Car-and-Safety.com

Ford F250 1987 Safety Reports and Reviews



Ford F250 1987 Reviews



Ford F250 1987 Power Train Clutch Assembly

Ford F250 1987 Power Train Clutch Assembly Review #961472

FORD F250 1987 car safety problem was reported on Mar 08, 1994.FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with POWER TRAIN:CLUTCH ASSEMBLY . four speed. inproper shifting of clutch assembly. tt.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FTHX25L4HK. Ford F250 1987 problem was reported in AMARILLO, TX. Vehicle was not using Cruise Control.

Ford F250 1987 Fuel System, Gasoline Fuel Injection System

Ford F250 1987 Fuel System, Gasoline Fuel Injection System Review #962206

FORD F250 1987 car safety problem was reported on Jan 06, 1995.FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM . defective fuel injector pump, causing fuel spillage when driving. tt.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FTHX251XHK. Ford F250 1987 problem was reported in CROSSWICKS, NJ. Vehicle was not using Cruise Control.

Ford F250 1987 Service Brakes, Hydraulic Power Assist Hydraulic

Ford F250 1987 Service Brakes, Hydraulic Power Assist Hydraulic Review #962206

FORD F250 1987 car safety problem was reported on Sept 01, 1994.FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC:POWER ASSIST:HYDRAULIC . vacuum pup malfunctioned, causing brake failure. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FTHX251XHK. Ford F250 1987 problem was reported in CROSSWICKS, NJ. Vehicle was not using Cruise Control.

Ford F250 1987 Service Brakes, Hydraulic Antilock

Ford F250 1987 Service Brakes, Hydraulic Antilock Review #967008

FORD F250 1987 car safety problem was reported on Apr 29, 1995.FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC:ANTILOCK . abs rear brake,over heating of the brake line, causing loss of effectiveness when coming down a hill while carrying a trailer. tt.0 person(s) were injured. 0 person(s) died.Ford F250 1987 problem was reported in FERNDALE, WA. Vehicle was not using Cruise Control.

Ford F250 1987 Engine And Engine Cooling Engine Gasoline

Ford F250 1987 Engine And Engine Cooling Engine Gasoline Review #971623

FORD F250 1987 car safety problem was reported on Sept 06, 1987.FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with ENGINE AND ENGINE COOLING:ENGINE:GASOLINE . front housing developed cracks resulting in front axle breaking. this is the second occurance. tt *jb.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FTHF26H4HC. Ford F250 1987 problem was reported in CONCORD, NH. Original Owner. Vehicle was not using Cruise Control. Ford F250 1987 drive type:4WD. FUEL TYPE: GAS. Ford F250 1987 TRANSMISSION TYPE: AUTO.

Ford F250 1987 Suspension

Ford F250 1987 Suspension Review #971623

FORD F250 1987 car safety problem was reported on Sept 06, 1987.FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with SUSPENSION . front housing developed cracks resulting in front axle breaking. this is the second occurance. tt *jb.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FTHF26H4HC. Ford F250 1987 problem was reported in CONCORD, NH. Original Owner. Vehicle was not using Cruise Control. Ford F250 1987 drive type:4WD. FUEL TYPE: GAS. Ford F250 1987 TRANSMISSION TYPE: AUTO.

Ford F250 1987 Power Train Transfer Case (4-wheel Drive)

Ford F250 1987 Power Train Transfer Case (4-wheel Drive) Review #484698

FORD F250 1987 car safety problem was reported on Aug 08, 1995.FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with POWER TRAIN:TRANSFER CASE (4-WHEEL DRIVE) . light weight design os drive train caused transfer case to crack, due inability to support weight of motor/transmission. *sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FTEFT6N2HC. Ford F250 1987 problem was reported in HARRISON, MI. Vehicle was not using Cruise Control.

Ford F250 1987 Visibility Windshield

Ford F250 1987 Visibility Windshield Review #484698

FORD F250 1987 car safety problem was reported on Apr 01, 1992.FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with VISIBILITY:WINDSHIELD . windshield cracked. *sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FTEFT6N2HC. Ford F250 1987 problem was reported in HARRISON, MI. Vehicle was not using Cruise Control.

Ford F250 1987 Wheels Center Section

Ford F250 1987 Wheels Center Section Review #484698

FORD F250 1987 car safety problem was reported on Apr 01, 1992.FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with WHEELS:CENTER SECTION . left front inner wheel hub is worn out. *sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FTEFT6N2HC. Ford F250 1987 problem was reported in HARRISON, MI. Vehicle was not using Cruise Control.

Ford F250 1987 Power Train Clutch Assembly Bell Housing

Ford F250 1987 Power Train Clutch Assembly Bell Housing Review #484698

FORD F250 1987 car safety problem was reported on Apr 01, 1992.FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with POWER TRAIN:CLUTCH ASSEMBLY:BELL HOUSING . clutch assembly/bell housing cracked. *sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FTEFT6N2HC. Ford F250 1987 problem was reported in HARRISON, MI. Vehicle was not using Cruise Control.

Ford F250 1987 Electrical System Ignition Switch

Ford F250 1987 Electrical System Ignition Switch Review #983023

FORD F250 1987 car safety problem was reported on Mar 01, 1996.FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM:IGNITION:SWITCH . driver experienced an electrical system fire while vehicle was running caused by the ignition switch shorting, fire burnt the dashboard and steering wheel. *ak.Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Ford F250 1987 problem was reported in PITTSFIELD, MA. Vehicle was not using Cruise Control.

Ford F250 1987 Electrical System Ignition Switch Review #983023

FORD F250 1987 car safety problem was reported on Mar 01, 1996.FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM:IGNITION:SWITCH . driver experienced an electrical system fire while vehicle was running caused by the ignition switch shorting, fire burnt the dashboard and steering wheel. *ak.Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Ford F250 1987 problem was reported in PITTSFIELD, MA. Vehicle was not using Cruise Control.

Ford F250 1987 Service Brakes, Hydraulic Antilock

Ford F250 1987 Service Brakes, Hydraulic Antilock Review #983242

FORD F250 1987 car safety problem was reported on Apr 16, 1996.FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC:ANTILOCK . abs, brake failure, pedal floor, loss of effectiveness, abs light came on. *ak consumer was having problems with hydraulic system front brake system was replaced, as well as the rear brake sytem and seal there was also a brake fluid leak from the brake failure, abs light was stillcoming on, but that problem could not be duplicated.*jb.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FTHF26L6HP. Ford F250 1987 problem was reported in APTOS, CA. Vehicle was purchased on Apr 01, 1990. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford F250 1987 drive type:4WD. FUEL TYPE: GAS. Ford F250 1987 TRANSMISSION TYPE: MAN . VEHICLE SPEED: 50 mph.

Ford F250 1987 Service Brakes, Hydraulic Foundation Components

Ford F250 1987 Service Brakes, Hydraulic Foundation Components Review #983242

FORD F250 1987 car safety problem was reported on Apr 16, 1996.FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS . abs, brake failure, pedal floor, loss of effectiveness, abs light came on. *ak consumer was having problems with hydraulic system front brake system was replaced, as well as the rear brake sytem and seal there was also a brake fluid leak from the brake failure, abs light was stillcoming on, but that problem could not be duplicated.*jb.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FTHF26L6HP. Ford F250 1987 problem was reported in APTOS, CA. Vehicle was purchased on Apr 01, 1990. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford F250 1987 drive type:4WD. FUEL TYPE: GAS. Ford F250 1987 TRANSMISSION TYPE: MAN . VEHICLE SPEED: 50 mph.

Ford F250 1987 Steering Wheel And Handle Bar

Ford F250 1987 Steering Wheel And Handle Bar Review #983421

FORD F250 1987 car safety problem was reported on Mar 12, 1996.FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with STEERING:WHEEL AND HANDLE BAR . a fire started at the base of the steering column and went up the column. please de describe. *ak.Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FTHF26H4JC. Ford F250 1987 problem was reported in WENHAM, MA. Vehicle was not using Cruise Control.

Ford F250 1987 Electrical System Ignition Switch

Ford F250 1987 Electrical System Ignition Switch Review #983512

FORD F250 1987 car safety problem was reported on Mar 12, 1996.FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM:IGNITION:SWITCH . the ignition switch caused the vehicle to go up in flames. please describe. *ak.Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Ford F250 1987 problem was reported in PITTSFIELD, MA. Vehicle was not using Cruise Control.

Ford F250 1987 Electrical System Ignition Switch Review #983654

FORD F250 1987 car safety problem was reported on Apr 25, 1996.FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM:IGNITION:SWITCH . ignition switch in the steering column appears to be potential fire hazard; steering column gets so hot, cannot touch with hands; sometimes doesn't activate.*ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FTHF2517HC. Ford F250 1987 problem was reported in JACKSON, MI. Vehicle was not using Cruise Control.

Ford F250 1987 Electrical System Ignition Switch Review #984511

FORD F250 1987 car safety problem was reported on Apr 27, 1996.FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM:IGNITION:SWITCH . an electrical short in the igntion switch, caused the steering column to catch on fire. *ak.Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FTHF25L1HK. Ford F250 1987 problem was reported in RANGER, TX. Vehicle was not using Cruise Control.

Ford F250 1987 Electrical System Ignition Switch Review #984511

FORD F250 1987 car safety problem was reported on Apr 27, 1996.FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM:IGNITION:SWITCH . an electrical short in the igntion switch, caused the steering column to catch on fire. *ak.Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FTHF25L1HK. Ford F250 1987 problem was reported in RANGER, TX. Vehicle was not using Cruise Control.

Ford F250 1987 Electrical System Starter Assembly

Ford F250 1987 Electrical System Starter Assembly Review #504119

FORD F250 1987 car safety problem was reported on Jan 01, 1994.FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM:STARTER ASSEMBLY . starter engaged when driver stepped on brake. *dsh.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FTHE25L7HC. Ford F250 1987 problem was reported in CANBY, OR. Vehicle was not using Cruise Control.

Ford F250 1987 Electrical System Ignition Switch

Ford F250 1987 Electrical System Ignition Switch Review #504242

FORD F250 1987 car safety problem was reported on Jan 05, 1993.FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM:IGNITION:SWITCH . ginition switch shorted out, causing fire. *dsh.Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Ford F250 1987 problem was reported in PORTLAND, OR. Vehicle was not using Cruise Control.

Ford F250 1987 Service Brakes, Hydraulic Foundation Components

Ford F250 1987 Service Brakes, Hydraulic Foundation Components Review #985692

FORD F250 1987 car safety problem was reported on June 14, 1996.FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS . brakes fade out. please give more detail . *ak.Vehicle was involved in a crash. 0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FTHX26L3HK. Ford F250 1987 problem was reported in MARYVILLE, 00. Vehicle was not using Cruise Control.

Ford F250 1987 Electrical System Ignition Switch

Ford F250 1987 Electrical System Ignition Switch Review #986058

FORD F250 1987 car safety problem was reported on Oct 21, 1995.FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM:IGNITION:SWITCH . electrical short in the ignition switch, causing the vehicle to catch fire in the steering column. *ak.Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Ford F250 1987 problem was reported in CADES, SC. Vehicle was not using Cruise Control.

Ford F250 1987 Electrical System Wiring Interior/under Dash

Ford F250 1987 Electrical System Wiring Interior/under Dash Review #504986

FORD F250 1987 car safety problem was reported on May 01, 1996.FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM:WIRING:INTERIOR/UNDER DASH . wiring harness under dash shorted, causing fire. *dh.Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FTHF25L1HK. Ford F250 1987 problem was reported in UNK, 00. Vehicle was not using Cruise Control.

Ford F250 1987 Engine And Engine Cooling Engine Gasoline

Ford F250 1987 Engine And Engine Cooling Engine Gasoline Review #986561

FORD F250 1987 car safety problem was reported on Apr 29, 1996.FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with ENGINE AND ENGINE COOLING:ENGINE:GASOLINE . while truck was parked in parking lot it caught on fire.. *ak *slc.Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FTHX26L2HK. Ford F250 1987 problem was reported in MOHAVE VALLE, AZ. Original Owner. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford F250 1987 drive type:4WD. Ford F250 1987 TRANSMISSION TYPE: AUTO.

Ford F250 1987 Electrical System Ignition Switch

Ford F250 1987 Electrical System Ignition Switch Review #800107

FORD F250 1987 car safety problem was reported on Mar 23, 1988.FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM:IGNITION:SWITCH . electrical short in the steering column, causing the vehicle to catch on fire in the steering.*ak.Vehicle was on fire. Vehicle Identification Number (VIN):1FTEF26Y9HK. Ford F250 1987 problem was reported in WINTERSET, IA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Ford F250 1987 Power Train Clutch Assembly Pedal/linkage

Ford F250 1987 Power Train Clutch Assembly Pedal/linkage Review #800387

FORD F250 1987 car safety problem was reported on Feb 01, 1996.FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with POWER TRAIN:CLUTCH ASSEMBLY:PEDAL/LINKAGE . consumer was driving and the clutch came apart, purchased truck used from someone. please describe .*ak.Vehicle Identification Number (VIN):1FTHX251XHK. Ford F250 1987 problem was reported in SIMI VALLEY, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Ford F250 1987 Service Brakes, Hydraulic Foundation Components Master Cylinder

Ford F250 1987 Service Brakes, Hydraulic Foundation Components Master Cylinder Review #806381

FORD F250 1987 car safety problem was reported on .FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER . when appyling the brakes the pedal will travel to the floor, causing extended stopping distance, speed sensor in the differential has been replaced also the valve assembly and the master cylinder. consumer will add repair information. *ak.Vehicle Identification Number (VIN):1FPHX26L1HK. Ford F250 1987 problem was reported in SAN DIEGO, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Ford F250 1987 Electrical System Ignition Switch

Ford F250 1987 Electrical System Ignition Switch Review #811399

FORD F250 1987 car safety problem was reported on Apr 14, 1997.FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM:IGNITION:SWITCH . vehicle caught on fire underdash while parked caused by faulty ignition switch. ignition switch will be replaced by owner; not included in ford's ignition switch recall. *ak.Vehicle was on fire. Vehicle Identification Number (VIN):1FTHF2610HK. Ford F250 1987 problem was reported in SELIGMAN, MO. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. FUEL SYSTEM:N/A. FUEL TYPE: DIESEL. Ford F250 1987 TRANSMISSION TYPE: MAN . VEHICLE SPEED: 0 mph.

Ford F250 1987 Steering Wheel And Handle Bar

Ford F250 1987 Steering Wheel And Handle Bar Review #515404

FORD F250 1987 car safety problem was reported on .FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with STEERING:WHEEL AND HANDLE BAR . steering column overheats..0 person(s) died.Vehicle Identification Number (VIN):1FTHF2519HP. Ford F250 1987 problem was reported in PORT HUENEME, CA. Original Owner. Vehicle was purchased on Aug 30, 1987. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford F250 1987 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: DIESEL. Ford F250 1987 TRANSMISSION TYPE: AUTO.

Ford F250 1987 Service Brakes, Hydraulic Foundation Components

Ford F250 1987 Service Brakes, Hydraulic Foundation Components Review #816965

FORD F250 1987 car safety problem was reported on Sept 09, 1987.FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS . driving in mountain area a towing trailer. brakes would fail going down hill. took to dealer to have checked & found nothing. had master cylinder changed & brakes still failed. would kick in a bit. brakes failed with or without trailer behind. going on 10 years has vehicle in yard now. *ak *slc.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FTHX26LXMK. Ford F250 1987 problem was reported in PATTERSON, CA. Original Owner. Vehicle was purchased on June 05, 1987. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford F250 1987 drive type:4WD. FUEL TYPE: GAS. Ford F250 1987 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 0 mph.

Ford F250 1987 Engine And Engine Cooling Cooling System Fan

Ford F250 1987 Engine And Engine Cooling Cooling System Fan Review #522400

FORD F250 1987 car safety problem was reported on .FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN . the fan broke and a piece flew through the hood of the vehicle..Ford F250 1987 problem was reported in FALLBROOK, CA. Vehicle was not using Cruise Control.

Ford F250 1987 Engine And Engine Cooling Engine Gasoline

Ford F250 1987 Engine And Engine Cooling Engine Gasoline Review #816712

FORD F250 1987 car safety problem was reported on Sept 08, 1997.FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with ENGINE AND ENGINE COOLING:ENGINE:GASOLINE . consumer states that while driving the vehicle will cut off giving the driver no indication. after the vehicle shuts off it takes 5 hours for the vehicle to start.the dealer has been contacted . owner has repalced several parts on vehicle trying to stop the sudden cut offs..Vehicle Identification Number (VIN):1FTHX25L4HK. Ford F250 1987 problem was reported in ORANGEVALE, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford F250 1987 drive type:RWD. FUEL TYPE: GAS. Ford F250 1987 TRANSMISSION TYPE: AUTO.

Ford F250 1987 Steering Wheel And Handle Bar

Ford F250 1987 Steering Wheel And Handle Bar Review #544400

FORD F250 1987 car safety problem was reported on .FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with STEERING:WHEEL AND HANDLE BAR . steering column and the turning lights would not function properly after a lot of work..Ford F250 1987 problem was reported in FALLBROOK, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Ford F250 1987 Service Brakes, Hydraulic Foundation Components Master Cylinder

Ford F250 1987 Service Brakes, Hydraulic Foundation Components Master Cylinder Review #544400

FORD F250 1987 car safety problem was reported on .FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER . problems with brake, replace master cylinder several times and still lost the brakes anytime they got hot..Ford F250 1987 problem was reported in FALLBROOK, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Ford F250 1987 Engine And Engine Cooling Cooling System Fan

Ford F250 1987 Engine And Engine Cooling Cooling System Fan Review #544400

FORD F250 1987 car safety problem was reported on .FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with ENGINE AND ENGINE COOLING:COOLING SYSTEM:FAN . fan broke and a fiece flew thru the hoo of the vehicle..Ford F250 1987 problem was reported in FALLBROOK, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Ford F250 1987 Engine And Engine Cooling Engine Gasoline

Ford F250 1987 Engine And Engine Cooling Engine Gasoline Review #544400

FORD F250 1987 car safety problem was reported on .FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with ENGINE AND ENGINE COOLING:ENGINE:GASOLINE . engine blew up, replace engine..Ford F250 1987 problem was reported in FALLBROOK, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Ford F250 1987 Engine And Engine Cooling Exhaust System

Ford F250 1987 Engine And Engine Cooling Exhaust System Review #826290

FORD F250 1987 car safety problem was reported on July 28, 1998.FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with ENGINE AND ENGINE COOLING:EXHAUST SYSTEM . consumer pulled off gravel road onto a black top when the vehicle's original smog locked up. ther was no warning at all. *ak.Vehicle Identification Number (VIN):IFTH25Y3HKA. Ford F250 1987 problem was reported in FAIRPLAY, MO. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control.

Ford F250 1987 Electrical System Ignition Switch

Ford F250 1987 Electrical System Ignition Switch Review #507096

FORD F250 1987 car safety problem was reported on .FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM:IGNITION:SWITCH . steering column becomes hot due to ignition switch failure..Vehicle Identification Number (VIN):1FTHX2517HB. Ford F250 1987 problem was reported in ENCINITAS, CA. Vehicle was not using Cruise Control.

Ford F250 1987 Service Brakes, Hydraulic Foundation Components

Ford F250 1987 Service Brakes, Hydraulic Foundation Components Review #539389

FORD F250 1987 car safety problem was reported on .FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS . brakes failed due to overheating of fluid, also damaging other brake components..Ford F250 1987 problem was reported in COLORADO S, CO. Vehicle was not using Cruise Control. Ford F250 1987 drive type:4WD.

Ford F250 1987 Fuel System, Gasoline Carburetor System

Ford F250 1987 Fuel System, Gasoline Carburetor System Review #512064

FORD F250 1987 car safety problem was reported on Aug 25, 1995.FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with FUEL SYSTEM, GASOLINE:CARBURETOR SYSTEM . accidental fire, resulted from an unspecified fuel leak emitting from the front of the holley carburetor..Vehicle Identification Number (VIN):1FTHX25LOHK. Ford F250 1987 problem was reported in MESQUITE, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Ford F250 1987 Fuel System, Gasoline Delivery

Ford F250 1987 Fuel System, Gasoline Delivery Review #705686

FORD F250 1987 car safety problem was reported on Mar 31, 1999.FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with FUEL SYSTEM, GASOLINE:DELIVERY . truck caught on fire after 4 month of ownership. fuel leak indicated as entire truck and road were inflamed..Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FTHF25H5HC. Ford F250 1987 problem was reported in BRIGHAM CITY, UT. Accident was reported to Police. Vehicle was purchased on Dec 01, 1998. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Ford F250 1987 drive type:RWD. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph.

Ford F250 1987 Vehicle Speed Control

Ford F250 1987 Vehicle Speed Control Review #840687

FORD F250 1987 car safety problem was reported on Aug 31, 1997.FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with VEHICLE SPEED CONTROL . cruise control malfuctioned, causing cruise control to get stuck in that mode. also, brakes did not work. had to have vehicle coasted, and turn off engine in order to stop vehicle. . *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FTHF2611HK. Ford F250 1987 problem was reported in KINGWOOD, TX. Original Owner. Vehicle was purchased on May 01, 1987. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Ford F250 1987 drive type:4WD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford F250 1987 TRANSMISSION TYPE: MAN . VEHICLE SPEED: 60 mph.

Ford F250 1987 Service Brakes, Hydraulic Foundation Components

Ford F250 1987 Service Brakes, Hydraulic Foundation Components Review #840687

FORD F250 1987 car safety problem was reported on Aug 31, 1997.FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS . cruise control malfuctioned, causing cruise control to get stuck in that mode. also, brakes did not work. had to have vehicle coasted, and turn off engine in order to stop vehicle. . *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FTHF2611HK. Ford F250 1987 problem was reported in KINGWOOD, TX. Original Owner. Vehicle was purchased on May 01, 1987. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Ford F250 1987 drive type:4WD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford F250 1987 TRANSMISSION TYPE: MAN . VEHICLE SPEED: 60 mph.

Ford F250 1987 Fuel System, Other Fuel Injection System

Ford F250 1987 Fuel System, Other Fuel Injection System Review #512064

FORD F250 1987 car safety problem was reported on Aug 25, 1995.FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with FUEL SYSTEM, OTHER:FUEL INJECTION SYSTEM . fuel leaking emitting from the front of the holley carburetor resulting in vehicle fire. mjs.Vehicle was on fire. Vehicle Identification Number (VIN):1FTHX25LOHK. Ford F250 1987 problem was reported in MESQUITE, TX. Vehicle was not using Cruise Control.

Ford F250 1987 Seats

Ford F250 1987 Seats Review #865766

FORD F250 1987 car safety problem was reported on June 14, 2000.FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with SEATS . driver seat broke off from the tracks after rear impact at 50 mph. dealer/manufacturer notified, and informed consumer that vehicle was out of warranty, and item was not cover under a recall. nothing can be done. *ak *ml.Vehicle was involved in a crash. 1 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FTHX26L6HK. Ford F250 1987 problem was reported in FLAGSTAFF, AZ. Accident was reported to Police. Vehicle was purchased on Aug 01, 1999. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Ford F250 1987 drive type:4WD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford F250 1987 TRANSMISSION TYPE: AUTO.

Ford F250 1987 Fuel System, Gasoline Delivery

Ford F250 1987 Fuel System, Gasoline Delivery Review #736773

FORD F250 1987 car safety problem was reported on .FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with FUEL SYSTEM, GASOLINE:DELIVERY . i have owned 2 f250 pickups. one 1983 and one 1987. they both have had 2ea failures of the fuel line to carburator float bowl fitting. the float bowl part number from ford is e5tz 9510-mb. the threaded bore of the float bowl becomes bell shaped over time. this causes fuel to leak between the fuel line and front float bowl. this fuels leaks on the hot manifold. ford knows of the problem and simply raised the price on the replacement part to earn more profit. it used to be less than $50 and currently is over $80. i will send two samples of the part so you may see for yourself what is happening. this is a major safety issue and i have no doubt affects thousands of ford f250's. *ak.Vehicle Identification Number (VIN):1FTHF26LXHP. Ford F250 1987 problem was reported in RIDGECREST, CA. Vehicle was purchased on June 01, 1998. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford F250 1987 drive type:4WD. FUEL TYPE: GAS.

Ford F250 1987 Power Train Clutch Assembly

Ford F250 1987 Power Train Clutch Assembly Review #748330

FORD F250 1987 car safety problem was reported on June 13, 2001.FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with POWER TRAIN:CLUTCH ASSEMBLY . the clutch failed to disengage properly and placed me in a hazardous driving situation. this clutch is hydraulically operated and a dealer repair was to replace the clutch master cylinder. this did not correct the problem. i investigated the operation of the clutch and found the cab firewall, where the clutch master cylinder is bolted to it, does not have enough strength to support the clutch operational stresses applied to it. this firewall had started to separate and allowed the clutch master cylinder to move when it was actuated, thereby the clutch was not able to disengage.*ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FTHX2514HK. Ford F250 1987 problem was reported in TUCSON, AZ. Vehicle was purchased on May 01, 1993. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford F250 1987 drive type:RWD. FUEL TYPE: DIESEL. VEHICLE SPEED: 35 mph.

Ford F250 1987 Tires

Ford F250 1987 Tires Review #750892

FORD F250 1987 car safety problem was reported on Aug 19, 2001.FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with TIRES . with no warning, rt front tire blew apart. loud, loud bang and truck jerked onto the shoulder, up over a 2 foot high berm, and took nearly 300 yards to stop. nothing seen in the road that i may have hit, tires had just been serviced 1 week prior. (we are extremely we did not roll over) tire has 4-5 slits going from tire bead to tire tread, and looks like the tire blew right across the tread. i do have the tire, and retrieved several feet of tread. have not contacted the dealer, as i don't know who made it. other dot numbers on the other 3 tires are as follows (the dot # i gave earlier appears to be correct, however, damage to the number occurred) dot vdor 8ac 315, vdor 8ac 076, vdor 8ac 076. tires have approximately 5000 miles on them and were purchased at the edwards afb exchange, edwards afb ca. 93524, on 01/05/97. can you tell me if there have been other failures such as this, and are there any recalls on this tire? thank you, steve shanahan. *ak (dot number: vdor8ac245 tiresize: l235/85r16).0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FTHX2517HK. Ford F250 1987 problem was reported in CALIFORNIA CITY, CA. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford F250 1987 drive type:RWD. FUEL TYPE: DIESEL. VEHICLE SPEED: 64 mph.

Ford F250 1987 Tires Tread/belt

Ford F250 1987 Tires Tread/belt Review #10083966

FORD F250 1987 car safety problem was reported on July 31, 2004.FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with TIRES:TREAD/BELT . bridgetone, lt235/85r16, dot: unknown. while driving 65 mph, the left rear tire tread separated. as result the bumper, tail pipe and fender was damaged. *ak *jb.Vehicle Identification Number (VIN):1FTHF26H5HN. Ford F250 1987 problem was reported in GLEN BURNIE, MD. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 8 CYLINDERS. Ford F250 1987 drive type:4WD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Ford F250 1987 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 65 mph.

Ford F250 1987 Tires Tread/belt Review #10096851

FORD F250 1987 car safety problem was reported on Oct 13, 2004.FORD F250 1987, manufactured by FORD MOTOR COMPANY had a problem with TIRES:TREAD/BELT . while driving 55 mph the rear driver side tire tread separated without warning. please provide additional information. *jb.0 person(s) were injured. 0 person(s) died.Mileage was 135000 miles. Vehicle Identification Number (VIN):NOT AVAILAB. Ford F250 1987 problem was reported in MADERA, CA. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.FUEL TYPE: GAS. Ford F250 1987 TRANSMISSION TYPE: AUTO.



Discuss Ford F250


No comments have been provided.