Car-and-Safety.com

Dodge Ram 2500 2010 Steering Linkages Tie Rod Assembly

Dodge Ram 2500 2010 Steering Linkages Tie Rod Assembly Review #10370771

DODGE RAM 2500 2010 car safety problem was reported on Dec 14, 2010.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with STEERING:LINKAGES:TIE ROD ASSEMBLY . tl*the contact owns a 2010 dodge ram 2500. the contact stated that the vehicle steering tie rod was defective, he experienced two failures with the steering tie rod. the first failure occurred at the drag link to the pitman arm, the second occurrence was on december 14, 2010 at the steering tie rod connected to the drivers front tire. the vehicle will be towed to the dealer. the vin was not available. the failure mileage was 10,000 and the current mileage was 15,000. .Mileage was 15000 miles. Dodge Ram 2500 2010 problem was reported in BEAUMONT, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 10 mph.

Dodge Ram 2500 2010 Steering Review #10373546

DODGE RAM 2500 2010 car safety problem was reported on Dec 27, 2010.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . i was backing my 2010 dodge ram 2500 4x4 with 6200 miles on it out of a parking spot. there was snow on the ground and the truck was in four wheel drive. i backed out and put the truck in drive and i heard a load snap. the truck went forward roughly 30 yards then came to a sudden stop and would not go forward no mater how much i pushed on the accelerator pedal. i got out of the truck walked to the front and noticed both tires were toed in. the driver side outer tie rod end had broken. the truck was towed to the dodge dealer who said that i hit something cause tie rods just don't break like that. i assure you i hit nothing! they charged me $637 to replace the whole steering linkage with a kit that they said was an upgraded steering system. someone is going to be killed driving one of these trucks and having this happen to them. i am not the only 2010 2500 ram owner with this problem. i have all old parts. *tr.Mileage was 6239 miles. Vehicle Identification Number (VIN):3D7UT2CL6AG. Dodge Ram 2500 2010 problem was reported in LEVITTOWN, PA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Dodge Ram 2500 2010 drive type:4WD. VEHICLE SPEED: 15 mph.

Dodge Ram 2500 2010 Steering Review #10374741

DODGE RAM 2500 2010 car safety problem was reported on June 01, 2010.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . tl*the contact owns a 2010 dodge ram 2500. while driving at any speed the steering wheel would easily turn to the left and right, forcing the contact to constantly correct the direction the vehicle was traveling in. the vehicle was taken to an authorized dealer on two occasions where they were unable to diagnose the failure. the vehicle was not repaired. the failure mileage was 150 and the current mileage was 1,500. updated 3/7/11 *cn the dealer installed a new gear box on feb 23, 2011. updated 04/29/11 .Mileage was 150 miles. Vehicle Identification Number (VIN):3D7LT2ET3AG. Dodge Ram 2500 2010 problem was reported in BARNESVILLE, OH. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS.

Dodge Ram 2500 2010 Exterior Lighting Headlights

Dodge Ram 2500 2010 Exterior Lighting Headlights Review #10392038

DODGE RAM 2500 2010 car safety problem was reported on Mar 01, 2011.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with EXTERIOR LIGHTING:HEADLIGHTS . 2010 dodge ram 2500. consumer states that headlights in general are poor at best and in particular the high beam headlights are terrible *tgw the consumer stated the truck is equipped with a dual headlight system. there was little light projected onto the highway. *jb .Vehicle Identification Number (VIN):3D7LT2EL7AG. Dodge Ram 2500 2010 problem was reported in HOAGLAND, IN. Vehicle was purchased on Sept 01, 2010. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL SYSTEM:Turbo. FUEL TYPE: DIESEL.

Dodge Ram 2500 2010 Engine And Engine Cooling Exhaust System

Dodge Ram 2500 2010 Engine And Engine Cooling Exhaust System Review #10393002

DODGE RAM 2500 2010 car safety problem was reported on Dec 02, 2010.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with ENGINE AND ENGINE COOLING:EXHAUST SYSTEM . 1. normal driving, 2. check engine light, emissions failure and it happens with two days of getting out of the shop, 3. replaced parts/repaired at least 14 times and is still broken. *tr.Mileage was 1300 miles. Vehicle Identification Number (VIN):3D7UT2CLXAG. Dodge Ram 2500 2010 problem was reported in FAIRBANKS, AK. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Dodge Ram 2500 2010 drive type:4WD. VEHICLE SPEED: 15 mph.

Dodge Ram 2500 2010 Steering Linkages Tie Rod Assembly

Dodge Ram 2500 2010 Steering Linkages Tie Rod Assembly Review #10394470

DODGE RAM 2500 2010 car safety problem was reported on Apr 01, 2011.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with STEERING:LINKAGES:TIE ROD ASSEMBLY . tl * the contact owns a 2010 dodge ram 2500. the contact stated while attempting to park, he placed the vehicle in reverse, turned the steering wheel and heard a loud thump. after the loud sound, the steering had become difficult to maneauver. when he got out to look at the vehicle, he saw that the front driver side tire was turned right and the right front passenger side was straight. the contact had the vehicle towed to a dealer and they replaced the tie rod assembly. the dealer told the contact there is a nhtsa campaign id number: 10v657000 (steering: linkages: tie rod assembly) that was issued for the 4500 and 5500, but not this model. the contact is concerned about the safety of the vehicle, because the tie rod was replaced with the same type of tie rod assembly, and not a newly manufacturerd one. the failure and current mileage was 31,879..Mileage was 31879 miles. Vehicle Identification Number (VIN):3D7UT2CL1AG. Dodge Ram 2500 2010 problem was reported in MISSION, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Suspension Front

Dodge Ram 2500 2010 Suspension Front Review #10396735

DODGE RAM 2500 2010 car safety problem was reported on Apr 15, 2011.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with SUSPENSION:FRONT . driving 2010 ram 2500 megacab diesel 4x4 with 13950 miles on odometer. prior to trip noted that steering wheel freeplay was getting worse and noted needed to have checked by dealer under warranty the following week. while traveling on highway at 70mph, went over average bump - front end continued to shake and bounce violently until speed dropped below 40mph. pulled over checked tires, steering components and general condition for roadside inspection -found no defects. continued on road. 10 miles later at 64mph had same violent reaction to bump till below 40mph. 20 miles later event occurred again. immediately took to dealer for evaluation. the dealer removed and replaced trackbar and tie rod, aligned front end, test drove and still noted wobble but improved. they then decided to replace the steering snubber. the dealer closed so i don't know if that resolved the issue yet or not. the tech said if it still wobbled that they would change the wheel bearing to resolve the issue. i will find out in the morning if the wheel bearing will require replacement. *tr.Mileage was 13950 miles. Vehicle Identification Number (VIN):3D7UT2HL8AG. Dodge Ram 2500 2010 problem was reported in CROSBY, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Dodge Ram 2500 2010 drive type:4WD. FUEL TYPE: DIESEL. VEHICLE SPEED: 70 mph.

Dodge Ram 2500 2010 Steering

Dodge Ram 2500 2010 Steering Review #10396735

DODGE RAM 2500 2010 car safety problem was reported on Apr 15, 2011.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . driving 2010 ram 2500 megacab diesel 4x4 with 13950 miles on odometer. prior to trip noted that steering wheel freeplay was getting worse and noted needed to have checked by dealer under warranty the following week. while traveling on highway at 70mph, went over average bump - front end continued to shake and bounce violently until speed dropped below 40mph. pulled over checked tires, steering components and general condition for roadside inspection -found no defects. continued on road. 10 miles later at 64mph had same violent reaction to bump till below 40mph. 20 miles later event occurred again. immediately took to dealer for evaluation. the dealer removed and replaced trackbar and tie rod, aligned front end, test drove and still noted wobble but improved. they then decided to replace the steering snubber. the dealer closed so i don't know if that resolved the issue yet or not. the tech said if it still wobbled that they would change the wheel bearing to resolve the issue. i will find out in the morning if the wheel bearing will require replacement. *tr.Mileage was 13950 miles. Vehicle Identification Number (VIN):3D7UT2HL8AG. Dodge Ram 2500 2010 problem was reported in CROSBY, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Dodge Ram 2500 2010 drive type:4WD. FUEL TYPE: DIESEL. VEHICLE SPEED: 70 mph.

Dodge Ram 2500 2010 Service Brakes, Hydraulic

Dodge Ram 2500 2010 Service Brakes, Hydraulic Review #10397979

DODGE RAM 2500 2010 car safety problem was reported on Apr 26, 2011.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with SERVICE BRAKES, HYDRAULIC . the dealer performed recall k33 service today. before service, the brake lights stayed illuminated about 1 second after the brake pedal was released. after service, the brake lights still stayed illuminated about 1 second after the brake pedal was released. the ps reservoir cap was replaced, but this does not solve the problem. the brake safety interlock for the shift lever also stays disengaged for the same 1 second when the shift lever is in "park". however, my concern has been and still is that my trailer brakes also remain engaged for the same 1 second interval after the brake pedal is released. this is most noticeable when stopped at a light. i have to release the brake pedal, wait about 1 second for the trailer brakes to release, then begin to accelerate. this puts unnecessary strain on my trailer brakes, and is a concern in wet or snowy conditions when the vehicle is moving. the trailer brake control works properly, and since the trailer brakes disengage and the truck brake lights turn off at the same time, this is obviously the same problem, and is not solved by replacing the power steering reservoir cap. *tr.Mileage was 12 miles. Vehicle Identification Number (VIN):3D7UT2CLXAG. Dodge Ram 2500 2010 problem was reported in WENATCHEE, WA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Dodge Ram 2500 2010 drive type:4WD. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2010 Structure

Dodge Ram 2500 2010 Structure Review #10399261

DODGE RAM 2500 2010 car safety problem was reported on June 10, 2010.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with STRUCTURE . tl* the contact owns a 2001 dodge ram 2500. the contact stated that the dashboard was fractured down the middle and had disintegrated. in addition, the fracture of the dashboard was interfering with the air conditioning unit and the unit had failed. the vehicle was taken to a mechanic where the contact was advised that the dashboard and air conditioner wires would need to be replaced. the manufacturer was contacted and advised that they were unable to provide any assistance. the vehicle was not repaired and the vin was not available. the approximate failure mileage was 100,000. .Mileage was 100000 miles. Dodge Ram 2500 2010 problem was reported in UNION GROVE, AL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2010 Steering

Dodge Ram 2500 2010 Steering Review #10400491

DODGE RAM 2500 2010 car safety problem was reported on Dec 28, 2010.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . after turning a corner on a black top road, the steering went completely out and the wheel would spin 360 with no control. luckily there were no other vehicles involved. i was able to get the vehicle off the road and partially into the ditch. it was determined that a bolt was either missing or fell out of the steering column..0 person(s) were injured. 0 person(s) died.Mileage was 11000 miles. Vehicle Identification Number (VIN):3D7UT2CL2AG. Dodge Ram 2500 2010 problem was reported in HATLEY, WI. Vehicle was not using Cruise Control. VEHICLE SPEED: 35 mph.

Dodge Ram 2500 2010 Steering Review #10406088

DODGE RAM 2500 2010 car safety problem was reported on June 11, 2011.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . bought 2010 ram 2500 diesel new and had to take to dealer to this point 5 times for check engine light illuminated. the truck has currently 16,338 miles and is returning to dealer tomorrow for another check engine light. each time the light is in relation to the emission system. the dealer under warranty has changed the o2 sensors, cleaned the egr valve and states they may have to change the o2 sensor controller. i've also posted on this site about a major steering wobble to which the dealer changed a lot of front steering components. this truck design has a lot of history of major design flaws. i'm strongly considering filing a lemon law suit. *tr.Mileage was 16338 miles. Vehicle Identification Number (VIN):3D7UT2HL8AG. Dodge Ram 2500 2010 problem was reported in CROSBY, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Dodge Ram 2500 2010 drive type:4WD. FUEL TYPE: DIESEL.

Dodge Ram 2500 2010 Engine And Engine Cooling Engine Diesel

Dodge Ram 2500 2010 Engine And Engine Cooling Engine Diesel Review #10406088

DODGE RAM 2500 2010 car safety problem was reported on June 11, 2011.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with ENGINE AND ENGINE COOLING:ENGINE:DIESEL . bought 2010 ram 2500 diesel new and had to take to dealer to this point 5 times for check engine light illuminated. the truck has currently 16,338 miles and is returning to dealer tomorrow for another check engine light. each time the light is in relation to the emission system. the dealer under warranty has changed the o2 sensors, cleaned the egr valve and states they may have to change the o2 sensor controller. i've also posted on this site about a major steering wobble to which the dealer changed a lot of front steering components. this truck design has a lot of history of major design flaws. i'm strongly considering filing a lemon law suit. *tr.Mileage was 16338 miles. Vehicle Identification Number (VIN):3D7UT2HL8AG. Dodge Ram 2500 2010 problem was reported in CROSBY, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Dodge Ram 2500 2010 drive type:4WD. FUEL TYPE: DIESEL.

Dodge Ram 2500 2010 Steering Linkages Tie Rod Assembly

Dodge Ram 2500 2010 Steering Linkages Tie Rod Assembly Review #10407210

DODGE RAM 2500 2010 car safety problem was reported on June 16, 2011.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with STEERING:LINKAGES:TIE ROD ASSEMBLY . tl*the contact owns a 2010 dodge ram 2500. the contact state while driving at a low speed he heard a snapping noise and lost control of the steering wheel. the contact observed that the drivers side tire was out of place. the vehicle was towed to the dealer who performed a diagnostic test and stated the failure was located on the drivers left tie rod stud. the manufacturer filed report 20991683. the vehicle was not repaired. the failure and the current miles was 22,000..Mileage was 22000 miles. Vehicle Identification Number (VIN):3D7UT2CL2AG. Dodge Ram 2500 2010 problem was reported in HOUSTON, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 15 mph.

Dodge Ram 2500 2010 Engine And Engine Cooling Exhaust System Emission Control

Dodge Ram 2500 2010 Engine And Engine Cooling Exhaust System Emission Control Review #10416860

DODGE RAM 2500 2010 car safety problem was reported on July 08, 2011.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL . tl* the contact owns a 2010 dodge ram 2500. the contact stated that the exhaust fumes entered the vehicle through the cab and could cause health complications. whenever the fumes were present, the check engine warning light would illuminate. the delaer inspected the vehicle and reprogrammed and replaced the o2 censor since it had failed. after the repairs, the contact continued to smell the fumes. the manufacturer was notified of the failure; however, did not offer any assistance. the approximate failure mileage was 8,500. updated 09/21/11*lj chrysler informed the consumer they didn't have a fix for the emissions system failure and they would contact him when they did. updated 10/03/11.1 person(s) were injured. Mileage was 8500 miles. Vehicle Identification Number (VIN):3D7UT2HLXAG. Dodge Ram 2500 2010 problem was reported in ALVIN, TX. Vehicle was purchased on Mar 01, 2010. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Dodge Ram 2500 2010 drive type:4WD. FUEL SYSTEM:Turbo. FUEL TYPE: DIESEL. Dodge Ram 2500 2010 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2010 Steering

Dodge Ram 2500 2010 Steering Review #10422855

DODGE RAM 2500 2010 car safety problem was reported on Aug 16, 2011.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . my front end was violent, shaking from left to right, the steering wheel was vibrating wildly. *tr.Mileage was 32000 miles. Vehicle Identification Number (VIN):3D7UT2CL3AG. Dodge Ram 2500 2010 problem was reported in TEXAS, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 60 mph.

Dodge Ram 2500 2010 Suspension Front

Dodge Ram 2500 2010 Suspension Front Review #10422855

DODGE RAM 2500 2010 car safety problem was reported on Aug 16, 2011.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with SUSPENSION:FRONT . my front end was violent, shaking from left to right, the steering wheel was vibrating wildly. *tr.Mileage was 32000 miles. Vehicle Identification Number (VIN):3D7UT2CL3AG. Dodge Ram 2500 2010 problem was reported in TEXAS, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 60 mph.

Dodge Ram 2500 2010 Steering

Dodge Ram 2500 2010 Steering Review #10426520

DODGE RAM 2500 2010 car safety problem was reported on Aug 26, 2011.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . while driving my truck with my 6 yr old son the steering system failed. the truck lost all control of the steering and the wheels locked in place. the left tie rod failed, the steering arm jammed into the left wheel locking the wheels in a tight steering position. chrysler has not acknowledged the problem or acted in responsible manor to inform me of why or how this happened. chrysler did replace the left tie rod but refused to replace the right side or compensate me for the cost of a new rim. due to the fact the tie rod failed the wheel was cracked by the steering arm and needed replacement. this is a heavy duty truck built for and use for towing. failure of this component under load or at a higher speed would be catastrophic. i am very concerned for the safety of my family and the american public. *tr.Mileage was 17828 miles. Vehicle Identification Number (VIN):3D7UT2CL1AG. Dodge Ram 2500 2010 problem was reported in TACOMA, WA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 5 mph.

Dodge Ram 2500 2010 Electrical System Wiring

Dodge Ram 2500 2010 Electrical System Wiring Review #10428531

DODGE RAM 2500 2010 car safety problem was reported on Sept 01, 2011.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with ELECTRICAL SYSTEM:WIRING . 2010 dodge ram 2500. consumer writes in regards to vehicle being a lemon *tgw the consumer stated the dealer has been unable to determine why the check engine light continues to illuminate. on one occasion, the vehicle stalled during rush hour traffic. the vehicle had to be towed. the dealer informed the consumer, the wiring harness was the problem. however, the part was on back order. *jb.Vehicle Identification Number (VIN):3D7UT2CL7AG. Dodge Ram 2500 2010 problem was reported in SAUGUS, MA. Vehicle was purchased on Feb 28, 2010. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL SYSTEM:Turbo. FUEL TYPE: DIESEL. DEALER'S NAME: HERB CHAMBERS CHRYSLER JEEP . DEALER'S CITY: DANVERS . DEALER'S STATE CODE: MA.

Dodge Ram 2500 2010 Engine And Engine Cooling

Dodge Ram 2500 2010 Engine And Engine Cooling Review #10428531

DODGE RAM 2500 2010 car safety problem was reported on Sept 01, 2011.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with ENGINE AND ENGINE COOLING . 2010 dodge ram 2500. consumer writes in regards to vehicle being a lemon *tgw the consumer stated the dealer has been unable to determine why the check engine light continues to illuminate. on one occasion, the vehicle stalled during rush hour traffic. the vehicle had to be towed. the dealer informed the consumer, the wiring harness was the problem. however, the part was on back order. *jb.Vehicle Identification Number (VIN):3D7UT2CL7AG. Dodge Ram 2500 2010 problem was reported in SAUGUS, MA. Vehicle was purchased on Feb 28, 2010. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL SYSTEM:Turbo. FUEL TYPE: DIESEL. DEALER'S NAME: HERB CHAMBERS CHRYSLER JEEP . DEALER'S CITY: DANVERS . DEALER'S STATE CODE: MA.

Dodge Ram 2500 2010 Steering

Dodge Ram 2500 2010 Steering Review #10438586

DODGE RAM 2500 2010 car safety problem was reported on Dec 03, 2011.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact stated that the driver side tie rod fractured while driving 15 mph. the contact referenced nhtsa campaign id number: 11v350000 (steering:linkages:tie rod assembly) but could not confirm if the vehicle was included in the recall. neither the dealer nor the manufacturer was notified of the failure. the vehicle was not repaired. the failure and the current mileage was 15,700. .Mileage was 15700 miles. Vehicle Identification Number (VIN):3D7UP2CL78G. Dodge Ram 2500 2010 problem was reported in MILWAUKIE, OR. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Suspension

Dodge Ram 2500 2010 Suspension Review #10439290

DODGE RAM 2500 2010 car safety problem was reported on Dec 01, 2010.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with SUSPENSION . at or around 55 to 60 miles per hour when hitting a irregularity in roadway truck will bounce out of control until i slam the brakes and slow down to 35 miles per hour . the truck is completely stock. the dealership said it was the tires. these are the stock tires on the truck and they are in good shape. i do not fell i should have to replace stock tires on a new truck to stop it from shimming when over 55 mile an hour. this was a expensive truck and i am very disappointed in it. i feel the dealership should stand behind it. please get back to me on my next step. i am very unhappy with the truck and the service i have received. this is not my first dodge truck. *tr.Mileage was 8000 miles. Vehicle Identification Number (VIN):1J4GA39197L. Dodge Ram 2500 2010 problem was reported in BROWNSVILLE, PA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 60 mph.

Dodge Ram 2500 2010 Tires

Dodge Ram 2500 2010 Tires Review #10439290

DODGE RAM 2500 2010 car safety problem was reported on Dec 01, 2010.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with TIRES . at or around 55 to 60 miles per hour when hitting a irregularity in roadway truck will bounce out of control until i slam the brakes and slow down to 35 miles per hour . the truck is completely stock. the dealership said it was the tires. these are the stock tires on the truck and they are in good shape. i do not fell i should have to replace stock tires on a new truck to stop it from shimming when over 55 mile an hour. this was a expensive truck and i am very disappointed in it. i feel the dealership should stand behind it. please get back to me on my next step. i am very unhappy with the truck and the service i have received. this is not my first dodge truck. *tr.Mileage was 8000 miles. Vehicle Identification Number (VIN):1J4GA39197L. Dodge Ram 2500 2010 problem was reported in BROWNSVILLE, PA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 60 mph.

Dodge Ram 2500 2010 Steering Linkages Tie Rod Assembly

Dodge Ram 2500 2010 Steering Linkages Tie Rod Assembly Review #10440361

DODGE RAM 2500 2010 car safety problem was reported on Dec 18, 2011.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with STEERING:LINKAGES:TIE ROD ASSEMBLY . tl* the contact owns a 2010 dodge ram 2500. while driving 25 mph, the driver side tie rod fractured, causing the tire to detach from the vehicle. the vehicle was towed to the dealer who advised the contact that there his vin was not included in the recall associated with nhtsa campaign id number: 11v350000 (steering: linkages: tie rod assembly). the manufacturer was notified of the failure and a claim was filed (claim number:21674760). the failure mileage was 18,000. .Mileage was 18000 miles. Vehicle Identification Number (VIN):3D7UT2CL9AG. Dodge Ram 2500 2010 problem was reported in GREER, SC. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 25 mph.

Dodge Ram 2500 2010 Service Brakes, Hydraulic

Dodge Ram 2500 2010 Service Brakes, Hydraulic Review #10441161

DODGE RAM 2500 2010 car safety problem was reported on Aug 01, 2011.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with SERVICE BRAKES, HYDRAULIC . the integrated trailer brake controller failed to adequately activate the brakes on my 24' pj flatbed trailer. *tr.Dodge Ram 2500 2010 problem was reported in FORTSON, GA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering

Dodge Ram 2500 2010 Steering Review #10444104

DODGE RAM 2500 2010 car safety problem was reported on Jan 17, 2012.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact stated that while exiting out of the parking space, the contact heard something snap coming from the front driver side wheel. the contact was unable to turn the steering wheel after the sound. the vehicle was towed to the contact's residence and the manufacturer was contacted. the contact referenced nhtsa campaign id number: 10v657000 (steering:linkages:tie rod assembly)but was advised that the vin was not included in the recall. the vehicle was not repaired. the failure and the current mileage was 60,000. .Mileage was 60000 miles. Vehicle Identification Number (VIN):3D7UT2CL7AG. Dodge Ram 2500 2010 problem was reported in FAIRMONT, WV. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10445607

DODGE RAM 2500 2010 car safety problem was reported on Jan 27, 2012.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . drivers side tie rod end broke in half while backing up with wheel turned to right. this caused complete loss of steering control. there was no previous problems, or noises to indicate a problem. had this happened while driving forward at a higher rate of speed it would probable have cause a roll over. in addition had the recall that was issued for 2008 to 2011 dodge 2500 trucks included my vin number, the failure could have been avoided. *tr.Vehicle Identification Number (VIN):3D7UT2CL2AG. Dodge Ram 2500 2010 problem was reported in BEAUMONT, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 2 mph.

Dodge Ram 2500 2010 Steering Review #10446258

DODGE RAM 2500 2010 car safety problem was reported on Feb 01, 2012.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . drivers side tie rod end broke while pulling out of a parking space with wheel turned to left. this caused complete loss of steering control. there was no previous problems, or noises to indicate a problem. had this happened while driving forward at a higher rate of speed it would most likely have cause a accident. in addition had the recall that was issued for 2008 to 2011 dodge 2500 trucks included my vin number, the failure could have been avoided. *kb.Mileage was 61000 miles. Vehicle Identification Number (VIN):3D7UT2HL5AG. Dodge Ram 2500 2010 problem was reported in SHADY SHORES, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Dodge Ram 2500 2010 drive type:4WD. FUEL TYPE: DIESEL. VEHICLE SPEED: 5 mph.

Dodge Ram 2500 2010 Steering Review #10449323

DODGE RAM 2500 2010 car safety problem was reported on Feb 25, 2012.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . backing out of a parking spot and turned the wheel to the left and heard a loud bang from under the truck. got out and looked under the truck and saw the left outer tie rod broken. luckily i was only going in reverse and not doing 55 mph. i had ny whole wife and 3 kids in the truck. a quick search on google and you will find numerous complaints on the same problem. some even 2x in a month on the same truck. *tr.Mileage was 10615 miles. Vehicle Identification Number (VIN):3D7UT2CL3AG. Dodge Ram 2500 2010 problem was reported in GARDEN CITY, NY. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 5 mph.

Dodge Ram 2500 2010 Steering Review #10450721

DODGE RAM 2500 2010 car safety problem was reported on Mar 05, 2012.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact stated that the vehicle was included in nhtsa campaign id numb: 11v350000 (steering:linkages:tie rod assembly). the vehicle was taken to an authorized dealer where the contact was informed that the parts needed to remedy the recalled component were not available. the contact was not provided a timetable as to when the parts would become available. the manufacturer was not made aware of the situation. the contact had not experienced a failure. the vin was unavailable. .Mileage was 45000 miles. Dodge Ram 2500 2010 problem was reported in MCALESTER, OK. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2010 Suspension

Dodge Ram 2500 2010 Suspension Review #10460428

DODGE RAM 2500 2010 car safety problem was reported on June 03, 2012.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with SUSPENSION . horrible squeak coming from somewhere in the driver side rear of the cab. the dealership and myself cannot locate the source of the noise. i feel like im in a seinfield episode. please someone help me!!!!! *tr.0 person(s) were injured. 0 person(s) died.Mileage was 42000 miles. Dodge Ram 2500 2010 problem was reported in BEND, OR. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 55 mph.

Dodge Ram 2500 2010 Structure

Dodge Ram 2500 2010 Structure Review #10460428

DODGE RAM 2500 2010 car safety problem was reported on June 03, 2012.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with STRUCTURE . horrible squeak coming from somewhere in the driver side rear of the cab. the dealership and myself cannot locate the source of the noise. i feel like im in a seinfield episode. please someone help me!!!!! *tr.0 person(s) were injured. 0 person(s) died.Mileage was 42000 miles. Dodge Ram 2500 2010 problem was reported in BEND, OR. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 55 mph.

Dodge Ram 2500 2010 Suspension

Dodge Ram 2500 2010 Suspension Review #10470237

DODGE RAM 2500 2010 car safety problem was reported on Nov 21, 2011.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with SUSPENSION . i was on the highway, it was raining and hit a small bump and the whole truck started violently bouncing everywhere (inside the cab and outside) like all four tires stopped turning. it was so bad that my briefcase, cell phone and water got thrown. i couldn't steer too well so i hit the brakes and stopped on the highway then went very slow to a gas station and two strangers followed me to see if i was okay and they both said that they think my truck went into 4-wheel drive by itself because my tires weren't turning. i took it into the wyatt arp dealer, they gave me a rental for 2 days. they said they could not duplicate and my 4-wheel drive problem. the paperwork says, "customer states was traveling 75 mph on hwy i-10 when raining rear tires locked up after hitting bump. unable to duplicate customer concern at this time". *tr.0 person(s) were injured. 0 person(s) died.Mileage was 18200 miles. Vehicle Identification Number (VIN):3D7UT2CL9AG. Dodge Ram 2500 2010 problem was reported in SEGUIN, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 75 mph.

Dodge Ram 2500 2010 Steering

Dodge Ram 2500 2010 Steering Review #10470237

DODGE RAM 2500 2010 car safety problem was reported on Nov 21, 2011.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . i was on the highway, it was raining and hit a small bump and the whole truck started violently bouncing everywhere (inside the cab and outside) like all four tires stopped turning. it was so bad that my briefcase, cell phone and water got thrown. i couldn't steer too well so i hit the brakes and stopped on the highway then went very slow to a gas station and two strangers followed me to see if i was okay and they both said that they think my truck went into 4-wheel drive by itself because my tires weren't turning. i took it into the wyatt arp dealer, they gave me a rental for 2 days. they said they could not duplicate and my 4-wheel drive problem. the paperwork says, "customer states was traveling 75 mph on hwy i-10 when raining rear tires locked up after hitting bump. unable to duplicate customer concern at this time". *tr.0 person(s) were injured. 0 person(s) died.Mileage was 18200 miles. Vehicle Identification Number (VIN):3D7UT2CL9AG. Dodge Ram 2500 2010 problem was reported in SEGUIN, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 75 mph.

Dodge Ram 2500 2010 Wheels

Dodge Ram 2500 2010 Wheels Review #10470237

DODGE RAM 2500 2010 car safety problem was reported on Nov 21, 2011.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with WHEELS . i was on the highway, it was raining and hit a small bump and the whole truck started violently bouncing everywhere (inside the cab and outside) like all four tires stopped turning. it was so bad that my briefcase, cell phone and water got thrown. i couldn't steer too well so i hit the brakes and stopped on the highway then went very slow to a gas station and two strangers followed me to see if i was okay and they both said that they think my truck went into 4-wheel drive by itself because my tires weren't turning. i took it into the wyatt arp dealer, they gave me a rental for 2 days. they said they could not duplicate and my 4-wheel drive problem. the paperwork says, "customer states was traveling 75 mph on hwy i-10 when raining rear tires locked up after hitting bump. unable to duplicate customer concern at this time". *tr.0 person(s) were injured. 0 person(s) died.Mileage was 18200 miles. Vehicle Identification Number (VIN):3D7UT2CL9AG. Dodge Ram 2500 2010 problem was reported in SEGUIN, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 75 mph.

Dodge Ram 2500 2010 Steering

Dodge Ram 2500 2010 Steering Review #10470240

DODGE RAM 2500 2010 car safety problem was reported on Aug 08, 2012.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . i was on the highway doing around 75 and hit a small bump and all 4 tires locked up, the steering wheel and column shook violently, the dashboard and everything shook really hard. i started to hit the brakes and did not let go of the steering wheel even if it was shaking hard. my truck started to go onto the shoulder then went into the grass on the right and came to a stop. it was still running and i got out to look at the tires and underneath but nothing was wrong. i took it to a different dealer and told them i experienced this before and not to try to duplicate the complaint because it will go out of control. today they called me to say they replaced the ball joint (under warranty) but i have to pay for an alignment. i told them that i looked the symptoms up on the internet and saw this is a real problem that cant be fixed and i don't want this to happen to me again, they can keep it. why do i have to pay 700.00/month payments and also pay with my life or someone else's life too? i will not pick this 'fixed' truck up from the dealer. on the internet and you-tube its called, the death wobble and is what happened to me, only worse and twice! so, today i went to nhtsa and filed both complaints. believe me, i may not have it on video but its very violent and you cant steer! the steering shakes so bad that you can barely hang onto it and i think all the tires quit turning because you literally are bouncing down the highway. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 31300 miles. Vehicle Identification Number (VIN):3D7UT2CL9AG. Dodge Ram 2500 2010 problem was reported in SEGUIN, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 75 mph.

Dodge Ram 2500 2010 Suspension

Dodge Ram 2500 2010 Suspension Review #10470240

DODGE RAM 2500 2010 car safety problem was reported on Aug 08, 2012.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with SUSPENSION . i was on the highway doing around 75 and hit a small bump and all 4 tires locked up, the steering wheel and column shook violently, the dashboard and everything shook really hard. i started to hit the brakes and did not let go of the steering wheel even if it was shaking hard. my truck started to go onto the shoulder then went into the grass on the right and came to a stop. it was still running and i got out to look at the tires and underneath but nothing was wrong. i took it to a different dealer and told them i experienced this before and not to try to duplicate the complaint because it will go out of control. today they called me to say they replaced the ball joint (under warranty) but i have to pay for an alignment. i told them that i looked the symptoms up on the internet and saw this is a real problem that cant be fixed and i don't want this to happen to me again, they can keep it. why do i have to pay 700.00/month payments and also pay with my life or someone else's life too? i will not pick this 'fixed' truck up from the dealer. on the internet and you-tube its called, the death wobble and is what happened to me, only worse and twice! so, today i went to nhtsa and filed both complaints. believe me, i may not have it on video but its very violent and you cant steer! the steering shakes so bad that you can barely hang onto it and i think all the tires quit turning because you literally are bouncing down the highway. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 31300 miles. Vehicle Identification Number (VIN):3D7UT2CL9AG. Dodge Ram 2500 2010 problem was reported in SEGUIN, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 75 mph.

Dodge Ram 2500 2010 Wheels

Dodge Ram 2500 2010 Wheels Review #10470240

DODGE RAM 2500 2010 car safety problem was reported on Aug 08, 2012.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with WHEELS . i was on the highway doing around 75 and hit a small bump and all 4 tires locked up, the steering wheel and column shook violently, the dashboard and everything shook really hard. i started to hit the brakes and did not let go of the steering wheel even if it was shaking hard. my truck started to go onto the shoulder then went into the grass on the right and came to a stop. it was still running and i got out to look at the tires and underneath but nothing was wrong. i took it to a different dealer and told them i experienced this before and not to try to duplicate the complaint because it will go out of control. today they called me to say they replaced the ball joint (under warranty) but i have to pay for an alignment. i told them that i looked the symptoms up on the internet and saw this is a real problem that cant be fixed and i don't want this to happen to me again, they can keep it. why do i have to pay 700.00/month payments and also pay with my life or someone else's life too? i will not pick this 'fixed' truck up from the dealer. on the internet and you-tube its called, the death wobble and is what happened to me, only worse and twice! so, today i went to nhtsa and filed both complaints. believe me, i may not have it on video but its very violent and you cant steer! the steering shakes so bad that you can barely hang onto it and i think all the tires quit turning because you literally are bouncing down the highway. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 31300 miles. Vehicle Identification Number (VIN):3D7UT2CL9AG. Dodge Ram 2500 2010 problem was reported in SEGUIN, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 75 mph.

Dodge Ram 2500 2010 Tires

Dodge Ram 2500 2010 Tires Review #10472054

DODGE RAM 2500 2010 car safety problem was reported on Aug 23, 2012.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with TIRES . tl* the contact owns a 2010 dodge ram 2500 equipped with bf goodrich tires, size: 265/70/r17. the contact stated that he noticed that there were cracks in all four tires. the vehicle was not taken to a dealer for inspection. the vehicle was not repaired. the manufacturer was not notified. the failure mileage was 24,000. .Mileage was 24000 miles. Vehicle Identification Number (VIN):3D7LT2EL9AG. Dodge Ram 2500 2010 problem was reported in STOUGHNTON, MA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Structure

Dodge Ram 2500 2010 Structure Review #10472865

DODGE RAM 2500 2010 car safety problem was reported on Aug 24, 2012.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with STRUCTURE . front left tie rod was a safety recall in march. i had it looked at and the dealer said it was fine. on friday august 24th i was turning around in a driveway after i got off the highway 10 minutes prior when the tie rod broke. i called roadside assistance in which they towed to the nearest dealer since we were 58 miles from home. the dealer gave me a rental car and told me not to worry about anything, chrysler would handle it. on saturday the 25th, the dealership called me and told me that i would have to use my extended warranty because chrysler said they would not pay for this, even though this was a recalled part. i would have to pay the 100.00 deductible. i then filed a complaint with chrysler, who then called me on monday the 27th and told me they would pay the deductible and i would have to issue the check first and they would send me the check. i did not have 100.00 and told them that they would need to pay upfront. they said they would talk to the dealer and take care of it. on tuesday, the 28th i go to pick up my truck and they said chrysler did not pay and i had to borrow 100 to take care of the deductible and also had to fill up the rental car. i feel that this was all on chrysler and i have been a dodge owner since early 90's and i refuse to buy dodge ever again because of their lack of customer service. i could of been killed if this was to happen on the highway and chrysler just does not care. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 69851 miles. Vehicle Identification Number (VIN):3D7UT2HL1AG. Dodge Ram 2500 2010 problem was reported in GILLETT, WI. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 5 mph.

Dodge Ram 2500 2010 Steering

Dodge Ram 2500 2010 Steering Review #10472865

DODGE RAM 2500 2010 car safety problem was reported on Aug 24, 2012.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . front left tie rod was a safety recall in march. i had it looked at and the dealer said it was fine. on friday august 24th i was turning around in a driveway after i got off the highway 10 minutes prior when the tie rod broke. i called roadside assistance in which they towed to the nearest dealer since we were 58 miles from home. the dealer gave me a rental car and told me not to worry about anything, chrysler would handle it. on saturday the 25th, the dealership called me and told me that i would have to use my extended warranty because chrysler said they would not pay for this, even though this was a recalled part. i would have to pay the 100.00 deductible. i then filed a complaint with chrysler, who then called me on monday the 27th and told me they would pay the deductible and i would have to issue the check first and they would send me the check. i did not have 100.00 and told them that they would need to pay upfront. they said they would talk to the dealer and take care of it. on tuesday, the 28th i go to pick up my truck and they said chrysler did not pay and i had to borrow 100 to take care of the deductible and also had to fill up the rental car. i feel that this was all on chrysler and i have been a dodge owner since early 90's and i refuse to buy dodge ever again because of their lack of customer service. i could of been killed if this was to happen on the highway and chrysler just does not care. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 69851 miles. Vehicle Identification Number (VIN):3D7UT2HL1AG. Dodge Ram 2500 2010 problem was reported in GILLETT, WI. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 5 mph.

Dodge Ram 2500 2010 Suspension

Dodge Ram 2500 2010 Suspension Review #10475787

DODGE RAM 2500 2010 car safety problem was reported on Sept 15, 2012.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with SUSPENSION . i was traveling on the interstate at 70 mph hit a small bump and the front end started shaking violently,the steering wheel was almost uncontrollable. i had to pull off and stop before it would stop. then proceeding on didn't have anymore problems yet. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 23160 miles. Vehicle Identification Number (VIN):3D7TT2CT4BG. Dodge Ram 2500 2010 problem was reported in LAFAYETTE, IN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 70 mph.

Dodge Ram 2500 2010 Steering

Dodge Ram 2500 2010 Steering Review #10475787

DODGE RAM 2500 2010 car safety problem was reported on Sept 15, 2012.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . i was traveling on the interstate at 70 mph hit a small bump and the front end started shaking violently,the steering wheel was almost uncontrollable. i had to pull off and stop before it would stop. then proceeding on didn't have anymore problems yet. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 23160 miles. Vehicle Identification Number (VIN):3D7TT2CT4BG. Dodge Ram 2500 2010 problem was reported in LAFAYETTE, IN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 70 mph.

Dodge Ram 2500 2010 Fuel/propulsion System

Dodge Ram 2500 2010 Fuel/propulsion System Review #10477141

DODGE RAM 2500 2010 car safety problem was reported on Mar 01, 2012.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with FUEL/PROPULSION SYSTEM . tl* the contact owns a 2010 dodge ram 2500. the contact stated that while driving at various speeds fuel fumes were emitted into the vehicle. the vehicle was taken to the dealer who was unable to diagnose the failure. the manufacturer was not made aware of the failure. the vehicle was not repaired. the failure mileage was 5,000 and the current mileage was 28,000. .0 person(s) were injured. 0 person(s) died.Mileage was 5000 miles. Vehicle Identification Number (VIN):3D7UT2CL9AG. Dodge Ram 2500 2010 problem was reported in BONIFAY, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering

Dodge Ram 2500 2010 Steering Review #10481601

DODGE RAM 2500 2010 car safety problem was reported on Aug 27, 2012.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . after tie rod end replacement on dodge ram trucks (chrysler recall l16) alignment needs to be checked. recall notice l16 does not require chrysler to check alignment, and one dealership in gresham oregon does not check causing an unsafe condition if alignment is out..Mileage was 29367 miles. Vehicle Identification Number (VIN):3D7UT2HL9AG. Dodge Ram 2500 2010 problem was reported in TROUTDALE, OR. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2010 Engine

Dodge Ram 2500 2010 Engine Review #10482016

DODGE RAM 2500 2010 car safety problem was reported on Oct 21, 2012.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with ENGINE . was driving under cruise control at 75mph on i95 north in the middle lane, and noticed my truck started slowing down and engine had stalled. power steering and power brakes went out and there was traffic coming up behind me in all three lanes, so i had difficulty steering the truck off to the side of the road. all electronics remained on, key was still in on position, and there were no status indicators anywhere on the instrument panel or evic to indicate there was a problem. the fuel gauge was still over half full. once the truck came to a stop, i put it back in park and turned the key off. i was then able to start the truck back up and continue driving the rest of the way home without another incident. i took the truck into the dealer the next day and they were unable to find any fault codes from the ecu. because there were no fault codes found, the dealer was unable or unwilling to perform any repairs to prevent this dangerous condition from re-occurring. so, i've done some research of my own on this condition and found that chrysler has had identical problems in other vehicle models for which they issued a recall (re: nhtsa campaign id number: 11v139000). it seems this problem is caused by a loss of communication between the key fob and the wireless ignition node (win). this wireless connection is required to start the vehicle, but for a glitch in the wireless connection to result in a complete engine shutdown while traveling at high speed is a huge safety issue. i am now afraid to drive my truck on the highway unless i stay in the right hand lane. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 20124 miles. Vehicle Identification Number (VIN):3D7TP2CL6AG. Dodge Ram 2500 2010 problem was reported in PONTE VEDRA BEACH, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 75 mph.

Dodge Ram 2500 2010 Electrical System Ignition

Dodge Ram 2500 2010 Electrical System Ignition Review #10482016

DODGE RAM 2500 2010 car safety problem was reported on Oct 21, 2012.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with ELECTRICAL SYSTEM:IGNITION . was driving under cruise control at 75mph on i95 north in the middle lane, and noticed my truck started slowing down and engine had stalled. power steering and power brakes went out and there was traffic coming up behind me in all three lanes, so i had difficulty steering the truck off to the side of the road. all electronics remained on, key was still in on position, and there were no status indicators anywhere on the instrument panel or evic to indicate there was a problem. the fuel gauge was still over half full. once the truck came to a stop, i put it back in park and turned the key off. i was then able to start the truck back up and continue driving the rest of the way home without another incident. i took the truck into the dealer the next day and they were unable to find any fault codes from the ecu. because there were no fault codes found, the dealer was unable or unwilling to perform any repairs to prevent this dangerous condition from re-occurring. so, i've done some research of my own on this condition and found that chrysler has had identical problems in other vehicle models for which they issued a recall (re: nhtsa campaign id number: 11v139000). it seems this problem is caused by a loss of communication between the key fob and the wireless ignition node (win). this wireless connection is required to start the vehicle, but for a glitch in the wireless connection to result in a complete engine shutdown while traveling at high speed is a huge safety issue. i am now afraid to drive my truck on the highway unless i stay in the right hand lane. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 20124 miles. Vehicle Identification Number (VIN):3D7TP2CL6AG. Dodge Ram 2500 2010 problem was reported in PONTE VEDRA BEACH, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 75 mph.

Dodge Ram 2500 2010 Steering

Dodge Ram 2500 2010 Steering Review #10482016

DODGE RAM 2500 2010 car safety problem was reported on Oct 21, 2012.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . was driving under cruise control at 75mph on i95 north in the middle lane, and noticed my truck started slowing down and engine had stalled. power steering and power brakes went out and there was traffic coming up behind me in all three lanes, so i had difficulty steering the truck off to the side of the road. all electronics remained on, key was still in on position, and there were no status indicators anywhere on the instrument panel or evic to indicate there was a problem. the fuel gauge was still over half full. once the truck came to a stop, i put it back in park and turned the key off. i was then able to start the truck back up and continue driving the rest of the way home without another incident. i took the truck into the dealer the next day and they were unable to find any fault codes from the ecu. because there were no fault codes found, the dealer was unable or unwilling to perform any repairs to prevent this dangerous condition from re-occurring. so, i've done some research of my own on this condition and found that chrysler has had identical problems in other vehicle models for which they issued a recall (re: nhtsa campaign id number: 11v139000). it seems this problem is caused by a loss of communication between the key fob and the wireless ignition node (win). this wireless connection is required to start the vehicle, but for a glitch in the wireless connection to result in a complete engine shutdown while traveling at high speed is a huge safety issue. i am now afraid to drive my truck on the highway unless i stay in the right hand lane. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 20124 miles. Vehicle Identification Number (VIN):3D7TP2CL6AG. Dodge Ram 2500 2010 problem was reported in PONTE VEDRA BEACH, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 75 mph.

Dodge Ram 2500 2010 Service Brakes

Dodge Ram 2500 2010 Service Brakes Review #10482016

DODGE RAM 2500 2010 car safety problem was reported on Oct 21, 2012.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with SERVICE BRAKES . was driving under cruise control at 75mph on i95 north in the middle lane, and noticed my truck started slowing down and engine had stalled. power steering and power brakes went out and there was traffic coming up behind me in all three lanes, so i had difficulty steering the truck off to the side of the road. all electronics remained on, key was still in on position, and there were no status indicators anywhere on the instrument panel or evic to indicate there was a problem. the fuel gauge was still over half full. once the truck came to a stop, i put it back in park and turned the key off. i was then able to start the truck back up and continue driving the rest of the way home without another incident. i took the truck into the dealer the next day and they were unable to find any fault codes from the ecu. because there were no fault codes found, the dealer was unable or unwilling to perform any repairs to prevent this dangerous condition from re-occurring. so, i've done some research of my own on this condition and found that chrysler has had identical problems in other vehicle models for which they issued a recall (re: nhtsa campaign id number: 11v139000). it seems this problem is caused by a loss of communication between the key fob and the wireless ignition node (win). this wireless connection is required to start the vehicle, but for a glitch in the wireless connection to result in a complete engine shutdown while traveling at high speed is a huge safety issue. i am now afraid to drive my truck on the highway unless i stay in the right hand lane. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 20124 miles. Vehicle Identification Number (VIN):3D7TP2CL6AG. Dodge Ram 2500 2010 problem was reported in PONTE VEDRA BEACH, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 75 mph.

Dodge Ram 2500 2010 Engine

Dodge Ram 2500 2010 Engine Review #10482752

DODGE RAM 2500 2010 car safety problem was reported on Oct 01, 2010.DODGE RAM 2500 2010, manufactured by CHRYSLER GROUP LLC had a problem with ENGINE . tl* the contact owns a 2010 dodge ram 2500. the contact stated that the check engine warning light illuminated and the vehicle could not be started. the vehicle was towed to the dealer for diagnosis. the contact was told that the key module needed to be replaced and the negative battery terminal had become loose. the vehicle was not repaired. the vehicle was taken to a different dealer and the contact was then informed that the oxygen sensor needed to be replaced. the vehicle was repaired however, the failure recurred. the vehicle was taken back to a dealer and the contact was informed that the failure could not be diagnosed. the vehicle was not repaired. the failure mileage was 3,000 and the current mileage was 9,859. .0 person(s) were injured. 0 person(s) died.Mileage was 3000 miles. Vehicle Identification Number (VIN):3D7UT2CL6AG. Dodge Ram 2500 2010 problem was reported in FAYETTE CITY, PA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Power Train Driveline Differential Unit

Dodge Ram 2500 2010 Power Train Driveline Differential Unit Review #10484462

DODGE RAM 2500 2010 car safety problem was reported on Nov 12, 2012.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with POWER TRAIN:DRIVELINE:DIFFERENTIAL UNIT . rear pinion nut loosening caused complete differential failure. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 72000 miles. Vehicle Identification Number (VIN):1D7RV1CT8AS. Dodge Ram 2500 2010 problem was reported in NORTH CALDWELL, NJ. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. Dodge Ram 2500 2010 drive type:4WD. FUEL TYPE: GAS. VEHICLE SPEED: 75 mph.

Dodge Ram 2500 2010 Steering Linkages Tie Rod Assembly

Dodge Ram 2500 2010 Steering Linkages Tie Rod Assembly Review #10493747

DODGE RAM 2500 2010 car safety problem was reported on Jan 21, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING:LINKAGES:TIE ROD ASSEMBLY . 2010 dodge ram 2500 tie rod broke on truck on 1/21/2013. heard popping noise in the front end of truck - pulled over to investigate. drivers side - inner tie rod. *tr.Dodge Ram 2500 2010 problem was reported in DAMASCUS, AR. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Suspension

Dodge Ram 2500 2010 Suspension Review #10497817

DODGE RAM 2500 2010 car safety problem was reported on Feb 02, 2011.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with SUSPENSION . i was driving my normal route home on i-65. just before my exit, there is an overpass on i-65 you must go over. the expansion joint is diagonal to the interstate. i have gone over this joint thousands of times before,in my other vehicle. driving my new truck, i went over the joint and the truck jumped to the right. it scared me but i assumed it was because i wasn't accustomed to driving the new vehicle. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 5600 miles. Vehicle Identification Number (VIN):3D7TT2CT3AG. Dodge Ram 2500 2010 problem was reported in WEST LAFAYETTE, IN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 70 mph.

Dodge Ram 2500 2010 Steering

Dodge Ram 2500 2010 Steering Review #10497817

DODGE RAM 2500 2010 car safety problem was reported on Feb 02, 2011.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . i was driving my normal route home on i-65. just before my exit, there is an overpass on i-65 you must go over. the expansion joint is diagonal to the interstate. i have gone over this joint thousands of times before,in my other vehicle. driving my new truck, i went over the joint and the truck jumped to the right. it scared me but i assumed it was because i wasn't accustomed to driving the new vehicle. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 5600 miles. Vehicle Identification Number (VIN):3D7TT2CT3AG. Dodge Ram 2500 2010 problem was reported in WEST LAFAYETTE, IN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 70 mph.

Dodge Ram 2500 2010 Wheels

Dodge Ram 2500 2010 Wheels Review #10497817

DODGE RAM 2500 2010 car safety problem was reported on Feb 02, 2011.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with WHEELS . i was driving my normal route home on i-65. just before my exit, there is an overpass on i-65 you must go over. the expansion joint is diagonal to the interstate. i have gone over this joint thousands of times before,in my other vehicle. driving my new truck, i went over the joint and the truck jumped to the right. it scared me but i assumed it was because i wasn't accustomed to driving the new vehicle. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 5600 miles. Vehicle Identification Number (VIN):3D7TT2CT3AG. Dodge Ram 2500 2010 problem was reported in WEST LAFAYETTE, IN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 70 mph.

Dodge Ram 2500 2010 Suspension

Dodge Ram 2500 2010 Suspension Review #10497818

DODGE RAM 2500 2010 car safety problem was reported on Oct 20, 2012.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with SUSPENSION . i was driving with my son in the vehicle getting on i-65 going sb. i crossed over an expansion and the truck starting violently jumping and vibrating. it threw me far enough that i was almost in the grass. once i applied the brakes, the truck slid completely into the grass. the vibrating continued until i was almost completely stopped (approx 10 mph). i new immediately something was wrong with this particular truck. i took the truck to my local dodge dealer and explained what had happened. the invoice reads "customer the front end wobbles bad from 65 mph down to 10 mph, after hitting a bump". "replaced front brake calipers and hoses. add fluid". i did not believe this was the problem so i began researching to see if anyone had experienced the same issue. turns out many other dodge trucks have experienced this issue. so much so that it has been given the name "the death wobble". in my research i have found numerous fixes for this problem but they are all after market parts. i continued to drive my truck hoping the problem was resolved. i have driven the same route many times without issue and i assumed the problem was resolved. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 24980 miles. Vehicle Identification Number (VIN):3D7TT2CT3AG. Dodge Ram 2500 2010 problem was reported in WEST LAFAYETTE, IN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 65 mph.

Dodge Ram 2500 2010 Wheels

Dodge Ram 2500 2010 Wheels Review #10497818

DODGE RAM 2500 2010 car safety problem was reported on Oct 20, 2012.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with WHEELS . i was driving with my son in the vehicle getting on i-65 going sb. i crossed over an expansion and the truck starting violently jumping and vibrating. it threw me far enough that i was almost in the grass. once i applied the brakes, the truck slid completely into the grass. the vibrating continued until i was almost completely stopped (approx 10 mph). i new immediately something was wrong with this particular truck. i took the truck to my local dodge dealer and explained what had happened. the invoice reads "customer the front end wobbles bad from 65 mph down to 10 mph, after hitting a bump". "replaced front brake calipers and hoses. add fluid". i did not believe this was the problem so i began researching to see if anyone had experienced the same issue. turns out many other dodge trucks have experienced this issue. so much so that it has been given the name "the death wobble". in my research i have found numerous fixes for this problem but they are all after market parts. i continued to drive my truck hoping the problem was resolved. i have driven the same route many times without issue and i assumed the problem was resolved. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 24980 miles. Vehicle Identification Number (VIN):3D7TT2CT3AG. Dodge Ram 2500 2010 problem was reported in WEST LAFAYETTE, IN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 65 mph.

Dodge Ram 2500 2010 Steering

Dodge Ram 2500 2010 Steering Review #10497818

DODGE RAM 2500 2010 car safety problem was reported on Oct 20, 2012.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . i was driving with my son in the vehicle getting on i-65 going sb. i crossed over an expansion and the truck starting violently jumping and vibrating. it threw me far enough that i was almost in the grass. once i applied the brakes, the truck slid completely into the grass. the vibrating continued until i was almost completely stopped (approx 10 mph). i new immediately something was wrong with this particular truck. i took the truck to my local dodge dealer and explained what had happened. the invoice reads "customer the front end wobbles bad from 65 mph down to 10 mph, after hitting a bump". "replaced front brake calipers and hoses. add fluid". i did not believe this was the problem so i began researching to see if anyone had experienced the same issue. turns out many other dodge trucks have experienced this issue. so much so that it has been given the name "the death wobble". in my research i have found numerous fixes for this problem but they are all after market parts. i continued to drive my truck hoping the problem was resolved. i have driven the same route many times without issue and i assumed the problem was resolved. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 24980 miles. Vehicle Identification Number (VIN):3D7TT2CT3AG. Dodge Ram 2500 2010 problem was reported in WEST LAFAYETTE, IN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 65 mph.

Dodge Ram 2500 2010 Suspension

Dodge Ram 2500 2010 Suspension Review #10497819

DODGE RAM 2500 2010 car safety problem was reported on Feb 01, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with SUSPENSION . i was driving in my truck with my wife on sr 25 in a construction zone. i was hauling my 13 ft detro trailer. approximate speed was 55 mph. we went around a bend in the road where the pavement changed levels. the truck jumped and began violently vibrating. the vibrating continued until i slowed down to approx 10 mph. the problem i thought was fixed a.k.a. the death wobble has returned. i called my local dodge dealership with skepticism. the dealer owner stated they could not fix the problem unless they were able to duplicate the problem. he was doubtful they would be able to duplicate it. the owner called his district manager who stated he has never heard of this problem (but the owner said he has). the owner suggested i begin video taping while driving. i have been video taping each time i enter the interstate so i can "catch" the death wobble on video. at this point, i do not feel safe in the vehicle and do not want my family riding in the truck. i have escaped accident to this point because there weren't any vehicles around me at the time the death wobble occurred. this is my 3rd posting. please help. what should i do? *tr.0 person(s) were injured. 0 person(s) died.Mileage was 28150 miles. Vehicle Identification Number (VIN):3D7TT2CT3AG. Dodge Ram 2500 2010 problem was reported in WEST LAFAYETTE, IN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 55 mph.

Dodge Ram 2500 2010 Wheels

Dodge Ram 2500 2010 Wheels Review #10497819

DODGE RAM 2500 2010 car safety problem was reported on Feb 01, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with WHEELS . i was driving in my truck with my wife on sr 25 in a construction zone. i was hauling my 13 ft detro trailer. approximate speed was 55 mph. we went around a bend in the road where the pavement changed levels. the truck jumped and began violently vibrating. the vibrating continued until i slowed down to approx 10 mph. the problem i thought was fixed a.k.a. the death wobble has returned. i called my local dodge dealership with skepticism. the dealer owner stated they could not fix the problem unless they were able to duplicate the problem. he was doubtful they would be able to duplicate it. the owner called his district manager who stated he has never heard of this problem (but the owner said he has). the owner suggested i begin video taping while driving. i have been video taping each time i enter the interstate so i can "catch" the death wobble on video. at this point, i do not feel safe in the vehicle and do not want my family riding in the truck. i have escaped accident to this point because there weren't any vehicles around me at the time the death wobble occurred. this is my 3rd posting. please help. what should i do? *tr.0 person(s) were injured. 0 person(s) died.Mileage was 28150 miles. Vehicle Identification Number (VIN):3D7TT2CT3AG. Dodge Ram 2500 2010 problem was reported in WEST LAFAYETTE, IN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 55 mph.

Dodge Ram 2500 2010 Steering

Dodge Ram 2500 2010 Steering Review #10497819

DODGE RAM 2500 2010 car safety problem was reported on Feb 01, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . i was driving in my truck with my wife on sr 25 in a construction zone. i was hauling my 13 ft detro trailer. approximate speed was 55 mph. we went around a bend in the road where the pavement changed levels. the truck jumped and began violently vibrating. the vibrating continued until i slowed down to approx 10 mph. the problem i thought was fixed a.k.a. the death wobble has returned. i called my local dodge dealership with skepticism. the dealer owner stated they could not fix the problem unless they were able to duplicate the problem. he was doubtful they would be able to duplicate it. the owner called his district manager who stated he has never heard of this problem (but the owner said he has). the owner suggested i begin video taping while driving. i have been video taping each time i enter the interstate so i can "catch" the death wobble on video. at this point, i do not feel safe in the vehicle and do not want my family riding in the truck. i have escaped accident to this point because there weren't any vehicles around me at the time the death wobble occurred. this is my 3rd posting. please help. what should i do? *tr.0 person(s) were injured. 0 person(s) died.Mileage was 28150 miles. Vehicle Identification Number (VIN):3D7TT2CT3AG. Dodge Ram 2500 2010 problem was reported in WEST LAFAYETTE, IN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 55 mph.

Dodge Ram 2500 2010 Power Train

Dodge Ram 2500 2010 Power Train Review #10498379

DODGE RAM 2500 2010 car safety problem was reported on July 05, 2010.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with POWER TRAIN . when the vehicle is put in reverse or drive from the park position at idle the truck will pull through the brakes. this has happened in excess of 24 times between 7500 miles and 24000 miles. the truck has been looked at by the dealership with no improvemant. they were unable to duplicate the problem. there are no indicators before it happens. i believe the problem is in the transmission valve causing the t/c to be in the locked position as the transmission shifts. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 7500 miles. Vehicle Identification Number (VIN):3D7UT2CL1AG. Dodge Ram 2500 2010 problem was reported in IDAHO SPRINGS, CO. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2010 Tires

Dodge Ram 2500 2010 Tires Review #10500983

DODGE RAM 2500 2010 car safety problem was reported on Feb 26, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with TIRES . tl* the contact owns a 2010 dodge ram 2500 equipped with michelin ltxa/f tires, size: 265/70/r17. the contact stated that all four tires were cracked. the vehicle was taken to the dealer however, the technician refused to provide any assistance. the manufacturer was not made aware of the failure. the tires were not replaced. the failure mileage was 9,000. .Mileage was 9000 miles. Vehicle Identification Number (VIN):3D7TP2CL2AG. Dodge Ram 2500 2010 problem was reported in LOVINGTON, NM. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering

Dodge Ram 2500 2010 Steering Review #10505831

DODGE RAM 2500 2010 car safety problem was reported on Apr 05, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . there was already a recall out for this left tie rod end. i had it replaced by dodge on march 30, 2012. last week i had the new replaced left tie rod end, break on me. fortunately i was in a parking lot and not driving down the street or there would have been a wreck. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 40600 miles. Vehicle Identification Number (VIN):3D7UT2CL1AG. Dodge Ram 2500 2010 problem was reported in JONESBORO, AR. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 3 mph.

Dodge Ram 2500 2010 Steering Review #10511446

DODGE RAM 2500 2010 car safety problem was reported on Apr 05, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . this is a complaint about recall iiv350000. dealership inspected tie rod end unbeknownst to me about recall in 2012. the tie rod broke in april 2013. chrysler stated they fulfilled the recall requirement with the inspection. the failure occurred after the inspection. this seems hardly acceptable as a failure can result after a visual inspection, unless some type of non-destructive testing was complete. chrysler charged my extended warranty for the deductible for the repair. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 41000 miles. Vehicle Identification Number (VIN):3D7UT2CL6AG. Dodge Ram 2500 2010 problem was reported in VALDEZ, AK. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 1 mph.

Dodge Ram 2500 2010 Steering Review #10514116

DODGE RAM 2500 2010 car safety problem was reported on Feb 21, 2012.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500 hd. the contact stated that while driving approximately 10 mph, he heard a loud noise outside the vehicle. the contact moved to the side of the roadway and noticed that the front driver's side tie rod was fractured. the vehicle was towed to an authorized dealer where the tie rod was replaced. the vehicle was repaired for the same defect in 2012. the manufacturer was notified of the problem. the approximate failure mileage was 32,145. .0 person(s) were injured. 0 person(s) died.Mileage was 32145 miles. Vehicle Identification Number (VIN):3D7UT2CL4AG. Dodge Ram 2500 2010 problem was reported in CELINA, TN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 10 mph.

Dodge Ram 2500 2010 Steering Review #10521465

DODGE RAM 2500 2010 car safety problem was reported on June 19, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . popping noise when applying pressure to brake peddle. loss of power steering causing me to run off road this happened twice on my way to work. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 48198 miles. Vehicle Identification Number (VIN):3D7UT2CL0AG. Dodge Ram 2500 2010 problem was reported in SNELLING, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 35 mph.

Dodge Ram 2500 2010 Electrical System

Dodge Ram 2500 2010 Electrical System Review #10522837

DODGE RAM 2500 2010 car safety problem was reported on June 18, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with ELECTRICAL SYSTEM . from statement of operator "while performing road maintenance activities i was driving up a grade at low speed while in four wheel drive and in low gear. the first indication of a problem was a sudden burst of smoke from under the hood accompanied by the engine oil light coming on. i tripped the hood release, went to the front of the vehicle to open the hood. the smoke from the engine compartment prevented me from safely locating the hood release. i then retrieved the fire extinguisher from the vehicle and applied it the best i could to the engine compartment. at the same time another employee retrieved an additional 2 fire extinguishers from another forest service truck and applied their contents in a similar fashion. the application was insufficient to extinguish the fire. over the subsequent half hour to 45 minutes the vehicle became fully engulfed in fire. the second operator said when he seen the smoke he ran up to the front side of the truck and could see flames in the engine compartment and at that time they tried to extinguish the fire using 3 5abc fire extinguishers. after depleting the extinguishers they moved back and unhooked the rock rake they were pulling and waited for the fire response to arrive at which time the vehicle was totally engulfed. *tr.Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Mileage was 38000 miles. Vehicle Identification Number (VIN):3D7TT2CT4AG. Dodge Ram 2500 2010 problem was reported in LEAVENWORTH, WA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 2 mph.

Dodge Ram 2500 2010 Engine

Dodge Ram 2500 2010 Engine Review #10522837

DODGE RAM 2500 2010 car safety problem was reported on June 18, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with ENGINE . from statement of operator "while performing road maintenance activities i was driving up a grade at low speed while in four wheel drive and in low gear. the first indication of a problem was a sudden burst of smoke from under the hood accompanied by the engine oil light coming on. i tripped the hood release, went to the front of the vehicle to open the hood. the smoke from the engine compartment prevented me from safely locating the hood release. i then retrieved the fire extinguisher from the vehicle and applied it the best i could to the engine compartment. at the same time another employee retrieved an additional 2 fire extinguishers from another forest service truck and applied their contents in a similar fashion. the application was insufficient to extinguish the fire. over the subsequent half hour to 45 minutes the vehicle became fully engulfed in fire. the second operator said when he seen the smoke he ran up to the front side of the truck and could see flames in the engine compartment and at that time they tried to extinguish the fire using 3 5abc fire extinguishers. after depleting the extinguishers they moved back and unhooked the rock rake they were pulling and waited for the fire response to arrive at which time the vehicle was totally engulfed. *tr.Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Mileage was 38000 miles. Vehicle Identification Number (VIN):3D7TT2CT4AG. Dodge Ram 2500 2010 problem was reported in LEAVENWORTH, WA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 2 mph.

Dodge Ram 2500 2010 Structure Body

Dodge Ram 2500 2010 Structure Body Review #10522837

DODGE RAM 2500 2010 car safety problem was reported on June 18, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STRUCTURE:BODY . from statement of operator "while performing road maintenance activities i was driving up a grade at low speed while in four wheel drive and in low gear. the first indication of a problem was a sudden burst of smoke from under the hood accompanied by the engine oil light coming on. i tripped the hood release, went to the front of the vehicle to open the hood. the smoke from the engine compartment prevented me from safely locating the hood release. i then retrieved the fire extinguisher from the vehicle and applied it the best i could to the engine compartment. at the same time another employee retrieved an additional 2 fire extinguishers from another forest service truck and applied their contents in a similar fashion. the application was insufficient to extinguish the fire. over the subsequent half hour to 45 minutes the vehicle became fully engulfed in fire. the second operator said when he seen the smoke he ran up to the front side of the truck and could see flames in the engine compartment and at that time they tried to extinguish the fire using 3 5abc fire extinguishers. after depleting the extinguishers they moved back and unhooked the rock rake they were pulling and waited for the fire response to arrive at which time the vehicle was totally engulfed. *tr.Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Mileage was 38000 miles. Vehicle Identification Number (VIN):3D7TT2CT4AG. Dodge Ram 2500 2010 problem was reported in LEAVENWORTH, WA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 2 mph.

Dodge Ram 2500 2010 Engine

Dodge Ram 2500 2010 Engine Review #10531493

DODGE RAM 2500 2010 car safety problem was reported on July 10, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with ENGINE . tl* the contact owns a 2010 dodge ram 2500. the contact stated that the vehicle failed to start. the vehicle was not repaired and the manufacturer was notified. the approximate failure mileage was 136,000..0 person(s) were injured. 0 person(s) died.Mileage was 136000 miles. Vehicle Identification Number (VIN):3D7UT28L3AG. Dodge Ram 2500 2010 problem was reported in PASCO, WA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Suspension

Dodge Ram 2500 2010 Suspension Review #10532409

DODGE RAM 2500 2010 car safety problem was reported on July 20, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with SUSPENSION . tl* the contact owns a 2010 dodge ram 1500. the contact stated that while driving 55 mph, the contact notice a loud grinding noise from the front of the vehicle. the vehicle was taken to the dealer for diagnosis where it was stated that the ball joints needed to be repaired. the vehicle was not repaired and the manufacturer was notified. the approximate failure mileage was 55,000. .0 person(s) were injured. 0 person(s) died.Mileage was 55000 miles. Vehicle Identification Number (VIN):1D7RB1GP7AS. Dodge Ram 2500 2010 problem was reported in LA GRIANGE, NC. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 55 mph.

Dodge Ram 2500 2010 Steering

Dodge Ram 2500 2010 Steering Review #10532637

DODGE RAM 2500 2010 car safety problem was reported on July 27, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . i was driving in my truck with my friend on sr 101. approximate speed was 60 mph. we went around a bend in the road over a concrete bridge expansion joint where the pavement changed levels. the truck jumped and began violently vibrating and forced me into passenger side guard rail of the bridge. the vibrating continued until i slowed down to approx 10 mph. the problem i thought was fixed with new steering stabilizer and shocks, a.k.a. the death wobble has returned. after research on the internet, i called my local dodge dealership with skepticism. he knew of no recalls and it would not be covered under warranty. i do not feel safe in the vehicle and do not want my family riding in the truck. i have escaped injury to this point. this is my 1st posting. please help. what should i do? *tr.Vehicle was involved in a crash. 0 person(s) were injured. 0 person(s) died.Mileage was 42063 miles. Vehicle Identification Number (VIN):3D7UT2CLXAG. Dodge Ram 2500 2010 problem was reported in NAPA, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 7 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 60 mph.

Dodge Ram 2500 2010 Suspension

Dodge Ram 2500 2010 Suspension Review #10532637

DODGE RAM 2500 2010 car safety problem was reported on July 27, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with SUSPENSION . i was driving in my truck with my friend on sr 101. approximate speed was 60 mph. we went around a bend in the road over a concrete bridge expansion joint where the pavement changed levels. the truck jumped and began violently vibrating and forced me into passenger side guard rail of the bridge. the vibrating continued until i slowed down to approx 10 mph. the problem i thought was fixed with new steering stabilizer and shocks, a.k.a. the death wobble has returned. after research on the internet, i called my local dodge dealership with skepticism. he knew of no recalls and it would not be covered under warranty. i do not feel safe in the vehicle and do not want my family riding in the truck. i have escaped injury to this point. this is my 1st posting. please help. what should i do? *tr.Vehicle was involved in a crash. 0 person(s) were injured. 0 person(s) died.Mileage was 42063 miles. Vehicle Identification Number (VIN):3D7UT2CLXAG. Dodge Ram 2500 2010 problem was reported in NAPA, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 7 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 60 mph.

Dodge Ram 2500 2010 Structure Body

Dodge Ram 2500 2010 Structure Body Review #10532637

DODGE RAM 2500 2010 car safety problem was reported on July 27, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STRUCTURE:BODY . i was driving in my truck with my friend on sr 101. approximate speed was 60 mph. we went around a bend in the road over a concrete bridge expansion joint where the pavement changed levels. the truck jumped and began violently vibrating and forced me into passenger side guard rail of the bridge. the vibrating continued until i slowed down to approx 10 mph. the problem i thought was fixed with new steering stabilizer and shocks, a.k.a. the death wobble has returned. after research on the internet, i called my local dodge dealership with skepticism. he knew of no recalls and it would not be covered under warranty. i do not feel safe in the vehicle and do not want my family riding in the truck. i have escaped injury to this point. this is my 1st posting. please help. what should i do? *tr.Vehicle was involved in a crash. 0 person(s) were injured. 0 person(s) died.Mileage was 42063 miles. Vehicle Identification Number (VIN):3D7UT2CLXAG. Dodge Ram 2500 2010 problem was reported in NAPA, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 7 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 60 mph.

Dodge Ram 2500 2010 Suspension

Dodge Ram 2500 2010 Suspension Review #10536702

DODGE RAM 2500 2010 car safety problem was reported on Aug 21, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with SUSPENSION . traveling 60 mph on a two lane county road in a rural area, speed limit 55mph. drove over a slight bump in the road that was over a small creek when the steering wheel suddenly and violently started to wobble back and forth and the vehicle started to shake violently as well. the vehicle was uncontrollable and started to force me off the road toward a wooded area.luckily i was able to slow down enough for the "death wobble" to subside enough for me to regain control. i was on my way to perform a chore and had to return from this chore on the same road. the exact same thing happened on the return trip. violent shaking of the steering wheel and vehicle and total loss of control. the same thing happened about two months ago on an interstate highway. the road surface was poorly maintained and the "death wobble" occurred when i drove over an imperfection on the road surface. luckily no other vehicles were next to me or an accident surely would have occurred. this first event i thought was just by chance, but after the last event happening twice on the same day has me convinced that there is a flaw in the steering and/or suspension. i went to the dealer where i bought the truck after doing a web search on problems with this vehicle (many complaints posted detailing exactly what had occurred with me) and told the service rep what had happened and she said she had heard no such complaints from others. the roads in my county are very rural and well maintained. no problems on well maintained roads, however, on poorly maintained roads or over expansion joints or potholes going 60 mph will throw this vehicle into a "death wobble" as it has been called. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 15976 miles. Vehicle Identification Number (VIN):3D7UT2CL1AG. Dodge Ram 2500 2010 problem was reported in POCOMOKE, MD. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 60 mph.

Dodge Ram 2500 2010 Steering

Dodge Ram 2500 2010 Steering Review #10536702

DODGE RAM 2500 2010 car safety problem was reported on Aug 21, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . traveling 60 mph on a two lane county road in a rural area, speed limit 55mph. drove over a slight bump in the road that was over a small creek when the steering wheel suddenly and violently started to wobble back and forth and the vehicle started to shake violently as well. the vehicle was uncontrollable and started to force me off the road toward a wooded area.luckily i was able to slow down enough for the "death wobble" to subside enough for me to regain control. i was on my way to perform a chore and had to return from this chore on the same road. the exact same thing happened on the return trip. violent shaking of the steering wheel and vehicle and total loss of control. the same thing happened about two months ago on an interstate highway. the road surface was poorly maintained and the "death wobble" occurred when i drove over an imperfection on the road surface. luckily no other vehicles were next to me or an accident surely would have occurred. this first event i thought was just by chance, but after the last event happening twice on the same day has me convinced that there is a flaw in the steering and/or suspension. i went to the dealer where i bought the truck after doing a web search on problems with this vehicle (many complaints posted detailing exactly what had occurred with me) and told the service rep what had happened and she said she had heard no such complaints from others. the roads in my county are very rural and well maintained. no problems on well maintained roads, however, on poorly maintained roads or over expansion joints or potholes going 60 mph will throw this vehicle into a "death wobble" as it has been called. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 15976 miles. Vehicle Identification Number (VIN):3D7UT2CL1AG. Dodge Ram 2500 2010 problem was reported in POCOMOKE, MD. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 60 mph.

Dodge Ram 2500 2010 Suspension

Dodge Ram 2500 2010 Suspension Review #10537133

DODGE RAM 2500 2010 car safety problem was reported on Aug 25, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with SUSPENSION . driving on the baltime beltway (695) after driving over a couple of bumps in the road my steering wheel started to shake violently out of control and the truck was shaking and bouncing all over the road like a jumping jack. other cars that were around me at the time were getting out of my proximity as i was all over the road and had to slow down to almost a stop. i actually ended up on the shoulder of the road when it was all over. this highway is 55 mph and usually congested. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 16200 miles. Vehicle Identification Number (VIN):3D7UT2CL1AG. Dodge Ram 2500 2010 problem was reported in POCOMOKE, MD. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 60 mph.

Dodge Ram 2500 2010 Steering

Dodge Ram 2500 2010 Steering Review #10537133

DODGE RAM 2500 2010 car safety problem was reported on Aug 25, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . driving on the baltime beltway (695) after driving over a couple of bumps in the road my steering wheel started to shake violently out of control and the truck was shaking and bouncing all over the road like a jumping jack. other cars that were around me at the time were getting out of my proximity as i was all over the road and had to slow down to almost a stop. i actually ended up on the shoulder of the road when it was all over. this highway is 55 mph and usually congested. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 16200 miles. Vehicle Identification Number (VIN):3D7UT2CL1AG. Dodge Ram 2500 2010 problem was reported in POCOMOKE, MD. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 60 mph.

Dodge Ram 2500 2010 Suspension

Dodge Ram 2500 2010 Suspension Review #10537135

DODGE RAM 2500 2010 car safety problem was reported on Aug 25, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with SUSPENSION . on my way to york, pa a second "death wobble" occurred. this time on i 83. speed limit is 65 mph. i drove over a couple of bumps in the road and my steering wheel was shaking violently as well as the truck bouncing all over the road like a jumping jack. an 18 wheeler was behind me at the time and almost rear-ended me as a result. i had to slow down to almost nothing to get it to stop and was forced into the shoulder. this is the time this happened to me today and the fourth time in one week! there is a serious problem with this truck as i have seen numerous complaints online about this exact same thing occurring to this vehicle. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 16250 miles. Vehicle Identification Number (VIN):3D7UT2CL1AG. Dodge Ram 2500 2010 problem was reported in POCOMOKE, MD. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 65 mph.

Dodge Ram 2500 2010 Steering

Dodge Ram 2500 2010 Steering Review #10537135

DODGE RAM 2500 2010 car safety problem was reported on Aug 25, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . on my way to york, pa a second "death wobble" occurred. this time on i 83. speed limit is 65 mph. i drove over a couple of bumps in the road and my steering wheel was shaking violently as well as the truck bouncing all over the road like a jumping jack. an 18 wheeler was behind me at the time and almost rear-ended me as a result. i had to slow down to almost nothing to get it to stop and was forced into the shoulder. this is the time this happened to me today and the fourth time in one week! there is a serious problem with this truck as i have seen numerous complaints online about this exact same thing occurring to this vehicle. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 16250 miles. Vehicle Identification Number (VIN):3D7UT2CL1AG. Dodge Ram 2500 2010 problem was reported in POCOMOKE, MD. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 65 mph.

Dodge Ram 2500 2010 Steering Review #10554979

DODGE RAM 2500 2010 car safety problem was reported on Nov 11, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact stated that while driving 65 mph, the steering wheel began to shake violently. the vehicle was taken to the dealer for inspection where they stated that the sway bar needed to be replaced. the vehicle was repaired. the manufacturer was notified of the failure. the failure mileage was 98,000. the vin was unavailable. .0 person(s) were injured. 0 person(s) died.Mileage was 98000 miles. Dodge Ram 2500 2010 problem was reported in PONTOTOC, MS. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 65 mph.

Dodge Ram 2500 2010 Steering Review #10558609

DODGE RAM 2500 2010 car safety problem was reported on Jan 06, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact stated that nhtsa campaign id number:13v529000 (steering) had exceeded a reasonable time for repair. the contact received the recall notification in november of 2013. the manufacturer was contact and stated that the parts for the recall were not expected to arrive until april 2013. the contact had not experienced a failure. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7TT2HT2AG. Dodge Ram 2500 2010 problem was reported in IDAHO FALLS, ID. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Engine

Dodge Ram 2500 2010 Engine Review #10558640

DODGE RAM 2500 2010 car safety problem was reported on Nov 28, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with ENGINE . tl* the contact owns a 2010 dodge ram 2500. the contact stated that while parked, he noticed an abnormal noise from the front end of the vehicle. the vehicle was taken to the dealer for diagnosis where the technician stated that the hvac recirculation door actuator would need to be replaced. there was a manufacturer's recall for the failure. the manufacturer was made aware of the failure and stated that the vin was not included in the recall. the vehicle was not repaired. the approximate failure mileage was 50,000. .0 person(s) were injured. 0 person(s) died.Mileage was 50000 miles. Vehicle Identification Number (VIN):3D7UT2CL6AG. Dodge Ram 2500 2010 problem was reported in CARLSBAD, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2010 Steering

Dodge Ram 2500 2010 Steering Review #10558803

DODGE RAM 2500 2010 car safety problem was reported on Dec 31, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact received notification of nhtsa campaign number: 13v529000 (steering) and the part needed to repair the vehicle was unavailable. the dealer informed the contact that they only receive one part a week from the manufacturer. the dealer was unable to provide an expected date for the part to be available. the manufacturer was not notified of the problem. there are no failures at this time. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2CL6AG. Dodge Ram 2500 2010 problem was reported in RECLUSE, WY. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10559751

DODGE RAM 2500 2010 car safety problem was reported on Dec 23, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . making a sharp left turn after stop heard grinding noise from front then when going into curve left tie rod failed causing one wheel to turn and the other not causing the truck to shake violently and to go off the road. this was a recall done in december 2012 by westbury jeep. they would not warranty this . total cost for new rim ,new tire, tie rod, labor, and tow $1600. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 55000 miles. Vehicle Identification Number (VIN):3D7TT2CT0AG. Dodge Ram 2500 2010 problem was reported in GLEN COVE, NY. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 30 mph.

Dodge Ram 2500 2010 Steering Review #10559766

DODGE RAM 2500 2010 car safety problem was reported on Jan 13, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . i received a recall n49/nhtsa 13v-529 late last year stating that on january 6 i could contact my dealer for a replacement of the left tire rod ball stud, because it may fracture and cause loss of directional control. i attempted to contact the dealer "whites energy motors" gillette, wy on january 6, and they stated that they couldn't help me until january 15th. i contacted "whites energy motors" again on january 13th to schedule and oil change, at that time i asked about the recall, and if i could get that scheduled as well. they stated that "they could take a look at the vehicle to see if it required the recall repair but it would be quite a ways out, because "they would only allow us to order one part per week". if this is a safety issue, who and why can this dealer only order one part per week? this area has many, many ram trucks of all sizes in the model year that meets the recall. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 30061 miles. Vehicle Identification Number (VIN):3D7UT2HL3AG. Dodge Ram 2500 2010 problem was reported in GILLETTE, WY. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL.

Dodge Ram 2500 2010 Steering Review #10559770

DODGE RAM 2500 2010 car safety problem was reported on Jan 08, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact received a recall notice for nhtsa campaign number: 13v529000 (steering) and contacted the dealer, who stated that the remedy part would not become available until april. the manufacturer was not made aware of the problem. the contact had not experienced a failure. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2CL2AG. Dodge Ram 2500 2010 problem was reported in PIERRE, SD. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10560332

DODGE RAM 2500 2010 car safety problem was reported on Jan 05, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact stated that nhtsa campaign id number:13v529000 (steering) had exceeded a reasonable time for repair. the manufacturer advised the contact that he would have to schedule an appointment and they could not guarantee when the repair would be completed. the contact had not experienced a failure. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7LT2EL8AG. Dodge Ram 2500 2010 problem was reported in WESTMINSTER, MA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10560350

DODGE RAM 2500 2010 car safety problem was reported on Jan 01, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact stated that nhtsa campaign number: 13v529000 (steering) has surpassed a reasonable time for repair. the dealer stated the part was not available for repair. the manufacture was not notified. the contact had not experienced a failure. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2CL4AG. Dodge Ram 2500 2010 problem was reported in SUNSET, LA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10560991

DODGE RAM 2500 2010 car safety problem was reported on Dec 18, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact received a notification of nhtsa campaign number: 13v529000 (steering) and stated that the part needed to repair the vehicle was unavailable. the dealer was unable to provide an expected date for the part to become available. the manufacturer informed the contact that the remedy part will not be available in one year. the contact had not experienced a failure. *tr.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7LT2EL3AG. Dodge Ram 2500 2010 problem was reported in OAKDALE, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL.

Dodge Ram 2500 2010 Steering Review #10561757

DODGE RAM 2500 2010 car safety problem was reported on Jan 08, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact stated that there was a recall under nhtsa campaign id number 13v529000 (steering) and the contact was unable to have the vehicle serviced because the part was unavailable to perform the repair. the dealer informed the contact that the remedy part was being issued as one per week by the manufacturer. the manufacturer was notified of the problem. the contact had not experienced a failure. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2CL5AG. Dodge Ram 2500 2010 problem was reported in NEWBURGH, IN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10562123

DODGE RAM 2500 2010 car safety problem was reported on Jan 07, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact received notification of nhtsa campaign number: 13v529000 (steering) and stated that the part needed to repair the vehicle was unavailable. the dealer was unable to provide an expected date for the part to become available. the manufacturer had not been made aware of the problem. the contact had not experienced a failure.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT28LXAG. Dodge Ram 2500 2010 problem was reported in CODY, WY. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10563066

DODGE RAM 2500 2010 car safety problem was reported on Feb 03, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . 2010 dodge ram 2500. consumer writes in regards to replacement parts for tie rod ball stud recall notice. *smd the consumer stated chrysler was only sending one part per week, per dealership, with a waiting list of 90 people. the consumer stated it would be 2 years before, the recall was fixed. .Vehicle Identification Number (VIN):3D73Y3CL9AG. Dodge Ram 2500 2010 problem was reported in LONGVIEW, WA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Dodge Ram 2500 2010 drive type:4WD. FUEL SYSTEM:Turbo. FUEL TYPE: DIESEL. DEALER'S NAME: MCCORD DODGE . DEALER'S CITY: LONOGVIEW . DEALER'S STATE CODE: WA.

Dodge Ram 2500 2010 Steering Review #10563225

DODGE RAM 2500 2010 car safety problem was reported on Feb 06, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact received notification of nhtsa campaign number: 13v529000 (steering). the contact attempted to have the recall remedied but was informed that the part was unavailable. the manufacturer was made aware of the failure. there are no failures at this time. .0 person(s) were injured. 0 person(s) died.Mileage was 70000 miles. Vehicle Identification Number (VIN):3D7KS28T99G. Dodge Ram 2500 2010 problem was reported in CROSBY, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2010 Steering Review #10563759

DODGE RAM 2500 2010 car safety problem was reported on Jan 17, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . wife first experienced when taking daughter to doctor and the whole truck wobbled violently said was possible it small bump on a left turn going about 45-50 mph today 2/10/13 was on way home and was doing about 50 or so and on left hand turn hit slight bump and whole truck started violently shaking called dealer today and told the issue and asked if this was a common problem and they said not that they have heard of and did some quick research just now and found that it's possible dodge death wobble and i feel if i had my three daughters in truck they would have been frightened and luckily i was i good control otherwise i probably wouldn't be sending this now thanks for listening hope dodge makes this better from forums read on doesn't seem like they want or care about the issue. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 35000 miles. Vehicle Identification Number (VIN):3D7UT2HL2AG. Dodge Ram 2500 2010 problem was reported in MIDLAND, VA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 45 mph.

Dodge Ram 2500 2010 Suspension

Dodge Ram 2500 2010 Suspension Review #10563759

DODGE RAM 2500 2010 car safety problem was reported on Jan 17, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with SUSPENSION . wife first experienced when taking daughter to doctor and the whole truck wobbled violently said was possible it small bump on a left turn going about 45-50 mph today 2/10/13 was on way home and was doing about 50 or so and on left hand turn hit slight bump and whole truck started violently shaking called dealer today and told the issue and asked if this was a common problem and they said not that they have heard of and did some quick research just now and found that it's possible dodge death wobble and i feel if i had my three daughters in truck they would have been frightened and luckily i was i good control otherwise i probably wouldn't be sending this now thanks for listening hope dodge makes this better from forums read on doesn't seem like they want or care about the issue. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 35000 miles. Vehicle Identification Number (VIN):3D7UT2HL2AG. Dodge Ram 2500 2010 problem was reported in MIDLAND, VA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 45 mph.

Dodge Ram 2500 2010 Steering

Dodge Ram 2500 2010 Steering Review #10564043

DODGE RAM 2500 2010 car safety problem was reported on Feb 05, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact received notification of nhtsa campaign id number: 13v529000 (steering) and contacted the dealer. the dealer advised the contact that the parts needed to complete the recall repair would not become available for another three months. the contact was added to a waiting list with eleven vehicles ahead of her also awaiting the same recall repair. the manufacturer was made aware of the problem. the contact had not experienced a failure. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2CL6AG. Dodge Ram 2500 2010 problem was reported in LAKE PARK, GA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Engine

Dodge Ram 2500 2010 Engine Review #10564146

DODGE RAM 2500 2010 car safety problem was reported on Feb 12, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with ENGINE . upon purchasing this used pickup i performed an inspection of the under carriage i noticed that the oil pan had a pretty significant dent in it. it was obviously caused by a skid plate that was mounted on the front axle of this truck from the factory. i went online and found many owner of this model had the same issue. one person was successful in getting a dealership to remove the skid plate and replace the oil pan. the service department said that the skid plate was only meant to be put on the gasoline models not the diesel models. this is due to not having enough clearance. this can cause a hole in the oil pan which can easily lead to an expensive but needless engine failure. this is unacceptable on a truck that cost $50000, dodge should perform these repairs and skid plate removal for these models for no cost. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 87000 miles. Vehicle Identification Number (VIN):3D7UT2CL3AG. Dodge Ram 2500 2010 problem was reported in LAKE JACKSON, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2010 Steering

Dodge Ram 2500 2010 Steering Review #10566190

DODGE RAM 2500 2010 car safety problem was reported on Jan 10, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . i purchased a new dodge ram 2500 truck in 2010. i received an "important" safety recall on jan. 10, 2014 #n49/nhtsa 13v-529 for my vehicle vin [xxx]. it states the left tie rod ball stud may fracture under certain driving conditions causing a loss of directional control and/or crash without warning. i phoned fowler auto dodge trucks in lakeport, ca 707-263-0500 on jan. 20, 2014 to order the parts and/or make an appointment. john advised me it will take some time but he will call when it gets in. today is february 26 and nothing has come in. according to john, the parts are being released slowly as they don't have enough. he stated they are probably 2-4 months out until they get them. i asked for chrysler head office number 1-800-992-1977 a representative stated this has been a common complaint from customers this past week. advised me they should be available to dealers in "about" two weeks. i am concerned for my safety as well as others in my family when i receive an "important" safety recall like this. why do a recall if parts can't be supplied to rectify this problem before you send out the notices? can you help me? [xxx] information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6). *tr.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7TT2CTXAG. Dodge Ram 2500 2010 problem was reported in UKIAH, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. FUEL TYPE: GAS.

Dodge Ram 2500 2010 Steering Review #10567548

DODGE RAM 2500 2010 car safety problem was reported on Mar 06, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . in january of 2014, chrysler issued a recall for dodge ram trucks. the issue is the tie rod may fracture, which could cause loss of control. the replacement part for this recall is unavailable until august 2014. this is an unreasonable amount of time to operate a vehicle with a possible safety issue. as a work truck which is used to carry and tow heavy loads, i feel it is unsafe to use it with this issue. *tr.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2CL2AG. Dodge Ram 2500 2010 problem was reported in SAN JOSE, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL.

Dodge Ram 2500 2010 Steering Review #10568484

DODGE RAM 2500 2010 car safety problem was reported on Dec 16, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact received a recall notification related to nhtsa campaign id number 13v529000(steering) however, the part needed was unavailable to perform the repair. the manufacture was not notified. the contact had not experienced a failure. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7TT2CT5AG. Dodge Ram 2500 2010 problem was reported in LEMARS, OH. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10568473

DODGE RAM 2500 2010 car safety problem was reported on Dec 01, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . 2010 dodge ram 2500. consumer writes in regards to left tie rod recall notice issues. *smd the consumer called the dealer in december 2013, about the recall, and was placed on a waiting list. the consumer called the dealer, in march 2014 and was informed they only received 2 tie rod ends since the release of the campaign and there was no eta for additional parts. *jb.Vehicle Identification Number (VIN):3D7UT2CL1AG. Dodge Ram 2500 2010 problem was reported in LEXINGTON, SC. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Dodge Ram 2500 2010 drive type:4WD. FUEL SYSTEM:Turbo. FUEL TYPE: DIESEL.

Dodge Ram 2500 2010 Steering Review #10568460

DODGE RAM 2500 2010 car safety problem was reported on Mar 03, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . 2010 dodge ram. consumer writes in regards to left tie rod recall notice problems. *smd the consumer was informed, the part had not been manufactured yet. .Vehicle Identification Number (VIN):3D7UT2CL9AG. Dodge Ram 2500 2010 problem was reported in LAUREL, MT. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Dodge Ram 2500 2010 drive type:4WD. FUEL SYSTEM:Turbo. FUEL TYPE: DIESEL. DEALER'S NAME: LITHIA DODGE . DEALER'S TELEPHONE NUMBER: 999-652-2200 . DEALER'S CITY: BILLINGS . DEALER'S STATE CODE: MT.

Dodge Ram 2500 2010 Steering Review #10568952

DODGE RAM 2500 2010 car safety problem was reported on Dec 27, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . this vehicle has been recalled for tie rod end malfunction, notification n49. the left tie rod end can simple break in half without warning, a very dangerous situation. i have contacted 2 dealerships for service on this recall; addys dodge in myrtle beach on december 27 2013, and burglund dodge roanoke va march 10 2014. i have been put on waiting lists waiting for the parts at both dealerships,. note i have been waiting for nearly 3 months since i 1st contacted addy dodge. addy dodge told me it would be a very long wait, that there are only 1 or 2 sets of parts available each week. note that i have not had an accident, the tie rod end has not broken. and this is not a complaint against the dealerships, the complaint is against dodge for not having the parts available. i, as many other people, am currently driving the truck with the defect because parts are not available to fix the recall. what good is a recall if there are no parts to fix the recall? *tr.0 person(s) were injured. 0 person(s) died.Mileage was 9107 miles. Vehicle Identification Number (VIN):3D7LT2ET0AG. Dodge Ram 2500 2010 problem was reported in WIRTZ, VA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2010 Steering Review #10569379

DODGE RAM 2500 2010 car safety problem was reported on Mar 12, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact stated that while driving 3 mph, he heard a loud noise as the vehicle came to a complete stop. the contact mentioned that after inspecting the vehicle he noticed that the tie rod was fractured and became jammed against the front driver's side tire. the vehicle was towed to the dealer where the technician verified the failure and stated that the tie rod needed to be replaced. the manufacturer was made aware of the failure. the vehicle was not repaired. the vin was not available. the failure and current mileage was 84,000. .0 person(s) were injured. 0 person(s) died.Mileage was 84000 miles. Dodge Ram 2500 2010 problem was reported in DOROTHY, NJ. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 3 mph.

Dodge Ram 2500 2010 Steering Review #10573344

DODGE RAM 2500 2010 car safety problem was reported on Mar 05, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact received a recall notification of nhtsa campaign id number 13v529000 (steering) and stated the part needed to perform the repair was unavailable. the dealer was unable to provide an expected date for the part. the manufacturer was not made aware of the problem. the contact had not experienced a failure. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7TT2CT7AG. Dodge Ram 2500 2010 problem was reported in CHESTER, NY. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10573358

DODGE RAM 2500 2010 car safety problem was reported on Dec 12, 2012.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact received a recall notification of nhtsa campaign id number 13v529000 (steering) however, the contact was not able to have the vehicle serviced because the part was unavailable. the dealer advised that the vehicle not be driven. the manufacturer was made aware of the problem. the contact had not experienced a failure..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2CL4AG. Dodge Ram 2500 2010 problem was reported in ATHENS, OH. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10573572

DODGE RAM 2500 2010 car safety problem was reported on Dec 20, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact received notification of nhtsa campaign id number: 13v529000 (steering) and stated that the parts were still not available. the dealer did not give a specific date when the parts would become available. the manufacturer was also contacted and could not provide an estimated date for when the vehicle would receive the recall repairs. the contact was experiencing a loud noise coming from the front drivers side of the vehicle more than once. there the failure mileage was unavailable. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2CL6AG. Dodge Ram 2500 2010 problem was reported in MERIDIAN, MS. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10574014

DODGE RAM 2500 2010 car safety problem was reported on Mar 21, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact stated in december 2013, she received recall nhtsa campaign number: 13v529000 (steering). the contact stated she attempted to have the vehicle serviced on numerous occasions, but the parts were unavailable. the vehicle was not repaired. the manufacturer was notified. the contact had not experience the failure. the vin and failure mileage were not available. updated 05/12/2014*lj.0 person(s) were injured. 0 person(s) died.Dodge Ram 2500 2010 problem was reported in KALAMA, WA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10574725

DODGE RAM 2500 2010 car safety problem was reported on Dec 18, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact received notification of nhtsa campaign id number:13v529000 (steering) and stated that the parts were not available. the dealer did not give a specific date when the parts would become available. the manufacturer was also contacted and could not provide an estimated date for when the vehicle would receive the recall repairs. the contact had not experienced a failure. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2CL4AG. Dodge Ram 2500 2010 problem was reported in SPOKANE, WA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10574927

DODGE RAM 2500 2010 car safety problem was reported on Mar 24, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . recall n49/ nhtsa 13v-529 took to dealer for recall and they told me that my truck has bad parts need to be replaced , then told me that it would be 2-3 months before they can get the parts to fix truck , filed a complaint with dodge and still waiting for the call to fix truck , i do not feel safe driving it mt steering is not working correctly and the just said drive it or dont thats all we can say . *tr.0 person(s) were injured. 0 person(s) died.Mileage was 38000 miles. Vehicle Identification Number (VIN):3D7UT2CL1AG. Dodge Ram 2500 2010 problem was reported in WEST CHESTER, OH. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL.

Dodge Ram 2500 2010 Steering Review #10575192

DODGE RAM 2500 2010 car safety problem was reported on Mar 27, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact stated that he received notification of nhtsa campaign number 13v529000 (steering) and was informed by the manufacturer that the parts were not available. the contact had not experienced a failure. the vin was not available. .0 person(s) were injured. 0 person(s) died.Dodge Ram 2500 2010 problem was reported in GALLIPOLIS, OH. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10575204

DODGE RAM 2500 2010 car safety problem was reported on Dec 01, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact stated that nhtsa campaign number: 13v529000(steering) had exceeded a reasonable time for repair. the contact received the recall letter december 2013. the dealer advised that the repair kit was received once per week and they would contact him when the part became available. the contact had not experience a failure. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2CL1AG. Dodge Ram 2500 2010 problem was reported in KANSAS CITY, MO. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10575324

DODGE RAM 2500 2010 car safety problem was reported on Dec 30, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact received recall notification nhtsa campaign id number 13v529000 (steering); however, the contact was unable to have the vehicle serviced under the recall because the part needed was unavailable. the dealer stated that one remedy part per week was being sent to service the vehicles. the manufacturer was notified of the problem. there are no failures at this time. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7TT2CT4AG. Dodge Ram 2500 2010 problem was reported in NORFOLK, VA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10575328

DODGE RAM 2500 2010 car safety problem was reported on Jan 07, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact received recall notification nhtsa campaign id number of 13v529000 (steering) and stated that the part needed to perform the repair was unavailable. the manufacturer was not notified of the problem. there are no failures at this time. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7TT2HT7AG. Dodge Ram 2500 2010 problem was reported in STERLING, CO. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10575819

DODGE RAM 2500 2010 car safety problem was reported on Jan 30, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact stated that he received recall nhtsa campaign number: 13v529000 (steering) in january. the contact attempted to get the vehicle repaired on numerous occasions but the parts were unavailable. the vehicle was not repaired. the manufacturer was notified. there are no failures at this time. the vin was unavailable. updated 5/19/14*cn.0 person(s) were injured. 0 person(s) died.Dodge Ram 2500 2010 problem was reported in BANDERA, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10575871

DODGE RAM 2500 2010 car safety problem was reported on Jan 07, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact stated that she attempted to have the vehicle repaired under nhtsa campaign number: 11v350000. the contact stated that she was made aware that parts were not available as a result repairs were unable to be performed for the recall. the contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repairs. the contact had not experienced a failure. updated 06/17/14 ma.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2HL7AG. Dodge Ram 2500 2010 problem was reported in CHAMBERLIN, SD. Vehicle was purchased on Aug 01, 2012. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Dodge Ram 2500 2010 drive type:4WD. FUEL SYSTEM:Turbo. FUEL TYPE: DIESEL.

Dodge Ram 2500 2010 Steering Review #10576846

DODGE RAM 2500 2010 car safety problem was reported on Jan 01, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . i am very concerned that chrysler has issued a recall for the left tie rod and state in the recall that the tie rod could fracture and cause a loss of directional control and crash without warning, but the parts for the recall are not available. we have been on a waiting list for 3 months at this time. i think this should be reviewed, it should not require people to die in a crash before something is done. how can a company know this problem exists and it could result in fatality but it appears to be no big deal that we have to wait for a repair part to become available. *tr.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2CL8AG. Dodge Ram 2500 2010 problem was reported in HARRISON, AR. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL.

Dodge Ram 2500 2010 Steering Review #10577191

DODGE RAM 2500 2010 car safety problem was reported on Apr 03, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact stated that he attempted to have his vehicle repaired under nhtsa campaign number: 13v529000 (steering) but was informed that the parts were not available and that the dealers were receiving one part per week. the contact stated that since the failure was reported in november of 2013, there should be a remedy available before april of 2014. the contact stated that the manufacturer had exceeded a reasonable time for repair. there are no failures at this time..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2CL8AG. Dodge Ram 2500 2010 problem was reported in WAVERLY, VA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10577226

DODGE RAM 2500 2010 car safety problem was reported on Mar 18, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact received notification of nhtsa campaign id number:13v529000 (steering) but was advised by the dealer that the parts needed to complete the repair were not available. the contact received the notice months ago. the manufacturer was also contacted and could not provide an estimated date for when the vehicle would receive the recall repairs. the contact had not experienced a failure. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7TT2CT7AG. Dodge Ram 2500 2010 problem was reported in OAKLAND, IA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10577848

DODGE RAM 2500 2010 car safety problem was reported on Nov 14, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact stated that he attempted to have the vehicle repaired under nhtsa campaign number:13v529000. the contact stated that he was made aware that the parts were not available and as a result the recall repairs were not performed. the contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repairs. there are no failures at this time..0 person(s) were injured. 0 person(s) died.Mileage was 22000 miles. Vehicle Identification Number (VIN):3D7UT2CL7AG. Dodge Ram 2500 2010 problem was reported in MULBERRYGROVE, IL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10578154

DODGE RAM 2500 2010 car safety problem was reported on Jan 12, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact received a recall notification of nhtsa campaign id number 13v529000 (steering) and stated that the part needed was unavailable to perform the repair on the vehicle. the dealer informed the remedy part was in the processing of being redesigned. the manufacturer was not notified of the problem. the contact had not experienced a failure. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2CL0AG. Dodge Ram 2500 2010 problem was reported in REYNOLDSBURG, OH. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10578336

DODGE RAM 2500 2010 car safety problem was reported on Feb 24, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . three times i've lost control of this truck at relatively low speeds and normal driving conditions. the truck would go into a right skid and fishtail. twice the road was dry, once the road was wet. each time i was able to recover before hitting something or exiting the roadway however i used both lanes of traffic to recover. twice i lost control while accelerating normally after slowing for a curve or other situation. i had slowed to about 40 and was accelerating back to the speed limit of 60. incident occurred at about 50. loss of control came suddenly like the front of the vehicle took a sharp bid to the left on its own. once was after hitting some washboard type bumps in the road which caused the backend to bounce to the right and begin to skid. i inspected and don't see anything obviously loose or broken. possible related issues: a slight bump is often felt in the steering wheel and accelerator pedal. truck is under recall n49 for a tie rod issue. but i don't see any sign that the tie rod is loose although the u-bolts that hold the damper to the tie rod may be slipping. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 90000 miles. Vehicle Identification Number (VIN):3D7TT2CT4AG. Dodge Ram 2500 2010 problem was reported in SEGUIN, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 50 mph.

Dodge Ram 2500 2010 Suspension

Dodge Ram 2500 2010 Suspension Review #10578336

DODGE RAM 2500 2010 car safety problem was reported on Feb 24, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with SUSPENSION . three times i've lost control of this truck at relatively low speeds and normal driving conditions. the truck would go into a right skid and fishtail. twice the road was dry, once the road was wet. each time i was able to recover before hitting something or exiting the roadway however i used both lanes of traffic to recover. twice i lost control while accelerating normally after slowing for a curve or other situation. i had slowed to about 40 and was accelerating back to the speed limit of 60. incident occurred at about 50. loss of control came suddenly like the front of the vehicle took a sharp bid to the left on its own. once was after hitting some washboard type bumps in the road which caused the backend to bounce to the right and begin to skid. i inspected and don't see anything obviously loose or broken. possible related issues: a slight bump is often felt in the steering wheel and accelerator pedal. truck is under recall n49 for a tie rod issue. but i don't see any sign that the tie rod is loose although the u-bolts that hold the damper to the tie rod may be slipping. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 90000 miles. Vehicle Identification Number (VIN):3D7TT2CT4AG. Dodge Ram 2500 2010 problem was reported in SEGUIN, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 50 mph.

Dodge Ram 2500 2010 Steering

Dodge Ram 2500 2010 Steering Review #10578356

DODGE RAM 2500 2010 car safety problem was reported on Jan 01, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact received notification of nhtsa campaign id number 13v529000 (steering) however, the contact was unable to have the vehicle repaired because the part needed was unavailable. the manufacturer was not notified of the problem. the contact had not experienced a failure. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2CL8AG. Dodge Ram 2500 2010 problem was reported in MT. VERNON, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10579146

DODGE RAM 2500 2010 car safety problem was reported on Jan 13, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact received a recall notification related to nhtsa campaign id number 13v529000(steering) but the part needed was unavailable to perform the repair. the manufacturer was notified. the approximate current mileage was 180,000. the contact had not experienced a failure..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2CL1AG. Dodge Ram 2500 2010 problem was reported in GRESHAN, OR. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10585116

DODGE RAM 2500 2010 car safety problem was reported on Apr 26, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . i am extremely concerned about the recall on the left tie rod ball stud on this truck. we received the recall notice the last week in december 2013. however, it stated to call our dodge dealer starting january 6th! this recall could cause a loss of directional control and/or crash without warning. when we called the dealer, they couldn't even fix the recall because they didn't have the parts and there was a waiting list! it is the end of april and we are still waiting for this serious recall to be fixed. shame on you chrysler for taking so long. *tr.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2HL2AG. Dodge Ram 2500 2010 problem was reported in BLACK DIAMOND, WA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL.

Dodge Ram 2500 2010 Steering Review #10585250

DODGE RAM 2500 2010 car safety problem was reported on July 01, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact received a notification of nhtsa campaign id number 13v529000 (steering) and stated that the part needed to repair the vehicle was unavailable. the dealer and manufacturer stated that one remedy part would be received every two weeks. the contact had not experienced a failure. updated 06/10/14 ma .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7TT2CT8AG. Dodge Ram 2500 2010 problem was reported in STORM LAKE, IA. Vehicle was purchased on June 01, 2013. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 8 CYLINDERS. Dodge Ram 2500 2010 drive type:4WD. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Dodge Ram 2500 2010 TRANSMISSION TYPE: AUTO.

Dodge Ram 2500 2010 Steering Review #10586192

DODGE RAM 2500 2010 car safety problem was reported on Dec 19, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact stated that he attempted to have the vehicle repaired under nhtsa campaign number:13v529000 (steering) but was made aware that the parts were not available. the repairs were unable to be performed for and the contact stated that the manufacturer had exceeded a reasonable amount of time for the repair. the contact had not experienced a failure. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2CL5AG. Dodge Ram 2500 2010 problem was reported in COLFAX, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10587101

DODGE RAM 2500 2010 car safety problem was reported on Dec 06, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact received notification of nhtsa campaign id number: 13v529000 (steering) but was advised by the dealer that the parts needed to complete the repair were not available. the contact had been waiting months to have the recall service. the manufacturer was also contacted and could not provide a reasonable date for when the vehicle would receive the recall repairs. the contact had not experienced a failure. updated 7/25/14*cn.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2CL9AG. Dodge Ram 2500 2010 problem was reported in WASHINGTON, UT. Original Owner. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Vehicle had 8 CYLINDERS. Dodge Ram 2500 2010 drive type:4WD. FUEL SYSTEM:Turbo. FUEL TYPE: DIESEL. Dodge Ram 2500 2010 TRANSMISSION TYPE: AUTO. DEALER'S NAME: S. WADE DODGE . DEALER'S TELEPHONE NUMBER: 435-634-4200 . DEALER'S CITY: WASHINGTON . DEALER'S STATE CODE: UT. DEALER'S ZIPCODE: 84780 .

Dodge Ram 2500 2010 Suspension

Dodge Ram 2500 2010 Suspension Review #10588398

DODGE RAM 2500 2010 car safety problem was reported on Feb 01, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with SUSPENSION . contacted dealer vehicle perched shepherd team auto plaza, 1819 south main, fort scott kansas 66701 (888-211-6244) weekly since feb. 1, 2014 and they can't provide the service for the recall n49. many excuses even after my persistence. *tr.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7TT2CT6AG. Dodge Ram 2500 2010 problem was reported in ARMA, KS. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. FUEL TYPE: GAS.

Dodge Ram 2500 2010 Steering

Dodge Ram 2500 2010 Steering Review #10592144

DODGE RAM 2500 2010 car safety problem was reported on Dec 20, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . have been waiting for parts to make this repair since put on the list at pro jeep/dodge thornton, colo. (now larry h. miller dodge) on 01/07/2014. i have repeatedly contacted the dealer & chrysler/dodge and am given the run around each time and am no closer to repairs than i was 6 months ago. dodge knew this was a problem since 2008 yet continued to sell these trucks without notifying customers of the problem. was sold an unsafe vehicle. *js.0 person(s) were injured. 0 person(s) died.Mileage was 12000 miles. Vehicle Identification Number (VIN):3D7TT2CT0AG. Dodge Ram 2500 2010 problem was reported in ARVADA, CO. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. Dodge Ram 2500 2010 drive type:4WD. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2010 Steering Review #10592491

DODGE RAM 2500 2010 car safety problem was reported on Mar 04, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact received nhtsa recall campaign number 13v529000 (steering); however, the part was unavailable. the manufacturer was notified of the delay. the contact had not experienced a failure..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2HL9AG. Dodge Ram 2500 2010 problem was reported in HARTDALE, OR. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2010 Steering Review #10592494

DODGE RAM 2500 2010 car safety problem was reported on Dec 11, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact attempted to have the vehicle repaired under nhtsa campaign number 13v529000 (steering). the contact was informed that the parts for the recall remedy were unavailable. the contact stated that the manufacturer had exceeded a reasonable amount of time to perform the recall repair. the vehicle had not experienced a failure. updated 8/19/14*cn.0 person(s) were injured. 0 person(s) died.Mileage was 50000 miles. Vehicle Identification Number (VIN):3D7UT2CL1AG. Dodge Ram 2500 2010 problem was reported in LAKE CITY, CA. Original Owner. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL SYSTEM:Turbo. FUEL TYPE: DIESEL.

Dodge Ram 2500 2010 Engine

Dodge Ram 2500 2010 Engine Review #10594437

DODGE RAM 2500 2010 car safety problem was reported on Mar 15, 2012.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with ENGINE . we purchased a 2010 dodge ram cummings 2500 on 06/20/2011. weeks into making the purchase we started having engine problems. such as a clogged fuel filter, egr valve, the ignition key switch, truck would not start with turn of the key, you had to wiggle key inside ignition to start truck. the check engine light is always on, recently the message panel displayed exhaust is 90% full. the truck was going about 5 miles per hour. and recently it turned off on the way home barely avoiding getting hit by on coming traffic. we also replaced the water pump, the belt tensioner, and it had ac coils clogged. paint also started chipping in some areas. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 100000 miles. Vehicle Identification Number (VIN):3D7TP2CL9AG. Dodge Ram 2500 2010 problem was reported in MCALLEN, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 55 mph.

Dodge Ram 2500 2010 Steering

Dodge Ram 2500 2010 Steering Review #10594437

DODGE RAM 2500 2010 car safety problem was reported on Mar 15, 2012.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . we purchased a 2010 dodge ram cummings 2500 on 06/20/2011. weeks into making the purchase we started having engine problems. such as a clogged fuel filter, egr valve, the ignition key switch, truck would not start with turn of the key, you had to wiggle key inside ignition to start truck. the check engine light is always on, recently the message panel displayed exhaust is 90% full. the truck was going about 5 miles per hour. and recently it turned off on the way home barely avoiding getting hit by on coming traffic. we also replaced the water pump, the belt tensioner, and it had ac coils clogged. paint also started chipping in some areas. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 100000 miles. Vehicle Identification Number (VIN):3D7TP2CL9AG. Dodge Ram 2500 2010 problem was reported in MCALLEN, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 55 mph.

Dodge Ram 2500 2010 Fuel System, Diesel

Dodge Ram 2500 2010 Fuel System, Diesel Review #10594437

DODGE RAM 2500 2010 car safety problem was reported on Mar 15, 2012.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with FUEL SYSTEM, DIESEL . we purchased a 2010 dodge ram cummings 2500 on 06/20/2011. weeks into making the purchase we started having engine problems. such as a clogged fuel filter, egr valve, the ignition key switch, truck would not start with turn of the key, you had to wiggle key inside ignition to start truck. the check engine light is always on, recently the message panel displayed exhaust is 90% full. the truck was going about 5 miles per hour. and recently it turned off on the way home barely avoiding getting hit by on coming traffic. we also replaced the water pump, the belt tensioner, and it had ac coils clogged. paint also started chipping in some areas. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 100000 miles. Vehicle Identification Number (VIN):3D7TP2CL9AG. Dodge Ram 2500 2010 problem was reported in MCALLEN, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 55 mph.

Dodge Ram 2500 2010 Steering

Dodge Ram 2500 2010 Steering Review #10595179

DODGE RAM 2500 2010 car safety problem was reported on Jan 02, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl * the contact owns a 2010 dodge ram 2500. the contact stated that she attempted to have the vehicle repaired under nhtsa campaign id number: 13v529000 (steering). the contact stated that she was made aware that parts were not available as a result repairs were unable to be performed for the recall. the contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repairs. the contact had not experienced any failure. the vin was not available. .0 person(s) were injured. 0 person(s) died.Dodge Ram 2500 2010 problem was reported in CORTEZ, CO. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10595936

DODGE RAM 2500 2010 car safety problem was reported on Dec 30, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . driving up country road at 45 mph in my dodge ram 2500 diesel, with only 40k miles on it. all of a sudden, death wobble hits. no ability to steer and no brakes. right wheel gets jammed into frame of truck at 45mph and can't spin so violent and uncontrollable shaking. evidenced by tire marks on the frame of my truck. have photos. sends me up the side of the road, and almost flips the truck upside down. managed to get truck under control, by slamming on my brakes, in oncoming traffic, my dog hits the windshield. police officer was right behind me and witnessed the entire event, told me i was lucky to be alive. when i called dodge they denied everything. looked up internet and found "death wobble" which is exactly what transpired with the truck. fortunately at the time i was not hauling my horse trailer or all would have been dead. damages to date so far is 8k, including frame, front bumper, front suspension, steering, front axle assembly. this is absolutely outrageous for a truck that only has 40k miles. *tr.Vehicle was involved in a crash. 0 person(s) were injured. 0 person(s) died.Mileage was 40000 miles. Vehicle Identification Number (VIN):3D7UT2CLXAG. Dodge Ram 2500 2010 problem was reported in WAILUKU, HI. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 45 mph.

Dodge Ram 2500 2010 Suspension

Dodge Ram 2500 2010 Suspension Review #10595936

DODGE RAM 2500 2010 car safety problem was reported on Dec 30, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with SUSPENSION . driving up country road at 45 mph in my dodge ram 2500 diesel, with only 40k miles on it. all of a sudden, death wobble hits. no ability to steer and no brakes. right wheel gets jammed into frame of truck at 45mph and can't spin so violent and uncontrollable shaking. evidenced by tire marks on the frame of my truck. have photos. sends me up the side of the road, and almost flips the truck upside down. managed to get truck under control, by slamming on my brakes, in oncoming traffic, my dog hits the windshield. police officer was right behind me and witnessed the entire event, told me i was lucky to be alive. when i called dodge they denied everything. looked up internet and found "death wobble" which is exactly what transpired with the truck. fortunately at the time i was not hauling my horse trailer or all would have been dead. damages to date so far is 8k, including frame, front bumper, front suspension, steering, front axle assembly. this is absolutely outrageous for a truck that only has 40k miles. *tr.Vehicle was involved in a crash. 0 person(s) were injured. 0 person(s) died.Mileage was 40000 miles. Vehicle Identification Number (VIN):3D7UT2CLXAG. Dodge Ram 2500 2010 problem was reported in WAILUKU, HI. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 45 mph.

Dodge Ram 2500 2010 Steering

Dodge Ram 2500 2010 Steering Review #10596234

DODGE RAM 2500 2010 car safety problem was reported on May 20, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . the dodge ram was checked by the dealership that has not been able to supple the recall parts (recall n 49) since the date of recall (december 2013). i called every month for an appointment and only on the last call did the local dealership tell me the first time they could supply the recalled tie rods on may 29. consequently, i took the truck to be inspected by the local dealership for the tie rod problem on 5/14/2014 because, as i told them, i planned to drive 10 hours from santa fe nm (home) to ft collins co pulling a horse trailer with two valuable horses and did not want anything to happen. the tie rod broke as i was backing up to attach the horse trailer for the homeward bound trip. ten minutes later and we would have all been dead. thank goodness the ft collins dealership did have the new tie rods in replacement but i believe the santa fe lithia dealership was much remiss in not obtaining the replacement parts for its local customers and clearing the truck for a long road trip. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 29886 miles. Vehicle Identification Number (VIN):3D7TT2CT8AG. Dodge Ram 2500 2010 problem was reported in SANTA FE, NM. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 5 mph.

Dodge Ram 2500 2010 Steering Review #10605111

DODGE RAM 2500 2010 car safety problem was reported on June 23, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . have recall n49/nhtsa 13v-529 .have had this notice since january 2014 and now have received the second notice. i would like to know why dodge/chrysler is having such a hard time in producing replacement parts for this recall. i contacted 2 dealers while in florida (jan-april2014) and my local dealer when i returned. same answer no parts available. we are retired and travel with a 5th wheel trailer, any info would be appreciated. *tr.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2CL8AG. Dodge Ram 2500 2010 problem was reported in CLINTON, MI. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL.

Dodge Ram 2500 2010 Steering Review #10605329

DODGE RAM 2500 2010 car safety problem was reported on Feb 10, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . i have received 2 notices of recall and taken the truck to the dealer, but parts are not available for this recall n49 / nhtsa13v-529. i have called chrysler and they have said parts are not available or severely limited and rationed. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 86000 miles. Vehicle Identification Number (VIN):3D7UT2CL8AG. Dodge Ram 2500 2010 problem was reported in CLINTON TWP., MI. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2010 Unknown Or Other

Dodge Ram 2500 2010 Unknown Or Other Review #10605735

DODGE RAM 2500 2010 car safety problem was reported on June 23, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with UNKNOWN OR OTHER . in march 2014 we received a recall notice for our dodge ram 2500. we took the letter to our local dodge dealer, marshall motors, in salina, ks to verify that our vehicle needed the repair work indicated. the employee said it did and that she would keep our notification letter and a phone number and call us when the part came in to schedule an appointment. we've waited and waited and i called again on june 23, 2014 and was told that the part/parts needed were still on back order from chrysler and they would call us when they received them to schedule an appointment. i find this ridiculous as it has been 3 months since we received the first notice of recall. if there is indeed something that needs fixed on our vehicle we feel it needs to be taken care of for the safety of our family. what happens if this part does cause an accident while we're waiting for the back ordered part? concerned and frustrated. thank you. *tr.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2CL1AG. Dodge Ram 2500 2010 problem was reported in BENNINGTON, KS. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL.

Dodge Ram 2500 2010 Steering

Dodge Ram 2500 2010 Steering Review #10605989

DODGE RAM 2500 2010 car safety problem was reported on June 25, 2014.DODGE RAM 2500 2010, manufactured by Chrysler (FCA US LLC) had a problem with STEERING . i received a recall for this vehicle in january about a tie rod ball stud. it says "this could cause loss of directional control and/or crash without warning. now that sounds kind of serious to me so i called the dealer and they said they didn't have the parts to make the repair yet. so i've called every 6-8 weeks to see if they have the parts and they still don't. i have moved from 8th to 5th on the waiting list in 6 months so that certainly makes me feel better. at this rate i should have my potential "crash without warning" problem resolved about next july.....if i haven't "crashed without warning". the dealer doesn't seem to be the problem......it seems to be chrysler. so, what to i do now???? *tr.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7LT2ETXAG. Dodge Ram 2500 2010 problem was reported in MANCHESTER, NH. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. FUEL TYPE: GAS.

Dodge Ram 2500 2010 Steering Review #10606051

DODGE RAM 2500 2010 car safety problem was reported on Dec 18, 2013.DODGE RAM 2500 2010, manufactured by Chrysler (FCA US LLC) had a problem with STEERING . they tell us now that they have no idea when they can replace our tie rod, it first was recalled last dec. 2013. it is now june 25, 2014. i would think it should have been replaced by now. or dodge should not be allowed to make anymore cars, until these vehicles are repaired. *tr.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2CL4AG. Dodge Ram 2500 2010 problem was reported in CLOQUET, MN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL.

Dodge Ram 2500 2010 Steering Review #10606093

DODGE RAM 2500 2010 car safety problem was reported on Feb 14, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact received two recall notifications of nhtsa campaign id number 13v529000 (steering) and stated that the part needed to service the vehicle under the recall was unavailable. the dealer was unable to provide an expected date for the remedy part to become available. the manufacturer was not notified of the problem. the contact had not experienced a failure. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2HL4AG. Dodge Ram 2500 2010 problem was reported in SHELBYVILLE, KY. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10606136

DODGE RAM 2500 2010 car safety problem was reported on Apr 08, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact received a notification for recall nhtsa campaign id number 13v529000 (steering). however, the part to do the repairs was unavailable. the manufacturer was made aware of the problem. the contact had not experienced a failure. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7TT2CT9AG. Dodge Ram 2500 2010 problem was reported in COLESBURG, IA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10606181

DODGE RAM 2500 2010 car safety problem was reported on Apr 02, 2014.DODGE RAM 2500 2010, manufactured by Chrysler (FCA US LLC) had a problem with STEERING . received notice of a recall and contacted the dealer to schedule replacement of the left tie rod end under recall n49/nhtsa 13v-529 and was put on the list for the repair, now i have received a second notice for the same recall and when i contact the dealer their response is they are having trouble accessing the parts from dodge. this is unacceptable the dealer also stated that this is a problem threw out the dealer network. nobody can get the tie rod end for the left side. this should be a priority for all involved and needs to be resolved. a very serious safety issue! *tr.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2CL7AG. Dodge Ram 2500 2010 problem was reported in DEVINE, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL.

Dodge Ram 2500 2010 Steering Review #10606467

DODGE RAM 2500 2010 car safety problem was reported on Nov 15, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact received nhtsa campaign id number: 13v529000 (steering) and stated that the part needed was unavailable to perform the recall repair. the dealer informed that one remedy part was being sent every sixty days. the manufacturer was not notified of the issue. the contact had not experienced a failure. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2CL4AG. Dodge Ram 2500 2010 problem was reported in MEDICINE PARK, OK. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10606518

DODGE RAM 2500 2010 car safety problem was reported on Jan 06, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact received nhtsa campaign id number: 13v529000 (steering) and stated that the part needed was unavailable to perform the repair. the dealer was unable to provide an expected date for the remedy part to become available. the manufacturer was notified of the issue. the contact had not experienced a failure. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2CL0AG. Dodge Ram 2500 2010 problem was reported in SULTAN, WA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Unknown Or Other

Dodge Ram 2500 2010 Unknown Or Other Review #10606589

DODGE RAM 2500 2010 car safety problem was reported on Feb 01, 2014.DODGE RAM 2500 2010, manufactured by Chrysler (FCA US LLC) had a problem with UNKNOWN OR OTHER . we keep receiving notifications of recalls. we have contacted a dealer to have repairs done. for approx 6 months, we have been on a list for the dealer to get parts. they say they cant get any parts. we pull a cattle trailor with this truck and are worried about an accident. why are we not able to get parts to fix? *tr.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2CL4AG. Dodge Ram 2500 2010 problem was reported in MTN GROVE, MO. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL.

Dodge Ram 2500 2010 Steering

Dodge Ram 2500 2010 Steering Review #10607269

DODGE RAM 2500 2010 car safety problem was reported on Dec 30, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . no incident, just a question of concern. we have received several notices of a recall for our 2010 3/4 ton truck, but the dealerships (2! both glenwood springs and grand junction) state they cannot get the parts and have on us a waiting list. what the heck??!! it has been 7 months! if a recall about the steering is in place, why is there no preparation and way to resolve this? and we have had to have our steering worked on before, but not correcting this recall. so, now what happens if the steering fails and i am still on the list? who is responsible? i tried to do the right thing but apparently the shortage of parts is creating another hazard. i certainly don't want to be cruising down i-70 at 75 mph and the steering fails! one of the dealerships stated they get 2 repair kits a month and this may take 1-2 years to get thru the waiting list for the repair. this cannot be right!.0 person(s) were injured. 0 person(s) died.Mileage was 40000 miles. Vehicle Identification Number (VIN):3D7UT2CL5AG. Dodge Ram 2500 2010 problem was reported in SILT, CO. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2010 Steering Review #10607317

DODGE RAM 2500 2010 car safety problem was reported on Jan 02, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact received a notification for recall nhtsa campaign id number 13v529000 (steering) however, the contact was not able to have the vehicle serviced under the recall because the part needed was unavailable to perform the repair. the dealer was unable to provide an expected date for the remedy part to become available. the manufacturer was not notified of the problem. the contact had not experienced a failure. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7LT2ET8AG. Dodge Ram 2500 2010 problem was reported in BLACK HAWK, SD. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10607459

DODGE RAM 2500 2010 car safety problem was reported on Jan 06, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact received the recall notification related to nhtsa campaign id number 13v528000 (steering). the contact stated that the repair was not taken care of in a reasonable amount of time. the dealer indicated parts were not available. contact had not experienced a failure. the manufacturer was not contacted. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7TT2CT5AG. Dodge Ram 2500 2010 problem was reported in GARDNER, MA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Suspension

Dodge Ram 2500 2010 Suspension Review #10607460

DODGE RAM 2500 2010 car safety problem was reported on Jan 06, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with SUSPENSION . received safety recall n49/nhtsa 13v-529 for the left tie rod of my dodge ram in early january of this year. called local dealer yakima chrysler dodge jeep ram (509-248-1300) beginning 1/6/14 and was told the necessary repair parts had not been supplied by chrysler and to call back the following week. the next week when i called i received the same information. this went on for several more weeks until i gave up my weekly calls. i called the dealer again in april of this year and was told chrysler was only supplying one set of parts on this recall a week and that i could be added to a list and would be called when the parts were available for my repair. at that time they advised there were approximately 50 others ahead of me on the list. have heard nothing since that time but today received another notice on the recall from chrysler, apparently to remind me that i have not had the work done, despite the fact that they are not providing the appropriate parts to their dealers to perform the repair..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2CL0AG. Dodge Ram 2500 2010 problem was reported in YAKIMA, WA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering

Dodge Ram 2500 2010 Steering Review #10607814

DODGE RAM 2500 2010 car safety problem was reported on Sept 16, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact received a recall notice for nhtsa campaign number: 13v58000 (steering). the contact stated that the repair had exceeded a reasonable amount of time. the dealer stated that the parts were unavailable to repair the vehicle. the manufacturer was not notified. the contact had not experienced a failure..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2CL1AG. Dodge Ram 2500 2010 problem was reported in READING, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10607962

DODGE RAM 2500 2010 car safety problem was reported on Mar 14, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . after receiving the recall on the left tie rod end for my truck, i took the truck to the dealer and was told they did not have guidance as to what to do yet so i should bring the truck back. a few weeks later, i returned and was told that they would order the part, but they were only allowed to order 1 per week and it may be months or years before my parts showed up. part order was placed in march of 2014. it is now july of 2014 and the repair has still not been made. it would appear to me that an "important safety recall" would be handled in a more timely manner. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2HLXAG. Dodge Ram 2500 2010 problem was reported in KANSAS CITY, MO. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10608558

DODGE RAM 2500 2010 car safety problem was reported on May 06, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact received a recall notification for nhtsa campaign id number: 13v529000 (steering) however, the part to do the repairs was unavailable. the manufacturer was made aware of the problem. the contact had not experienced a failure..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D73Y4CL8AG. Dodge Ram 2500 2010 problem was reported in INDEPENDENCE, KS. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2010 Steering Review #10608926

DODGE RAM 2500 2010 car safety problem was reported on Nov 20, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact stated recall nhtsa campaign number: 13v529000 (steering) had exceeded the reasonable amount of time for repair. the dealer stated that the part was not available for repair. the manufacturer was not made aware of the delay. the vehicle was not repaired. the contact had not experienced the failure. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2CL4AG. Dodge Ram 2500 2010 problem was reported in MINOT, ND. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10609037

DODGE RAM 2500 2010 car safety problem was reported on Dec 16, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact received a notification for recall nhtsa campaign id number 13v528000 (steering). the contact stated that she had contacted the dealer and the manufacturer numerous times and they were not able to provide a time frame for when the parts would be available for the repairs. the repair was not taken care of in a reasonable amount of time. contact had not experienced a failure..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D73Y3HL7AG. Dodge Ram 2500 2010 problem was reported in LAUREL, MD. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Suspension

Dodge Ram 2500 2010 Suspension Review #10609320

DODGE RAM 2500 2010 car safety problem was reported on Mar 05, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with SUSPENSION . received first notice of left tie rod ball stud (recall n49) recall in early march 2014. scheduled and took vehicle into dealership for repairs. when brought in for repairs, i was told the replacement part has been recalled again and dodge was waiting for new parts. have called and checked every 1-2 weeks on status with little or no information just saying they are waiting for parts and they are only getting one part every 7 days and we are on the list...not releasing where on the list, how many are on the list or when i can expect the service. dodge has told me the tie rod is bad and that they cannot guarantee my safety or recommend the use of my truck. this vehicle is used for construction and personal use, including hauling and towing and i do not feel safe driving it on the road, for either myself, family or other people. this is the only vehicle i have for work, and cannot afford another temporary vehicle. .0 person(s) were injured. 0 person(s) died.Mileage was 80000 miles. Vehicle Identification Number (VIN):3D7UT2CL2AG. Dodge Ram 2500 2010 problem was reported in WAVERLY, NE. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2010 Steering

Dodge Ram 2500 2010 Steering Review #10609342

DODGE RAM 2500 2010 car safety problem was reported on July 07, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact received a notification of nhtsa campaign id number: 13v529000 (steering) in december of 2013. the contact mentioned that a second notification was received in july of 2014. the contact stated that the parts for the recall repair were not available and only one part was being received every three months. the contact had not experienced a failure. updated 09/09/14*lj.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2CL1AG. Dodge Ram 2500 2010 problem was reported in REDLENDS, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Dodge Ram 2500 2010 drive type:4WD. FUEL SYSTEM:Turbo. FUEL TYPE: DIESEL.

Dodge Ram 2500 2010 Steering Review #10609651

DODGE RAM 2500 2010 car safety problem was reported on Dec 18, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact stated nhtsa campaign number: 13v529000 (steering) had exceeded the reasonable amount of time for repair. the dealer stated the part was not available for repair. the manufacturer was not made aware of the delay. the vehicle was not repaired. the contact had no experienced the failure. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7TT2CT3AG. Dodge Ram 2500 2010 problem was reported in ESTACADA, OR. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10609947

DODGE RAM 2500 2010 car safety problem was reported on May 07, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact received notification of nhtsa campaign number: 13v529000 (steering) and stated that the part to do the repairs was unavailable. the manufacturer was made aware of the issue. the contact had not experienced a failure. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7LT2ET3AG. Dodge Ram 2500 2010 problem was reported in JACKSON, ME. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2010 Steering Review #10616875

DODGE RAM 2500 2010 car safety problem was reported on July 27, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact stated that while reversing, the vehicle became difficult to steer. the vehicle was towed to a local mechanic who stated that the left tie rod failed. the manufacturer was contacted. the vehicle was not repaired. the failure mileage was 67,000..0 person(s) were injured. 0 person(s) died.Mileage was 67000 miles. Vehicle Identification Number (VIN):3D7TT2HTXAG. Dodge Ram 2500 2010 problem was reported in PAGOSA SPIRNGS, CO. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2010 Steering Review #10617705

DODGE RAM 2500 2010 car safety problem was reported on Jan 06, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl * the contact owns a 2010 dodge ram 2500. the contact received a recall notice for nhtsa campaign number: 13v529000 (steering); however, the dealer stated that the parts needed for the repair were unavailable. the contact called for months, but was unable to receive confirmation from the dealer as to when the parts would arrive. the manufacturer was notified. the contact had not experienced a failure. updated 10/7/14*cn updated 11/18/14.0 person(s) were injured. 0 person(s) died.Mileage was 23100 miles. Vehicle Identification Number (VIN):3D7UT2CL7AG. Dodge Ram 2500 2010 problem was reported in RIO RANCHO, NM. Vehicle was purchased on Dec 01, 2009. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Dodge Ram 2500 2010 drive type:4WD. FUEL SYSTEM:Turbo. FUEL TYPE: DIESEL. VEHICLE SPEED: 50 mph. DEALER'S NAME: LITHIA DODGE . DEALER'S CITY: SANTA FE . DEALER'S STATE CODE: NM. DEALER'S ZIPCODE: 87501 .

Dodge Ram 2500 2010 Unknown Or Other

Dodge Ram 2500 2010 Unknown Or Other Review #10617945

DODGE RAM 2500 2010 car safety problem was reported on Oct 01, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with UNKNOWN OR OTHER . i was driving on albert pike (garland county arkansas) when i lost control of the steering and ran off the road over the sidewalk. i promptly called the dealership (tim parker) and found out there was a recall notice on the tie rod end. which i never recieved. the dealership towed the vehicle in and it was repaierd a couple days later. in june of 2014 i was driving down 70 east (garland county arkansas) and started to loose the ability to steer properly because of a massive wobble in the front end. i took the truck into america tire and wheels. they put the truck on the lift and the front wheels were so loose that you could wobble the tire back and forth approx. three inches. i again took my truck to tim parker to find out there was a recall on the recall. once again, we never recieved any notification. at this time i had new set of tires which had 14000 miles on them and the right front was worn through the wear bars and the left front was severly cupped. i spoke with the dodge customer service and the dealership and they refused to replace or provide any compensation for the tire. they said the front recalls had nothing to do with the tire wear. they. daodge, had already put my life and the life's of others in jeapordy, by this issue and by not notifying us of the two recalls until after there was an incident. i feel like the manufacturer and the dealer, there direct representative, should be held responsible and are liable for all repairs involved with this recall. i could have been killed or killed someone else. dodge needs to back the products they are seeling to the public. .Vehicle was involved in a crash. 0 person(s) were injured. 0 person(s) died.Mileage was 45000 miles. Vehicle Identification Number (VIN):3D73Y3CL4AG. Dodge Ram 2500 2010 problem was reported in HOT SPRINGS, AR. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 35 mph.

Dodge Ram 2500 2010 Steering

Dodge Ram 2500 2010 Steering Review #10619501

DODGE RAM 2500 2010 car safety problem was reported on Feb 01, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact received a recall notice for nhtsa campaign number: 13v529000 (steering); however, the dealer stated that the part needed for the repair was unavailable. the manufacturer was not notified. the contact had not experienced a failure. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2CL6AG. Dodge Ram 2500 2010 problem was reported in CLEVELAND, VA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10619556

DODGE RAM 2500 2010 car safety problem was reported on Jan 06, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . we received a recall notice for our 2010 dodge ram 2500 truck the end of december 2013. it stated the left tie rod ball stud may be faulty. we have been trying to have it replace as instructed since 1/6/14 with no luck. the dealers in wickenburg and avondale, arizona state the parts are not available. we have been waiting 8 months to have the problem addressed. if something happens due to the shortage of parts we will follow up with legal action as it looks like it will be our only choice as the manufactures is not making parts available in a timely manner. mary goodman.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2CL7AG. Dodge Ram 2500 2010 problem was reported in SALOME, AZ. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10619579

DODGE RAM 2500 2010 car safety problem was reported on Jan 01, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . 2010 dodge ram 2500. consumer writes in regards to the defective tie rod assembly recall repairs. *smd the consumer stated he called the dealer in jan 2014, to make an appointment to have the defective tie rod replaced. however, he was placed on a waiting list, because the parts were not available. as of july 11, 2014, the consumer is still on the waiting list. *jb.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2CL1AG. Dodge Ram 2500 2010 problem was reported in BRIMLEY, MI. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Dodge Ram 2500 2010 drive type:4WD. FUEL SYSTEM:Turbo. FUEL TYPE: DIESEL. DEALER'S NAME: O'CONNER DODGE . DEALER'S CITY: PICKFORD . DEALER'S STATE CODE: MI.

Dodge Ram 2500 2010 Steering Review #10621842

DODGE RAM 2500 2010 car safety problem was reported on Aug 05, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact stated that while driving at various speeds and coming to a stop to make a turn, a loud abnormal noise emitted from the front end of the vehicle. additionally, the steering wheel began to vibrate. the contact stated that the part needed for nhtsa campaign id number: 13v529000 (steering) was not available. the manufacturer was notified of the failure. the approximate failure mileage was 70,000. .0 person(s) were injured. 0 person(s) died.Mileage was 70000 miles. Vehicle Identification Number (VIN):3D7UT2CLXAG. Dodge Ram 2500 2010 problem was reported in PARADISE, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10621958

DODGE RAM 2500 2010 car safety problem was reported on May 15, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact received a recall notice for nhtsa campaign number: 13v529000 (steering). the contact called the dealer three months ago to have the recall repair completed on the vehicle and was recently advised that the parts were still unavailable. the contact had not experienced a failure..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2CL5AG. Dodge Ram 2500 2010 problem was reported in ODEM, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10627111

DODGE RAM 2500 2010 car safety problem was reported on Aug 21, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact stated that nhtsa campaign number: 13v529000 (steering) exceeded a reasonable amount of time for the recall repair. the dealer stated that the part was not available. the manufacturer was notified and the contact was placed on a waiting list. the vin was unavailable. the contact had not experienced a failure. .0 person(s) were injured. 0 person(s) died.Dodge Ram 2500 2010 problem was reported in SCRANTON, PA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10628535

DODGE RAM 2500 2010 car safety problem was reported on Aug 26, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . have been unsuccessful in getting nhtsa 13v-529 recall done on my truck. i have been put off by the carson valley nevada dealership since april 2014..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2CL7AG. Dodge Ram 2500 2010 problem was reported in GARDNERVILLE, NV. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Unknown Or Other

Dodge Ram 2500 2010 Unknown Or Other Review #10632228

DODGE RAM 2500 2010 car safety problem was reported on June 09, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with UNKNOWN OR OTHER . i was driving west in road tx-375-loop heading the i10, i took an exit for i10 east wich is a bridge. i took it and then i heared a sound on the rear wheels so i slowed down, after that the sound stopped and i continued to incorporate to i10-east. after i took the i10 i was driving around 60 mph when suddenly i heard the sound again but this time after a few second a different sound appeared and the rear wheels stopped resulting in completely lost of control. my vehicle started to go with no direction and than took me out of the highway, once i was on the side of the road the vehicle make a 180 degrees turn and i stopped heading wrong way. i was so lucky because there were some traffic signs and i didnt crash any of them and also because even though that highway is always full with traffic i didnt crash with any other vehicle. once i took a look of my truck i saw that the driveshaft was separated from the rear axel. i didnt filled a claim before beacuse chrysler told me they were going to fix it since that incident happened because of a recall they didnt fix before. the recall number is m34 and its been 3 months and after i could have died in that accident they havent helped me at all. my vehicle is still in the dealer and chrysler wont authorize to fix it.1 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7R61CT8AG. Dodge Ram 2500 2010 problem was reported in EL PASO, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 60 mph.

Dodge Ram 2500 2010 Power Train

Dodge Ram 2500 2010 Power Train Review #10632228

DODGE RAM 2500 2010 car safety problem was reported on June 09, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with POWER TRAIN . i was driving west in road tx-375-loop heading the i10, i took an exit for i10 east wich is a bridge. i took it and then i heared a sound on the rear wheels so i slowed down, after that the sound stopped and i continued to incorporate to i10-east. after i took the i10 i was driving around 60 mph when suddenly i heard the sound again but this time after a few second a different sound appeared and the rear wheels stopped resulting in completely lost of control. my vehicle started to go with no direction and than took me out of the highway, once i was on the side of the road the vehicle make a 180 degrees turn and i stopped heading wrong way. i was so lucky because there were some traffic signs and i didnt crash any of them and also because even though that highway is always full with traffic i didnt crash with any other vehicle. once i took a look of my truck i saw that the driveshaft was separated from the rear axel. i didnt filled a claim before beacuse chrysler told me they were going to fix it since that incident happened because of a recall they didnt fix before. the recall number is m34 and its been 3 months and after i could have died in that accident they havent helped me at all. my vehicle is still in the dealer and chrysler wont authorize to fix it.1 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7R61CT8AG. Dodge Ram 2500 2010 problem was reported in EL PASO, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 60 mph.

Dodge Ram 2500 2010 Wheels

Dodge Ram 2500 2010 Wheels Review #10632228

DODGE RAM 2500 2010 car safety problem was reported on June 09, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with WHEELS . i was driving west in road tx-375-loop heading the i10, i took an exit for i10 east wich is a bridge. i took it and then i heared a sound on the rear wheels so i slowed down, after that the sound stopped and i continued to incorporate to i10-east. after i took the i10 i was driving around 60 mph when suddenly i heard the sound again but this time after a few second a different sound appeared and the rear wheels stopped resulting in completely lost of control. my vehicle started to go with no direction and than took me out of the highway, once i was on the side of the road the vehicle make a 180 degrees turn and i stopped heading wrong way. i was so lucky because there were some traffic signs and i didnt crash any of them and also because even though that highway is always full with traffic i didnt crash with any other vehicle. once i took a look of my truck i saw that the driveshaft was separated from the rear axel. i didnt filled a claim before beacuse chrysler told me they were going to fix it since that incident happened because of a recall they didnt fix before. the recall number is m34 and its been 3 months and after i could have died in that accident they havent helped me at all. my vehicle is still in the dealer and chrysler wont authorize to fix it.1 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7R61CT8AG. Dodge Ram 2500 2010 problem was reported in EL PASO, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 60 mph.

Dodge Ram 2500 2010 Steering

Dodge Ram 2500 2010 Steering Review #10632494

DODGE RAM 2500 2010 car safety problem was reported on Sept 11, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact received a notification for recall nhtsa campaign id number: 13v529000 (steering). however, the part needed was unavailable to perform the repair. the manufacturer was not notified of the issue. the contact had not experienced a failure..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2CL4AG. Dodge Ram 2500 2010 problem was reported in SEARCY, AR. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10637232

DODGE RAM 2500 2010 car safety problem was reported on May 15, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact received a recall notification for nhtsa campaign number: 13v529000 (steering); however, the part needed to repair the vehicle was unavailable. the contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. the manufacturer was not notified. the contact had not experienced a failure. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2HL2AG. Dodge Ram 2500 2010 problem was reported in TRAIL, OR. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10637518

DODGE RAM 2500 2010 car safety problem was reported on Dec 02, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact received a recall notification for nhsta campaign number: 13v529000 (steering) in december of 2013. the part needed to repair the vehicle was unavailable. the manufacturer was made aware of the issue. the contact had not experienced a failure..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2CL1AG. Dodge Ram 2500 2010 problem was reported in BRAZORIA, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10640402

DODGE RAM 2500 2010 car safety problem was reported on Sept 30, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . i took this vehicle to martin swanty chrysler dodge in kingman arrzona due to a recall noticed that i had received. this was my second trip their as the first time they didn't have the replacement parts. the second time i returned at the appointed time and 5 hours later they still had not worked on the truck. not having the time to spend at their shop i took the truck back and was told by them thats the way it is. so this truck has not been given the replacement parts as called for. dealer handled this very poorly and i believe it to be because it was not purchased there.0 person(s) were injured. 0 person(s) died.Mileage was 68000 miles. Vehicle Identification Number (VIN):3D7UT2CL1AG. Dodge Ram 2500 2010 problem was reported in MEADVIEW, AZ. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2010 Steering Review #10640419

DODGE RAM 2500 2010 car safety problem was reported on Mar 17, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . i had contacted sheridan motor inc. in sheridan, wy to repair n49 / nhtsa 13v-529 recall, about 2 weeks prior to scheduled service date. when i picked up my truck, the service rep, stated they didn't have the parts required to complete the recall and i would be placed on a waiting list and notified when the parts arrive. i have still not been contacted. the first time this recall happened (approx., 2012) the same situation happened, sheridan motors could not get the parts required for the recall. i had to drive 60 miles to another dodge dealer to get repair done. i have now moved to cheyenne, wy and i hope the local dealer can get the parts required to repair this recall..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2CL8AG. Dodge Ram 2500 2010 problem was reported in CHEYENNE, WY. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10641789

DODGE RAM 2500 2010 car safety problem was reported on Oct 01, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . had been waiting over 6 months for parts from dealership to repair left tie rod recall n49. on 10/01/14, upon leaving a gas station and accelerating to proceed down highway, the left tie rod broke, causing the vehicle's left wheel to lock, resulting in total loss of control and steering ability, and the vehicle crossed over to the right shoulder, landing partially in a ditch and partially remaining on the road. luckily there was no traffic next to me and no one was injured. the truck had to be towed to the local dodge dealership, who happened to have the part they were holding for another customer who had not responded to the notice the part was available, and was used on our truck the same day. the disturbing thing is that chrysler will now not reimburse my towing expense, even though it was totally related to this recall failure. i have been contacting my local dealership routinely for over 6 months to inquire about this part and been told each time that the part is not available and i am 'on the list'. on the date of the incident, i was told by the service personnel that they are allowed on a small number of parts and that they cannot get additional parts until they submit proof of installing the previously sent parts. yet this dealership had parts that they had been holding for several weeks for a customer who had not responded to the notice their parts were in. meanwhile, myself and many others are waiting for parts and risking injury each time we have to take these vehicles on the road. i live outside the city limits and must take a highway or interstate to travel anywhere. luckily my breakdown/accident occurred at a slow speed and not the 60 mph that i would have been going in just a few more minutes. it doesn't appear that chrysler truly values the safety of their customers..Vehicle was involved in a crash. 0 person(s) were injured. 0 person(s) died.Mileage was 79600 miles. Vehicle Identification Number (VIN):3D7UT2CL4AG. Dodge Ram 2500 2010 problem was reported in WAYNESVILLE, NC. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 25 mph.

Dodge Ram 2500 2010 Steering Review #10644520

DODGE RAM 2500 2010 car safety problem was reported on Feb 20, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact received a recall notification for nhtsa campaign number: 13v529000 (steering); however, the part needed to repair the vehicle was unavailable. the manufacturer was notified. the contact had not experienced a failure..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7TT2CT0AG. Dodge Ram 2500 2010 problem was reported in WENONAH, NJ. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10651710

DODGE RAM 2500 2010 car safety problem was reported on Oct 31, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact stated that while entering a drive way, an abnormal sound emitted throughout the vehicle as the contact lost control. the contact as a certified mechanic diagnosed that the left outer tie rod had separated from the vehicle. the vehicle had not been diagnosed or repaired by the dealer. the vehicle was included in recall nhtsa campaign number: 13v529000 (steering). however, the part needed to do the repair was unavailable. the manufacturer was notified of the failure. the approximate failure mileage was 70,000. .0 person(s) were injured. 0 person(s) died.Mileage was 70000 miles. Vehicle Identification Number (VIN):3D7UT2HL1AG. Dodge Ram 2500 2010 problem was reported in JUPITER, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Linkages Tie Rod Assembly

Dodge Ram 2500 2010 Steering Linkages Tie Rod Assembly Review #10651710

DODGE RAM 2500 2010 car safety problem was reported on Oct 31, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING:LINKAGES:TIE ROD ASSEMBLY . tl* the contact owns a 2010 dodge ram 2500. the contact stated that while entering a drive way, an abnormal sound emitted throughout the vehicle as the contact lost control. the contact as a certified mechanic diagnosed that the left outer tie rod had separated from the vehicle. the vehicle had not been diagnosed or repaired by the dealer. the vehicle was included in recall nhtsa campaign number: 13v529000 (steering). however, the part needed to do the repair was unavailable. the manufacturer was notified of the failure. the approximate failure mileage was 70,000. .0 person(s) were injured. 0 person(s) died.Mileage was 70000 miles. Vehicle Identification Number (VIN):3D7UT2HL1AG. Dodge Ram 2500 2010 problem was reported in JUPITER, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering Review #10655341

DODGE RAM 2500 2010 car safety problem was reported on Dec 19, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . i received a recall notice (n49) on this vehicle in december of 2013. i contacted the dealership in january of 2014 as requested. the dealership looked at my vehicle and confirmed the problem. still no repair was made by may of 2014. i contacted the recall phone number supplied with the notice. they then set me up with another dealer. which i had to take my vehicle to them also to confirm the problem. long story short. here it is the 17th of november and i still don't have my vehicle repaired. the dealership has no idea when i will have the work done. this makes almost a year of waiting, and two(2) dealerships of dealing with..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2HL0AG. Dodge Ram 2500 2010 problem was reported in LILLIAN, AL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Tires Sidewall

Dodge Ram 2500 2010 Tires Sidewall Review #10658952

DODGE RAM 2500 2010 car safety problem was reported on Apr 01, 2014.DODGE RAM 2500 2010, manufactured by Chrysler (FCA US LLC) had a problem with TIRES:SIDEWALL . tl* the contact owns a 2010 dodge ram 2500 equipped with michelin ltx a/s,v tires (na), size 245/70/r17 (na). the dot number was b7x6lj4x0310. the contact stated that all four tires developed cracks on the sidewall and the tread was separating. the vehicle was taken to dealer. the technician diagnosed that the tires were not oiling themselves due to lack of winter driving. the tires were not replaced. the manufacturer was notified of the issue. the approximate failure mileage of the tire and vehicle was 13,000. updated 1/1315*cn updated 01/15/15.*jb.Mileage was 13000 miles. Vehicle Identification Number (VIN):3D7TP2CL8AG. Dodge Ram 2500 2010 problem was reported in GIBRALTAR, MI. Original Owner. Vehicle was purchased on Apr 02, 2010. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Dodge Ram 2500 2010 drive type:RWD. FUEL SYSTEM:Turbo. FUEL TYPE: DIESEL. Dodge Ram 2500 2010 TRANSMISSION TYPE: AUTO. DEALER'S NAME: MCHENERYS WOODHAVEN . DEALER'S TELEPHONE NUMBER: 734-362-3100 . DEALER'S CITY: WOODHAVEN . DEALER'S STATE CODE: MI. DEALER'S ZIPCODE: 48183 .

Dodge Ram 2500 2010 Tires Tread/belt

Dodge Ram 2500 2010 Tires Tread/belt Review #10658952

DODGE RAM 2500 2010 car safety problem was reported on Apr 01, 2014.DODGE RAM 2500 2010, manufactured by Chrysler (FCA US LLC) had a problem with TIRES:TREAD/BELT . tl* the contact owns a 2010 dodge ram 2500 equipped with michelin ltx a/s,v tires (na), size 245/70/r17 (na). the dot number was b7x6lj4x0310. the contact stated that all four tires developed cracks on the sidewall and the tread was separating. the vehicle was taken to dealer. the technician diagnosed that the tires were not oiling themselves due to lack of winter driving. the tires were not replaced. the manufacturer was notified of the issue. the approximate failure mileage of the tire and vehicle was 13,000. updated 1/1315*cn updated 01/15/15.*jb.Mileage was 13000 miles. Vehicle Identification Number (VIN):3D7TP2CL8AG. Dodge Ram 2500 2010 problem was reported in GIBRALTAR, MI. Original Owner. Vehicle was purchased on Apr 02, 2010. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Dodge Ram 2500 2010 drive type:RWD. FUEL SYSTEM:Turbo. FUEL TYPE: DIESEL. Dodge Ram 2500 2010 TRANSMISSION TYPE: AUTO. DEALER'S NAME: MCHENERYS WOODHAVEN . DEALER'S TELEPHONE NUMBER: 734-362-3100 . DEALER'S CITY: WOODHAVEN . DEALER'S STATE CODE: MI. DEALER'S ZIPCODE: 48183 .

Dodge Ram 2500 2010 Suspension

Dodge Ram 2500 2010 Suspension Review #10659456

DODGE RAM 2500 2010 car safety problem was reported on Nov 19, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with SUSPENSION . tl* the contact owns a 2010 dodge ram 2500. the contact received notification of nhtsa campaign number: 13v529000 (suspension) however, the part to do the repair was unavailable. the contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. the manufacturer was made aware of the issue. the contact had not experienced a failure..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7TT2CT9AG. Dodge Ram 2500 2010 problem was reported in MINOT, ND. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering

Dodge Ram 2500 2010 Steering Review #10660788

DODGE RAM 2500 2010 car safety problem was reported on Dec 16, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact received a notice for nhtsa campaign number: 13v529000 (steering) and stated that the part needed was unavailable to perform the repair. the manufacturer was not notified of this issue. the contact had not experienced a failure. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2CL7AG. Dodge Ram 2500 2010 problem was reported in APEX, NC. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Electrical System

Dodge Ram 2500 2010 Electrical System Review #10663753

DODGE RAM 2500 2010 car safety problem was reported on Dec 12, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with ELECTRICAL SYSTEM . dodge/chrysler is not responsive to the recall notices. when we receive the notices they have no parts and treat customers indifferently. we have not had an incident but the possibilities are frightening. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2CL3AG. Dodge Ram 2500 2010 problem was reported in PADUCAH, KY. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Fuel System, Diesel

Dodge Ram 2500 2010 Fuel System, Diesel Review #10664444

DODGE RAM 2500 2010 car safety problem was reported on Dec 15, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with FUEL SYSTEM, DIESEL . tl* the contact owns a 2010 dodge ram 2500. the contact received notification of nhtsa campaign number: 14v635000 (engine and engine cooling, fuel system, diesel) however, the part to do the repair was unavailable. the contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. the manufacturer was not notified of the delay. the contact had not experienced a failure. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2HLXAG. Dodge Ram 2500 2010 problem was reported in SAYBROOK, IL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Engine And Engine Cooling

Dodge Ram 2500 2010 Engine And Engine Cooling Review #10664444

DODGE RAM 2500 2010 car safety problem was reported on Dec 15, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with ENGINE AND ENGINE COOLING . tl* the contact owns a 2010 dodge ram 2500. the contact received notification of nhtsa campaign number: 14v635000 (engine and engine cooling, fuel system, diesel) however, the part to do the repair was unavailable. the contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. the manufacturer was not notified of the delay. the contact had not experienced a failure. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2HLXAG. Dodge Ram 2500 2010 problem was reported in SAYBROOK, IL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Steering

Dodge Ram 2500 2010 Steering Review #10667162

DODGE RAM 2500 2010 car safety problem was reported on Dec 18, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact received a notification for nhtsa campaign id numbers: 14v635000 (engine and engine cooling, fuel system, diesel) and 13v529000 (steering). the contact stated that the part needed was unavailable to repair the vehicle. the dealer was unable to inform when the part would become available. the manufacturer was not notified of the issue. the contact had not experienced a failure. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2CL4AG. Dodge Ram 2500 2010 problem was reported in KARNEY, NE. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Engine

Dodge Ram 2500 2010 Engine Review #10667162

DODGE RAM 2500 2010 car safety problem was reported on Dec 18, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with ENGINE . tl* the contact owns a 2010 dodge ram 2500. the contact received a notification for nhtsa campaign id numbers: 14v635000 (engine and engine cooling, fuel system, diesel) and 13v529000 (steering). the contact stated that the part needed was unavailable to repair the vehicle. the dealer was unable to inform when the part would become available. the manufacturer was not notified of the issue. the contact had not experienced a failure. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7UT2CL4AG. Dodge Ram 2500 2010 problem was reported in KARNEY, NE. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2010 Engine Review #10667930

DODGE RAM 2500 2010 car safety problem was reported on Nov 18, 2013.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with ENGINE . was driving, check engine light came on, temperture gauge went to over 200 degrees. called dealer, took in. o2 sensor problem. supposedly fixed on 12/10/13, check engine light came on again 12/25/13. called dealer, supposedly fixed on 12/30/13. called chrysler, case opened. check engine light came on again, back to dealer. check engine light keeps coming on, every time is o2 sensor. not repaired. have talked to chrysler about lemon, won't address, said contact state attorney general, make complaint. have talked to man in ohio, he has same problem, sueing. bought truck brand new. problem started when truck had less than 16000 miles..0 person(s) were injured. 0 person(s) died.Mileage was 15799 miles. Vehicle Identification Number (VIN):3C6UD5ML5CG. Dodge Ram 2500 2010 problem was reported in PAW PAW, MI. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 45 mph.

Dodge Ram 2500 2010 Power Train

Dodge Ram 2500 2010 Power Train Review #10668614

DODGE RAM 2500 2010 car safety problem was reported on Dec 27, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with POWER TRAIN . driving on rural highway 65mph when truck began to make grinding noise. after stopping and inspecting drive train it was discovered the center support bearing had failed and allowed the 2 piece drive shaft to become loose. fortunately the support bracket kept it in place. had bracket not held in place catastrophic drive train failure could have occurred and possibly causing accident..0 person(s) were injured. 0 person(s) died.Mileage was 164000 miles. Vehicle Identification Number (VIN):3D7UT2CL1AG. Dodge Ram 2500 2010 problem was reported in IRONWOOD, MI. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 65 mph.

Dodge Ram 2500 2010 Steering

Dodge Ram 2500 2010 Steering Review #10668878

DODGE RAM 2500 2010 car safety problem was reported on Dec 29, 2014.DODGE RAM 2500 2010, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2010 dodge ram 2500. the contact received a notification of nhtsa campaign number: 13v529000 (steering); however, the part to the repair was unavailable. the contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. the manufacturer was made aware of the issue. the contact had not experienced a failure. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7TT2CT6AG. Dodge Ram 2500 2010 problem was reported in NORTH POLE, AK. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Electrical System 2 Review(s)

Electrical System Ignition 1 Review(s)

Electrical System Wiring 1 Review(s)

Engine 9 Review(s)

Engine And Engine Cooling 2 Review(s)

Engine And Engine Cooling Engine Diesel 1 Review(s)

Engine And Engine Cooling Exhaust System 1 Review(s)

Engine And Engine Cooling Exhaust System Emission Control 1 Review(s)

Exterior Lighting Headlights 1 Review(s)

Fuel System, Diesel 2 Review(s)

Fuel/propulsion System 1 Review(s)

Power Train 3 Review(s)

Power Train Driveline Differential Unit 1 Review(s)

Service Brakes 1 Review(s)

Service Brakes, Hydraulic 2 Review(s)

Steering 124 Review(s)

Steering Linkages Tie Rod Assembly 6 Review(s)

Structure 3 Review(s)

Structure Body 2 Review(s)

Suspension 20 Review(s)

Suspension Front 2 Review(s)

Tires 3 Review(s)

Tires Sidewall 1 Review(s)

Tires Tread/belt 1 Review(s)

Unknown Or Other 4 Review(s)

Wheels 6 Review(s)