Gmc Steering Column Reports
22 Mar
GMC YUKON 2001 | Tilt Steering Wheel Locks In up position. dealer has inspected vehicle.*ak consumer has been experiencing problems with firestone |
GMC PICKUP 1996 | Wire For Low Beam Headlights broken at terminal block in steering column, causing lights not to work. other wires damaged, not |
GMC SONOMA 1991 | Steering Wheel And Tilt Assembly came loose, making vehicle undriveable. told by various gm mechanics that this is a common problem with |
GMC JIMMY S15 1991 | Tilt Unit On Main Steering column broke. *ak |
GMC S15 1986 | Tilt Steering And Column Loose. you can wobble the steering wheel one inch. *ak |
GMC SIERRA 1995 | The Tilt Action Of The steering wheel can cause the electrical wires to crimp/break, or short out at their connectors on the back of |
GMC SONOMA 1997 | When Steering Wheel Is In tilt position gauges are not visible. yh |
GMC SONOMA 2002 | This Vehicle Is Equipped With tilt steering. consumer states that the steering wheel cannot be used in the full tilt position because it |
GMC SIERRA 1500 2002 | Tl* The Contact Owns A 2002 gmc sierra 1500. while making a left turn the steering column locked without prior warning. after completing |
GMC SIERRA 1500 2003 | Tl*the Contact Owns A 2003 gmc sierra 1500. the contact heard a rubbing sound coming from the steering column. the dealer |
GMC SONOMA 2002 | On 1/25/06 I Took My 2002 gmc sonoma pickup truck to allen gmc in laguna niguel, ca to have them check out a clicking |
GMC SIERRA 2003 | The Steering Column Makes A popping sound as if something is loose in it. the problem was supposedly fixed while the vehicle was under |
GMC SIERRA 1500 2004 | Tl*the Contact Owns A 2004 gmc sierra 1500. while driving 40 mph, the contact heard a clunking noise coming from the steering |
GMC YUKON XL 2001 | Clunking Noise When Steering Wheel is turned during slow maneuvers or when going over rough roads. *tr |
GMC S10 1995 | Gmc Failed To Notify Owners of 1995 chevrolet s10 pick-up of recalls. upon searching and contacting gmc directly i found that their data |
GMC YUKON 2004 | 2004 Yukon Customer States That in dec began experiencing a rattle that became louder over a period of a couple weeks**cc the dealer stated |
GMC YUKON XL 2005 | Tl*- The Contact Heard a beeping noise at the rear of the 2005 gmc yukon when she slowed down to make a |
GMC YUKON XL 2004 | In December Of 2005, starting hearing a loud rattle coming from the left front side of my 2004 gmc yukon with 26,099 miles. |
GMC SIERRA 1500 2004 | 1 Speedometer Registering 120 Sitting still ( replaced cluster). 2 wipers would not shut off ( replaced wiper motor circuit board) 3. knock |
GMC SIERRA 1500 2005 | Intermediate Steering Column Began Rattling and felt extremely loose at 12,000 miles. dealership lubed part but did not replace. rattling |
GMC SIERRA 1500 2004 | I Have A 2004 Gmc sierra ext. cab truck with about 70k miles on it. in the past week, the speedometer |
GMC SIERRA 2003 | On 08/10/04 Rattle Or Clunk can be felt in steering. gmc service department verified concern and lubed the steering shaft. on 09/09/04 clunk |
GMC JIMMY 2001 | Dt*: The Contact Stated While driving 30 mph on normal road conditions, smoke started coming out of the steering column. no warning |
GMC SIERRA 1500 2005 | Knocking Noise And Vibration In steering column. i have taken the vehicle to the dealership on 2 occasions and they've said it's a |
GMC SIERRA 1500 2005 | Dt*: The Contact Stated while traveling 40 mph, the steering was loose and wobbly. the vehicle was taken to the dealership |
GMC YUKON XL 2002 | Dt*: The Contact Stated In november when the vehicle was taken to the dealership for routine service, the dealership noticed the rear rotors were |
GMC YUKON 2003 | Dt*: The Contact Stated the steering shaft was replaced under recall january 2005. while driving at various speeds and when the steering |
GMC YUKON 2001 | Dt*: The Contact Stated while turning sharply at low speeds the steering wheel made a popping noise. the dealer recommended greasing the |
GMC SIERRA 2002 | There Is Rattle/vibration In My truck's steering column. any time i go over an uneven surface i hear an annoying rattle coming from |
GMC SIERRA 2003 | My 2003 Gmc Sierra 1500 has a "clunking" sound, coming from the steering column, when i turn the steering wheel while the |
GMC YUKON XL 2002 | On 07/14/03 At 22602 Miles, we took our 2002 yukon xl (regency edition) to suss pontiac in denver, colorado, to investigate a |
GMC YUKON DENALI 2003 | The Steering Column Of My 2003 yukon denali with 50,910 miles got loose. i took vehicule to a gmc dealer to get it |
GMC SIERRA 2001 | Disc Rotor Delamination, Anti-lock control. i was pulling a 3/4 ton van stuck in his yard, as i got him close to |
GMC SIERRA 2002 | Hasn't Failed Yet, But there is a rattle in the steering colum which dealer states is normal, sure doesn't feel normal to me. |
GMC SIERRA 2004 | Consumer States: Set 2 yr old son in passenger seat took keys out of seat laid in console, child stuck key in switch |
GMC SIERRA 2003 | Consumer Complained About A Couple of problems. one was transmission. while driving at various speeds gear slipped. when vehicle was taken |
GMC YUKON XL 2002 | We Are Now Replacing The bushing in the steering column for the second time with less than 42,000 miles. this component was replaced |
GMC YUKON 2003 | Gmc Yukon 2003 Looseness In front suspension. *bf there was a rattle and or looseness in the front end. |
GMC DENALI 1999 | The Steering Column Shifter Broke while placing it into drive. the entire steering column had to replaced. *jb |
GMC SIERRA 2003 | The Steering Column Experienced A cracking noise while driving 1-25 mph, and while making turns. vehicle was taken to the dealer, who |
GMC YUKON 2003 | While Driving 65 Mph And pulling a trailer vehicle stalled. prior to stalling there was some hesitation and jerking as if not getting |
GMC SIERRA 2001 | A Gmc Service Manager Conveyed to me that several gm truck owners have reported excessive wear to the steering shaft leading through the firewall. |
GMC JIMMY 2000 | While Driving Steering Column started smoking . no fire reported. *ak |
GMC SAFARI 1997 | Steering Column Failed While turning left. dealer stated steering pump broke. as a result of steering failure the power |
GMC SIERRA 1999 | Recall 98v242000 Concerning Steering gear/frame bolts: at any speed the steering wheel has too much play in it. also, a |
GMC YUKON 2001 | Headlights Fail To Come On sometimes if steering wheel is tilted, it will have to move tilt on steering wheel sometimes they will come |
GMC YUKON 2003 | Excessive "play" In Steering Column of 2003 gmc yukon, after 26,000 miles and 8 months of driving was repaired under warranty or maintenance |
GMC JIMMY 1997 | Consumer States That While Driving at any speed and with no warning the steering bolts are lose, and it is causing the steering |
GMC SIERRA 2003 | I Got A New 2003 gmc sierra 1500 the front bumper start to show rust in under 4000 miles then i got oil |
GMC SIERRA 1991 | The Bolts Which Held The steering column in place had come loose. the dealer advised there was no replacement part, however the |
On This Page
my system is leaking really bad on my 2001 gmc 2500 was told it is a power steering hydraulic booster can not find one anywhere Every time I move the tilt steering wheel up or down the windshield wipers operate for 2 or 3 swipes. Any ideas? Tom@losbanopsrelestate.com i just replaced the steering sensor and the truck still wanders and has play between 11 an 1 oclock any ideas what it could be sorry it is a 97 gmc yukon that i replaced the steering sensor on i replaced the steering sensor on my 97 gmc yukon it stop sliping but i still have play inbetween 11 and 1 oclock and tends to wander any idea whats wrong?
is this a re call