Car-and-Safety.com
Mazda 626 1991 Safety Reports and Reviews
Mazda 626 1991 Reviews
Mazda 626 1991 Seat BeltsMazda 626 1991 Seat Belts Review #958189 MAZDA 626 1991 car safety problem was reported on Dec 03, 1994.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SEAT BELTS . when rear ended with foot on brake, drivers shoulder belt didn't restrain from making contact, resulting in an injury. estimated speed of impact 30 mph. tt.Vehicle was involved in a crash. 1 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22B0M5. Mazda 626 1991 problem was reported in ROSEVILLE, CA. Vehicle was not using Cruise Control. Mazda 626 1991 Service Brakes, Hydraulic Foundation Components Disc RotorMazda 626 1991 Service Brakes, Hydraulic Foundation Components Disc Rotor Review #476758 MAZDA 626 1991 car safety problem was reported on Oct 01, 1994.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:ROTOR . continuous warping of front brake rotors, causing brakes to overheat/pulsate and stick. *skd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22B3M5. Mazda 626 1991 problem was reported in FT LAUDERD, FL. Vehicle was not using Cruise Control. Mazda 626 1991 Vehicle Speed ControlMazda 626 1991 Vehicle Speed Control Review #960762 MAZDA 626 1991 car safety problem was reported on .MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with VEHICLE SPEED CONTROL . while driving, experience intermittent sudden acceleration when throttle sticks, and engine surges to high rpm, resulting in loss of control. tt.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22B9M5. Mazda 626 1991 problem was reported in SAN FRANCISC, CA. Vehicle was not using Cruise Control. Mazda 626 1991 Engine And Engine Cooling Exhaust System Emission Control Gas Recirculation Valve (egr Valve)MAZDA 626 1991 car safety problem was reported on Feb 22, 1995.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:GAS RECIRCULATION VALVE (EGR VALVE) . egr valve failed, causing starting problems. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22B9M5. Mazda 626 1991 problem was reported in SAN FRANCISC, CA. Vehicle was not using Cruise Control. Mazda 626 1991 Seat Belts Front RetractorMazda 626 1991 Seat Belts Front Retractor Review #960762 MAZDA 626 1991 car safety problem was reported on Feb 22, 1995.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SEAT BELTS:FRONT:RETRACTOR . shoulder belt fails to retract. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22B9M5. Mazda 626 1991 problem was reported in SAN FRANCISC, CA. Vehicle was not using Cruise Control. Mazda 626 1991 Power Train Automatic TransmissionMazda 626 1991 Power Train Automatic Transmission Review #960762 MAZDA 626 1991 car safety problem was reported on Feb 22, 1995.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . replaced transmission pan. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22B9M5. Mazda 626 1991 problem was reported in SAN FRANCISC, CA. Vehicle was not using Cruise Control. Mazda 626 1991 Engine And Engine Cooling EngineMazda 626 1991 Engine And Engine Cooling Engine Review #960762 MAZDA 626 1991 car safety problem was reported on Feb 22, 1995.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING:ENGINE . replaced engine oil pan. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22B9M5. Mazda 626 1991 problem was reported in SAN FRANCISC, CA. Vehicle was not using Cruise Control. Mazda 626 1991 Seat Belts Front WebbingMazda 626 1991 Seat Belts Front Webbing Review #480606 MAZDA 626 1991 car safety problem was reported on Dec 07, 1994.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SEAT BELTS:FRONT:WEBBING . shoulder belt failed during accident, causing injury. *ak.1 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22B4M5. Mazda 626 1991 problem was reported in ANDALUSIA, AL. Vehicle was not using Cruise Control. Mazda 626 1991 Seat Belts Front Buckle AssemblyMazda 626 1991 Seat Belts Front Buckle Assembly Review #961983 MAZDA 626 1991 car safety problem was reported on .MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SEAT BELTS:FRONT:BUCKLE ASSEMBLY . rear back seat buckle is inoperative. tt.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22B2M5. Mazda 626 1991 problem was reported in ROCKVILLE, MD. Vehicle was not using Cruise Control. Mazda 626 1991 Service Brakes, Hydraulic Foundation Components DrumMazda 626 1991 Service Brakes, Hydraulic Foundation Components Drum Review #479047 MAZDA 626 1991 car safety problem was reported on Dec 14, 1994.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM . loose/noisy rear brakes..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22B8M5. Mazda 626 1991 problem was reported in HOUSTON, TX. Vehicle was not using Cruise Control. Mazda 626 1991 Interior LightingMazda 626 1991 Interior Lighting Review #479047 MAZDA 626 1991 car safety problem was reported on Dec 14, 1994.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with INTERIOR LIGHTING . dome light failed 3 times. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22B8M5. Mazda 626 1991 problem was reported in HOUSTON, TX. Vehicle was not using Cruise Control. Mazda 626 1991 Structure Body Door Hinge And AttachmentsMazda 626 1991 Structure Body Door Hinge And Attachments Review #479047 MAZDA 626 1991 car safety problem was reported on Dec 14, 1994.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with STRUCTURE:BODY:DOOR:HINGE AND ATTACHMENTS . left front door hangs loose. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22B8M5. Mazda 626 1991 problem was reported in HOUSTON, TX. Vehicle was not using Cruise Control. Mazda 626 1991 Seat BeltsMazda 626 1991 Seat Belts Review #481043 MAZDA 626 1991 car safety problem was reported on Feb 03, 1995.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SEAT BELTS . automatic seat belt sticks, causing difficulty exiting vehicle. *skd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22B8M5. Mazda 626 1991 problem was reported in JOSHUA TRE, CA. Vehicle was not using Cruise Control. Mazda 626 1991 Latches/locks/linkages Doors LatchMazda 626 1991 Latches/locks/linkages Doors Latch Review #482001 MAZDA 626 1991 car safety problem was reported on Feb 15, 1994.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with LATCHES/LOCKS/LINKAGES:DOORS:LATCH . rear door latch failed. *skd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22B4M5. Mazda 626 1991 problem was reported in EMELLE, AL. Vehicle was not using Cruise Control. Mazda 626 1991 Seat BeltsMazda 626 1991 Seat Belts Review #964054 MAZDA 626 1991 car safety problem was reported on Apr 20, 1993.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SEAT BELTS . driver's side tractor will not retract at all #tk-b2c-h345 seat belt. tt.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22B6M5. Mazda 626 1991 problem was reported in HIGHLAND, NY. Vehicle was not using Cruise Control. Mazda 626 1991 Seat Belts Front Warning Light/devicesMazda 626 1991 Seat Belts Front Warning Light/devices Review #964054 MAZDA 626 1991 car safety problem was reported on Apr 20, 1993.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SEAT BELTS:FRONT:WARNING LIGHT/DEVICES . seat belt warning light keeps ringing. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22B6M5. Mazda 626 1991 problem was reported in HIGHLAND, NY. Vehicle was not using Cruise Control. Mazda 626 1991 Seat Belts Review #480184 MAZDA 626 1991 car safety problem was reported on Dec 18, 1992.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SEAT BELTS . driver's seat belt fails intermittently. *aw.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22B5M5. Mazda 626 1991 problem was reported in LAKE TARPO, FL. Vehicle was not using Cruise Control. Mazda 626 1991 Latches/locks/linkages Doors LatchMazda 626 1991 Latches/locks/linkages Doors Latch Review #480184 MAZDA 626 1991 car safety problem was reported on Dec 18, 1992.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with LATCHES/LOCKS/LINKAGES:DOORS:LATCH . door locks failed, preventing doors from being opened . *aw.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22B5M5. Mazda 626 1991 problem was reported in LAKE TARPO, FL. Vehicle was not using Cruise Control. Mazda 626 1991 Service Brakes, Hydraulic Foundation Components Disc RotorMazda 626 1991 Service Brakes, Hydraulic Foundation Components Disc Rotor Review #966506 MAZDA 626 1991 car safety problem was reported on July 03, 1992.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:ROTOR . vehicle pull to the left, replace rotors/caliper/rear shoes. tt.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22BXM5. Mazda 626 1991 problem was reported in CHICAGO, 00. Vehicle was not using Cruise Control. Mazda 626 1991 Service Brakes, Hydraulic Foundation Components Disc CaliperMazda 626 1991 Service Brakes, Hydraulic Foundation Components Disc Caliper Review #966506 MAZDA 626 1991 car safety problem was reported on July 03, 1992.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER . vehicle pull to the left, replace rotors/caliper/rear shoes. tt.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22BXM5. Mazda 626 1991 problem was reported in CHICAGO, 00. Vehicle was not using Cruise Control. Mazda 626 1991 Service Brakes, Hydraulic Foundation Components Drum Shoes/liningsMazda 626 1991 Service Brakes, Hydraulic Foundation Components Drum Shoes/linings Review #966506 MAZDA 626 1991 car safety problem was reported on July 03, 1992.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM:SHOES/LININGS . vehicle pull to the left, replace rotors/caliper/rear shoes. tt.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22BXM5. Mazda 626 1991 problem was reported in CHICAGO, 00. Vehicle was not using Cruise Control. Mazda 626 1991 Seat Belts Front Buckle AssemblyMazda 626 1991 Seat Belts Front Buckle Assembly Review #489272 MAZDA 626 1991 car safety problem was reported on Feb 01, 1995.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SEAT BELTS:FRONT:BUCKLE ASSEMBLY . seatbelt buckle failed to engage..0 person(s) were injured. 0 person(s) died.Mazda 626 1991 problem was reported in JOSHUA TRE, CA. Vehicle was not using Cruise Control. Mazda 626 1991 Seat Belts Review #489272 MAZDA 626 1991 car safety problem was reported on Feb 01, 1995.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SEAT BELTS . driver's automatic seatbelt operated unpredictably, cutting driver's scalp. *tw.1 person(s) were injured. 0 person(s) died.Mazda 626 1991 problem was reported in JOSHUA TRE, CA. Vehicle was not using Cruise Control. Mazda 626 1991 Seat Belts Review #486418 MAZDA 626 1991 car safety problem was reported on May 02, 1995.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SEAT BELTS . passenger's automatic belt does not always move forward when door is open. *skd.0 person(s) were injured. 0 person(s) died.Mazda 626 1991 problem was reported in CINCINNATI, OH. Vehicle was not using Cruise Control. Mazda 626 1991 Seat Belts RearMazda 626 1991 Seat Belts Rear Review #970907 MAZDA 626 1991 car safety problem was reported on Aug 12, 1995.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SEAT BELTS:REAR . rear seat belt failed to restrain child seat during an accident. tt.Vehicle was involved in a crash. 0 person(s) were injured. 0 person(s) died.Mazda 626 1991 problem was reported in ABILENE, TX. Vehicle was not using Cruise Control. Mazda 626 1991 Engine And Engine Cooling Exhaust SystemMazda 626 1991 Engine And Engine Cooling Exhaust System Review #974159 MAZDA 626 1991 car safety problem was reported on Oct 27, 1995.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING:EXHAUST SYSTEM . air flow by pass valve, causing the vehicle go high rpms while driving. tt.0 person(s) were injured. 0 person(s) died.Mazda 626 1991 problem was reported in JEFFERSON CI, MO. Vehicle was not using Cruise Control. Mazda 626 1991 Service Brakes, Hydraulic Foundation Components Differential Proportional ValveMAZDA 626 1991 car safety problem was reported on July 23, 1995.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DIFFERENTIAL PROPORTIONAL VALVE . proprtional valve failed, causing brakes to lock up..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22BXM5. Mazda 626 1991 problem was reported in CHICAGO, IL. Vehicle was not using Cruise Control. Mazda 626 1991 Visibility Rearview Mirrors/devices ExteriorMazda 626 1991 Visibility Rearview Mirrors/devices Exterior Review #484425 MAZDA 626 1991 car safety problem was reported on Apr 14, 1992.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with VISIBILITY:REARVIEW MIRRORS/DEVICES:EXTERIOR . replaced broken rearview mirror. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22BXM5. Mazda 626 1991 problem was reported in CHICAGO, IL. Vehicle was not using Cruise Control. Mazda 626 1991 Service Brakes, Hydraulic Foundation Components Drum DrumMazda 626 1991 Service Brakes, Hydraulic Foundation Components Drum Drum Review #484425 MAZDA 626 1991 car safety problem was reported on June 08, 1995.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM:DRUM . rear brake brake shoe/drum system: drum failed prior to recall (93e-035)..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22BXM5. Mazda 626 1991 problem was reported in CHICAGO, IL. Vehicle was not using Cruise Control. Mazda 626 1991 Service Brakes, Hydraulic Foundation Components DiscMazda 626 1991 Service Brakes, Hydraulic Foundation Components Disc Review #484425 MAZDA 626 1991 car safety problem was reported on July 19, 1992.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC . front brakes fail/squeal..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22BXM5. Mazda 626 1991 problem was reported in CHICAGO, IL. Vehicle was not using Cruise Control. Mazda 626 1991 Suspension FrontMazda 626 1991 Suspension Front Review #484425 MAZDA 626 1991 car safety problem was reported on May 15, 1992.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SUSPENSION:FRONT . vehicle skakes/shimmies/pulls to the right..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22BXM5. Mazda 626 1991 problem was reported in CHICAGO, IL. Vehicle was not using Cruise Control. Mazda 626 1991 Electrical System Alternator/generator/regulatorMazda 626 1991 Electrical System Alternator/generator/regulator Review #484425 MAZDA 626 1991 car safety problem was reported on Sept 29, 1992.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with ELECTRICAL SYSTEM:ALTERNATOR/GENERATOR/REGULATOR . replaced noisy alternator..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22BXM5. Mazda 626 1991 problem was reported in CHICAGO, IL. Vehicle was not using Cruise Control. Mazda 626 1991 Service Brakes, Hydraulic Foundation Components Drum Shoes/liningsMazda 626 1991 Service Brakes, Hydraulic Foundation Components Drum Shoes/linings Review #484425 MAZDA 626 1991 car safety problem was reported on June 07, 1995.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM:SHOES/LININGS . replaced noisy rear brake shoes..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22BXM5. Mazda 626 1991 problem was reported in CHICAGO, IL. Vehicle was not using Cruise Control. Mazda 626 1991 Visibility Power Window Devices And ControlsMazda 626 1991 Visibility Power Window Devices And Controls Review #976983 MAZDA 626 1991 car safety problem was reported on Dec 23, 1993.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with VISIBILITY:POWER WINDOW DEVICES AND CONTROLS . driver window electrical door malfunctioned by getting stuck, intermittently. tt.0 person(s) were injured. 0 person(s) died.Mazda 626 1991 problem was reported in MARBURY, MD. Vehicle was not using Cruise Control. Mazda 626 1991 Service Brakes, Hydraulic Foundation Components Disc RotorMazda 626 1991 Service Brakes, Hydraulic Foundation Components Disc Rotor Review #977013 MAZDA 626 1991 car safety problem was reported on .MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:ROTOR . brakes on the car would not work properly had taken to the dealer after six months to find out about thin rotors which mazda did not fix. had problems braking..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22B3M5. Mazda 626 1991 problem was reported in FULLERTON, CA. Vehicle was not using Cruise Control. Mazda 626 1991 Seat BeltsMazda 626 1991 Seat Belts Review #978160 MAZDA 626 1991 car safety problem was reported on Jan 24, 1995.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SEAT BELTS . driver and passenger side automatic shoulder belts have stopped working. tt.0 person(s) were injured. 0 person(s) died.Mazda 626 1991 problem was reported in MAHTOMEAI, MN. Vehicle was not using Cruise Control. Mazda 626 1991 Seat Belts Review #978160 MAZDA 626 1991 car safety problem was reported on Jan 24, 1995.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SEAT BELTS . driver and passenger side automatic shoulder belts have stopped working. tt.0 person(s) were injured. 0 person(s) died.Mazda 626 1991 problem was reported in MAHTOMEAI, MN. Vehicle was not using Cruise Control. Mazda 626 1991 Seat Belts Review #978369 MAZDA 626 1991 car safety problem was reported on Jan 22, 1996.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SEAT BELTS . passenger side automatic shoulder belt has totally failed. tt.0 person(s) were injured. 0 person(s) died.Mazda 626 1991 problem was reported in SAPULPA, OK. Vehicle was not using Cruise Control. Mazda 626 1991 Seat Belts Front RetractorMazda 626 1991 Seat Belts Front Retractor Review #979306 MAZDA 626 1991 car safety problem was reported on Dec 01, 1995.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SEAT BELTS:FRONT:RETRACTOR . failure of the driver side seat belt retractor, belt will not retract. tt.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):JM1GD2229M1. Mazda 626 1991 problem was reported in JACKSON, FL. Vehicle was not using Cruise Control. Mazda 626 1991 Seat Belts Front Retractor Review #979306 MAZDA 626 1991 car safety problem was reported on Dec 01, 1995.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SEAT BELTS:FRONT:RETRACTOR . failure of the driver side seat belt retractor, belt will not retract. tt.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):JM1GD2229M1. Mazda 626 1991 problem was reported in JACKSON, FL. Vehicle was not using Cruise Control. Mazda 626 1991 Suspension FrontMazda 626 1991 Suspension Front Review #501661 MAZDA 626 1991 car safety problem was reported on Feb 16, 1996.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SUSPENSION:FRONT . vehicle shakes continously. *sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22B8M5. Mazda 626 1991 problem was reported in BRONX, NY. Vehicle was not using Cruise Control. Mazda 626 1991 Visibility Power Window Devices And ControlsMazda 626 1991 Visibility Power Window Devices And Controls Review #501661 MAZDA 626 1991 car safety problem was reported on Feb 16, 1996.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with VISIBILITY:POWER WINDOW DEVICES AND CONTROLS . driver's side window sticks. *sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22B8M5. Mazda 626 1991 problem was reported in BRONX, NY. Vehicle was not using Cruise Control. Mazda 626 1991 Latches/locks/linkages Doors LatchMazda 626 1991 Latches/locks/linkages Doors Latch Review #501661 MAZDA 626 1991 car safety problem was reported on Feb 16, 1996.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with LATCHES/LOCKS/LINKAGES:DOORS:LATCH . door locks inoperative. *sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22B8M5. Mazda 626 1991 problem was reported in BRONX, NY. Vehicle was not using Cruise Control. Mazda 626 1991 Power Train Automatic TransmissionMazda 626 1991 Power Train Automatic Transmission Review #501661 MAZDA 626 1991 car safety problem was reported on Feb 16, 1996.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . transmission failed. *sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22B8M5. Mazda 626 1991 problem was reported in BRONX, NY. Vehicle was not using Cruise Control. Mazda 626 1991 Structure Body Trunk LidMazda 626 1991 Structure Body Trunk Lid Review #501661 MAZDA 626 1991 car safety problem was reported on Feb 16, 1996.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with STRUCTURE:BODY:TRUNK LID . trunk leaks. *sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22B8M5. Mazda 626 1991 problem was reported in BRONX, NY. Vehicle was not using Cruise Control. Mazda 626 1991 Engine And Engine Cooling Engine GasolineMazda 626 1991 Engine And Engine Cooling Engine Gasoline Review #501661 MAZDA 626 1991 car safety problem was reported on Feb 16, 1996.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING:ENGINE:GASOLINE . intermittent stalling. *sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22B8M5. Mazda 626 1991 problem was reported in BRONX, NY. Vehicle was not using Cruise Control. Mazda 626 1991 Vehicle Speed ControlMazda 626 1991 Vehicle Speed Control Review #501661 MAZDA 626 1991 car safety problem was reported on Feb 16, 1996.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with VEHICLE SPEED CONTROL . sudden acceleration. *sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22B8M5. Mazda 626 1991 problem was reported in BRONX, NY. Vehicle was not using Cruise Control. Mazda 626 1991 Service Brakes, Hydraulic Foundation ComponentsMazda 626 1991 Service Brakes, Hydraulic Foundation Components Review #501661 MAZDA 626 1991 car safety problem was reported on Feb 16, 1996.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS . brakes failed. *sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22B8M5. Mazda 626 1991 problem was reported in BRONX, NY. Vehicle was not using Cruise Control. Mazda 626 1991 Seat BeltsMazda 626 1991 Seat Belts Review #601394 MAZDA 626 1991 car safety problem was reported on Apr 12, 1996.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SEAT BELTS . motorized seat belt broke, causing injury to passenger during accident. *sd.1 person(s) were injured. 0 person(s) died.Mazda 626 1991 problem was reported in VICTORIA, MN. Vehicle was not using Cruise Control. Mazda 626 1991 Engine And Engine Cooling Exhaust System Manifold/header/muffler/tail PipeMAZDA 626 1991 car safety problem was reported on Feb 16, 1996.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE . muffler replaced. *sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22B8M5. Mazda 626 1991 problem was reported in BRONX, NY. Vehicle was not using Cruise Control. Mazda 626 1991 Electrical SystemMazda 626 1991 Electrical System Review #501661 MAZDA 626 1991 car safety problem was reported on Feb 16, 1996.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with ELECTRICAL SYSTEM . no current for back lights. *sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22B8M5. Mazda 626 1991 problem was reported in BRONX, NY. Vehicle was not using Cruise Control. Mazda 626 1991 Engine And Engine Cooling Exhaust System Manifold/header/muffler/tail PipeMAZDA 626 1991 car safety problem was reported on Feb 16, 1996.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE . exhaust pipe replaced. *sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22B8M5. Mazda 626 1991 problem was reported in BRONX, NY. Vehicle was not using Cruise Control. Mazda 626 1991 Engine And Engine Cooling EngineMazda 626 1991 Engine And Engine Cooling Engine Review #501661 MAZDA 626 1991 car safety problem was reported on Feb 16, 1996.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING:ENGINE . timing belt broke. *sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22B8M5. Mazda 626 1991 problem was reported in BRONX, NY. Vehicle was not using Cruise Control. Mazda 626 1991 Engine And Engine Cooling Engine Review #487827 MAZDA 626 1991 car safety problem was reported on Nov 10, 1995.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING:ENGINE . cylinder head cracked. *dsh.0 person(s) were injured. 0 person(s) died.Mazda 626 1991 problem was reported in PALM HARBO, FL. Vehicle was not using Cruise Control. Mazda 626 1991 Seat BeltsMazda 626 1991 Seat Belts Review #506301 MAZDA 626 1991 car safety problem was reported on July 05, 1996.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SEAT BELTS . driver's side motorized seat belt locks in the open position, leaving driver unsecured. *sd.0 person(s) were injured. 0 person(s) died.Mazda 626 1991 problem was reported in MOHNTON, PA. Vehicle was not using Cruise Control. Mazda 626 1991 Vehicle Speed ControlMazda 626 1991 Vehicle Speed Control Review #987156 MAZDA 626 1991 car safety problem was reported on .MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with VEHICLE SPEED CONTROL . while driving, the vehicle suddenly accelerates. please describe. *ak.0 person(s) were injured. 0 person(s) died.Mazda 626 1991 problem was reported in EAGAN, MN. Vehicle was not using Cruise Control. Mazda 626 1991 Seat BeltsMazda 626 1991 Seat Belts Review #507384 MAZDA 626 1991 car safety problem was reported on .MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SEAT BELTS . driver's and passenger's automatic seat belts fail to open/close. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22B2M1. Mazda 626 1991 problem was reported in INVERNESS, FL. Original Owner. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Mazda 626 1991 drive type:FWD. FUEL TYPE: GAS. Mazda 626 1991 Seat Belts Review #512980 MAZDA 626 1991 car safety problem was reported on June 01, 1994.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SEAT BELTS . motorized seat belt works intermittently..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22B6M5. Mazda 626 1991 problem was reported in FORT WORTH, TX. Original Owner. Vehicle was purchased on July 27, 1991. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Mazda 626 1991 drive type:FWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Mazda 626 1991 TRANSMISSION TYPE: MAN . Mazda 626 1991 Seat Belts Review #546592 MAZDA 626 1991 car safety problem was reported on .MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SEAT BELTS . driver and passenger side motorized seat belt restraint continously fails to operate..Vehicle Identification Number (VIN):1YVGD22B1M5. Mazda 626 1991 problem was reported in COUNCIL BL, IA. Vehicle was purchased on Sept 01, 1996. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Mazda 626 1991 drive type:FWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Mazda 626 1991 Seat Belts Review #810116 MAZDA 626 1991 car safety problem was reported on .MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SEAT BELTS . upon opening the door, the driver's and passenger's automatic shoulder belts do not retract. *ak.Mazda 626 1991 problem was reported in COLUMBUS, OH. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Mazda 626 1991 Service Brakes, Hydraulic AntilockMazda 626 1991 Service Brakes, Hydraulic Antilock Review #811810 MAZDA 626 1991 car safety problem was reported on Mar 15, 1997.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES, HYDRAULIC:ANTILOCK . crack in anti-lock braking system caused brake fluid leakage in control unit cylinder; brakes inoperative, according to dealer, not repairable. *ak.Vehicle Identification Number (VIN):JM1GD2423M1. Mazda 626 1991 problem was reported in COLUMBUS, OH. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Mazda 626 1991 Suspension FrontMazda 626 1991 Suspension Front Review #812663 MAZDA 626 1991 car safety problem was reported on May 28, 1997.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SUSPENSION:FRONT . consumer has replaced strut, mountings and bearings of front left suspension at 1800 miles, at 2200 miles the front right side has to be repaired. consumer took vehicle to cook buick mazda in arlington heights, phone number is 847-253-2100. *ak.Vehicle Identification Number (VIN):1YVGD22B9M5. Mazda 626 1991 problem was reported in ARLINGTON HEIGHTS, IL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 30 mph. Mazda 626 1991 Steering Hydraulic Power Assist SystemMazda 626 1991 Steering Hydraulic Power Assist System Review #516576 MAZDA 626 1991 car safety problem was reported on Nov 25, 1995.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with STEERING:HYDRAULIC POWER ASSIST SYSTEM . while traveling on a two-lane icy road oncoming 1979 dodge lost control entered lane where mazda was going, causing head-on crash, resulting in severe injuries to both driver and front passenger . also 3-week old infant suffered fractured skull and seizures due to car seat detaching from its base upon frontal collision. *ak.Vehicle was involved in a crash. 3 person(s) were injured. Mazda 626 1991 problem was reported in VICTORIA, MN. Accident was reported to Police. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Mazda 626 1991 Child Seat Base (infant)Mazda 626 1991 Child Seat Base (infant) Review #516576 MAZDA 626 1991 car safety problem was reported on Nov 25, 1995.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with CHILD SEAT:BASE (INFANT) . while traveling on a two-lane icy road oncoming 1979 dodge lost control entered lane where mazda was going, causing head-on crash, resulting in severe injuries to both driver and front passenger . also 3-week old infant suffered fractured skull and seizures due to car seat detaching from its base upon frontal collision. *ak.Vehicle was involved in a crash. 3 person(s) were injured. Mazda 626 1991 problem was reported in VICTORIA, MN. Accident was reported to Police. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Mazda 626 1991 Seat BeltsMazda 626 1991 Seat Belts Review #816672 MAZDA 626 1991 car safety problem was reported on Sept 17, 1997.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SEAT BELTS . consumer's motorized driver side shoulder belt does not work. there is no traction when door opens, nor when closing. *ak the driver side belt does not operate automatically. this is a serious safety deffect. *yh .Vehicle Identification Number (VIN):1YVGD22B4M5. Mazda 626 1991 problem was reported in PACIFICA, CA. Vehicle was purchased on Sept 14, 1997. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Mazda 626 1991 drive type:FWD. FUEL TYPE: GAS. Mazda 626 1991 TRANSMISSION TYPE: MAN . Mazda 626 1991 Steering Rack And Pinion RackMazda 626 1991 Steering Rack And Pinion Rack Review #533971 MAZDA 626 1991 car safety problem was reported on Apr 01, 1996.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with STEERING:RACK AND PINION:RACK . power steering rack leaked/failed twice. first time replaced by dealer uner waranty. dealer refuses to replace second time. *ak.Vehicle Identification Number (VIN):1YVGD22B3M5. Mazda 626 1991 problem was reported in MADISON, WI. Vehicle was purchased on July 14, 1991. Vehicle was not using Cruise Control. Mazda 626 1991 drive type:FWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Mazda 626 1991 Steering Rack And Pinion Rack Review #533971 MAZDA 626 1991 car safety problem was reported on Apr 01, 1996.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with STEERING:RACK AND PINION:RACK . power steering rack leaked/failed twice. first time replaced by dealer uner waranty. dealer refuses to replace second time. *ak.Vehicle Identification Number (VIN):1YVGD22B3M5. Mazda 626 1991 problem was reported in MADISON, WI. Vehicle was purchased on July 14, 1991. Vehicle was not using Cruise Control. Mazda 626 1991 drive type:FWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Mazda 626 1991 Power Train Automatic TransmissionMazda 626 1991 Power Train Automatic Transmission Review #535474 MAZDA 626 1991 car safety problem was reported on .MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . transmission failed..0 person(s) were injured. 0 person(s) died.Mazda 626 1991 problem was reported in STOCKTON, CA. Vehicle was purchased on Sept 15, 1991. Vehicle was using Cruise Control.Mazda 626 1991 drive type:FWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Mazda 626 1991 TRANSMISSION TYPE: AUTO. Mazda 626 1991 Seat Belts Front WebbingMazda 626 1991 Seat Belts Front Webbing Review #536398 MAZDA 626 1991 car safety problem was reported on Mar 01, 1997.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SEAT BELTS:FRONT:WEBBING . the motorized seat belt stick in the open and closed positions..Vehicle Identification Number (VIN):1YVGD22B2M5. Mazda 626 1991 problem was reported in COLUMBUS, OH. Vehicle was purchased on Jan 31, 1994. Vehicle was using Cruise Control.Mazda 626 1991 drive type:FWD. FUEL TYPE: GAS. Mazda 626 1991 Seat Belts Front AnchorageMazda 626 1991 Seat Belts Front Anchorage Review #537534 MAZDA 626 1991 car safety problem was reported on May 14, 1998.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SEAT BELTS:FRONT:ANCHORAGE . driver's motorized seat belt did not restrain driver in an accident. driver struck the steering wheel and bent it causing injuries to his chest and knees..1 person(s) were injured. Vehicle Identification Number (VIN):JM1GD2225M1. Mazda 626 1991 problem was reported in MOHNTON, PA. Accident was reported to Police. Original Owner. Vehicle was purchased on Apr 01, 1991. Vehicle was using Cruise Control.Mazda 626 1991 drive type:FWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. VEHICLE SPEED: 30 mph. Mazda 626 1991 Seat Belts Front Review #831585 MAZDA 626 1991 car safety problem was reported on July 12, 1997.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SEAT BELTS:FRONT . front seat belt doesn't work automatically when getting into the vehicle, and having to put the seat belt around driver's body. the consumer is also having problem with the reverse lights and other lights. they come on and off whenever they want to, and the consumer can't find the problem. the brake system has also caused problems. *ak *ml.Vehicle Identification Number (VIN):1YBGD22B6M5. Mazda 626 1991 problem was reported in NEW ROCSHEL, NY. Vehicle was purchased on Jan 25, 1991. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Mazda 626 1991 drive type:FWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Mazda 626 1991 TRANSMISSION TYPE: AUTO. Mazda 626 1991 Service Brakes, HydraulicMazda 626 1991 Service Brakes, Hydraulic Review #831585 MAZDA 626 1991 car safety problem was reported on July 12, 1997.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES, HYDRAULIC . front seat belt doesn't work automatically when getting into the vehicle, and having to put the seat belt around driver's body. the consumer is also having problem with the reverse lights and other lights. they come on and off whenever they want to, and the consumer can't find the problem. the brake system has also caused problems. *ak *ml.Vehicle Identification Number (VIN):1YBGD22B6M5. Mazda 626 1991 problem was reported in NEW ROCSHEL, NY. Vehicle was purchased on Jan 25, 1991. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Mazda 626 1991 drive type:FWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Mazda 626 1991 TRANSMISSION TYPE: AUTO. Mazda 626 1991 Exterior LightingMazda 626 1991 Exterior Lighting Review #831585 MAZDA 626 1991 car safety problem was reported on July 12, 1997.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with EXTERIOR LIGHTING . front seat belt doesn't work automatically when getting into the vehicle, and having to put the seat belt around driver's body. the consumer is also having problem with the reverse lights and other lights. they come on and off whenever they want to, and the consumer can't find the problem. the brake system has also caused problems. *ak *ml.Vehicle Identification Number (VIN):1YBGD22B6M5. Mazda 626 1991 problem was reported in NEW ROCSHEL, NY. Vehicle was purchased on Jan 25, 1991. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Mazda 626 1991 drive type:FWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Mazda 626 1991 TRANSMISSION TYPE: AUTO. Mazda 626 1991 Seat Belts Front Buckle AssemblyMazda 626 1991 Seat Belts Front Buckle Assembly Review #826454 MAZDA 626 1991 car safety problem was reported on Aug 08, 1998.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SEAT BELTS:FRONT:BUCKLE ASSEMBLY . the seat belt buckle on the passenger's seat released from the seat belt webbing, causing the shoulder belt to become inoperable. cause unknown. please give any further details. *ak .Vehicle Identification Number (VIN):1YUGD22B6M5. Mazda 626 1991 problem was reported in BROOKLYN, NY. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Mazda 626 1991 drive type:FWD. FUEL TYPE: GAS. Mazda 626 1991 TRANSMISSION TYPE: AUTO. Mazda 626 1991 Seat Belts Front AnchorageMazda 626 1991 Seat Belts Front Anchorage Review #704452 MAZDA 626 1991 car safety problem was reported on .MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SEAT BELTS:FRONT:ANCHORAGE . driver-side motorized seatbelt fails to operate consistently. on occasion, the shoulder belt remains in the rearward position until the door is closed and opened again..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22B9M5. Mazda 626 1991 problem was reported in CHADDS FORD, PA. Vehicle was purchased on Dec 01, 1994. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Mazda 626 1991 drive type:FWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Mazda 626 1991 Structure Body DoorMazda 626 1991 Structure Body Door Review #829554 MAZDA 626 1991 car safety problem was reported on Oct 08, 1998.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with STRUCTURE:BODY:DOOR . passenger's outside door handle broke. also, drivers inside door handle broke, causing the consumer problems with getting in and out of vehicle. dealer has not been contacted. *ak.Vehicle Identification Number (VIN):NOT AVALIBL. Mazda 626 1991 problem was reported in TULARE, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Mazda 626 1991 Structure Body Door Review #829554 MAZDA 626 1991 car safety problem was reported on Oct 08, 1998.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with STRUCTURE:BODY:DOOR . passenger's outside door handle broke. also, drivers inside door handle broke, causing the consumer problems with getting in and out of vehicle. dealer has not been contacted. *ak.Vehicle Identification Number (VIN):NOT AVALIBL. Mazda 626 1991 problem was reported in TULARE, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Mazda 626 1991 Seat BeltsMazda 626 1991 Seat Belts Review #706916 MAZDA 626 1991 car safety problem was reported on June 01, 1998.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SEAT BELTS . seat belt is automatic, however it does not engage when the door is closed unless you re-open it and slam the door shut. sometimes even that does not work. has become a bit of a hassle as this occurs just about every time i use the vehicle, this being up to 3 hours a day. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22B6M5. Mazda 626 1991 problem was reported in LOUISVILLE, KY. Vehicle was purchased on Mar 01, 1997. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Mazda 626 1991 drive type:FWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph. Mazda 626 1991 Service Brakes, Hydraulic AntilockMazda 626 1991 Service Brakes, Hydraulic Antilock Review #847234 MAZDA 626 1991 car safety problem was reported on Jan 01, 1999.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES, HYDRAULIC:ANTILOCK . when driving at 55 mph and applying the brakes they went straight to the floorboard, and there is some type of knocking noise and tapping noise coming from the vehicle. *ak.Vehicle Identification Number (VIN):1YVGD22B2M5. Mazda 626 1991 problem was reported in NEW IBERIA, LA. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Mazda 626 1991 Suspension FrontMazda 626 1991 Suspension Front Review #847234 MAZDA 626 1991 car safety problem was reported on Jan 01, 1999.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SUSPENSION:FRONT . when driving at 55 mph and applying the brakes they went straight to the floorboard, and there is some type of knocking noise and tapping noise coming from the vehicle. *ak.Vehicle Identification Number (VIN):1YVGD22B2M5. Mazda 626 1991 problem was reported in NEW IBERIA, LA. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Mazda 626 1991 Seat BeltsMazda 626 1991 Seat Belts Review #719816 MAZDA 626 1991 car safety problem was reported on June 01, 1999.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SEAT BELTS . automatic seat belts do not engage. *ak.Vehicle Identification Number (VIN):1YVGD22B5M5. Mazda 626 1991 problem was reported in ALBUQUERQUE, NM. Original Owner. Vehicle was purchased on May 01, 1991. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Mazda 626 1991 drive type:FWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph. Mazda 626 1991 Suspension Front Macpherson StrutMazda 626 1991 Suspension Front Macpherson Strut Review #858676 MAZDA 626 1991 car safety problem was reported on Mar 13, 2000.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SUSPENSION:FRONT:MACPHERSON STRUT . while making a turn at highway speeds front end started to make a loud noise, the struts cracked. dealer has been notified. *ak.Vehicle Identification Number (VIN):1YVGD22B0M5. Mazda 626 1991 problem was reported in SAN ANTONIO, TX. Original Owner. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Mazda 626 1991 Latches/locks/linkages Doors LatchMazda 626 1991 Latches/locks/linkages Doors Latch Review #861767 MAZDA 626 1991 car safety problem was reported on .MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with LATCHES/LOCKS/LINKAGES:DOORS:LATCH . driver's rear side door has jammed. occupants have to exit on the opposite side. *ak.Vehicle Identification Number (VIN):1YVGD22B8M5. Mazda 626 1991 problem was reported in MISSOURI CITY, TX. Original Owner. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Mazda 626 1991 Seat BeltsMazda 626 1991 Seat Belts Review #868588 MAZDA 626 1991 car safety problem was reported on .MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SEAT BELTS . automatic seat belt motor has malfunctioned causing seat belts to become inoperable. please give any further details.*ak.Mazda 626 1991 problem was reported in DURHAM, NC. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Mazda 626 1991 Service Brakes, Hydraulic Foundation ComponentsMazda 626 1991 Service Brakes, Hydraulic Foundation Components Review #882761 MAZDA 626 1991 car safety problem was reported on .MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS . when driving at 45-50 mph and attempting to make a graudal stop brake pedal went to floorboard, causing extended stopping distance. vehicle skidded one hundred feet, causing a rearend collision. consumer also, vehicle was totaled. please provide any further details.*ak.Vehicle Identification Number (VIN):1YVGD22B1M5. Mazda 626 1991 problem was reported in DUNCAN, SC. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Mazda 626 1991 Seat BeltsMazda 626 1991 Seat Belts Review #884833 MAZDA 626 1991 car safety problem was reported on Apr 01, 2001.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SEAT BELTS . right side front seat belt is inoperable due to a malfunction motor. *ak.Vehicle Identification Number (VIN):1YVGD22R6M5. Mazda 626 1991 problem was reported in WALNUT CREEK, CA. Original Owner. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.FUEL TYPE: GAS. Mazda 626 1991 TRANSMISSION TYPE: AUTO. Mazda 626 1991 Seat Belts Review #885108 MAZDA 626 1991 car safety problem was reported on .MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SEAT BELTS . passenger's seat belt is inoperable due to a malfunction within motor. please give any further details.*ak.Vehicle Identification Number (VIN):1YVGD22B6M5. Mazda 626 1991 problem was reported in WALNUT CREEK, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Mazda 626 1991 Power Train Automatic TransmissionMazda 626 1991 Power Train Automatic Transmission Review #891198 MAZDA 626 1991 car safety problem was reported on June 04, 2001.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . vehicle was going 70-75mph in 5th gear and suddenly downshifted to 1st gear and locked up. no warning was indicated. speedometer wasn't working at the time. consumer has not yet contacted dealer. consumer please add vin# and mileage.*ak.Vehicle Identification Number (VIN):NOT AVAILAB. Mazda 626 1991 problem was reported in WAYNESVILLE, GA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. FUEL TYPE: GAS. Mazda 626 1991 TRANSMISSION TYPE: AUTO. Mazda 626 1991 Power Train Review #891198 MAZDA 626 1991 car safety problem was reported on June 04, 2001.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN . vehicle was going 70-75mph in 5th gear and suddenly downshifted to 1st gear and locked up. no warning was indicated. speedometer wasn't working at the time. consumer has not yet contacted dealer. consumer please add vin# and mileage.*ak.Vehicle Identification Number (VIN):NOT AVAILAB. Mazda 626 1991 problem was reported in WAYNESVILLE, GA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. FUEL TYPE: GAS. Mazda 626 1991 TRANSMISSION TYPE: AUTO. Mazda 626 1991 Visibility Power Window Devices And ControlsMazda 626 1991 Visibility Power Window Devices And Controls Review #896016 MAZDA 626 1991 car safety problem was reported on Sept 07, 2000.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with VISIBILITY:POWER WINDOW DEVICES AND CONTROLS . driver's side door will not open. had to enter vehicle through passenger's side door. passenger's side door won't open from the inside or outside. please provide any further information.*ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22B7M5. Mazda 626 1991 problem was reported in POVLAN, GA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph. Mazda 626 1991 Power Train Automatic TransmissionMazda 626 1991 Power Train Automatic Transmission Review #759225 MAZDA 626 1991 car safety problem was reported on Jan 03, 2002.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . transmission failed at 112000 miles. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1YVGD22B2M5. Mazda 626 1991 problem was reported in NEW KNOXVILLE, OH. Vehicle was purchased on Nov 01, 1994. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Mazda 626 1991 drive type:FWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Mazda 626 1991 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 30 mph. Mazda 626 1991 Seat Belts Front AnchorageMazda 626 1991 Seat Belts Front Anchorage Review #8020082 MAZDA 626 1991 car safety problem was reported on Sept 15, 2002.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SEAT BELTS:FRONT:ANCHORAGE . consumer states that the front seat belts will not retract . dealer notified repaired and replace and 4 months later they both broke again. nlm.Vehicle Identification Number (VIN):PLEASE PROV. Mazda 626 1991 problem was reported in KINGSPORT, TN. Original Owner. Vehicle was not using Cruise Control. Mazda 626 1991 Power Train Automatic TransmissionMazda 626 1991 Power Train Automatic Transmission Review #10024180 MAZDA 626 1991 car safety problem was reported on June 16, 2003.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . while traveling on te highway without prior warning a flashing light appeared on the dashboard, overdrive light on/off, causing the vehicle to jerk.*ak.Mazda 626 1991 problem was reported in PLYMOUTH, MN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Mazda 626 1991 Power Train Automatic Transmission Review #10029079 MAZDA 626 1991 car safety problem was reported on July 23, 2003.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . while driving home from work, the car was going pretty slowly. when i pressed the gas more, it didn't seem to help. it slowed to a crawl then stopped. the transmission just decided to stop. this is on a mazda 626. there were no other indications of the failure and now i have to get a new transmission!*ak.0 person(s) were injured. 0 person(s) died.Mileage was 162000 miles. Vehicle Identification Number (VIN):1YVGD22B2L5. Mazda 626 1991 problem was reported in FREEPORT, PA. Vehicle was purchased on July 18, 2003. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda 626 1991 drive type:U. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda 626 1991 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 2 mph. Mazda 626 1991 Power Train Automatic Transmission Review #10047114 MAZDA 626 1991 car safety problem was reported on Nov 17, 2003.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . transmission lost reverse. *la.0 person(s) were injured. 0 person(s) died.Mileage was 195222 miles. Vehicle Identification Number (VIN):1YVGD22B8M5. Mazda 626 1991 problem was reported in ATWATER, MN. Vehicle was purchased on Nov 10, 2003. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. Mazda 626 1991 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph. Mazda 626 1991 Latches/locks/linkages Doors LatchMazda 626 1991 Latches/locks/linkages Doors Latch Review #10059747 MAZDA 626 1991 car safety problem was reported on Feb 23, 2004.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with LATCHES/LOCKS/LINKAGES:DOORS:LATCH . front driver's side door did not open. vehicle was taken to dealership, where the mechanic replaced the door latch. *ak.Mileage was 117000 miles. Vehicle Identification Number (VIN):1YVGD22B4M5. Mazda 626 1991 problem was reported in SAN FRANCISCO, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Mazda 626 1991 TRANSMISSION TYPE: AUTO. Mazda 626 1991 Power Train Automatic TransmissionMazda 626 1991 Power Train Automatic Transmission Review #10066208 MAZDA 626 1991 car safety problem was reported on Apr 07, 2004.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . automatic transmission slipping. *ak.Mileage was 145000 miles. Vehicle Identification Number (VIN):1YVGD22B4M5. Mazda 626 1991 problem was reported in SANTA CRUZ, CA. Vehicle was purchased on Mar 01, 1991. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Vehicle had 4 CYLINDERS. Mazda 626 1991 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda 626 1991 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 50 mph. Mazda 626 1991 Unknown Or OtherMazda 626 1991 Unknown Or Other Review #10069729 MAZDA 626 1991 car safety problem was reported on Nov 15, 2003.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with UNKNOWN OR OTHER . i bought this car at this dealership on 1-9-03,since i have had this car i have only driven it a couple of times to date. this car has major front end problems,the axel is broken, the transmission is slipping,it is terribly out of alignment,the cable shifter is out and the car stops on me while im driving in traffic. i have tried to tell the owner of the dealership and he tells me it's just my imagination....he got angry after i called him so much two weeks ago that he told me to bring the car in so he can look at it,i did and he then said he needed to send it away to have it looked at by other mechanics.....he kept my car for 8 days than brought it back and said no one could find anything wrong with it and that it had been put on a diagnostic machine,i said fine and could i see the paperwork to that effect .....he refused and said he didn't have to because it was his paperwork,i didn't understand because to me if it had really been checked why shouldn't i be able to see exactly what they found?. this dealership has had three complaints against it in the past 36 months from the bbb. you may not be able to help me but please investigate this place.....they're selling cars that are unsafe and getting away with it,i have called the city of antioch and explained my position to them....some one has to be responsible for a business like this being in existence,and someone will have to answer if death or injury occur because this man was allowed to sell these unsafe cars. .Mileage was 0 miles. Vehicle Identification Number (VIN):JM1GD222XM1. Mazda 626 1991 problem was reported in BAY POINT, CA. Vehicle was not using Cruise Control. Mazda 626 1991 TRANSMISSION TYPE: AUTO. Mazda 626 1991 Power TrainMazda 626 1991 Power Train Review #10069729 MAZDA 626 1991 car safety problem was reported on Nov 15, 2003.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN . i bought this car at this dealership on 1-9-03,since i have had this car i have only driven it a couple of times to date. this car has major front end problems,the axel is broken, the transmission is slipping,it is terribly out of alignment,the cable shifter is out and the car stops on me while im driving in traffic. i have tried to tell the owner of the dealership and he tells me it's just my imagination....he got angry after i called him so much two weeks ago that he told me to bring the car in so he can look at it,i did and he then said he needed to send it away to have it looked at by other mechanics.....he kept my car for 8 days than brought it back and said no one could find anything wrong with it and that it had been put on a diagnostic machine,i said fine and could i see the paperwork to that effect .....he refused and said he didn't have to because it was his paperwork,i didn't understand because to me if it had really been checked why shouldn't i be able to see exactly what they found?. this dealership has had three complaints against it in the past 36 months from the bbb. you may not be able to help me but please investigate this place.....they're selling cars that are unsafe and getting away with it,i have called the city of antioch and explained my position to them....some one has to be responsible for a business like this being in existence,and someone will have to answer if death or injury occur because this man was allowed to sell these unsafe cars. .Mileage was 0 miles. Vehicle Identification Number (VIN):JM1GD222XM1. Mazda 626 1991 problem was reported in BAY POINT, CA. Vehicle was not using Cruise Control. Mazda 626 1991 TRANSMISSION TYPE: AUTO. Mazda 626 1991 SteeringMazda 626 1991 Steering Review #10069729 MAZDA 626 1991 car safety problem was reported on Nov 15, 2003.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with STEERING . i bought this car at this dealership on 1-9-03,since i have had this car i have only driven it a couple of times to date. this car has major front end problems,the axel is broken, the transmission is slipping,it is terribly out of alignment,the cable shifter is out and the car stops on me while im driving in traffic. i have tried to tell the owner of the dealership and he tells me it's just my imagination....he got angry after i called him so much two weeks ago that he told me to bring the car in so he can look at it,i did and he then said he needed to send it away to have it looked at by other mechanics.....he kept my car for 8 days than brought it back and said no one could find anything wrong with it and that it had been put on a diagnostic machine,i said fine and could i see the paperwork to that effect .....he refused and said he didn't have to because it was his paperwork,i didn't understand because to me if it had really been checked why shouldn't i be able to see exactly what they found?. this dealership has had three complaints against it in the past 36 months from the bbb. you may not be able to help me but please investigate this place.....they're selling cars that are unsafe and getting away with it,i have called the city of antioch and explained my position to them....some one has to be responsible for a business like this being in existence,and someone will have to answer if death or injury occur because this man was allowed to sell these unsafe cars. .Mileage was 0 miles. Vehicle Identification Number (VIN):JM1GD222XM1. Mazda 626 1991 problem was reported in BAY POINT, CA. Vehicle was not using Cruise Control. Mazda 626 1991 TRANSMISSION TYPE: AUTO. Mazda 626 1991 Engine And Engine CoolingMazda 626 1991 Engine And Engine Cooling Review #10069729 MAZDA 626 1991 car safety problem was reported on Nov 15, 2003.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with ENGINE AND ENGINE COOLING . i bought this car at this dealership on 1-9-03,since i have had this car i have only driven it a couple of times to date. this car has major front end problems,the axel is broken, the transmission is slipping,it is terribly out of alignment,the cable shifter is out and the car stops on me while im driving in traffic. i have tried to tell the owner of the dealership and he tells me it's just my imagination....he got angry after i called him so much two weeks ago that he told me to bring the car in so he can look at it,i did and he then said he needed to send it away to have it looked at by other mechanics.....he kept my car for 8 days than brought it back and said no one could find anything wrong with it and that it had been put on a diagnostic machine,i said fine and could i see the paperwork to that effect .....he refused and said he didn't have to because it was his paperwork,i didn't understand because to me if it had really been checked why shouldn't i be able to see exactly what they found?. this dealership has had three complaints against it in the past 36 months from the bbb. you may not be able to help me but please investigate this place.....they're selling cars that are unsafe and getting away with it,i have called the city of antioch and explained my position to them....some one has to be responsible for a business like this being in existence,and someone will have to answer if death or injury occur because this man was allowed to sell these unsafe cars. .Mileage was 0 miles. Vehicle Identification Number (VIN):JM1GD222XM1. Mazda 626 1991 problem was reported in BAY POINT, CA. Vehicle was not using Cruise Control. Mazda 626 1991 TRANSMISSION TYPE: AUTO. Mazda 626 1991 Vehicle Speed Control Accelerator PedalMazda 626 1991 Vehicle Speed Control Accelerator Pedal Review #10073528 MAZDA 626 1991 car safety problem was reported on May 04, 2004.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with VEHICLE SPEED CONTROL:ACCELERATOR PEDAL . when putting the vehicle in drive it surged forward. this caused the consumer to lose control of the vehicle, and hit a building head on. consumer stated that the accelerator pedal was stuck to the floorboard. consumer had the vehicle towed to the dealership. *ak.Vehicle was involved in a crash. 1 person(s) were injured. Mazda 626 1991 problem was reported in DETROIT, MI. Accident was reported to Police. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Mazda 626 1991 Seats Front Assembly Power AdjustMazda 626 1991 Seats Front Assembly Power Adjust Review #10094401 MAZDA 626 1991 car safety problem was reported on Sept 13, 2004.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with SEATS:FRONT ASSEMBLY:POWER ADJUST . power adjusted seat stuck, making it impossible for consumer to adjust the seat as needed. dealership was notified,but did not resolve the problem. *ak.Mileage was 110000 miles. Vehicle Identification Number (VIN):1YVGD22B3M5. Mazda 626 1991 problem was reported in MINNEAPOLIS, MN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Mazda 626 1991 Power Train Automatic TransmissionMazda 626 1991 Power Train Automatic Transmission Review #10198418 MAZDA 626 1991 car safety problem was reported on July 03, 2007.MAZDA 626 1991, manufactured by MAZDA MOTOR CORP had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . tl*the contact owns a 1991 mazda 626. he stated that there was a leak coming from the front of the transmission. approximately a year ago, the transmission failed and he had it rebuilt. the mechanic stated that he would need to purchase a new transmission. the failure mileage was 112,000 and the current mileage 124,000..0 person(s) were injured. 0 person(s) died.Mileage was 112000 miles. Vehicle Identification Number (VIN):1YVGD22B8M5. Mazda 626 1991 problem was reported in INGLEWOOD, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 4 CYLINDERS. Mazda 626 1991 drive type:U. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Mazda 626 1991 TRANSMISSION TYPE: AUTO. |
-
Mazda 626 1991 Forum
Discuss and Report Mazda 626 Problems -
Service Bulletins
View Recent Mazda 626 1991 repair guidance -
Recalls
Latest recall and safety Mazda 626 1991 information
Mazda 626 1991 Systems
Search 1000s of Car Reviews, Recalls and Technical Bulletins
Start by entering a car model, system, manufacturer or any combination of keywords.
Mazda 626 1991 Reports
My 2001 626 transmission slips slightly when first put it into drive from park then bucks. After it engages it shifts fine I have a 1998 Mazda Protege LX Touring Edition (4dr) and need to install a rear-facing infant car seat (with base) in the back seat, preferably center position. Because I purchased my Mazda used, I do not have the Owner's Manual. I was told th question is whiseling noise when take off Sorry the question is for Tribute 2010 for whiseling noise when taking off Today I backed up in a narrow parking lot and as I put my 2009 Mazda 6 in drive and with my foot still on the brake the car accelrated unexpectedly over about 10 feet and into a building, the engine revving and smoking as I put it in neutral and t mazda3 2007 radio fuse location my alt light came on and stayed so i disconnected the battery to see if the car would sat running and now both headlaights burnt out the tach is in op no and the air bag lamp stays on all the time what happened? 94 mazda 626 air bag ligt stays on after alt burnt out what is the problem I REALLY THINK I HAVE THE ANSWER, I HOPE. I have an 2002 Mazda tribute it stalls especially in hot weather. The manual says very little, but it said it may be a vapor lock. My car was parked inside a humid garage so when it stalls on me seas Another really difficult thing to diagnose was the engine light, and warning bell sounding off for a yr. the dealer ship misdiagnosed the problem. Charged me for a diagnostic test they did not do. They sold me a battery, and sent me down the r I can't find my Satellitte Radio Number, it appeared originally on my NAV Screen when I would depress the SAT button. It no longer appears. I don't know if that's a malfunction. i have a 2002 millenia , would a 1998 automtic transmission work for car, denny.koch@insightbb.com
I have a 2008 Mazda CX-9 Grand touring with the Navigation touch s