 626 1997 Consumer Received Recall Letter In october concerning engine timing belt. dealer had no parts available to remedy the problem. recall number 98v20600.
MAZDA 626 1994 When Driving The Vehicle It would not shift. transmission was replaced. also, vehicle leaks oil which requires a valve cover
MAZDA 626 1997 Collision Was Cause By loss of control due to engine stalling. consumer received a recall notice from the mfr. concerning mazda/timing
MAZDA MPV 1990 Vehicle Experienced Smoke And Gas smell from engine which may cause a fire. cause unknown. please provide further information.
MAZDA MPV 1992 The Engine Is Making A loud tkicking noise.the consumer states the engine is about to go out due to defective engine lifters. *ak
MAZDA RX7 1988 When Warm The Vehicle Shuts off. it floods itself when trying to restart. problem still exists, dealer cannot repair
MAZDA 626 1995 Transmission Jumps Out Of Gear and also hesitates when putting car in gear. the consumer had contacted the dealership and the
MAZDA MPV 1991 Engine Check Light Came on. temperature read hot. attempted to pull the car over and all indicator lights were
MAZDA 626 1996 While Driving About 45mph, vehicle stopped for no reason. was unable to shift into another gear. had vehicle towed home.
MAZDA 929 1991 While Driving At A normal speed of 55-60mph on dry pavement the right engine head cracked. it is unusual for
MAZDA MPV 1991 Engine Lifters Went Bad two years ago , so the dealer has replaced the lifters . owner took vehicle into dealer
MAZDA MPV 1992 Driving 35mph, Heard A buzzing noise when the engine stopped for no reason. vehicle seemed to be in neutral. could not shift
MAZDA 323 1989 The Crankshaft Pulley Bolt Broke, without warning, causing engine failure. please describe details.
MAZDA 323 1989 The Crankshakt Has Been Replaced at four different times . *ak
MAZDA MILLENIA 1995 The Engine Valve Cover Gasket cracked, causing oil to leak unto the spark plugs.
MAZDA PROTEGE 1992 While Driving Vehicle The Engine broke a rod, causing owner to make an emergency stop on the highway. owner took vehicle to
MAZDA RX7 1989 Consumer Was Driving And The abs brake light came on , took to dealer the oil was leaking . please describe .
MAZDA MPV 1991 Due To A Faulty Engine head gasket, the engine overheated and developed a crack and ceased to run. please give
MAZDA TRIBUTE 2001 At 30-50 Mph Traveling Down hill engine stalled twice. consumer lost complete control of the steering which made it difficult to pull over
MAZDA 626 1999 Consumer Stated That While Driving heard a noise from engine and vehicle stalled. dealer advised that the timing belt tensioner broke causing stall.
MAZDA PROTEGE 2002 Consumer States Engine Makes A rattling noise when started. noise is also heard when accelerating after vehicle has come to a complete stop.
MAZDA MILLENIA 1998 There Is A Fuel Leak inside of the engine compartment. due to an odor fuel smell coming inside of the vehicle dealer
MAZDA PROTEGE 2000 Consumer States That While Driving vehicle at highway speeds, consumer stated vehicle hit something that was in the road that was very hard,
MAZDA TRIBUTE 2002 Consumer States That While Driving at any speed and no warning the vehicle will shut off causing consumer to pull over and it will be
MAZDA MPV 2000 While Driving Engine Pulley Fell off, causing consumer to lose control of vehicle. bolt that held it in place broke
MAZDA 626 1999 Owner Started Having Problems With stalling. she was told by mazda that the external spring in timing belt tesioner broke. mazda does
MAZDA TRIBUTE 2002 While Traveling On Highway And without prior warning vehicle shut down and stalled. dealership was aware of problem.*ak
MAZDA 626 1996 Vehicle Is Leaking Oil, and consumer has to add oil every few days. please provide further information.*ak
MAZDA PROTEGE 1999 Consumer States That There Was an oil leak in his vehicle which was caused by a cracked engine block. nlm. consumer also
MAZDA 626 1997 Intermittently Vehicle Jerks/ Sputters And jumps out of gear or gets stuck between gears. gear is shifted to neutral first before going into
MAZDA 626 1997 Engine Timing Chain And Gear malfunctioned. *ak
MAZDA 626 1998 Vehicle Stalled At 5 Mph. dealer replaced a broken timing belt tensioner.*ak
MAZDA NAVAJO 1993 Vehicle Vibrates Severely When Driving between 50-70mph, a tsb was issued for this problem feb,1996, a kit to replace engine mounts and
MAZDA TRIBUTE 2001 Vehicle Was Parked And Without prior warning oil was leaking from underneath the vehicle. the dealership is aware of the problem.*ak
MAZDA 626 1998 Consumer Stated The Vehicle Stalled at 40-50 mph, the vehicle was towed to dealer. dealer determined that timing belt tensioner had broken and
MAZDA 626 1998 Timing Belt Was Not Working properly. belt wore out and tensioner has popped off. contacted dealer ,and dealer noted
MAZDA 626 1998 Timing Belt Tensioner Has Broken. a recall has been issued on vehicle make and model; however, this vehicle was not included due
MAZDA PROTEGE 1995 Consumer Was Traveling About 50mph on highway and without prior warning vehicle turned off. vehicle had to be towed. garage
MAZDA MX 6 1991 After Changing Oil, Consumer noticed smoke coming from the tail pipe. after vehicle sat over night, and started it for
MAZDA 626 1997 2-4 Servo Piston Failed.
MAZDA 626 1995 Valve Cover Gasket Failed. yh
MAZDA MIATA 2000 Car Continues To Have "check engine light". dealer indicated 3 weeks ago that there was a failure in cylinder #3, but they will
MAZDA MPV 2000 While Driving On The Freeway the van suddenly lost power to the wheels, even though the engine was still running. had it towed
MAZDA 626 1998 My 1998 Mazda 626 Did not qualify for recall #92007, engine timing belt tensioner, due to "vehicle identification number provided does not qualify
MAZDA B2200 1987 Had Nev. Valve Train rebuild the engine,has 4000mileson it now,needs 2700 worth of repairs needed to fix rebuild engine(as per mazda )
MAZDA 626 1998 Mazda Corp States That My vin is not 'on the list' but dealer stated that it is unusual for spring to fail. my vehicle
MAZDA 626 1998 The Problem That I Am experiencing with my car is an external spring in the timing belt tensioner broke.this is a problem that
MAZDA 626 1997 The Vehicle Stalled After A scheduled oil change. after returning to the service center where the oil change was performed, i
MAZDA NAVAJO 1993 The Heads Were Severly Cracked. the mechanic said that this should have been recalled because there have , not only been so many
MAZDA 626 1998 While Driving, At Speed slightly above 25 mph, the vehicle stalled while engine was running. when vehicle was attempted to restart,
MAZDA TRIBUTE 2001 After Parking Vehicle, Heard loud crash. look on ground and found tension pulley and spring fell off vehicle. when started,
MAZDA PROTEGE 1997 Engine Idled Up Or Down at stop with foot on brake car would sometimes race up over 300 rpms shut engine off to stop it
MAZDA NAVAJO 1993 The Heads Were Severly Cracked. the mechanic said that this should have been recalled because there have , not only been so many
MAZDA PROTEGE 1992 Main Bearings On Crank Blew, even though car has only 65000 miles oil is changed every 4 months or 3000 whichever comes first.
MAZDA MIATA 1992 Engine Timing Pulley Became Dismounted from crankshaft - result is engine replacement
MAZDA NAVAJO 1994 Pulley Was Defective And Redesigned. owners should be notified that pulley can disentegrate causing belt to break resulting in loss of power steering,
MAZDA MPV 1994 Lifters & Rocker Arms Replaced 3 times - carbon build up was never fixed causes engine to need replacement. *ak
MAZDA 323 1989 Mechanic Was Informed By Mazda to carefully observe belt tension. mechanic feels that mazda's design on the crankshaft has too little metal left after
MAZDA 626 1998 Car Ran Hot , woulldn't fixx, broke both camshafts in the heads. *ak
MAZDA MILLENIA 1995 Engine Gaskets Disintergrated Allowing Oil into gaps on spark plugs thus preventing several cylinders from firing. automobile did not respond as it should
MAZDA MIATA 1990 Mfg Recommended 60,000 Mi timing belt was changed at 59,000 mi... all routine maintenance performed per mfg specs. failure
MAZDA MILLENIA 1995 At 81,100 Miles The engine"check light came on. the dealer told me to replace the crankshaft sensor at $700.00 which i did.
MAZDA MPV 1993 Engine Makes A Terrible Knocking noise (tapping noise). i was told that lifters are not getting lubricated. advised to use thinner oil on
MAZDA 626 1995 Car Broke Down After Oil light came on and will not start--there was an oil leakage near filter--replaced oil and engine still would not start
MAZDA 626 1994 Motor Mount Broken, Constant problems. *ak
MAZDA MPV 1994 This Problem With The Lifters has been reported two separate times. both times we were given a major run around in order to get
MAZDA 626 1997 When The Gear Shift Is in drive, and the brake is pressed, the car shakes violently and so much that it actually creates
MAZDA MIATA 1990 60,000 Timing Belt Replacement performed at 56k miles. cost to repair engine estimated to be $2,200. *ak
MAZDA MPV 1990 Engine Head Gasket/ Water Pum, and heater core failed 3 times, smoke from the engine..
MAZDA MX 6 1994 It Seems As If The entire electrical system and engine valves are faulty. i have seen many tsb's about all related problems..
MAZDA MPV 1992 Oil Smoke, Valve Or lifter noise, rattle when vehicle not in acceleration. *ak
MAZDA 929 1992 On The Above Mentioned Dates i encountered mechinical problems which consisted of my cooling system. i replaced the water pump, thermost,
MAZDA MPV 1995 I Have Repeatedly Reported The loud ticking noise which the lifters make only with a cold engine, however the dealer is patronizing, and
MAZDA MPV 1993 Cooling System Keeps Failing, timing belt keeps failing. vehicle not reliable...would never buy one again. *ak
MAZDA MX 6 1994 Oil Pump Failed. Yh
MAZDA 626 1998 626 Taken To Mazda To have transmission checked for rough shifting and clunking noise. mazda said the transmission was defective and needed to be
MAZDA MILLENIA 1998 Engine--camshaft.
MAZDA NAVAJO 1994 Drive Belt Failed, Causing noise.
MAZDA MPV 1991 Head Gasket Failed.
MAZDA MPV 1991 Timing Belt Failed.
MAZDA 626 1995 Replaced Engine Gasket Due To an oil leak, also replaced drain washer. *ak
MAZDA 626 2000 The Cylinder Heads Have Failed twice due to internal failure and a crack near the #2 cylinder spark plug hole causing the rpm's to be
MAZDA MILLENIA 1995 The Vehicle's Camshaft Broke While driving ruining the entire engine. nlm
MAZDA MILLENIA 1995 The Water Pump And Timing belt failed. nlm
MAZDA PROTEGE 1995 The Engine Burns Oil Excessively due to head gasket failure. yh
MAZDA 626 1990 Pistons And Oil Seals Failed. yh
MAZDA 323 1993 Vehicle Experiencing Pan Gasket And belt failures. nlm
MAZDA 626 1993 Timing Belt Tensioner Continually Failing. mjs
MAZDA 626 1993 Valve Cover Gasket Failed Resulting in leakage. mjs
MAZDA PROTEGE 1990 Motor Mounts Failed Causing Excessive vibration. mjs
MAZDA MPV 1994 Lifters In Upper Valve Train assembley makes clicking noise.
MAZDA MILLENIA 1995 Valve Cover Gasket Cracked Causing oil to leak on park plugs. nlm
MAZDA 626 1997 Recall Repair Work On The timing belt tensioner denied due to lack of parts.
MAZDA B SERIES TRUCK 1993 Engine Cylinder Head/radiator/battery/fan/thermostat And Clutch failed. *ak
MAZDA 626 1997 Engine Malfunction.
MAZDA 626 1994 Valve Cover Seal Fails, causing oil to reach plugs and evenutally fouling the plugs.
MAZDA MPV 1989 Timing Belt Failed.
MAZDA MX 6 1993 Dealer Recommends That Engine Be replaced due to oil sending unit malfunction. claims that this is a common problem for mazda.
MAZDA MIATA 1991 Timing Belt Pulley Came Loose and ruined the engine. in later designs, the manufacturer beefef up the crankshaft and added a larger
MAZDA NAVAJO 1993 Motor Mounts Failed.
MAZDA B SERIES TRUCK 1993 Crankshaft Broke.
MAZDA B SERIES TRUCK 1993 Timing Belt Failed.
MAZDA MPV 1991 Valve Train In The Engine failed, causing noise.
MAZDA MPV 1994 Rocker Arm And Shaft Replaced resulting in engine noise, however carbon build up still present.
MAZDA MPV 1993 Engine Rocker Arm Shafts Failed due to a design flaw. this is a common problem with early versions v-6 engines. mazda issued a
MAZDA 323 1988 Valve Body Failed.
MAZDA MIATA 1995 Noisy Engine Valve Train. *ak
MAZDA PROTEGE 1995 Cracked Engine Block/broken Connecting Rod. *ak
MAZDA MPV 1989 Engine Cylinder Head Failed For no apparent reason. *ak
MAZDA MX 6 1994 Radiator Malfunctioned. In Addition, driver's seat belt/door locks/ oxygen sensor and engine valves failed, causing engine to be excessively noisy.
MAZDA MIATA 1990 Crankshaft Failure. Claims this problem is common to miatas and 323 between years 1990-1991. *ak
MAZDA 626 1990 Enginehead Gasket Failed Twice, causing vehicle to overheat. *ak
MAZDA RX 7 1993 The Vehicle Had An Exhaust leak in the area of the exhaust manifold and/or gasket.
MAZDA PROTEGE 1995 Car Died While Traveling On hwy. timing belt replaced.
MAZDA 929 9999 Timing Belt Failed.
MAZDA 929 9999 Timing Belt Failed.
MAZDA B2200 1989 Due To Its Size Rocker arm causes noise, this rocker arm was modified and installed in other vehicles. consumer complains that he heard
MAZDA MX 6 1993 Cam Sensor Failed.
MAZDA MPV 1992 Engine Lifters Replaced.
MAZDA MPV 1994 Lifters In Upper Valve Train make clicking noises. *ak
MAZDA 626 1993 Valve Lifters Failed.
MAZDA 626 1989 Engine Mounts Failed, Causing vehicle to grind and would not shift gears properly. *ak
MAZDA 323 1988 Crankshaft Broke.
MAZDA MPV 1989 Timing Belt Failed, Causing vehicle to stall.
MAZDA 626 1990 Oil Pump Failed.
MAZDA 626 1994 Motor Mounts Failed.
MAZDA MX6 1989 Valve Cover Gasket Failed.
MAZDA 323 1990 Cam Gear/bolt Securing Cam Gear broke, causing vehicle to stall. *sd
MAZDA 626 1990 Engine Air Intake Hose Cracked, causing vehicle to stall/surge. *dsh
MAZDA MPV 1989 Cylinder Head Cracked. *dsh
MAZDA NAVAJO 9999 Oil Leaking From Engine Gasket.
MAZDA 626 1991 Timing Belt Broke. *sd
MAZDA RX7 1989 Engine Replaced Due To Defect. *sd
MAZDA 626 1989 Vibration Under Hood Due To motor mounts failing.
MAZDA MAZDA TRUCK 1987 Cracked Engine Head. *sd
MAZDA MAZDA TRUCK 1987 Piston Rings Replaced. *sd
MAZDA 626 1993 Oil Dipstick Replaced.
MAZDA MX 6 1993 Water Entered The Engine Causing it to blow a rod/crack the block. *dsh
MAZDA 626 1991 Cylinder Head Cracked. *dsh
MAZDA B SERIES 1992 Cracked Cylinder Head.
MAZDA B SERIES 1992 Engine Head Gasket Failed, causing engine to smoke/poor visibility/accident. *skd
MAZDA NAVAJO 1991 Engine Cylinder Head Cracked. *skd
MAZDA MX6 1989 Valve Cover Gasket Replaced Due to leak.
MAZDA 323 1988 Bolt That Connects Timing Belt/pulley to crankshaft broke, causing vehicle to stall. *ak
MAZDA 626 1993 Replaced Engine Mounts, Also replaced engine cylinder heads due to excessive carbon build-up. *ak
MAZDA 929 1991 Engine Cylinder Head Failed. *ak
MAZDA 929 1990 Engine Cylinder Head/head Gasket Cracked. *ak
MAZDA 323 1987 Crankshaft Failed. *ak
MAZDA B SERIES TRUCK 1994 Engine Oil Gasket Leak. *skd
MAZDA MX6 1988 Oil Pan Failure.
MAZDA RX 8 2004 2004 Mazda Rx8. Consumer writes in regards to several defects in the vehicle. *smd the consumer stated about a year after
MAZDA CX 7 2007 I Was Driving My Mazda cx-7 on the highway around 65 mph when my car starting making a loud noise from the engine and had
MAZDA CX 7 2007 My 2007 Mazda Cx-7 Broke down without warning. found out the timing chain had snapped as a result of a piston blowing.

Discuss Mazda Engine And Engine Cooling Engine Problems