Ford E-250 1993 Service Brakes, Air Antilock Review #807568
FORD E-250 1993 car safety problem was reported on Aug 13, 1994.FORD E-250 1993, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, AIR:ANTILOCK . rear anti-lock brakes do not lock up but make the front brakes lock up which results in loss of control. *ak.Vehicle Identification Number (VIN):1FTFS24Y4PH. Ford E-250 1993 problem was reported in MIAMI SPRINGS, FL. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Ford E-250 1993 drive type:RWD. FUEL SYSTEM:N/A. Ford E-250 1993 TRANSMISSION TYPE: AUTO.
Ford E-250 1993 Service Brakes, Hydraulic Pedals And Linkages Review #815510
FORD E-250 1993 car safety problem was reported on Jan 03, 1995.FORD E-250 1993, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES . when driving the vehicle and tried stopping the vehicle at any given speed; and thinking of stepping on the brake,when actually stepped on the gas pedal. the to pedals are too close together. *ak .Vehicle Identification Number (VIN):1FTHS24H9PH. Ford E-250 1993 problem was reported in TREVOSE, PA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford E-250 1993 drive type:RWD. Ford E-250 1993 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 15 mph.
Ford E-250 1993 Vehicle Speed Control Review #818884
FORD E-250 1993 car safety problem was reported on .FORD E-250 1993, manufactured by FORD MOTOR COMPANY had a problem with VEHICLE SPEED CONTROL . vehicle was left running in driveway in park position, and the gears shifted to reverse and accelerated down the driveway into a neighbor's house. dealer can't find the problem. *ak.Vehicle was involved in a crash. Ford E-250 1993 problem was reported in BRAINTREE, MA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.
Ford E-250 1993 Power Train Clutch Assembly Review #844107
FORD E-250 1993 car safety problem was reported on May 15, 1997.FORD E-250 1993, manufactured by FORD MOTOR COMPANY had a problem with POWER TRAIN:CLUTCH ASSEMBLY . clutch rod goes through the firewall which is under the dashboard, and the clutch is working intermittently. *ak.Vehicle Identification Number (VIN):1FTHXZSMXPR. Ford E-250 1993 problem was reported in TEMPLE, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford E-250 1993 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: DIESEL. Ford E-250 1993 TRANSMISSION TYPE: MAN . VEHICLE SPEED: 15 mph.
Ford E-250 1993 Engine And Engine Cooling Exhaust System Review #714693
FORD E-250 1993 car safety problem was reported on .FORD E-250 1993, manufactured by FORD MOTOR COMPANY had a problem with ENGINE AND ENGINE COOLING:EXHAUST SYSTEM . the exhaust manifolds on my van failed about a year ago. i had them replaced with genuine ford parts. they continiue to glow orange everytime i drive the vehicle. i have had several mechanics look into the problem with no luck whatsoever. finally i called my local ford dealer here in santa cruz, ca. north bay ford intially agreed that the exhaust manifolds should not be getting that hot (glowing orange) so they ran a bunch of diagnostic test(s). all the on board sytems checked out and showed no problems so they called ford headquarters in dearborn mich. and the ford techs said that this is a normal condition. i decided to call three other ford dealerships in the monterey and san jose area and spoke with the service persons. when i described the problem i was having all the dealerships responded by asking me to make an appointment to have the problem fixed. for the exaust manifolds to glow orange i'm guessing the are reaching tempeture of near 1800 degrees.this can't be normal but if it is i feel that it must be a defective design. please let me know what i may do to further pursue this problem. any help would be greatly appreciated. sincerely, david reese (831)454-9948.Vehicle Identification Number (VIN):1FTGE24H5PH. Ford E-250 1993 problem was reported in SANTA CRUZ, CA. Original Owner. Vehicle was purchased on Mar 01, 1993. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford E-250 1993 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS.
Ford E-250 1993 Fuel System, Gasoline Storage Tank Assembly Review #716297
FORD E-250 1993 car safety problem was reported on .FORD E-250 1993, manufactured by FORD MOTOR COMPANY had a problem with FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY . leaking fuel tank due to abrasive wear at top of tank where attached to car body.strong gas fumes filled the van,noticeable for several months, becoming much worse. mechanic found three holes intop of tank.no buffers or padding were found between the tank and body of van.metal around holes brightly worn.shifting of gas in tank from leakage had loosened holding straps.great danger of fire.illness of chief driver with chest and lung pain from fumes..1 person(s) were injured. Vehicle Identification Number (VIN):1FDHS24H2PH. Ford E-250 1993 problem was reported in ELLENTON, FL. Original Owner. Vehicle was purchased on Apr 01, 1993. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Ford E-250 1993 drive type:FWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS.
Ford E-250 1993 Engine And Engine Cooling Review #10345585
FORD E-250 1993 car safety problem was reported on July 01, 2010.FORD E-250 1993, manufactured by FORD MOTOR COMPANY had a problem with ENGINE AND ENGINE COOLING . the vehicle was being driven on the highway, and it caught fire. the police and the fire department were present at the scene, but at the time the incident took place, it was a complete loss. *tr.Vehicle was on fire. Mileage was 162792 miles. Vehicle Identification Number (VIN):1FTFE24YXPH. Ford E-250 1993 problem was reported in CAROLINA, PR. Accident was reported to Police. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.
Car-and-Safety.com