Car-and-Safety.com
Ford Crown Victoria 1995 Safety Reports and Reviews
Ford Crown Victoria 1995 Reviews
Ford Crown Victoria 1995 Seats Front Assembly ReclinerFord Crown Victoria 1995 Seats Front Assembly Recliner Review #961195 FORD CROWN VICTORIA 1995 car safety problem was reported on Feb 13, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SEATS:FRONT ASSEMBLY:RECLINER . vehicle was at complete stop hit at 6:00 position, driver side collapsed into recline position causing injuries. tt.Vehicle was involved in a crash. 1 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP73W9SX. Ford Crown Victoria 1995 problem was reported in BLOOMFIELD H, MI. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Structure Body Trunk LidFord Crown Victoria 1995 Structure Body Trunk Lid Review #963867 FORD CROWN VICTORIA 1995 car safety problem was reported on Feb 01, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STRUCTURE:BODY:TRUNK LID . when hitting a bump there is a noise in the rear passenger side trunk. tt.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP74W1SX. Ford Crown Victoria 1995 problem was reported in MELROSE PARK, 00. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Vehicle Speed ControlFord Crown Victoria 1995 Vehicle Speed Control Review #966352 FORD CROWN VICTORIA 1995 car safety problem was reported on May 31, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with VEHICLE SPEED CONTROL . the vehicle suddenly accelerated after pulling out of a drive way at approximately 20mph, vehicle stopped after hitting a pole and both air bags deployed. tt.Vehicle was involved in a crash. 2 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP74W1SX. Ford Crown Victoria 1995 problem was reported in ROYAL OAK, MI. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Fuel System, Gasoline Delivery Fuel PumpFord Crown Victoria 1995 Fuel System, Gasoline Delivery Fuel Pump Review #966509 FORD CROWN VICTORIA 1995 car safety problem was reported on June 02, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP . fuel pump failed, vehicle stalls unexpectedly which could cause an accident. tt.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP73W9SX. Ford Crown Victoria 1995 problem was reported in EAST FARMING, NY. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Air Bags FrontalFord Crown Victoria 1995 Air Bags Frontal Review #967024 FORD CROWN VICTORIA 1995 car safety problem was reported on Dec 31, 1994.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with AIR BAGS:FRONTAL . frontal collision, impact 12:00, speed 50 mph, driver's air bag did not deploy . tt.Vehicle was involved in a crash. 1 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP74W7SX. Ford Crown Victoria 1995 problem was reported in OGDEN, UT. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Air Bags Frontal Review #967024 FORD CROWN VICTORIA 1995 car safety problem was reported on Dec 31, 1994.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with AIR BAGS:FRONTAL . frontal collision, impact 12:00, speed 50 mph, passenger's air bag failed to deploy. *ak.Vehicle was involved in a crash. 1 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP74W7SX. Ford Crown Victoria 1995 problem was reported in OGDEN, UT. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Hydraulic Power Assist SystemFord Crown Victoria 1995 Steering Hydraulic Power Assist System Review #971038 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:HYDRAULIC POWER ASSIST SYSTEM . police package vehicle speed sensitive power steering; over 100 mph, steering appears to lock/stiff. please describe details. tt.0 person(s) were injured. 0 person(s) died.Ford Crown Victoria 1995 problem was reported in BILLINGS, MT. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Wheels Lugs/nuts/boltsFord Crown Victoria 1995 Wheels Lugs/nuts/bolts Review #971222 FORD CROWN VICTORIA 1995 car safety problem was reported on Aug 28, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with WHEELS:LUGS/NUTS/BOLTS . defective wheel lugs, nuts and bolt fell off causing potential risk of loss of vehicle control. please describe details. tt.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP74W3SX. Ford Crown Victoria 1995 problem was reported in WHITTIER, CA. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Hydraulic Power Assist SystemFord Crown Victoria 1995 Steering Hydraulic Power Assist System Review #972337 FORD CROWN VICTORIA 1995 car safety problem was reported on Sept 20, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:HYDRAULIC POWER ASSIST SYSTEM . power steering failure, when making turns the steering wheel will freeze. tt.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP73W4SX. Ford Crown Victoria 1995 problem was reported in HERMITAGE, TN. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Air Bags FrontalFord Crown Victoria 1995 Air Bags Frontal Review #972582 FORD CROWN VICTORIA 1995 car safety problem was reported on Sept 23, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with AIR BAGS:FRONTAL . passengers airbag did not deploy upon impact; airbags deployed after officer existed vehicle; driver's shoulder/seat belt did not hold; hit a tractor trailer.Vehicle was involved in a crash. 1 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W2SX. Ford Crown Victoria 1995 problem was reported in NAPLES, FL. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Seat Belts Front WebbingFord Crown Victoria 1995 Seat Belts Front Webbing Review #972582 FORD CROWN VICTORIA 1995 car safety problem was reported on Sept 23, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SEAT BELTS:FRONT:WEBBING . passengers airbag did not deploy upon impact; airbags deployed after officer existed vehicle; driver's shoulder/seat belt did not hold; hit a tractor trailer.Vehicle was involved in a crash. 1 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W2SX. Ford Crown Victoria 1995 problem was reported in NAPLES, FL. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Air Bags FrontalFord Crown Victoria 1995 Air Bags Frontal Review #972582 FORD CROWN VICTORIA 1995 car safety problem was reported on Sept 23, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with AIR BAGS:FRONTAL . drivers airbag did not deploy upon impact; airbags deployed after officer existed vehicle; driver's shoulder/seat belt did not hold; hit a tractor trailer.Vehicle was involved in a crash. 1 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W2SX. Ford Crown Victoria 1995 problem was reported in NAPLES, FL. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Air Bags Review #482006 FORD CROWN VICTORIA 1995 car safety problem was reported on Dec 16, 1994.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with AIR BAGS . air bag deployment was violent during accident, causing injuries to both driver and passenger. *skd.Vehicle was involved in a crash. 2 person(s) were injured. 0 person(s) died.Ford Crown Victoria 1995 problem was reported in UNKNOWN, 00. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 SteeringFord Crown Victoria 1995 Steering Review #972920 FORD CROWN VICTORIA 1995 car safety problem was reported on June 01, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING . at high speed going around curve, experience momentary steering loss. (police car). tt.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W4SX. Ford Crown Victoria 1995 problem was reported in BUFFALO, WY. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Communications Horn AssemblyFord Crown Victoria 1995 Communications Horn Assembly Review #481538 FORD CROWN VICTORIA 1995 car safety problem was reported on Feb 21, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with COMMUNICATIONS:HORN ASSEMBLY . size and location of horn button prevents easy access during emergency situations. *skd.0 person(s) were injured. 0 person(s) died.Ford Crown Victoria 1995 problem was reported in DELRAY BEA, FL. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Suspension FrontFord Crown Victoria 1995 Suspension Front Review #973102 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SUSPENSION:FRONT . the alternator gauge,alternator and the window couldn't roll up, there is a popping noise in the front end . tt.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP74WXSX. Ford Crown Victoria 1995 problem was reported in SAUCIER, MS. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Visibility Glass, Side/rearFord Crown Victoria 1995 Visibility Glass, Side/rear Review #973102 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with VISIBILITY:GLASS, SIDE/REAR . the alternator gauge,alternator and the window couldn't roll up, there is a popping noise in the front end . tt.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP74WXSX. Ford Crown Victoria 1995 problem was reported in SAUCIER, MS. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 SuspensionFord Crown Victoria 1995 Suspension Review #973102 FORD CROWN VICTORIA 1995 car safety problem was reported on Sept 14, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SUSPENSION . the alternator gauge,alternator and the window couldn't roll up, there is a popping noise in the front end . tt consumer states the front end collapsed because of the dealerships reuse of a neoprene nut, also there is a popping noise in front end, fuel tank was replaced, alternator replaced, fuel guage on instrument panel replaced,rear passenger window would not roll all the way up, gas lid fills with water, replaced both arm bushings and correct toe end, cassette player does not work properly, and a malfunctioing head light switch.*jb.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP74WXSX. Ford Crown Victoria 1995 problem was reported in SAUCIER, MS. Original Owner. Vehicle was purchased on Jan 14, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Visibility WindshieldFord Crown Victoria 1995 Visibility Windshield Review #973102 FORD CROWN VICTORIA 1995 car safety problem was reported on Sept 14, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with VISIBILITY:WINDSHIELD . the alternator gauge,alternator and the window couldn't roll up, there is a popping noise in the front end . tt consumer states the front end collapsed because of the dealerships reuse of a neoprene nut, also there is a popping noise in front end, fuel tank was replaced, alternator replaced, fuel guage on instrument panel replaced,rear passenger window would not roll all the way up, gas lid fills with water, replaced both arm bushings and correct toe end, cassette player does not work properly, and a malfunctioing head light switch.*jb.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP74WXSX. Ford Crown Victoria 1995 problem was reported in SAUCIER, MS. Original Owner. Vehicle was purchased on Jan 14, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Electrical System Alternator/generator/regulatorFord Crown Victoria 1995 Electrical System Alternator/generator/regulator Review #973102 FORD CROWN VICTORIA 1995 car safety problem was reported on Sept 14, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with ELECTRICAL SYSTEM:ALTERNATOR/GENERATOR/REGULATOR . the alternator gauge,alternator and the window couldn't roll up, there is a popping noise in the front end . tt consumer states the front end collapsed because of the dealerships reuse of a neoprene nut, also there is a popping noise in front end, fuel tank was replaced, alternator replaced, fuel guage on instrument panel replaced,rear passenger window would not roll all the way up, gas lid fills with water, replaced both arm bushings and correct toe end, cassette player does not work properly, and a malfunctioing head light switch.*jb.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP74WXSX. Ford Crown Victoria 1995 problem was reported in SAUCIER, MS. Original Owner. Vehicle was purchased on Jan 14, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Suspension FrontFord Crown Victoria 1995 Suspension Front Review #973102 FORD CROWN VICTORIA 1995 car safety problem was reported on Sept 14, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SUSPENSION:FRONT . the alternator gauge,alternator and the window couldn't roll up, there is a popping noise in the front end . tt consumer states the front end collapsed because of the dealerships reuse of a neoprene nut, also there is a popping noise in front end, fuel tank was replaced, alternator replaced, fuel guage on instrument panel replaced,rear passenger window would not roll all the way up, gas lid fills with water, replaced both arm bushings and correct toe end, cassette player does not work properly, and a malfunctioing head light switch.*jb.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP74WXSX. Ford Crown Victoria 1995 problem was reported in SAUCIER, MS. Original Owner. Vehicle was purchased on Jan 14, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Fuel System, OtherFord Crown Victoria 1995 Fuel System, Other Review #973102 FORD CROWN VICTORIA 1995 car safety problem was reported on Sept 14, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with FUEL SYSTEM, OTHER . the alternator gauge,alternator and the window couldn't roll up, there is a popping noise in the front end . tt consumer states the front end collapsed because of the dealerships reuse of a neoprene nut, also there is a popping noise in front end, fuel tank was replaced, alternator replaced, fuel guage on instrument panel replaced,rear passenger window would not roll all the way up, gas lid fills with water, replaced both arm bushings and correct toe end, cassette player does not work properly, and a malfunctioing head light switch.*jb.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP74WXSX. Ford Crown Victoria 1995 problem was reported in SAUCIER, MS. Original Owner. Vehicle was purchased on Jan 14, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Fuel System, Gasoline Storage Tank AssemblyFord Crown Victoria 1995 Fuel System, Gasoline Storage Tank Assembly Review #973102 FORD CROWN VICTORIA 1995 car safety problem was reported on Sept 14, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY . the alternator gauge,alternator and the window couldn't roll up, there is a popping noise in the front end . tt consumer states the front end collapsed because of the dealerships reuse of a neoprene nut, also there is a popping noise in front end, fuel tank was replaced, alternator replaced, fuel guage on instrument panel replaced,rear passenger window would not roll all the way up, gas lid fills with water, replaced both arm bushings and correct toe end, cassette player does not work properly, and a malfunctioing head light switch.*jb.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP74WXSX. Ford Crown Victoria 1995 problem was reported in SAUCIER, MS. Original Owner. Vehicle was purchased on Jan 14, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Fuel System, Gasoline Storage Tank Assembly Filler Pipe And CapFORD CROWN VICTORIA 1995 car safety problem was reported on Sept 14, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP . the alternator gauge,alternator and the window couldn't roll up, there is a popping noise in the front end . tt consumer states the front end collapsed because of the dealerships reuse of a neoprene nut, also there is a popping noise in front end, fuel tank was replaced, alternator replaced, fuel guage on instrument panel replaced,rear passenger window would not roll all the way up, gas lid fills with water, replaced both arm bushings and correct toe end, cassette player does not work properly, and a malfunctioing head light switch.*jb.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP74WXSX. Ford Crown Victoria 1995 problem was reported in SAUCIER, MS. Original Owner. Vehicle was purchased on Jan 14, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Exterior Lighting Headlights SwitchFord Crown Victoria 1995 Exterior Lighting Headlights Switch Review #973102 FORD CROWN VICTORIA 1995 car safety problem was reported on Sept 14, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with EXTERIOR LIGHTING:HEADLIGHTS:SWITCH . the alternator gauge,alternator and the window couldn't roll up, there is a popping noise in the front end . tt consumer states the front end collapsed because of the dealerships reuse of a neoprene nut, also there is a popping noise in front end, fuel tank was replaced, alternator replaced, fuel guage on instrument panel replaced,rear passenger window would not roll all the way up, gas lid fills with water, replaced both arm bushings and correct toe end, cassette player does not work properly, and a malfunctioing head light switch.*jb.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP74WXSX. Ford Crown Victoria 1995 problem was reported in SAUCIER, MS. Original Owner. Vehicle was purchased on Jan 14, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Equipment Electrical Radio/tape Deck/cd Etc.Ford Crown Victoria 1995 Equipment Electrical Radio/tape Deck/cd Etc. Review #973102 FORD CROWN VICTORIA 1995 car safety problem was reported on Sept 14, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC. . the alternator gauge,alternator and the window couldn't roll up, there is a popping noise in the front end . tt consumer states the front end collapsed because of the dealerships reuse of a neoprene nut, also there is a popping noise in front end, fuel tank was replaced, alternator replaced, fuel guage on instrument panel replaced,rear passenger window would not roll all the way up, gas lid fills with water, replaced both arm bushings and correct toe end, cassette player does not work properly, and a malfunctioing head light switch.*jb.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP74WXSX. Ford Crown Victoria 1995 problem was reported in SAUCIER, MS. Original Owner. Vehicle was purchased on Jan 14, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Unknown Or OtherFord Crown Victoria 1995 Unknown Or Other Review #973102 FORD CROWN VICTORIA 1995 car safety problem was reported on Sept 14, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with UNKNOWN OR OTHER . the alternator gauge,alternator and the window couldn't roll up, there is a popping noise in the front end . tt consumer states the front end collapsed because of the dealerships reuse of a neoprene nut, also there is a popping noise in front end, fuel tank was replaced, alternator replaced, fuel guage on instrument panel replaced,rear passenger window would not roll all the way up, gas lid fills with water, replaced both arm bushings and correct toe end, cassette player does not work properly, and a malfunctioing head light switch.*jb.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP74WXSX. Ford Crown Victoria 1995 problem was reported in SAUCIER, MS. Original Owner. Vehicle was purchased on Jan 14, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Seat Belts Front WebbingFord Crown Victoria 1995 Seat Belts Front Webbing Review #974071 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SEAT BELTS:FRONT:WEBBING . front seat shoulder straps failed. please describe. tt.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP74W3SX. Ford Crown Victoria 1995 problem was reported in TUCSON, AZ. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 SteeringFord Crown Victoria 1995 Steering Review #974289 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING . while driving, at approx. 65-135mph, police package exhibits momentary loss of steering around corners, which causes extreme veering to left or right. tt.0 person(s) were injured. 0 person(s) died.Ford Crown Victoria 1995 problem was reported in BUFFALO, WY. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Communications Horn AssemblyFord Crown Victoria 1995 Communications Horn Assembly Review #483120 FORD CROWN VICTORIA 1995 car safety problem was reported on Aug 22, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with COMMUNICATIONS:HORN ASSEMBLY . horn blew intermittently without anyone being in/around vehicle. *skd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALPT4W4SX. Ford Crown Victoria 1995 problem was reported in GOLETA, CA. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Electrical System Fuses And Circuit BreakersFord Crown Victoria 1995 Electrical System Fuses And Circuit Breakers Review #975810 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with ELECTRICAL SYSTEM:FUSES AND CIRCUIT BREAKERS . recall # 95s24. dealer does not have parts. tt.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP73W4SX. Ford Crown Victoria 1995 problem was reported in EDISON, NJ. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Visibility Power Window Devices And ControlsFord Crown Victoria 1995 Visibility Power Window Devices And Controls Review #975813 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with VISIBILITY:POWER WINDOW DEVICES AND CONTROLS . recall for power windows and head lamps. recall #95s24. tt.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2SALP73W4SX. Ford Crown Victoria 1995 problem was reported in EDISON, NJ. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Exterior Lighting HeadlightsFord Crown Victoria 1995 Exterior Lighting Headlights Review #975813 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with EXTERIOR LIGHTING:HEADLIGHTS . recall for power windows and head lamps. recall #95s24. tt.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2SALP73W4SX. Ford Crown Victoria 1995 problem was reported in EDISON, NJ. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Hydraulic Power Assist SystemFord Crown Victoria 1995 Steering Hydraulic Power Assist System Review #976015 FORD CROWN VICTORIA 1995 car safety problem was reported on Apr 01, 1994.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:HYDRAULIC POWER ASSIST SYSTEM . experiencing intermittent power steering loss. tt.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP73W6SX. Ford Crown Victoria 1995 problem was reported in BINGHAMTON, NY. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Service Brakes, Hydraulic AntilockFord Crown Victoria 1995 Service Brakes, Hydraulic Antilock Review #483404 FORD CROWN VICTORIA 1995 car safety problem was reported on Oct 11, 1994.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SERVICE BRAKES, HYDRAULIC:ANTILOCK . anti-lock brake system failed..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP74W55X. Ford Crown Victoria 1995 problem was reported in VIRGINIA B, VA. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Electrical System WiringFord Crown Victoria 1995 Electrical System Wiring Review #483404 FORD CROWN VICTORIA 1995 car safety problem was reported on Oct 11, 1994.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with ELECTRICAL SYSTEM:WIRING . replaced wiring assembly..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP74W55X. Ford Crown Victoria 1995 problem was reported in VIRGINIA B, VA. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Vehicle Speed ControlFord Crown Victoria 1995 Vehicle Speed Control Review #483404 FORD CROWN VICTORIA 1995 car safety problem was reported on Oct 22, 1994.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with VEHICLE SPEED CONTROL . replaced defective speed sensor. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP74W55X. Ford Crown Victoria 1995 problem was reported in VIRGINIA B, VA. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Fuel System, GasolineFord Crown Victoria 1995 Fuel System, Gasoline Review #976979 FORD CROWN VICTORIA 1995 car safety problem was reported on Dec 21, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with FUEL SYSTEM, GASOLINE . while driving slowly into garage, there was a loud explosion, followed by a fire ball from front to rear; vehicle and garage totaled; cause not yet determined..Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP73WXSX. Ford Crown Victoria 1995 problem was reported in ANNAPOLIS, MD. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Fuel System, Gasoline Storage Tank AssemblyFord Crown Victoria 1995 Fuel System, Gasoline Storage Tank Assembly Review #600640 FORD CROWN VICTORIA 1995 car safety problem was reported on Dec 18, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY . gas tank seal leaked prior to service recall *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP73W7SX. Ford Crown Victoria 1995 problem was reported in HESPERIA, CA. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Fuel System, Gasoline Delivery Hoses, Lines/piping, And FittingsFORD CROWN VICTORIA 1995 car safety problem was reported on Nov 12, 1994.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS . vehicle collided with steel utility pole, causing breakage of fuel line/fire. *sd.Vehicle was on fire. 1 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W3RX. Ford Crown Victoria 1995 problem was reported in CLEVELAND, OH. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Electrical System Wiring Interior/under DashFord Crown Victoria 1995 Electrical System Wiring Interior/under Dash Review #980812 FORD CROWN VICTORIA 1995 car safety problem was reported on Mar 14, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with ELECTRICAL SYSTEM:WIRING:INTERIOR/UNDER DASH . the vehicle started to burn from under the dashboard. it burned itself out. please describe. *ak.Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2MELM7464TX. Ford Crown Victoria 1995 problem was reported in NEWARK, DE. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Engine And Engine Cooling Engine GasolineFord Crown Victoria 1995 Engine And Engine Cooling Engine Gasoline Review #980809 FORD CROWN VICTORIA 1995 car safety problem was reported on Sept 14, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with ENGINE AND ENGINE COOLING:ENGINE:GASOLINE . car was hit head-on and fire broke out in the engine compartment..Vehicle was involved in a crash. Vehicle was on fire. 1 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP73W9PX. Ford Crown Victoria 1995 problem was reported in NEWARK, DE. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Service Brakes, Hydraulic Foundation Components Disc RotorFord Crown Victoria 1995 Service Brakes, Hydraulic Foundation Components Disc Rotor Review #502834 FORD CROWN VICTORIA 1995 car safety problem was reported on Mar 20, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:ROTOR . brake rotors warped/noisey. *sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP73W85S. Ford Crown Victoria 1995 problem was reported in SAN DIEGO, CA. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Service Brakes, Hydraulic Pedals And LinkagesFord Crown Victoria 1995 Service Brakes, Hydraulic Pedals And Linkages Review #502834 FORD CROWN VICTORIA 1995 car safety problem was reported on Mar 20, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES . erratic brake pedal when abs light is on. *sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP73W85S. Ford Crown Victoria 1995 problem was reported in SAN DIEGO, CA. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Vehicle Speed ControlFord Crown Victoria 1995 Vehicle Speed Control Review #502834 FORD CROWN VICTORIA 1995 car safety problem was reported on Mar 20, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with VEHICLE SPEED CONTROL . speed sensor replaced. *sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP73W85S. Ford Crown Victoria 1995 problem was reported in SAN DIEGO, CA. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering LinkagesFord Crown Victoria 1995 Steering Linkages Review #983043 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . pitman arm joint failure; arm separated from drag link, resulting in lost of steering control. please describe details. *ak.0 person(s) were injured. 0 person(s) died.Ford Crown Victoria 1995 problem was reported in HULL, MA. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Service Brakes, Hydraulic AntilockFord Crown Victoria 1995 Service Brakes, Hydraulic Antilock Review #983402 FORD CROWN VICTORIA 1995 car safety problem was reported on Mar 28, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SERVICE BRAKES, HYDRAULIC:ANTILOCK . officer turning corner in vehicle, brakes started pulsating (abs), vehicle hit a home. *ak.Vehicle was involved in a crash. 0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71WXSX. Ford Crown Victoria 1995 problem was reported in CENTRALIA, WA. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering LinkagesFord Crown Victoria 1995 Steering Linkages Review #601374 FORD CROWN VICTORIA 1995 car safety problem was reported on Mar 01, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . pitman arm broke. (7th vehicle483817,503160,601370-601374)*sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W3SX. Ford Crown Victoria 1995 problem was reported in QUINCY, MA. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Linkages Review #601375 FORD CROWN VICTORIA 1995 car safety problem was reported on Mar 25, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . pitman arm broke. (1st vehicle on 503164,601375-601378)*sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71WXSX. Ford Crown Victoria 1995 problem was reported in LOWELL, MA. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Linkages Review #601376 FORD CROWN VICTORIA 1995 car safety problem was reported on Mar 25, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . pitman arm broke.(2nd vehicle on 503164, 601375-601378)*sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W1SX. Ford Crown Victoria 1995 problem was reported in LOWELL, MA. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Linkages Review #601377 FORD CROWN VICTORIA 1995 car safety problem was reported on Apr 11, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . pitman arm broke.(3rd vehicle on 503164, 601375-601378)*sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W1SX. Ford Crown Victoria 1995 problem was reported in LOWELL, MA. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Linkages Review #601378 FORD CROWN VICTORIA 1995 car safety problem was reported on Mar 25, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . pitman arm broke. (4th vehicle on 503164, 601375-601378)*sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W1SX. Ford Crown Victoria 1995 problem was reported in LOWELL, MA. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Linkages Review #601372 FORD CROWN VICTORIA 1995 car safety problem was reported on Mar 01, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . pitman arm broke. (5th vehicle on 483817,503160, 601370-601374)*sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71N5SX. Ford Crown Victoria 1995 problem was reported in QUINCY, MA. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Linkages Review #601373 FORD CROWN VICTORIA 1995 car safety problem was reported on Mar 01, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . pitman arm broke. (6th vehicle on 483817,503160,601370-601372,601374)*sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W35X. Ford Crown Victoria 1995 problem was reported in QUINCY, MA. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Linkages Review #483817 FORD CROWN VICTORIA 1995 car safety problem was reported on Mar 01, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . pitman arm broke. (2nd vehicle on 503160 and 601370,601374)*sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W25X. Ford Crown Victoria 1995 problem was reported in QUINCY, MA. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Linkages Review #601370 FORD CROWN VICTORIA 1995 car safety problem was reported on Mar 01, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . pitman arm broke. (3rd vehicle on 483817,503160,601371-601374)*sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W5SX. Ford Crown Victoria 1995 problem was reported in QUINCY, MA. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Linkages Review #503160 FORD CROWN VICTORIA 1995 car safety problem was reported on Mar 01, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . pitman arm broke. (1st vehicle on 483817,601370-601374)*sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W05X. Ford Crown Victoria 1995 problem was reported in QUINCY, MA. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Linkages Review #503164 FORD CROWN VICTORIA 1995 car safety problem was reported on Mar 25, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . pitman arm broke. (1st vehicle on 601375-601378)*sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W7SX. Ford Crown Victoria 1995 problem was reported in LOWELL, MA. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Linkages Review #601371 FORD CROWN VICTORIA 1995 car safety problem was reported on Mar 01, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . pitman arm broke. (4th vehicle on 483817,503160,601370-601374)*sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W9SX. Ford Crown Victoria 1995 problem was reported in QUINCY, MA. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Linkages Review #984152 FORD CROWN VICTORIA 1995 car safety problem was reported on Apr 25, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . police cars experiencing excessive play in pitman arms, found during inspection of 11 cars. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W3SX. Ford Crown Victoria 1995 problem was reported in CREVECOEUR, MO. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Linkages Review #984153 FORD CROWN VICTORIA 1995 car safety problem was reported on Apr 25, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . police cars experiencing excessive play in pitman arms, found during inspection of 11 cars. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W8SX. Ford Crown Victoria 1995 problem was reported in CREVECOEUR, MO. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Linkages Review #984180 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . during routine maintenance, when pitman arm was greased, joint popped out about 1/2 inches pe96-029. *ak vehicle is maintained per factory specifications by contracted vendor.*jb .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W2SX. Ford Crown Victoria 1995 problem was reported in CLAYTON, MO. Original Owner. Vehicle was purchased on May 16, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Service Brakes, Hydraulic Antilock Abs Warning LightFord Crown Victoria 1995 Service Brakes, Hydraulic Antilock Abs Warning Light Review #484232 FORD CROWN VICTORIA 1995 car safety problem was reported on June 20, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SERVICE BRAKES, HYDRAULIC:ANTILOCK:ABS WARNING LIGHT . other: air bag readiness light comes on/stays on intermittently. *dsh.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP74W2SX. Ford Crown Victoria 1995 problem was reported in SAINT CLAI, MI. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Column Locking Anti-theft DeviceFord Crown Victoria 1995 Steering Column Locking Anti-theft Device Review #484232 FORD CROWN VICTORIA 1995 car safety problem was reported on June 20, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:COLUMN LOCKING:ANTI-THEFT DEVICE . anti-theft alarm system not installed properly, leaving trunk/hood unprotected..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP74W2SX. Ford Crown Victoria 1995 problem was reported in SAINT CLAI, MI. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering LinkagesFord Crown Victoria 1995 Steering Linkages Review #983038 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . pitman arm joint failed; 1) separated from drag link; 2) very loose failing immediately. please describe details. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W9SX. Ford Crown Victoria 1995 problem was reported in FLORISSANT, MO. Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Steering Linkages Review #985501 FORD CROWN VICTORIA 1995 car safety problem was reported on June 11, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . while driving on the highway, steering pitman arn broke, resulting in a steering loss.please describe details. *a.Ford Crown Victoria 1995 problem was reported in ALPENA, MI. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Linkages Review #985738 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . excessive play in pitman arms found during inspection of vehicle. please describe details. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W35X. Ford Crown Victoria 1995 problem was reported in CREVECOEUR, MO. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Hydraulic Power Assist SystemFord Crown Victoria 1995 Steering Hydraulic Power Assist System Review #985885 FORD CROWN VICTORIA 1995 car safety problem was reported on July 01, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:HYDRAULIC POWER ASSIST SYSTEM . #pe96-029; driving at high speed car over steers and causes the car to go into a skid. please describe details. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W1SX. Ford Crown Victoria 1995 problem was reported in PHILIPSBURG, MT. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering LinkagesFord Crown Victoria 1995 Steering Linkages Review #985898 FORD CROWN VICTORIA 1995 car safety problem was reported on June 19, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . vehicle police, expericing steering problems, possible pitman arm problem, also front suspension being repaired..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W5SX. Ford Crown Victoria 1995 problem was reported in ORONO, MN. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Hydraulic Power Assist SystemFord Crown Victoria 1995 Steering Hydraulic Power Assist System Review #985893 FORD CROWN VICTORIA 1995 car safety problem was reported on Apr 01, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:HYDRAULIC POWER ASSIST SYSTEM . police vehicle, loud noise when turning the steering to the left and right. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2SALP71W7SX. Ford Crown Victoria 1995 problem was reported in PHILADELPHIA, PA. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering LinkagesFord Crown Victoria 1995 Steering Linkages Review #985894 FORD CROWN VICTORIA 1995 car safety problem was reported on Mar 20, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . premature wear of pitman arm/ball joint due to lack of lubrication. *ak.0 person(s) were injured. 0 person(s) died.Ford Crown Victoria 1995 problem was reported in MIAMI, OK. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Linkages Review #985920 FORD CROWN VICTORIA 1995 car safety problem was reported on May 01, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . pe96-029, active , pitman arm failure, discovered when checking the parts (other vehicle on (507840). *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71WXSX. Ford Crown Victoria 1995 problem was reported in CHESHIRE, CT. Vehicle was purchased on Apr 01, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Steering Linkages Review #985927 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . townson state police dept; the ball joint connecting the pitman arm is wearing out. consumer feels it may separate from the socket. please describe..0 person(s) were injured. 0 person(s) died.Ford Crown Victoria 1995 problem was reported in TOWNSON, MD. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Linkages Review #985919 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . #pe96-029: (6) out 0f (8) cars experienced steering problems, due to pitman arm. please describe details..Ford Crown Victoria 1995 problem was reported in HILLSBORO, OR. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Linkages Review #985948 FORD CROWN VICTORIA 1995 car safety problem was reported on Mar 01, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . #pe96-029; when making left turn there is a pop like a joint is popped out. only heard when making hard left turns, please describe details. *ak.0 person(s) were injured. 0 person(s) died.Ford Crown Victoria 1995 problem was reported in ST. JAMES, MN. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Linkages Review #985913 FORD CROWN VICTORIA 1995 car safety problem was reported on Apr 23, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . #pe96-029: pitman arm fell apart on several cruisers. please describe details. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W2SX. Ford Crown Victoria 1995 problem was reported in HOPATCONG, NJ. Accident was reported to Police. Original Owner. Vehicle was purchased on May 31, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Ford Crown Victoria 1995 drive type:RWD. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: MAN . Ford Crown Victoria 1995 Steering Linkages Review #985908 FORD CROWN VICTORIA 1995 car safety problem was reported on May 30, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . this a police vehicle. the vehicle had a shot pitman arm and it caused the steering of the vehicle to be off. please describe. *ak.Ford Crown Victoria 1995 problem was reported in ADDYSTON, OH. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Linkages Review #985959 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . #pe96-29; has (5) police criusers. had to replace pitman arm & ball joints in (4). under 40,000 miles on vechicle. *ak.0 person(s) were injured. 0 person(s) died.Ford Crown Victoria 1995 problem was reported in WILMINGTON, MA. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Rack And PinionFord Crown Victoria 1995 Steering Rack And Pinion Review #986002 FORD CROWN VICTORIA 1995 car safety problem was reported on Apr 26, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:RACK AND PINION . pe96-029; 1 out 3 police vehicles have had pitman arm failures.*ak durnign normal maintanence it ws discovered the pitman arm was loose at the ball socket so the dealer was contacted and they saud they would replace it, also the steering gear assembly was overhauled and idler arm and bracket assembly replaced, because the front end had to much slack and wanders, spool valve did not have all the balls betwern worm and rack.*jb.Vehicle Identification Number (VIN):2FALP71W2SX. Ford Crown Victoria 1995 problem was reported in SIKESTON, MO. Original Owner. Vehicle was purchased on Jan 01, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Steering LinkagesFord Crown Victoria 1995 Steering Linkages Review #986002 FORD CROWN VICTORIA 1995 car safety problem was reported on Apr 26, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . pe96-029; 1 out 3 police vehicles have had pitman arm failures.*ak durnign normal maintanence it ws discovered the pitman arm was loose at the ball socket so the dealer was contacted and they saud they would replace it, also the steering gear assembly was overhauled and idler arm and bracket assembly replaced, because the front end had to much slack and wanders, spool valve did not have all the balls betwern worm and rack.*jb.Vehicle Identification Number (VIN):2FALP71W2SX. Ford Crown Victoria 1995 problem was reported in SIKESTON, MO. Original Owner. Vehicle was purchased on Jan 01, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Steering Linkages Arm Idler And AttachmentFord Crown Victoria 1995 Steering Linkages Arm Idler And Attachment Review #986002 FORD CROWN VICTORIA 1995 car safety problem was reported on Apr 26, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES:ARM:IDLER AND ATTACHMENT . pe96-029; 1 out 3 police vehicles have had pitman arm failures.*ak durnign normal maintanence it ws discovered the pitman arm was loose at the ball socket so the dealer was contacted and they saud they would replace it, also the steering gear assembly was overhauled and idler arm and bracket assembly replaced, because the front end had to much slack and wanders, spool valve did not have all the balls betwern worm and rack.*jb.Vehicle Identification Number (VIN):2FALP71W2SX. Ford Crown Victoria 1995 problem was reported in SIKESTON, MO. Original Owner. Vehicle was purchased on Jan 01, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Steering Gear Box Shaft PitmanFord Crown Victoria 1995 Steering Gear Box Shaft Pitman Review #601414 FORD CROWN VICTORIA 1995 car safety problem was reported on Mar 01, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:GEAR BOX:SHAFT PITMAN . pitman shaft separates from arm, causing loss of control of steering. (second vehicle on 503161, 601415) *dh.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71WXSX. Ford Crown Victoria 1995 problem was reported in PARAMUS, NJ. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Gear Box Shaft Pitman Review #601415 FORD CROWN VICTORIA 1995 car safety problem was reported on May 08, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:GEAR BOX:SHAFT PITMAN . pitman shaft separates from arm, causing loss of control of steering. (third vehicle on 503161, 601414) *dh.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W0SX. Ford Crown Victoria 1995 problem was reported in PARAMUS, NJ. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Gear Box Shaft Pitman Review #503159 FORD CROWN VICTORIA 1995 car safety problem was reported on Mar 27, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:GEAR BOX:SHAFT PITMAN . pitman shaft separates from arm, causing loss of control of steering. *dh.0 person(s) were injured. 0 person(s) died.Ford Crown Victoria 1995 problem was reported in WASHINGTON, DC. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Gear Box Shaft Pitman Review #503161 FORD CROWN VICTORIA 1995 car safety problem was reported on Apr 09, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:GEAR BOX:SHAFT PITMAN . pitman shaft separates from arm, causing loss of control of steering. (first vehicle on 601414, 601415) *dh.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W3SX. Ford Crown Victoria 1995 problem was reported in PARAMUS, NJ. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Power Train Automatic TransmissionFord Crown Victoria 1995 Power Train Automatic Transmission Review #986159 FORD CROWN VICTORIA 1995 car safety problem was reported on June 01, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . pitman arm separated, after inspection found the separation of the arm. *ak transmission was also replaced, with low mileage.*jb.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W2SX. Ford Crown Victoria 1995 problem was reported in STAPLES, MN. Original Owner. Vehicle was purchased on Mar 01, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Steering LinkagesFord Crown Victoria 1995 Steering Linkages Review #986159 FORD CROWN VICTORIA 1995 car safety problem was reported on June 01, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . pitman arm separated, after inspection found the separation of the arm. *ak transmission was also replaced, with low mileage.*jb.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W2SX. Ford Crown Victoria 1995 problem was reported in STAPLES, MN. Original Owner. Vehicle was purchased on Mar 01, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Suspension FrontFord Crown Victoria 1995 Suspension Front Review #986152 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SUSPENSION:FRONT . when turning the corner car feels like it is floating , please describe . *ak.0 person(s) were injured. 0 person(s) died.Ford Crown Victoria 1995 problem was reported in BOYERTOWN, PA. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering LinkagesFord Crown Victoria 1995 Steering Linkages Review #986219 FORD CROWN VICTORIA 1995 car safety problem was reported on May 01, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . pe96-029 active, steering gear ball joint on the pitman arm, stopped while driving, loss of steering. *ak.0 person(s) were injured. 0 person(s) died.Ford Crown Victoria 1995 problem was reported in NEEDHAM, MA. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Linkages Review #986241 FORD CROWN VICTORIA 1995 car safety problem was reported on June 26, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . (streering) loose pitman arm. please give more information *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W1SX. Ford Crown Victoria 1995 problem was reported in WHEATON, IL. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Linkages Review #986357 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . police cruiser package: pitman arm/ball joint seperation occurred 2 times. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W3SX. Ford Crown Victoria 1995 problem was reported in SHARON, PA. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Linkages Review #986386 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . (4)several crown victoria's had to be repaired because of the pitman arms. please describe ..0 person(s) were injured. 0 person(s) died.Ford Crown Victoria 1995 problem was reported in CONJUNCTION, 00. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Linkages Review #986478 FORD CROWN VICTORIA 1995 car safety problem was reported on July 02, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . pitman arm worn out, discovered during routine check, could have separated from socket causing loss of steering control..Vehicle Identification Number (VIN):2FALP71W2SX. Ford Crown Victoria 1995 problem was reported in BELLEVILLE, IL. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Hydraulic Power Assist SystemFord Crown Victoria 1995 Steering Hydraulic Power Assist System Review #986507 FORD CROWN VICTORIA 1995 car safety problem was reported on June 01, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:HYDRAULIC POWER ASSIST SYSTEM . on a low speed turn, vehicle becomes very hard to steer, loss of power steering. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W6SX. Ford Crown Victoria 1995 problem was reported in ANNISTON, AL. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering LinkagesFord Crown Victoria 1995 Steering Linkages Review #985918 FORD CROWN VICTORIA 1995 car safety problem was reported on May 21, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . pe96-029 active,pitman arm failure, when inspected, parts falling off, also misalignment, resultin gin replacement of front tires. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W4SX. Ford Crown Victoria 1995 problem was reported in AITKIN, MN. Accident was reported to Police. Original Owner. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Ford Crown Victoria 1995 drive type:RWD. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Suspension FrontFord Crown Victoria 1995 Suspension Front Review #985918 FORD CROWN VICTORIA 1995 car safety problem was reported on May 21, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SUSPENSION:FRONT . pe96-029 active,pitman arm failure, when inspected, parts falling off, also misalignment, resultin gin replacement of front tires. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W4SX. Ford Crown Victoria 1995 problem was reported in AITKIN, MN. Accident was reported to Police. Original Owner. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Ford Crown Victoria 1995 drive type:RWD. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Steering LinkagesFord Crown Victoria 1995 Steering Linkages Review #985924 FORD CROWN VICTORIA 1995 car safety problem was reported on June 20, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . pe96-029, active, on 3 vehicles experienced pitman arm failures, when ckecking the parts very loose and replaced the part. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W3SX. Ford Crown Victoria 1995 problem was reported in WOODRIDGE, NJ. Original Owner. Vehicle was purchased on Apr 01, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Steering Linkages Review #986683 FORD CROWN VICTORIA 1995 car safety problem was reported on July 05, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . police cars, found 3 pitman arms defective, replaced all three. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W8SX. Ford Crown Victoria 1995 problem was reported in MASSILLON, OH. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Linkages Review #505638 FORD CROWN VICTORIA 1995 car safety problem was reported on June 17, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . steering pitman arm failure. *sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71WXSX. Ford Crown Victoria 1995 problem was reported in SPRINGFIEL, OR. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Linkages Review #505633 FORD CROWN VICTORIA 1995 car safety problem was reported on June 06, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . excessive wear in pitman arm ball joint. (1st vehicle on 505634)*sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W55X. Ford Crown Victoria 1995 problem was reported in SPRINGFIEL, OR. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Linkages Review #505634 FORD CROWN VICTORIA 1995 car safety problem was reported on June 17, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . excessive wear in pitman arm ball joint. (2nd vehicle on 505633) *sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W1SX. Ford Crown Victoria 1995 problem was reported in SPRINGFIEL, OR. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Linkages Review #505635 FORD CROWN VICTORIA 1995 car safety problem was reported on June 17, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . excessive wear in pitman arm ball joint. (3rd vehicle on 505636)*sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W8SX. Ford Crown Victoria 1995 problem was reported in SPRINGFIEL, OR. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Linkages Review #505636 FORD CROWN VICTORIA 1995 car safety problem was reported on June 17, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . excessive wear in pitman arm ball joint. (4th vehicle on 505635)*sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W35X. Ford Crown Victoria 1995 problem was reported in SPRINGFIEL, OR. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Linkages Review #985897 FORD CROWN VICTORIA 1995 car safety problem was reported on July 02, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . four police vehicles are experiencing failures w/pitman arm/ball joint separating. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W1SK. Ford Crown Victoria 1995 problem was reported in CHILLI COTHE, OH. Original Owner. Vehicle was purchased on May 01, 1905. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Suspension Front Control ArmFord Crown Victoria 1995 Suspension Front Control Arm Review #985897 FORD CROWN VICTORIA 1995 car safety problem was reported on July 02, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SUSPENSION:FRONT:CONTROL ARM . four police vehicles are experiencing failures w/pitman arm/ball joint separating. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W1SK. Ford Crown Victoria 1995 problem was reported in CHILLI COTHE, OH. Original Owner. Vehicle was purchased on May 01, 1905. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Steering LinkagesFord Crown Victoria 1995 Steering Linkages Review #986120 FORD CROWN VICTORIA 1995 car safety problem was reported on May 31, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . #pe96-029; had to replace pitman arm ball joints on both vehicles. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W35X. Ford Crown Victoria 1995 problem was reported in NEWTOWN SQUA, PA. Vehicle was purchased on May 01, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Steering Linkages Review #985955 FORD CROWN VICTORIA 1995 car safety problem was reported on June 12, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . police vehicle. the pitman arm fell apart and loss of steering.please describe..Vehicle Identification Number (VIN):2FALP71W3SX. Ford Crown Victoria 1995 problem was reported in WEBSTER, MA. Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Steering Linkages Review #985953 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . #pe96-029; (4) vehicles had problem with pitman arm. please describe details. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W351. Ford Crown Victoria 1995 problem was reported in CANTON, IL. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Steering Linkages Review #985914 FORD CROWN VICTORIA 1995 car safety problem was reported on June 04, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . this is a police vehicle. the car has had steering problems due to the pitman arem falling out of the car. please describe. *ak.Vehicle Identification Number (VIN):SFLALP71W6S. Ford Crown Victoria 1995 problem was reported in BELLEVILLE, IL. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Steering Linkages Review #506278 FORD CROWN VICTORIA 1995 car safety problem was reported on May 14, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . pitman arm worn/unable to steer vehicle properly. (2nd vehicle on 601554)*sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W65X. Ford Crown Victoria 1995 problem was reported in CANTON, MA. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Gear Box Shaft PitmanFord Crown Victoria 1995 Steering Gear Box Shaft Pitman Review #506178 FORD CROWN VICTORIA 1995 car safety problem was reported on Apr 01, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:GEAR BOX:SHAFT PITMAN . pitman arm worn almost to the point of failure. *dh.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W3SX. Ford Crown Victoria 1995 problem was reported in ANGOLA, NY. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Gear Box Shaft Pitman Review #506085 FORD CROWN VICTORIA 1995 car safety problem was reported on June 01, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:GEAR BOX:SHAFT PITMAN . pitman arm assembly separated, causing loss of steering. *dh.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W6SX. Ford Crown Victoria 1995 problem was reported in SHELBY, OH. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering LinkagesFord Crown Victoria 1995 Steering Linkages Review #601555 FORD CROWN VICTORIA 1995 car safety problem was reported on Apr 12, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . pitman arm worn/unable to steer vehicle properly. (1st vehicle on 506278,2nd vehicle on 601554)*sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71WXS1. Ford Crown Victoria 1995 problem was reported in CANTON, MA. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Linkages Review #601554 FORD CROWN VICTORIA 1995 car safety problem was reported on May 16, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . pitman arm worn/unable to steer vehicle properly. (1st vehicle on 506278)*sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71WXSX. Ford Crown Victoria 1995 problem was reported in CANTON, MA. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Linkages Review #506269 FORD CROWN VICTORIA 1995 car safety problem was reported on July 05, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . pitman arm failed. *sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W9SX. Ford Crown Victoria 1995 problem was reported in INDEPENDEN, KS. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Wheel And Handle BarFord Crown Victoria 1995 Steering Wheel And Handle Bar Review #986200 FORD CROWN VICTORIA 1995 car safety problem was reported on Mar 12, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:WHEEL AND HANDLE BAR . the steering wheel pulls away when going around curves. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W7SX. Ford Crown Victoria 1995 problem was reported in BEAN STATION, TN. Original Owner. Vehicle was purchased on Oct 01, 1994. Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Steering LinkagesFord Crown Victoria 1995 Steering Linkages Review #801231 FORD CROWN VICTORIA 1995 car safety problem was reported on May 01, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . pe96-029, active, pitman arm failure, discovered when checking the parts (other vehicle from 985920). *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W6SX. Ford Crown Victoria 1995 problem was reported in CHESHIRE, CT. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Steering Linkages Review #985942 FORD CROWN VICTORIA 1995 car safety problem was reported on June 12, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . when turned corner, noticed clunking noise, found pitman arm had nearly separated. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W4SX. Ford Crown Victoria 1995 problem was reported in NEBRASKA CIT, NE. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Steering Hydraulic Power Assist SystemFord Crown Victoria 1995 Steering Hydraulic Power Assist System Review #987258 FORD CROWN VICTORIA 1995 car safety problem was reported on Aug 01, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:HYDRAULIC POWER ASSIST SYSTEM . vehicle is very hard to steer when you are mashing on the gas pedal. you have to let up off the pedal in order to steer the vehicle. please describe details.*ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W7SX. Ford Crown Victoria 1995 problem was reported in DANDRIDGE, TN. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Hydraulic Power Assist System Review #987258 FORD CROWN VICTORIA 1995 car safety problem was reported on Aug 01, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:HYDRAULIC POWER ASSIST SYSTEM . vehicle is very hard to steer when you are mashing on the gas pedal. you have to let up off the pedal in order to steer the vehicle. please describe details.*ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W7SX. Ford Crown Victoria 1995 problem was reported in DANDRIDGE, TN. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Suspension Front Control ArmFord Crown Victoria 1995 Suspension Front Control Arm Review #986011 FORD CROWN VICTORIA 1995 car safety problem was reported on June 24, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SUSPENSION:FRONT:CONTROL ARM . police car, pitman arm/ball joint let go, resulting in steering problems, in for repair. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71WXSX. Ford Crown Victoria 1995 problem was reported in HOUSTON, TX. Original Owner. Vehicle was purchased on July 13, 1995. Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Steering LinkagesFord Crown Victoria 1995 Steering Linkages Review #986011 FORD CROWN VICTORIA 1995 car safety problem was reported on June 24, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . police car, pitman arm/ball joint let go, resulting in steering problems, in for repair. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71WXSX. Ford Crown Victoria 1995 problem was reported in HOUSTON, TX. Original Owner. Vehicle was purchased on July 13, 1995. Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Steering Linkages Review #986399 FORD CROWN VICTORIA 1995 car safety problem was reported on June 27, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . #pe96-029;had to replace pitman arm/ball joint (police department, town of mccandless). *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W9SX. Ford Crown Victoria 1995 problem was reported in WEXFORD, PA. Original Owner. Vehicle was purchased on Apr 25, 1995. Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Steering Hydraulic Power Assist PumpFord Crown Victoria 1995 Steering Hydraulic Power Assist Pump Review #986399 FORD CROWN VICTORIA 1995 car safety problem was reported on June 27, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:HYDRAULIC POWER ASSIST:PUMP . #pe96-029;had to replace pitman arm/ball joint (police department, town of mccandless). *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W9SX. Ford Crown Victoria 1995 problem was reported in WEXFORD, PA. Original Owner. Vehicle was purchased on Apr 25, 1995. Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Steering LinkagesFord Crown Victoria 1995 Steering Linkages Review #985740 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . replaced loose pitman arm. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W85X. Ford Crown Victoria 1995 problem was reported in CREVECOEUR, MO. Original Owner. Vehicle was purchased on May 02, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Service Brakes, Hydraulic Foundation Components Disc CaliperFord Crown Victoria 1995 Service Brakes, Hydraulic Foundation Components Disc Caliper Review #800363 FORD CROWN VICTORIA 1995 car safety problem was reported on July 31, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER . (police car), failure on the front brake caliper bracket bolts. *ak.Ford Crown Victoria 1995 problem was reported in LAUREL, MS. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Ford Crown Victoria 1995 SteeringFord Crown Victoria 1995 Steering Review #800622 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING . police dept experienced trouble with steering of the vehicle while driving, steering makes popping noises, sometimes hard to steer while turning corners.*ak.Ford Crown Victoria 1995 problem was reported in FARMINGTON, MO. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Hydraulic Power Assist SystemFord Crown Victoria 1995 Steering Hydraulic Power Assist System Review #800622 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:HYDRAULIC POWER ASSIST SYSTEM . police dept experienced trouble with steering of the vehicle while driving, steering makes popping noises, sometimes hard to steer while turning corners.*ak.Ford Crown Victoria 1995 problem was reported in FARMINGTON, MO. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Review #801572 FORD CROWN VICTORIA 1995 car safety problem was reported on Jan 01, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING . went driving above (45) steering goes limp, this condition lasted for about (1) second, then steering comes back. this happens about once a week.*ak.Vehicle Identification Number (VIN):2FALP74W3SX. Ford Crown Victoria 1995 problem was reported in PENSACOLA, FL. Original Owner. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering LinkagesFord Crown Victoria 1995 Steering Linkages Review #507184 FORD CROWN VICTORIA 1995 car safety problem was reported on July 19, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . pitman arm worn, causing steering failure. *sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W4SX. Ford Crown Victoria 1995 problem was reported in BLUE BELL, PA. Original Owner. Vehicle was purchased on May 01, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Steering Wheel And Handle BarFord Crown Victoria 1995 Steering Wheel And Handle Bar Review #802706 FORD CROWN VICTORIA 1995 car safety problem was reported on July 12, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:WHEEL AND HANDLE BAR . campbell county police department is experiencing a problem with the steering wheel and column when making a turn, the driver lost control of the vehicle.*ak.Ford Crown Victoria 1995 problem was reported in JACKSBORO, TN. Original Owner. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Linkages Knuckle Spindle ArmFord Crown Victoria 1995 Steering Linkages Knuckle Spindle Arm Review #601597 FORD CROWN VICTORIA 1995 car safety problem was reported on Aug 12, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES:KNUCKLE:SPINDLE:ARM . two bolts holding brake assembly to spindle broke off. ( second vehicle on 508207).0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W7SX. Ford Crown Victoria 1995 problem was reported in WASHINGTON, DC. Original Owner. Vehicle was purchased on Jan 31, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Steering Linkages Knuckle Spindle Arm Review #508207 FORD CROWN VICTORIA 1995 car safety problem was reported on June 05, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES:KNUCKLE:SPINDLE:ARM . two bolts holding brake assembly to spindle broke off. ( first vehicle on 601597).0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W4SX. Ford Crown Victoria 1995 problem was reported in WASHINGTON, DC. Original Owner. Vehicle was purchased on Jan 31, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Steering Gear Box Shaft PitmanFord Crown Victoria 1995 Steering Gear Box Shaft Pitman Review #531979 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:GEAR BOX:SHAFT PITMAN . bearing in the pitman arm of the steering system may become excessively worn allowing the pitman arm to separate from the center link of the steering system without warning. driver would likely experience loss of steering control of vehicle - as per recall. two hours after scheduled appointment time for recall service, owner was informed that repairs could not be performed because they had no information on the recall..Vehicle Identification Number (VIN):2FALP72W6SX. Ford Crown Victoria 1995 problem was reported in ENGLESIDE, VA. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering Linkages Tie Rod AssemblyFord Crown Victoria 1995 Steering Linkages Tie Rod Assembly Review #508584 FORD CROWN VICTORIA 1995 car safety problem was reported on Aug 29, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES:TIE ROD ASSEMBLY . right inner/outer tie rods loose, causing steering problems..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W0SX. Ford Crown Victoria 1995 problem was reported in PARSONS, KS. Original Owner. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Steering Linkages Tie Rod Assembly Review #508584 FORD CROWN VICTORIA 1995 car safety problem was reported on Aug 29, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES:TIE ROD ASSEMBLY . right inner/outer tie rods loose, causing steering problems..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W0SX. Ford Crown Victoria 1995 problem was reported in PARSONS, KS. Original Owner. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Service Brakes, Hydraulic AntilockFord Crown Victoria 1995 Service Brakes, Hydraulic Antilock Review #803002 FORD CROWN VICTORIA 1995 car safety problem was reported on Jan 01, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SERVICE BRAKES, HYDRAULIC:ANTILOCK . the abs is engaging unexpectedly and the brakes don't work. this happens on normal road conditions. one minor accident already happened. *ak.Vehicle was involved in a crash. Vehicle Identification Number (VIN):2FALP71W8FX. Ford Crown Victoria 1995 problem was reported in GRANTS PASS, OR. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Suspension Front Control Arm Lower ArmFord Crown Victoria 1995 Suspension Front Control Arm Lower Arm Review #803603 FORD CROWN VICTORIA 1995 car safety problem was reported on Oct 09, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SUSPENSION:FRONT:CONTROL ARM:LOWER ARM . while driving the right lower control arm fell off the vehicle. *ak.Vehicle Identification Number (VIN):2FALP71W5SX. Ford Crown Victoria 1995 problem was reported in BELZONI, MS. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Communications Horn AssemblyFord Crown Victoria 1995 Communications Horn Assembly Review #506640 FORD CROWN VICTORIA 1995 car safety problem was reported on July 19, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with COMMUNICATIONS:HORN ASSEMBLY . horn buttons difficult to access while driving without taking eyes off road..0 person(s) were injured. 0 person(s) died.Ford Crown Victoria 1995 problem was reported in PALM COAST, FL. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Service Brakes, Hydraulic AntilockFord Crown Victoria 1995 Service Brakes, Hydraulic Antilock Review #804716 FORD CROWN VICTORIA 1995 car safety problem was reported on Oct 01, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SERVICE BRAKES, HYDRAULIC:ANTILOCK . abs brake failure, overheating, replacement of rotors and pads, and causing a vibration in the front end and makes a grinding noise, a loss of effectiveness. *ak.Vehicle Identification Number (VIN):2FALP74W2SX. Ford Crown Victoria 1995 problem was reported in LILBURN, GA. Original Owner. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Service Brakes, Hydraulic Foundation Components Disc RotorFord Crown Victoria 1995 Service Brakes, Hydraulic Foundation Components Disc Rotor Review #804716 FORD CROWN VICTORIA 1995 car safety problem was reported on Oct 01, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:ROTOR . abs brake failure, overheating, replacement of rotors and pads, and causing a vibration in the front end and makes a grinding noise, a loss of effectiveness. *ak.Vehicle Identification Number (VIN):2FALP74W2SX. Ford Crown Victoria 1995 problem was reported in LILBURN, GA. Original Owner. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Service Brakes, Hydraulic Foundation Components Disc PadsFord Crown Victoria 1995 Service Brakes, Hydraulic Foundation Components Disc Pads Review #804716 FORD CROWN VICTORIA 1995 car safety problem was reported on Oct 01, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:PADS . abs brake failure, overheating, replacement of rotors and pads, and causing a vibration in the front end and makes a grinding noise, a loss of effectiveness. *ak.Vehicle Identification Number (VIN):2FALP74W2SX. Ford Crown Victoria 1995 problem was reported in LILBURN, GA. Original Owner. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Engine And Engine Cooling Engine GasolineFord Crown Victoria 1995 Engine And Engine Cooling Engine Gasoline Review #509659 FORD CROWN VICTORIA 1995 car safety problem was reported on June 06, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with ENGINE AND ENGINE COOLING:ENGINE:GASOLINE . intermittent stalling..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP74W8SX. Ford Crown Victoria 1995 problem was reported in GARDNERVILLE, NV. Original Owner. Vehicle was purchased on Sept 11, 1995. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 5 mph. Ford Crown Victoria 1995 Air Bags FrontalFord Crown Victoria 1995 Air Bags Frontal Review #804448 FORD CROWN VICTORIA 1995 car safety problem was reported on Aug 17, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with AIR BAGS:FRONTAL . a sudden stop caused the a head-on collision and the air bags deployed and consumer's wife lost her hearing. *ak.Vehicle was involved in a crash. 1 person(s) were injured. Vehicle Identification Number (VIN):2FALP74W3SX. Ford Crown Victoria 1995 problem was reported in ALLEN PARK, MI. Accident was reported to Police. Original Owner. Vehicle was purchased on Sept 27, 1994. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Ford Crown Victoria 1995 drive type:RWD. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 35 mph. Ford Crown Victoria 1995 Air Bags Frontal Review #804448 FORD CROWN VICTORIA 1995 car safety problem was reported on Aug 17, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with AIR BAGS:FRONTAL . a sudden stop caused the a head-on collision and the air bags deployed and consumer's wife lost her hearing. *ak.Vehicle was involved in a crash. 1 person(s) were injured. Vehicle Identification Number (VIN):2FALP74W3SX. Ford Crown Victoria 1995 problem was reported in ALLEN PARK, MI. Accident was reported to Police. Original Owner. Vehicle was purchased on Sept 27, 1994. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Ford Crown Victoria 1995 drive type:RWD. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 35 mph. Ford Crown Victoria 1995 Steering LinkagesFord Crown Victoria 1995 Steering Linkages Review #506972 FORD CROWN VICTORIA 1995 car safety problem was reported on Apr 01, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . pitman arm separating from the shaft, presenting possibility of steering loss..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W1SX. Ford Crown Victoria 1995 problem was reported in BUFFALO, MO. Original Owner. Vehicle was purchased on June 01, 1995. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Steering Linkages Review #507462 FORD CROWN VICTORIA 1995 car safety problem was reported on June 07, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . pitman arm separating at joint..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W0SX. Ford Crown Victoria 1995 problem was reported in PENN YAN, NY. Accident was reported to Police. Original Owner. Vehicle was purchased on July 25, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Suspension Front Control Arm Lower ArmFord Crown Victoria 1995 Suspension Front Control Arm Lower Arm Review #511309 FORD CROWN VICTORIA 1995 car safety problem was reported on Sept 20, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SUSPENSION:FRONT:CONTROL ARM:LOWER ARM . lower left control arm replaced. (1st vehicle on 511310).0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W2SX. Ford Crown Victoria 1995 problem was reported in HOPATCONG, NJ. Original Owner. Vehicle was purchased on May 31, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Suspension Front Control Arm Lower Arm Review #511310 FORD CROWN VICTORIA 1995 car safety problem was reported on Oct 29, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SUSPENSION:FRONT:CONTROL ARM:LOWER ARM . lower left control arm replaced. (2nd vehicle on 511309).0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71WXSX. Ford Crown Victoria 1995 problem was reported in HOPATCONG, NJ. Original Owner. Vehicle was purchased on May 31, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Service Brakes, Hydraulic Foundation ComponentsFord Crown Victoria 1995 Service Brakes, Hydraulic Foundation Components Review #807006 FORD CROWN VICTORIA 1995 car safety problem was reported on Dec 27, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS . while coming to a stop the emergency brake and the hydraulic brake went out and the owner could not stop the car. *ak.Vehicle Identification Number (VIN):2FALP74W2SX. Ford Crown Victoria 1995 problem was reported in LAS CRUCES, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Parking BrakeFord Crown Victoria 1995 Parking Brake Review #807006 FORD CROWN VICTORIA 1995 car safety problem was reported on Dec 27, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with PARKING BRAKE . while coming to a stop the emergency brake and the hydraulic brake went out and the owner could not stop the car. *ak.Vehicle Identification Number (VIN):2FALP74W2SX. Ford Crown Victoria 1995 problem was reported in LAS CRUCES, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Suspension FrontFord Crown Victoria 1995 Suspension Front Review #807740 FORD CROWN VICTORIA 1995 car safety problem was reported on Dec 01, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SUSPENSION:FRONT . police vehicle, front suspension, when driving at any speed makes a loud noise, when making a left or right turn or on uneven highway. *ak.Vehicle Identification Number (VIN):2FALP71W8SX. Ford Crown Victoria 1995 problem was reported in PARADISE, CA. Original Owner. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Engine And Engine Cooling Engine GasolineFord Crown Victoria 1995 Engine And Engine Cooling Engine Gasoline Review #513923 FORD CROWN VICTORIA 1995 car safety problem was reported on Dec 20, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with ENGINE AND ENGINE COOLING:ENGINE:GASOLINE . engine failed/stalled..0 person(s) died.Vehicle Identification Number (VIN):2FALP74W3SX. Ford Crown Victoria 1995 problem was reported in CHICAGO, IL. Original Owner. Vehicle was purchased on Aug 30, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:FWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 10 mph. Ford Crown Victoria 1995 Power Train Automatic Transmission Torque ConverterFord Crown Victoria 1995 Power Train Automatic Transmission Torque Converter Review #809588 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION:TORQUE CONVERTER . owner states while driving vehicle it stalls, causing vibration, there may be a faulty torque converter, dealers cannot find problem. *ak.Ford Crown Victoria 1995 problem was reported in FREDRICK, MD. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 TiresFord Crown Victoria 1995 Tires Review #513564 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with TIRES . tire size 225/60 r16 , and had a roofing tack in the tread..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP74W7SX. Ford Crown Victoria 1995 problem was reported in TYRONZA, AR. Original Owner. Vehicle was purchased on Aug 01, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Engine And Engine Cooling Engine GasolineFord Crown Victoria 1995 Engine And Engine Cooling Engine Gasoline Review #513564 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with ENGINE AND ENGINE COOLING:ENGINE:GASOLINE . engine failed to start after several repair attempts..0 person(s) died.Vehicle Identification Number (VIN):2FALP74W7SX. Ford Crown Victoria 1995 problem was reported in TYRONZA, AR. Original Owner. Vehicle was purchased on Aug 01, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Power Train Automatic Transmission Gear Position Indication (prndl)FORD CROWN VICTORIA 1995 car safety problem was reported on Apr 04, 1997.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION:GEAR POSITION INDICATION (PRNDL) . transmission shifting problem..0 person(s) died.Vehicle Identification Number (VIN):2FALP71WXSX. Ford Crown Victoria 1995 problem was reported in LOS ANGELES, CA. Original Owner. Vehicle was purchased on Dec 01, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Engine And Engine Cooling EngineFord Crown Victoria 1995 Engine And Engine Cooling Engine Review #812674 FORD CROWN VICTORIA 1995 car safety problem was reported on May 16, 1997.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with ENGINE AND ENGINE COOLING:ENGINE . driving vehicle about 20 mph vehicle started sputtering before stalling out; had it towed to mechanic & informed a spring had broken & the rod went through engine, causing the malfunction. (police interceptor). *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W5SX. Ford Crown Victoria 1995 problem was reported in CHICAGO, IL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 20 mph. Ford Crown Victoria 1995 Engine And Engine Cooling Exhaust System Emission Control Catalytic ConvertorFORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CATALYTIC CONVERTOR . catalytic converter odor..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP73W7SX. Ford Crown Victoria 1995 problem was reported in MANSFIELD, LA. Original Owner. Vehicle was purchased on Aug 01, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Exterior LightingFord Crown Victoria 1995 Exterior Lighting Review #517100 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with EXTERIOR LIGHTING . lights dim when vehicle is driven slower than 40 mph..0 person(s) died.Vehicle Identification Number (VIN):2FALP73W7SX. Ford Crown Victoria 1995 problem was reported in MANSFIELD, LA. Original Owner. Vehicle was purchased on Aug 01, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Unknown Or OtherFord Crown Victoria 1995 Unknown Or Other Review #516586 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with UNKNOWN OR OTHER . consumer complains that the overdrive light is not bright enough to be seen in daylight..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP74W5SX. Ford Crown Victoria 1995 problem was reported in KINGSTON, NY. Original Owner. Vehicle was purchased on Feb 02, 1995. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Air Bags FrontalFord Crown Victoria 1995 Air Bags Frontal Review #517025 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with AIR BAGS:FRONTAL . passenger air bag emitted burst of intesnse heat into glove box during deployment, melting plastic contents - concern arises because vehicle was a police cruiser with ammunition (none discharged during accident) stored in the glove box..0 person(s) died.Ford Crown Victoria 1995 problem was reported in PENN YAN, NY. Original Owner. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Engine And Engine Cooling Engine GasolineFord Crown Victoria 1995 Engine And Engine Cooling Engine Gasoline Review #817605 FORD CROWN VICTORIA 1995 car safety problem was reported on July 12, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with ENGINE AND ENGINE COOLING:ENGINE:GASOLINE . while driving the vehicle would stall and lose all power. when the vehicle loses all power the steering goes out. *ak.Vehicle Identification Number (VIN):2FABP44F5FX. Ford Crown Victoria 1995 problem was reported in BOXFORD, MA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 drive type:FWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Service Brakes, Hydraulic AntilockFord Crown Victoria 1995 Service Brakes, Hydraulic Antilock Review #817661 FORD CROWN VICTORIA 1995 car safety problem was reported on Jan 12, 1997.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SERVICE BRAKES, HYDRAULIC:ANTILOCK . (four wheel disc brakes). during inclement weather total loss of abs capabilities. resulting in vehicle crash. *akthe vehicle does not stop properly when the weather is damp or wet, and the responce time from initial brake depression to actual braking is too long. *nlm.Vehicle was involved in a crash. 1 person(s) were injured. Vehicle Identification Number (VIN):2FALP74WSX1. Ford Crown Victoria 1995 problem was reported in LAKE ORION, MI. Accident was reported to Police. Original Owner. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Ford Crown Victoria 1995 drive type:RWD. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 30 mph. Ford Crown Victoria 1995 Power Train Automatic TransmissionFord Crown Victoria 1995 Power Train Automatic Transmission Review #527560 FORD CROWN VICTORIA 1995 car safety problem was reported on Dec 21, 1997.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . vehicle engine had to be raced to get it into first gear..Vehicle Identification Number (VIN):2FALP74W5SX. Ford Crown Victoria 1995 problem was reported in JACKSON, TN. Original Owner. Vehicle was purchased on Jan 27, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 Service Brakes, Air Disc RotorFord Crown Victoria 1995 Service Brakes, Air Disc Rotor Review #527987 FORD CROWN VICTORIA 1995 car safety problem was reported on July 01, 1996.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SERVICE BRAKES, AIR:DISC:ROTOR . rotors warped causing vehicle to vibrate when braking..Vehicle Identification Number (VIN):2FALP74W3SX. Ford Crown Victoria 1995 problem was reported in ROANOKE, TX. Vehicle was purchased on Dec 12, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. Ford Crown Victoria 1995 Air Bags FrontalFord Crown Victoria 1995 Air Bags Frontal Review #533290 FORD CROWN VICTORIA 1995 car safety problem was reported on Mar 02, 1998.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with AIR BAGS:FRONTAL . while driving 35 mph on a straight road vehicle swerved to avoid hitting an object. the front tires collided with normal size cement curb, causing the air bag to deploy. driver lost control, resulting in a clash. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP74W8SX. Ford Crown Victoria 1995 problem was reported in TALLAHASSE, FL. Accident was reported to Police. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.FUEL SYSTEM:N/A. FUEL TYPE: GAS. VEHICLE SPEED: 35 mph. Ford Crown Victoria 1995 Suspension FrontFord Crown Victoria 1995 Suspension Front Review #531762 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SUSPENSION:FRONT . welds on the front of vehicle are not sufficient..0 person(s) died.Vehicle Identification Number (VIN):2FALP72W6SX. Ford Crown Victoria 1995 problem was reported in GOLDEN VAL, MN. Vehicle was purchased on Aug 07, 1997. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Parking Brake ConventionalFord Crown Victoria 1995 Parking Brake Conventional Review #534566 FORD CROWN VICTORIA 1995 car safety problem was reported on Oct 01, 1997.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with PARKING BRAKE:CONVENTIONAL . front disc brake calipers failed. also replaced emergency brake..Vehicle Identification Number (VIN):2FALP74W5SX. Ford Crown Victoria 1995 problem was reported in ALBION, PA. Vehicle was purchased on Jan 16, 1996. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 Service Brakes, Hydraulic Foundation Components Disc CaliperFord Crown Victoria 1995 Service Brakes, Hydraulic Foundation Components Disc Caliper Review #534566 FORD CROWN VICTORIA 1995 car safety problem was reported on Oct 01, 1997.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER . front disc brake calipers failed. also replaced emergency brake..Vehicle Identification Number (VIN):2FALP74W5SX. Ford Crown Victoria 1995 problem was reported in ALBION, PA. Vehicle was purchased on Jan 16, 1996. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 Communications Horn AssemblyFord Crown Victoria 1995 Communications Horn Assembly Review #534437 FORD CROWN VICTORIA 1995 car safety problem was reported on Apr 01, 1998.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with COMMUNICATIONS:HORN ASSEMBLY . design/location of the horn button causes difficulty accessing horn in emergency situations..Ford Crown Victoria 1995 problem was reported in ERIE, PA. Original Owner. Vehicle was purchased on Apr 01, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Vehicle Speed Control LinkagesFord Crown Victoria 1995 Vehicle Speed Control Linkages Review #824078 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with VEHICLE SPEED CONTROL:LINKAGES . after turning into a parking lot with foot on brake the throttle stuck, causing vehicle to increase speed, causing an accident. please provide any details. *ak.Vehicle was involved in a crash. Vehicle Identification Number (VIN):2FALP74W1SX. Ford Crown Victoria 1995 problem was reported in MANAHAWKIN, NJ. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Service Brakes, Hydraulic Foundation Components Disc RotorFord Crown Victoria 1995 Service Brakes, Hydraulic Foundation Components Disc Rotor Review #536840 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:ROTOR . the brakes on this vehicle wear excessively..Vehicle Identification Number (VIN):2FALP74W9SX. Ford Crown Victoria 1995 problem was reported in INDEPENDEN, MO. Original Owner. Vehicle was purchased on June 01, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. Ford Crown Victoria 1995 Vehicle Speed ControlFord Crown Victoria 1995 Vehicle Speed Control Review #824074 FORD CROWN VICTORIA 1995 car safety problem was reported on May 19, 1997.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with VEHICLE SPEED CONTROL . consumer is in a stop position , vehicle is on ,vehicle will suddenly accelerate, causing the the rear wheel to spin, making smoke dealer cannot determine problem. *ak.Vehicle Identification Number (VIN):2FALP73WXSX. Ford Crown Victoria 1995 problem was reported in BALTIMORE, MD. Accident was reported to Police. Original Owner. Vehicle was purchased on Aug 01, 1995. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Service Brakes, Hydraulic AntilockFord Crown Victoria 1995 Service Brakes, Hydraulic Antilock Review #535951 FORD CROWN VICTORIA 1995 car safety problem was reported on May 28, 1997.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SERVICE BRAKES, HYDRAULIC:ANTILOCK . anti lock brakes grind in wet weather..Vehicle Identification Number (VIN):2FALP74W6SX. Ford Crown Victoria 1995 problem was reported in LYNN, MA. Vehicle was purchased on May 05, 1997. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Power Train Automatic Transmission Torque ConverterFord Crown Victoria 1995 Power Train Automatic Transmission Torque Converter Review #525063 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION:TORQUE CONVERTER . torque converter failed twice..Ford Crown Victoria 1995 problem was reported in CHARLOTTE, NC. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Service Brakes, Hydraulic Foundation Components Disc PadsFord Crown Victoria 1995 Service Brakes, Hydraulic Foundation Components Disc Pads Review #533294 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:PADS . linings fall off of shoes causing loss of emergency braking..Ford Crown Victoria 1995 problem was reported in UNKNOWN, UN. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Engine And Engine Cooling Exhaust SystemFord Crown Victoria 1995 Engine And Engine Cooling Exhaust System Review #827004 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with ENGINE AND ENGINE COOLING:EXHAUST SYSTEM . while driving at 60 mph vehicle stalls for no reason. dealers have replaced emission control device which did not correct problem. *ak.Vehicle Identification Number (VIN):FILL IN. Ford Crown Victoria 1995 problem was reported in HASTINGS, MN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Engine And Engine Cooling EngineFord Crown Victoria 1995 Engine And Engine Cooling Engine Review #827004 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with ENGINE AND ENGINE COOLING:ENGINE . while driving at 60 mph vehicle stalls for no reason. dealers have replaced emission control device which did not correct problem. *ak.Vehicle Identification Number (VIN):FILL IN. Ford Crown Victoria 1995 problem was reported in HASTINGS, MN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Visibility WindshieldFord Crown Victoria 1995 Visibility Windshield Review #827754 FORD CROWN VICTORIA 1995 car safety problem was reported on Aug 06, 1998.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with VISIBILITY:WINDSHIELD . consumer states side windows do not work. *ak consumer states all three windows are now inoperable, the two rear windows failed to roll back up.*jb.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP74W3SX. Ford Crown Victoria 1995 problem was reported in NORTH LAS VEGAS, NV. Vehicle was purchased on Feb 25, 1997. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 drive type:RWD. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 45 mph. Ford Crown Victoria 1995 Service Brakes, Hydraulic AntilockFord Crown Victoria 1995 Service Brakes, Hydraulic Antilock Review #827984 FORD CROWN VICTORIA 1995 car safety problem was reported on Sept 17, 1998.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SERVICE BRAKES, HYDRAULIC:ANTILOCK . abs light sensor keeps coming on. vehicle has been in/out of dealer's shop, and the condition would return within a day or as much as four days. dealer keeps charging consumer every time he brings the vehicle back. *ak.Vehicle Identification Number (VIN):PLEASE FILL. Ford Crown Victoria 1995 problem was reported in WINTER HEAVEN, CA. Original Owner. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Seat Belts Front RetractorFord Crown Victoria 1995 Seat Belts Front Retractor Review #604042 FORD CROWN VICTORIA 1995 car safety problem was reported on May 15, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SEAT BELTS:FRONT:RETRACTOR . seat belt does not retract. qcaw.Vehicle Identification Number (VIN):2FALP74W2SX. Ford Crown Victoria 1995 problem was reported in SANTA ANA, CA. Vehicle was purchased on May 15, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Communications Horn AssemblyFord Crown Victoria 1995 Communications Horn Assembly Review #828035 FORD CROWN VICTORIA 1995 car safety problem was reported on Oct 07, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with COMMUNICATIONS:HORN ASSEMBLY . consumer can't locate the horn button to blow the horn. took vehicle to the dealer and they said it was a faulty design made by the manufacturer. *ak .Vehicle Identification Number (VIN):2FALP74W4SX. Ford Crown Victoria 1995 problem was reported in MECHANICSBURG, PA. Original Owner. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Steering LinkagesFord Crown Victoria 1995 Steering Linkages Review #828428 FORD CROWN VICTORIA 1995 car safety problem was reported on Apr 01, 1998.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . recall 96v135000 ; the pittman arm was not lubricated enough which caused the ball joints to become corroded. called manufacturer, but this vehicle is not included in the recall. *ak *ml.Vehicle was involved in a crash. 2 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FAOT74W1SX. Ford Crown Victoria 1995 problem was reported in ASHLAND, MA. Accident was reported to Police. Vehicle was purchased on Sept 01, 1995. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Steering Review #828616 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING . when coming off highway speeds into urban areas, particularly in parking lots, the steering fails, making it difficult to control. dealer can't duplicate the problem. *ak *slc.Vehicle Identification Number (VIN):2FALP73W2SX. Ford Crown Victoria 1995 problem was reported in MANSFIELD, AR. Vehicle was purchased on Mar 01, 1998. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Power Train Automatic TransmissionFord Crown Victoria 1995 Power Train Automatic Transmission Review #781071 FORD CROWN VICTORIA 1995 car safety problem was reported on Sept 01, 1998.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . transmission failure. aw.Ford Crown Victoria 1995 problem was reported in SOLON, OH. Vehicle was purchased on Dec 23, 1997. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 Power Train Automatic Transmission Review #781078 FORD CROWN VICTORIA 1995 car safety problem was reported on Nov 01, 1997.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . tramsmission hesitates and engages suddenly..Vehicle Identification Number (VIN):2FALP74W6SX. Ford Crown Victoria 1995 problem was reported in JACKSONVIL, FL. Vehicle was purchased on Dec 16, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. Ford Crown Victoria 1995 Visibility Windshield Wiper/washer MotorFord Crown Victoria 1995 Visibility Windshield Wiper/washer Motor Review #781069 FORD CROWN VICTORIA 1995 car safety problem was reported on Oct 02, 1998.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with VISIBILITY:WINDSHIELD WIPER/WASHER:MOTOR . windshield wipers failed during rainstorm. aw.Vehicle Identification Number (VIN):2FALP73W3SX. Ford Crown Victoria 1995 problem was reported in KENNESAW, GA. Vehicle was purchased on June 17, 1998. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 Air Bags FrontalFord Crown Victoria 1995 Air Bags Frontal Review #540906 FORD CROWN VICTORIA 1995 car safety problem was reported on Aug 29, 1998.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with AIR BAGS:FRONTAL . airbag did not inflate fully causing consumers chest to hit the steering wheel. the violent deployment of the airbag caused injury to the victims arm and also caused the seatbelt to cut her stomach..0 person(s) died.Vehicle Identification Number (VIN):2FAIP73485X. Ford Crown Victoria 1995 problem was reported in LINCOLNTON, GA. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Fuel System, Other Storage Fuel Gauge SystemFord Crown Victoria 1995 Fuel System, Other Storage Fuel Gauge System Review #604071 FORD CROWN VICTORIA 1995 car safety problem was reported on July 28, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with FUEL SYSTEM, OTHER:STORAGE:FUEL GAUGE SYSTEM . fuel gauge and sender assembly failed..Vehicle Identification Number (VIN):2FALP74W4SX. Ford Crown Victoria 1995 problem was reported in TARZANA, CA. Original Owner. Vehicle was purchased on Apr 14, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Fuel System, Other Storage Fuel Gauge System Review #604071 FORD CROWN VICTORIA 1995 car safety problem was reported on July 28, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with FUEL SYSTEM, OTHER:STORAGE:FUEL GAUGE SYSTEM . fuel gauge and sender assembly failed..Vehicle Identification Number (VIN):2FALP74W4SX. Ford Crown Victoria 1995 problem was reported in TARZANA, CA. Original Owner. Vehicle was purchased on Apr 14, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Power Train Automatic TransmissionFord Crown Victoria 1995 Power Train Automatic Transmission Review #542106 FORD CROWN VICTORIA 1995 car safety problem was reported on Nov 14, 1997.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . transmission continues to hesitate, jerk and lurch forward after repair of the faulty torque converter, unable to rectify transmission failure..Vehicle Identification Number (VIN):2FALP74W6SX. Ford Crown Victoria 1995 problem was reported in JACKSONVIL, FL. Vehicle was purchased on Dec 16, 1995. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Power Train Automatic Transmission Torque ConverterFord Crown Victoria 1995 Power Train Automatic Transmission Torque Converter Review #542106 FORD CROWN VICTORIA 1995 car safety problem was reported on Nov 14, 1997.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION:TORQUE CONVERTER . transmission continues to hesitate, jerk and lurch forward after repair of the faulty torque converter, unable to rectify transmission failure..Vehicle Identification Number (VIN):2FALP74W6SX. Ford Crown Victoria 1995 problem was reported in JACKSONVIL, FL. Vehicle was purchased on Dec 16, 1995. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Structure Body HoodFord Crown Victoria 1995 Structure Body Hood Review #702581 FORD CROWN VICTORIA 1995 car safety problem was reported on Jan 19, 1999.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STRUCTURE:BODY:HOOD . safety recall 97s63, hood striker plate replacement. ford says not this vin, but it failed! *ak.Vehicle Identification Number (VIN):2FALP73W9SX. Ford Crown Victoria 1995 problem was reported in SAN LEANDRO, CA. Original Owner. Vehicle was purchased on May 01, 1997. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:FWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. VEHICLE SPEED: 60 mph. Ford Crown Victoria 1995 Power Train Automatic Transmission Torque ConverterFord Crown Victoria 1995 Power Train Automatic Transmission Torque Converter Review #702647 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION:TORQUE CONVERTER . i am trying to find out if this vehicle was used as a taxi/police vehicle and if any recall services were performed on it. hyannis ford inc. stated there were no recalls on this vehicle, but i saw many listed on this site, i have questions in regards to the suspension/airbags/torque converter,etc. could you please tell me how i can find out if this vehicle has recalls on it and if i can get the work done. i had immediate problems with the vehicle when i bought it, and i don't think the dealer will give me straight answers. thanks for any help or information you can give me. *ak.Vehicle Identification Number (VIN):2FALP74W5SX. Ford Crown Victoria 1995 problem was reported in HYANNIS, MA. Vehicle was purchased on Mar 01, 1998. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:FWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 SuspensionFord Crown Victoria 1995 Suspension Review #702647 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SUSPENSION . i am trying to find out if this vehicle was used as a taxi/police vehicle and if any recall services were performed on it. hyannis ford inc. stated there were no recalls on this vehicle, but i saw many listed on this site, i have questions in regards to the suspension/airbags/torque converter,etc. could you please tell me how i can find out if this vehicle has recalls on it and if i can get the work done. i had immediate problems with the vehicle when i bought it, and i don't think the dealer will give me straight answers. thanks for any help or information you can give me. *ak.Vehicle Identification Number (VIN):2FALP74W5SX. Ford Crown Victoria 1995 problem was reported in HYANNIS, MA. Vehicle was purchased on Mar 01, 1998. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:FWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Air BagsFord Crown Victoria 1995 Air Bags Review #702647 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with AIR BAGS . i am trying to find out if this vehicle was used as a taxi/police vehicle and if any recall services were performed on it. hyannis ford inc. stated there were no recalls on this vehicle, but i saw many listed on this site, i have questions in regards to the suspension/airbags/torque converter,etc. could you please tell me how i can find out if this vehicle has recalls on it and if i can get the work done. i had immediate problems with the vehicle when i bought it, and i don't think the dealer will give me straight answers. thanks for any help or information you can give me. *ak.Vehicle Identification Number (VIN):2FALP74W5SX. Ford Crown Victoria 1995 problem was reported in HYANNIS, MA. Vehicle was purchased on Mar 01, 1998. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:FWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Latches/locks/linkages Hood LatchFord Crown Victoria 1995 Latches/locks/linkages Hood Latch Review #702644 FORD CROWN VICTORIA 1995 car safety problem was reported on Jan 19, 1999.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with LATCHES/LOCKS/LINKAGES:HOOD:LATCH . the hood came up and blinded me on the freeway at 60mph. i beleive i am lucky to be alive and not injured. nhtsa campaign id number: 97v024000, describes what happened to my car. i believe the same hood latch striker defect exists on 1995 crown victoria's without the police option,but it just takes longer to show up. this defect showed up on my car with 96625 miles of mostly freeway driving. i suspect in time many other standard 1995 crown victoria's will be having this problem. the four aluminium rivets that hold the hood striker plate to the hood fatigued with the stress of freeway driving, and came out when i was traveling 60mph on the freeway, releasing the hood which came up and smashed my windshield and blinded me. i am luck to be alive and not in injured. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP73W9SX. Ford Crown Victoria 1995 problem was reported in SAN LEANDRO, CA. Vehicle was purchased on May 01, 1997. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:FWD. FUEL TYPE: GAS. VEHICLE SPEED: 60 mph. Ford Crown Victoria 1995 Latches/locks/linkages Hood Latch Review #543885 FORD CROWN VICTORIA 1995 car safety problem was reported on Jan 19, 1999.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with LATCHES/LOCKS/LINKAGES:HOOD:LATCH . four aluminum rivets that hold my hood to the latch striker plate broke causing the hood to fly up and break windshield and blinding driver, recall component on heavier suspension models, vehicle denied due to suspension design..Ford Crown Victoria 1995 problem was reported in SAN LEANDR, CA. Vehicle was not using Cruise Control. VEHICLE SPEED: 65 mph. Ford Crown Victoria 1995 Exterior LightingFord Crown Victoria 1995 Exterior Lighting Review #544046 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with EXTERIOR LIGHTING . headlamp lenses have become white and smokey looking causing lighting to be poor on low or high beam resulting in poor visibility..Vehicle Identification Number (VIN):2FALP74WISX. Ford Crown Victoria 1995 problem was reported in PARADISE, TX. Vehicle was purchased on Aug 01, 1996. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Air BagsFord Crown Victoria 1995 Air Bags Review #833613 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with AIR BAGS . air bag warning light remains illuminated, indicating a malfunction within the system. dealer replaced the clock spring within the steering column which has not corrected the problem. *ak.Vehicle Identification Number (VIN):2FALP73W3SX. Ford Crown Victoria 1995 problem was reported in DETROIT, MI. Original Owner. Vehicle was purchased on Sept 01, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Suspension Front Control Arm Lower ArmFord Crown Victoria 1995 Suspension Front Control Arm Lower Arm Review #704016 FORD CROWN VICTORIA 1995 car safety problem was reported on Mar 01, 1999.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SUSPENSION:FRONT:CONTROL ARM:LOWER ARM . both lower control arms of this vehicle have failed and require replacement for safety. ford sates they have recalled 1997-1999 fords for the same defect and are unsure about extending the sefect recall to 1995. ford admits that both arms should not fail or need replacement..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W6SX. Ford Crown Victoria 1995 problem was reported in MONTGOMERY VILLAGE, MD. Vehicle was purchased on Mar 01, 1998. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph. Ford Crown Victoria 1995 Power Train Automatic TransmissionFord Crown Victoria 1995 Power Train Automatic Transmission Review #544428 FORD CROWN VICTORIA 1995 car safety problem was reported on Jan 27, 1997.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . hairline crack in the transmission case resulted in hard shifting of the transmission..Vehicle Identification Number (VIN):2FALP71W6SX. Ford Crown Victoria 1995 problem was reported in LOS ANELES, CA. Original Owner. Vehicle was purchased on May 01, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Power Train Automatic Transmission Torque ConverterFord Crown Victoria 1995 Power Train Automatic Transmission Torque Converter Review #705813 FORD CROWN VICTORIA 1995 car safety problem was reported on Apr 10, 1999.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION:TORQUE CONVERTER . car vibrates and gear shifts at low speed. i brought it to dealer and had transmission serviced. torque coverter will need to ber replaced, if it continues.Vehicle Identification Number (VIN):2FALP73W2SX. Ford Crown Victoria 1995 problem was reported in MANDEVILLE, LA. Original Owner. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 drive type:FWD. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 35 mph. Ford Crown Victoria 1995 Power Train Automatic Transmission Review #705813 FORD CROWN VICTORIA 1995 car safety problem was reported on Apr 10, 1999.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . car vibrates and gear shifts at low speed. i brought it to dealer and had transmission serviced. torque coverter will need to ber replaced, if it continues.Vehicle Identification Number (VIN):2FALP73W2SX. Ford Crown Victoria 1995 problem was reported in MANDEVILLE, LA. Original Owner. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 drive type:FWD. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 35 mph. Ford Crown Victoria 1995 Parking Brake Conventional Mechanical Linkage And CableFord Crown Victoria 1995 Parking Brake Conventional Mechanical Linkage And Cable Review #837626 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with PARKING BRAKE:CONVENTIONAL:MECHANICAL:LINKAGE AND CABLE . rear emergency parking brake cable clip has worn through the cable . this could result in emergency parking brake failure. cable is also rubbing against shock absorber causing a wear in a second location. manufacturer has not been notified. *ak.Vehicle Identification Number (VIN):2FALP74W8SX. Ford Crown Victoria 1995 problem was reported in PEABODY, MA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Engine And Engine Cooling Exhaust System Emission Control Gas Recirculation Valve (egr Valve)FORD CROWN VICTORIA 1995 car safety problem was reported on Apr 21, 1999.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:GAS RECIRCULATION VALVE (EGR VALVE) . my engine check light keeps going on. we have changed the pfe sensor, installed new egr sensor, and installed a new egr selenoid, along with changing the second sensor. still the "check engine" light goes on. i know when the light goes on because i can feel in when i excelerate. now i will be bring it to the mechanic for the 5 time next week. this egr has something to do with the air pollution, and it also effects my gas mileage. thank you for your time. *ak.Vehicle Identification Number (VIN):2FALP73W7SX. Ford Crown Victoria 1995 problem was reported in PORT ORANGE, FL. Original Owner. Vehicle was purchased on Jan 01, 1995. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. VEHICLE SPEED: 50 mph. Ford Crown Victoria 1995 Unknown Or OtherFord Crown Victoria 1995 Unknown Or Other Review #707374 FORD CROWN VICTORIA 1995 car safety problem was reported on Apr 21, 1999.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with UNKNOWN OR OTHER . my engine check light keeps going on. we have changed the pfe sensor, installed new egr sensor, and installed a new egr selenoid, along with changing the second sensor. still the "check engine" light goes on. i know when the light goes on because i can feel in when i excelerate. now i will be bring it to the mechanic for the 5 time next week. this egr has something to do with the air pollution, and it also effects my gas mileage. thank you for your time. *ak.Vehicle Identification Number (VIN):2FALP73W7SX. Ford Crown Victoria 1995 problem was reported in PORT ORANGE, FL. Original Owner. Vehicle was purchased on Jan 01, 1995. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. VEHICLE SPEED: 50 mph. Ford Crown Victoria 1995 Steering LinkagesFord Crown Victoria 1995 Steering Linkages Review #707539 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . loss of steering control, especially when changing lanes at highway speeds or making tight turns. can also occur when holding steering wheel straight. vehicle will have a noticeable "drift" or "shift" to either side, and seems quite dangerous. dealer found that a recall had been done (96s45), but that this vin was not included. the symptoms are exactly as described in recall 96s45. visuall inspection by mechanic verified that this was the problem, and that the vehicle is probably dangerous to drive..Vehicle Identification Number (VIN):2FALP71WXSX. Ford Crown Victoria 1995 problem was reported in ELLETTSVILLE, IN. Vehicle was purchased on May 01, 1999. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Ford Crown Victoria 1995 drive type:RWD. FUEL TYPE: GAS. Ford Crown Victoria 1995 Steering Linkages Review #707539 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . loss of steering control, especially when changing lanes at highway speeds or making tight turns. can also occur when holding steering wheel straight. vehicle will have a noticeable "drift" or "shift" to either side, and seems quite dangerous. dealer found that a recall had been done (96s45), but that this vin was not included. the symptoms are exactly as described in recall 96s45. visuall inspection by mechanic verified that this was the problem, and that the vehicle is probably dangerous to drive. *ak.Vehicle Identification Number (VIN):2FALP71WXSX. Ford Crown Victoria 1995 problem was reported in ELLETTSVILLE, IN. Vehicle was purchased on May 01, 1999. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Ford Crown Victoria 1995 drive type:RWD. FUEL TYPE: GAS. Ford Crown Victoria 1995 Steering Linkages Review #707539 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . loss of steering control, especially when changing lanes at highway speeds or making tight turns. can also occur when holding steering wheel straight. vehicle will have a noticeable "drift" or "shift" to either side, and seems quite dangerous. dealer found that a recall had been done (96s45), but that this vin was not included. the symptoms are exactly as described in recall 96s45. visuall inspection by mechanic verified that this was the problem, and that the vehicle is probably dangerous to drive. *ak.Vehicle Identification Number (VIN):2FALP71WXSX. Ford Crown Victoria 1995 problem was reported in ELLETTSVILLE, IN. Vehicle was purchased on May 01, 1999. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Ford Crown Victoria 1995 drive type:RWD. FUEL TYPE: GAS. Ford Crown Victoria 1995 Steering Linkages Review #707539 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . loss of steering control, especially when changing lanes at highway speeds or making tight turns. can also occur when holding steering wheel straight. vehicle will have a noticeable "drift" or "shift" to either side, and seems quite dangerous. dealer found that a recall had been done (96s45), but that this vin was not included. the symptoms are exactly as described in recall 96s45. visuall inspection by mechanic verified that this was the problem, and that the vehicle is probably dangerous to drive..Vehicle Identification Number (VIN):2FALP71WXSX. Ford Crown Victoria 1995 problem was reported in ELLETTSVILLE, IN. Vehicle was purchased on May 01, 1999. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Ford Crown Victoria 1995 drive type:RWD. FUEL TYPE: GAS. Ford Crown Victoria 1995 Electrical System Wiring Front UnderhoodFord Crown Victoria 1995 Electrical System Wiring Front Underhood Review #709380 FORD CROWN VICTORIA 1995 car safety problem was reported on Mar 18, 1999.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with ELECTRICAL SYSTEM:WIRING:FRONT UNDERHOOD . when it is raining outside (moist air /dew) when running the wipers for a period of time when you go to turn off the wipers they may stop in the center of the windsheild or all the way towards the outside of the (a pillar) you then have to either attempt to turn the switch on and off from high to low to off or low to off to attempt to retract them into there normal position.Vehicle Identification Number (VIN):2FALP71W3SX. Ford Crown Victoria 1995 problem was reported in COLUMBUS, OH. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. VEHICLE SPEED: 65 mph. Ford Crown Victoria 1995 Exterior Lighting Headlights SwitchFord Crown Victoria 1995 Exterior Lighting Headlights Switch Review #845340 FORD CROWN VICTORIA 1995 car safety problem was reported on July 13, 1999.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with EXTERIOR LIGHTING:HEADLIGHTS:SWITCH . headlight switch fails to work properly when turned on. would sometimes go on/off on its own. the electrical wires to the switch shorted out. *ak.Vehicle Identification Number (VIN):2FALP73W7SX. Ford Crown Victoria 1995 problem was reported in HARVEYS LAKE, PA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Power Train Automatic TransmissionFord Crown Victoria 1995 Power Train Automatic Transmission Review #847809 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . when driving at speeds between 30 and 40mph the vehicle loses power as if t transmission is slipping. dealer has not seen vehicle. *ak.Ford Crown Victoria 1995 problem was reported in WEST HARTFORD, CT. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Unknown Or OtherFord Crown Victoria 1995 Unknown Or Other Review #711564 FORD CROWN VICTORIA 1995 car safety problem was reported on July 25, 1998.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with UNKNOWN OR OTHER . no summary.Vehicle Identification Number (VIN):2FALP74W9SX. Ford Crown Victoria 1995 problem was reported in VERNON, CT. Original Owner. Vehicle was purchased on Oct 01, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. VEHICLE SPEED: 40 mph. Ford Crown Victoria 1995 Suspension Front Control ArmFord Crown Victoria 1995 Suspension Front Control Arm Review #548324 FORD CROWN VICTORIA 1995 car safety problem was reported on Aug 10, 1999.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SUSPENSION:FRONT:CONTROL ARM . design of ball joints causes them to not have greased insert which resulted in ball joint failing collapsing the left front end of vehicle and puncturing the left front tire. nlm.Ford Crown Victoria 1995 problem was reported in NORMAN, OK. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Visibility WindshieldFord Crown Victoria 1995 Visibility Windshield Review #547889 FORD CROWN VICTORIA 1995 car safety problem was reported on Apr 05, 1999.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with VISIBILITY:WINDSHIELD . possible design flaw of three windows on vehicle are inoperative. however, vehicle is out of warranty so repairs could not be done. *yc.Vehicle Identification Number (VIN):2FALP74W35X. Ford Crown Victoria 1995 problem was reported in NORTH LAS, NV. Vehicle was purchased on Feb 25, 1997. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 45 mph. Ford Crown Victoria 1995 Steering LinkagesFord Crown Victoria 1995 Steering Linkages Review #713040 FORD CROWN VICTORIA 1995 car safety problem was reported on Sept 09, 1999.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . no summary.Vehicle was involved in a crash. 1 person(s) were injured. Vehicle Identification Number (VIN):2FALP71W1SX. Ford Crown Victoria 1995 problem was reported in MEMPHIS, TN. Accident was reported to Police. Original Owner. Vehicle was purchased on Mar 01, 1995. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 drive type:RWD. FUEL TYPE: GAS. VEHICLE SPEED: 40 mph. Ford Crown Victoria 1995 Equipment Mechanical Carrier/rackFord Crown Victoria 1995 Equipment Mechanical Carrier/rack Review #715168 FORD CROWN VICTORIA 1995 car safety problem was reported on Nov 23, 1999.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with EQUIPMENT:MECHANICAL:CARRIER/RACK . the vehicle in front of me, due to a faulty strap/hook on the motorcycle carrier, lost its mountain bike. i could not stop in time, destroyed the bike and did slight damage to my bumper. please tell me if there are any controls or rules for the safe manufacture of bicycle carriers??.....thank you!.0 person(s) were injured. 0 person(s) died.Ford Crown Victoria 1995 problem was reported in BUCHANAN, NY. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 drive type:FWD. FUEL TYPE: GAS. VEHICLE SPEED: 50 mph. Ford Crown Victoria 1995 Visibility Glass, Side/rearFord Crown Victoria 1995 Visibility Glass, Side/rear Review #857849 FORD CROWN VICTORIA 1995 car safety problem was reported on Dec 15, 1997.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with VISIBILITY:GLASS, SIDE/REAR . both driver's and passenger's side windows were repaired on two occasions because the plastic cradle guide on bottom of glass kept breaking off. also, in need of repairs again. dealer notified. *ak *ml.Vehicle Identification Number (VIN):2FALP71W8SX. Ford Crown Victoria 1995 problem was reported in COLUMBIA, SC. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Service Brakes, Hydraulic Foundation Components DiscFord Crown Victoria 1995 Service Brakes, Hydraulic Foundation Components Disc Review #858198 FORD CROWN VICTORIA 1995 car safety problem was reported on Mar 08, 2000.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC . front brake rotors are worn out, and the pads are not on the spring plate. originally incorrectly installed. ford was told about the problem. but is not interested in hearing the problem. *ak.et..Vehicle Identification Number (VIN):2FALP74W0SX. Ford Crown Victoria 1995 problem was reported in WHITTIER, CA. Original Owner. Vehicle was purchased on Mar 01, 1995. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Suspension FrontFord Crown Victoria 1995 Suspension Front Review #720300 FORD CROWN VICTORIA 1995 car safety problem was reported on June 01, 1999.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SUSPENSION:FRONT . need parts replaced. no safety defect listed within summary. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP71W3SX. Ford Crown Victoria 1995 problem was reported in BARBOURVILLE, KY. Vehicle was purchased on Feb 01, 1999. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 Suspension Front Control ArmFord Crown Victoria 1995 Suspension Front Control Arm Review #859239 FORD CROWN VICTORIA 1995 car safety problem was reported on Mar 24, 2000.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SUSPENSION:FRONT:CONTROL ARM . while driving at 5 to 10 mph front passenger's side wheel came off due to ball joints coming apart. dealer has been contacted. *ak *ml.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP74W1SX. Ford Crown Victoria 1995 problem was reported in WARSAW, MO. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 5 mph. Ford Crown Victoria 1995 Steering LinkagesFord Crown Victoria 1995 Steering Linkages Review #859344 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . while driving ball joints/pitman arm malfunctioned. was no prior warning. vehicle was serviced by dealership before problem happened. steering linkages were defective after having vehicle checked. *ak.Vehicle Identification Number (VIN):FILL IN. Ford Crown Victoria 1995 problem was reported in GEORGETOWN, MA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Suspension Front Control ArmFord Crown Victoria 1995 Suspension Front Control Arm Review #859344 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SUSPENSION:FRONT:CONTROL ARM . while driving ball joints/pitman arm malfunctioned. was no prior warning. vehicle was serviced by dealership before problem happened. steering linkages were defective after having vehicle checked. *ak.Vehicle Identification Number (VIN):FILL IN. Ford Crown Victoria 1995 problem was reported in GEORGETOWN, MA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering LinkagesFord Crown Victoria 1995 Steering Linkages Review #859344 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . while driving ball joints/pitman arm malfunctioned. was no prior warning. vehicle was serviced by dealership before problem happened. steering linkages were defective after having vehicle checked. *ak.Vehicle Identification Number (VIN):FILL IN. Ford Crown Victoria 1995 problem was reported in GEORGETOWN, MA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Suspension Front Control ArmFord Crown Victoria 1995 Suspension Front Control Arm Review #861521 FORD CROWN VICTORIA 1995 car safety problem was reported on Feb 01, 1999.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SUSPENSION:FRONT:CONTROL ARM . front suspension was popping and getting tight. ball joints broke into two pieces, and the front of vehicle dropped down, totally disabling the vehicle. *ak.Vehicle Identification Number (VIN):2FALP74W5SX. Ford Crown Victoria 1995 problem was reported in OK, OK. Original Owner. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Steering LinkagesFord Crown Victoria 1995 Steering Linkages Review #862870 FORD CROWN VICTORIA 1995 car safety problem was reported on May 01, 2000.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . ball joint/ pitman arm separated, resulting in loss of steering.*ak.0 person(s) were injured. 0 person(s) died.Ford Crown Victoria 1995 problem was reported in PEABODY, MA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 0 mph. Ford Crown Victoria 1995 Steering Gear Box Shaft SectorFord Crown Victoria 1995 Steering Gear Box Shaft Sector Review #862870 FORD CROWN VICTORIA 1995 car safety problem was reported on May 01, 2000.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:GEAR BOX:SHAFT SECTOR . ball joint/ pitman arm separated, resulting in loss of steering.*ak.0 person(s) were injured. 0 person(s) died.Ford Crown Victoria 1995 problem was reported in PEABODY, MA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 0 mph. Ford Crown Victoria 1995 Fuel System, Gasoline Storage Tank AssemblyFord Crown Victoria 1995 Fuel System, Gasoline Storage Tank Assembly Review #865287 FORD CROWN VICTORIA 1995 car safety problem was reported on July 12, 2000.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY . gas is spilling out of gas tank between the filler neck and the fuel tank . consumer feels this may cause a fire if something ignites on the ground.*ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP74W8SX. Ford Crown Victoria 1995 problem was reported in WOODRIDGE, IL. Vehicle was purchased on Aug 01, 1998. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 0 mph. Ford Crown Victoria 1995 Suspension Front Springs Air Suspension SystemFord Crown Victoria 1995 Suspension Front Springs Air Suspension System Review #725925 FORD CROWN VICTORIA 1995 car safety problem was reported on July 22, 2000.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SUSPENSION:FRONT:SPRINGS:AIR SUSPENSION SYSTEM . check air suspension dash light. ride control module failure also in lincolns. high temprature suspect. please notify me. *ak.Vehicle Identification Number (VIN):2FALP74W2SX. Ford Crown Victoria 1995 problem was reported in LAKE HAVASU CITY, AZ. Original Owner. Vehicle was purchased on Jan 01, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph. Ford Crown Victoria 1995 Visibility WindshieldFord Crown Victoria 1995 Visibility Windshield Review #729451 FORD CROWN VICTORIA 1995 car safety problem was reported on Aug 26, 2000.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with VISIBILITY:WINDSHIELD . this is the second windshield failure due to stress cracks in less than five years on my 1995 ford crown victoria lx. i am reporting this so that it may prevent someone from becoming injured..Vehicle Identification Number (VIN):2FALP74W3SX. Ford Crown Victoria 1995 problem was reported in PHILADELPHIA, PA. Original Owner. Vehicle was purchased on Nov 01, 1995. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:FWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph. Ford Crown Victoria 1995 Service Brakes, Hydraulic AntilockFord Crown Victoria 1995 Service Brakes, Hydraulic Antilock Review #731004 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SERVICE BRAKES, HYDRAULIC:ANTILOCK . anti-lock brakes come on when ever they feel like it. been serviced many times, still having same problem. *ak.Vehicle Identification Number (VIN):2FALP74W5SX. Ford Crown Victoria 1995 problem was reported in LACKAWANNA, NY. Vehicle was purchased on June 01, 1998. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 Service Brakes, Hydraulic Antilock Review #873517 FORD CROWN VICTORIA 1995 car safety problem was reported on Apr 04, 2000.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SERVICE BRAKES, HYDRAULIC:ANTILOCK . consumer has had this abs problem for over 3 years. when the brakes are applied they make a horrifying grinding & rubbing sound. dealer says the only remedy is to replace the brake line. *ak.Vehicle Identification Number (VIN):NOT AVAILAB. Ford Crown Victoria 1995 problem was reported in GREENFIELD, TN. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Service Brakes, Hydraulic Foundation Components Hoses, Lines/piping, And FittingsFORD CROWN VICTORIA 1995 car safety problem was reported on Apr 04, 2000.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS . consumer has had this abs problem for over 3 years. when the brakes are applied they make a horrifying grinding & rubbing sound. dealer says the only remedy is to replace the brake line. *ak.Vehicle Identification Number (VIN):NOT AVAILAB. Ford Crown Victoria 1995 problem was reported in GREENFIELD, TN. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Electrical System IgnitionFord Crown Victoria 1995 Electrical System Ignition Review #734048 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with ELECTRICAL SYSTEM:IGNITION . ford crown victoria has hesitated on numerous ocassions. *ak.Vehicle Identification Number (VIN):2FALP74W2SX. Ford Crown Victoria 1995 problem was reported in LAKE HAVASU CITY, AZ. Vehicle was purchased on Oct 01, 1997. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 Exterior Lighting Turn Signal SwitchFord Crown Victoria 1995 Exterior Lighting Turn Signal Switch Review #875894 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with EXTERIOR LIGHTING:TURN SIGNAL:SWITCH . intermittently multi service switch malfunctioned. dealer has replaced multi service switch, problem has not reoccurred. *ak.Vehicle Identification Number (VIN):2FALP74W3SX. Ford Crown Victoria 1995 problem was reported in FT LAURDALE, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Steering Gear Box (other Than Rack And Pinion)Ford Crown Victoria 1995 Steering Gear Box (other Than Rack And Pinion) Review #742999 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:GEAR BOX (OTHER THAN RACK AND PINION) . this car has many failures. no safety defect listed. *ak.Vehicle Identification Number (VIN):2FALP71W6SX. Ford Crown Victoria 1995 problem was reported in MINTO, NC. Vehicle was purchased on Mar 01, 1998. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 Suspension Front Control Arm Lower ArmFord Crown Victoria 1995 Suspension Front Control Arm Lower Arm Review #744210 FORD CROWN VICTORIA 1995 car safety problem was reported on May 01, 1997.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SUSPENSION:FRONT:CONTROL ARM:LOWER ARM . severe front end noise is caused by the lower arms and the steering is off. rubber booty is torn and the front end makes loud "pop" when steering to the left or right turns. this problem has been with the car since purchased and has been to the dealer on 3 occasions were they say there is no problem. i had a garage look at it and they informed me that the ball joints and or thr arms needed to be replaced. the dealership tells me that there is no problem. my warranty ends soon and am wondering if there are other complaints like this.*ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP74W3SX. Ford Crown Victoria 1995 problem was reported in MELROSE, MA. Vehicle was purchased on Apr 01, 1997. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. VEHICLE SPEED: 5 mph. Ford Crown Victoria 1995 Tires Tread/beltFord Crown Victoria 1995 Tires Tread/belt Review #746606 FORD CROWN VICTORIA 1995 car safety problem was reported on June 08, 2001.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with TIRES:TREAD/BELT . tire suddenly lost all air pressure and sidewalls detached from face of tire. pressure was checked approximately 8 hours prior. i was enroute to emergency call. *ak (tiresize: 255/70/r15)( dot number: tire size: 255/70/r15 ).Ford Crown Victoria 1995 problem was reported in ORD, NE. Accident was reported to Police. Original Owner. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. VEHICLE SPEED: 80 mph. Ford Crown Victoria 1995 Communications Horn AssemblyFord Crown Victoria 1995 Communications Horn Assembly Review #747609 FORD CROWN VICTORIA 1995 car safety problem was reported on Oct 01, 1995.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with COMMUNICATIONS:HORN ASSEMBLY . horn is not loud enough and the horn buton is to small and hard to find when needed. in 1996 i noticed the button was changed by ford,so they knew it was a problem too. i think it should be replaced with a 1996 stering wheel or horn buttom assembly and the horn needs to be much louder. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP73W2SX. Ford Crown Victoria 1995 problem was reported in WACO, TX. Vehicle was purchased on Oct 01, 1995. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 Vehicle Speed ControlFord Crown Victoria 1995 Vehicle Speed Control Review #750091 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with VEHICLE SPEED CONTROL . car has hesitation, bucking, seems to acceletrate on its own. *ak.Ford Crown Victoria 1995 problem was reported in COLUMBIA, MD. Original Owner. Vehicle was purchased on June 01, 1995. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 drive type:FWD. FUEL TYPE: GAS. Ford Crown Victoria 1995 Vehicle Speed Control Review #750091 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with VEHICLE SPEED CONTROL . car has hesitation, bucking, seems to acceletrate on its own. *ak.Ford Crown Victoria 1995 problem was reported in COLUMBIA, MD. Original Owner. Vehicle was purchased on June 01, 1995. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 drive type:FWD. FUEL TYPE: GAS. Ford Crown Victoria 1995 Seats Front Assembly ReclinerFord Crown Victoria 1995 Seats Front Assembly Recliner Review #9003979 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SEATS:FRONT ASSEMBLY:RECLINER . i'm aware of seat belt latch failures(driver's side only) on several vehicles..Vehicle Identification Number (VIN):2FALP73W4SX. Ford Crown Victoria 1995 problem was reported in KOUTS, IN. Vehicle was purchased on Aug 20, 2001. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Visibility Power Window Devices And ControlsFord Crown Victoria 1995 Visibility Power Window Devices And Controls Review #755809 FORD CROWN VICTORIA 1995 car safety problem was reported on May 05, 1999.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with VISIBILITY:POWER WINDOW DEVICES AND CONTROLS . headlight lenses constantly turn yellow and cloudy, power window regulator cables constantly snap, excessive play in steering wheel, horn buttons too small and inconvienient and pop out at times, egr chamber always clogs every 40k miles and causes stalling condition. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP74W5SX. Ford Crown Victoria 1995 problem was reported in BELLEVILLE, IL. Vehicle was purchased on Mar 01, 1999. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 Steering Wheel And Handle BarFord Crown Victoria 1995 Steering Wheel And Handle Bar Review #755809 FORD CROWN VICTORIA 1995 car safety problem was reported on May 05, 1999.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:WHEEL AND HANDLE BAR . headlight lenses constantly turn yellow and cloudy, power window regulator cables constantly snap, excessive play in steering wheel, horn buttons too small and inconvienient and pop out at times, egr chamber always clogs every 40k miles and causes stalling condition. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP74W5SX. Ford Crown Victoria 1995 problem was reported in BELLEVILLE, IL. Vehicle was purchased on Mar 01, 1999. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 Communications Horn AssemblyFord Crown Victoria 1995 Communications Horn Assembly Review #755809 FORD CROWN VICTORIA 1995 car safety problem was reported on May 05, 1999.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with COMMUNICATIONS:HORN ASSEMBLY . headlight lenses constantly turn yellow and cloudy, power window regulator cables constantly snap, excessive play in steering wheel, horn buttons too small and inconvienient and pop out at times, egr chamber always clogs every 40k miles and causes stalling condition. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP74W5SX. Ford Crown Victoria 1995 problem was reported in BELLEVILLE, IL. Vehicle was purchased on Mar 01, 1999. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 Engine And Engine Cooling Exhaust System Emission Control Gas Recirculation Valve (egr Valve)FORD CROWN VICTORIA 1995 car safety problem was reported on May 05, 1999.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:GAS RECIRCULATION VALVE (EGR VALVE) . headlight lenses constantly turn yellow and cloudy, power window regulator cables constantly snap, excessive play in steering wheel, horn buttons too small and inconvienient and pop out at times, egr chamber always clogs every 40k miles and causes stalling condition. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP74W5SX. Ford Crown Victoria 1995 problem was reported in BELLEVILLE, IL. Vehicle was purchased on Mar 01, 1999. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 Exterior Lighting HeadlightsFord Crown Victoria 1995 Exterior Lighting Headlights Review #755809 FORD CROWN VICTORIA 1995 car safety problem was reported on May 05, 1999.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with EXTERIOR LIGHTING:HEADLIGHTS . headlight lenses constantly turn yellow and cloudy, power window regulator cables constantly snap, excessive play in steering wheel, horn buttons too small and inconvienient and pop out at times, egr chamber always clogs every 40k miles and causes stalling condition. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP74W5SX. Ford Crown Victoria 1995 problem was reported in BELLEVILLE, IL. Vehicle was purchased on Mar 01, 1999. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 Engine And Engine Cooling Engine Gasoline Belts And Associated PulleysFORD CROWN VICTORIA 1995 car safety problem was reported on May 27, 2002.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:BELTS AND ASSOCIATED PULLEYS . while driving down the interstate, i noticed a noise and strange feeling in the steering wheel. it felt like the car's engine had shut off. i pulled over, but the car was still running. however, the alternator light was on and there was no response from the power steering. upon examination, the serpentine belt had come off due to an apparent seizure of the tensioner pulley. it had melted and fallen off. the heat was great enough to leave drops of molten aluminum on the shroud underneath and the pulley itself was melted into it as well. my whole family was in the car at the time and we beleive that under other driving conditions or circumstances this could have caused a deadly crash. thank you for your time, lemuel justice. *ak.Vehicle Identification Number (VIN):2FALP74W4SX. Ford Crown Victoria 1995 problem was reported in SOUTHGATE, MI. Vehicle was purchased on June 01, 2099. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. VEHICLE SPEED: 70 mph. Ford Crown Victoria 1995 Suspension Front Control ArmFord Crown Victoria 1995 Suspension Front Control Arm Review #763354 FORD CROWN VICTORIA 1995 car safety problem was reported on Apr 01, 2002.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SUSPENSION:FRONT:CONTROL ARM . the front suspension ball joints were replaced at my cost. they had started squeaking and were worn badly. my mechanic suggests that the entire front suspension be rebuilt for safety because ford does not have grease joints on any these parts. when the horn button was pushed for longer than a few seconds, it used to blow the fuse. the last time it did this, it also disabled the cruise control. i was told by my mechanic the only fix was to replace the steering column where these wires were shorting together internally.*ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP74W5SX. Ford Crown Victoria 1995 problem was reported in TRENTON, TN. Original Owner. Vehicle was purchased on Oct 01, 2095. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. VEHICLE SPEED: 55 mph. Ford Crown Victoria 1995 Electrical System Fuses And Circuit BreakersFord Crown Victoria 1995 Electrical System Fuses And Circuit Breakers Review #763354 FORD CROWN VICTORIA 1995 car safety problem was reported on Apr 01, 2002.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with ELECTRICAL SYSTEM:FUSES AND CIRCUIT BREAKERS . the front suspension ball joints were replaced at my cost. they had started squeaking and were worn badly. my mechanic suggests that the entire front suspension be rebuilt for safety because ford does not have grease joints on any these parts. when the horn button was pushed for longer than a few seconds, it used to blow the fuse. the last time it did this, it also disabled the cruise control. i was told by my mechanic the only fix was to replace the steering column where these wires were shorting together internally.*ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP74W5SX. Ford Crown Victoria 1995 problem was reported in TRENTON, TN. Original Owner. Vehicle was purchased on Oct 01, 2095. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. VEHICLE SPEED: 55 mph. Ford Crown Victoria 1995 Vehicle Speed ControlFord Crown Victoria 1995 Vehicle Speed Control Review #763354 FORD CROWN VICTORIA 1995 car safety problem was reported on Apr 01, 2002.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with VEHICLE SPEED CONTROL . the front suspension ball joints were replaced at my cost. they had started squeaking and were worn badly. my mechanic suggests that the entire front suspension be rebuilt for safety because ford does not have grease joints on any these parts. when the horn button was pushed for longer than a few seconds, it used to blow the fuse. the last time it did this, it also disabled the cruise control. i was told by my mechanic the only fix was to replace the steering column where these wires were shorting together internally.*ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP74W5SX. Ford Crown Victoria 1995 problem was reported in TRENTON, TN. Original Owner. Vehicle was purchased on Oct 01, 2095. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. VEHICLE SPEED: 55 mph. Ford Crown Victoria 1995 Service Brakes, Hydraulic Foundation Components Hoses, Lines/piping, And FittingsFORD CROWN VICTORIA 1995 car safety problem was reported on July 07, 2002.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS . consumer applied brakes at 35 mph and the pedal went to the floor, no braking action. mechanic (friesmill auto repair) determined that the rear brake line had ruptured. rear brake lines were repaired. *ak *scc referenced in rq03-004.Vehicle Identification Number (VIN):2FALP74W9SX. Ford Crown Victoria 1995 problem was reported in TURNERSVILLE, NJ. Original Owner. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 35 mph. Ford Crown Victoria 1995 Steering LinkagesFord Crown Victoria 1995 Steering Linkages Review #8016104 FORD CROWN VICTORIA 1995 car safety problem was reported on May 15, 2001.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . steering had become erratic. dealer replaced steering linkage/ idler arm, and pitman arm. please provide additional information.*ak.Vehicle Identification Number (VIN):2FALP74W9SX. Ford Crown Victoria 1995 problem was reported in SUMMERDALE, NJ. Original Owner. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Steering Linkages Review #8016104 FORD CROWN VICTORIA 1995 car safety problem was reported on May 15, 2001.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . steering had become erratic. dealer replaced steering linkage/ idler arm, and pitman arm. please provide additional information.*ak.Vehicle Identification Number (VIN):2FALP74W9SX. Ford Crown Victoria 1995 problem was reported in SUMMERDALE, NJ. Original Owner. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Steering Linkages Arm Idler And AttachmentFord Crown Victoria 1995 Steering Linkages Arm Idler And Attachment Review #8016104 FORD CROWN VICTORIA 1995 car safety problem was reported on May 15, 2001.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES:ARM:IDLER AND ATTACHMENT . steering had become erratic. dealer replaced steering linkage/ idler arm, and pitman arm. please provide additional information.*ak.Vehicle Identification Number (VIN):2FALP74W9SX. Ford Crown Victoria 1995 problem was reported in SUMMERDALE, NJ. Original Owner. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 SuspensionFord Crown Victoria 1995 Suspension Review #8016265 FORD CROWN VICTORIA 1995 car safety problem was reported on Aug 01, 2002.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SUSPENSION . while driving between 35-55mph, the vehicle will shudder and vibrate excessively. *ak consumer has had the transmission fluid checked, also the no skip was checked. (neither has corrected the problem with the shuddering). *scc.Vehicle Identification Number (VIN):2FALP72W95X. Ford Crown Victoria 1995 problem was reported in STOKES, NC. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:FWD. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 55 mph. Ford Crown Victoria 1995 Suspension Front Control Arm Lower Ball JointFord Crown Victoria 1995 Suspension Front Control Arm Lower Ball Joint Review #8016101 FORD CROWN VICTORIA 1995 car safety problem was reported on Aug 10, 2002.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT . while driving 10 mph left front of vehicle dropped onto wheel. dealer determined lower ball joint broke.*ak.Vehicle Identification Number (VIN):2FALP74W9SX. Ford Crown Victoria 1995 problem was reported in SUMMERDALE, NJ. Original Owner. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Fuel System, Gasoline Storage Tank AssemblyFord Crown Victoria 1995 Fuel System, Gasoline Storage Tank Assembly Review #766727 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY . ford motor company was contacted by toll-free number.(no solution given). no safety defect listed. *ak.Vehicle Identification Number (VIN):2FALP71W2SX. Ford Crown Victoria 1995 problem was reported in PHARR, TX. Vehicle was purchased on Sept 01, 2002. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:FWD. FUEL TYPE: GAS. Ford Crown Victoria 1995 Fuel System, Gasoline Storage Tank Assembly Review #767018 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY . i own a vehicle driven by law enforcement. to date nothing has been done for the single owner. is this saying we are not going to have a similar condition occur?? attourny general sent a letter to the ford people. as yet no decision has been made. is the public to assume that another person has to lose life in order for this problem to be resolved.*ak.Vehicle was on fire. Vehicle Identification Number (VIN):2FALP74W2SX. Ford Crown Victoria 1995 problem was reported in LAKE HAVASU CITY, AZ. Vehicle was purchased on Sept 01, 2096. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1995 Suspension Front Control Arm Lower Ball JointFord Crown Victoria 1995 Suspension Front Control Arm Lower Ball Joint Review #767325 FORD CROWN VICTORIA 1995 car safety problem was reported on Sept 01, 2002.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT . first of all i am not sure of the month we bought the car but it was in 1996. this is what happened.my daughter was over at the oregon coast and had just pulled out of a parking lot when the left front lower ball joint came apart and the front wheel collapsed inward. luckily no one was injured and there was no body damaged. i called the dealership to find out if there was a recall notice for the vehicle. they said that there was not. on your web site i found two (2) recalls summarys: nhtsa campaign id numbers : 98v322000 and 96v135000. these deal with the lower control arm ball joints and the pitman arms on the 1995 ford crown victoria. i asked the dealers in newport, or. and junction city, or and they claimed no knowledge of either one. in addition i was given an number for the main customer service office for ford back east. they didn't acknowledge the recalls either. both dealers i talked to suggested replacing all four of the ball joints (upper and lower) which i did. it cost $561.63. i had a towing bill of $142.00 and a cab bill of $57.75. i asked the dealer to be reimbursed at least of the repair and towing bills. they refused. if my daughter had been driving along at 55 mph and the ball joint came apart she could have been killed. if i had been driving the car and it came apart, i could have been killed. i have talked to several mechanics and they claim that this shouldn't have happened given the year of the car and miles driven. i feel that ford motor company should pay the repair bill at least. if this happened to me, it could happen to other owners of the 1995 crown victoria's, and it seems to have already since you have recalls summarys concerning them.*ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP74W9SX. Ford Crown Victoria 1995 problem was reported in EUGENE, OR. Vehicle was purchased on June 01, 2096. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 drive type:RWD. FUEL TYPE: GAS. VEHICLE SPEED: 2 mph. Ford Crown Victoria 1995 Fuel System, Gasoline Storage Tank AssemblyFord Crown Victoria 1995 Fuel System, Gasoline Storage Tank Assembly Review #8019871 FORD CROWN VICTORIA 1995 car safety problem was reported on Sept 30, 2002.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY . consumer states contacted dlr regarding ford fuel tank modification. consumer advised that vehicle was previously and police fleet car. dlr advised still will not make modification because car is not currently being used as a police car. nlm.Vehicle Identification Number (VIN):2FALP71W2SX. Ford Crown Victoria 1995 problem was reported in PLAINVIEW, TX. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Unknown Or OtherFord Crown Victoria 1995 Unknown Or Other Review #8023028 FORD CROWN VICTORIA 1995 car safety problem was reported on Sept 20, 2002.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with UNKNOWN OR OTHER . while driving, when consumer applied brakes vehicle continued to accelerate. this resulted in consumer losing control of vehicle and running into a tree. please provide more details. ts.Vehicle Identification Number (VIN):2FALT74WTSX. Ford Crown Victoria 1995 problem was reported in MEMPHIS, TN. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Fuel System, GasolineFord Crown Victoria 1995 Fuel System, Gasoline Review #10009504 FORD CROWN VICTORIA 1995 car safety problem was reported on Sept 30, 2002.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with FUEL SYSTEM, GASOLINE . subject regarding fuel system upgrade for ford. *dt *jb.Ford Crown Victoria 1995 problem was reported in PLAINVIEW, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Power Train Automatic TransmissionFord Crown Victoria 1995 Power Train Automatic Transmission Review #10010929 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . transmission slips for a second or two when accelerating from a standing start intermittently. car was serviced for this symptom once under warranty and again in sep. 2001. began experiencing symptom again, not sure of exact date. latest occurred on or about 3/13/2003. *jb.0 person(s) were injured. 0 person(s) died.Mileage was 34800 miles. Vehicle Identification Number (VIN):2FALP73W5SX. Ford Crown Victoria 1995 problem was reported in BIRMINGHAM, AL. Original Owner. Vehicle was purchased on Dec 02, 1994. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Vehicle had 8 CYLINDERS. Ford Crown Victoria 1995 drive type:RWD. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 5 mph. Ford Crown Victoria 1995 Fuel System, Gasoline Storage Tank Assembly Filler Pipe And CapFORD CROWN VICTORIA 1995 car safety problem was reported on Jan 27, 2003.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP . the fuel pipe leaked, which caused a strong smell of fuel . dealer notified. *ak *cb *jb.Mileage was 62000 miles. Vehicle Identification Number (VIN):2FALP74DXSX. Ford Crown Victoria 1995 problem was reported in DEKALB, IL. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 8 CYLINDERS. Ford Crown Victoria 1995 drive type:RWD. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Seat Belts Front Buckle AssemblyFord Crown Victoria 1995 Seat Belts Front Buckle Assembly Review #10031319 FORD CROWN VICTORIA 1995 car safety problem was reported on July 13, 2003.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SEAT BELTS:FRONT:BUCKLE ASSEMBLY . consumer states that drivers seat belt does not lock. delaer notified.*ak.Ford Crown Victoria 1995 problem was reported in SOUTH MILWAUKEE, WI. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Fuel System, Gasoline Storage Tank AssemblyFord Crown Victoria 1995 Fuel System, Gasoline Storage Tank Assembly Review #10029524 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY . the consumer was concerned about rear-end collision fires regarding the crown victoria's. *ph *jb.Ford Crown Victoria 1995 problem was reported in LAUREL, MD. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. DEALER'S NAME: UNKNOWN . Ford Crown Victoria 1995 Suspension FrontFord Crown Victoria 1995 Suspension Front Review #10033628 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SUSPENSION:FRONT . while parking consumer heard a clunk noise and steering became very loose, and front wheels would not turn. cause unknown. *ak.Mileage was 45000 miles. Vehicle Identification Number (VIN):2FALP74W9SX. Ford Crown Victoria 1995 problem was reported in CARMEL, IN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Service Brakes, HydraulicFord Crown Victoria 1995 Service Brakes, Hydraulic Review #10034311 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SERVICE BRAKES, HYDRAULIC . driver side seat belt is inoperative. belt will either, not fasten or will release while fastened. cause of the failure is undetermined. also hile driving and brake pedal depressed, the pedal will "surge against driver's feet". when this occurs vehicle fails to stop, causing extended stopping distance.*ak.Mileage was 20000 miles. Ford Crown Victoria 1995 problem was reported in NOEL, MO. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Seat Belts Front RetractorFord Crown Victoria 1995 Seat Belts Front Retractor Review #10034311 FORD CROWN VICTORIA 1995 car safety problem was reported on .FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SEAT BELTS:FRONT:RETRACTOR . driver side seat belt is inoperative. belt will either, not fasten or will release while fastened. cause of the failure is undetermined. also hile driving and brake pedal depressed, the pedal will "surge against driver's feet". when this occurs vehicle fails to stop, causing extended stopping distance.*ak.Mileage was 20000 miles. Ford Crown Victoria 1995 problem was reported in NOEL, MO. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Exterior Lighting Headlights Concealment DevicesFord Crown Victoria 1995 Exterior Lighting Headlights Concealment Devices Review #10046504 FORD CROWN VICTORIA 1995 car safety problem was reported on Oct 14, 2003.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with EXTERIOR LIGHTING:HEADLIGHTS:CONCEALMENT DEVICES . the headlight plastic cover turned yellow making it hard for the consumer to see. the lights had to be turned on high. *ak *scc *jb.Mileage was 100000 miles. Vehicle Identification Number (VIN):2FALP72W8SX. Ford Crown Victoria 1995 problem was reported in ETOILE, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. Ford Crown Victoria 1995 drive type:RWD. FUEL TYPE: GAS. Ford Crown Victoria 1995 Service Brakes, Air Supply Hoses, Lines/piping, And FittingsFORD CROWN VICTORIA 1995 car safety problem was reported on Mar 15, 2004.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SERVICE BRAKES, AIR:SUPPLY:HOSES, LINES/PIPING, AND FITTINGS . steel brake lines to both rear brake cylinders developed leaks causing almost total loss of breaking. both leaks occurred along the frame member at the midpoint of the chassis..Mileage was 145000 miles. Vehicle Identification Number (VIN):2FALP72W6SX. Ford Crown Victoria 1995 problem was reported in NEW HOPE, MN. Vehicle was purchased on Feb 02, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 8 CYLINDERS. Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 40 mph. Ford Crown Victoria 1995 Steering LinkagesFord Crown Victoria 1995 Steering Linkages Review #10095854 FORD CROWN VICTORIA 1995 car safety problem was reported on Mar 01, 2001.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . sudden failure of ball joints in ford passenger cars.*jb.Vehicle was involved in a crash. 0 person(s) were injured. 0 person(s) died.Mileage was 70000 miles. Ford Crown Victoria 1995 problem was reported in EVERETT, MA. Vehicle was purchased on June 09, 1999. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 8 CYLINDERS. Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 20 mph. Ford Crown Victoria 1995 Suspension Front Control Arm Upper Ball JointFord Crown Victoria 1995 Suspension Front Control Arm Upper Ball Joint Review #10095854 FORD CROWN VICTORIA 1995 car safety problem was reported on Mar 01, 2001.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SUSPENSION:FRONT:CONTROL ARM:UPPER BALL JOINT . sudden failure of ball joints in ford passenger cars.*jb.Vehicle was involved in a crash. 0 person(s) were injured. 0 person(s) died.Mileage was 70000 miles. Ford Crown Victoria 1995 problem was reported in EVERETT, MA. Vehicle was purchased on June 09, 1999. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 8 CYLINDERS. Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 20 mph. Ford Crown Victoria 1995 Suspension Front Control Arm Lower Ball JointFord Crown Victoria 1995 Suspension Front Control Arm Lower Ball Joint Review #10095854 FORD CROWN VICTORIA 1995 car safety problem was reported on Mar 01, 2001.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT . sudden failure of ball joints in ford passenger cars.*jb.Vehicle was involved in a crash. 0 person(s) were injured. 0 person(s) died.Mileage was 70000 miles. Ford Crown Victoria 1995 problem was reported in EVERETT, MA. Vehicle was purchased on June 09, 1999. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 8 CYLINDERS. Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 20 mph. Ford Crown Victoria 1995 Service Brakes, Air AntilockFord Crown Victoria 1995 Service Brakes, Air Antilock Review #10095935 FORD CROWN VICTORIA 1995 car safety problem was reported on Oct 01, 2004.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SERVICE BRAKES, AIR:ANTILOCK . anti-lock brake system constantly cycles and ceates a hazardous condition by reducing braking power on smooth dry roads..0 person(s) were injured. 0 person(s) died.Mileage was 80000 miles. Ford Crown Victoria 1995 problem was reported in EVERETT, MA. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 5 mph. Ford Crown Victoria 1995 Vehicle Speed Control Cruise ControlFord Crown Victoria 1995 Vehicle Speed Control Cruise Control Review #10113192 FORD CROWN VICTORIA 1995 car safety problem was reported on Feb 26, 2005.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with VEHICLE SPEED CONTROL:CRUISE CONTROL . while vehicle was parked it caught on fire. consumer stated the fire started in the engine compartment near the battery. it was the very same issue as the recall stated. *ak.Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP74W4SX. Ford Crown Victoria 1995 problem was reported in SALEM, NJ. Accident was reported to Police. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Service Brakes, Hydraulic Foundation Components Hoses, Lines/piping, And FittingsFORD CROWN VICTORIA 1995 car safety problem was reported on Feb 23, 2005.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS . while the vehicle was in the repair shop to have its tires rotated the mechanic informed and showed the consumer that all the metal brake lines were corroded, and needed to be replaced.*ak.0 person(s) were injured. 0 person(s) died.Mileage was 82990 miles. Vehicle Identification Number (VIN):2FALP74W9SX. Ford Crown Victoria 1995 problem was reported in NORTH OLMSTED, OH. Vehicle was purchased on Sept 06, 1996. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Vehicle had 8 CYLINDERS. Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Vehicle Speed Control Cruise ControlFord Crown Victoria 1995 Vehicle Speed Control Cruise Control Review #10117019 FORD CROWN VICTORIA 1995 car safety problem was reported on Feb 25, 2005.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with VEHICLE SPEED CONTROL:CRUISE CONTROL . while driving at 65 mph cruise control safety switch failed. consumer parked the vehicle in driveway and the wiring caught on fire after being parked for about five to ten minutes. consumer extinguished the fire, and vehicle was towed to dealer.*ak.Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Mileage was 118000 miles. Ford Crown Victoria 1995 problem was reported in DULUTH, GA. Accident was reported to Police. Original Owner. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 drive type:U. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 65 mph. DEALER'S NAME: GWINNETTE PLACE MALL FORD . DEALER'S CITY: DULUTH . DEALER'S STATE CODE: GA. DEALER'S ZIPCODE: 30096 . Ford Crown Victoria 1995 Service Brakes, Air Antilock Wheel Speed SensorFord Crown Victoria 1995 Service Brakes, Air Antilock Wheel Speed Sensor Review #10120186 FORD CROWN VICTORIA 1995 car safety problem was reported on Apr 30, 2005.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SERVICE BRAKES, AIR:ANTILOCK:WHEEL SPEED SENSOR . constant abs failure caused by sensor and steel ring rust in brake system. problem causes activation of abs system without regard to speed, conditions or any braking effectiveness. abs pump may run at any time the brakes are applied causing increased stopping distance on smooth dry roads..0 person(s) were injured. 0 person(s) died.Mileage was 98007 miles. Vehicle Identification Number (VIN):2FALP73WXSX. Ford Crown Victoria 1995 problem was reported in EVERETT, MA. Vehicle was purchased on Apr 09, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 8 CYLINDERS. Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 10 mph. Ford Crown Victoria 1995 Steering Hydraulic Power Assist PumpFord Crown Victoria 1995 Steering Hydraulic Power Assist Pump Review #10126155 FORD CROWN VICTORIA 1995 car safety problem was reported on June 20, 2005.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:HYDRAULIC POWER ASSIST:PUMP . i saw smoke coming from a cylinder under the brake booster. i then checked under the hood,the smoke simmerd and went out. just ariving home from work ,i said ill get it checked out tomorow. two hours later a neighbor knocked at the door, and said your car is on fire. .Vehicle was on fire. Vehicle Identification Number (VIN):2FALP71W0SX. Ford Crown Victoria 1995 problem was reported in LAUDERHILL, FL. Accident was reported to Police. Vehicle was purchased on Mar 01, 2005. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 8 CYLINDERS. Ford Crown Victoria 1995 drive type:U. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Steering Hydraulic Power Assist Hose, Piping, And ConnectionsFORD CROWN VICTORIA 1995 car safety problem was reported on June 20, 2005.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:HYDRAULIC POWER ASSIST:HOSE, PIPING, AND CONNECTIONS . i saw smoke coming from a cylinder under the brake booster. i then checked under the hood,the smoke simmerd and went out. just ariving home from work ,i said ill get it checked out tomorow. two hours later a neighbor knocked at the door, and said your car is on fire. .Vehicle was on fire. Vehicle Identification Number (VIN):2FALP71W0SX. Ford Crown Victoria 1995 problem was reported in LAUDERHILL, FL. Accident was reported to Police. Vehicle was purchased on Mar 01, 2005. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 8 CYLINDERS. Ford Crown Victoria 1995 drive type:U. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Steering LinkagesFord Crown Victoria 1995 Steering Linkages Review #10126155 FORD CROWN VICTORIA 1995 car safety problem was reported on June 20, 2005.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with STEERING:LINKAGES . i saw smoke coming from a cylinder under the brake booster. i then checked under the hood,the smoke simmerd and went out. just ariving home from work ,i said ill get it checked out tomorow. two hours later a neighbor knocked at the door, and said your car is on fire. .Vehicle was on fire. Vehicle Identification Number (VIN):2FALP71W0SX. Ford Crown Victoria 1995 problem was reported in LAUDERHILL, FL. Accident was reported to Police. Vehicle was purchased on Mar 01, 2005. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 8 CYLINDERS. Ford Crown Victoria 1995 drive type:U. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1995 Electrical SystemFord Crown Victoria 1995 Electrical System Review #10133305 FORD CROWN VICTORIA 1995 car safety problem was reported on July 26, 2005.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with ELECTRICAL SYSTEM . dt: contact states on 7-26-05 1995 crown victoria caught on fire. smoke and fire came from the hazard switch and the directional signal switches. on 1-16-04 signals would not work so she had a multi-functional switch put on. the covering on the steering column were destroyed and all of the wiring inside had to be replaced. the fire department. was not called.*ak .Vehicle was on fire. Mileage was 86499 miles. Vehicle Identification Number (VIN):2FALP73W5SX. Ford Crown Victoria 1995 problem was reported in WHITE HALL, MI. Accident was reported to Police. Vehicle was purchased on Mar 01, 2001. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Vehicle had 8 CYLINDERS. Ford Crown Victoria 1995 drive type:FWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. DEALER'S NAME: FORD . Ford Crown Victoria 1995 Suspension Front Control Arm Lower Ball JointFord Crown Victoria 1995 Suspension Front Control Arm Lower Ball Joint Review #10139655 FORD CROWN VICTORIA 1995 car safety problem was reported on Oct 01, 2005.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT . dt: the front suspension lower control arm lower ball joints separated. this happened while driving 35 mph. there was a tiny bump in the road and the vehicle tilted to the right side lane. the vehicle was slanted to that side. there was a loss of steering. the vehicle was immobile at that time. a tow truck towed the vehicle to the contact's house and later to a mechanic. a recall was issued concerning the front suspension lower control arm lower ball joints. the contacts vehicle was not included in the recall due to vin although the contact's vehicle experienced a similar problem. the mechanic replaced both lower ball joints. *ak .Mileage was 250000 miles. Vehicle Identification Number (VIN):2FALP71W6SX. Ford Crown Victoria 1995 problem was reported in TAMPA, FL. Vehicle was purchased on June 01, 2003. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 8 CYLINDERS. Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 35 mph. DEALER'S NAME: REPOSSESION AGENCY . DEALER'S CITY: TAMPA . DEALER'S STATE CODE: FL. Ford Crown Victoria 1995 Service Brakes, Hydraulic Foundation Components Hoses, Lines/piping, And FittingsFORD CROWN VICTORIA 1995 car safety problem was reported on Feb 23, 2005.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS . 1995 crown victoria right rear brake line failed and resulted in fluid leakage because of corrosion on line and line fitting. *ts *nm (12/01/05) *sc .Mileage was 43700 miles. Vehicle Identification Number (VIN):2FALP74WXSY. Ford Crown Victoria 1995 problem was reported in SEABROOK, NH. Vehicle was purchased on Sept 01, 1996. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 8 CYLINDERS. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 30 mph. DEALER'S NAME: HAMPTON FORD . DEALER'S CITY: NORTH HAMPTON . DEALER'S STATE CODE: NH. DEALER'S ZIPCODE: 03862 . Ford Crown Victoria 1995 Fuel System, Gasoline DeliveryFord Crown Victoria 1995 Fuel System, Gasoline Delivery Review #10145316 FORD CROWN VICTORIA 1995 car safety problem was reported on Dec 01, 2005.FORD CROWN VICTORIA 1995, manufactured by FORD MOTOR COMPANY had a problem with FUEL SYSTEM, GASOLINE:DELIVERY . dt: the contact states there is a nhtsa recall campaign id 02i003000 concerning the fuel neck of the gas tank. this vehicle has the same problems as indicated in the recall. the manufacturer said this vehicle's was not included in the recall because it was no longer used by law enforcement. the vehicle has not been repaired at this time. *ak updated 1/25/2006 - *nm.0 person(s) were injured. 0 person(s) died.Mileage was 97000 miles. Vehicle Identification Number (VIN):2FALP71W2SX. Ford Crown Victoria 1995 problem was reported in GOODFELLOW AIR FORCE BASE, TX. Vehicle was purchased on Sept 01, 2005. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 8 CYLINDERS. Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. DEALER'S NAME: PRIVATE OWNER . Ford Crown Victoria 1995 Service Brakes, Hydraulic Foundation Components Hoses, Lines/piping, And FittingsFORD CROWN VICTORIA 1995 car safety problem was reported on Jan 26, 2006.FORD CROWN VICTORIA 1995, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS . dt*: the contact stated while driving the vehicle at 8 mph, the brake light illuminated. the contact depressed the brake pedal. there were no brakes; the vehicle was driven home without any brakes. upon inspection of the master cylinder the brake fluid was 3/4 empty. the vehicle was inspected further and the problem was the tubing that holds the brake fluid was corroded and cracked, causing the fluid to leak out. the manufacturer was alerted. updated 2/13/2006 - *nm.Mileage was 78000 miles. Vehicle Identification Number (VIN):2FALP73W5SX. Ford Crown Victoria 1995 problem was reported in COLUMBUS, OH. Original Owner. Vehicle was purchased on Dec 07, 1994. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 8 CYLINDERS. Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 8 mph. DEALER'S NAME: GRAHAM FORD . DEALER'S CITY: COLUMBUS . DEALER'S STATE CODE: OH. FORD CROWN VICTORIA 1995 car safety problem was reported on Feb 02, 2006.FORD CROWN VICTORIA 1995, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS . brake line rusted through causing rear brakes to fail. the brake line piping should either be made of stainless steel, or coated with a rust preventative, or shielded in some way so water/snow/road salt can not get between it and the frame of the car, causing it to rust through. this isn't rocket science !!!!!!!! *nm.0 person(s) were injured. 0 person(s) died.Mileage was 138288 miles. Vehicle Identification Number (VIN):2FALP73W2SX. Ford Crown Victoria 1995 problem was reported in TRAFFORD, PA. Vehicle was purchased on Apr 21, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 8 CYLINDERS. Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 15 mph. Ford Crown Victoria 1995 Suspension FrontFord Crown Victoria 1995 Suspension Front Review #10167395 FORD CROWN VICTORIA 1995 car safety problem was reported on July 30, 2006.FORD CROWN VICTORIA 1995, manufactured by FORD MOTOR COMPANY had a problem with SUSPENSION:FRONT . 1. i had just backed out of a parking spot, finished turning the car around to face forward and began approaching exit out of parking lot. i estimate speed at the moment of failure was less than five (5) mph. it is very fortunate that i was not going faster or i could have lost control of the crown vic, been killed, or killed someone else. as i began to approach the exit, i heard a sound of metal dragging on the street. i thought i accidentally ran over a metal shopping cart or someone on a bicycle. this is the type of metallic, dragging sound i heard. 2. right-front wheel fell off of car while approaching exit. i looked under my car just after the incident occurred, within approximately one or two minutes as it was then disabled in the lot. i observed ball joint had popped out. 3. ford replaced the following parts: arm asy fmc xw1z 3078 ba, kit-ste fmc f8az 3050 aa, joint asy fmcf7az 3049 aa, link fmc* f6az 5k484 aa, shield fmc* f5az 2k004 a, kit-sho fmc f8az 18124 ha, link spo* f6az 5k484 aa. i do not personally have any of the old parts that were replaced, perhaps ford does. *nm .Mileage was 197342 miles. Vehicle Identification Number (VIN):2FALP74W3SX. Ford Crown Victoria 1995 problem was reported in PHILADELPHIA, PA. Original Owner. Vehicle was purchased on Nov 20, 1995. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Vehicle had 8 CYLINDERS. Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 2 mph. Ford Crown Victoria 1995 Service Brakes, Hydraulic Foundation Components Hoses, Lines/piping, And FittingsFORD CROWN VICTORIA 1995 car safety problem was reported on Jan 17, 2007.FORD CROWN VICTORIA 1995, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS . the brake fluid in my 1995 ford crown victoria had to be topped off last week. the red brake light came on indicating the fluid was low. after filling the fluid and driving the car, the pedal felt a little on the soft side, but no light. on my way to work today, i was 2 miles from home and went to apply the brakes. i had no brakes whatsoever. the pedal did have some feel to it, but there was absolutely no brakes. luckily, i veered off the road avoiding a collision with a car, and had to downshift the car to get it to slow down. after getting the car to 5 or so mph, i shifted into reverse to stop the car, then park. the red brake light never came on and i had no warning of the failed brakes. after inspection, i found both brake lines to be rusted out on the drivers side frame rail. all brake lines on the car were inspected and are extremely rusty. the car is inoperable and has not been repaired as of yet. *jb.0 person(s) were injured. 0 person(s) died.Mileage was 117200 miles. Vehicle Identification Number (VIN):2FALP71W4SX. Ford Crown Victoria 1995 problem was reported in SHELBY TOWNSHIP, MI. Vehicle was purchased on Nov 30, 2006. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 8 CYLINDERS. Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 50 mph. Ford Crown Victoria 1995 Suspension Front Control Arm Upper Ball JointFord Crown Victoria 1995 Suspension Front Control Arm Upper Ball Joint Review #10188027 FORD CROWN VICTORIA 1995 car safety problem was reported on Aug 11, 2003.FORD CROWN VICTORIA 1995, manufactured by FORD MOTOR COMPANY had a problem with SUSPENSION:FRONT:CONTROL ARM:UPPER BALL JOINT . tl*the contact owns a 1995 ford crown victoria. the vehicle had the same failure as mentioned in recall # 96v135000. in 2003, the vehicle accelerated, but the contact was unable to turn the steering wheel. the contact shut the vehicle off, and had it towed to the personal mechanic. the mechanic stated that the ball joints were corroded and detached from the sockets. in addition, the pitman arms were not lubricated. the manufacturer stated that there were no recalls on the vehicle. on april 8, 2007, the vehicle was involved in a crash. the insurance company checked the vehicle's history and stated that the vehicle was included in a recall. the contact called the manufacturer again, and was still being informed that there was never a recall on the vehicle. the current mileage was 89,200, and failure mileage was 49,200. *ak the consumer states that there are 2 recalls for this specific car which are 98v322000 and the recall for steering listed above. the consumer states that the car was totaled while running into a ditch. update 05/04/07*tr .Vehicle was involved in a crash. 0 person(s) were injured. 0 person(s) died.Mileage was 49200 miles. Vehicle Identification Number (VIN):2FALP74W9SX. Ford Crown Victoria 1995 problem was reported in CARMEL, IN. Accident was reported to Police. Vehicle was purchased on Mar 15, 1997. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 8 CYLINDERS. Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. DEALER'S NAME: DELLEN LINCOLN MERCURY- NO LONGER IN BUS. DEALER'S CITY: CARMEL . DEALER'S STATE CODE: IN. DEALER'S ZIPCODE: 46033 . Ford Crown Victoria 1995 Suspension Front Control Arm Lower Ball JointFord Crown Victoria 1995 Suspension Front Control Arm Lower Ball Joint Review #10188027 FORD CROWN VICTORIA 1995 car safety problem was reported on Aug 11, 2003.FORD CROWN VICTORIA 1995, manufactured by FORD MOTOR COMPANY had a problem with SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT . tl*the contact owns a 1995 ford crown victoria. the vehicle had the same failure as mentioned in recall # 96v135000. in 2003, the vehicle accelerated, but the contact was unable to turn the steering wheel. the contact shut the vehicle off, and had it towed to the personal mechanic. the mechanic stated that the ball joints were corroded and detached from the sockets. in addition, the pitman arms were not lubricated. the manufacturer stated that there were no recalls on the vehicle. on april 8, 2007, the vehicle was involved in a crash. the insurance company checked the vehicle's history and stated that the vehicle was included in a recall. the contact called the manufacturer again, and was still being informed that there was never a recall on the vehicle. the current mileage was 89,200, and failure mileage was 49,200. *ak the consumer states that there are 2 recalls for this specific car which are 98v322000 and the recall for steering listed above. the consumer states that the car was totaled while running into a ditch. update 05/04/07*tr .Vehicle was involved in a crash. 0 person(s) were injured. 0 person(s) died.Mileage was 49200 miles. Vehicle Identification Number (VIN):2FALP74W9SX. Ford Crown Victoria 1995 problem was reported in CARMEL, IN. Accident was reported to Police. Vehicle was purchased on Mar 15, 1997. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 8 CYLINDERS. Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. DEALER'S NAME: DELLEN LINCOLN MERCURY- NO LONGER IN BUS. DEALER'S CITY: CARMEL . DEALER'S STATE CODE: IN. DEALER'S ZIPCODE: 46033 . Ford Crown Victoria 1995 Steering LinkagesFord Crown Victoria 1995 Steering Linkages Review #10188027 FORD CROWN VICTORIA 1995 car safety problem was reported on Aug 11, 2003.FORD CROWN VICTORIA 1995, manufactured by FORD MOTOR COMPANY had a problem with STEERING:LINKAGES . tl*the contact owns a 1995 ford crown victoria. the vehicle had the same failure as mentioned in recall # 96v135000. in 2003, the vehicle accelerated, but the contact was unable to turn the steering wheel. the contact shut the vehicle off, and had it towed to the personal mechanic. the mechanic stated that the ball joints were corroded and detached from the sockets. in addition, the pitman arms were not lubricated. the manufacturer stated that there were no recalls on the vehicle. on april 8, 2007, the vehicle was involved in a crash. the insurance company checked the vehicle's history and stated that the vehicle was included in a recall. the contact called the manufacturer again, and was still being informed that there was never a recall on the vehicle. the current mileage was 89,200, and failure mileage was 49,200. *ak the consumer states that there are 2 recalls for this specific car which are 98v322000 and the recall for steering listed above. the consumer states that the car was totaled while running into a ditch. update 05/04/07*tr .Vehicle was involved in a crash. 0 person(s) were injured. 0 person(s) died.Mileage was 49200 miles. Vehicle Identification Number (VIN):2FALP74W9SX. Ford Crown Victoria 1995 problem was reported in CARMEL, IN. Accident was reported to Police. Vehicle was purchased on Mar 15, 1997. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 8 CYLINDERS. Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. DEALER'S NAME: DELLEN LINCOLN MERCURY- NO LONGER IN BUS. DEALER'S CITY: CARMEL . DEALER'S STATE CODE: IN. DEALER'S ZIPCODE: 46033 . Ford Crown Victoria 1995 Vehicle Speed Control Cruise ControlFord Crown Victoria 1995 Vehicle Speed Control Cruise Control Review #10202051 FORD CROWN VICTORIA 1995 car safety problem was reported on Jan 01, 2006.FORD CROWN VICTORIA 1995, manufactured by FORD MOTOR COMPANY had a problem with VEHICLE SPEED CONTROL:CRUISE CONTROL . tl*the contact owns a 1995 ford crown victoria. while the vehicle was parked in the carport, the middle of the steering wheel melted from the air bag module inside of the steering wheel. as a result, the air bag is hanging from the steering wheel and there is a strong smell present from the air bag melting the steering wheel. the contact received a recall notice for the cruise control, however, the dealer and manufacturer stated that there were no recalls for this defect. the vehicle has not been repaired. the nhtsa campaign id number and powertrain were unknown. the failure and current mileages were 147,000. .Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Mileage was 147000 miles. Vehicle Identification Number (VIN):2FALP74W4SX. Ford Crown Victoria 1995 problem was reported in PANAMA CITY, FL. Vehicle was purchased on Jan 01, 2002. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 8 CYLINDERS. Ford Crown Victoria 1995 drive type:U. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 0 mph. DEALER'S NAME: MR. BILL NORRIS AMERICAN MOTORS . DEALER'S CITY: PANAMA CITY . DEALER'S STATE CODE: FL. Ford Crown Victoria 1995 Air Bags Frontal Driver Side Inflator ModuleFord Crown Victoria 1995 Air Bags Frontal Driver Side Inflator Module Review #10202051 FORD CROWN VICTORIA 1995 car safety problem was reported on Jan 01, 2006.FORD CROWN VICTORIA 1995, manufactured by FORD MOTOR COMPANY had a problem with AIR BAGS:FRONTAL:DRIVER SIDE INFLATOR MODULE . tl*the contact owns a 1995 ford crown victoria. while the vehicle was parked in the carport, the middle of the steering wheel melted from the air bag module inside of the steering wheel. as a result, the air bag is hanging from the steering wheel and there is a strong smell present from the air bag melting the steering wheel. the contact received a recall notice for the cruise control, however, the dealer and manufacturer stated that there were no recalls for this defect. the vehicle has not been repaired. the nhtsa campaign id number and powertrain were unknown. the failure and current mileages were 147,000. .Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Mileage was 147000 miles. Vehicle Identification Number (VIN):2FALP74W4SX. Ford Crown Victoria 1995 problem was reported in PANAMA CITY, FL. Vehicle was purchased on Jan 01, 2002. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 8 CYLINDERS. Ford Crown Victoria 1995 drive type:U. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 0 mph. DEALER'S NAME: MR. BILL NORRIS AMERICAN MOTORS . DEALER'S CITY: PANAMA CITY . DEALER'S STATE CODE: FL. Ford Crown Victoria 1995 Service Brakes, Hydraulic Foundation Components Hoses, Lines/piping, And FittingsFORD CROWN VICTORIA 1995 car safety problem was reported on Mar 22, 2007.FORD CROWN VICTORIA 1995, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS . ford crown victoria rusted oil pan and brake failure. customer states the brakes failed while backing out of a parking space. the oil pan rusted and was removed and replaced on a maintenance service. *kb updated 12/12/07 *bf when the brakes failed, fluid was dripping from under the left/center body. the dealer informed the consumer the brake line was enclosed in the frame channel and the body would have to be lifted in order to make the repair. *jb updated 12/12/07 *tr.0 person(s) were injured. 0 person(s) died.Mileage was 93402 miles. Vehicle Identification Number (VIN):2FALP73W2SX. Ford Crown Victoria 1995 problem was reported in LIVONIA, MI. Original Owner. Vehicle was purchased on Jan 01, 1995. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Vehicle had 8 CYLINDERS. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. DEALER'S NAME: STAN'S AUTO SERVICE . DEALER'S TELEPHONE NUMBER: 313-592-8328 . DEALER'S CITY: REDFORD . DEALER'S STATE CODE: MI. DEALER'S ZIPCODE: 48240 . Ford Crown Victoria 1995 Engine And Engine Cooling EngineFord Crown Victoria 1995 Engine And Engine Cooling Engine Review #10203839 FORD CROWN VICTORIA 1995 car safety problem was reported on Mar 22, 2007.FORD CROWN VICTORIA 1995, manufactured by FORD MOTOR COMPANY had a problem with ENGINE AND ENGINE COOLING:ENGINE . ford crown victoria rusted oil pan and brake failure. customer states the brakes failed while backing out of a parking space. the oil pan rusted and was removed and replaced on a maintenance service. *kb updated 12/12/07 *bf when the brakes failed, fluid was dripping from under the left/center body. the dealer informed the consumer the brake line was enclosed in the frame channel and the body would have to be lifted in order to make the repair. *jb updated 12/12/07 *tr.0 person(s) were injured. 0 person(s) died.Mileage was 93402 miles. Vehicle Identification Number (VIN):2FALP73W2SX. Ford Crown Victoria 1995 problem was reported in LIVONIA, MI. Original Owner. Vehicle was purchased on Jan 01, 1995. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Vehicle had 8 CYLINDERS. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. DEALER'S NAME: STAN'S AUTO SERVICE . DEALER'S TELEPHONE NUMBER: 313-592-8328 . DEALER'S CITY: REDFORD . DEALER'S STATE CODE: MI. DEALER'S ZIPCODE: 48240 . Ford Crown Victoria 1995 Suspension Front Control Arm Lower Ball JointFord Crown Victoria 1995 Suspension Front Control Arm Lower Ball Joint Review #10206353 FORD CROWN VICTORIA 1995 car safety problem was reported on Aug 27, 2007.FORD CROWN VICTORIA 1995, manufactured by FORD MOTOR COMPANY had a problem with SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT . tl*the contact owns a 1995 ford crown victoria. the vehicle was a fleet. while driving between 5-10 mph, the front end of the vehicle dropped. the vehicle was towed to the dealer and they stated that the driver side lower ball joint separated. the manufacturer stated that the vin was not included in nhtsa campaign id number 98v322000 (suspension:front:control arm:lower ball joint). the purchase date was unknown. the failure mileage was 140,931 and current mileage was 141,000. updated 11/15/07 *tr.0 person(s) were injured. 0 person(s) died.Mileage was 140931 miles. Vehicle Identification Number (VIN):2FALP73W7SX. Ford Crown Victoria 1995 problem was reported in BAKERS FIELD, CA. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 8 CYLINDERS. Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 5 mph. DEALER'S NAME: JIM BURKE FORD . DEALER'S TELEPHONE NUMBER: 661-328-3711 . DEALER'S CITY: BAKERSFIELD . DEALER'S STATE CODE: CA. DEALER'S ZIPCODE: 93301 . Ford Crown Victoria 1995 Exterior Lighting Headlights SwitchFord Crown Victoria 1995 Exterior Lighting Headlights Switch Review #10206381 FORD CROWN VICTORIA 1995 car safety problem was reported on Sept 28, 2007.FORD CROWN VICTORIA 1995, manufactured by FORD MOTOR COMPANY had a problem with EXTERIOR LIGHTING:HEADLIGHTS:SWITCH . headlight switch overheats and causes a temporary failure of entire vehicle lighting system. this is a documented problem which has happened to others and needs to be recalled. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 47000 miles. Vehicle Identification Number (VIN):2FALP74W5SX. Ford Crown Victoria 1995 problem was reported in RALEIGH, NC. Vehicle was purchased on Sept 27, 1999. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 8 CYLINDERS. Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 70 mph. DEALER'S NAME: CROSSROADS FORD . DEALER'S CITY: CARY . DEALER'S STATE CODE: NC. Ford Crown Victoria 1995 Vehicle Speed ControlFord Crown Victoria 1995 Vehicle Speed Control Review #10207474 FORD CROWN VICTORIA 1995 car safety problem was reported on July 31, 2007.FORD CROWN VICTORIA 1995, manufactured by FORD MOTOR COMPANY had a problem with VEHICLE SPEED CONTROL . july 2006 my crown victoria caught on fire due to a brake switch and cruise control wiring problem i notified ford motor company to see if there was any recall or problem with such happenings they told me no. august 2007- i received a recall notice for my crown victoria that this problem does exist= i almost lost my car to this fire i had it repaired at my mechanic in july they same day the fire happened i had it flatbedded to his garage. in september 2007- i brought the recall letter and the bill to mantilla ford to see about a reimbursement for this problem just like the recall letter told me to do with all the appropriate bills etc. i was told by the service department at mantilla that they would give it to their regional manager and he will call me.. on october 26, 2007 i called mantilla because i heard nothing they said he would call me today well now october 30, 2007 i have heard nothing at all. i only want this problem resolved and reimbursement for a repair per the recall which i think i am entitled to. but i am having no satisfaction at all--can you help me don't understand why this problem happened to me in july and then in august i get a recall for the problem i just went through which was scary and costly i hope this is the right place to complain if not pls contact me or email me either way. *tr.Vehicle was on fire. Mileage was 125 miles. Vehicle Identification Number (VIN):2FALP71W6SX. Ford Crown Victoria 1995 problem was reported in WEST HAVEN, CT. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 8 CYLINDERS. Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 0 mph. DEALER'S NAME: MANTILLA FORD . DEALER'S TELEPHONE NUMBER: 9312815 . DEALER'S CITY: WEST HAVEN . DEALER'S STATE CODE: CT. DEALER'S ZIPCODE: 06516 . Ford Crown Victoria 1995 Steering Gear Box Shaft PitmanFord Crown Victoria 1995 Steering Gear Box Shaft Pitman Review #10208934 FORD CROWN VICTORIA 1995 car safety problem was reported on Nov 05, 2007.FORD CROWN VICTORIA 1995, manufactured by FORD MOTOR COMPANY had a problem with STEERING:GEAR BOX:SHAFT PITMAN . front driver ball joint design designed for failure, under normal use lower ball joint rapidly deteriorates and causes an unsafe environment for vehicle. steering becomes erratic and steering wheel feels loose. *tr.1 person(s) were injured. 0 person(s) died.Ford Crown Victoria 1995 problem was reported in RALEIGH, NC. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. DEALER'S NAME: GALPIN FORD . Ford Crown Victoria 1995 Suspension Front Control Arm Lower Ball JointFord Crown Victoria 1995 Suspension Front Control Arm Lower Ball Joint Review #10208934 FORD CROWN VICTORIA 1995 car safety problem was reported on Nov 05, 2007.FORD CROWN VICTORIA 1995, manufactured by FORD MOTOR COMPANY had a problem with SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT . front driver ball joint design designed for failure, under normal use lower ball joint rapidly deteriorates and causes an unsafe environment for vehicle. steering becomes erratic and steering wheel feels loose. *tr.1 person(s) were injured. 0 person(s) died.Ford Crown Victoria 1995 problem was reported in RALEIGH, NC. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. DEALER'S NAME: GALPIN FORD . Ford Crown Victoria 1995 Vehicle Speed ControlFord Crown Victoria 1995 Vehicle Speed Control Review #10216654 FORD CROWN VICTORIA 1995 car safety problem was reported on Aug 15, 2007.FORD CROWN VICTORIA 1995, manufactured by FORD MOTOR COMPANY had a problem with VEHICLE SPEED CONTROL . tl*the contact owns a 1995 ford crown victoria. in august of 2007, the contact received a recall notice for the vehicle speed control. since that time, she has been informed every month thereafter that the parts would be available the following month. in january of 2008, she was informed that the parts would be available in february. there had been no failure to date. the purchase date, recall number, and powertrain were unknown. the current mileage was 163,000. updated 02-19-08 *bf updated 02/19/08 *tr.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FALP73W1SX. Ford Crown Victoria 1995 problem was reported in VANCEBURG, KY. Original Owner. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 8 CYLINDERS. Ford Crown Victoria 1995 drive type:U. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 0 mph. DEALER'S NAME: COLE FORD . DEALER'S TELEPHONE NUMBER: 800-507-2653 . DEALER'S CITY: WINCHESTER . DEALER'S STATE CODE: KY. DEALER'S ZIPCODE: 40391 . Ford Crown Victoria 1995 Service Brakes, HydraulicFord Crown Victoria 1995 Service Brakes, Hydraulic Review #10237322 FORD CROWN VICTORIA 1995 car safety problem was reported on July 24, 2008.FORD CROWN VICTORIA 1995, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC . tl*the contact owns a 1995 ford crown victoria. while pulling out of the driveway at an unknown speed, the brake line exploded. the manufacturer stated that his vin was not included in nhtsa campaign id number 98i001000 (service brakes, hydraulic:foundation components:hoses, lines/piping, and fittings). the vehicle has not been repaired. the failure and current mileages were 125,000..0 person(s) were injured. 0 person(s) died.Mileage was 125000 miles. Vehicle Identification Number (VIN):2FALP74W7SX. Ford Crown Victoria 1995 problem was reported in SOUTH GATE KENTUCKY, KY. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 SuspensionFord Crown Victoria 1995 Suspension Review #10246970 FORD CROWN VICTORIA 1995 car safety problem was reported on Oct 11, 2008.FORD CROWN VICTORIA 1995, manufactured by FORD MOTOR COMPANY had a problem with SUSPENSION . tl*the contact owns a 1995 ford crown victoria. the contact was experiencing steering failure. he stated that the ball joints were loose on the vehicle and should be tighter. the vin was excluded from nhtsa campaign id number 96v135000 (steering:linkages). the failure and current mileages were less than 140,000. .0 person(s) were injured. 0 person(s) died.Mileage was 140000 miles. Vehicle Identification Number (VIN):2FALP74W2SX. Ford Crown Victoria 1995 problem was reported in KEMP, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph. Ford Crown Victoria 1995 Service Brakes, HydraulicFord Crown Victoria 1995 Service Brakes, Hydraulic Review #10253079 FORD CROWN VICTORIA 1995 car safety problem was reported on Dec 26, 2008.FORD CROWN VICTORIA 1995, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC . first related symptom: few years ago brake lines rusted under the hood. original remedy: i have painted them to protect them from further rust. current issue: 12/26/2008 brake light switched on during drive to work. 12/26/2008 brake pedal got soft on the way back to home. 12/27/2008 i have checked the brake fluid. it was low. i have bought and add more fluid (car was not moved this day). while fluid was added i started the engine and in park gear i have pumped the brake pedal. it remained soft. fluid got low again... there was a fluid on the pavement between rear axle and the fuel tank in the middle of the car. speed of break deterioration and speed at which car is loosing fluid might lead to an accident. this is definitely a safety issue. vehicle: crown victoria 1995, with abs and traction assist. break lines have corroded several years ago, now first has developed large leak. i will have to repair the car in the next few days, this is first time i will repair the lines. the vehicle has 130k miles. i have never seen other vehicle with such brake line corrosion. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 130000 miles. Vehicle Identification Number (VIN):2FALP74W6SX. Ford Crown Victoria 1995 problem was reported in COLUMBIA, MD. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph. Ford Crown Victoria 1995 Vehicle Speed Control Cruise ControlFord Crown Victoria 1995 Vehicle Speed Control Cruise Control Review #10346368 FORD CROWN VICTORIA 1995 car safety problem was reported on Mar 13, 2008.FORD CROWN VICTORIA 1995, manufactured by FORD MOTOR COMPANY had a problem with VEHICLE SPEED CONTROL:CRUISE CONTROL . tl*the contact owns a 1995 ford crown victoria. the contact was driving approximately between 60 to 70 mph and engaged the cruise control; however, the cruise control would not operate. the failure occurred after the vehicle was repaired under the nhtsa campaign id number 08v051000, vehicle speed control cruise control. the vehicle was taken to an authorized dealer where they refused to correct the failure. the contact stated that the cruise control was functional before the recall remedy repair was performed on the vehicle. the failure mileage was 51,717. updated 09/28/10 *bf the consumer also stated the air bag light illuminated after the cruise control was inspected. updated 10/01/10.Mileage was 51717 miles. Vehicle Identification Number (VIN):2FALP74W3SX. Ford Crown Victoria 1995 problem was reported in SPRINGFIELD, MA. Original Owner. Vehicle was purchased on Oct 03, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. Ford Crown Victoria 1995 drive type:RWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Ford Crown Victoria 1995 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 60 mph. DEALER'S NAME: FORD OF WESTFIELD . DEALER'S CITY: WESTFIELD . DEALER'S STATE CODE: MA. DEALER'S ZIPCODE: 01085 . Ford Crown Victoria 1995 Suspension FrontFord Crown Victoria 1995 Suspension Front Review #10349772 FORD CROWN VICTORIA 1995 car safety problem was reported on May 24, 2009.FORD CROWN VICTORIA 1995, manufactured by FORD MOTOR COMPANY had a problem with SUSPENSION:FRONT . 1995 crown victoria had a blow out on the expressway at 55 mph at about midnight after picking up our grandson from the airport don't know for sure if ball joint broke first or tire did my husband managed to get the car to the side of the road without hitting any thing. this happened may 24th 2009 the other ball joint just broke today august 16 2010 car was going about 5mph when it happened today. what are the odds this was just a coincidences or this was a defect in manufacturing someone could have been killed. we were lucky. *tr.Mileage was 94000 miles. Vehicle Identification Number (VIN):2FALP73WXSX. Ford Crown Victoria 1995 problem was reported in LOUISVILLE, KY. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 55 mph. Ford Crown Victoria 1995 Service Brakes, HydraulicFord Crown Victoria 1995 Service Brakes, Hydraulic Review #10369440 FORD CROWN VICTORIA 1995 car safety problem was reported on Sept 01, 2010.FORD CROWN VICTORIA 1995, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC . tl*the contact owns a 1995 ford crown victoria. the contact stated that while driving 25 mph and attempting to decelerate, the brakes failed. the vehicle was put into neutral in order to stop the vehicle. the failure occurred on an intermittent basis. the vehicle was inspected by a dealer who informed the contact that the brake line was corroded. the brake line was repaired. the failure mileage was approximately 118,000..Mileage was 118000 miles. Vehicle Identification Number (VIN):2FALP74W9SX. Ford Crown Victoria 1995 problem was reported in VILLAS, NJ. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 25 mph. Ford Crown Victoria 1995 Suspension FrontFord Crown Victoria 1995 Suspension Front Review #10395970 FORD CROWN VICTORIA 1995 car safety problem was reported on Apr 11, 2011.FORD CROWN VICTORIA 1995, manufactured by FORD MOTOR COMPANY had a problem with SUSPENSION:FRONT . i have a 1995 ford crown victoria with 83,000 miles on it. the control arm dropped and hit the road, causing loss of steering. lucky for us we were going slow turning into a place of business, if we were going fast it could have been bad news. this car started a squeak on the front a little while ago, i guess it had something to do with it. i have noticed alot of 90's and some 2000's model fords have this same squeak. i contacted ford, and they said there was no recall on my model, i told them there should be. *tr.Mileage was 83000 miles. Vehicle Identification Number (VIN):2FALP73W9SX. Ford Crown Victoria 1995 problem was reported in CLANTON, AL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. VEHICLE SPEED: 2 mph. Ford Crown Victoria 1995 Suspension Review #10437698 FORD CROWN VICTORIA 1995 car safety problem was reported on Nov 23, 2011.FORD CROWN VICTORIA 1995, manufactured by FORD MOTOR COMPANY had a problem with SUSPENSION . tl* the contact owns a 1995 ford crown victoria. the contact stated that while driving approximately 5 mph, the driver side front fell to the ground and the tire buckled inward. the vehicle was towed to an independent mechanic where they advised him that the ball joint had come out from the socket and needed to be replaced. the vehicle was repaired. the manufacturer was contacted and they offered no assistance. the failure mileage was approximately 93,000. .Mileage was 93000 miles. Vehicle Identification Number (VIN):2FALP73W0SX. Ford Crown Victoria 1995 problem was reported in RIVERVIEW, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 5 mph. Ford Crown Victoria 1995 Suspension Review #10524308 FORD CROWN VICTORIA 1995 car safety problem was reported on July 10, 2013.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with SUSPENSION . tl* the contact owns a 1995 ford crown victoria. the contact stated that while exiting a residential drive way, the driver's side front suspension ball joint fractured and separated from the vehicle. the manufacturer advised the contact that the vehicle was not included in nhtsa campaign id number: 98v322000 (suspension). the vehicle was not repaired. the failure and current mileage was 192,000..0 person(s) were injured. 0 person(s) died.Mileage was 192000 miles. Vehicle Identification Number (VIN):2FALP73W2SX. Ford Crown Victoria 1995 problem was reported in MEDINA, OH. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1995 Vehicle Speed ControlFord Crown Victoria 1995 Vehicle Speed Control Review #10538537 FORD CROWN VICTORIA 1995 car safety problem was reported on Aug 31, 2013.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with VEHICLE SPEED CONTROL . tl* the contact owns a 1995 ford crown victoria. the contact stated that while driving 65 mph with the cruise control activated, the cruise control failed. in addition, the horn failed. the vehicle was not repaired or diagnosed. the manufacturer was notified of the incident. the vehicle was previously repaired under nhtsa campaign number: 08v051000 (vehicle speed control). the vehicle was not further repaired. the approximate failure mileage was 215,000. .0 person(s) were injured. 0 person(s) died.Mileage was 215000 miles. Vehicle Identification Number (VIN):2FALP74W3SX. Ford Crown Victoria 1995 problem was reported in WHITE HALL, AR. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 65 mph. Ford Crown Victoria 1995 Electrical SystemFord Crown Victoria 1995 Electrical System Review #10538537 FORD CROWN VICTORIA 1995 car safety problem was reported on Aug 31, 2013.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with ELECTRICAL SYSTEM . tl* the contact owns a 1995 ford crown victoria. the contact stated that while driving 65 mph with the cruise control activated, the cruise control failed. in addition, the horn failed. the vehicle was not repaired or diagnosed. the manufacturer was notified of the incident. the vehicle was previously repaired under nhtsa campaign number: 08v051000 (vehicle speed control). the vehicle was not further repaired. the approximate failure mileage was 215,000. .0 person(s) were injured. 0 person(s) died.Mileage was 215000 miles. Vehicle Identification Number (VIN):2FALP74W3SX. Ford Crown Victoria 1995 problem was reported in WHITE HALL, AR. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 65 mph. Ford Crown Victoria 1995 Vehicle Speed ControlFord Crown Victoria 1995 Vehicle Speed Control Review #10542067 FORD CROWN VICTORIA 1995 car safety problem was reported on Sept 02, 2013.FORD CROWN VICTORIA 1995, manufactured by Ford Motor Company had a problem with VEHICLE SPEED CONTROL . tl* the contact owns a 1995 ford crown victoria. the contact stated that while driving 45 mph, the vehicle suddenly accelerated to 85 mph. the contact applied the brakes but the vehicle did not respond. the contact had to shut the vehicle off while in drive in order to stop the vehicle. the contact referenced nhtsa campaign i.d. number 08v051000 (vehicle speed control) and called the dealer, who stated that the vin was not included in the recall. the contact did not have a diagnostic test performed on the vehicle. the failure mileage was 181,000. .0 person(s) were injured. 0 person(s) died.Mileage was 181000 miles. Vehicle Identification Number (VIN):2FALP73W2SX. Ford Crown Victoria 1995 problem was reported in HARVEY, IL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 45 mph. |
-
Ford Crown Victoria 1995 Forum
Discuss and Report Ford Crown Victoria Problems -
Service Bulletins
View Recent Ford Crown Victoria 1995 repair guidance -
Recalls
Latest recall and safety Ford Crown Victoria 1995 information
Ford Crown Victoria 1995 Systems
Search 1000s of Car Reviews, Recalls and Technical Bulletins
Start by entering a car model, system, manufacturer or any combination of keywords.
Ford Crown Victoria 1995 Reports
my 95 ford exploere engine surges when turn my air conditioner on Ihave a 1994 ford probe which has started to idle very low and stalls at times. It is a 4 cyl. w/ air and a 5 speed. any ideas? I replaced the fuel filter, air flow meter and added HEAT to gas tank to dry and clean fuel system. I think my pcv valv should a standard transmission truck start when it is in gear without the clucth engaged? should a 2005 standard transmission ford ranger start when in gear without the clutch engaged? 96 Ford F250 Emergency brake lever gets caught on the auto adjustment spring, causing brakes to be permanently engaged, also allowing the parking break lever to rub against the hub, which can cut through over time. try pushing the pedals button closer to you. you must have the pedal adjustment button to the left of the radio, looks like a foot, that brings the pedals more inward towards the driver. hope it helped. or look carefully if a wire has corroded. it i would check ur multi switch on ur stearing colum on the pedal whats the sound Just bought an '06 E-350 van. Left d'ship got on highway and noticed shimmy when I got to 60....same problem???? that happened to me last night! If you rock the car back and for while shifting then it should release the safety lock! why does it take turning off the veh. while pulling in on the shifter arm, them starting it again while still holding it inwards ever so slightly??