Car-and-Safety.com
Ford Crown Victoria 1991 Safety Reports and Reviews
Ford Crown Victoria 1991 Reviews
Ford Crown Victoria 1991 Parking Brake ConventionalFord Crown Victoria 1991 Parking Brake Conventional Review #958800 FORD CROWN VICTORIA 1991 car safety problem was reported on Jan 01, 1991.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with PARKING BRAKE:CONVENTIONAL . emergency brake pops often, pops off. tt.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FACP74F4MX. Ford Crown Victoria 1991 problem was reported in CLARKSVILLE, TN. Vehicle was not using Cruise Control. Ford Crown Victoria 1991 Air Bags FrontalFord Crown Victoria 1991 Air Bags Frontal Review #959316 FORD CROWN VICTORIA 1991 car safety problem was reported on Dec 19, 1994.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with AIR BAGS:FRONTAL . air bag deployed, and caused acute bronchitis. tt.Vehicle was involved in a crash. 1 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FACP74F3MX. Ford Crown Victoria 1991 problem was reported in PAWLEE CITY, 00. Vehicle was not using Cruise Control. Ford Crown Victoria 1991 Service Brakes, Hydraulic Foundation Components DiscFord Crown Victoria 1991 Service Brakes, Hydraulic Foundation Components Disc Review #478349 FORD CROWN VICTORIA 1991 car safety problem was reported on Dec 22, 1994.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC . front brakes fail to lock, causing extended stopping distance/skidding. *skd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FACP72G1MX. Ford Crown Victoria 1991 problem was reported in HILLSDALE, NJ. Vehicle was not using Cruise Control. Ford Crown Victoria 1991 Air Bags FrontalFord Crown Victoria 1991 Air Bags Frontal Review #960508 FORD CROWN VICTORIA 1991 car safety problem was reported on .FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with AIR BAGS:FRONTAL . while driving, airbag light blinks on and off all the time, dealer can't correct problem. tt.0 person(s) were injured. 0 person(s) died.Ford Crown Victoria 1991 problem was reported in CUSHING, OK. Vehicle was not using Cruise Control. Ford Crown Victoria 1991 Fuel System, Gasoline Delivery Hoses, Lines/piping, And FittingsFORD CROWN VICTORIA 1991 car safety problem was reported on Apr 30, 1995.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS . inertia switch activated on its own three times without accident involvement; lost all vehicle power; various speeds. tt.0 person(s) were injured. 0 person(s) died.Ford Crown Victoria 1991 problem was reported in BROOKFIELD, WI. Vehicle was not using Cruise Control. Ford Crown Victoria 1991 Service Brakes, Hydraulic Foundation ComponentsFord Crown Victoria 1991 Service Brakes, Hydraulic Foundation Components Review #969967 FORD CROWN VICTORIA 1991 car safety problem was reported on Aug 01, 1995.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS . abs: brake pedal has feeling of rubbing steel on steel; pedal seems to act normal; booster spurting brake fluid too quickly. tt.Ford Crown Victoria 1991 problem was reported in CHICAGO, IL. Vehicle was not using Cruise Control. Ford Crown Victoria 1991 Fuel System, Gasoline DeliveryFord Crown Victoria 1991 Fuel System, Gasoline Delivery Review #970351 FORD CROWN VICTORIA 1991 car safety problem was reported on Aug 10, 1995.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with FUEL SYSTEM, GASOLINE:DELIVERY . fuel system failure, fuel to engine will stop, causing the vehicle to stop completely. tt.0 person(s) were injured. 0 person(s) died.Ford Crown Victoria 1991 problem was reported in BROOKFIELD, WI. Vehicle was not using Cruise Control. Ford Crown Victoria 1991 Fuel System, Gasoline Delivery Review #974470 FORD CROWN VICTORIA 1991 car safety problem was reported on Sept 01, 1995.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with FUEL SYSTEM, GASOLINE:DELIVERY . fuel feeder cuts off while driving cause loss of power. tt.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FACP74F0MX. Ford Crown Victoria 1991 problem was reported in BROOKFIELD, WI. Vehicle was not using Cruise Control. Ford Crown Victoria 1991 Air Bags FrontalFord Crown Victoria 1991 Air Bags Frontal Review #976545 FORD CROWN VICTORIA 1991 car safety problem was reported on June 15, 1995.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with AIR BAGS:FRONTAL . poor performance of the air bag unit light is flashing on the air bag. tt.0 person(s) were injured. 0 person(s) died.Ford Crown Victoria 1991 problem was reported in RICHMOND, MO. Vehicle was not using Cruise Control. Ford Crown Victoria 1991 Vehicle Speed ControlFord Crown Victoria 1991 Vehicle Speed Control Review #979912 FORD CROWN VICTORIA 1991 car safety problem was reported on .FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with VEHICLE SPEED CONTROL . the owner started the car and put it into drive the race forward with out the driver putting her foot on the gas pedal. *ak.Vehicle was involved in a crash. 0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FACP74F9MX. Ford Crown Victoria 1991 problem was reported in KIRBYVILLE, TX. Vehicle was not using Cruise Control. Ford Crown Victoria 1991 Vehicle Speed Control Review #979912 FORD CROWN VICTORIA 1991 car safety problem was reported on .FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with VEHICLE SPEED CONTROL . the owner started the car and put it into drive the race forward with out the driver putting her foot on the gas pedal. *ak.Vehicle was involved in a crash. 0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FACP74F9MX. Ford Crown Victoria 1991 problem was reported in KIRBYVILLE, TX. Vehicle was not using Cruise Control. Ford Crown Victoria 1991 Engine And Engine Cooling Engine GasolineFord Crown Victoria 1991 Engine And Engine Cooling Engine Gasoline Review #490821 FORD CROWN VICTORIA 1991 car safety problem was reported on Apr 01, 1995.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with ENGINE AND ENGINE COOLING:ENGINE:GASOLINE . engine intermittently races when in park or neutral after being driven for short distance, then parked for short period of time. *dsh.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FACP74F5MX. Ford Crown Victoria 1991 problem was reported in FAIRPORT, NY. Vehicle was not using Cruise Control. Ford Crown Victoria 1991 Steering Hydraulic Power Assist SystemFord Crown Victoria 1991 Steering Hydraulic Power Assist System Review #982870 FORD CROWN VICTORIA 1991 car safety problem was reported on Feb 01, 1996.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with STEERING:HYDRAULIC POWER ASSIST SYSTEM . driving vehicle at speed 3 mph, steering broke off, and no control over vehicle, to stop by hitting brakes. *ak.0 person(s) were injured. 0 person(s) died.Ford Crown Victoria 1991 problem was reported in DORCHESTER, MA. Vehicle was not using Cruise Control. Ford Crown Victoria 1991 Engine And Engine Cooling Engine GasolineFord Crown Victoria 1991 Engine And Engine Cooling Engine Gasoline Review #501791 FORD CROWN VICTORIA 1991 car safety problem was reported on Feb 20, 1996.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with ENGINE AND ENGINE COOLING:ENGINE:GASOLINE . engine compartment fire. *sd.Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FACP74F8MX. Ford Crown Victoria 1991 problem was reported in DENTON, NC. Vehicle was not using Cruise Control. Ford Crown Victoria 1991 Structure Body DoorFord Crown Victoria 1991 Structure Body Door Review #503066 FORD CROWN VICTORIA 1991 car safety problem was reported on Apr 03, 1996.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with STRUCTURE:BODY:DOOR . door bottom design to stick out, causing injury. *sd.1 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FACP73F9MX. Ford Crown Victoria 1991 problem was reported in PINCKNEYVI, IL. Vehicle was not using Cruise Control. Ford Crown Victoria 1991 Power Train Automatic TransmissionFord Crown Victoria 1991 Power Train Automatic Transmission Review #503730 FORD CROWN VICTORIA 1991 car safety problem was reported on Jan 01, 1996.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . transmission overdrive failed. *dsh.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FACP74F2MX. Ford Crown Victoria 1991 problem was reported in WEST PALM, FL. Vehicle was not using Cruise Control. Ford Crown Victoria 1991 Electrical System Ignition SwitchFord Crown Victoria 1991 Electrical System Ignition Switch Review #984466 FORD CROWN VICTORIA 1991 car safety problem was reported on .FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM:IGNITION:SWITCH . open circuit to ignition switch resulted in vehicle having erratical start until inoperative and burnt wires of other components. please describe details. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FACP74F8MX. Ford Crown Victoria 1991 problem was reported in ENOLA, PA. Vehicle was not using Cruise Control. Ford Crown Victoria 1991 Equipment Electrical Air ConditionerFord Crown Victoria 1991 Equipment Electrical Air Conditioner Review #504207 FORD CROWN VICTORIA 1991 car safety problem was reported on Aug 04, 1994.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with EQUIPMENT:ELECTRICAL:AIR CONDITIONER . air conditioner o-ring replaced due to leak. *sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FACP73F7MX. Ford Crown Victoria 1991 problem was reported in POWHATAN, VA. Vehicle was not using Cruise Control. Ford Crown Victoria 1991 Air BagsFord Crown Victoria 1991 Air Bags Review #504207 FORD CROWN VICTORIA 1991 car safety problem was reported on Feb 20, 1995.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with AIR BAGS . air bag warning light illuminated due to sensors. *sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FACP73F7MX. Ford Crown Victoria 1991 problem was reported in POWHATAN, VA. Vehicle was not using Cruise Control. Ford Crown Victoria 1991 Engine And Engine Cooling Exhaust System Emission Control Gas Recirculation Valve (egr Valve)FORD CROWN VICTORIA 1991 car safety problem was reported on Jan 26, 1996.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:GAS RECIRCULATION VALVE (EGR VALVE) . egr valve replaced due to malfunction. *sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FACP73F7MX. Ford Crown Victoria 1991 problem was reported in POWHATAN, VA. Vehicle was not using Cruise Control. Ford Crown Victoria 1991 Exterior Lighting Turn Signal SwitchFord Crown Victoria 1991 Exterior Lighting Turn Signal Switch Review #504207 FORD CROWN VICTORIA 1991 car safety problem was reported on Oct 11, 1993.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with EXTERIOR LIGHTING:TURN SIGNAL:SWITCH . multifunction switch inoperative. *sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FACP73F7MX. Ford Crown Victoria 1991 problem was reported in POWHATAN, VA. Vehicle was not using Cruise Control. Ford Crown Victoria 1991 Steering Hydraulic Power Assist SystemFord Crown Victoria 1991 Steering Hydraulic Power Assist System Review #504207 FORD CROWN VICTORIA 1991 car safety problem was reported on May 10, 1993.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with STEERING:HYDRAULIC POWER ASSIST SYSTEM . power steering failed. *sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FACP73F7MX. Ford Crown Victoria 1991 problem was reported in POWHATAN, VA. Vehicle was not using Cruise Control. Ford Crown Victoria 1991 Structure Body DoorFord Crown Victoria 1991 Structure Body Door Review #504207 FORD CROWN VICTORIA 1991 car safety problem was reported on Apr 01, 1993.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with STRUCTURE:BODY:DOOR . right front power door lock inoperative. *sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FACP73F7MX. Ford Crown Victoria 1991 problem was reported in POWHATAN, VA. Vehicle was not using Cruise Control. Ford Crown Victoria 1991 Electrical System Ignition SwitchFord Crown Victoria 1991 Electrical System Ignition Switch Review #504207 FORD CROWN VICTORIA 1991 car safety problem was reported on Apr 22, 1996.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM:IGNITION:SWITCH . ignition switch failed. *sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FACP73F7MX. Ford Crown Victoria 1991 problem was reported in POWHATAN, VA. Vehicle was not using Cruise Control. Ford Crown Victoria 1991 Steering Wheel And Handle BarFord Crown Victoria 1991 Steering Wheel And Handle Bar Review #504207 FORD CROWN VICTORIA 1991 car safety problem was reported on Oct 11, 1993.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with STEERING:WHEEL AND HANDLE BAR . steering column failed. *sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FACP73F7MX. Ford Crown Victoria 1991 problem was reported in POWHATAN, VA. Vehicle was not using Cruise Control. Ford Crown Victoria 1991 Air Bags FrontalFord Crown Victoria 1991 Air Bags Frontal Review #985239 FORD CROWN VICTORIA 1991 car safety problem was reported on May 29, 1996.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with AIR BAGS:FRONTAL . air bag deployed in an accident at 55mph, burned driver's chest. please describe details. *ak.Vehicle was involved in a crash. 1 person(s) were injured. Ford Crown Victoria 1991 problem was reported in ST.CLOUD, MN. Vehicle was not using Cruise Control. Ford Crown Victoria 1991 Electrical System IgnitionFord Crown Victoria 1991 Electrical System Ignition Review #985396 FORD CROWN VICTORIA 1991 car safety problem was reported on .FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM:IGNITION . auto would not start, had it jumped, started then after having it jumped started it begin to smoke from the ignition. *ak.Ford Crown Victoria 1991 problem was reported in LAS VEGAS, NV. Vehicle was not using Cruise Control. Ford Crown Victoria 1991 Vehicle Speed ControlFord Crown Victoria 1991 Vehicle Speed Control Review #985525 FORD CROWN VICTORIA 1991 car safety problem was reported on May 26, 1996.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with VEHICLE SPEED CONTROL . the vehicle was placed in neutral and the vehicle suddenly accelerated. *ak.Vehicle was involved in a crash. 0 person(s) were injured. 0 person(s) died.Ford Crown Victoria 1991 problem was reported in LIVERDALE, OH. Vehicle was not using Cruise Control. Ford Crown Victoria 1991 Air Bags FrontalFord Crown Victoria 1991 Air Bags Frontal Review #985641 FORD CROWN VICTORIA 1991 car safety problem was reported on June 07, 1996.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with AIR BAGS:FRONTAL . when turning on the ignition, the driver's side airbag deployed. please describe. *ak.Vehicle was on fire. Vehicle Identification Number (VIN):2FACP74FXMX. Ford Crown Victoria 1991 problem was reported in LEXINGTON, SC. Vehicle was not using Cruise Control. Ford Crown Victoria 1991 Steering Wheel And Handle BarFord Crown Victoria 1991 Steering Wheel And Handle Bar Review #484716 FORD CROWN VICTORIA 1991 car safety problem was reported on July 01, 1995.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with STEERING:WHEEL AND HANDLE BAR . rubber boot on end of steering shaft detriorated, exposing shaft couplings to road debris, causing rust to form/failure. *sd.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FACP74F8MX. Ford Crown Victoria 1991 problem was reported in ST GEORGE, UT. Vehicle was not using Cruise Control. Ford Crown Victoria 1991 Vehicle Speed ControlFord Crown Victoria 1991 Vehicle Speed Control Review #801083 FORD CROWN VICTORIA 1991 car safety problem was reported on Aug 18, 1996.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with VEHICLE SPEED CONTROL . when driving, the car suddenly accelerates. *ak *slc.Vehicle Identification Number (VIN):2FACP-4FOMX. Ford Crown Victoria 1991 problem was reported in VIRGINIA BEACH, VA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Ford Crown Victoria 1991 drive type:FWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1991 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1991 Seat Belts Front Buckle AssemblyFord Crown Victoria 1991 Seat Belts Front Buckle Assembly Review #801741 FORD CROWN VICTORIA 1991 car safety problem was reported on Aug 29, 1996.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with SEAT BELTS:FRONT:BUCKLE ASSEMBLY . failure of the driver's side seat belt buckle, the consumer was involved in a head-on collision and the driver side seat belt came out of the buckle.*ak.Vehicle was involved in a crash. 1 person(s) were injured. Vehicle Identification Number (VIN):2FACP74F7MX. Ford Crown Victoria 1991 problem was reported in AUGUSTA, GA. Original Owner. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1991 Air BagsFord Crown Victoria 1991 Air Bags Review #503200 FORD CROWN VICTORIA 1991 car safety problem was reported on Apr 01, 1996.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with AIR BAGS . no deployment of airbag during accident.(attorney for client) *sd.Vehicle was involved in a crash. 0 person(s) were injured. 0 person(s) died.Ford Crown Victoria 1991 problem was reported in HOUSTON, TX. Vehicle was not using Cruise Control. Ford Crown Victoria 1991 Electrical System WiringFord Crown Victoria 1991 Electrical System Wiring Review #804739 FORD CROWN VICTORIA 1991 car safety problem was reported on .FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM:WIRING . th elecetrical harness keep blowing a fuse .*ak consumer statesthere is an electricial problem dome lights, cloc, radio no trunk l ight or hood light also cigar light lighter is unhooked, consumer keeps installing fuses but they keep on going out, mechanic stated wires were installed wrong also radio light was burned out. *jb.Vehicle Identification Number (VIN):2FACP74F5MX. Ford Crown Victoria 1991 problem was reported in SAINT CLOUD, MN. Vehicle was purchased on Apr 18, 1992. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1991 drive type:RWD. FUEL TYPE: GAS. Ford Crown Victoria 1991 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1991 Electrical System Ignition SwitchFord Crown Victoria 1991 Electrical System Ignition Switch Review #601982 FORD CROWN VICTORIA 1991 car safety problem was reported on Aug 10, 1996.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM:IGNITION:SWITCH . ignition switch sticks in hot weather..0 person(s) were injured. 0 person(s) died.Ford Crown Victoria 1991 problem was reported in MASPETH, NY. Vehicle was purchased on Nov 15, 1991. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1991 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1991 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1991 Equipment Electrical Air ConditionerFord Crown Victoria 1991 Equipment Electrical Air Conditioner Review #601982 FORD CROWN VICTORIA 1991 car safety problem was reported on Aug 10, 1996.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with EQUIPMENT:ELECTRICAL:AIR CONDITIONER . air conditioner failed 2 times..0 person(s) were injured. 0 person(s) died.Ford Crown Victoria 1991 problem was reported in MASPETH, NY. Vehicle was purchased on Nov 15, 1991. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1991 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1991 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1991 Wheels Cap/cover/hubFord Crown Victoria 1991 Wheels Cap/cover/hub Review #602308 FORD CROWN VICTORIA 1991 car safety problem was reported on Nov 02, 1995.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with WHEELS:CAP/COVER/HUB . hub caps fell off..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FACP74F6MX. Ford Crown Victoria 1991 problem was reported in YULAN, NY. Vehicle was purchased on Nov 02, 1995. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Ford Crown Victoria 1991 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1991 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1991 Vehicle Speed ControlFord Crown Victoria 1991 Vehicle Speed Control Review #511824 FORD CROWN VICTORIA 1991 car safety problem was reported on Nov 09, 1996.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with VEHICLE SPEED CONTROL . sudden acceleration..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FACP74F4MX. Ford Crown Victoria 1991 problem was reported in CLEARWATER, FL. Vehicle was purchased on Jan 01, 1991. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Ford Crown Victoria 1991 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1991 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 45 mph. Ford Crown Victoria 1991 Air Bags Frontal Sensor/control ModuleFord Crown Victoria 1991 Air Bags Frontal Sensor/control Module Review #535718 FORD CROWN VICTORIA 1991 car safety problem was reported on .FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with AIR BAGS:FRONTAL:SENSOR/CONTROL MODULE . air bag sensors failed several times..Vehicle Identification Number (VIN):2FACP79F4MX. Ford Crown Victoria 1991 problem was reported in CORTLAND, NY. Vehicle was using Cruise Control.Ford Crown Victoria 1991 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1991 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1991 WheelsFord Crown Victoria 1991 Wheels Review #535718 FORD CROWN VICTORIA 1991 car safety problem was reported on .FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with WHEELS . wheels corrode and will not hold air..Vehicle Identification Number (VIN):2FACP79F4MX. Ford Crown Victoria 1991 problem was reported in CORTLAND, NY. Vehicle was using Cruise Control.Ford Crown Victoria 1991 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1991 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1991 Power Train Automatic Transmission Park/neutral Start SwitchFord Crown Victoria 1991 Power Train Automatic Transmission Park/neutral Start Switch Review #537364 FORD CROWN VICTORIA 1991 car safety problem was reported on Feb 13, 1998.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION:PARK/NEUTRAL START SWITCH . taxi driver placed transmission in park gear and exited vehicle. upon opening rear door for passenger, vehicle rolled, dragging passenger down the street, causing injury..1 person(s) were injured. Vehicle Identification Number (VIN):2FACP72G2MX. Ford Crown Victoria 1991 problem was reported in SAINT LOUI, MN. Accident was reported to Police. Vehicle was not using Cruise Control. FUEL TYPE: GAS. Ford Crown Victoria 1991 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1991 Vehicle Speed ControlFord Crown Victoria 1991 Vehicle Speed Control Review #700705 FORD CROWN VICTORIA 1991 car safety problem was reported on Nov 18, 1998.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with VEHICLE SPEED CONTROL . i started my car, put it in drive, and the car accelerated at a high rate of speed. the car would not respond to the application of the brake, it wouldn't stop! i hit a parked car. i put the car in re- verse, put the car in park, went to get out of the car and it again accelerated into another parked vehicle. my car couldn't be stopped by applying the brake. can a car go forward while in park? i have never had a problem with my car until this incident. i'm only guessing at the cost of the damage. it could be a lot less. i'm happy there were no pedestrians around at the time!.Vehicle was involved in a crash. 0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FACP74FOMX. Ford Crown Victoria 1991 problem was reported in SAN BRUNO, CA. Vehicle was purchased on Dec 01, 1991. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Ford Crown Victoria 1991 drive type:FWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph. Ford Crown Victoria 1991 Suspension Front Control ArmFord Crown Victoria 1991 Suspension Front Control Arm Review #543463 FORD CROWN VICTORIA 1991 car safety problem was reported on .FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with SUSPENSION:FRONT:CONTROL ARM . ball joints failed, recall notice not recieved..Vehicle Identification Number (VIN):2FACP74F4MX. Ford Crown Victoria 1991 problem was reported in OLYMPIA, WA. Vehicle was purchased on Dec 27, 1998. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1991 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1991 Suspension Front Control Arm Review #543463 FORD CROWN VICTORIA 1991 car safety problem was reported on .FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with SUSPENSION:FRONT:CONTROL ARM . rocker arms failed..Vehicle Identification Number (VIN):2FACP74F4MX. Ford Crown Victoria 1991 problem was reported in OLYMPIA, WA. Vehicle was purchased on Dec 27, 1998. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1991 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1991 Air BagsFord Crown Victoria 1991 Air Bags Review #543463 FORD CROWN VICTORIA 1991 car safety problem was reported on .FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with AIR BAGS . air bag warning lights blink intermittantly..Vehicle Identification Number (VIN):2FACP74F4MX. Ford Crown Victoria 1991 problem was reported in OLYMPIA, WA. Vehicle was purchased on Dec 27, 1998. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1991 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1991 Air Bags Review #834694 FORD CROWN VICTORIA 1991 car safety problem was reported on .FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with AIR BAGS . air bag warning light illuminates, indicating a malfunction within the air bag system. cause unknown. dealer cannot identify the problem. please give any further details. *ak.Ford Crown Victoria 1991 problem was reported in LEESBURG, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1991 Power Train Automatic TransmissionFord Crown Victoria 1991 Power Train Automatic Transmission Review #824922 FORD CROWN VICTORIA 1991 car safety problem was reported on .FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . while exiting vehicle was placed in park, vehicle came out of park and rolled over, injurying passenger. possible cause transmission cam. *ak.Vehicle was involved in a crash. 1 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FACP72G2MX. Ford Crown Victoria 1991 problem was reported in ST. LOUIS PARK, MN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1991 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1991 OtherFord Crown Victoria 1991 Other Review #709739 FORD CROWN VICTORIA 1991 car safety problem was reported on .FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with OTHER . the low fuel warning indicator is on at all times while the engine is running. it doesn't matter how much fuel is in the tank. thank goodness there is a trip odometer in the car as i use that to estimate when to refuel. 200 miles, or once a week, seems to be a reasonable limit. the indicator also comes on, as it should, when the ignition is turned to the 'on' position..Vehicle Identification Number (VIN):2FACP77FXMX. Ford Crown Victoria 1991 problem was reported in NEW HYDE PARK, NY. Vehicle was purchased on Feb 01, 1999. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Ford Crown Victoria 1991 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1991 Seat BeltsFord Crown Victoria 1991 Seat Belts Review #709735 FORD CROWN VICTORIA 1991 car safety problem was reported on .FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with SEAT BELTS . the air bag warning indicator in the instrument panel is flashing constantly. the owners manual makes reference to an indicator that is not on when it should be, or an indicator that is constantly on. in this case, the indicator is flashing in cycles; 9 times in succession , a pause, then 9 times, a pause, etc., etc, etc. this occurs when driving the car..Vehicle Identification Number (VIN):2FACP77FXMX. Ford Crown Victoria 1991 problem was reported in NEW HYDE PARK, NY. Vehicle was purchased on Feb 01, 1999. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Ford Crown Victoria 1991 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1991 Power Train Automatic TransmissionFord Crown Victoria 1991 Power Train Automatic Transmission Review #547554 FORD CROWN VICTORIA 1991 car safety problem was reported on Mar 30, 1999.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . plastic grommet deteriorated causing the over drive to burn out. yh.Ford Crown Victoria 1991 problem was reported in PROSPERITY, SC. Vehicle was not using Cruise Control. Ford Crown Victoria 1991 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1991 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 55 mph. Ford Crown Victoria 1991 Vehicle Speed Control Cruise ControlFord Crown Victoria 1991 Vehicle Speed Control Cruise Control Review #848006 FORD CROWN VICTORIA 1991 car safety problem was reported on .FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with VEHICLE SPEED CONTROL:CRUISE CONTROL . engine surges to 3000 rpms during idling for about 10 seconds, then goes back down. dealer has not seen vehicle. *ak.Ford Crown Victoria 1991 problem was reported in GRANITE CITY, IL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1991 OtherFord Crown Victoria 1991 Other Review #712403 FORD CROWN VICTORIA 1991 car safety problem was reported on Feb 01, 1999.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with OTHER . no summary..Vehicle Identification Number (VIN):2FACP74F4MX. Ford Crown Victoria 1991 problem was reported in ENFIELD, CT. Vehicle was purchased on May 01, 1996. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Ford Crown Victoria 1991 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph. Ford Crown Victoria 1991 Power Train Automatic Transmission Lever And Linkage Column ShiftFORD CROWN VICTORIA 1991 car safety problem was reported on .FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION:LEVER AND LINKAGE:COLUMN SHIFT . when gear indicator is put into drive the gear shift will go all the way down to 1st gear. dealer replaced cable linkage and problem is occurring again. *ak.Ford Crown Victoria 1991 problem was reported in DONNA, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1991 Structure Frame And MembersFord Crown Victoria 1991 Structure Frame And Members Review #713716 FORD CROWN VICTORIA 1991 car safety problem was reported on .FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with STRUCTURE:FRAME AND MEMBERS . the manufacturer, ford motors, admits that the paint on its 1991 crown victoria is defective, but it offers no repair or compensation for the problem. it is a costly repair to have the car properly repainted and i would like ford motors to bear the responsibility..Ford Crown Victoria 1991 problem was reported in ALBERTSON, NY. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Ford Crown Victoria 1991 drive type:FWD. FUEL TYPE: GAS. Ford Crown Victoria 1991 Fuel System, Gasoline Delivery Fuel PumpFord Crown Victoria 1991 Fuel System, Gasoline Delivery Fuel Pump Review #729643 FORD CROWN VICTORIA 1991 car safety problem was reported on .FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP . fluids all ok, fuel pump/filter replaced, distributor, starter, & alt replaced.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FACP74F8MX. Ford Crown Victoria 1991 problem was reported in MT. MORRIS, MI. Vehicle was purchased on June 01, 1999. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Ford Crown Victoria 1991 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. VEHICLE SPEED: 5 mph. Ford Crown Victoria 1991 Electrical SystemFord Crown Victoria 1991 Electrical System Review #729643 FORD CROWN VICTORIA 1991 car safety problem was reported on .FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM . fluids all ok, fuel pump/filter replaced, distributor, starter, & alt replaced.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FACP74F8MX. Ford Crown Victoria 1991 problem was reported in MT. MORRIS, MI. Vehicle was purchased on June 01, 1999. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Ford Crown Victoria 1991 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. VEHICLE SPEED: 5 mph. Ford Crown Victoria 1991 Tires Tread/beltFord Crown Victoria 1991 Tires Tread/belt Review #554581 FORD CROWN VICTORIA 1991 car safety problem was reported on May 21, 2000.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with TIRES:TREAD/BELT . vehicle experienced tread separation on the firestone firehawk tire on the vehicle causing temporary loss of control. *mjs.Vehicle Identification Number (VIN):12610136639. Ford Crown Victoria 1991 problem was reported in FORT WORTH, TX. Vehicle was using Cruise Control.Ford Crown Victoria 1991 drive type:RWD. FUEL TYPE: GAS. Ford Crown Victoria 1991 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 70 mph. Ford Crown Victoria 1991 Electrical System Wiring Front UnderhoodFord Crown Victoria 1991 Electrical System Wiring Front Underhood Review #872380 FORD CROWN VICTORIA 1991 car safety problem was reported on Oct 03, 2000.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM:WIRING:FRONT UNDERHOOD . vehicle was parked in driveway. consumer noticed smoke inside of vehicle, and he got out of the vehicle. fire department wasn't notified, and there were no injuries.*ak.Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FACP74F5MX. Ford Crown Victoria 1991 problem was reported in WEST HAMPTON BEACH, NY. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph. Ford Crown Victoria 1991 Tires Tread/beltFord Crown Victoria 1991 Tires Tread/belt Review #886410 FORD CROWN VICTORIA 1991 car safety problem was reported on Feb 10, 2001.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with TIRES:TREAD/BELT . was traveling 70 mph and had just went over a bridge heard a thumping noise. started to slow down. noticed in rear view mirror that tread had separated from right rear tire and was left on the road. 1991, ford, ltd, p215/70r15 with 53,000 miles. *ak.Vehicle Identification Number (VIN):2FACP74F4MX. Ford Crown Victoria 1991 problem was reported in NAPLES, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 70 mph. Ford Crown Victoria 1991 Engine And Engine Cooling Engine GasolineFord Crown Victoria 1991 Engine And Engine Cooling Engine Gasoline Review #887001 FORD CROWN VICTORIA 1991 car safety problem was reported on .FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with ENGINE AND ENGINE COOLING:ENGINE:GASOLINE . while driving 30-40 mph vehicle completely shutdown without warning, cause unknown. please give any further details. *ak.Ford Crown Victoria 1991 problem was reported in CORPUS CHRISTI, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Crown Victoria 1991 Air BagsFord Crown Victoria 1991 Air Bags Review #753024 FORD CROWN VICTORIA 1991 car safety problem was reported on July 01, 2001.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with AIR BAGS . car has started to stall repeatedly at idle or near idle speeds but not consistantly, otherwise runs fine. airbag light also blinks on and off 9 times stops and re starts blinks consistantly, works?*ak.Vehicle Identification Number (VIN):2FACP74F9MX. Ford Crown Victoria 1991 problem was reported in PITTSBURGH, PA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Ford Crown Victoria 1991 drive type:FWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. VEHICLE SPEED: 60 mph. Ford Crown Victoria 1991 Engine And Engine Cooling Engine GasolineFord Crown Victoria 1991 Engine And Engine Cooling Engine Gasoline Review #753024 FORD CROWN VICTORIA 1991 car safety problem was reported on July 01, 2001.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with ENGINE AND ENGINE COOLING:ENGINE:GASOLINE . car has started to stall repeatedly at idle or near idle speeds but not consistantly, otherwise runs fine. airbag light also blinks on and off 9 times stops and re starts blinks consistantly, works?*ak.Vehicle Identification Number (VIN):2FACP74F9MX. Ford Crown Victoria 1991 problem was reported in PITTSBURGH, PA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Ford Crown Victoria 1991 drive type:FWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. VEHICLE SPEED: 60 mph. Ford Crown Victoria 1991 Electrical SystemFord Crown Victoria 1991 Electrical System Review #8001026 FORD CROWN VICTORIA 1991 car safety problem was reported on Dec 09, 2001.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM . vehicle had not been driven in days, it caught on fire and burned to the ground, cause of fire not determined yet. *ak consumer stated that ford engineer told him that faulty components would cause a fire. *yd.Vehicle was on fire. Vehicle Identification Number (VIN):2FACP74F2MX. Ford Crown Victoria 1991 problem was reported in GOLDEN BEACH, FL. Accident was reported to Police. Original Owner. Vehicle was purchased on Nov 28, 1990. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Ford Crown Victoria 1991 drive type:RWD. FUEL TYPE: GAS. Ford Crown Victoria 1991 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1991 Engine And Engine Cooling Engine GasolineFord Crown Victoria 1991 Engine And Engine Cooling Engine Gasoline Review #8002020 FORD CROWN VICTORIA 1991 car safety problem was reported on Jan 01, 2000.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with ENGINE AND ENGINE COOLING:ENGINE:GASOLINE . when making a turn in either direction vehicle intermittently stalls. dealer has replaced idle sensor, has not remedied the problem.*ak.Vehicle Identification Number (VIN):2FACT74F3MX. Ford Crown Victoria 1991 problem was reported in EDGEWATER, FL. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1991 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1991 Electrical System IgnitionFord Crown Victoria 1991 Electrical System Ignition Review #8003299 FORD CROWN VICTORIA 1991 car safety problem was reported on Dec 05, 2001.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM:IGNITION . while driving around corners or slowing down vehicle would stall, dealer contacted and informed consumer that owners problem was caused by a malfunctioned ignition.*ak *slc.Vehicle Identification Number (VIN):2FACP74F0MX. Ford Crown Victoria 1991 problem was reported in MIAMI, FL. Vehicle was purchased on July 07, 2000. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Crown Victoria 1991 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Crown Victoria 1991 TRANSMISSION TYPE: AUTO. Ford Crown Victoria 1991 Electrical System Alternator/generator/regulatorFord Crown Victoria 1991 Electrical System Alternator/generator/regulator Review #761507 FORD CROWN VICTORIA 1991 car safety problem was reported on May 03, 2002.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM:ALTERNATOR/GENERATOR/REGULATOR . alternator plug shorted out and caused a high potentional overload that caught the alternator on fire. the short did not trip any fuse in vehicle. fire was very intense. the fire quickly spread to adjacent component and melted plug wires, wire harnesses. fire also damaged hood and right front fender. the fire was quickly spreading when help arrived to extinguish the fire. and yet no fuse ever tripped to engine electrical to stop short!.Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):2FACP74F6MX. Ford Crown Victoria 1991 problem was reported in MACON, GA. Vehicle was purchased on Mar 01, 2002. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Ford Crown Victoria 1991 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph. Ford Crown Victoria 1991 Tires Temporary/emergency Spare TireFord Crown Victoria 1991 Tires Temporary/emergency Spare Tire Review #10006165 FORD CROWN VICTORIA 1991 car safety problem was reported on .FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with TIRES:TEMPORARY/EMERGENCY SPARE TIRE . the consumer noticed an indention in the sidewall of the spare tire. the spare tire was damaged on the bracket that holds the jack pole. *scc *jb.Ford Crown Victoria 1991 problem was reported in BELLWOOD, IL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. Ford Crown Victoria 1991 drive type:U. FUEL TYPE: DIESEL. Ford Crown Victoria 1991 Engine And Engine Cooling EngineFord Crown Victoria 1991 Engine And Engine Cooling Engine Review #10046325 FORD CROWN VICTORIA 1991 car safety problem was reported on Oct 01, 2003.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with ENGINE AND ENGINE COOLING:ENGINE . when the vehicle was idling the consumer smelled a heavy scent of oil burning. while driving at 65 mph, the engine began revving at a high rate. also, the transmission gears would not go into third or fourth gear. the vehicle was taken to the dealer, who informed the consumer that the bushing was made of plastic. however, the bushing should be made from metal. the manufacturer had been informed. *ak when the cable linkage was disconnected, the destruction of the clutch would occur. (locking up the higher two gears, without the lock up only the first and second gear would work) *scc *jb .Mileage was 89000 miles. Vehicle Identification Number (VIN):2FACP74F2MX. Ford Crown Victoria 1991 problem was reported in HUNTSVILLE, AL. Original Owner. Vehicle was purchased on Mar 20, 1991. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Vehicle had 8 CYLINDERS. FUEL TYPE: GAS. Ford Crown Victoria 1991 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 65 mph. DEALER'S NAME: JOE SPARTAIN FORD . DEALER'S TELEPHONE NUMBER: 256 350 2120 . DEALER'S CITY: DECATUR . DEALER'S STATE CODE: AL. DEALER'S ZIPCODE: 35603 . Ford Crown Victoria 1991 Power Train Automatic TransmissionFord Crown Victoria 1991 Power Train Automatic Transmission Review #10046325 FORD CROWN VICTORIA 1991 car safety problem was reported on Oct 01, 2003.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . when the vehicle was idling the consumer smelled a heavy scent of oil burning. while driving at 65 mph, the engine began revving at a high rate. also, the transmission gears would not go into third or fourth gear. the vehicle was taken to the dealer, who informed the consumer that the bushing was made of plastic. however, the bushing should be made from metal. the manufacturer had been informed. *ak when the cable linkage was disconnected, the destruction of the clutch would occur. (locking up the higher two gears, without the lock up only the first and second gear would work) *scc *jb .Mileage was 89000 miles. Vehicle Identification Number (VIN):2FACP74F2MX. Ford Crown Victoria 1991 problem was reported in HUNTSVILLE, AL. Original Owner. Vehicle was purchased on Mar 20, 1991. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Vehicle had 8 CYLINDERS. FUEL TYPE: GAS. Ford Crown Victoria 1991 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 65 mph. DEALER'S NAME: JOE SPARTAIN FORD . DEALER'S TELEPHONE NUMBER: 256 350 2120 . DEALER'S CITY: DECATUR . DEALER'S STATE CODE: AL. DEALER'S ZIPCODE: 35603 . Ford Crown Victoria 1991 Vehicle Speed ControlFord Crown Victoria 1991 Vehicle Speed Control Review #10171453 FORD CROWN VICTORIA 1991 car safety problem was reported on Oct 14, 2006.FORD CROWN VICTORIA 1991, manufactured by FORD MOTOR COMPANY had a problem with VEHICLE SPEED CONTROL . dt*: the contact stated while at a stop, the gearshift was shifted into drive and the vehicle accelerated out of control, bounced over a high curb, and was fishtailing. the contact estimated the speed to have reached 70 mph before the ignition was turned off. the vehicle was towed to the service dealer, who determined that the throttle pedal had seized. the manufacturer was notified. updated 12/5/2006 - *nm.0 person(s) were injured. 0 person(s) died.Mileage was 100000 miles. Vehicle Identification Number (VIN):2FACP73F5MX. Ford Crown Victoria 1991 problem was reported in JOLIET, IL. Original Owner. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. Ford Crown Victoria 1991 drive type:RWD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Ford Crown Victoria 1991 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 70 mph. DEALER'S NAME: RON TIRAPELLI FORD . DEALER'S TELEPHONE NUMBER: 815-725-5593 . DEALER'S CITY: SHOREWOOD . DEALER'S STATE CODE: IL. DEALER'S ZIPCODE: 60431 . |
-
Ford Crown Victoria 1991 Forum
Discuss and Report Ford Crown Victoria Problems -
Service Bulletins
View Recent Ford Crown Victoria 1991 repair guidance -
Recalls
Latest recall and safety Ford Crown Victoria 1991 information
Ford Crown Victoria 1991 Systems
Search 1000s of Car Reviews, Recalls and Technical Bulletins
Start by entering a car model, system, manufacturer or any combination of keywords.
Ford Crown Victoria 1991 Reports
my 95 ford exploere engine surges when turn my air conditioner on Ihave a 1994 ford probe which has started to idle very low and stalls at times. It is a 4 cyl. w/ air and a 5 speed. any ideas? I replaced the fuel filter, air flow meter and added HEAT to gas tank to dry and clean fuel system. I think my pcv valv should a standard transmission truck start when it is in gear without the clucth engaged? should a 2005 standard transmission ford ranger start when in gear without the clutch engaged? 96 Ford F250 Emergency brake lever gets caught on the auto adjustment spring, causing brakes to be permanently engaged, also allowing the parking break lever to rub against the hub, which can cut through over time. try pushing the pedals button closer to you. you must have the pedal adjustment button to the left of the radio, looks like a foot, that brings the pedals more inward towards the driver. hope it helped. or look carefully if a wire has corroded. it i would check ur multi switch on ur stearing colum on the pedal whats the sound Just bought an '06 E-350 van. Left d'ship got on highway and noticed shimmy when I got to 60....same problem???? that happened to me last night! If you rock the car back and for while shifting then it should release the safety lock! why does it take turning off the veh. while pulling in on the shifter arm, them starting it again while still holding it inwards ever so slightly??