Honda Cbr600f4 2000 Suspension Rear Review #562660
HONDA CBR600F4 2000 car safety problem was reported on June 03, 2000.HONDA CBR600F4 2000, manufactured by HONDA (AMERICAN HONDA MOTOR CO.) had a problem with SUSPENSION:REAR . while driving, consumer may have hit a pothole in the street which caused the rear suspension forks to break away from the motorcycle, in which consumer loss control of the motorcycle and was injuried, upon inspection it appeared that the welds connecting the rear suspension forks to the rear suspension casting of the motorcycle broke due to mechanical overload, the weld joints of the rear suspension assembly were weaker than the casting or the forks, the weld throats should have been made stronger than the forks, also the weld metal alloy appeared to have been excessively brittle for use in fabricating critical structual suspension parts in the motorcycle.(attorney for client)*jb.1 person(s) were injured. Vehicle Identification Number (VIN):JH2PC3501YM. Honda Cbr600f4 2000 problem was reported in SOUTH BEND, IN. Original Owner. Vehicle was purchased on Apr 24, 2000. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.
Honda Cbr600f4 2000 Suspension Rear Review #562660
HONDA CBR600F4 2000 car safety problem was reported on June 03, 2000.HONDA CBR600F4 2000, manufactured by HONDA (AMERICAN HONDA MOTOR CO.) had a problem with SUSPENSION:REAR . while driving, consumer may have hit a pothole in the street which caused the rear suspension forks to break away from the motorcycle, in which consumer loss control of the motorcycle and was injuried, upon inspection it appeared that the welds connecting the rear suspension forks to the rear suspension casting of the motorcycle broke due to mechanical overload, the weld joints of the rear suspension assembly were weaker than the casting or the forks, the weld throats should have been made stronger than the forks, also the weld metal alloy appeared to have been excessively brittle for use in fabricating critical structual suspension parts in the motorcycle.(attorney for client)*jb .1 person(s) were injured. Vehicle Identification Number (VIN):JH2PC3501YM. Honda Cbr600f4 2000 problem was reported in SOUTH BEND, IN. Original Owner. Vehicle was purchased on Apr 24, 2000. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.
Honda Cbr600f4 2000 Engine And Engine Cooling Cooling System Review #567164
HONDA CBR600F4 2000 car safety problem was reported on .HONDA CBR600F4 2000, manufactured by HONDA (AMERICAN HONDA MOTOR CO.) had a problem with ENGINE AND ENGINE COOLING:COOLING SYSTEM . the motorcycle was leaking oil due to broken tab on the water pump shaft. *yh .Honda Cbr600f4 2000 problem was reported in FENTON, MO. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.
Car-and-Safety.com