Car-and-Safety.com

Ford Crown Victoria 2008 Seat Belts Front Buckle Assembly

Ford Crown Victoria 2008 Seat Belts Front Buckle Assembly Review #10215611

FORD CROWN VICTORIA 2008 car safety problem was reported on Jan 07, 2008.FORD CROWN VICTORIA 2008, manufactured by FORD MOTOR COMPANY had a problem with SEAT BELTS:FRONT:BUCKLE ASSEMBLY . drivers side seat belt buckle broke during a collision / accident. the vehicle has been taken out of service and secured so that nobody can tamper with it. there is no information regarding injury to the occupant. *tr.Vehicle was involved in a crash. 1 person(s) were injured. 0 person(s) died.Mileage was 1959 miles. Vehicle Identification Number (VIN):2FAFP71V58X. Ford Crown Victoria 2008 problem was reported in CAPITAL HEIGHTS, MD. Accident was reported to Police. Original Owner. Vehicle was purchased on Sept 30, 2007. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. Ford Crown Victoria 2008 drive type:RWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Ford Crown Victoria 2008 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 40 mph. DEALER'S NAME: HERTRICH FLEET SERVICES . DEALER'S TELEPHONE NUMBER: 800 698 9825 . DEALER'S CITY: MILFORD . DEALER'S STATE CODE: DE. DEALER'S ZIPCODE: 19963 .

Ford Crown Victoria 2008 Service Brakes, Hydraulic

Ford Crown Victoria 2008 Service Brakes, Hydraulic Review #10240078

FORD CROWN VICTORIA 2008 car safety problem was reported on Apr 01, 2008.FORD CROWN VICTORIA 2008, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC . tl*the contact owns a 2008 ford crown victoria. while attempting to depress the brake pedal at speeds less than 50 mph, the vehicle would accelerate instead of attempting to stop. the dealer could not find any failures and the issue recurred several times afterwards. while driving 72 mph with the cruise control activated, the vehicle suddenly accelerated to 90 mph until the cruise control was disengaged. the manufacturer advised him to take the vehicle to the dealer for installation of a monitoring system; however, the dealer still could not determine the cause of the failure. the dealer also stated that he was depressing both the brake and accelerator pedals simultaneously, which may have caused the failure. the contact stated that was impossible because the pedals were inches away from each other. the failure mileage was 11,000 and current mileage was 15,460. updated 09/25/08 *bf updated 09/26/08. *jb.0 person(s) were injured. 0 person(s) died.Mileage was 11000 miles. Vehicle Identification Number (VIN):2FAFP74V58X. Ford Crown Victoria 2008 problem was reported in FRUITLAND PARK, FL. Vehicle was purchased on Feb 02, 2008. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 8 CYLINDERS. Ford Crown Victoria 2008 drive type:RWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Ford Crown Victoria 2008 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 50 mph. DEALER'S NAME: KEY SCALES FORD . DEALER'S TELEPHONE NUMBER: 352-787-3511 . DEALER'S CITY: LEESBURG . DEALER'S STATE CODE: FL. DEALER'S ZIPCODE: 34748 .

Ford Crown Victoria 2008 Vehicle Speed Control

Ford Crown Victoria 2008 Vehicle Speed Control Review #10240078

FORD CROWN VICTORIA 2008 car safety problem was reported on Apr 01, 2008.FORD CROWN VICTORIA 2008, manufactured by FORD MOTOR COMPANY had a problem with VEHICLE SPEED CONTROL . tl*the contact owns a 2008 ford crown victoria. while attempting to depress the brake pedal at speeds less than 50 mph, the vehicle would accelerate instead of attempting to stop. the dealer could not find any failures and the issue recurred several times afterwards. while driving 72 mph with the cruise control activated, the vehicle suddenly accelerated to 90 mph until the cruise control was disengaged. the manufacturer advised him to take the vehicle to the dealer for installation of a monitoring system; however, the dealer still could not determine the cause of the failure. the dealer also stated that he was depressing both the brake and accelerator pedals simultaneously, which may have caused the failure. the contact stated that was impossible because the pedals were inches away from each other. the failure mileage was 11,000 and current mileage was 15,460. updated 09/25/08 *bf updated 09/26/08. *jb.0 person(s) were injured. 0 person(s) died.Mileage was 11000 miles. Vehicle Identification Number (VIN):2FAFP74V58X. Ford Crown Victoria 2008 problem was reported in FRUITLAND PARK, FL. Vehicle was purchased on Feb 02, 2008. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 8 CYLINDERS. Ford Crown Victoria 2008 drive type:RWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Ford Crown Victoria 2008 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 50 mph. DEALER'S NAME: KEY SCALES FORD . DEALER'S TELEPHONE NUMBER: 352-787-3511 . DEALER'S CITY: LEESBURG . DEALER'S STATE CODE: FL. DEALER'S ZIPCODE: 34748 .

Ford Crown Victoria 2008 Vehicle Speed Control Review #10253036

FORD CROWN VICTORIA 2008 car safety problem was reported on Sept 23, 2008.FORD CROWN VICTORIA 2008, manufactured by FORD MOTOR COMPANY had a problem with VEHICLE SPEED CONTROL . police car 2008 crown victoria was southbound through intersection and struck by an eastbound vehicle. the crown vic accelerated post impact by a stuck throttle linkage and led to two additional collisions. event data recorder download confirmed the officer complaint of the stuck throttle. initial impact speed was 22 mph, post impact accelerated to 25 for head on with stopped van in oncoming lane pushing van back and sideways. cv continued past at a speed of 16 mph to strike impala headon and accelerated to 20 mph before officer could stop. throttle at 100% while in neutral and high rpms (4600) until officer shut engine off. ccso report number s08-14160. *tr.Vehicle was involved in a crash. 1 person(s) were injured. Mileage was 4956 miles. Vehicle Identification Number (VIN):2FAHP71V58X. Ford Crown Victoria 2008 problem was reported in VANCOUVER, WA. Accident was reported to Police. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 22 mph.

Ford Crown Victoria 2008 Structure

Ford Crown Victoria 2008 Structure Review #10269890

FORD CROWN VICTORIA 2008 car safety problem was reported on May 21, 2009.FORD CROWN VICTORIA 2008, manufactured by FORD MOTOR COMPANY had a problem with STRUCTURE . 2008 ford crown victoria police interceptor: brake pedal is too close to the accelerator. often, both pedals are pressed inadvertently when trying to stop. i personally know several police officers who report having this problem when driving '08 crown victorias. these same police officers, myself included, report this problem is unique to the '08 crown victoria and does not exist with older models. *tr.Vehicle was involved in a crash. Mileage was 11000 miles. Ford Crown Victoria 2008 problem was reported in CHESHIRE, MA. Accident was reported to Police. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 10 mph.

Ford Crown Victoria 2008 Engine And Engine Cooling Engine

Ford Crown Victoria 2008 Engine And Engine Cooling Engine Review #10276869

FORD CROWN VICTORIA 2008 car safety problem was reported on June 29, 2009.FORD CROWN VICTORIA 2008, manufactured by FORD MOTOR COMPANY had a problem with ENGINE AND ENGINE COOLING:ENGINE . we have several ford crown vic police cars in our agency and we are having troubles with the cooling fans breaking down. other agencies are also having the same troubles. the cost for these repairs are over $600.00 per squad and with our tight budget these costs are adding up. is there any active service bulletin or recalls on these parts? *tr.Mileage was 62778 miles. Vehicle Identification Number (VIN):2FAFP71VX8X. Ford Crown Victoria 2008 problem was reported in GLENDALE, WI. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Ford Crown Victoria 2008 Electrical System Wiring

Ford Crown Victoria 2008 Electrical System Wiring Review #10292772

FORD CROWN VICTORIA 2008 car safety problem was reported on June 25, 2009.FORD CROWN VICTORIA 2008, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM:WIRING . 2008 ford crown victoria has a problem with unintended acceleration. *nj the consumer stated the vehicle accelerated 3 times with no warning. the consumer stated the problem happened when the vehicle was started and placed into drive and driven approximately 150 feet. the rpm's increased without the accelerator being applied. the consumer applied the brake and the rpm's returned to normal after about 30 seconds. the cruise control was not engaged. in june 2009, the consumer took the vehicle to the dealer and they replaced the throttle body and air intake. however, on august 13, 2009 the vehicle accelerated suddenly as it did previously. the consumer took the vehicle back to the dealer and they found 2 pin holes in the basic wiring harness. the consumer was informed the pin holes were a result of the wiring harness being installed upside down which caused tension and rubbing on the wire insulation until the bare wires were exposed which caused a short in the wiring harness. the dealer repaired the wires, but did not replace any parts. to date no further problems have occurred. *jb.Vehicle Identification Number (VIN):2FAFP74V08X. Ford Crown Victoria 2008 problem was reported in STAFFORD, VA. Vehicle was purchased on Feb 29, 2008. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Vehicle had 8 CYLINDERS. Ford Crown Victoria 2008 drive type:RWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: BIFUEL. Ford Crown Victoria 2008 TRANSMISSION TYPE: AUTO. DEALER'S NAME: PURVIS FORD . DEALER'S CITY: FREDERICKSBURG . DEALER'S STATE CODE: VA. DEALER'S ZIPCODE: 22402 .

Ford Crown Victoria 2008 Vehicle Speed Control

Ford Crown Victoria 2008 Vehicle Speed Control Review #10314349

FORD CROWN VICTORIA 2008 car safety problem was reported on Oct 26, 2009.FORD CROWN VICTORIA 2008, manufactured by FORD MOTOR COMPANY had a problem with VEHICLE SPEED CONTROL . 2008 ford crown victoria. consumer states unintended acceleration and no response to brake pedal. *tgw the consumer stated when he attempted to apply the brakes to make a turn, the vehicle did not stop and the engine began to rev at a high rate. he had to pump the brakes in order to get the vehicle to stop. *jb the consumer stated the same problem has since happened a second time. the dealer was unable to find a problem. updated 09/22/10*jb .Vehicle Identification Number (VIN):2FAFP74VX8X. Ford Crown Victoria 2008 problem was reported in ATTAPULGUS, GA. Vehicle was purchased on Aug 15, 2008. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. Ford Crown Victoria 2008 drive type:RWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: BIFUEL. DEALER'S NAME: RIVER BEND FORD . DEALER'S CITY: BAINBRIDGE . DEALER'S STATE CODE: GA. DEALER'S ZIPCODE: 39818 .

Ford Crown Victoria 2008 Steering

Ford Crown Victoria 2008 Steering Review #10347391

FORD CROWN VICTORIA 2008 car safety problem was reported on Aug 04, 2010.FORD CROWN VICTORIA 2008, manufactured by FORD MOTOR COMPANY had a problem with STEERING . the steering column begins to separate in the upper portion of the steering column tube. the steering wheel binds and is very difficult to move from left to right. we have experienced in a like vehicle that the shafts in the upper column actually separated and the vehicle had no mechanical connection to the front wheels. the operator was able to bring the vehicle to a safe stop but they had just begun to accelerate from a traffic light when the shafts separated and the vehicle speed was minimal. *tr.Mileage was 35700 miles. Vehicle Identification Number (VIN):2FAFP71V08X. Ford Crown Victoria 2008 problem was reported in MIAMI, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Ford Crown Victoria 2008 Steering Review #10347404

FORD CROWN VICTORIA 2008 car safety problem was reported on May 18, 2010.FORD CROWN VICTORIA 2008, manufactured by FORD MOTOR COMPANY had a problem with STEERING . the steering column in this vehicle separated in the upper portion of the steering column tube. the steering wheel binds as reported at first and is very difficult to steer from left to right. when the upper steering column shafts separated from this vehicle it had no mechanical connection to the front wheels. the operator was able to bring the vehicle to a safe stop but they had just begun to accelerate from a traffic light when the shafts separated and the vehicles speed was minimal. *tr.Mileage was 39955 miles. Vehicle Identification Number (VIN):2FAFP71V48X. Ford Crown Victoria 2008 problem was reported in MIAMI, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Ford Crown Victoria 2008 Vehicle Speed Control

Ford Crown Victoria 2008 Vehicle Speed Control Review #10470556

FORD CROWN VICTORIA 2008 car safety problem was reported on Aug 11, 2012.FORD CROWN VICTORIA 2008, manufactured by FORD MOTOR COMPANY had a problem with VEHICLE SPEED CONTROL . tl* the contact owns a 2008 ford crown victoria. the contact stated that while driving 45 mph the accelerator pedal became stuck on the floorboard when it was depress. the contact mentioned that the failure recurred multiple times. the vehicle was taken to an independent mechanic who diagnosed that the throttle body was defective and needed to be replaced. the manufacturer was made aware of the failure and a report was filed. the failure mileage was 40,714. .0 person(s) were injured. 0 person(s) died.Mileage was 40714 miles. Vehicle Identification Number (VIN):2FAFP71V58X. Ford Crown Victoria 2008 problem was reported in BELSANO, PA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 45 mph.

Ford Crown Victoria 2008 Steering

Ford Crown Victoria 2008 Steering Review #10471184

FORD CROWN VICTORIA 2008 car safety problem was reported on June 08, 2012.FORD CROWN VICTORIA 2008, manufactured by Ford Motor Company had a problem with STEERING . tl* the contact owns a 2008 ford crown victoria. the contact stated that the steering knuckle and the engine compartment were fractured. the vehicle was taken to the dealer who stated that the plastic of the steering knuckle was defective and offered to replace the plastic with a rubber band. the vehicle was repaired. the manufacturer was notified of the failure and offered no assistance. the failure was 98,000 and the current mileage was 106.000. *update submitted...i am a deputy sheriff and on the date of this incident, i was traveling at 15 mph. i noticed a granular feeling in the steering column and the steering wheel had no resistance. the steering column wheel could be spun continuously in either direction without affecting the vehicles direction. this is a very dangerous situation and could've been deadly for me and others on the road that day if my speed was faster than what it was..0 person(s) were injured. 0 person(s) died.Mileage was 98000 miles. Vehicle Identification Number (VIN):2FAFP71V68X. Ford Crown Victoria 2008 problem was reported in ALBERT LEA, MN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 15 mph.

Ford Crown Victoria 2008 Power Train

Ford Crown Victoria 2008 Power Train Review #10475954

FORD CROWN VICTORIA 2008 car safety problem was reported on Aug 27, 2012.FORD CROWN VICTORIA 2008, manufactured by Ford Motor Company had a problem with POWER TRAIN . driver felt resistance in steering and heard noise under dash. drove car for some until it would not shift into park then brought in for service. technician examining vehicle noticed small plastic parts on floor under steering column and found the lower bushing out of tube. steering shaft was still connected. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 95254 miles. Vehicle Identification Number (VIN):2FAHP71V68X. Ford Crown Victoria 2008 problem was reported in HARRISBURG, PA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. FUEL TYPE: BIFUEL. VEHICLE SPEED: 10 mph.

Ford Crown Victoria 2008 Steering

Ford Crown Victoria 2008 Steering Review #10475954

FORD CROWN VICTORIA 2008 car safety problem was reported on Aug 27, 2012.FORD CROWN VICTORIA 2008, manufactured by Ford Motor Company had a problem with STEERING . driver felt resistance in steering and heard noise under dash. drove car for some until it would not shift into park then brought in for service. technician examining vehicle noticed small plastic parts on floor under steering column and found the lower bushing out of tube. steering shaft was still connected. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 95254 miles. Vehicle Identification Number (VIN):2FAHP71V68X. Ford Crown Victoria 2008 problem was reported in HARRISBURG, PA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. FUEL TYPE: BIFUEL. VEHICLE SPEED: 10 mph.

Ford Crown Victoria 2008 Steering Review #10477192

FORD CROWN VICTORIA 2008 car safety problem was reported on Sept 25, 2012.FORD CROWN VICTORIA 2008, manufactured by Ford Motor Company had a problem with STEERING . tl* the contact owns a 2008 ford crown victoria. the contact stated that while driving 5 mph, the power steering assist failed. the contact stated that he attempted to turn the vehicle but instead, heard a loud noise as the wheel began to move independently. the vehicle was towed to a repair shop for inspection where they stated that the steering column had become disassembled. the vehicle was not repaired. the manufacturer was notified of the failure. the failure mileage was 96,000. the vin was unavailable. .0 person(s) were injured. 0 person(s) died.Mileage was 96000 miles. Vehicle Identification Number (VIN):2FAFP71V68X. Ford Crown Victoria 2008 problem was reported in COCONUT CREEK, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 5 mph.

Ford Crown Victoria 2008 Suspension

Ford Crown Victoria 2008 Suspension Review #10478030

FORD CROWN VICTORIA 2008 car safety problem was reported on Sept 26, 2012.FORD CROWN VICTORIA 2008, manufactured by Ford Motor Company had a problem with SUSPENSION . inspection found dislocated bushing. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 55900 miles. Vehicle Identification Number (VIN):2FAHP71V28X. Ford Crown Victoria 2008 problem was reported in HARRISBURG, PA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. FUEL TYPE: BIFUEL. VEHICLE SPEED: 0 mph.

Ford Crown Victoria 2008 Steering

Ford Crown Victoria 2008 Steering Review #10478030

FORD CROWN VICTORIA 2008 car safety problem was reported on Sept 26, 2012.FORD CROWN VICTORIA 2008, manufactured by Ford Motor Company had a problem with STEERING . inspection found dislocated bushing. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 55900 miles. Vehicle Identification Number (VIN):2FAHP71V28X. Ford Crown Victoria 2008 problem was reported in HARRISBURG, PA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. FUEL TYPE: BIFUEL. VEHICLE SPEED: 0 mph.

Ford Crown Victoria 2008 Suspension

Ford Crown Victoria 2008 Suspension Review #10478034

FORD CROWN VICTORIA 2008 car safety problem was reported on Sept 26, 2012.FORD CROWN VICTORIA 2008, manufactured by Ford Motor Company had a problem with SUSPENSION . inspection found dislocated bushing. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 58578 miles. Vehicle Identification Number (VIN):2FAHP71V68X. Ford Crown Victoria 2008 problem was reported in HARRISBURG, PA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph.

Ford Crown Victoria 2008 Steering

Ford Crown Victoria 2008 Steering Review #10478034

FORD CROWN VICTORIA 2008 car safety problem was reported on Sept 26, 2012.FORD CROWN VICTORIA 2008, manufactured by Ford Motor Company had a problem with STEERING . inspection found dislocated bushing. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 58578 miles. Vehicle Identification Number (VIN):2FAHP71V68X. Ford Crown Victoria 2008 problem was reported in HARRISBURG, PA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph.

Ford Crown Victoria 2008 Steering Review #10478045

FORD CROWN VICTORIA 2008 car safety problem was reported on Sept 26, 2012.FORD CROWN VICTORIA 2008, manufactured by Ford Motor Company had a problem with STEERING . inspection found dislocated bushing. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 48611 miles. Vehicle Identification Number (VIN):2FAHP71V18X. Ford Crown Victoria 2008 problem was reported in HARRISBURG, PA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph.

Ford Crown Victoria 2008 Suspension

Ford Crown Victoria 2008 Suspension Review #10478045

FORD CROWN VICTORIA 2008 car safety problem was reported on Sept 26, 2012.FORD CROWN VICTORIA 2008, manufactured by Ford Motor Company had a problem with SUSPENSION . inspection found dislocated bushing. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 48611 miles. Vehicle Identification Number (VIN):2FAHP71V18X. Ford Crown Victoria 2008 problem was reported in HARRISBURG, PA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph.

Ford Crown Victoria 2008 Suspension Review #10478047

FORD CROWN VICTORIA 2008 car safety problem was reported on Sept 26, 2012.FORD CROWN VICTORIA 2008, manufactured by Ford Motor Company had a problem with SUSPENSION . inspection found dislocated bushing. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 65893 miles. Vehicle Identification Number (VIN):2FAHP71V48X. Ford Crown Victoria 2008 problem was reported in HARRISBURG, PA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph.

Ford Crown Victoria 2008 Steering

Ford Crown Victoria 2008 Steering Review #10478047

FORD CROWN VICTORIA 2008 car safety problem was reported on Sept 26, 2012.FORD CROWN VICTORIA 2008, manufactured by Ford Motor Company had a problem with STEERING . inspection found dislocated bushing. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 65893 miles. Vehicle Identification Number (VIN):2FAHP71V48X. Ford Crown Victoria 2008 problem was reported in HARRISBURG, PA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph.

Ford Crown Victoria 2008 Steering Review #10479893

FORD CROWN VICTORIA 2008 car safety problem was reported on Oct 10, 2012.FORD CROWN VICTORIA 2008, manufactured by Ford Motor Company had a problem with STEERING . on wednesday, october 10 at approximately 3:45 pm trooper was traveling on reservoir avenue in the city of cranston. as the trooper approached the on-ramp for route 10 south he attempted to turn onto the ramp. as he did so he heard a loud snap and the steering wheel kept turning without turning the front wheels. he applied the brakes and went up onto the curbing next to the ramp. when he came to a stop the horn was sounding and the lights and siren were also going on and off. the cruiser in question is a 2008 and had not experienced any serious problems until this. it was towed to tasca ford and they advised that the steering column had snapped and affected the wiring in the vehicle. the vehicle is currently at tasca awaiting repairs. thank you for your assistance. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 98430 miles. Vehicle Identification Number (VIN):2FAFP71V48X. Ford Crown Victoria 2008 problem was reported in N SCITUATE, RI. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. FUEL TYPE: BIFUEL. VEHICLE SPEED: 35 mph.

Ford Crown Victoria 2008 Steering Review #10532459

FORD CROWN VICTORIA 2008 car safety problem was reported on July 19, 2013.FORD CROWN VICTORIA 2008, manufactured by Ford Motor Company had a problem with STEERING . note: this is a police car. officer was driving approximately 40mph when suddenly, without warning, the steering wheel had a lot of play in it, which became more apparent when the steering wheel did a complete 360 degree turn while the vehicle kept going straight. he was able to turn the wheel hard enough at the last second and landed onto a homeowners driveway. unit was towed to the fleet department where the unit is based. officer did not have any warning that this was about to happen, no popping, grinding or hard steering prior to the event. i am the lead fleet technician, ase master and advanced certified & 30 years experience. findings upon inspection: i found the splined steering shafts in the column had separated and the light green plastic bushing at the lower section of the column was broken, the splined black hard plastic on the splined shaft was chewed up on the end (unknown if these occurred after shaft separation). after inspection, the column was reassembled and bench tested. no problem was noted. no visible cracks, abnormal wear or looseness noted. new ford steering column and clock-spring installed, alignment and unit was put back in service. the faulty column is on hand. *tr .Vehicle was involved in a crash. 0 person(s) were injured. 0 person(s) died.Mileage was 88140 miles. Vehicle Identification Number (VIN):2FAHP71V58X. Ford Crown Victoria 2008 problem was reported in PARADISE VALLEY, AZ. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. FUEL TYPE: BIFUEL. VEHICLE SPEED: 40 mph.

Ford Crown Victoria 2008 Steering Review #10549941

FORD CROWN VICTORIA 2008 car safety problem was reported on Aug 07, 2013.FORD CROWN VICTORIA 2008, manufactured by Ford Motor Company had a problem with STEERING . tl* the contact owns 2008 ford crown victoria. the contact stated that while driving approximately 30 mph, there was a loss of steering control. the contact then unexpectedly crashed into another vehicle. the driver and front seat passenger sustained injuries to the neck, back and body. a police report was filed. the vehicle was towed to an independent auto center for investigation. three weeks after the crash, the contact received notification of nhtsa campaign id number: 13v385000 (steering). the manufacturer was notified of the problem. the approximate failure mileage was 180,000. .Vehicle was involved in a crash. 2 person(s) were injured. 0 person(s) died.Mileage was 180000 miles. Vehicle Identification Number (VIN):2FAHP71V58X. Ford Crown Victoria 2008 problem was reported in ELGIN, IL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 30 mph.

Ford Crown Victoria 2008 Steering Review #10559533

FORD CROWN VICTORIA 2008 car safety problem was reported on Oct 12, 2013.FORD CROWN VICTORIA 2008, manufactured by Ford Motor Company had a problem with STEERING . vehicle suddenly jerked to the left causing it to flip over and damaging two utility poles and bringing down power lines. *tr.Vehicle was involved in a crash. 0 person(s) were injured. 0 person(s) died.Mileage was 76000 miles. Vehicle Identification Number (VIN):2FAFP71V08X. Ford Crown Victoria 2008 problem was reported in SIOUX CITY, IA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. FUEL TYPE: GAS.

Ford Crown Victoria 2008 Suspension

Ford Crown Victoria 2008 Suspension Review #10579097

FORD CROWN VICTORIA 2008 car safety problem was reported on Sept 04, 2013.FORD CROWN VICTORIA 2008, manufactured by Ford Motor Company had a problem with SUSPENSION . tl* the contact owns a 2008 ford crown victoria. the contact stated that while driving approximately 40 mph, a loud roaring noise emitted underneath the vehicle. the vehicle was taken to an independent mechanic who stated that both front wheel bearings and hub assemblies needed to be replaced. the vehicle was repaired. there was a recall related to the failure under nhtsa campaign id number 07v270000 (suspension) but the vin was not included. the manufacturer was notified of the problem. the approximate failure mileage was 140,000. updated 07/28/14 ma.0 person(s) were injured. 0 person(s) died.Mileage was 140000 miles. Vehicle Identification Number (VIN):2FAFP71V68X. Ford Crown Victoria 2008 problem was reported in DELEON SPRINGS, FL. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 8 CYLINDERS. Ford Crown Victoria 2008 drive type:RWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: BIFUEL. Ford Crown Victoria 2008 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 40 mph. DEALER'S NAME: SMYRNA AUTO REPAIR . DEALER'S TELEPHONE NUMBER: 427-8254 . DEALER'S CITY: NEW SMYRNA . DEALER'S STATE CODE: FL. DEALER'S ZIPCODE: 32168 .

Ford Crown Victoria 2008 Steering

Ford Crown Victoria 2008 Steering Review #10625822

FORD CROWN VICTORIA 2008 car safety problem was reported on July 20, 2014.FORD CROWN VICTORIA 2008, manufactured by Ford Motor Company had a problem with STEERING . corrected description for complaint 10618222: driving on highway at 70 m.p.h., noticed increasing "play" in steering wheel; stopped at rest area. when ready to leave, started to back out and turned steering wheel less than 1/2 turn to the left. i heard/felt something "pop," at which point the steering wheel would spin freely and no longer affected the front wheels--complete loss of steering control. had car towed to a ford dealer, who confirmed the steering column had broken components. the dealer also noted that this vehicle had previously received repairs to the steering under ford recall 13s08. ford dealer stated they had contacted ford motor company about covering all or part of the repair, but "corporate had refused." the expensive repair ($1,093.60) was all mine. can 't help but wonder if the recall repair went far enough..0 person(s) were injured. 0 person(s) died.Mileage was 146800 miles. Vehicle Identification Number (VIN):2FAFP71V88X. Ford Crown Victoria 2008 problem was reported in CEDAR LAKE, IN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Ford Crown Victoria 2008 Air Bags

Ford Crown Victoria 2008 Air Bags Review #10637557

FORD CROWN VICTORIA 2008 car safety problem was reported on Feb 07, 2013.FORD CROWN VICTORIA 2008, manufactured by Ford Motor Company had a problem with AIR BAGS . i was a passenger in the above vehicle. on 02/07/2013 the car hydro plained from the road and the driver lost control of the car. it began spinning around and left the road, the car hit a fence and twirled around and slammed rear end first into a pole. the impact was so hard it caused the front seats to break and we both fell back into the back of car. the rear window shattered and glass flew inside the entire car. the trunk was crammed into the back seat. the air bags did not deploy at the time of impact. the whole dash and console fell down into out laps and the stereo ejected from the dash and flew into the back of the car. a foriegn object cut me on the right side of my face around my ear which cause me to require stiches and left me with slight nerve damage and slight jaw paralysis of the right side of my face..Vehicle was involved in a crash. 1 person(s) were injured. 0 person(s) died.Ford Crown Victoria 2008 problem was reported in SELMA, AL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 55 mph.

Ford Crown Victoria 2008 Steering

Ford Crown Victoria 2008 Steering Review #10660688

FORD CROWN VICTORIA 2008 car safety problem was reported on Aug 06, 2011.FORD CROWN VICTORIA 2008, manufactured by Ford Motor Company had a problem with STEERING . unmarked police crown victoria sedan traveling in left lane of 4-lane, grass median-separated highway with posted speed limit 55 mph. police officer driver deceased in crash. witnesses report: after entering highway, vehicle accelerated to high rate of speed; in vicinity police median turnaround, police strobe lights went on; vehicle started wobbling and moving gradually to left in straight path. event data recorder indicated brakes applied and vehicle slowed before colliding with concrete bridge underpass abutment. small grass fire extinguished around front-end of vehicle. cursory vehicle examination on 09/15/11 reports: airbag deployed, seat belt locked up due to impact, unable to check brake pedal, unable to check front brakes, and bad steering (no further details on condition steering parts). .Vehicle was involved in a crash. Vehicle was on fire. 0 person(s) were injured. 1 person(s) died.Vehicle Identification Number (VIN):2FAHP71V28X. Ford Crown Victoria 2008 problem was reported in PITTSBURGH, PA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 105 mph.

Ford Crown Victoria 2008 Power Train

Ford Crown Victoria 2008 Power Train Review #10660688

FORD CROWN VICTORIA 2008 car safety problem was reported on Aug 06, 2011.FORD CROWN VICTORIA 2008, manufactured by Ford Motor Company had a problem with POWER TRAIN . unmarked police crown victoria sedan traveling in left lane of 4-lane, grass median-separated highway with posted speed limit 55 mph. police officer driver deceased in crash. witnesses report: after entering highway, vehicle accelerated to high rate of speed; in vicinity police median turnaround, police strobe lights went on; vehicle started wobbling and moving gradually to left in straight path. event data recorder indicated brakes applied and vehicle slowed before colliding with concrete bridge underpass abutment. small grass fire extinguished around front-end of vehicle. cursory vehicle examination on 09/15/11 reports: airbag deployed, seat belt locked up due to impact, unable to check brake pedal, unable to check front brakes, and bad steering (no further details on condition steering parts). .Vehicle was involved in a crash. Vehicle was on fire. 0 person(s) were injured. 1 person(s) died.Vehicle Identification Number (VIN):2FAHP71V28X. Ford Crown Victoria 2008 problem was reported in PITTSBURGH, PA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 105 mph.

Ford Crown Victoria 2008 Service Brakes

Ford Crown Victoria 2008 Service Brakes Review #10660688

FORD CROWN VICTORIA 2008 car safety problem was reported on Aug 06, 2011.FORD CROWN VICTORIA 2008, manufactured by Ford Motor Company had a problem with SERVICE BRAKES . unmarked police crown victoria sedan traveling in left lane of 4-lane, grass median-separated highway with posted speed limit 55 mph. police officer driver deceased in crash. witnesses report: after entering highway, vehicle accelerated to high rate of speed; in vicinity police median turnaround, police strobe lights went on; vehicle started wobbling and moving gradually to left in straight path. event data recorder indicated brakes applied and vehicle slowed before colliding with concrete bridge underpass abutment. small grass fire extinguished around front-end of vehicle. cursory vehicle examination on 09/15/11 reports: airbag deployed, seat belt locked up due to impact, unable to check brake pedal, unable to check front brakes, and bad steering (no further details on condition steering parts). .Vehicle was involved in a crash. Vehicle was on fire. 0 person(s) were injured. 1 person(s) died.Vehicle Identification Number (VIN):2FAHP71V28X. Ford Crown Victoria 2008 problem was reported in PITTSBURGH, PA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 105 mph.

Ford Crown Victoria 2008 Steering

Ford Crown Victoria 2008 Steering Review #10669252

FORD CROWN VICTORIA 2008 car safety problem was reported on Jan 01, 2014.FORD CROWN VICTORIA 2008, manufactured by Ford Motor Company had a problem with STEERING . tl* the contact owns a 2008 ford crown victoria. the contact stated that the upper and lower bearings separated from the vehcle, causing the power steering to fail. the vehicle was not diagnosed or repaired. the contact referenced nhtsa campaign number: 13v385000 (steering). the manufacturer was made aware of the failure. the failure mileage was 117,000. .0 person(s) were injured. 0 person(s) died.Mileage was 117000 miles. Vehicle Identification Number (VIN):2FAFP71V08X. Ford Crown Victoria 2008 problem was reported in WATERLOO, NY. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Ford Crown Victoria 2008 Suspension Front Wheel Bearing

Ford Crown Victoria 2008 Suspension Front Wheel Bearing Review #10669252

FORD CROWN VICTORIA 2008 car safety problem was reported on Jan 01, 2014.FORD CROWN VICTORIA 2008, manufactured by Ford Motor Company had a problem with SUSPENSION:FRONT:WHEEL BEARING . tl* the contact owns a 2008 ford crown victoria. the contact stated that the upper and lower bearings separated from the vehcle, causing the power steering to fail. the vehicle was not diagnosed or repaired. the contact referenced nhtsa campaign number: 13v385000 (steering). the manufacturer was made aware of the failure. the failure mileage was 117,000. .0 person(s) were injured. 0 person(s) died.Mileage was 117000 miles. Vehicle Identification Number (VIN):2FAFP71V08X. Ford Crown Victoria 2008 problem was reported in WATERLOO, NY. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Air Bags 1 Review(s)

Electrical System Wiring 1 Review(s)

Engine And Engine Cooling Engine 1 Review(s)

Power Train 2 Review(s)

Seat Belts Front Buckle Assembly 1 Review(s)

Service Brakes 1 Review(s)

Service Brakes, Hydraulic 1 Review(s)

Steering 16 Review(s)

Structure 1 Review(s)

Suspension 5 Review(s)

Suspension Front Wheel Bearing 1 Review(s)

Vehicle Speed Control 4 Review(s)