Car-and-Safety.com

Ford Bronco Ii 1990 Safety Reports and Reviews



Ford Bronco Ii 1990 Reviews



Ford Bronco Ii 1990 Electrical System Alternator/generator/regulator

Ford Bronco Ii 1990 Electrical System Alternator/generator/regulator Review #967175

FORD BRONCO II 1990 car safety problem was reported on June 05, 1995.FORD BRONCO II 1990, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM:ALTERNATOR/GENERATOR/REGULATOR . the alternator caused the truck to catch on fire. please explain. tt.Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FMCU12T3LU. Ford Bronco Ii 1990 problem was reported in FOXWORTH, MS. Vehicle was not using Cruise Control.

Ford Bronco Ii 1990 Suspension Front

Ford Bronco Ii 1990 Suspension Front Review #472037

FORD BRONCO II 1990 car safety problem was reported on June 04, 1994.FORD BRONCO II 1990, manufactured by FORD MOTOR COMPANY had a problem with SUSPENSION:FRONT . vehicle swerved out of control then rolled over, causing injuries/one death. *skd.Vehicle was involved in a crash. 4 person(s) were injured. 1 person(s) died.Ford Bronco Ii 1990 problem was reported in PLANO, TX. Vehicle was not using Cruise Control.

Ford Bronco Ii 1990 Engine And Engine Cooling Engine

Ford Bronco Ii 1990 Engine And Engine Cooling Engine Review #973517

FORD BRONCO II 1990 car safety problem was reported on Sept 28, 1995.FORD BRONCO II 1990, manufactured by FORD MOTOR COMPANY had a problem with ENGINE AND ENGINE COOLING:ENGINE . engine cylinder head has cracked twice. tt three months later the engine failed and was replaced. then the engine cylinder head cracked again. *yh.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FMCU12T0LU. Ford Bronco Ii 1990 problem was reported in QUINTON, VA. Vehicle was not using Cruise Control.

Ford Bronco Ii 1990 Fuel System, Gasoline

Ford Bronco Ii 1990 Fuel System, Gasoline Review #977756

FORD BRONCO II 1990 car safety problem was reported on Jan 06, 1996.FORD BRONCO II 1990, manufactured by FORD MOTOR COMPANY had a problem with FUEL SYSTEM, GASOLINE . consumer was driving the vehicle and the vehicle caught fire. tt.Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Ford Bronco Ii 1990 problem was reported in SEAVIEW, WA. Vehicle was not using Cruise Control.

Ford Bronco Ii 1990 Seat Belts Front Retractor

Ford Bronco Ii 1990 Seat Belts Front Retractor Review #978608

FORD BRONCO II 1990 car safety problem was reported on July 12, 1995.FORD BRONCO II 1990, manufactured by FORD MOTOR COMPANY had a problem with SEAT BELTS:FRONT:RETRACTOR . the drivers side seatbelt will not retract and will not restrain in an accident. please describe. tt.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FMCU12T7L4. Ford Bronco Ii 1990 problem was reported in HAMPSTED, NC. Vehicle was not using Cruise Control.

Ford Bronco Ii 1990 Service Brakes, Hydraulic

Ford Bronco Ii 1990 Service Brakes, Hydraulic Review #800880

FORD BRONCO II 1990 car safety problem was reported on Aug 13, 1996.FORD BRONCO II 1990, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC . friend was driving vehicle, while driving, smelled something burning, tried to applied brakes, wheel well hub area was in flames, brakes failed to work. *ak.Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Ford Bronco Ii 1990 problem was reported in EUREKA, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 35 mph.

Ford Bronco Ii 1990 Service Brakes, Hydraulic Foundation Components

Ford Bronco Ii 1990 Service Brakes, Hydraulic Foundation Components Review #800880

FORD BRONCO II 1990 car safety problem was reported on Aug 13, 1996.FORD BRONCO II 1990, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS . friend was driving vehicle, while driving, smelled something burning, tried to applied brakes, wheel well hub area was in flames, brakes failed to work. *ak.Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Ford Bronco Ii 1990 problem was reported in EUREKA, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 35 mph.

Ford Bronco Ii 1990 Service Brakes, Hydraulic Review #800879

FORD BRONCO II 1990 car safety problem was reported on Aug 13, 1996.FORD BRONCO II 1990, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC . while driving vehicle, smelled something burning, very shortly afterwards had a loss of brake power, the hub area of the wheel was in flames. *ak.Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Ford Bronco Ii 1990 problem was reported in EUREKA, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 30 mph.

Ford Bronco Ii 1990 Service Brakes, Hydraulic Foundation Components Review #800879

FORD BRONCO II 1990 car safety problem was reported on Aug 13, 1996.FORD BRONCO II 1990, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS . while driving vehicle, smelled something burning, very shortly afterwards had a loss of brake power, the hub area of the wheel was in flames. *ak.Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Ford Bronco Ii 1990 problem was reported in EUREKA, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 30 mph.

Ford Bronco Ii 1990 Engine And Engine Cooling Engine

Ford Bronco Ii 1990 Engine And Engine Cooling Engine Review #514573

FORD BRONCO II 1990 car safety problem was reported on Nov 14, 1995.FORD BRONCO II 1990, manufactured by FORD MOTOR COMPANY had a problem with ENGINE AND ENGINE COOLING:ENGINE . engine cylinder head cracked twice, causing leak..0 person(s) died.Vehicle Identification Number (VIN):1FMCU14T1LU. Ford Bronco Ii 1990 problem was reported in SOUTH EUCLID, OH. Vehicle was purchased on Apr 01, 1995. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Bronco Ii 1990 drive type:4WD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Bronco Ii 1990 TRANSMISSION TYPE: AUTO.

Ford Bronco Ii 1990 Seat Belts Front Buckle Assembly

Ford Bronco Ii 1990 Seat Belts Front Buckle Assembly Review #812662

FORD BRONCO II 1990 car safety problem was reported on May 30, 1997.FORD BRONCO II 1990, manufactured by FORD MOTOR COMPANY had a problem with SEAT BELTS:FRONT:BUCKLE ASSEMBLY . the rear driver's side seat belt buckles locked up on a 4-year old. the belt had to be cut off. ford refuses to do anything. *ak.1 person(s) were injured. Vehicle Identification Number (VIN):1FMCU14T5LU. Ford Bronco Ii 1990 problem was reported in NORTH TONAWANDA, NY. Vehicle was purchased on Nov 01, 1996. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Bronco Ii 1990 drive type:4WD. FUEL SYSTEM:N/A. Ford Bronco Ii 1990 TRANSMISSION TYPE: AUTO.

Ford Bronco Ii 1990 Engine And Engine Cooling Engine

Ford Bronco Ii 1990 Engine And Engine Cooling Engine Review #517213

FORD BRONCO II 1990 car safety problem was reported on Apr 10, 1997.FORD BRONCO II 1990, manufactured by FORD MOTOR COMPANY had a problem with ENGINE AND ENGINE COOLING:ENGINE . the head gasket cracked..0 person(s) were injured. 0 person(s) died.Ford Bronco Ii 1990 problem was reported in STAFFORD SPRINGS, CT. Original Owner. Vehicle was not using Cruise Control.

Ford Bronco Ii 1990 Power Train Automatic Transmission

Ford Bronco Ii 1990 Power Train Automatic Transmission Review #521888

FORD BRONCO II 1990 car safety problem was reported on June 19, 1997.FORD BRONCO II 1990, manufactured by FORD MOTOR COMPANY had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . transmission failed while traveling on a five lane highway while in the middle lane..Vehicle Identification Number (VIN):1FMCU14T4LU. Ford Bronco Ii 1990 problem was reported in ALBUQUERQU, NM. Original Owner. Vehicle was purchased on Apr 12, 1990. Vehicle was using Cruise Control.Ford Bronco Ii 1990 drive type:4WD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. VEHICLE SPEED: 50 mph.

Ford Bronco Ii 1990 Suspension Front

Ford Bronco Ii 1990 Suspension Front Review #520338

FORD BRONCO II 1990 car safety problem was reported on May 10, 1995.FORD BRONCO II 1990, manufactured by FORD MOTOR COMPANY had a problem with SUSPENSION:FRONT . driver swerved, vehicle rolled over..0 person(s) died.Vehicle Identification Number (VIN):1FMCU12T7LU. Ford Bronco Ii 1990 problem was reported in MEMPHIS, TN. Accident was reported to Police. Original Owner. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Bronco Ii 1990 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 42 mph.

Ford Bronco Ii 1990 Service Brakes, Electric

Ford Bronco Ii 1990 Service Brakes, Electric Review #824159

FORD BRONCO II 1990 car safety problem was reported on June 01, 1998.FORD BRONCO II 1990, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, ELECTRIC . abs brake problems; when applying the brakes in regular traffic conditions, under normal braking, the pedal fades. the abs warning light is on, and driver is not able to reset. the rear anti-lock brake valve needs to be replaced. *ak consumer states that code 4 shows up pointing to a problem with the electro hydraulic valve. *slc.Vehicle Identification Number (VIN):1FMCU14T6LU. Ford Bronco Ii 1990 problem was reported in MIDDLETOWN, NY. Vehicle was using ANTI-LOCK BRAKES.Vehicle was not using Cruise Control. FUEL TYPE: GAS. Ford Bronco Ii 1990 TRANSMISSION TYPE: MAN . VEHICLE SPEED: 30 mph.

Ford Bronco Ii 1990 Service Brakes, Hydraulic Antilock

Ford Bronco Ii 1990 Service Brakes, Hydraulic Antilock Review #526906

FORD BRONCO II 1990 car safety problem was reported on .FORD BRONCO II 1990, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC:ANTILOCK . right front abs brakes failed. also vehicle caught on fire. sourc eof fire unknown..Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Ford Bronco Ii 1990 problem was reported in VIDOR, TX. Original Owner. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Bronco Ii 1990 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS.

Ford Bronco Ii 1990 Engine And Engine Cooling Engine Gasoline

Ford Bronco Ii 1990 Engine And Engine Cooling Engine Gasoline Review #526906

FORD BRONCO II 1990 car safety problem was reported on .FORD BRONCO II 1990, manufactured by FORD MOTOR COMPANY had a problem with ENGINE AND ENGINE COOLING:ENGINE:GASOLINE . right front abs brakes failed. also vehicle caught on fire. sourc eof fire unknown..Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Ford Bronco Ii 1990 problem was reported in VIDOR, TX. Original Owner. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Bronco Ii 1990 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS.

Ford Bronco Ii 1990 Power Train Automatic Transmission

Ford Bronco Ii 1990 Power Train Automatic Transmission Review #525508

FORD BRONCO II 1990 car safety problem was reported on Sept 13, 1996.FORD BRONCO II 1990, manufactured by FORD MOTOR COMPANY had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . transmission failed, several problems with transmission due to failure..Vehicle Identification Number (VIN):1FMCU12T3LU. Ford Bronco Ii 1990 problem was reported in CASTRO VAL, CA. Vehicle was purchased on Aug 31, 1996. Vehicle was not using Cruise Control.

Ford Bronco Ii 1990 Structure Frame And Members

Ford Bronco Ii 1990 Structure Frame And Members Review #832613

FORD BRONCO II 1990 car safety problem was reported on May 01, 1998.FORD BRONCO II 1990, manufactured by FORD MOTOR COMPANY had a problem with STRUCTURE:FRAME AND MEMBERS . weld in the body is breaking loose. started at the top of the hatch door, went around to left to door post, around the window and windshield, and door rim at top left and right side. dealer is not aware of the problem. problem still exists, allows for water to enter vehicle. *ak.et..Vehicle Identification Number (VIN):2MELM75W2SX. Ford Bronco Ii 1990 problem was reported in LAKE WALES, FL. Original Owner. Vehicle was purchased on Nov 10, 1989. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Bronco Ii 1990 drive type:RWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. Ford Bronco Ii 1990 TRANSMISSION TYPE: AUTO.

Ford Bronco Ii 1990 Engine And Engine Cooling Engine

Ford Bronco Ii 1990 Engine And Engine Cooling Engine Review #517213

FORD BRONCO II 1990 car safety problem was reported on .FORD BRONCO II 1990, manufactured by FORD MOTOR COMPANY had a problem with ENGINE AND ENGINE COOLING:ENGINE . head gasket cracked resulting in failure..Ford Bronco Ii 1990 problem was reported in STAFFORD S, CT. Vehicle was not using Cruise Control.

Ford Bronco Ii 1990 Power Train Manual Transmission

Ford Bronco Ii 1990 Power Train Manual Transmission Review #704378

FORD BRONCO II 1990 car safety problem was reported on Feb 05, 1999.FORD BRONCO II 1990, manufactured by FORD MOTOR COMPANY had a problem with POWER TRAIN:MANUAL TRANSMISSION . rpms increase while gas is being pushed after clutch has already been pushed to change gears. sounds as though the car is trying to increase speed with the clutch pushed in although it is not. air conditioner will occasionally trigger itself on if the car hits a bump or the car jerks while in motion. does not work when not jolted..Ford Bronco Ii 1990 problem was reported in AUSTIN, TX. Vehicle was purchased on June 01, 1998. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Bronco Ii 1990 drive type:FWD. FUEL TYPE: GAS. VEHICLE SPEED: 40 mph.

Ford Bronco Ii 1990 Equipment Electrical Air Conditioner

Ford Bronco Ii 1990 Equipment Electrical Air Conditioner Review #704378

FORD BRONCO II 1990 car safety problem was reported on Feb 05, 1999.FORD BRONCO II 1990, manufactured by FORD MOTOR COMPANY had a problem with EQUIPMENT:ELECTRICAL:AIR CONDITIONER . rpms increase while gas is being pushed after clutch has already been pushed to change gears. sounds as though the car is trying to increase speed with the clutch pushed in although it is not. air conditioner will occasionally trigger itself on if the car hits a bump or the car jerks while in motion. does not work when not jolted..Ford Bronco Ii 1990 problem was reported in AUSTIN, TX. Vehicle was purchased on June 01, 1998. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Bronco Ii 1990 drive type:FWD. FUEL TYPE: GAS. VEHICLE SPEED: 40 mph.

Ford Bronco Ii 1990 Fuel System, Gasoline Storage Tank Assembly

Ford Bronco Ii 1990 Fuel System, Gasoline Storage Tank Assembly Review #712688

FORD BRONCO II 1990 car safety problem was reported on Jan 01, 1999.FORD BRONCO II 1990, manufactured by FORD MOTOR COMPANY had a problem with FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY . ford has discontinued the fuel filler pipe. this pipe has rotted and is leaking and could cause a fire. ford has no suggestions on how to repair..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FMCU12TXLU. Ford Bronco Ii 1990 problem was reported in ELBERTA, AL. Vehicle was purchased on Sept 01, 1998. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Bronco Ii 1990 drive type:RWD. FUEL TYPE: GAS.

Ford Bronco Ii 1990 Fuel System, Gasoline Storage Tank Assembly Review #712688

FORD BRONCO II 1990 car safety problem was reported on Jan 01, 1999.FORD BRONCO II 1990, manufactured by FORD MOTOR COMPANY had a problem with FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY . ford has discontinued the fuel filler pipe. this pipe has rotted and is leaking and could cause a fire. ford has no suggestions on how to repair..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FMCU12TXLU. Ford Bronco Ii 1990 problem was reported in ELBERTA, AL. Vehicle was purchased on Sept 01, 1998. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Bronco Ii 1990 drive type:RWD. FUEL TYPE: GAS.

Ford Bronco Ii 1990 Seats

Ford Bronco Ii 1990 Seats Review #714264

FORD BRONCO II 1990 car safety problem was reported on .FORD BRONCO II 1990, manufactured by FORD MOTOR COMPANY had a problem with SEATS . the driver side seat keeps repeatedly breaking. i am not a large person i do not weigh a lot and i am not rough or clumsy so i do not understand why the seat keeps beaking. i have injured my back and neck on several ocassions because this problem has happened so frequently that i am now hoping that a new seat may fair better. i should not have this problem and it happenes with such regularity that i am certain that there are many other bronco owners that are experiencing the same reocurring problems with their seats. this can bea potentially serious defect in the seat's system. all it takes is for the seat to go off its track, come loose, or snap back while driving and their will be a very serious accident and i am sure this has already occurred..Ford Bronco Ii 1990 problem was reported in BUSHKILL, PA. Vehicle was purchased on June 01, 1997. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Bronco Ii 1990 drive type:4WD. FUEL TYPE: GAS.

Ford Bronco Ii 1990 Visibility Rearview Mirrors/devices

Ford Bronco Ii 1990 Visibility Rearview Mirrors/devices Review #715716

FORD BRONCO II 1990 car safety problem was reported on Sept 01, 1999.FORD BRONCO II 1990, manufactured by FORD MOTOR COMPANY had a problem with VISIBILITY:REARVIEW MIRRORS/DEVICES . the driver side door mirror flops down is unusable when driving on the highway. this occurs above 55 mph. i am concerned this might cause an accident because you have to look behind you and take your eyes of the road to see if it is clear to change lanes. this is the second driver door mirror that i have purchased for this vehicle. i replaced the passenger and the driver side door mirrors on 1/31/98..Vehicle Identification Number (VIN):1FMCU12TXLU. Ford Bronco Ii 1990 problem was reported in BRADENTON, FL. Vehicle was purchased on Oct 01, 1991. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Ford Bronco Ii 1990 drive type:FWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. VEHICLE SPEED: 55 mph.

Ford Bronco Ii 1990 Vehicle Speed Control Accelerator Pedal

Ford Bronco Ii 1990 Vehicle Speed Control Accelerator Pedal Review #720538

FORD BRONCO II 1990 car safety problem was reported on Mar 03, 2000.FORD BRONCO II 1990, manufactured by FORD MOTOR COMPANY had a problem with VEHICLE SPEED CONTROL:ACCELERATOR PEDAL . (1)accelerator sticks when pressed to the floor merging into main traffic flow. two occurrences with original part (est. 121000/123000 mileage) and one occurrence after replacement (est. 124500 mileage). (2) large chips of paint (approx. 6"x4") peel off during high winds and/or driving speed up to 65mph. *ak.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FMCU14TXLU. Ford Bronco Ii 1990 problem was reported in SUITLAND, MD. Vehicle was purchased on June 01, 1992. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Ford Bronco Ii 1990 drive type:4WD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. VEHICLE SPEED: 55 mph.

Ford Bronco Ii 1990 Tires Tread/belt

Ford Bronco Ii 1990 Tires Tread/belt Review #731050

FORD BRONCO II 1990 car safety problem was reported on Aug 23, 2000.FORD BRONCO II 1990, manufactured by FORD MOTOR COMPANY had a problem with TIRES:TREAD/BELT . while driving on i-35 near norman oklahoma in my recently acquired 1990, ford bronco ii, the tread on my right front tire completely seperated . the incident came completely unexpected, with no prior warning whatsoever. fortunately, i was only driving 60 mph, and was able to keep the vehicle under control. however, the seperated tire tread put a significant dent in the right front quarter panel before i was able to stop the vehicle. this tire had good, thick tread, and because it was not one of the types in firestone's recent recall, i believed it to be safe. because i bought this vehicle used, i do not have receipts for the two front matching firestone tires on the vehicle. i took the tire to a firestone dealer here in norman, and the manager simply insisted that i must have hit something in the road or that the tire was underinflated.....i attest most certainly that neither was the case. to be honest, i am mostly just happy that i didn't have an accident as a result of this tire failure. however, i think your organization should take this as evidence that firestone's recall should definately be broadened. it simply baffels me that this companies products contnue to put peoples lives in jeopardy, and yet they refuse to act truly responsibly and recall all the faulty tires. i have retained both tires as well as photos of the tires and the damage to my vehicle. *ak( dot number: w2ul1ml489 tire size: p205/75r15 ).0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FMCU12T1LU. Ford Bronco Ii 1990 problem was reported in NORMAN, OK. Vehicle was purchased on July 01, 2000. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Ford Bronco Ii 1990 drive type:RWD. FUEL TYPE: GAS. VEHICLE SPEED: 60 mph.

Ford Bronco Ii 1990 Tires Tread/belt Review #557294

FORD BRONCO II 1990 car safety problem was reported on Nov 01, 1995.FORD BRONCO II 1990, manufactured by FORD MOTOR COMPANY had a problem with TIRES:TREAD/BELT . firestone tire experienced tread separation causing vehicle to rollover, consumer sustained injuries from accident. *slc.1 person(s) were injured. Vehicle Identification Number (VIN):1FMCU12T4LU. Ford Bronco Ii 1990 problem was reported in HOSFORD, FL. Vehicle was purchased on Sept 26, 1994. Vehicle was using Cruise Control.FUEL SYSTEM:N/A. Ford Bronco Ii 1990 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 65 mph.

Ford Bronco Ii 1990 Tires Review #736917

FORD BRONCO II 1990 car safety problem was reported on July 30, 2000.FORD BRONCO II 1990, manufactured by FORD MOTOR COMPANY had a problem with TIRES . during a cross country trip we experienced severe tire blow out on our left rear tire at 65 mph on georgia highway 70 outside dalton ga. the blow our cause our '90 ford bronco ii to go off the highway and roll 8 times travelling a total of 250 feet. my husband was the passenger and was hospitalized after we came to a stop after colliding with a large pine tree. my 3 year old daughter and i were not hospitalized. we were all wearing our seat belts. visual inspection of the tire shows the tread completely seperated from the tire which was still under warranty. contact with the seller of the tire got no answer except to send the tire back to cooper tire. we live in chicago il and the wrecked car and tire are in dalton georgia so this is not feasable. hospital bills and the loss of our only vehical has put a tremendous strain on our finances and a trip to georgia to reclaim the tire and vehicle are not possible. (tiresize: 215/70r15)( dot number: tire size: 215/70r15 ).Vehicle was involved in a crash. 3 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):1FMCU14T7LU. Ford Bronco Ii 1990 problem was reported in CHICAGO, IL. Accident was reported to Police. Vehicle was purchased on Nov 01, 1997. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Ford Bronco Ii 1990 drive type:4WD. FUEL TYPE: GAS. VEHICLE SPEED: 65 mph.

Ford Bronco Ii 1990 Engine And Engine Cooling Cooling System

Ford Bronco Ii 1990 Engine And Engine Cooling Cooling System Review #10062645

FORD BRONCO II 1990 car safety problem was reported on Feb 14, 2004.FORD BRONCO II 1990, manufactured by FORD MOTOR COMPANY had a problem with ENGINE AND ENGINE COOLING:COOLING SYSTEM . thermostat caused engine to overheat. *ak.Mileage was 139665 miles. Ford Bronco Ii 1990 problem was reported in EDGERTON, WI. Vehicle was purchased on Jan 15, 2004. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Ford Bronco Ii 1990 drive type:4WD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Ford Bronco Ii 1990 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 60 mph.

Ford Bronco Ii 1990 Electrical System Wiring Front Underhood

Ford Bronco Ii 1990 Electrical System Wiring Front Underhood Review #10066482

FORD BRONCO II 1990 car safety problem was reported on Mar 14, 2004.FORD BRONCO II 1990, manufactured by FORD MOTOR COMPANY had a problem with ELECTRICAL SYSTEM:WIRING:FRONT UNDERHOOD . my last two alternators burst into flames. the mechanic who changed the last one said that he "has replaced hundreds" in the last ten years *ak.Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Mileage was 170100 miles. Vehicle Identification Number (VIN):1FMCU14T2LU. Ford Bronco Ii 1990 problem was reported in TAMPA, FL. Vehicle was purchased on Dec 14, 1999. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Ford Bronco Ii 1990 drive type:4WD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Ford Bronco Ii 1990 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 0 mph.

Ford Bronco Ii 1990 Service Brakes, Hydraulic Foundation Components Disc Rotor

Ford Bronco Ii 1990 Service Brakes, Hydraulic Foundation Components Disc Rotor Review #10214482

FORD BRONCO II 1990 car safety problem was reported on Dec 01, 2007.FORD BRONCO II 1990, manufactured by FORD MOTOR COMPANY had a problem with SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:ROTOR . tl*the contact owns a 1990 ford bronco ii. while driving approximately 35 mph in dry weather, the contact heard a loud clank from the rear of the vehicle. he noticed that the brake rotor failed. when the brake was removed from the rear passenger side, all of the components fell out. nhtsa campaign id number 98e010000 (service brakes, air:disc:rotor) was referenced. the vehicle was taken to the dealer to be repaired. the powertrain was unknown. the current and failure mileages were 164,058..0 person(s) were injured. 0 person(s) died.Mileage was 164058 miles. Vehicle Identification Number (VIN):1FMCU14T1LU. Ford Bronco Ii 1990 problem was reported in DAVIDSON, NC. Original Owner. Vehicle was purchased on Jan 01, 1990. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Ford Bronco Ii 1990 drive type:U. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Ford Bronco Ii 1990 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 35 mph.


Ford Bronco Ii 1990 Systems


Electrical System Alternator/generator/regulator 1 Review(s)

Electrical System Wiring Front Underhood 1 Review(s)

Engine And Engine Cooling Cooling System 1 Review(s)

Engine And Engine Cooling Engine 4 Review(s)

Engine And Engine Cooling Engine Gasoline 1 Review(s)

Equipment Electrical Air Conditioner 1 Review(s)

Fuel System, Gasoline 1 Review(s)

Fuel System, Gasoline Storage Tank Assembly 2 Review(s)

Power Train Automatic Transmission 2 Review(s)

Power Train Manual Transmission 1 Review(s)

Seat Belts Front Buckle Assembly 1 Review(s)

Seat Belts Front Retractor 1 Review(s)

Seats 1 Review(s)

Service Brakes, Electric 1 Review(s)

Service Brakes, Hydraulic 2 Review(s)

Service Brakes, Hydraulic Antilock 1 Review(s)

Service Brakes, Hydraulic Foundation Components 2 Review(s)

Service Brakes, Hydraulic Foundation Components Disc Rotor 1 Review(s)

Structure Frame And Members 1 Review(s)

Suspension Front 2 Review(s)

Tires 1 Review(s)

Tires Tread/belt 2 Review(s)

Vehicle Speed Control Accelerator Pedal 1 Review(s)

Visibility Rearview Mirrors/devices 1 Review(s)



Search 1000s of Car Reviews, Recalls and Technical Bulletins
Start by entering a car model, system, manufacturer or any combination of keywords.


Ford Bronco Ii 1990 Reports


my 95 ford exploere engine surges when turn my air conditioner on

Ihave a 1994 ford probe which has started to idle very low and stalls at times. It is a 4 cyl. w/ air and a 5 speed. any ideas? I replaced the fuel filter, air flow meter and added HEAT to gas tank to dry and clean fuel system. I think my pcv valv

should a standard transmission truck start when it is in gear without the clucth engaged?

should a 2005 standard transmission ford ranger start when in gear without the clutch engaged?

96 Ford F250 Emergency brake lever gets caught on the auto adjustment spring, causing brakes to be permanently engaged, also allowing the parking break lever to rub against the hub, which can cut through over time.

try pushing the pedals button closer to you. you must have the pedal adjustment button to the left of the radio, looks like a foot, that brings the pedals more inward towards the driver. hope it helped. or look carefully if a wire has corroded. it

i would check ur multi switch on ur stearing colum

on the pedal

whats the sound

Just bought an '06 E-350 van. Left d'ship got on highway and noticed shimmy when I got to 60....same problem????

that happened to me last night! If you rock the car back and for while shifting then it should release the safety lock!

why does it take turning off the veh. while pulling in on the shifter arm, them starting it again while still holding it inwards ever so slightly??

Discuss Ford Bronco Ii


No comments have been provided.