Car-and-Safety.com
Mazda 323 1991 Safety Reports and Reviews
Mazda 323 1991 Reviews
Mazda 323 1991 Suspension Front Wheel BearingMazda 323 1991 Suspension Front Wheel Bearing Review #480946 MAZDA 323 1991 car safety problem was reported on Jan 20, 1995.MAZDA 323 1991, manufactured by MAZDA NORTH AMERICAN OPERATIONS had a problem with SUSPENSION:FRONT:WHEEL BEARING . wheel bearing failed, causing front end noise/dragging, also doors drag when parking vehicle on uneven surface. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):JM1BG2329M0. Mazda 323 1991 problem was reported in STRASBURG, VA. Vehicle was not using Cruise Control. Mazda 323 1991 Seat Belts Front Warning Light/devicesMazda 323 1991 Seat Belts Front Warning Light/devices Review #964313 MAZDA 323 1991 car safety problem was reported on Apr 25, 1995.MAZDA 323 1991, manufactured by MAZDA NORTH AMERICAN OPERATIONS had a problem with SEAT BELTS:FRONT:WARNING LIGHT/DEVICES . warning light goes on when seatbelt is latched. please explain. tt.0 person(s) were injured. 0 person(s) died.Mazda 323 1991 problem was reported in KISSIMMEE, FL. Vehicle was not using Cruise Control. Mazda 323 1991 Seat Belts Front Buckle AssemblyMazda 323 1991 Seat Belts Front Buckle Assembly Review #965829 MAZDA 323 1991 car safety problem was reported on .MAZDA 323 1991, manufactured by MAZDA NORTH AMERICAN OPERATIONS had a problem with SEAT BELTS:FRONT:BUCKLE ASSEMBLY . the passenger side seat belt buckle will not lock. tt.0 person(s) were injured. 0 person(s) died.Mazda 323 1991 problem was reported in OCCIDENTAL, CA. Vehicle was not using Cruise Control. Mazda 323 1991 Seat Belts Front Buckle Assembly Review #966383 MAZDA 323 1991 car safety problem was reported on May 01, 1993.MAZDA 323 1991, manufactured by MAZDA NORTH AMERICAN OPERATIONS had a problem with SEAT BELTS:FRONT:BUCKLE ASSEMBLY . the middle backseat and drivers seatbelt have been jamming on and off for awhile. the automatic seatbelt stops on the track. please describe. tt.0 person(s) were injured. 0 person(s) died.Mazda 323 1991 problem was reported in DENVER, CO. Vehicle was not using Cruise Control. Mazda 323 1991 Seat Belts Review #966383 MAZDA 323 1991 car safety problem was reported on May 01, 1993.MAZDA 323 1991, manufactured by MAZDA NORTH AMERICAN OPERATIONS had a problem with SEAT BELTS . the middle backseat and drivers seatbelt have been jamming on and off for awhile. the automatic seatbelt stops on the track. please describe. tt.0 person(s) were injured. 0 person(s) died.Mazda 323 1991 problem was reported in DENVER, CO. Vehicle was not using Cruise Control. Mazda 323 1991 Seat Belts Review #966715 MAZDA 323 1991 car safety problem was reported on Oct 01, 1994.MAZDA 323 1991, manufactured by MAZDA NORTH AMERICAN OPERATIONS had a problem with SEAT BELTS . automatic seat belt failure, motor on seat belt does not work. tt.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):JM1BG2322M0. Mazda 323 1991 problem was reported in DENVER, CO. Vehicle was not using Cruise Control. Mazda 323 1991 Seat Belts Front RetractorMazda 323 1991 Seat Belts Front Retractor Review #980518 MAZDA 323 1991 car safety problem was reported on Jan 01, 1996.MAZDA 323 1991, manufactured by MAZDA NORTH AMERICAN OPERATIONS had a problem with SEAT BELTS:FRONT:RETRACTOR . passenger and driver side lap/shoulder will not retract properly. *ak.0 person(s) were injured. 0 person(s) died.Mazda 323 1991 problem was reported in GALESFERRY, CT. Vehicle was not using Cruise Control. Mazda 323 1991 Seat Belts Front Retractor Review #980518 MAZDA 323 1991 car safety problem was reported on Jan 01, 1996.MAZDA 323 1991, manufactured by MAZDA NORTH AMERICAN OPERATIONS had a problem with SEAT BELTS:FRONT:RETRACTOR . passenger and driver side lap/shoulder will not retract properly. *ak.0 person(s) were injured. 0 person(s) died.Mazda 323 1991 problem was reported in GALESFERRY, CT. Vehicle was not using Cruise Control. Mazda 323 1991 Seat Belts Review #505086 MAZDA 323 1991 car safety problem was reported on May 05, 1996.MAZDA 323 1991, manufactured by MAZDA NORTH AMERICAN OPERATIONS had a problem with SEAT BELTS . motorized seat belt failed. *sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):JM1BG2326M0. Mazda 323 1991 problem was reported in HERMISTON, OR. Vehicle was not using Cruise Control. Mazda 323 1991 Suspension Front Wheel BearingMazda 323 1991 Suspension Front Wheel Bearing Review #506746 MAZDA 323 1991 car safety problem was reported on Oct 01, 1994.MAZDA 323 1991, manufactured by MAZDA NORTH AMERICAN OPERATIONS had a problem with SUSPENSION:FRONT:WHEEL BEARING . faulty front wheel bearings cause noise from front end..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):JM1BG2329M0. Mazda 323 1991 problem was reported in STRASBURG, VA. Vehicle was not using Cruise Control. Mazda 323 1991 Steering Rack And Pinion RackMazda 323 1991 Steering Rack And Pinion Rack Review #506746 MAZDA 323 1991 car safety problem was reported on June 01, 1995.MAZDA 323 1991, manufactured by MAZDA NORTH AMERICAN OPERATIONS had a problem with STEERING:RACK AND PINION:RACK . metal fragments in power steering rack..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):JM1BG2329M0. Mazda 323 1991 problem was reported in STRASBURG, VA. Vehicle was not using Cruise Control. Mazda 323 1991 Seat Belts Front RetractorMazda 323 1991 Seat Belts Front Retractor Review #802965 MAZDA 323 1991 car safety problem was reported on Apr 01, 1992.MAZDA 323 1991, manufactured by MAZDA NORTH AMERICAN OPERATIONS had a problem with SEAT BELTS:FRONT:RETRACTOR . the driver's side seat belt stuck in the middle of the retractor. *ak.0 person(s) were injured. 0 person(s) died.Mazda 323 1991 problem was reported in BELGRADE, MT. Original Owner. Vehicle was purchased on May 01, 1991. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Mazda 323 1991 drive type:FWD. FUEL SYSTEM:N/A. Mazda 323 1991 TRANSMISSION TYPE: AUTO. Mazda 323 1991 Seat Belts Front AnchorageMazda 323 1991 Seat Belts Front Anchorage Review #810140 MAZDA 323 1991 car safety problem was reported on .MAZDA 323 1991, manufactured by MAZDA NORTH AMERICAN OPERATIONS had a problem with SEAT BELTS:FRONT:ANCHORAGE . driver's side seat belt isn't working . *ak.0 person(s) were injured. 0 person(s) died.Mazda 323 1991 problem was reported in HUSTON, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Mazda 323 1991 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 0 mph. Mazda 323 1991 Exterior Lighting Turn Signal Flasher UnitMazda 323 1991 Exterior Lighting Turn Signal Flasher Unit Review #514079 MAZDA 323 1991 car safety problem was reported on Apr 01, 1996.MAZDA 323 1991, manufactured by MAZDA NORTH AMERICAN OPERATIONS had a problem with EXTERIOR LIGHTING:TURN SIGNAL:FLASHER UNIT . flasher unit failed..0 person(s) died.Mazda 323 1991 problem was reported in PEMBROKE P, FL. Vehicle was not using Cruise Control. Mazda 323 1991 drive type:FWD. FUEL SYSTEM:N/A. Mazda 323 1991 TRANSMISSION TYPE: MAN . Mazda 323 1991 Exterior Lighting Headlights Concealment DevicesMazda 323 1991 Exterior Lighting Headlights Concealment Devices Review #538837 MAZDA 323 1991 car safety problem was reported on .MAZDA 323 1991, manufactured by MAZDA NORTH AMERICAN OPERATIONS had a problem with EXTERIOR LIGHTING:HEADLIGHTS:CONCEALMENT DEVICES . the plastic lenses of both headlights have become milky and glazed..Mazda 323 1991 problem was reported in ORMOND BEA, FL. Original Owner. Vehicle was not using Cruise Control. Mazda 323 1991 drive type:FWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Mazda 323 1991 Exterior Lighting Headlights Review #539127 MAZDA 323 1991 car safety problem was reported on .MAZDA 323 1991, manufactured by MAZDA NORTH AMERICAN OPERATIONS had a problem with EXTERIOR LIGHTING:HEADLIGHTS . plastic headlight lenses are turning colors, causing light to be very dim when driving at night. qcaw.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):JM1BG232TMO. Mazda 323 1991 problem was reported in ORMOND BEA, FL. Original Owner. Vehicle was purchased on June 01, 1991. Vehicle was not using Cruise Control. Mazda 323 1991 Vehicle Speed Control Accelerator PedalMazda 323 1991 Vehicle Speed Control Accelerator Pedal Review #830988 MAZDA 323 1991 car safety problem was reported on Nov 09, 1998.MAZDA 323 1991, manufactured by MAZDA NORTH AMERICAN OPERATIONS had a problem with VEHICLE SPEED CONTROL:ACCELERATOR PEDAL . while backing out of a parking spot, the accelerator stuck and vehicle took off in reverse wide open. driver hit a chain link fence, vehicle spinned around a couple of times, hit a pole and began spinning aroung again before stopping. the vehicle was totalled. *ak.Vehicle was involved in a crash. 0 person(s) were injured. Vehicle Identification Number (VIN):JM1BG2326M0. Mazda 323 1991 problem was reported in CUPERTINO, CA. Original Owner. Vehicle was purchased on Oct 01, 1991. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Mazda 323 1991 drive type:FWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Mazda 323 1991 TRANSMISSION TYPE: AUTO. Mazda 323 1991 Visibility WindshieldMazda 323 1991 Visibility Windshield Review #831864 MAZDA 323 1991 car safety problem was reported on .MAZDA 323 1991, manufactured by MAZDA NORTH AMERICAN OPERATIONS had a problem with VISIBILITY:WINDSHIELD . the window moulding on the driver's and passenger's side windows is clipped on. the window moulding is not bolded on sercurely. about 2 or 3 years ago while driving the moulding on windshield came off and hit the windshield. the problem was reported to the dealer/manufacturer .the problem has not been corrected. *ak.Vehicle Identification Number (VIN):JM1BG2325M0. Mazda 323 1991 problem was reported in ORLANDO, FL. Original Owner. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Mazda 323 1991 Seat BeltsMazda 323 1991 Seat Belts Review #828704 MAZDA 323 1991 car safety problem was reported on Apr 12, 1998.MAZDA 323 1991, manufactured by MAZDA NORTH AMERICAN OPERATIONS had a problem with SEAT BELTS . when driver gets into the vehicle the automatic seat belt jams on anyone that is sitting in the seat, and it very hard to be released from the seat belt. *ak.Vehicle Identification Number (VIN):JM1BG2324MO. Mazda 323 1991 problem was reported in MOMTEREY, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Mazda 323 1991 Seat Belts Front WebbingMazda 323 1991 Seat Belts Front Webbing Review #867063 MAZDA 323 1991 car safety problem was reported on July 29, 2000.MAZDA 323 1991, manufactured by MAZDA NORTH AMERICAN OPERATIONS had a problem with SEAT BELTS:FRONT:WEBBING . recall 97v211000/ manufacturer's recall 72803/ shoulder seat belts. consumer took vehicle in for an appointment, waited for a couple of hours & found out that dealer didn't have the part. consumer feels that when appointment was made they could have been advised that the part was out of stock. *ak.Vehicle Identification Number (VIN):NOT AVAILAB. Mazda 323 1991 problem was reported in APACHEE JUNCTION, AZ. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Mazda 323 1991 Seat Belts Review #872099 MAZDA 323 1991 car safety problem was reported on .MAZDA 323 1991, manufactured by MAZDA NORTH AMERICAN OPERATIONS had a problem with SEAT BELTS . consumer received recall letter 97v211000 concerning automatic shoulder belts. dealer refused to correct recall problem because there was no mazda mechanic at dealership.*ak.Vehicle Identification Number (VIN):JM1BG2328M0. Mazda 323 1991 problem was reported in NATICK, MA. Vehicle was purchased on Oct 05, 1999. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Mazda 323 1991 drive type:FWD. Mazda 323 1991 TRANSMISSION TYPE: MAN . Mazda 323 1991 Seat Belts Front Webbing Review #555610 MAZDA 323 1991 car safety problem was reported on .MAZDA 323 1991, manufactured by MAZDA NORTH AMERICAN OPERATIONS had a problem with SEAT BELTS:FRONT:WEBBING . consumer took vehicle into dealer for recall (97v-211) repair of the inoperative passive restraint system, dealer had no parts availabe to repair the vehicle. nlm.Mazda 323 1991 problem was reported in BOISE, ID. Vehicle was not using Cruise Control. Mazda 323 1991 Seat Belts Review #891133 MAZDA 323 1991 car safety problem was reported on Feb 06, 2001.MAZDA 323 1991, manufactured by MAZDA NORTH AMERICAN OPERATIONS had a problem with SEAT BELTS . took vehicle in for recall 97 v 211 000. after receiving vehicle back seatbelt light comes on, and chime rings when seatbelt is fastened. please provide any further infomation. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):JM1BG2321M0. Mazda 323 1991 problem was reported in LAWRENCE, KS. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph. |
-
Mazda 323 1991 Forum
Discuss and Report Mazda 323 Problems -
Service Bulletins
View Recent Mazda 323 1991 repair guidance -
Recalls
Latest recall and safety Mazda 323 1991 information
Mazda 323 1991 Systems
Exterior Lighting Headlights 1 Review(s) Exterior Lighting Headlights Concealment Devices 1 Review(s) Exterior Lighting Turn Signal Flasher Unit 1 Review(s) Seat Belts 6 Review(s) Seat Belts Front Anchorage 1 Review(s) Seat Belts Front Buckle Assembly 2 Review(s) Seat Belts Front Retractor 3 Review(s) Seat Belts Front Warning Light/devices 1 Review(s) Seat Belts Front Webbing 2 Review(s) Steering Rack And Pinion Rack 1 Review(s) Suspension Front Wheel Bearing 2 Review(s) Vehicle Speed Control Accelerator Pedal 1 Review(s) Visibility Windshield 1 Review(s) |
Search 1000s of Car Reviews, Recalls and Technical Bulletins
Start by entering a car model, system, manufacturer or any combination of keywords.
Mazda 323 1991 Reports
My 2001 626 transmission slips slightly when first put it into drive from park then bucks. After it engages it shifts fine I have a 1998 Mazda Protege LX Touring Edition (4dr) and need to install a rear-facing infant car seat (with base) in the back seat, preferably center position. Because I purchased my Mazda used, I do not have the Owner's Manual. I was told th question is whiseling noise when take off Sorry the question is for Tribute 2010 for whiseling noise when taking off Today I backed up in a narrow parking lot and as I put my 2009 Mazda 6 in drive and with my foot still on the brake the car accelrated unexpectedly over about 10 feet and into a building, the engine revving and smoking as I put it in neutral and t mazda3 2007 radio fuse location my alt light came on and stayed so i disconnected the battery to see if the car would sat running and now both headlaights burnt out the tach is in op no and the air bag lamp stays on all the time what happened? 94 mazda 626 air bag ligt stays on after alt burnt out what is the problem I REALLY THINK I HAVE THE ANSWER, I HOPE. I have an 2002 Mazda tribute it stalls especially in hot weather. The manual says very little, but it said it may be a vapor lock. My car was parked inside a humid garage so when it stalls on me seas Another really difficult thing to diagnose was the engine light, and warning bell sounding off for a yr. the dealer ship misdiagnosed the problem. Charged me for a diagnostic test they did not do. They sold me a battery, and sent me down the r I can't find my Satellitte Radio Number, it appeared originally on my NAV Screen when I would depress the SAT button. It no longer appears. I don't know if that's a malfunction. i have a 2002 millenia , would a 1998 automtic transmission work for car, denny.koch@insightbb.com
I have a 2008 Mazda CX-9 Grand touring with the Navigation touch s