Car-and-Safety.com

Dodge Ram 2500 2008 Safety Reports and Reviews



Dodge Ram 2500 2008 Reviews



Dodge Ram 2500 2008 Engine And Engine Cooling Engine Diesel

Dodge Ram 2500 2008 Engine And Engine Cooling Engine Diesel Review #10215690

DODGE RAM 2500 2008 car safety problem was reported on Oct 03, 2007.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with ENGINE AND ENGINE COOLING:ENGINE:DIESEL . tl*the contact owns a 2008 dodge 2500. the contact stated that the oxygen sensor is defective. he has taken the vehicle to the dealer on nine occasions. the dealer advised him not to return because he was abusing the vehicle. daimler chrysler offered no assistance as well. the failure mileage was 11 and current mileage was 6,000. updated 03/04/08*lj updated .0 person(s) were injured. 0 person(s) died.Mileage was 11 miles. Vehicle Identification Number (VIN):3D7KS28A38G. Dodge Ram 2500 2008 problem was reported in OLMITO, TX. Original Owner. Vehicle was purchased on Oct 03, 2007. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Dodge Ram 2500 2008 drive type:4WD. FUEL SYSTEM:Turbo. FUEL TYPE: DIESEL. Dodge Ram 2500 2008 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 0 mph. DEALER'S NAME: BURT OGDEN . DEALER'S TELEPHONE NUMBER: 956-423-5555 . DEALER'S CITY: HARLINGEN . DEALER'S STATE CODE: TX. DEALER'S ZIPCODE: 78550 .

Dodge Ram 2500 2008 Steering Gear Box (other Than Rack And Pinion)

Dodge Ram 2500 2008 Steering Gear Box (other Than Rack And Pinion) Review #10221614

DODGE RAM 2500 2008 car safety problem was reported on Mar 16, 2008.DODGE RAM 2500 2008, manufactured by DAIMLERCHRYSLER CORPORATION had a problem with STEERING:GEAR BOX (OTHER THAN RACK AND PINION) . vehicle 2003, dodge ram 2500, diesel, 4x4, 54,000 miles steering box malfunction. difficult to maintain directional stability. replaced steering box. *tr .0 person(s) were injured. 0 person(s) died.Mileage was 54343 miles. Vehicle Identification Number (VIN):3D7KU28603G. Dodge Ram 2500 2008 problem was reported in SANDY, UT. Original Owner. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Dodge Ram 2500 2008 drive type:4WD. FUEL SYSTEM:Turbo. FUEL TYPE: DIESEL. Dodge Ram 2500 2008 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 65 mph.

Dodge Ram 2500 2008 Engine And Engine Cooling

Dodge Ram 2500 2008 Engine And Engine Cooling Review #10232940

DODGE RAM 2500 2008 car safety problem was reported on Apr 18, 2008.DODGE RAM 2500 2008, manufactured by CHRYSLER LLC had a problem with ENGINE AND ENGINE COOLING . dodge diesel turbo sooting up. can not even drive the truck without the turbo sooting up. goes back to the dealer every week or two. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 4396 miles. Vehicle Identification Number (VIN):3D7KS28A38G. Dodge Ram 2500 2008 problem was reported in ROSENBERG, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. FUEL SYSTEM:Turbo. FUEL TYPE: DIESEL. VEHICLE SPEED: 55 mph.

Dodge Ram 2500 2008 Engine And Engine Cooling Exhaust System

Dodge Ram 2500 2008 Engine And Engine Cooling Exhaust System Review #10238661

DODGE RAM 2500 2008 car safety problem was reported on Oct 18, 2007.DODGE RAM 2500 2008, manufactured by CHRYSLER LLC had a problem with ENGINE AND ENGINE COOLING:EXHAUST SYSTEM . i took delivery of my dodge 2500 mega cab pickup with the cummins 6.7 diesel motor. almost since the first day, i have had the truck back to the service department at the dealer for a failing emission system. the dpf and regeneration system is constantly clogging and rendering my vehicle undrivable. when this occurs, i return to the dealer, have the part cleaned, or replaced, and i am told that it will occur again. according to my dealers service manager, and dodge, there is no known fix for this problem. upon speaking to dodge customer service regarding a buyback of my vehicle, i have been hung up on, put on hold for hours, told my dealer has to buy it back, or told to hire a lawyer. when researching this matter, i have found that i am not alone with these types of problems with the new 6.7 dodge trucks. i need to know what recourse i have in this matter with dodge, or my dealer directly. *tr.Mileage was 0 miles. Vehicle Identification Number (VIN):3D3KS29A68G. Dodge Ram 2500 2008 problem was reported in OCEANPORT, NJ. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 5 mph.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10247919

DODGE RAM 2500 2008 car safety problem was reported on Nov 01, 2008.DODGE RAM 2500 2008, manufactured by CHRYSLER LLC had a problem with STEERING . i own an 08 dodge ram 2500 with approx 970 miles on the vehicle. after hitting a series of road bumps, the front end of the vehicle began to violently vibrate and wobble. i could barely control the vehicle due to a near lack of steering control. after completely stopping the vehicle, i resumed speed and the vehicle drove normally. when i got home i did an internet search on my vehicle symptoms and found that "dodge death wobble" yielded over 35k hits. there is a systemic problem with large ram trucks that, according to my research is not being adequately addressed. the dealer replaced the steering stabilizer - a common replacement according to my research. symptoms, however, continue to exist after this part is replaced - another common theme according to my research. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 965 miles. Vehicle Identification Number (VIN):3D3KS28A68G. Dodge Ram 2500 2008 problem was reported in LEAVENWORTH, KS. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 60 mph.

Dodge Ram 2500 2008 Engine And Engine Cooling Exhaust System

Dodge Ram 2500 2008 Engine And Engine Cooling Exhaust System Review #10251717

DODGE RAM 2500 2008 car safety problem was reported on Nov 18, 2008.DODGE RAM 2500 2008, manufactured by CHRYSLER LLC had a problem with ENGINE AND ENGINE COOLING:EXHAUST SYSTEM . epa driven dpf filter on cummins diesel 2008 2500 truck is always causing problems with check engine light. dealers have had to put a port on turbo, clean exhaust, wrap exhaust, and claim that customers are idling too much. pollution control devices are obviously bad design. they burn extra diesel in exhaust to burn soot and make mileage go down by 10mpg. 2006 to 2008 change lost significant mpg. the 6.7l engine needs addressing with final fixes that won't continue to make customers go to dealer over and over again for repairs. *tr.Mileage was 10000 miles. Dodge Ram 2500 2008 problem was reported in KATY, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2008 Engine And Engine Cooling Review #10255729

DODGE RAM 2500 2008 car safety problem was reported on Dec 01, 2008.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with ENGINE AND ENGINE COOLING . tl*the contact owns a 2008 dodge ram 2500. while performing regular maintenance on the vehicle, the contact found a defect in the egr cooler and firewall pad. the firewall installation pad made contact with the egr cooler on the engine, which could result in a fire. the manufacturer stated that they had no information for nhtsa campaign id number 08v641000 (engine and engine cooling:engine:diesel). the dealer stated that they could cut the installation out of the vehicle; however, the contact was hesitant to agree with that type of repair because it would affect the heating system in the vehicle. the failure and current mileages were less than 5,000. .0 person(s) were injured. 0 person(s) died.Mileage was 5000 miles. Vehicle Identification Number (VIN):3D7KS28A68G. Dodge Ram 2500 2008 problem was reported in MARRIOTSVILLE, WA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2008 Visibility

Dodge Ram 2500 2008 Visibility Review #10256651

DODGE RAM 2500 2008 car safety problem was reported on Jan 12, 2009.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with VISIBILITY . 2008 dodge ram 2500 heavy duty 4x4,diesel engine,quad-cab,short bed. the windshield wipers failed to work . when i first noticed the problem a couple of weeks ago i was leaving a car wash and just happened to turn the wipers to the"high" position on the switch and they stopped working right where they were on the windshield. i changed the switch back to the low speed and they started working again. i made an appointment with the dealership to have it fixed,while i was waiting for the day of my appointment the windshield wipers still would not function at all on the high setting, i looked in the owners manual to see if it was a fused item that maybe i just needed to replace a fuse and monitor further incase it was blowing the fuse for a reason , but there was no listing for the wipers in the fuse section of the owners manual, i then noticed the wipers were not working in all the positions on the switch intermittently some times they worked some times they didn't, and it didn't have a pattern of when they would work or not ,just if they came ,on they came on ,if not they wouldn't ,no matter how many times you turned the switch off and on or the truck off and on, once or twice they seemed to be moving slower than normal in the low setting then sped up to the right speed. my problem is with safety of it .here we are getting bad weather,ice ,snow rain ,salt spray from other drivers etc. and not knowing when or if they are going to fail is a safety issue ,you can drive all day use them ten times,then some car pass spray road grime all over your windshield and have them not work and loose total visibility. may even crash. i took my truck in on its appointment only to find three others there for the same reason... parts are on back order and no time line on when they will arrive and how long it takes to fix once it is dropped off , they said i could leave the truck or take it. no loaner vehicle or nothing . just here's your broken 4 month old , $46,000 truck back. *tr.Mileage was 8600 miles. Vehicle Identification Number (VIN):3D7KS28A68G. Dodge Ram 2500 2008 problem was reported in GRANITE CITY, IL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 5 mph.

Dodge Ram 2500 2008 Engine And Engine Cooling Engine Diesel

Dodge Ram 2500 2008 Engine And Engine Cooling Engine Diesel Review #10257355

DODGE RAM 2500 2008 car safety problem was reported on Jan 22, 2009.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with ENGINE AND ENGINE COOLING:ENGINE:DIESEL . tl*the contact owns a 2008 dodge 2500 megacab. the contact stated that the vehicle's turbo was failing, which occurs every three thousand miles. the check engine indicator illuminates due to carbon build up in the turbo because it was not being used. the contact and his wife were experiencing lethargic sickness every time they rode in the vehicle. the issue with the turbo has been occurring since march of 2008. the vehicle has been taken to the dealer twice for repairs and the contact feels that they do "band aid" work instead of properly repairing the carbon build-up. the contact feels that this is a safety issue because the vehicle emits fumes that leave the driver and passengers feeling nauseous. the current and failure mileages were 8,900. updated 3/9/09 *cn updated 03/11/09. *jb.0 person(s) were injured. 0 person(s) died.Mileage was 8900 miles. Vehicle Identification Number (VIN):3D3KS29AX8G. Dodge Ram 2500 2008 problem was reported in COLTON, CA. Original Owner. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. FUEL SYSTEM:Turbo. FUEL TYPE: DIESEL. VEHICLE SPEED: 0 mph. DEALER'S NAME: MOSS DODGE . DEALER'S CITY: SAN BERNARDINO . DEALER'S STATE CODE: CA. DEALER'S ZIPCODE: 92408 .

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10260822

DODGE RAM 2500 2008 car safety problem was reported on Mar 04, 2009.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . tl*the contact owns a 2008 dodge ram 2500. the contact received a recall notice for nhtsa campaign id number 09v005000 (steering:linkages:tie rod assembly) and immediately called the dealer. he was informed that he would have to wait four months for the parts because they were on back order. as a result, a loss of steering control could occur. the manufacturer did not assist. there had been no failure to date. the current mileage was 3,400. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS28A98G. Dodge Ram 2500 2008 problem was reported in COLORADO SPRINGS, CO. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2008 Steering Review #10261733

DODGE RAM 2500 2008 car safety problem was reported on Mar 01, 2008.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . tl*the contact owns a 2008 dodge ram 2500. the contact received a recall notice for nhtsa campaign id number 09e001000 (steering:linkages) and immediately called the dealer. a technician stated that the parts were unavailable and she would have to periodically check to see when they arrived. the contact resides 180 miles from the nearest dealer and they would not notify her when the parts become available nor place them on reserve. the manufacturer would not assist. the vehicle has not been repaired. the failure and current mileages were 10,000. .0 person(s) were injured. 0 person(s) died.Mileage was 10000 miles. Vehicle Identification Number (VIN):3D7KS28D78G. Dodge Ram 2500 2008 problem was reported in ALPINE, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2008 Steering Review #10261769

DODGE RAM 2500 2008 car safety problem was reported on Mar 01, 2009.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . tl*the contact owns a 2008 dodge ram 2500. the contact received a recall notice pertaining to the steering component on his vehicle. the dealer stated that the parts for the repair would be unavailable for several weeks because chrysler was only supplying two recall remedy kits per week. the nhtsa campaign id number was unknown. the current and failure mileages were less than 5,670. updated 4/14/09 *cn updated 04/17/09.*jb.0 person(s) were injured. 0 person(s) died.Mileage was 5670 miles. Vehicle Identification Number (VIN):3D7KS26D88G. Dodge Ram 2500 2008 problem was reported in GRANDBURY, TX. Original Owner. Vehicle was purchased on Oct 01, 2008. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Dodge Ram 2500 2008 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 0 mph. DEALER'S NAME: MIKE BROWN . DEALER'S TELEPHONE NUMBER: 817-279-1500 . DEALER'S CITY: GRANBURY . DEALER'S STATE CODE: TX. DEALER'S ZIPCODE: 76049 .

Dodge Ram 2500 2008 Steering Linkages Tie Rod Assembly

Dodge Ram 2500 2008 Steering Linkages Tie Rod Assembly Review #10261769

DODGE RAM 2500 2008 car safety problem was reported on Mar 01, 2009.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING:LINKAGES:TIE ROD ASSEMBLY . tl*the contact owns a 2008 dodge ram 2500. the contact received a recall notice pertaining to the steering component on his vehicle. the dealer stated that the parts for the repair would be unavailable for several weeks because chrysler was only supplying two recall remedy kits per week. the nhtsa campaign id number was unknown. the current and failure mileages were less than 5,670. updated 4/14/09 *cn updated 04/17/09.*jb.0 person(s) were injured. 0 person(s) died.Mileage was 5670 miles. Vehicle Identification Number (VIN):3D7KS26D88G. Dodge Ram 2500 2008 problem was reported in GRANDBURY, TX. Original Owner. Vehicle was purchased on Oct 01, 2008. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. Dodge Ram 2500 2008 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 0 mph. DEALER'S NAME: MIKE BROWN . DEALER'S TELEPHONE NUMBER: 817-279-1500 . DEALER'S CITY: GRANBURY . DEALER'S STATE CODE: TX. DEALER'S ZIPCODE: 76049 .

Dodge Ram 2500 2008 Engine And Engine Cooling Exhaust System

Dodge Ram 2500 2008 Engine And Engine Cooling Exhaust System Review #10261934

DODGE RAM 2500 2008 car safety problem was reported on Mar 03, 2009.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with ENGINE AND ENGINE COOLING:EXHAUST SYSTEM . multiple times every month obnoxious smell of burning chemicals in cab when dog filter on diesel goes through regen. chrysler replaced turbo that was sooted shut. then they wrapped exhaust. still does it. makes you sick. *tr.1 person(s) were injured. Mileage was 14590 miles. Dodge Ram 2500 2008 problem was reported in KATY, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 14 mph.

Dodge Ram 2500 2008 Engine And Engine Cooling Review #10261950

DODGE RAM 2500 2008 car safety problem was reported on Apr 04, 2008.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with ENGINE AND ENGINE COOLING . my husband and i bought a new 2008 dodge ram 2500 diesel a year ago. within the first 500 miles the check engine light came on. we called the dealer and were told this was normal and not to worry, just drive the truck, stop, turn it off, restart and drive it, until the light goes off. the light turned off the next time we started the truck, so we figured it was ok, maybe we were overreacting. well a month later it happens again, we called the dealership and were told the same thing, don't worry, just start it, drive, turn it off, and turn it back on. we took the truck in the third time this happened, they told us it was no big deal, that this was "a normal problem" and the emissions sensor just needed a cleaning, which they did. we were told when we picked it up that everything was fine, but two weeks later it happened again, we took it back to the shop and they cleaned the sensor again. right after we got the truck back, we had absolutely no power, it struggled to get up a small hill, we took it back to the shop, and they held it for four days. when we got it back they told us there was absolutely nothing wrong with it, but the next time this happened bring it right back and they would replace the turbo and the emissions sensor again. we have only owned this truck for a year, and i have called dodge with my complaint but was told to email the complain, and when i emailed it, i was told to call, which to me seems like a run around. we were told by the mechanic at the dealer this was a ongoing issue but there was nothing he could do about it, except for continuing to clean the sensors or replacing the turbo, which will still not stop the problem. *tr.Vehicle Identification Number (VIN):3D7KS28AX8G. Dodge Ram 2500 2008 problem was reported in LEBANON, OR. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. FUEL TYPE: DIESEL.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10262006

DODGE RAM 2500 2008 car safety problem was reported on Mar 13, 2009.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . tl*the contact owns a 2008 dodge ram 2500. on march 13, 2009, the contact received a recall notice regarding the steering drag link inner joint and damper bracket. he called every dealer in texas and none of them have the part available for the repair due to a national back order from chrysler. the recall stated that if the part is not replaced, a loss of steering control could occur without warning and cause a crash. the nhtsa campaign id number was unknown. there had been no failure to date. the current mileage was 7,700. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS29A98G. Dodge Ram 2500 2008 problem was reported in LUMBERTON, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2008 Seats

Dodge Ram 2500 2008 Seats Review #10262718

DODGE RAM 2500 2008 car safety problem was reported on Oct 10, 2008.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with SEATS . at about 4500 miles notice that my right leg was rubbing the frame of the seat has time went on it got worse. the framing and springs have lost all support and have caused bruising on my leg if i drive for an extended period of time i can not drive without being in pain. the dealer has replaced the foam but the problem is in the seat framing. it lacks support. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 4500 miles. Dodge Ram 2500 2008 problem was reported in CYNTHIANA, KY. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2008 Steering Linkages Tie Rod Assembly

Dodge Ram 2500 2008 Steering Linkages Tie Rod Assembly Review #10264569

DODGE RAM 2500 2008 car safety problem was reported on Oct 30, 2008.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING:LINKAGES:TIE ROD ASSEMBLY . 2008 dodge ram 2500 had a problem with the steering control due to a faulty part. consumer states that he received a recall for the part that caused the accident after being told previously there was no faulty part. *nj the mechanic informed the consumer the stud which held the tie rod end to the pitman arm was broken in a location which caused the vehicle to go out of control. *jb.Vehicle was involved in a crash. Vehicle Identification Number (VIN):3D7KS28D98G. Dodge Ram 2500 2008 problem was reported in DILLARD, GA. Accident was reported to Police. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS.

Dodge Ram 2500 2008 Steering Review #10264065

DODGE RAM 2500 2008 car safety problem was reported on Feb 28, 2009.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . tl*the contact owns a 2008 dodge ram 2500. the contact received a recall notice from dodge regarding the steering drag link inner joint and damper brackets. these components control the steering wheel and may fracture, causing a loss of steering control. the dealer stated that the parts were unavailable for the repair and it would take an additional two months for the parts to arrive. the nhtsa campaign id number was unknown. the failure mileage was 1,400..0 person(s) were injured. 0 person(s) died.Mileage was 1400 miles. Vehicle Identification Number (VIN):3D7KS28DX8G. Dodge Ram 2500 2008 problem was reported in CHUGIAK, AK. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2008 Power Train Driveline Universal Joint

Dodge Ram 2500 2008 Power Train Driveline Universal Joint Review #10264210

DODGE RAM 2500 2008 car safety problem was reported on Mar 20, 2009.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with POWER TRAIN:DRIVELINE:UNIVERSAL JOINT . tl*the contact owns a 2008 dodge ram 2500. while driving 35 mph, the driver's side u-joint axle failed, which jammed the steering wheel to the right. the contact crashed the vehicle into a telephone pole. he was not injured and a police report was filed. the vehicle was towed to a repair shop. the dealer advised him to call the dodge manufacturer and his insurance company. the manufacturer sent an investigator to inspect the vehicle. the contact then received a letter stating that the failure occurred after he struck the telephone pole; however, he stated that the axle failed prior to the crash. the vehicle is currently being repaired. the failure mileage was 26,177. the consumer believed the u-joints failed due to lack of grease. when the u-joint broke, the axles binded with each other and the axle jammed the spindle making it difficult to steer the vehicle back to the center. . the consumer complained of a noise days prior to the accident, but was told nothing was wrong. updated 04/22/09.*jb updated 05/04/09 *bf the consumer stated he heard a banging noise in the left front of the vehicle. right after the noise, the steering went to the right and he jumped the curb. after the accident, the consumer noticed 2 parts from his vehicle were on the street. the parts were 2 ears off the left front axle u-joint. one was male and the other was a female and they were stuck together. updated 05/04/09.*jb.Vehicle was involved in a crash. 0 person(s) were injured. 0 person(s) died.Mileage was 26177 miles. Vehicle Identification Number (VIN):3D7KS28DX8G. Dodge Ram 2500 2008 problem was reported in EYNON, PA. Accident was reported to Police. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. FUEL SYSTEM:Fuel injection. FUEL TYPE: GAS. VEHICLE SPEED: 35 mph.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10270150

DODGE RAM 2500 2008 car safety problem was reported on May 23, 2009.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . steering linkage broke while driving at highway speeds, lost control and went across oncoming lane. learned of recall after the incident. was never contacted by dealership of purchase in regards to this specific recall. *tr.Mileage was 25669 miles. Dodge Ram 2500 2008 problem was reported in SAN DIEGO, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 55 mph.

Dodge Ram 2500 2008 Steering Linkages Tie Rod Assembly

Dodge Ram 2500 2008 Steering Linkages Tie Rod Assembly Review #10273314

DODGE RAM 2500 2008 car safety problem was reported on Mar 02, 2009.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING:LINKAGES:TIE ROD ASSEMBLY . tl*the contact owns a 2008 dodge ram 2500. the contact received a recall notice for nhtsa campaign id number 09v005000 (steering:linkages:tie rod assembly) and immediately called the dealer. he was informed that the part for the remedy was on backorder. the failure has not been remedied properly. the current mileage was 10,000. .0 person(s) were injured. 0 person(s) died.Mileage was 10000 miles. Vehicle Identification Number (VIN):3D7KS28D88G. Dodge Ram 2500 2008 problem was reported in HUNGRY HORSE, MT. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2008 Electronic Stability Control

Dodge Ram 2500 2008 Electronic Stability Control Review #10274047

DODGE RAM 2500 2008 car safety problem was reported on June 15, 2009.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with ELECTRONIC STABILITY CONTROL . i have a 2008 dodge durango and i had the same problem when it hit a bump you almost lose control and i did not think it should do that. i was on my way to the store when it happen and the car will almost jump into another lane this have to be some kind of defect on this car. *tr.Dodge Ram 2500 2008 problem was reported in FORT MILL, SC. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 50 mph.

Dodge Ram 2500 2008 Suspension

Dodge Ram 2500 2008 Suspension Review #10274047

DODGE RAM 2500 2008 car safety problem was reported on June 15, 2009.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with SUSPENSION . i have a 2008 dodge durango and i had the same problem when it hit a bump you almost lose control and i did not think it should do that. i was on my way to the store when it happen and the car will almost jump into another lane this have to be some kind of defect on this car. *tr.Dodge Ram 2500 2008 problem was reported in FORT MILL, SC. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 50 mph.

Dodge Ram 2500 2008 Suspension Front

Dodge Ram 2500 2008 Suspension Front Review #10275392

DODGE RAM 2500 2008 car safety problem was reported on June 28, 2009.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with SUSPENSION:FRONT . i own a 2008 dodge 2500. im having what people are calling "death wobble" my local dealer, colorado springs dodge says there is nothig wrong with my truck and i should replace my tires. they want to wash their hands of this and place blame on someone else. *tr.Mileage was 25000 miles. Vehicle Identification Number (VIN):3D7KS28D58G. Dodge Ram 2500 2008 problem was reported in COLORADO SPRINGS, CO. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 50 mph.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10276003

DODGE RAM 2500 2008 car safety problem was reported on Apr 08, 2009.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . safety recall h36 involves steering linkage. "this could result in a loss of steering control and cause a crash without warning." chrysler is only allocating one recall kit per week to my dealer, who has a list of over 300 affected customers. at this rate, chrysler is willing forego safety for 5.75 years! deplorable. i called chrysler, who said they needed the part and order number of my dealer. i contacted my service department on the other line, who explained that it is impossible for them to order the part for a campaign allotment. i've been calling on this since april. *tr.Mileage was 28000 miles. Vehicle Identification Number (VIN):3D3KS29A68G. Dodge Ram 2500 2008 problem was reported in GRAND JUNCTION, CO. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering Review #10281956

DODGE RAM 2500 2008 car safety problem was reported on June 01, 2009.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . i have an 08 dodge 2500 4x4 diesel. when i go over 60mph and hit a bump it does that "death wobble" it does it every time i even hit an imperfection in the highway, i replaced the steering damper/stabilizer, and dodge replaced all 4 ball joints at only 34,000 miles. but it still does it, even worse at times.i haven't wrecked or anything i just have to slow down to about 40 mph to get it to stop. that is very dangerous when the speed limit is 75 mph. i drive all around the country for work, and this occurs every single time i drive it. the truck is only about 8 months old. i bought it brand new. *tr.Mileage was 33000 miles. Vehicle Identification Number (VIN):3D7KS28A08G. Dodge Ram 2500 2008 problem was reported in PADEN, OK. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. FUEL TYPE: DIESEL. VEHICLE SPEED: 65 mph.

Dodge Ram 2500 2008 Structure Frame And Members

Dodge Ram 2500 2008 Structure Frame And Members Review #10281956

DODGE RAM 2500 2008 car safety problem was reported on June 01, 2009.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STRUCTURE:FRAME AND MEMBERS . i have an 08 dodge 2500 4x4 diesel. when i go over 60mph and hit a bump it does that "death wobble" it does it every time i even hit an imperfection in the highway, i replaced the steering damper/stabilizer, and dodge replaced all 4 ball joints at only 34,000 miles. but it still does it, even worse at times.i haven't wrecked or anything i just have to slow down to about 40 mph to get it to stop. that is very dangerous when the speed limit is 75 mph. i drive all around the country for work, and this occurs every single time i drive it. the truck is only about 8 months old. i bought it brand new. *tr.Mileage was 33000 miles. Vehicle Identification Number (VIN):3D7KS28A08G. Dodge Ram 2500 2008 problem was reported in PADEN, OK. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. FUEL TYPE: DIESEL. VEHICLE SPEED: 65 mph.

Dodge Ram 2500 2008 Suspension Front

Dodge Ram 2500 2008 Suspension Front Review #10281956

DODGE RAM 2500 2008 car safety problem was reported on June 01, 2009.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with SUSPENSION:FRONT . i have an 08 dodge 2500 4x4 diesel. when i go over 60mph and hit a bump it does that "death wobble" it does it every time i even hit an imperfection in the highway, i replaced the steering damper/stabilizer, and dodge replaced all 4 ball joints at only 34,000 miles. but it still does it, even worse at times.i haven't wrecked or anything i just have to slow down to about 40 mph to get it to stop. that is very dangerous when the speed limit is 75 mph. i drive all around the country for work, and this occurs every single time i drive it. the truck is only about 8 months old. i bought it brand new. *tr.Mileage was 33000 miles. Vehicle Identification Number (VIN):3D7KS28A08G. Dodge Ram 2500 2008 problem was reported in PADEN, OK. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. FUEL TYPE: DIESEL. VEHICLE SPEED: 65 mph.

Dodge Ram 2500 2008 Engine And Engine Cooling Exhaust System

Dodge Ram 2500 2008 Engine And Engine Cooling Exhaust System Review #10286925

DODGE RAM 2500 2008 car safety problem was reported on Oct 08, 2009.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with ENGINE AND ENGINE COOLING:EXHAUST SYSTEM . on my 2008 dodge ram 2500 diesel pickup truck sometimes when you accelerate, there is little to no response except black smoke billowing from the exhaust. you have to press the accelerator completely to the floor to get any response, and then it will only do maybe 5-10 mph. maximum. this happens at random times, and there seems to be no way to predict when it will happen. it happens from a stopped position, as well as accelerating to pass a vehicle at highway speeds. in the case of highway (passing a vehicle) speed, the engine will lose power, but will not completely quit. in either case, you must pull over, turn off the vehicle, and restart it for it to perform normally. this problem first began in late july, 2009. i took the truck to the dealer for repairs on august 14th. 2009. according to the work order (invoice), they replaced a particulate filter, and did a turbo test. the check engine light came back on about 3.5 miles after i left the dealer, and the truck was billowing heavy black smoke. when i took it back to the dealer for the same repair, i was told they were going to do the same thing. a new filter, and a turbo test. they did not have a filter in stock, so they did not make any repairs, and they told me they did not expect this to repair the problem anyway, as it had no affect the last time they did it. the latest incident occurred on october 8, 2009. *tr.Mileage was 18000 miles. Vehicle Identification Number (VIN):3D7KR28A48G. Dodge Ram 2500 2008 problem was reported in DOTHAN, AL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. FUEL TYPE: DIESEL. VEHICLE SPEED: 5 mph.

Dodge Ram 2500 2008 Engine And Engine Cooling Engine

Dodge Ram 2500 2008 Engine And Engine Cooling Engine Review #10286925

DODGE RAM 2500 2008 car safety problem was reported on Oct 08, 2009.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with ENGINE AND ENGINE COOLING:ENGINE . on my 2008 dodge ram 2500 diesel pickup truck sometimes when you accelerate, there is little to no response except black smoke billowing from the exhaust. you have to press the accelerator completely to the floor to get any response, and then it will only do maybe 5-10 mph. maximum. this happens at random times, and there seems to be no way to predict when it will happen. it happens from a stopped position, as well as accelerating to pass a vehicle at highway speeds. in the case of highway (passing a vehicle) speed, the engine will lose power, but will not completely quit. in either case, you must pull over, turn off the vehicle, and restart it for it to perform normally. this problem first began in late july, 2009. i took the truck to the dealer for repairs on august 14th. 2009. according to the work order (invoice), they replaced a particulate filter, and did a turbo test. the check engine light came back on about 3.5 miles after i left the dealer, and the truck was billowing heavy black smoke. when i took it back to the dealer for the same repair, i was told they were going to do the same thing. a new filter, and a turbo test. they did not have a filter in stock, so they did not make any repairs, and they told me they did not expect this to repair the problem anyway, as it had no affect the last time they did it. the latest incident occurred on october 8, 2009. *tr.Mileage was 18000 miles. Vehicle Identification Number (VIN):3D7KR28A48G. Dodge Ram 2500 2008 problem was reported in DOTHAN, AL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. FUEL TYPE: DIESEL. VEHICLE SPEED: 5 mph.

Dodge Ram 2500 2008 Air Bags

Dodge Ram 2500 2008 Air Bags Review #10290413

DODGE RAM 2500 2008 car safety problem was reported on Sept 14, 2009.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with AIR BAGS . i was parked in a field and both driver side and passenger side air bag deployed. the pickup engine was running, the vehicle not moving at the time of deployment. i am the primary driver of this pickup and it has not been involved in any type of accidents. *tr.Mileage was 72000 miles. Vehicle Identification Number (VIN):3D7KS28A88G. Dodge Ram 2500 2008 problem was reported in CROOKSTON, MN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2008 Power Train

Dodge Ram 2500 2008 Power Train Review #10291073

DODGE RAM 2500 2008 car safety problem was reported on Oct 28, 2009.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with POWER TRAIN . when the truck is started and put into gear, the truck will roll about 10 feet and then take off. the driver has to stand on the brakes to get it to stop. the problem is intermittent and tends to occur after it sets for more than 8 hours. it only happens during the first 3 -5 minutes after startup. if driver is unaware of problem it could easily lead to damage to others as it requires a great deal of force to get the truck to stop.*tr.Mileage was 29000 miles. Vehicle Identification Number (VIN):3D7KS28A58G. Dodge Ram 2500 2008 problem was reported in CHANTILLY, VA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 3 mph.

Dodge Ram 2500 2008 Equipment

Dodge Ram 2500 2008 Equipment Review #10291077

DODGE RAM 2500 2008 car safety problem was reported on Oct 25, 2009.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with EQUIPMENT . went to take off from a stoplight and when i accelerated to 1500 rpm the exhaust brake engaged and prevented me from increasing speed. i had to let off the accelerator and gently accelerate in order to get the truck moving. once going, anytime i tried to increase speed, the exhaust brake would engage and slow down the vehicle. i had to pull off the road, shut off the vehicle, and then restart. this seemed to take care of the problem.. it only happened once but it was at a busy intersection. *tr.Mileage was 29000 miles. Vehicle Identification Number (VIN):3D7KS28A58G. Dodge Ram 2500 2008 problem was reported in CHANTILLY, VA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 10 mph.

Dodge Ram 2500 2008 Suspension

Dodge Ram 2500 2008 Suspension Review #10293182

DODGE RAM 2500 2008 car safety problem was reported on Nov 28, 2008.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with SUSPENSION . my truck shakes violently when i hit imperfections in the road. it happens 3 or more times a week. i have to stop my truck to get the shaking to cease. i have had it to the dealer more than once for the problem. they could not "replicate the problem" the first two times. the third time i drove and the service man rode with me. they determined it was the tires that were causing the problem. they said tires were not covered in the warranty. so it looks like i get to fork over a grand for new tires. *tr.Mileage was 10000 miles. Dodge Ram 2500 2008 problem was reported in SEMINOLE, OK. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 70 mph.

Dodge Ram 2500 2008 Engine And Engine Cooling Exhaust System

Dodge Ram 2500 2008 Engine And Engine Cooling Exhaust System Review #10296307

DODGE RAM 2500 2008 car safety problem was reported on May 10, 2009.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with ENGINE AND ENGINE COOLING:EXHAUST SYSTEM . exhaust leak into cab of truck is a diesel and actually makes you ill when riding in it. 4 attempts by dealer have failed to rectify problem. i placed a co meter in cab and it went off the scale which goes to 99 ppm. *tr.Mileage was 420 miles. Vehicle Identification Number (VIN):3D7KS28A48G. Dodge Ram 2500 2008 problem was reported in PACIFICA, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10298890

DODGE RAM 2500 2008 car safety problem was reported on Apr 28, 2009.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . steering wandering started days before then the dreaded death wobble. started happening st 70 mph then 60 mph now i cant drive over 55 mph with out it happening. *tr.Mileage was 40000 miles. Vehicle Identification Number (VIN):3D7KS28A08G. Dodge Ram 2500 2008 problem was reported in LAPLACE, LA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 70 mph.

Dodge Ram 2500 2008 Seat Belts

Dodge Ram 2500 2008 Seat Belts Review #10300171

DODGE RAM 2500 2008 car safety problem was reported on Mar 01, 2009.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with SEAT BELTS . passenger side seat belt locks and continues to tighten under normal driving conditions. passenger must release seat belt and return to "home" position before applying seat belt. any time you have to remove the seat belt while moving, you are at an increased risk for injury/death. i have been to the dealership and have had this part replaced twice. i have a total of 9 hours wait time trying to remedy this problem at the dealership. *tr.Mileage was 15000 miles. Vehicle Identification Number (VIN):3D7KS28A68G. Dodge Ram 2500 2008 problem was reported in FLORENCE, SC. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 25 mph.

Dodge Ram 2500 2008 Vehicle Speed Control

Dodge Ram 2500 2008 Vehicle Speed Control Review #10315243

DODGE RAM 2500 2008 car safety problem was reported on Jan 05, 2009.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with VEHICLE SPEED CONTROL . tl*the contact owns a 2008 dodge ram 2500. the throttle was sticking intermittently primarily when the air conditioner was on. the vehicle also idled excessively when sitting still. he has taken the vehicle to six dealers and they all said that there was no failure. the manufacturer also sent a representative to look at the vehicle and they could not duplicate or diagnose the failure. the vin was unknown. the failure mileage was 40,000..Mileage was 40000 miles. Dodge Ram 2500 2008 problem was reported in HUNGTINGTON BEACH, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2008 Steering Linkages Tie Rod Assembly

Dodge Ram 2500 2008 Steering Linkages Tie Rod Assembly Review #10315638

DODGE RAM 2500 2008 car safety problem was reported on Mar 01, 2010.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING:LINKAGES:TIE ROD ASSEMBLY . tl*the contact owns a 2008 dodge ram 2500. while driving 45 mph she noticed that the vehicle was not driving in a straight line, it swerved to the left without her touching the steering wheel. she parked the vehicle and noticed that the left front tire was turning and the right front tire was not. the vehicle was towed to the dealer. the dealer stated the front tie rod failed and it came out of the ball joint. the vehicle will be repaired. the failure and the current mileages were 41,000. .Mileage was 41000 miles. Vehicle Identification Number (VIN):3D7KS28D08G. Dodge Ram 2500 2008 problem was reported in REEDES, PA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 45 mph.

Dodge Ram 2500 2008 Power Train Automatic Transmission

Dodge Ram 2500 2008 Power Train Automatic Transmission Review #10316722

DODGE RAM 2500 2008 car safety problem was reported on June 24, 2008.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with POWER TRAIN:AUTOMATIC TRANSMISSION . my 2008, 2500 dodge truck 4x4 diesel has a bad jerking problem when you let off the fuel and then put it on again. the dealers have changed turbo, wire harnesses, all sensors, egr......... this has been going on since 7000 miles on truck. i have now 47,000. everyone including the dealer has said all 2008's do this and it is the factory's problem. *tr.Mileage was 7000 miles. Vehicle Identification Number (VIN):3D7KS28A88G. Dodge Ram 2500 2008 problem was reported in HELENA, MT. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Dodge Ram 2500 2008 drive type:4WD. FUEL TYPE: DIESEL. VEHICLE SPEED: 35 mph.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10317417

DODGE RAM 2500 2008 car safety problem was reported on Mar 01, 2010.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6). i own a 2008 dodge ram 2500 heavy duty pickup on march 1, 2010 at 6:15 going down w main street a straight road my vehicle lost steering control and started to veer to the left into the opposing lane and then to go off road. i was driving at apprx 20-25 miles per hr . i have learned there is a recall h46 thru chrysler but they are telling me my vehicles dirty and warranty ran out at 36,000 miles i have 46,000 miles. i have had many conversations with chrysler and they tell me to go thru my insurance the say i hit curb. that only happened after the fact that the steering had no control . i was told by the dealer paul service person that it has a recall for something within a part in the steering linkage but it will not be covered and chrysler has a new or redesigned steering linkage that can only be purchased $1350.00. the recall states during a prior service appt a mopar service part steering linkage may been installed on your truck [xxx] the drag link inner joint may fracture under certain driving conditions this could result in a loss of steering which cause a crash without warning also steering damper bracket at the tie rod may loosen ,the legal department at chrysler is where my claim is there # is 1 248 944-7084 and they are sending a inspector to look at this [xxx]. please help me i have missed 2 days of work and have no vehicle or rental and my twin daughters that are 12 have to walk home from bus stop about a half mile on a country road, not safe please help me ! [xxx] *tr .Vehicle was involved in a crash. Mileage was 41000 miles. Vehicle Identification Number (VIN):3D7KS28D08G. Dodge Ram 2500 2008 problem was reported in REERDERS, PW. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 25 mph.

Dodge Ram 2500 2008 Power Train Driveline

Dodge Ram 2500 2008 Power Train Driveline Review #10328013

DODGE RAM 2500 2008 car safety problem was reported on Apr 28, 2010.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with POWER TRAIN:DRIVELINE . started with a rattle coming from the front end. rattles whenever you drive it.. i can't say what the outcome would have been had i let the u-joint fail. dealer replaced the universal joint,front axle shaft. don't know what became of old part. *tr.Mileage was 58415 miles. Vehicle Identification Number (VIN):3D7KS28AX8G. Dodge Ram 2500 2008 problem was reported in GOODRICH, MI. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Engine And Engine Cooling Engine

Dodge Ram 2500 2008 Engine And Engine Cooling Engine Review #10328333

DODGE RAM 2500 2008 car safety problem was reported on Mar 22, 2009.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with ENGINE AND ENGINE COOLING:ENGINE . vehicle has experienced sudden loss of power numerous times. creates a hazardous safety situation when it's impossible to accelerate into/with traffic. five attempts to repair this problem have been made since march, 2009. *tr.Mileage was 12000 miles. Vehicle Identification Number (VIN):WD0PE845885. Dodge Ram 2500 2008 problem was reported in APOPKA, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 70 mph.

Dodge Ram 2500 2008 Suspension

Dodge Ram 2500 2008 Suspension Review #10332525

DODGE RAM 2500 2008 car safety problem was reported on May 27, 2010.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with SUSPENSION . i purchased a 2008 dodge 2500 ram 4x4 new off the floor. it now has 46,700 miles and the left upper ball joint is shot. failed inspection. expensive repair and part replaced. on a heavy duty truck the ball joints should not fail with less than 50,000 miles. potential steering and safety issue - is this a trend with dodge trucks? *tr.Mileage was 46700 miles. Vehicle Identification Number (VIN):3D7KS29D78G. Dodge Ram 2500 2008 problem was reported in CONCORD, VA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Dodge Ram 2500 2008 drive type:4WD.

Dodge Ram 2500 2008 Power Train Manual Transmission

Dodge Ram 2500 2008 Power Train Manual Transmission Review #10334270

DODGE RAM 2500 2008 car safety problem was reported on June 01, 2010.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with POWER TRAIN:MANUAL TRANSMISSION . on a 2008, 2500 ram diesel with a manual transmission, failed to engage in gear while towing. first time (june 2008) the transmission failed the vehicle had approx. 10,000 miles and would not shift to lower gears. i took it to dealer who said nothing was wrong. truck is now at dealer with over 17000 miles and they say it now needs a new clutch. yesterday while towing vehicle failed to downshift and every stop the truck had to be shut down to engage transmission. the vehicle also launches forward while the clutch is depressed after i get it in gear. i have less then 18000 miles on the truck and 15000 miles are highway miles a clutch should not fail without having something else wrong. i was with a friend of mine, who is a diesel tech. when the transmission failed to engage, he said he believed it was the hydraulic system failing to engage the clutch. yesterday while making a left turn, in the middle of a intersection i had to shut the vehicle off and engage the transmission. i was lucky no cars were behind me and the light had changed to green for the cross traffic who had to wait until i turned the truck off to engage the gears and restart the truck. *tr.Mileage was 17700 miles. Vehicle Identification Number (VIN):3D7KS28A68G. Dodge Ram 2500 2008 problem was reported in ALBUQUERQUE, NM. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. FUEL TYPE: DIESEL. Dodge Ram 2500 2008 TRANSMISSION TYPE: MAN . VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2008 Suspension Front

Dodge Ram 2500 2008 Suspension Front Review #10334943

DODGE RAM 2500 2008 car safety problem was reported on May 20, 2010.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with SUSPENSION:FRONT . i have a 2008 dodge ram 2500 with cummins diesel. this truck is completely stock and has the notorious death wobble. the shaking is extremely violent and starts when i hit a small bump at highway speeds of 65 mph. it has happened apr. 20 times in the last three weeks and typically i have to slow down to as low as 20 mph to get it to stop shaking. i have had it to the dealership twice with no improvement. they tell me everything is ok and that they have never heard of such a problem. it wasn't until i did some research on the internet and discovered that it is a substantial complaint with many truck owners. why has there not been a safety recall or further investigation by the nhtsa? believe me, this is a very serious and unsafe condition. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 29000 miles. Vehicle Identification Number (VIN):3D7KS28A08G. Dodge Ram 2500 2008 problem was reported in CLOVERDALE, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. FUEL TYPE: DIESEL. VEHICLE SPEED: 65 mph.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10336526

DODGE RAM 2500 2008 car safety problem was reported on Nov 18, 2008.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . my truck shakes violently when i hit imperfections in the road. it happens 3 or more times a week. i have to stop my truck to get the shaking to cease. i have had it to the dealer more than once for the problem. they could not "replicate the problem" the first two times. the third time i drove and the service man rode with me. they determined it was the tires that were causing the problem. they said tires were not covered in the warranty. i bought new tires and that did not fix the problem. took the truck back to them, they said dodge told them" that there was no known fix for this problem." and for them to "just put a new steering damper on to see what that does." that only put a bandaid on the problem. now the "death wobble" is back, and im past my warranty. just like they wanted to begin with. i got the truck on 7/4/08, the first occurrence was 11/18/08 when the truck had only 11,000 miles on it. *tr.Mileage was 11000 miles. Vehicle Identification Number (VIN):3D7KS28A98G. Dodge Ram 2500 2008 problem was reported in SEMINOLE, OK. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 65 mph.

Dodge Ram 2500 2008 Suspension Front

Dodge Ram 2500 2008 Suspension Front Review #10336526

DODGE RAM 2500 2008 car safety problem was reported on Nov 18, 2008.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with SUSPENSION:FRONT . my truck shakes violently when i hit imperfections in the road. it happens 3 or more times a week. i have to stop my truck to get the shaking to cease. i have had it to the dealer more than once for the problem. they could not "replicate the problem" the first two times. the third time i drove and the service man rode with me. they determined it was the tires that were causing the problem. they said tires were not covered in the warranty. i bought new tires and that did not fix the problem. took the truck back to them, they said dodge told them" that there was no known fix for this problem." and for them to "just put a new steering damper on to see what that does." that only put a bandaid on the problem. now the "death wobble" is back, and im past my warranty. just like they wanted to begin with. i got the truck on 7/4/08, the first occurrence was 11/18/08 when the truck had only 11,000 miles on it. *tr.Mileage was 11000 miles. Vehicle Identification Number (VIN):3D7KS28A98G. Dodge Ram 2500 2008 problem was reported in SEMINOLE, OK. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 65 mph.

Dodge Ram 2500 2008 Power Train

Dodge Ram 2500 2008 Power Train Review #10339458

DODGE RAM 2500 2008 car safety problem was reported on June 19, 2010.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with POWER TRAIN . this is the second time this problem happened in 7 months. i was sitting at a light and started to accelerate, the exhaust brake engaged and prevented me from moving forward. i was able to move by slightly depressing the accelerator a little at a time. when i approached my next traffic light, the engine rpm dropped to 500 and then shot up to 1200 rpms. when this happened the truck lurched forward and almost hit a pedestrian in the crosswalk. it also put me half way into a busy intersection. there were multiple close calls that could have caused injury or death. the truck is currently at the dealer again but i am very concerned about this issue. it seems i am not the only person this has happened to. *tr.Mileage was 42000 miles. Vehicle Identification Number (VIN):3D7KS28A58G. Dodge Ram 2500 2008 problem was reported in CHANTILLY, VA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2008 Engine And Engine Cooling Exhaust System

Dodge Ram 2500 2008 Engine And Engine Cooling Exhaust System Review #10339458

DODGE RAM 2500 2008 car safety problem was reported on June 19, 2010.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with ENGINE AND ENGINE COOLING:EXHAUST SYSTEM . this is the second time this problem happened in 7 months. i was sitting at a light and started to accelerate, the exhaust brake engaged and prevented me from moving forward. i was able to move by slightly depressing the accelerator a little at a time. when i approached my next traffic light, the engine rpm dropped to 500 and then shot up to 1200 rpms. when this happened the truck lurched forward and almost hit a pedestrian in the crosswalk. it also put me half way into a busy intersection. there were multiple close calls that could have caused injury or death. the truck is currently at the dealer again but i am very concerned about this issue. it seems i am not the only person this has happened to. *tr.Mileage was 42000 miles. Vehicle Identification Number (VIN):3D7KS28A58G. Dodge Ram 2500 2008 problem was reported in CHANTILLY, VA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2008 Air Bags Frontal

Dodge Ram 2500 2008 Air Bags Frontal Review #10346951

DODGE RAM 2500 2008 car safety problem was reported on July 25, 2010.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with AIR BAGS:FRONTAL . my 2008 dodge ram 2500 was involved in a head on collision in which neither the driver nor the passenger side airbag deployed. speed of impact was aprox. 50-55 mph. *tr.Vehicle was involved in a crash. 2 person(s) were injured. 0 person(s) died.Mileage was 48000 miles. Dodge Ram 2500 2008 problem was reported in HILLSBORO, OR. Accident was reported to Police. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 50 mph.

Dodge Ram 2500 2008 Suspension Front

Dodge Ram 2500 2008 Suspension Front Review #10350298

DODGE RAM 2500 2008 car safety problem was reported on Aug 14, 2010.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with SUSPENSION:FRONT . when you run over a bump or seam in the road with the right front tire and then immediately after with the left front tire, the front of the truck starts bouncing uncontrollably until the speed of the truck is reduced drastically. this occurs with speeds between 55 and 80 mph. it occurs approximately once per month, you never know the next time it happens. the ball joints and steering box were rebuilt with new numbered parts and has not corrected the front suspension problem. *tr .Mileage was 100 miles. Vehicle Identification Number (VIN):3D7KS28AX8G. Dodge Ram 2500 2008 problem was reported in PLEASANT HILL, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 65 mph.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10351820

DODGE RAM 2500 2008 car safety problem was reported on Aug 16, 2010.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . the steering idler arm popped loose from the pitman arm right gear at the steering rendering the steering completely useless . *tr.Mileage was 60000 miles. Vehicle Identification Number (VIN):3D3KS28AX8G. Dodge Ram 2500 2008 problem was reported in PAYSON, AZ. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 15 mph.

Dodge Ram 2500 2008 Suspension Front Wheel Bearing

Dodge Ram 2500 2008 Suspension Front Wheel Bearing Review #10355294

DODGE RAM 2500 2008 car safety problem was reported on Oct 26, 2009.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with SUSPENSION:FRONT:WHEEL BEARING . tl* the contact owns a 2008 dodge 2500 diesel. the contact stated that the wheel bearing was wearing prematurely. the wheel bearing were replaced less than 20,000 miles ago and needed a second replacement. the contact believed the failure to be a defect because the bearings failed twice with very little mileage on the vehicle. the dealer stated that the component was not under recall. the failure mileage was 34,000 and the current mileage was 54,000..Mileage was 34000 miles. Vehicle Identification Number (VIN):3D7KS28A88G. Dodge Ram 2500 2008 problem was reported in APPLE GROVE, WV. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2008 Suspension Front Review #10355971

DODGE RAM 2500 2008 car safety problem was reported on May 15, 2010.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with SUSPENSION:FRONT . i was driving my 2008 dodge ram 2500 (gas) coming into town and slowed down to approx. 50 mph and hit a small bump in the road. the truck began to shake violently and i thought the whole front end had fallen apart. luckily i was able to pull over without causing an accident. i checked over truck and could find nothing obviously wrong. took it to dodge dealer and they said they could find nothing wrong with truck and that they had never heard of this type of complaint. i now believe this to be a lie after reading so many other similar complaints. this problem will kill some one soon if dodge continues to ignore these complaints. my heart took about an hour to settle down i was so terrified. *tr.Dodge Ram 2500 2008 problem was reported in OLDS, 00. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 50 mph.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10356688

DODGE RAM 2500 2008 car safety problem was reported on Sept 20, 2010.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . 2008 dodge ram 2500 mega cab 4x4. i had steering vibration and sticking steering at slow speeds since i drove it off the lot. i had shocks, all steering linkage, stabilizer, bushings, hydroboost unit and pitman arm replaced, due to slow speed sticking and "death wobble. " my warranty expired at 39,000 miles, so i replaced shocks and stabilizer with bilsteins at my own expense. vibration and sticking wheel (power steering failure) still occurs. severe death wobble at 60+ mph. nhtsa needs to get involved. this is a major safety hazard and has nearly caused me to crash into other lanes of traffic. dodge cannot fix and refuses to accept any responsibility after your warranty expires. i have tried several times to work with chrysler and they don't have the answers or want you to pay for diagnosis they cannot solve. please help...... *tr.Mileage was 14645 miles. Vehicle Identification Number (VIN):3D7KS29A98G. Dodge Ram 2500 2008 problem was reported in PINON HILLS, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 65 mph.

Dodge Ram 2500 2008 Steering Linkages Tie Rod Assembly

Dodge Ram 2500 2008 Steering Linkages Tie Rod Assembly Review #10357937

DODGE RAM 2500 2008 car safety problem was reported on Sept 25, 2010.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING:LINKAGES:TIE ROD ASSEMBLY . tl* the contact owns a 2008 dodge ram 2500. the contact was entering a residential highway at less than 5 mph when the vehicle lunged forward and began hesitating. the contact exited the vehicle and discovered that the front tie rod had fractured and was puncturing the front driver side tire. the vehicle was taken to the dealer where the contact was awaiting repairs. the failure and current mileage was approximately 38,900..Mileage was 38900 miles. Vehicle Identification Number (VIN):3D7KS28AX8G. Dodge Ram 2500 2008 problem was reported in REDDING, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 5 mph.

Dodge Ram 2500 2008 Vehicle Speed Control

Dodge Ram 2500 2008 Vehicle Speed Control Review #10359126

DODGE RAM 2500 2008 car safety problem was reported on Oct 04, 2010.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with VEHICLE SPEED CONTROL . tl* the contact owns a 2008 dodge ram 2500. the contact stated the accelerator pedal became stuck in the open throttle position while attempting a right turn. the vehicle abnormally accelerated to 60 mph before the contact was able to shift into neutral and turn the vehicle off. the contact had not driven the vehicle since the failure. the vehicle was not repaired. the failure mileage and current mileage was 61,346..Mileage was 61346 miles. Vehicle Identification Number (VIN):3D7KS28A18G. Dodge Ram 2500 2008 problem was reported in PINE BLUFF, NC. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 60 mph.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10365495

DODGE RAM 2500 2008 car safety problem was reported on Nov 11, 2010.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl*the contact owns a 2008 dodge ram 2500. the contact stated that while driving in reverse, the power steering failed. the vehicle was towed to a local repair shop. the contact called the dealer who stated that the vehicle was included in recall 09v005000 (steering: linkages: tie rod assembly) and it was repaired. the failure mileage was approximately 45,000. updated 8/19/14*cn.Mileage was 45000 miles. Vehicle Identification Number (VIN):3D7KS28A38G. Dodge Ram 2500 2008 problem was reported in MARIPOSA, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Dodge Ram 2500 2008 drive type:4WD. FUEL SYSTEM:Turbo. FUEL TYPE: DIESEL. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2008 Steering Review #10366591

DODGE RAM 2500 2008 car safety problem was reported on June 30, 2010.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . tl*the contact owns a 2008 dodge ram 2500. the contact stated that while driving 55 mph, the vehicle began to drift to the right. the vehicle was taken to an authorized dealer to have the front ball joint replaced. five months after the repair, the failure occurred again. the dealer stated that the steering was defective and was the cause of the ball joint failure. the failure mileage was 30,052. .Mileage was 30052 miles. Vehicle Identification Number (VIN):3D7KS28A48G. Dodge Ram 2500 2008 problem was reported in SEQUIM, WA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 55 mph.

Dodge Ram 2500 2008 Engine And Engine Cooling Engine Diesel

Dodge Ram 2500 2008 Engine And Engine Cooling Engine Diesel Review #10368663

DODGE RAM 2500 2008 car safety problem was reported on Oct 18, 2008.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with ENGINE AND ENGINE COOLING:ENGINE:DIESEL . tl* the contact owns a 2008 dodge ram 2500 diesel. the contact stated when the emission control system would load it would inhibit the vehicle acceleration capability. the contact stated that he had experienced the failure since the date of purchase. the dealer stated they performed a flash system check but did not correct the failure. the contact stated that the failure was most prominent when city driving or driving within stop and go traffic. the vin was not accepted. the failure mileage was 1,500 and the current mileage was 12,000. updated 01/24/11 *bf updated 03/22/11.Mileage was 1500 miles. Vehicle Identification Number (VIN):3D7KS26A08G. Dodge Ram 2500 2008 problem was reported in EAST ROCHESTER, PA. Original Owner. Vehicle was purchased on Dec 30, 2007. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. FUEL SYSTEM:Turbo. FUEL TYPE: DIESEL. Dodge Ram 2500 2008 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2008 Unknown Or Other

Dodge Ram 2500 2008 Unknown Or Other Review #10371128

DODGE RAM 2500 2008 car safety problem was reported on Nov 12, 2010.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with UNKNOWN OR OTHER . while driving my 2008 dodge ram 2500 cummins diesel if i hit an oblique bump in the road the truck starts shaking side to side so violently that i feel like the doors will come of. it has happened about 20 to 30 times and when it happens i have to bring the truck to a complete stop in the middle of freeway or road before i can drive again. i have contacted chrysler and after many phone calls they have agreed to pay for a fix, the problem is the local dealer tells me if they do the repair chrysler will not reimburse them. it seems as they are playing games with me. my truck has only 70,000 miles and dealer says the wear on the front end seems like on 90,000 miles truck. i have replaced the steering dampener at about 30,000 miles and have not seen any difference. *tr.Mileage was 24000 miles. Vehicle Identification Number (VIN):3D3KS28A08G. Dodge Ram 2500 2008 problem was reported in SPLENDORA, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Dodge Ram 2500 2008 drive type:4WD. VEHICLE SPEED: 55 mph.

Dodge Ram 2500 2008 Engine And Engine Cooling Engine Diesel

Dodge Ram 2500 2008 Engine And Engine Cooling Engine Diesel Review #10373509

DODGE RAM 2500 2008 car safety problem was reported on Apr 01, 2008.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with ENGINE AND ENGINE COOLING:ENGINE:DIESEL . i purchased a new dodge ram 2500 pick-up in march 2008. within 5 weeks, vehicle started operating poorly. check engine light would come on, truck would lose power, heavy black smoke from exhaust. truck was brought back to dealership eight times in first six months. dodge stated they could find no problems with vehicle. problems continues and escalated. truck continues to operate erratically. it has come to the point the vehicle loses all power and just shuts down while driving on the highway. this has occurred six times between november 2009 and december 2010. this is a serious safety issue! the truck has lost power and stopped on the iha and i narrowly missed being hit by tractor trailers. dodge still refused to take this vehicle back or even acknowledge there is a serious safety problem!! need your help to get dodge to do something to investigate and correct problem before someone is hurt or killed. *tr updated ivoq 12/06/11.Mileage was 39461 miles. Vehicle Identification Number (VIN):3D7KS28A78G. Dodge Ram 2500 2008 problem was reported in STAMFORD, CT. Vehicle was purchased on Mar 01, 2008. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Dodge Ram 2500 2008 drive type:4WD. FUEL SYSTEM:Turbo. FUEL TYPE: DIESEL. VEHICLE SPEED: 55 mph.

Dodge Ram 2500 2008 Electrical System

Dodge Ram 2500 2008 Electrical System Review #10373509

DODGE RAM 2500 2008 car safety problem was reported on Apr 01, 2008.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with ELECTRICAL SYSTEM . i purchased a new dodge ram 2500 pick-up in march 2008. within 5 weeks, vehicle started operating poorly. check engine light would come on, truck would lose power, heavy black smoke from exhaust. truck was brought back to dealership eight times in first six months. dodge stated they could find no problems with vehicle. problems continues and escalated. truck continues to operate erratically. it has come to the point the vehicle loses all power and just shuts down while driving on the highway. this has occurred six times between november 2009 and december 2010. this is a serious safety issue! the truck has lost power and stopped on the iha and i narrowly missed being hit by tractor trailers. dodge still refused to take this vehicle back or even acknowledge there is a serious safety problem!! need your help to get dodge to do something to investigate and correct problem before someone is hurt or killed. *tr updated ivoq 12/06/11.Mileage was 39461 miles. Vehicle Identification Number (VIN):3D7KS28A78G. Dodge Ram 2500 2008 problem was reported in STAMFORD, CT. Vehicle was purchased on Mar 01, 2008. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Dodge Ram 2500 2008 drive type:4WD. FUEL SYSTEM:Turbo. FUEL TYPE: DIESEL. VEHICLE SPEED: 55 mph.

Dodge Ram 2500 2008 Fuel System, Diesel

Dodge Ram 2500 2008 Fuel System, Diesel Review #10373509

DODGE RAM 2500 2008 car safety problem was reported on Apr 01, 2008.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with FUEL SYSTEM, DIESEL . i purchased a new dodge ram 2500 pick-up in march 2008. within 5 weeks, vehicle started operating poorly. check engine light would come on, truck would lose power, heavy black smoke from exhaust. truck was brought back to dealership eight times in first six months. dodge stated they could find no problems with vehicle. problems continues and escalated. truck continues to operate erratically. it has come to the point the vehicle loses all power and just shuts down while driving on the highway. this has occurred six times between november 2009 and december 2010. this is a serious safety issue! the truck has lost power and stopped on the iha and i narrowly missed being hit by tractor trailers. dodge still refused to take this vehicle back or even acknowledge there is a serious safety problem!! need your help to get dodge to do something to investigate and correct problem before someone is hurt or killed. *tr updated ivoq 12/06/11.Mileage was 39461 miles. Vehicle Identification Number (VIN):3D7KS28A78G. Dodge Ram 2500 2008 problem was reported in STAMFORD, CT. Vehicle was purchased on Mar 01, 2008. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Dodge Ram 2500 2008 drive type:4WD. FUEL SYSTEM:Turbo. FUEL TYPE: DIESEL. VEHICLE SPEED: 55 mph.

Dodge Ram 2500 2008 Vehicle Speed Control

Dodge Ram 2500 2008 Vehicle Speed Control Review #10374116

DODGE RAM 2500 2008 car safety problem was reported on May 04, 2010.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with VEHICLE SPEED CONTROL . tl*the contact owns a 2008 dodge ram 2500. while stopped, the contact attempted to accelerate but the vehicle did not respond for approximately 4 seconds. the vehicle was taken to an authorized dealer but the failure could not be diagnosed. the failure occurred intermittently so the vehicle was taken back to the dealer who was still unable to diagnose the problem. the vehicle was not repaired. the vin was unavailable. the failure mileage was approximately 18,000 and the current mileage was approximately 39,000..Mileage was 18000 miles. Dodge Ram 2500 2008 problem was reported in NORCO, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2008 Vehicle Speed Control Review #10374639

DODGE RAM 2500 2008 car safety problem was reported on Dec 22, 2010.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with VEHICLE SPEED CONTROL . tl*the contact owns a 2007 dodge ramm 2500 st. while driving approximately 25-40 mph, there was a sudden increase in the acceleration for three seconds. the vehicle began to slow down after the contact applied the brakes repeatedly. the contact was able to continue driving with caution. the vehicle was taken to an authorized dealer for inspection. the contact was awaiting a response as to the cause of failure. the failure mileage was 60,000. .Mileage was 60000 miles. Vehicle Identification Number (VIN):3D6WR26DX7G. Dodge Ram 2500 2008 problem was reported in SANTA PAULA, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 25 mph.

Dodge Ram 2500 2008 Service Brakes, Hydraulic

Dodge Ram 2500 2008 Service Brakes, Hydraulic Review #10376385

DODGE RAM 2500 2008 car safety problem was reported on Jan 09, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with SERVICE BRAKES, HYDRAULIC . tl*the contact owns a 2008 dodge ram 2500. the contact stated that the abs failed causing the vehicle to slide down a hill and into an intersection. the contact had to pump the brakes for the vehicle to stop. the vehicle had not been inspected or repaired. the current and failure mileages were 12,000. .Mileage was 12000 miles. Vehicle Identification Number (VIN):3D7KS26A08G. Dodge Ram 2500 2008 problem was reported in EAST ROCHESTER, PA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10390498

DODGE RAM 2500 2008 car safety problem was reported on Mar 08, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . steering dampener broke at stud. caused wheels to "pidgeon toe" and steering to become inoperable. parts replaced: #52122362-af; #52122370-ab. vehicle required tow-in. damage noted backing out of a parking place. status update. updated 06/15/11 *tr.Mileage was 71805 miles. Vehicle Identification Number (VIN):3D7KS28A58G. Dodge Ram 2500 2008 problem was reported in PAOLI, PA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL SYSTEM:Turbo. FUEL TYPE: DIESEL. VEHICLE SPEED: 2 mph.

Dodge Ram 2500 2008 Engine And Engine Cooling Engine Diesel

Dodge Ram 2500 2008 Engine And Engine Cooling Engine Diesel Review #10390545

DODGE RAM 2500 2008 car safety problem was reported on July 01, 2010.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with ENGINE AND ENGINE COOLING:ENGINE:DIESEL . tl*the contact owns a 2008 dodge ram 2500 mega cab. when the contact attempted to accelerate, the vehicle stalled intermittently without warning. the dealer was unable to duplicate the failure. a complaint was filed with the manufacturer. the vehicle was not repaired. the current mileage is 41,000 and the failure mileage was 30,000. updated 4/11/2011 *cnupdated updated 04/27/11.Mileage was 30000 miles. Vehicle Identification Number (VIN):3D7KS29A18G. Dodge Ram 2500 2008 problem was reported in NORCO, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL SYSTEM:Turbo. FUEL TYPE: DIESEL.

Dodge Ram 2500 2008 Suspension Front

Dodge Ram 2500 2008 Suspension Front Review #10393835

DODGE RAM 2500 2008 car safety problem was reported on June 01, 2010.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with SUSPENSION:FRONT . i own a 2005 and a 2008 dodge diesel 4x4,automatic trans. i've had to replace both stabilizer bars and links as well as all the other bars running across the front of the trucks. i've already replaced the linkage and steering box on the 08 due to loss of steering involving an accident. i now have the steering gear and linkage going out on the 05. the dealership says there's no recall on my problems. funny how its happening w.both trucks. the 05 had about 50,000 when the problems stared occurring and the 08 started at approx. 2,000 mi, my shop had told me my wheel bearings were already getting worn and needed replacing soon in the 08, and its still new!! the tranny has been rebuilt in the 05 at 50,000. the 08 has been in the shop at least 5 times already and now has 14,000 on it. im sure spending alot of money on both trucks with the same problems i wish someone would look into these issues. its pretty strange both trucks have the same problems. dodge acknowledges these problems but tells me i still have to pay for itbecause they're using better parts that are more costly. if im paying for it anyway i might as well take them to another shop i trust. i wouldn't advise anyone to buy a dodge. nothing but a headache and im going broke! i've lost my faith and am scared to even take my children to school! *tr.Vehicle was involved in a crash. Mileage was 2000 miles. Vehicle Identification Number (VIN):3D7KS29A08G. Dodge Ram 2500 2008 problem was reported in SPRINGVILLE, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Dodge Ram 2500 2008 drive type:4WD. VEHICLE SPEED: 8 mph.

Dodge Ram 2500 2008 Suspension Review #10397730

DODGE RAM 2500 2008 car safety problem was reported on Apr 01, 2010.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with SUSPENSION . at freeway speeds of 50-70 mph, when the truck hits imperfections in the road, including botz dots and potholes, the front end of the truck enters into a violent shake, which is completely uncontrollable, and requires bringing the vehicle to a complete stop. this occurs approximately 2-3 times per month. i've replaced the steering box, steering dampener, tie rods and tie rod ends, tires, shocks, and drag link, and none of these have corrected the problem. i also added a steering gear brace, and this didn't help either..Mileage was 16000 miles. Vehicle Identification Number (VIN):3D7KS28A48G. Dodge Ram 2500 2008 problem was reported in VENTURA, CA. Vehicle was not using Cruise Control. VEHICLE SPEED: 65 mph.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10397730

DODGE RAM 2500 2008 car safety problem was reported on Apr 01, 2010.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . at freeway speeds of 50-70 mph, when the truck hits imperfections in the road, including botz dots and potholes, the front end of the truck enters into a violent shake, which is completely uncontrollable, and requires bringing the vehicle to a complete stop. this occurs approximately 2-3 times per month. i've replaced the steering box, steering dampener, tie rods and tie rod ends, tires, shocks, and drag link, and none of these have corrected the problem. i also added a steering gear brace, and this didn't help either..Mileage was 16000 miles. Vehicle Identification Number (VIN):3D7KS28A48G. Dodge Ram 2500 2008 problem was reported in VENTURA, CA. Vehicle was not using Cruise Control. VEHICLE SPEED: 65 mph.

Dodge Ram 2500 2008 Steering Review #10402314

DODGE RAM 2500 2008 car safety problem was reported on May 22, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . driver's side outer tie rod end snapped off today. already replaced 1 year ago for same problem. dodge ram 2500, 5.7 liter hemi, year 2008. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 25000 miles. Vehicle Identification Number (VIN):3D7KS28D98G. Dodge Ram 2500 2008 problem was reported in CHELSEA, MI. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. Dodge Ram 2500 2008 drive type:4WD. VEHICLE SPEED: 2 mph.

Dodge Ram 2500 2008 Steering Linkages Tie Rod Assembly

Dodge Ram 2500 2008 Steering Linkages Tie Rod Assembly Review #10405477

DODGE RAM 2500 2008 car safety problem was reported on June 05, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING:LINKAGES:TIE ROD ASSEMBLY . tl* the contact owns a 2008 dodge ram 2500. the contact stated that while parking the vehicle, the front driver side tie rod end fractured and damaged the rim. the vehicle was towed to the dealer who confirmed that the tie rod was fractured. the manufacturer was made aware of the failure and offered to pay for a portion of the repair costs. the vehicle was repaired. the failure and current mileage was 80,000..Mileage was 80000 miles. Vehicle Identification Number (VIN):3D7KS28A18G. Dodge Ram 2500 2008 problem was reported in HEWITT, NJ. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering Review #10407201

DODGE RAM 2500 2008 car safety problem was reported on June 16, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . went to dodge dealership for routine tire rotation and alignment and they informed me that i needed all 4 ball joints replaced at only 62,833 miles to the cost of $3,000 (no mention of a possible defect) doing research on the replacement of these ball joints i found the complaints and decided to file one as well. this definitely poses a danger to my family as well as others who may not be aware of the possible defect. *tr.Mileage was 62833 miles. Vehicle Identification Number (VIN):3D7KS28A58G. Dodge Ram 2500 2008 problem was reported in RICHLANDS, NC. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2008 Suspension

Dodge Ram 2500 2008 Suspension Review #10407201

DODGE RAM 2500 2008 car safety problem was reported on June 16, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with SUSPENSION . went to dodge dealership for routine tire rotation and alignment and they informed me that i needed all 4 ball joints replaced at only 62,833 miles to the cost of $3,000 (no mention of a possible defect) doing research on the replacement of these ball joints i found the complaints and decided to file one as well. this definitely poses a danger to my family as well as others who may not be aware of the possible defect. *tr.Mileage was 62833 miles. Vehicle Identification Number (VIN):3D7KS28A58G. Dodge Ram 2500 2008 problem was reported in RICHLANDS, NC. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2008 Steering Linkages Tie Rod Assembly

Dodge Ram 2500 2008 Steering Linkages Tie Rod Assembly Review #10409206

DODGE RAM 2500 2008 car safety problem was reported on Oct 01, 2010.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING:LINKAGES:TIE ROD ASSEMBLY . tl* the contact owns a 2008 dodge ram 2500 crew cab. the contact stated while driving approximately 5 mph he suddenly lost control of the steering wheel. the vehicle was towed to a dealer who advised him that the drivers side front tie rod end had fractured and caused the steering to fail. the drivers front tie rod end was repaired; however, in less than a year, the identical failure recurred causing the same failure with the steering. the vehicle was taken back to the dealer and repaired on the drivers side. the failure mileage was approximately 97,000. .0 person(s) were injured. 0 person(s) died.Mileage was 97000 miles. Vehicle Identification Number (VIN):3D7KS28D98G. Dodge Ram 2500 2008 problem was reported in FAYETTEVILLE, PA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 5 mph.

Dodge Ram 2500 2008 Steering Review #10412434

DODGE RAM 2500 2008 car safety problem was reported on May 28, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. while driving approximately 35 mph, the steering wheel locked and the vehicle slipped into anti theft mode. the vehicle was towed to the dealer where the technicians replaced the anti theft module, the power steering pump and fluid. the failure recurred after the repairs and the vehicle was towed back to the dealer. the anti theft module, u joint, power steering pump and fluids were replaced again. after the repairs, the contact noticed a grinding noise from the front driver side wheel. the vehicle was not further repaired. the approximate failure mileage was 60,000. updated 08/30/11*lj updated 2/9/2012 *cn.Mileage was 60000 miles. Vehicle Identification Number (VIN):3D7MX38A48G. Dodge Ram 2500 2008 problem was reported in MEEKER, CO. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 35 mph. DEALER'S NAME: CHRISTOPHER'S DODGE WORLD . DEALER'S TELEPHONE NUMBER: 303-238-7311 . DEALER'S CITY: GOLDEN . DEALER'S STATE CODE: CO. DEALER'S ZIPCODE: 80401 .

Dodge Ram 2500 2008 Steering Linkages Tie Rod Assembly Review #10414707

DODGE RAM 2500 2008 car safety problem was reported on July 15, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING:LINKAGES:TIE ROD ASSEMBLY . tl* the contact owns 2008 dodge ram 2500. the contact was driving 5 mph when the contact heard a loud noise from the front end of the vehicle. the contact pulled over to inspect the vehicle and found that the front driver side tie-rod was fractured. the vehicle was towed to a local mechanic to have the tie-rod replaced. the mechanic also noticed the passenger side tie-rod was faulty and the ball joints were defective. the contact stated that a crash could have occurred if the vehicle was on the highway during the failure. the failure mileage was 41,000. kmj.Mileage was 41000 miles. Vehicle Identification Number (VIN):3D7KS29A68G. Dodge Ram 2500 2008 problem was reported in PLAINVIEW, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 5 mph.

Dodge Ram 2500 2008 Suspension Front

Dodge Ram 2500 2008 Suspension Front Review #10414707

DODGE RAM 2500 2008 car safety problem was reported on July 15, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with SUSPENSION:FRONT . tl* the contact owns 2008 dodge ram 2500. the contact was driving 5 mph when the contact heard a loud noise from the front end of the vehicle. the contact pulled over to inspect the vehicle and found that the front driver side tie-rod was fractured. the vehicle was towed to a local mechanic to have the tie-rod replaced. the mechanic also noticed the passenger side tie-rod was faulty and the ball joints were defective. the contact stated that a crash could have occurred if the vehicle was on the highway during the failure. the failure mileage was 41,000. kmj.Mileage was 41000 miles. Vehicle Identification Number (VIN):3D7KS29A68G. Dodge Ram 2500 2008 problem was reported in PLAINVIEW, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 5 mph.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10414972

DODGE RAM 2500 2008 car safety problem was reported on June 30, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact stated while driving at a low speed approximately 10 mph the steering wheel made a loud squeaking noise, but the failure occurred intermittently. the vehicle was taken to the dealer who performed a diagnostic test but was unable to duplicate the failure. the manufacturer was notified but would not assist with the repair because the vehicle was not included in nhtsa campaign id number: 11v350000 steering: linkages: tie rod assembly. the vehicle was not repaired. the failure and current miles were 41,000. .Mileage was 41000 miles. Vehicle Identification Number (VIN):3D7KS29A28G. Dodge Ram 2500 2008 problem was reported in ST LOUIS, MO. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 10 mph.

Dodge Ram 2500 2008 Steering Review #10416493

DODGE RAM 2500 2008 car safety problem was reported on July 17, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact stated while driving 5 mph and making a left turn the front drivers side tie rod broke. the contact lost complete control of the steering wheel. the contact stated had the vehicle been traveling at a high rate of speed, a crash could have occurred. the vehicle was towed to a local mechanic who replaced the tie rod. the contact called the manufacturer and filed a complaint. the contact stated the vehicle was unsafe to drive. the failure mileage was 45,000. .Mileage was 45000 miles. Vehicle Identification Number (VIN):3D3KS28A98G. Dodge Ram 2500 2008 problem was reported in SPENCER, IN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 5 mph.

Dodge Ram 2500 2008 Engine And Engine Cooling Engine

Dodge Ram 2500 2008 Engine And Engine Cooling Engine Review #10416551

DODGE RAM 2500 2008 car safety problem was reported on July 28, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with ENGINE AND ENGINE COOLING:ENGINE . 2008 dodge ram diesel check engine light. codes shows turbo problems. they have reprogrammed computer, cleaned the turbo twice, replaced the turbo and the check engine light keeps coming on. the truck has been in the shop for this 3 times. and total of 7 days, and back again tomorrow. *kb.Mileage was 27818 miles. Vehicle Identification Number (VIN):3D7KS28A18G. Dodge Ram 2500 2008 problem was reported in NEVADA, NV. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Dodge Ram 2500 2008 drive type:4WD. FUEL TYPE: DIESEL. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2008 Fuel System, Diesel

Dodge Ram 2500 2008 Fuel System, Diesel Review #10416551

DODGE RAM 2500 2008 car safety problem was reported on July 28, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with FUEL SYSTEM, DIESEL . 2008 dodge ram diesel check engine light. codes shows turbo problems. they have reprogrammed computer, cleaned the turbo twice, replaced the turbo and the check engine light keeps coming on. the truck has been in the shop for this 3 times. and total of 7 days, and back again tomorrow. *kb.Mileage was 27818 miles. Vehicle Identification Number (VIN):3D7KS28A18G. Dodge Ram 2500 2008 problem was reported in NEVADA, NV. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Dodge Ram 2500 2008 drive type:4WD. FUEL TYPE: DIESEL. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10416880

DODGE RAM 2500 2008 car safety problem was reported on Aug 02, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500 hd. the contact stated that the front driver side tie rod snapped, making it difficult to control the steering wheel. the cotnact was able to drive onto the emergency lane without incident. the vehicle was not inspected or repaired. the current and failure mileage was 99,800. .Mileage was 99800 miles. Vehicle Identification Number (VIN):3D7KS28D08G. Dodge Ram 2500 2008 problem was reported in SAN DIEGO, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Suspension Front

Dodge Ram 2500 2008 Suspension Front Review #10417729

DODGE RAM 2500 2008 car safety problem was reported on June 11, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with SUSPENSION:FRONT . while driving 2008 dodge ram mega cab (~82,000 miles) on i-39 north from bloomington il at mile marker 87, complete loss of steering occured on vehicle. was able to get vehicle to stop. got out and inspected vehicle found outer tie rod on passenger side seperated. call police and chrysler customer service. tow truck took vehicle to rochelle il dodge dealer. il state patrol was on site also. *tt.Mileage was 82000 miles. Vehicle Identification Number (VIN):3D7KS29A88G. Dodge Ram 2500 2008 problem was reported in SUN PRAIRIE, WI. Accident was reported to Police. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Dodge Ram 2500 2008 drive type:4WD. FUEL TYPE: DIESEL. VEHICLE SPEED: 50 mph.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10417729

DODGE RAM 2500 2008 car safety problem was reported on June 11, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . while driving 2008 dodge ram mega cab (~82,000 miles) on i-39 north from bloomington il at mile marker 87, complete loss of steering occured on vehicle. was able to get vehicle to stop. got out and inspected vehicle found outer tie rod on passenger side seperated. call police and chrysler customer service. tow truck took vehicle to rochelle il dodge dealer. il state patrol was on site also. *tt.Mileage was 82000 miles. Vehicle Identification Number (VIN):3D7KS29A88G. Dodge Ram 2500 2008 problem was reported in SUN PRAIRIE, WI. Accident was reported to Police. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Dodge Ram 2500 2008 drive type:4WD. FUEL TYPE: DIESEL. VEHICLE SPEED: 50 mph.

Dodge Ram 2500 2008 Suspension

Dodge Ram 2500 2008 Suspension Review #10417903

DODGE RAM 2500 2008 car safety problem was reported on Sept 11, 2010.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with SUSPENSION . tl* the contact owns a 2008 dodge 2500 hd. the contact stated that while driving 60 mph over a bump in the road, the vehicle would shake violently. the vehicle was taken to an authorized dealer where they were unable to diagnose the failure. the manufacturer was notified and the contact was awaiting a call back from them. the vehicle was not repaired. in addition, the latch release for the emergency brake would detach and separate from the vehicle. the vehicle was taken to an authorized dealer on numerous occasions where it was repaired, but the failure recurred. the failure mileage was 39,000 and the current mileage was 46,000. .Mileage was 39000 miles. Vehicle Identification Number (VIN):3D7KS28A28G. Dodge Ram 2500 2008 problem was reported in ST. JOSEPH, MO. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 60 mph.

Dodge Ram 2500 2008 Parking Brake

Dodge Ram 2500 2008 Parking Brake Review #10417903

DODGE RAM 2500 2008 car safety problem was reported on Sept 11, 2010.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with PARKING BRAKE . tl* the contact owns a 2008 dodge 2500 hd. the contact stated that while driving 60 mph over a bump in the road, the vehicle would shake violently. the vehicle was taken to an authorized dealer where they were unable to diagnose the failure. the manufacturer was notified and the contact was awaiting a call back from them. the vehicle was not repaired. in addition, the latch release for the emergency brake would detach and separate from the vehicle. the vehicle was taken to an authorized dealer on numerous occasions where it was repaired, but the failure recurred. the failure mileage was 39,000 and the current mileage was 46,000. .Mileage was 39000 miles. Vehicle Identification Number (VIN):3D7KS28A28G. Dodge Ram 2500 2008 problem was reported in ST. JOSEPH, MO. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 60 mph.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10418211

DODGE RAM 2500 2008 car safety problem was reported on Aug 04, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . death wobble on an 2008 dodge ram 2500 4x4 crew cab long bed. this recently happened six times and does not stop until the truck is almost to a stop. went into other lane once causing other drivers to avoid collision. just recently have had the truck over 65 mph. drove 75 mph on i -80 to co, and then to coast of ca. death wobble has happened at speeds of 30 mph to 70 mph. the front end wobbles slightly on small bumps which puts you on edge thinking it will go into a violent wobble immediately at normal highway speeds, or below. there is no visible damage to any parts in the front end and alignment seems fine. no solution had yet been found. *tr.Mileage was 37000 miles. Vehicle Identification Number (VIN):3D7KS28A28G. Dodge Ram 2500 2008 problem was reported in RENO, NV. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 70 mph.

Dodge Ram 2500 2008 Suspension Front

Dodge Ram 2500 2008 Suspension Front Review #10418211

DODGE RAM 2500 2008 car safety problem was reported on Aug 04, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with SUSPENSION:FRONT . death wobble on an 2008 dodge ram 2500 4x4 crew cab long bed. this recently happened six times and does not stop until the truck is almost to a stop. went into other lane once causing other drivers to avoid collision. just recently have had the truck over 65 mph. drove 75 mph on i -80 to co, and then to coast of ca. death wobble has happened at speeds of 30 mph to 70 mph. the front end wobbles slightly on small bumps which puts you on edge thinking it will go into a violent wobble immediately at normal highway speeds, or below. there is no visible damage to any parts in the front end and alignment seems fine. no solution had yet been found. *tr.Mileage was 37000 miles. Vehicle Identification Number (VIN):3D7KS28A28G. Dodge Ram 2500 2008 problem was reported in RENO, NV. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 70 mph.

Dodge Ram 2500 2008 Exterior Lighting

Dodge Ram 2500 2008 Exterior Lighting Review #10418283

DODGE RAM 2500 2008 car safety problem was reported on Sept 02, 2009.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with EXTERIOR LIGHTING . tl* the contact owns a 2008 dodge ram 2500. the contact stated that when he activated the right turn signal the left signal would illuminate, and when he activated the left turn signal, the right signal would activate. the dealer made two attempts to duplicate the failure by replacing the multi function switch however, the failure recurred. the manufacturer was not notified of the failure. the current mileage was 75,000. the approximate failure mileage was 30,000. .Mileage was 30000 miles. Vehicle Identification Number (VIN):3D7KS29AX8G. Dodge Ram 2500 2008 problem was reported in HUMBLE, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10418330

DODGE RAM 2500 2008 car safety problem was reported on Jan 10, 2010.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact stated that while driving approximately 5 mph, the steering wheel seized and became stiff, making it difficult to steer and maneuver the vehicle. in addition, the contact noticed a clunking noise and a vibration in the steering column. after pulling the steering wheel and depressing the brake pedal, the steering began to function as normal. the failure occurred intermittently while driving at various speeds. the vehicle was taken to an independent mechanic for diagnostics, where the mechanic stated that the outer ball joints were wearing abnormally and the steering shaft and linkages were loose. the dealer was made aware of the failure, but stated that the part was on a national back order and not available. the vehicle was not repaired. the approximate failure mileage was 38,000. .Mileage was 38000 miles. Vehicle Identification Number (VIN):3D7KS29A18G. Dodge Ram 2500 2008 problem was reported in DALLAS, OR. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 5 mph.

Dodge Ram 2500 2008 Steering Review #10419845

DODGE RAM 2500 2008 car safety problem was reported on Aug 14, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . vehicle has progressively become scary to drive. it started with a squishy sound under the hood transmitted through the steering wheel when turning. over the last two months has increased to a steering wheel that will vibrate and if hit a rough road will jerk out of my hands while driving at any speed. i do not feel safe in transporting my family in this truck anymore. *kb.Mileage was 52000 miles. Dodge Ram 2500 2008 problem was reported in BROOKVILLE, IN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 65 mph.

Dodge Ram 2500 2008 Engine And Engine Cooling Exhaust System

Dodge Ram 2500 2008 Engine And Engine Cooling Exhaust System Review #10421622

DODGE RAM 2500 2008 car safety problem was reported on Feb 15, 2009.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with ENGINE AND ENGINE COOLING:EXHAUST SYSTEM . tl* the contact owns a 2008 dodge ram 2500 diesel. the contact stated that he would smell exhaust entering the cab of the vehicle. the odor was so overpowering that it caused irritation to the eyes and illness. the contact stated that the failure was most prominent when the heater was activated and was intermittent. the vehicle was taken to the dealer but the dealer was unable to duplicate the failure. the vehicle was not repaired. the failure mileage was 16,500 and the current mileage was 31,000. .1 person(s) were injured. Mileage was 16500 miles. Vehicle Identification Number (VIN):3D7KS29A48G. Dodge Ram 2500 2008 problem was reported in LODI, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Engine And Engine Cooling Exhaust System Review #10422435

DODGE RAM 2500 2008 car safety problem was reported on Apr 10, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with ENGINE AND ENGINE COOLING:EXHAUST SYSTEM . when this diesel truck cleans it"s particulate filter i get a strong fuel smell odor in the cab when stopped at a stop light or stop sign. this cleaning of the d.p.r. filter happens every 100 or so miles driven and last for about 20 miles. when the odor occurs my eyes burn, and i cough alot. so far the dodge dealers are unable to fix my problem. i have taken the pick up truck to two different dealers trying to get relief from this problem. *tr.Mileage was 42000 miles. Vehicle Identification Number (VIN):3D7KS28A38G. Dodge Ram 2500 2008 problem was reported in SURPRISE, AZ. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2008 Fuel System, Diesel

Dodge Ram 2500 2008 Fuel System, Diesel Review #10422435

DODGE RAM 2500 2008 car safety problem was reported on Apr 10, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with FUEL SYSTEM, DIESEL . when this diesel truck cleans it"s particulate filter i get a strong fuel smell odor in the cab when stopped at a stop light or stop sign. this cleaning of the d.p.r. filter happens every 100 or so miles driven and last for about 20 miles. when the odor occurs my eyes burn, and i cough alot. so far the dodge dealers are unable to fix my problem. i have taken the pick up truck to two different dealers trying to get relief from this problem. *tr.Mileage was 42000 miles. Vehicle Identification Number (VIN):3D7KS28A38G. Dodge Ram 2500 2008 problem was reported in SURPRISE, AZ. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10422506

DODGE RAM 2500 2008 car safety problem was reported on Aug 25, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact stated that while driving 30 mph, the vehicle suddenly shook excessively and became difficult to control. after inspecting the vehicle, the contact noticed that the passenger side tie rod fractured and was detached from the vehicle. the vehicle was towed to an authorized dealer and the contact was informed that the entire steering assembly needed to be replaced. the contact also stated that in august 2010, the vehicle was taken to the dealer for the recall associated with nhtsa campaign id number 09v005000 (steering:linkages:tie rod assembly). the manufacturer was aware of the failure; however, did not offer any assistance. the failure and current mileages were 55,000. .Mileage was 55000 miles. Vehicle Identification Number (VIN):3D7KS28A68G. Dodge Ram 2500 2008 problem was reported in PLEASANT GROVE, UT. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 30 mph.

Dodge Ram 2500 2008 Steering Review #10424076

DODGE RAM 2500 2008 car safety problem was reported on Sept 02, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact stated the front driver side tie rod fractured while driving. the contact spoke with the manufacturer in regards to nhtsa recall campaign id number: 11v35000 (steering: linkage: tie rod assembly) but was told that the vehicle was not included in the recall. the vehicle was not repaired. the failure mileage was 120,000. .0 person(s) were injured. 0 person(s) died.Mileage was 120000 miles. Vehicle Identification Number (VIN):3D7KS28A78G. Dodge Ram 2500 2008 problem was reported in ISSAQUAH, WA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Engine And Engine Cooling

Dodge Ram 2500 2008 Engine And Engine Cooling Review #10424596

DODGE RAM 2500 2008 car safety problem was reported on July 13, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with ENGINE AND ENGINE COOLING . i took my 2008 dodge 2500 into the dealer after experiencing a "pop" sensation in the front end at low speed (5-10mph). the dealer stated that both tie rod ends where worn out as well as both upper and lower ball joints. i spoke with the manager as the truck is out of warranty and he stated this was normal wear and tear. i then contacted the chrysler help line. initially they gave the impression that they may be able to assist me with this problem. however in a return phone call, they stated they could not do anything because of the mileage. of course i asked them how was it possible for the whole front end to be shot at 70,000 miles when it was suppose to have a heavy duty suspension as it is a diesel and the truck has never hauled any kind of weight or been off road. the other point i made with them was they know they have a problem because in order to replace the tie rod ends, you have to replace the whole assembly from the tie rod ends all the way to the pittman arm because it was redesigned. go figure! additionally i have had the turbo charger replaced twice because the dealer said the unit was bad. my main concern now is the steering as it is going to cost me $2500.00 to correct and i do not have that laying around. *tr.Mileage was 70000 miles. Vehicle Identification Number (VIN):3D7KS29A88G. Dodge Ram 2500 2008 problem was reported in VIRGINIA BEACH, VA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL.

Dodge Ram 2500 2008 Suspension

Dodge Ram 2500 2008 Suspension Review #10424596

DODGE RAM 2500 2008 car safety problem was reported on July 13, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with SUSPENSION . i took my 2008 dodge 2500 into the dealer after experiencing a "pop" sensation in the front end at low speed (5-10mph). the dealer stated that both tie rod ends where worn out as well as both upper and lower ball joints. i spoke with the manager as the truck is out of warranty and he stated this was normal wear and tear. i then contacted the chrysler help line. initially they gave the impression that they may be able to assist me with this problem. however in a return phone call, they stated they could not do anything because of the mileage. of course i asked them how was it possible for the whole front end to be shot at 70,000 miles when it was suppose to have a heavy duty suspension as it is a diesel and the truck has never hauled any kind of weight or been off road. the other point i made with them was they know they have a problem because in order to replace the tie rod ends, you have to replace the whole assembly from the tie rod ends all the way to the pittman arm because it was redesigned. go figure! additionally i have had the turbo charger replaced twice because the dealer said the unit was bad. my main concern now is the steering as it is going to cost me $2500.00 to correct and i do not have that laying around. *tr.Mileage was 70000 miles. Vehicle Identification Number (VIN):3D7KS29A88G. Dodge Ram 2500 2008 problem was reported in VIRGINIA BEACH, VA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10424596

DODGE RAM 2500 2008 car safety problem was reported on July 13, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . i took my 2008 dodge 2500 into the dealer after experiencing a "pop" sensation in the front end at low speed (5-10mph). the dealer stated that both tie rod ends where worn out as well as both upper and lower ball joints. i spoke with the manager as the truck is out of warranty and he stated this was normal wear and tear. i then contacted the chrysler help line. initially they gave the impression that they may be able to assist me with this problem. however in a return phone call, they stated they could not do anything because of the mileage. of course i asked them how was it possible for the whole front end to be shot at 70,000 miles when it was suppose to have a heavy duty suspension as it is a diesel and the truck has never hauled any kind of weight or been off road. the other point i made with them was they know they have a problem because in order to replace the tie rod ends, you have to replace the whole assembly from the tie rod ends all the way to the pittman arm because it was redesigned. go figure! additionally i have had the turbo charger replaced twice because the dealer said the unit was bad. my main concern now is the steering as it is going to cost me $2500.00 to correct and i do not have that laying around. *tr.Mileage was 70000 miles. Vehicle Identification Number (VIN):3D7KS29A88G. Dodge Ram 2500 2008 problem was reported in VIRGINIA BEACH, VA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL.

Dodge Ram 2500 2008 Suspension

Dodge Ram 2500 2008 Suspension Review #10426266

DODGE RAM 2500 2008 car safety problem was reported on Sept 16, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with SUSPENSION . while driving 60mph the front end of the vehicle suddenly shook excessively and became difficult to control. upon stopping the car i found the drag link for right side had split and detached from ball joint. the vehicle was towed to an authorized dealer and i was informed that the entire steering assembly needed to be replaced. dodge has a known problem with this and no longer makes or supplies this failed part. this repair and replacement is at my cost and not covered under any recall or warranty. i was instructed the recall had been performed in april of 2011 and no action was needed at that time. *kb.Mileage was 72360 miles. Vehicle Identification Number (VIN):3D7KS28A18G. Dodge Ram 2500 2008 problem was reported in PAYSON, UT. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Dodge Ram 2500 2008 drive type:4WD. FUEL TYPE: DIESEL. VEHICLE SPEED: 60 mph.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10426266

DODGE RAM 2500 2008 car safety problem was reported on Sept 16, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . while driving 60mph the front end of the vehicle suddenly shook excessively and became difficult to control. upon stopping the car i found the drag link for right side had split and detached from ball joint. the vehicle was towed to an authorized dealer and i was informed that the entire steering assembly needed to be replaced. dodge has a known problem with this and no longer makes or supplies this failed part. this repair and replacement is at my cost and not covered under any recall or warranty. i was instructed the recall had been performed in april of 2011 and no action was needed at that time. *kb.Mileage was 72360 miles. Vehicle Identification Number (VIN):3D7KS28A18G. Dodge Ram 2500 2008 problem was reported in PAYSON, UT. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Dodge Ram 2500 2008 drive type:4WD. FUEL TYPE: DIESEL. VEHICLE SPEED: 60 mph.

Dodge Ram 2500 2008 Steering Review #10426910

DODGE RAM 2500 2008 car safety problem was reported on July 15, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact stated that the vehicle would violently shake from the front end of the vehicle, causing issues with his ability to steer safely. the dealer advised the contact to bring the vehicle in for diagnostic testing. the manufacturer was aware of the failure. the vehicle was not diagnosed or repaired. the current mileage was 39,900 and the approximate failure mileage was 35,500. .Mileage was 35500 miles. Vehicle Identification Number (VIN):3D7KS28A28G. Dodge Ram 2500 2008 problem was reported in RENO, NV. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering Review #10428419

DODGE RAM 2500 2008 car safety problem was reported on Sept 29, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact was entering a residential driveway when the stud for tie rod detached from the vehicle. the vehicle was not taken to the dealer for diagnostics or repairs. the manufacturer was made aware of the failure. the failure and current mileages were 40,903. .Mileage was 40903 miles. Vehicle Identification Number (VIN):3D7KS28A48G. Dodge Ram 2500 2008 problem was reported in CRESTON, LA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering Review #10429435

DODGE RAM 2500 2008 car safety problem was reported on Oct 01, 2010.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact stated that while driving 60 mph, the steering wheel became very stiff and the contact had to use extreme bodily force to turn the wheel. the vehicle was maneuvered to the shoulder and stopped. the contact examined the vehicle and noticed that the steering box was leaking. the vehicle was taken to an independent mechanic and the steering gear box was replaced. the failure recurred on an intermittent basis. the gear box was replaced approximately three times. the manufacturer was made aware of the failure, but offered no assistance. the failure mileage was 60,000. .Mileage was 60000 miles. Vehicle Identification Number (VIN):3D7KS28D98G. Dodge Ram 2500 2008 problem was reported in PEABODY, MA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 60 mph.

Dodge Ram 2500 2008 Suspension

Dodge Ram 2500 2008 Suspension Review #10430008

DODGE RAM 2500 2008 car safety problem was reported on Oct 03, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with SUSPENSION . i was i-77 in wv and hit a bridge expansion joint at approx. 70 m.p.h. the truck front suspension began to shake violently. the front tires and steering wheel began to shake/bounce uncontrollably. it did this for aprox 20 sec. while i tried to stop the truck slowly and safely. internet research revealed this is a common problem with dodge 2500 pickups. it has been given the name death wobble. i returned it to the dealer where they deny any knowledge of the problem and after inspection determined that the incident busted both front shocks and stabilizer bar. it was not covered by factory or extended warranty. i had 2 new shocks & stabilizer installed and the front end re-inspected and serviced, lined and balanced the tires as directed by dealer insp. results. i drove less than 10 miles and the truck done the death wobble again. they now suggest the tracking bar failure but state that the whole front suspension may be damaged due to a poor design and the violent vibration that occurred during the incidents. again the warranties are refusing coverage. the tech's refused to release the truck back to me to drive for safety reasons. they feel it is not safe to operate in this condition. this truck remains in stock condition. installing 285/70/16 tires 10 ply tires for safety concerns. the stock tires were too small for an 8000 lbs. pickup that tows occasionally. due to the seriously neglected safety concern by dodge, i will be trading this truck off when i get it fixed. dodge knows there is problems please step up and make them address this issue before someone get hurt or killed. *tr.Mileage was 42500 miles. Vehicle Identification Number (VIN):3D7KS28A28G. Dodge Ram 2500 2008 problem was reported in WHARNCLIFFE, WV. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 50 mph.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10430008

DODGE RAM 2500 2008 car safety problem was reported on Oct 03, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . i was i-77 in wv and hit a bridge expansion joint at approx. 70 m.p.h. the truck front suspension began to shake violently. the front tires and steering wheel began to shake/bounce uncontrollably. it did this for aprox 20 sec. while i tried to stop the truck slowly and safely. internet research revealed this is a common problem with dodge 2500 pickups. it has been given the name death wobble. i returned it to the dealer where they deny any knowledge of the problem and after inspection determined that the incident busted both front shocks and stabilizer bar. it was not covered by factory or extended warranty. i had 2 new shocks & stabilizer installed and the front end re-inspected and serviced, lined and balanced the tires as directed by dealer insp. results. i drove less than 10 miles and the truck done the death wobble again. they now suggest the tracking bar failure but state that the whole front suspension may be damaged due to a poor design and the violent vibration that occurred during the incidents. again the warranties are refusing coverage. the tech's refused to release the truck back to me to drive for safety reasons. they feel it is not safe to operate in this condition. this truck remains in stock condition. installing 285/70/16 tires 10 ply tires for safety concerns. the stock tires were too small for an 8000 lbs. pickup that tows occasionally. due to the seriously neglected safety concern by dodge, i will be trading this truck off when i get it fixed. dodge knows there is problems please step up and make them address this issue before someone get hurt or killed. *tr.Mileage was 42500 miles. Vehicle Identification Number (VIN):3D7KS28A28G. Dodge Ram 2500 2008 problem was reported in WHARNCLIFFE, WV. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 50 mph.

Dodge Ram 2500 2008 Engine And Engine Cooling

Dodge Ram 2500 2008 Engine And Engine Cooling Review #10430187

DODGE RAM 2500 2008 car safety problem was reported on Dec 29, 2008.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with ENGINE AND ENGINE COOLING . tl* the contact owns a 2008 dodge ram 2500 diesel. the contact stated that the check engine lamp illuminated. the contact mentioned that the failure occurred several times. the vehicle was taken to the dealer who diagnosed that the catalytic converter and oxygen sensors were defective and needed to be replaced. the remedy failed to repaired the problem. the vehicle was taken back to the dealer who diagnosed that the turbo and egr temp tube needed to be replaced. the manufacturer was made aware of the failure who did not offer any assistance. the vehicle was not repaired. the failure mileage was 2,951 and the current mileage was 45,000. .Mileage was 2951 miles. Vehicle Identification Number (VIN):3D7KS28A88G. Dodge Ram 2500 2008 problem was reported in RHINELANDER, WI. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Suspension

Dodge Ram 2500 2008 Suspension Review #10433738

DODGE RAM 2500 2008 car safety problem was reported on Oct 17, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with SUSPENSION . tl* the contact owns a 2008 dodge ram 2500. the contact was driving 10 mph when the front tires seized without warning. the vehicle was taken to the dealer who performed a diagnostic which located the failure at the front differential pinion gear bearing. the bearing had failed and caused the front tires to seize. the manufacturer was contacted and a complaint was filed. the manufacturer denied any assistance with repairs to the vehicle. the vehicle was not repaired. the failure and the current mileage was 71,941. .Mileage was 71941 miles. Vehicle Identification Number (VIN):3D7KS28A58G. Dodge Ram 2500 2008 problem was reported in LEBANON, MO. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10435516

DODGE RAM 2500 2008 car safety problem was reported on Nov 12, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact stated that he heard a loud clunking noise while turning at approximately 5 mph. the contact also lost control of the steering during the failure. the vehicle was then stopped and the contact noticed that the driver's side tie rod was fractured. the vehicle was towed to an authorized dealer and the contact was informed that the vehicle was not included in the recall associated with nhtsa campaign id number 11v350000 (steering:linkages:tie rod assembly). the vehicle was not repaired. the manufacturer was made aware of the failure and offered no assistance. the failure and the current mileages were 20,600. .Mileage was 20600 miles. Vehicle Identification Number (VIN):3D7KS28D48G. Dodge Ram 2500 2008 problem was reported in DEXTER, NY. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 5 mph.

Dodge Ram 2500 2008 Suspension

Dodge Ram 2500 2008 Suspension Review #10437350

DODGE RAM 2500 2008 car safety problem was reported on Nov 26, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with SUSPENSION . heading to town to take 2008 dodge ram to the dealership to have looked at for stalling at idle and no foot pedal response. shut truck off and restarted now i have throttle.. anyways headed to dealership to have these thing looked at. im on the interstate cruise control set at 70mph. i go over a slight dip on the interstate than experience what feels like two blown front tires. the entire truck is shaking violently. its all i can do to hold onto the steering wheel. the truck feels like its going to fall apart. i get on the brakes start pulling to the side of the road at about 10miles an hour this violent vibration stops. this incident was the scariest incident i've been through. i inspected the truck nothing visible wrong so i continued on to dealership with no problems.. 15 minutes later i stopped shaking. told service man at dealership what just happened and he says oh you just experienced the death wobble.. are you serious they have a nickname for this and are still selling these vehicles at 40,000 a piece. i refused to sign the work agreement and left the truck there. i will not pay to have this truck fixed. this vehicle is a serious danger to the driver, passengers and any other vehicles on the road. after research i found many other incidents of what i have described. go to youtube and type dodge death wobble. vehicle manufactures should be responsible for there product. concerned and productive united states citizen.. *tr.Mileage was 59500 miles. Vehicle Identification Number (VIN):3D7KS28A08G. Dodge Ram 2500 2008 problem was reported in BLACKFOOT, ID. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 70 mph.

Dodge Ram 2500 2008 Power Train

Dodge Ram 2500 2008 Power Train Review #10437350

DODGE RAM 2500 2008 car safety problem was reported on Nov 26, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with POWER TRAIN . heading to town to take 2008 dodge ram to the dealership to have looked at for stalling at idle and no foot pedal response. shut truck off and restarted now i have throttle.. anyways headed to dealership to have these thing looked at. im on the interstate cruise control set at 70mph. i go over a slight dip on the interstate than experience what feels like two blown front tires. the entire truck is shaking violently. its all i can do to hold onto the steering wheel. the truck feels like its going to fall apart. i get on the brakes start pulling to the side of the road at about 10miles an hour this violent vibration stops. this incident was the scariest incident i've been through. i inspected the truck nothing visible wrong so i continued on to dealership with no problems.. 15 minutes later i stopped shaking. told service man at dealership what just happened and he says oh you just experienced the death wobble.. are you serious they have a nickname for this and are still selling these vehicles at 40,000 a piece. i refused to sign the work agreement and left the truck there. i will not pay to have this truck fixed. this vehicle is a serious danger to the driver, passengers and any other vehicles on the road. after research i found many other incidents of what i have described. go to youtube and type dodge death wobble. vehicle manufactures should be responsible for there product. concerned and productive united states citizen.. *tr.Mileage was 59500 miles. Vehicle Identification Number (VIN):3D7KS28A08G. Dodge Ram 2500 2008 problem was reported in BLACKFOOT, ID. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 70 mph.

Dodge Ram 2500 2008 Vehicle Speed Control

Dodge Ram 2500 2008 Vehicle Speed Control Review #10437350

DODGE RAM 2500 2008 car safety problem was reported on Nov 26, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with VEHICLE SPEED CONTROL . heading to town to take 2008 dodge ram to the dealership to have looked at for stalling at idle and no foot pedal response. shut truck off and restarted now i have throttle.. anyways headed to dealership to have these thing looked at. im on the interstate cruise control set at 70mph. i go over a slight dip on the interstate than experience what feels like two blown front tires. the entire truck is shaking violently. its all i can do to hold onto the steering wheel. the truck feels like its going to fall apart. i get on the brakes start pulling to the side of the road at about 10miles an hour this violent vibration stops. this incident was the scariest incident i've been through. i inspected the truck nothing visible wrong so i continued on to dealership with no problems.. 15 minutes later i stopped shaking. told service man at dealership what just happened and he says oh you just experienced the death wobble.. are you serious they have a nickname for this and are still selling these vehicles at 40,000 a piece. i refused to sign the work agreement and left the truck there. i will not pay to have this truck fixed. this vehicle is a serious danger to the driver, passengers and any other vehicles on the road. after research i found many other incidents of what i have described. go to youtube and type dodge death wobble. vehicle manufactures should be responsible for there product. concerned and productive united states citizen.. *tr.Mileage was 59500 miles. Vehicle Identification Number (VIN):3D7KS28A08G. Dodge Ram 2500 2008 problem was reported in BLACKFOOT, ID. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 70 mph.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10438033

DODGE RAM 2500 2008 car safety problem was reported on Oct 10, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . i've got 40,000 miles on my 2008 2500 quad cab 6.7 cummins. the symptoms i noticed have been when driving down the road at highway speeds, suddenly it'll sound like i have a flat tire for about 2 seconds, then resume to normalcy. but when i slow to a stop, the truck shakes uncontrollably until you stop. it almost feels like i have a manual transmission, which i don't, and i don't downshift. i thought it was maybe a transmission problem, but i shifted to neutral and stopped, out of "drive", and it still shook uncontrollably. my truck does have the snow plow prep package on it, but i do not run a snow plow, and after researching the possibility of that last winter, i would never put a plow on a quad/diesel; or for that matter, any ram. *tr.Mileage was 38000 miles. Dodge Ram 2500 2008 problem was reported in BUFFALO LAKE, MN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 60 mph.

Dodge Ram 2500 2008 Suspension

Dodge Ram 2500 2008 Suspension Review #10438033

DODGE RAM 2500 2008 car safety problem was reported on Oct 10, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with SUSPENSION . i've got 40,000 miles on my 2008 2500 quad cab 6.7 cummins. the symptoms i noticed have been when driving down the road at highway speeds, suddenly it'll sound like i have a flat tire for about 2 seconds, then resume to normalcy. but when i slow to a stop, the truck shakes uncontrollably until you stop. it almost feels like i have a manual transmission, which i don't, and i don't downshift. i thought it was maybe a transmission problem, but i shifted to neutral and stopped, out of "drive", and it still shook uncontrollably. my truck does have the snow plow prep package on it, but i do not run a snow plow, and after researching the possibility of that last winter, i would never put a plow on a quad/diesel; or for that matter, any ram. *tr.Mileage was 38000 miles. Dodge Ram 2500 2008 problem was reported in BUFFALO LAKE, MN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 60 mph.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10438940

DODGE RAM 2500 2008 car safety problem was reported on Nov 27, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . was attempting to back the truck up into driveway and had wheel turned all the way to the left. heard a high pitched screech and then lost all power steering and was unable to move steering wheel. had the truck towed to dealer to have repairs done on truck. dealer stated that it was the power steering gear box again. this will be the third one replaced in the truck since 5/3/2011. *tr.Mileage was 46000 miles. Vehicle Identification Number (VIN):3D7KS29AX8G. Dodge Ram 2500 2008 problem was reported in SPOTSWOOD, NJ. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 5 mph.

Dodge Ram 2500 2008 Steering Review #10439022

DODGE RAM 2500 2008 car safety problem was reported on May 06, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500 hd. the contact stated the steering box failed. the steering box failed three times after the dealer replaced it previously. while reversing out of a parking space and making a right hand turn the steering would not turn. it was very difficult to make the turns as the vehicle was being driven to the dealer. the dealer stated they will replace the orm steering box at the owners expense but there was a back order on the parts. the manufacturer was notified of the failure who advised that they would contact him within the next twenty four hours. the failure mileage was 25,000 and the current mileage was 35,000. .Mileage was 25000 miles. Vehicle Identification Number (VIN):3D7KS29A58G. Dodge Ram 2500 2008 problem was reported in BOONE, NC. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering Review #10439741

DODGE RAM 2500 2008 car safety problem was reported on Nov 11, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact stated that the steering would seize abnormally while driving at low speeds. the manufacturer was contacted and denied assistance with the repair. the manufacturer also advised that the vehicle was not included in the recall associated with nhtsa campaign id number:11v350000 (steering:linkages:tie rod assembly). the vehicle was not repaired. the failure mileage was 45,000 and the current mileage was 50,000. .Mileage was 45000 miles. Vehicle Identification Number (VIN):3D7K528D68G. Dodge Ram 2500 2008 problem was reported in BENNIGTON, NH. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Engine And Engine Cooling

Dodge Ram 2500 2008 Engine And Engine Cooling Review #10442180

DODGE RAM 2500 2008 car safety problem was reported on Dec 25, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with ENGINE AND ENGINE COOLING . tl* the contact owns a 2008 dodge ram 2500. the contact was driving approximately 65-70 mph when the vehicle stalled and the check engine light illuminated. the vehicle was towed to the dealer where they advised the contact that the converter deisel exhaust needed to be replaced. the vehicle was repaired. the manufacturer was contacted and they offered no assistance. the failure mileage was approximately 40,800. .Mileage was 40800 miles. Vehicle Identification Number (VIN):3D7KS28A48G. Dodge Ram 2500 2008 problem was reported in LAS VEGAS, NM. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 65 mph.

Dodge Ram 2500 2008 Suspension

Dodge Ram 2500 2008 Suspension Review #10442678

DODGE RAM 2500 2008 car safety problem was reported on Dec 13, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with SUSPENSION . tl* the contact owns a 2008 dodge ram 2500. the contact stated that both the upper and lower ball joints failed, resulting in a potential loss of directional stability in the steering wheel. the dealer was notified and advised the contact that there were no recalls for the failure. the vehicle was not repaired. the manufacturer was not notified of the failure. the vin was unknown. the failure mileage was 60,000. .Mileage was 60000 miles. Dodge Ram 2500 2008 problem was reported in NEWNAN, GA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering Linkages Tie Rod Assembly

Dodge Ram 2500 2008 Steering Linkages Tie Rod Assembly Review #10445419

DODGE RAM 2500 2008 car safety problem was reported on Jan 25, 2012.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING:LINKAGES:TIE ROD ASSEMBLY . tl* the contact owns a 2008 dodge ram 2500. the contact stated that while reversing, the steering wheel seized abnormally. the contact examined the vehicle and found that the front driver side tie rod was fractured. the vehicle was towed to the dealer but was not repaired. the failure and the current mileage was 17,000. updated 03/05/12*lj chrysler informed the consumer, the recall applied to the model years that were manufactured in a specific plant. chrysler stated the consumer's vehicle was not included in the recall. 03/07/12 updated .Mileage was 17000 miles. Vehicle Identification Number (VIN):3D7KS28A18G. Dodge Ram 2500 2008 problem was reported in FORT LAUDERDALE, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Dodge Ram 2500 2008 drive type:4WD. FUEL SYSTEM:Turbo. FUEL TYPE: DIESEL.

Dodge Ram 2500 2008 Steering Review #10449420

DODGE RAM 2500 2008 car safety problem was reported on Oct 01, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact stated that after having repairs performed on the vehicle under nhtsa campaign id number: 11v350000 (steering:linkages:tie rod assembly), the steering failed without warning while driving approximately 25 mph. the contact noticed that one wheel was wobbling. the vehicle was coasted to the side of the road and then towed to the nearest mechanic. after diagnosis, they advised him that the tie rod assembly needed to be replaced. the vehicle was repaired for the tie rod assembly. the manufacturer was contacted and they offered no assistance. the failure mileage was approximately 147,000. the vin was unavailable. updated 03/16/12*lj.Mileage was 147000 miles. Vehicle Identification Number (VIN):3D7KS28A38G. Dodge Ram 2500 2008 problem was reported in HOLTVILLE, CA. Original Owner. Vehicle was purchased on July 09, 2008. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Dodge Ram 2500 2008 drive type:4WD. FUEL SYSTEM:Turbo. FUEL TYPE: DIESEL. Dodge Ram 2500 2008 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 25 mph. DEALER'S NAME: JOHN HNE DODGE . DEALER'S TELEPHONE NUMBER: 619-297-4251 . DEALER'S ZIPCODE: 92108 .

Dodge Ram 2500 2008 Steering Linkages Tie Rod Assembly Review #10449420

DODGE RAM 2500 2008 car safety problem was reported on Oct 01, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING:LINKAGES:TIE ROD ASSEMBLY . tl* the contact owns a 2008 dodge ram 2500. the contact stated that after having repairs performed on the vehicle under nhtsa campaign id number: 11v350000 (steering:linkages:tie rod assembly), the steering failed without warning while driving approximately 25 mph. the contact noticed that one wheel was wobbling. the vehicle was coasted to the side of the road and then towed to the nearest mechanic. after diagnosis, they advised him that the tie rod assembly needed to be replaced. the vehicle was repaired for the tie rod assembly. the manufacturer was contacted and they offered no assistance. the failure mileage was approximately 147,000. the vin was unavailable. updated 03/16/12*lj.Mileage was 147000 miles. Vehicle Identification Number (VIN):3D7KS28A38G. Dodge Ram 2500 2008 problem was reported in HOLTVILLE, CA. Original Owner. Vehicle was purchased on July 09, 2008. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Dodge Ram 2500 2008 drive type:4WD. FUEL SYSTEM:Turbo. FUEL TYPE: DIESEL. Dodge Ram 2500 2008 TRANSMISSION TYPE: AUTO. VEHICLE SPEED: 25 mph. DEALER'S NAME: JOHN HNE DODGE . DEALER'S TELEPHONE NUMBER: 619-297-4251 . DEALER'S ZIPCODE: 92108 .

Dodge Ram 2500 2008 Steering Review #10449436

DODGE RAM 2500 2008 car safety problem was reported on Feb 25, 2012.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . while backing out of a parking space i heard the left steering linkage fall onto the other linkage. i had complied with the recall h46 on sept. 10, 2009 regarding the failed part. the ball joint stud had failed requiring the pickup to be towed for the replacement of the steering linkage. *tr.Mileage was 147000 miles. Vehicle Identification Number (VIN):3D7KS28A38G. Dodge Ram 2500 2008 problem was reported in HOLTVILLE, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Dodge Ram 2500 2008 drive type:4WD. FUEL TYPE: DIESEL. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2008 Visibility

Dodge Ram 2500 2008 Visibility Review #10450111

DODGE RAM 2500 2008 car safety problem was reported on Feb 28, 2012.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with VISIBILITY . tl* the contact owns a 2008 dodge ram 2500. the contact stated that the windshield wipers malfunctioned and the passenger side wiper would only operate rapidly. the vehicle was not taken to the dealer. the manufacturer was made aware of the failure who did not offer any assistance since the vehicle was not included in nhtsa campaign id number: 09v084000 (visibility:windshield wiper/washer:motor). the vehicle was not repaired. the failure and current mileage was 42,000. .Mileage was 42000 miles. Vehicle Identification Number (VIN):3D7KS26DX8G. Dodge Ram 2500 2008 problem was reported in BROOKVILLE, PA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10450594

DODGE RAM 2500 2008 car safety problem was reported on Jan 01, 2010.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact stated that whenever he attempted a turn, the vehicle would pull very sharply in the direction that he was turning. the vehicle was taken to an authorized dealer and the contact was informed that the failure was not related to nhtsa campaign id number 11v350000 (steering:linkages:tie rod assembly). the vehicle was not repaired. the manufacturer was made aware of the failure and offered no assistance. the failure mileage was 50,000. the vin was unavailable. .Mileage was 50000 miles. Dodge Ram 2500 2008 problem was reported in TEHACHAPI, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering Review #10454389

DODGE RAM 2500 2008 car safety problem was reported on Apr 05, 2012.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . right tie rod end broke off, very limited steering. *tr.Mileage was 100500 miles. Vehicle Identification Number (VIN):3D7KS28A68G. Dodge Ram 2500 2008 problem was reported in LINCOLN, NE. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 50 mph.

Dodge Ram 2500 2008 Steering Review #10455533

DODGE RAM 2500 2008 car safety problem was reported on Apr 16, 2012.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact stated that while driving 70 mph, the power steering assist of the vehicle. the contact was able to move off the roadway and inspected the vehicle where he found that the passenger side tie rod assembly was fractured. the contact took the vehicle to the dealer and was told that nhtsa campaign id number: 11v350000 (steering linkages: tie rod assembly) would only cover the front driver side wheel and not the front passenger side. the failure and the current mileage was 97,000. .Mileage was 97000 miles. Vehicle Identification Number (VIN):3G7K528A38G. Dodge Ram 2500 2008 problem was reported in ERSAH, IL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering Review #10458510

DODGE RAM 2500 2008 car safety problem was reported on May 11, 2012.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact stated while driving 15 mph, the passenger side front tie rod fell on the ground. the vehicle was towed to a local garage. the failure was located within the ball joints which separated due to defective material. a local mechanic replaced the steering pitman, steering arm, the cross shaft, nuts and bolts. the manufacturer was made aware of the failure. the failure mileage was 36,000 and the current mileage was 36,250. updated 06/26/12 *bf the consumer stated he could not just replace the failed part. he had to purchase the entire steering assembly, due to it being an upgrade. the cost of the steering assembly was $618.61. updated 06/27/12 updated 08/28/12*lj updated 09/12/12.0 person(s) were injured. 0 person(s) died.Mileage was 36000 miles. Vehicle Identification Number (VIN):3D7KS28A68G. Dodge Ram 2500 2008 problem was reported in KARNS CITY, PA. Vehicle was purchased on Mar 13, 2008. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Dodge Ram 2500 2008 drive type:4WD. FUEL SYSTEM:Turbo. FUEL TYPE: DIESEL. Dodge Ram 2500 2008 TRANSMISSION TYPE: MAN . VEHICLE SPEED: 15 mph. DEALER'S NAME: DIEHL DODGE . DEALER'S TELEPHONE NUMBER: 724-282-8898 . DEALER'S CITY: BUTLER . DEALER'S STATE CODE: PA. DEALER'S ZIPCODE: 16001 .

Dodge Ram 2500 2008 Steering Linkages Tie Rod Assembly

Dodge Ram 2500 2008 Steering Linkages Tie Rod Assembly Review #10458510

DODGE RAM 2500 2008 car safety problem was reported on May 11, 2012.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING:LINKAGES:TIE ROD ASSEMBLY . tl* the contact owns a 2008 dodge ram 2500. the contact stated while driving 15 mph, the passenger side front tie rod fell on the ground. the vehicle was towed to a local garage. the failure was located within the ball joints which separated due to defective material. a local mechanic replaced the steering pitman, steering arm, the cross shaft, nuts and bolts. the manufacturer was made aware of the failure. the failure mileage was 36,000 and the current mileage was 36,250. updated 06/26/12 *bf the consumer stated he could not just replace the failed part. he had to purchase the entire steering assembly, due to it being an upgrade. the cost of the steering assembly was $618.61. updated 06/27/12 updated 08/28/12*lj updated 09/12/12.0 person(s) were injured. 0 person(s) died.Mileage was 36000 miles. Vehicle Identification Number (VIN):3D7KS28A68G. Dodge Ram 2500 2008 problem was reported in KARNS CITY, PA. Vehicle was purchased on Mar 13, 2008. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Dodge Ram 2500 2008 drive type:4WD. FUEL SYSTEM:Turbo. FUEL TYPE: DIESEL. Dodge Ram 2500 2008 TRANSMISSION TYPE: MAN . VEHICLE SPEED: 15 mph. DEALER'S NAME: DIEHL DODGE . DEALER'S TELEPHONE NUMBER: 724-282-8898 . DEALER'S CITY: BUTLER . DEALER'S STATE CODE: PA. DEALER'S ZIPCODE: 16001 .

Dodge Ram 2500 2008 Suspension

Dodge Ram 2500 2008 Suspension Review #10458510

DODGE RAM 2500 2008 car safety problem was reported on May 11, 2012.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with SUSPENSION . tl* the contact owns a 2008 dodge ram 2500. the contact stated while driving 15 mph, the passenger side front tie rod fell on the ground. the vehicle was towed to a local garage. the failure was located within the ball joints which separated due to defective material. a local mechanic replaced the steering pitman, steering arm, the cross shaft, nuts and bolts. the manufacturer was made aware of the failure. the failure mileage was 36,000 and the current mileage was 36,250. updated 06/26/12 *bf the consumer stated he could not just replace the failed part. he had to purchase the entire steering assembly, due to it being an upgrade. the cost of the steering assembly was $618.61. updated 06/27/12 updated 08/28/12*lj updated 09/12/12.0 person(s) were injured. 0 person(s) died.Mileage was 36000 miles. Vehicle Identification Number (VIN):3D7KS28A68G. Dodge Ram 2500 2008 problem was reported in KARNS CITY, PA. Vehicle was purchased on Mar 13, 2008. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Dodge Ram 2500 2008 drive type:4WD. FUEL SYSTEM:Turbo. FUEL TYPE: DIESEL. Dodge Ram 2500 2008 TRANSMISSION TYPE: MAN . VEHICLE SPEED: 15 mph. DEALER'S NAME: DIEHL DODGE . DEALER'S TELEPHONE NUMBER: 724-282-8898 . DEALER'S CITY: BUTLER . DEALER'S STATE CODE: PA. DEALER'S ZIPCODE: 16001 .

Dodge Ram 2500 2008 Suspension Review #10467647

DODGE RAM 2500 2008 car safety problem was reported on June 01, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with SUSPENSION . death wobble, when driving at any speed, and hitting a bump with the wheel turned even ever so slightly either way, the wheel just gives that direction and the entire truck starts to go that direction. it is very nerve racking, and extremely dangerous. the forums are littered with people with the same issue looking for an answer, but we aren't coming up with one, all while throwing money away into parts that may or may not be bad. i've already had the tie rod failure that dodge has a recall on, but they say my truck was not effected by the recall, so that fell on me to replace. when i called dodge about the problem, they state that no one has reported this issue before so it is an isolated incident with my truck. however, a google search yields thousands of people with the same thing. can this be investigated in any way? these trucks have become dangerous to drive, or be around on the highways due to this 'death wobble'. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 75000 miles. Dodge Ram 2500 2008 problem was reported in MORGANTON, NC. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10467647

DODGE RAM 2500 2008 car safety problem was reported on June 01, 2011.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . death wobble, when driving at any speed, and hitting a bump with the wheel turned even ever so slightly either way, the wheel just gives that direction and the entire truck starts to go that direction. it is very nerve racking, and extremely dangerous. the forums are littered with people with the same issue looking for an answer, but we aren't coming up with one, all while throwing money away into parts that may or may not be bad. i've already had the tie rod failure that dodge has a recall on, but they say my truck was not effected by the recall, so that fell on me to replace. when i called dodge about the problem, they state that no one has reported this issue before so it is an isolated incident with my truck. however, a google search yields thousands of people with the same thing. can this be investigated in any way? these trucks have become dangerous to drive, or be around on the highways due to this 'death wobble'. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 75000 miles. Dodge Ram 2500 2008 problem was reported in MORGANTON, NC. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2008 Exterior Lighting

Dodge Ram 2500 2008 Exterior Lighting Review #10469015

DODGE RAM 2500 2008 car safety problem was reported on July 20, 2012.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with EXTERIOR LIGHTING . i was driving down the highway and about 10pm it was raining had wipers on in medium speed wipers kept stopping. had a lot of cars passing by me on coming lane and they would flash their lights to me to indicate my light was off but the switch is turn on in low beam position. had some friends following me that day as well and they told me that my brake light was not working nor my lights.. the following wednesday which would be july 25 2012 i took my truck to the dealership i bought from ,but all the lights work except for the cargo light and the low windshield wiper warning kept coming on.. the truck has been in there for a week now and on wednesday august 1 2012 i called the dealership to see what is wrong with my truck and the said the tipm has been fried and all the headlights, brake lights, turn signals and wipers does not work any more they have to replace the tipm. i only had the truck for one week and this went out already. it's not good dodge or chrysler should come up with something else so all the safety things don't fail all at once. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 75560 miles. Vehicle Identification Number (VIN):3D7KS29A98G. Dodge Ram 2500 2008 problem was reported in ANCHORAGE, AK. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 70 mph.

Dodge Ram 2500 2008 Electrical System

Dodge Ram 2500 2008 Electrical System Review #10469015

DODGE RAM 2500 2008 car safety problem was reported on July 20, 2012.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with ELECTRICAL SYSTEM . i was driving down the highway and about 10pm it was raining had wipers on in medium speed wipers kept stopping. had a lot of cars passing by me on coming lane and they would flash their lights to me to indicate my light was off but the switch is turn on in low beam position. had some friends following me that day as well and they told me that my brake light was not working nor my lights.. the following wednesday which would be july 25 2012 i took my truck to the dealership i bought from ,but all the lights work except for the cargo light and the low windshield wiper warning kept coming on.. the truck has been in there for a week now and on wednesday august 1 2012 i called the dealership to see what is wrong with my truck and the said the tipm has been fried and all the headlights, brake lights, turn signals and wipers does not work any more they have to replace the tipm. i only had the truck for one week and this went out already. it's not good dodge or chrysler should come up with something else so all the safety things don't fail all at once. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 75560 miles. Vehicle Identification Number (VIN):3D7KS29A98G. Dodge Ram 2500 2008 problem was reported in ANCHORAGE, AK. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 70 mph.

Dodge Ram 2500 2008 Visibility/wiper

Dodge Ram 2500 2008 Visibility/wiper Review #10469015

DODGE RAM 2500 2008 car safety problem was reported on July 20, 2012.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with VISIBILITY/WIPER . i was driving down the highway and about 10pm it was raining had wipers on in medium speed wipers kept stopping. had a lot of cars passing by me on coming lane and they would flash their lights to me to indicate my light was off but the switch is turn on in low beam position. had some friends following me that day as well and they told me that my brake light was not working nor my lights.. the following wednesday which would be july 25 2012 i took my truck to the dealership i bought from ,but all the lights work except for the cargo light and the low windshield wiper warning kept coming on.. the truck has been in there for a week now and on wednesday august 1 2012 i called the dealership to see what is wrong with my truck and the said the tipm has been fried and all the headlights, brake lights, turn signals and wipers does not work any more they have to replace the tipm. i only had the truck for one week and this went out already. it's not good dodge or chrysler should come up with something else so all the safety things don't fail all at once. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 75560 miles. Vehicle Identification Number (VIN):3D7KS29A98G. Dodge Ram 2500 2008 problem was reported in ANCHORAGE, AK. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 70 mph.

Dodge Ram 2500 2008 Engine

Dodge Ram 2500 2008 Engine Review #10469568

DODGE RAM 2500 2008 car safety problem was reported on July 28, 2012.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with ENGINE . tl* the contact owns a 2008 dodge 2500. the contact stated that the exhaust pipe overheated which caused the bed of the truck to melt. the vehicle was not taken to the dealer. the manufacturer was made aware of the failure who filed a report and did not offer any assistance since the vehicle was no longer under warranty. the vehicle was not repaired. the failure mileage was 74,000. .Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Mileage was 74000 miles. Vehicle Identification Number (VIN):3D7KS29A98G. Dodge Ram 2500 2008 problem was reported in HALIFAX, PA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Suspension

Dodge Ram 2500 2008 Suspension Review #10475969

DODGE RAM 2500 2008 car safety problem was reported on June 01, 2012.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with SUSPENSION . tl* the contact owns a 2008 dodge ram 2500. the contact stated that while driving 70 mph, the vehicle began to shake violently. the failure was experienced numerous times. the failure also recurred when driving at lower speeds or when driving over any road bumps. the vehicle was taken to the dealer who replaced the front tie rod but the failure was not corrected. the vin was not available. the failure mileage was 50,000 and the current mileage was 53,000..0 person(s) were injured. 0 person(s) died.Mileage was 50000 miles. Dodge Ram 2500 2008 problem was reported in MELBOURNE, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10478217

DODGE RAM 2500 2008 car safety problem was reported on Apr 18, 2012.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact stated that while driving 50 mph, the vehicle drove over a road bump and the steering wheel exhibited a violent shake. the contact took the vehicle to a dealer for a diagnostic test. the dealer rotated the tires but the service did not remedy the shaking failure. the contact took the vehicle back to the dealer who then informed the contact that the vehicle had been upgraded under nhtsa campaign id numbers: 11v350000 (steering:linkages:tie rod assembly) and 10e013000 (steering:gear box:shaft pitman). the contact was awaiting a call from the manufacturer regarding the suspension. the failure mileage was 37,000..0 person(s) were injured. 0 person(s) died.Mileage was 37000 miles. Vehicle Identification Number (VIN):3D7KS28D38G. Dodge Ram 2500 2008 problem was reported in CHARLESTON, WV. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 50 mph.

Dodge Ram 2500 2008 Steering Review #10482877

DODGE RAM 2500 2008 car safety problem was reported on Oct 30, 2012.DODGE RAM 2500 2008, manufactured by CHRYSLER GROUP LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact stated that while driving 10 mph, the tie rod assembly failed. the vehicle was taken to an independent mechanic for diagnosis where each tie rod end was replaced. in addition, the steering stabilizer was also replaced. the vehicle was repaired. the vin was not available. the failure and current mileage was 56,100. .0 person(s) were injured. 0 person(s) died.Mileage was 56100 miles. Dodge Ram 2500 2008 problem was reported in BRISTOL, VA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 10 mph.

Dodge Ram 2500 2008 Visibility Defroster/defogger System

Dodge Ram 2500 2008 Visibility Defroster/defogger System Review #10486605

DODGE RAM 2500 2008 car safety problem was reported on Nov 29, 2012.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with VISIBILITY:DEFROSTER/DEFOGGER SYSTEM . mode heat door failure causing defrost/heating problems when necessary. fogging of interior windows. *tr.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS28A48G. Dodge Ram 2500 2008 problem was reported in FITCHBURG, WI. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL.

Dodge Ram 2500 2008 Visibility/wiper

Dodge Ram 2500 2008 Visibility/wiper Review #10491525

DODGE RAM 2500 2008 car safety problem was reported on Dec 19, 2012.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with VISIBILITY/WIPER . turn signals had been operating erratically for about 10k miles. misty day, turned wiper switch on to intermittent, nothing. moved switch to continuous, nothing. pushed washer button, nothing. had 'smart switch' changed. wipers and washers worked immediately after delivery. less than 1 week and less than 1,000 miles later, no wipers. original and replacement switches were oe parts. can live without the turn signals. dangerous to operate in anything but sunny days without wipers and washers. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 56000 miles. Dodge Ram 2500 2008 problem was reported in SPEER, IL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 60 mph.

Dodge Ram 2500 2008 Exterior Lighting

Dodge Ram 2500 2008 Exterior Lighting Review #10491525

DODGE RAM 2500 2008 car safety problem was reported on Dec 19, 2012.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with EXTERIOR LIGHTING . turn signals had been operating erratically for about 10k miles. misty day, turned wiper switch on to intermittent, nothing. moved switch to continuous, nothing. pushed washer button, nothing. had 'smart switch' changed. wipers and washers worked immediately after delivery. less than 1 week and less than 1,000 miles later, no wipers. original and replacement switches were oe parts. can live without the turn signals. dangerous to operate in anything but sunny days without wipers and washers. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 56000 miles. Dodge Ram 2500 2008 problem was reported in SPEER, IL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 60 mph.

Dodge Ram 2500 2008 Electrical System

Dodge Ram 2500 2008 Electrical System Review #10491525

DODGE RAM 2500 2008 car safety problem was reported on Dec 19, 2012.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with ELECTRICAL SYSTEM . turn signals had been operating erratically for about 10k miles. misty day, turned wiper switch on to intermittent, nothing. moved switch to continuous, nothing. pushed washer button, nothing. had 'smart switch' changed. wipers and washers worked immediately after delivery. less than 1 week and less than 1,000 miles later, no wipers. original and replacement switches were oe parts. can live without the turn signals. dangerous to operate in anything but sunny days without wipers and washers. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 56000 miles. Dodge Ram 2500 2008 problem was reported in SPEER, IL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 60 mph.

Dodge Ram 2500 2008 Engine

Dodge Ram 2500 2008 Engine Review #10493003

DODGE RAM 2500 2008 car safety problem was reported on Aug 15, 2008.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with ENGINE . tl* the contact owns a 2008 dodge ram 2500. the contact stated that the vehicle would not respond to acceleration attempts. the vehicle was taken to the dealer for diagnostic testing. the technician advised that the turbo would have to be replaced. the vehicle was repaired however, the contact continued to experience the failure. the vehicle was taken to the dealer a second time. the technician then stated that the particulator system would have to be replaced. additionally, the exhaust system was leaking coolant. the technician advised the contact that the egr system would have to be replaced. the vehicle was not repaired. the approximate failure mileage was 13,000. .0 person(s) were injured. 0 person(s) died.Mileage was 13000 miles. Vehicle Identification Number (VIN):3D7KS29A88G. Dodge Ram 2500 2008 problem was reported in HASBROUCK HEIGHTS, NJ. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10501185

DODGE RAM 2500 2008 car safety problem was reported on Nov 22, 2010.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . this vehicle has an uncontrollable shaking with the front end. if you hit a bump ir a pothole you have to slow down until approximately 30-35 mph or possible stop to get the shaking to stop. it will vibrate anything off the dash. front end parts have been replaced, front end aligned, new tires, factory recall. i notified dodge, of course they know nothing about this.after researching this matter i found that several thousands of people have this problem and has been named the death wobble. any dodge from 2003-2008 has this. it is ridiculous that the dodge isn't held responsible for making an unsafe vehicle. this death wobble is still happening everyday when a bump is hit and is going to make someone wreck . *tr.0 person(s) were injured. 0 person(s) died.Mileage was 87000 miles. Vehicle Identification Number (VIN):3D7KS28A38G. Dodge Ram 2500 2008 problem was reported in MCCARLEY, MS. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 70 mph.

Dodge Ram 2500 2008 Suspension

Dodge Ram 2500 2008 Suspension Review #10501185

DODGE RAM 2500 2008 car safety problem was reported on Nov 22, 2010.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with SUSPENSION . this vehicle has an uncontrollable shaking with the front end. if you hit a bump ir a pothole you have to slow down until approximately 30-35 mph or possible stop to get the shaking to stop. it will vibrate anything off the dash. front end parts have been replaced, front end aligned, new tires, factory recall. i notified dodge, of course they know nothing about this.after researching this matter i found that several thousands of people have this problem and has been named the death wobble. any dodge from 2003-2008 has this. it is ridiculous that the dodge isn't held responsible for making an unsafe vehicle. this death wobble is still happening everyday when a bump is hit and is going to make someone wreck . *tr.0 person(s) were injured. 0 person(s) died.Mileage was 87000 miles. Vehicle Identification Number (VIN):3D7KS28A38G. Dodge Ram 2500 2008 problem was reported in MCCARLEY, MS. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 70 mph.

Dodge Ram 2500 2008 Suspension Review #10501352

DODGE RAM 2500 2008 car safety problem was reported on Nov 15, 2012.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with SUSPENSION . tl* the contact owns a 2008 dodge ram 2500. the contact stated that while driving 45 mph, he drove over a pot hole and the vehicle started shaking violently. the vehicle was taken to the dealer. the technician diagnosed that the upper and lower ball joints were defective and needed to the replaced. the manufacturer was not made aware of the failure. the vehicle was not repaired. the failure and current mileage was 75,000. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 75000 miles. Vehicle Identification Number (VIN):3D7KS28D68G. Dodge Ram 2500 2008 problem was reported in NILES, MI. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. Dodge Ram 2500 2008 drive type:4WD. FUEL TYPE: GAS. VEHICLE SPEED: 45 mph.

Dodge Ram 2500 2008 Power Train

Dodge Ram 2500 2008 Power Train Review #10503975

DODGE RAM 2500 2008 car safety problem was reported on Mar 12, 2013.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with POWER TRAIN . tl* the contact owns a 2008 dodge ram 2500. the contact stated that while traveling 70 mph, the transfer case failed. the vehicle was towed to a dealer where the failure could not be diagnosed. the vehicle was not repaired. the manufacturer was contacted about the failure. the failure mileage was 106,000. .0 person(s) were injured. 0 person(s) died.Mileage was 106000 miles. Vehicle Identification Number (VIN):3D7KS28D48G. Dodge Ram 2500 2008 problem was reported in ADA, OK. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 70 mph.

Dodge Ram 2500 2008 Power Train Review #10509914

DODGE RAM 2500 2008 car safety problem was reported on Apr 12, 2013.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with POWER TRAIN . tl* the contact owns a 2008 dodge ram 2500. the contact stated that the transfer case on the vehicle exploded while they were traveling 70 mph. the contact was able to pull over without incident. the contact spoke with the dealer and was not given a reason for the failure. the failure mileage and current mileages were 103,000. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 103000 miles. Vehicle Identification Number (VIN):3D7KS28A38G. Dodge Ram 2500 2008 problem was reported in SENTINEL, OK. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 70 mph.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10514304

DODGE RAM 2500 2008 car safety problem was reported on Aug 29, 2012.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . while traveling a windy country road at approx. 40-45 miles per hour, when making a curve and hitting a rough patch of road the vehicle front end started to shake violently. we slowed down to make shaking stop. this happens all the time when rounding a curve and hitting a rough spot in the road.feels like the front end is going to come off. very frightening. we took to dodge dealer and they could not find anything wrong with vehicle. looked on the internet and found this is common among dodge trucks and is called the death wobble and dodge takes no responsibility for this. i guess it is cheaper to pay law suits than do the right thing and fix affected vehicles. how many lives have to be spent before dodge is held accountable? *tr.0 person(s) were injured. 0 person(s) died.Mileage was 73000 miles. Vehicle Identification Number (VIN):3D7KS28A28G. Dodge Ram 2500 2008 problem was reported in VALLEY SPRINGS, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 40 mph.

Dodge Ram 2500 2008 Suspension

Dodge Ram 2500 2008 Suspension Review #10514304

DODGE RAM 2500 2008 car safety problem was reported on Aug 29, 2012.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with SUSPENSION . while traveling a windy country road at approx. 40-45 miles per hour, when making a curve and hitting a rough patch of road the vehicle front end started to shake violently. we slowed down to make shaking stop. this happens all the time when rounding a curve and hitting a rough spot in the road.feels like the front end is going to come off. very frightening. we took to dodge dealer and they could not find anything wrong with vehicle. looked on the internet and found this is common among dodge trucks and is called the death wobble and dodge takes no responsibility for this. i guess it is cheaper to pay law suits than do the right thing and fix affected vehicles. how many lives have to be spent before dodge is held accountable? *tr.0 person(s) were injured. 0 person(s) died.Mileage was 73000 miles. Vehicle Identification Number (VIN):3D7KS28A28G. Dodge Ram 2500 2008 problem was reported in VALLEY SPRINGS, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 40 mph.

Dodge Ram 2500 2008 Engine

Dodge Ram 2500 2008 Engine Review #10514536

DODGE RAM 2500 2008 car safety problem was reported on May 30, 2013.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with ENGINE . tl* the contact owns a 2008 dodge ram 2500. the contact stated that while looking under hood, the engine caught fire. the fire was extinguished. the vehicle was not repaired and the manufacturer was notified. the approximate failure mileage was 59,472. *tr.Vehicle was on fire. 0 person(s) were injured. 0 person(s) died.Mileage was 59472 miles. Vehicle Identification Number (VIN):3D7KS26A98G. Dodge Ram 2500 2008 problem was reported in WEST FIELD, MA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10520042

DODGE RAM 2500 2008 car safety problem was reported on June 16, 2013.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . turning onto a driveway when leakage started from the steering box. the previous week had noticed wobbles at 55 mi./hr.hitting pot holes sent me to the opposing lane. already had suspension ( sway bars, pitman are, steering linkage redone after tie rod broke. still no one can figure where there's a leak in the cooling system. had to do body work out of pocket due to taking out a fence because of a defected tie rod,and paid for the tie rod, sway bars and links before i got the recall notice! took it in for recall on steering box, dealership did not replace because it was working fine at the time. now i have toe expenses and loss of wages because it finally broke. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 26700 miles. Vehicle Identification Number (VIN):3D7KS28C65G. Dodge Ram 2500 2008 problem was reported in SPRINGVILLE, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 5 mph.

Dodge Ram 2500 2008 Suspension

Dodge Ram 2500 2008 Suspension Review #10523988

DODGE RAM 2500 2008 car safety problem was reported on May 11, 2013.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with SUSPENSION . while driving at highway speeds, if the vehicle hits any pot hole, road change, or turning slightly left, the front end will start to uncontrollably shake. it becomes very violent and hard to control until i slow down to under 60 mph. i have had multiple dealers look at the issue and tell me they have seen this issue before but there is nothing they can do for me as no front end parts are worn out. they then state that they have an "upgrade" front end kit i can purchase for $2,500 that will maybe fix it. i ask them if it is a known issue then why doesn't chrysler recall the front ends and fix the issue, they reply that chrysler does not claim there is any issue present. i have checked all over the internet and this issue seems to affect hundreds of thousands of people as manufactures make after-market "death-wobble" fix kits. it is very frustrating to have to possibly pay out of pocket for a fix that might not work. this truck has been nothing but issues for me. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 80000 miles. Dodge Ram 2500 2008 problem was reported in MOUND, MN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 60 mph.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10523988

DODGE RAM 2500 2008 car safety problem was reported on May 11, 2013.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . while driving at highway speeds, if the vehicle hits any pot hole, road change, or turning slightly left, the front end will start to uncontrollably shake. it becomes very violent and hard to control until i slow down to under 60 mph. i have had multiple dealers look at the issue and tell me they have seen this issue before but there is nothing they can do for me as no front end parts are worn out. they then state that they have an "upgrade" front end kit i can purchase for $2,500 that will maybe fix it. i ask them if it is a known issue then why doesn't chrysler recall the front ends and fix the issue, they reply that chrysler does not claim there is any issue present. i have checked all over the internet and this issue seems to affect hundreds of thousands of people as manufactures make after-market "death-wobble" fix kits. it is very frustrating to have to possibly pay out of pocket for a fix that might not work. this truck has been nothing but issues for me. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 80000 miles. Dodge Ram 2500 2008 problem was reported in MOUND, MN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 60 mph.

Dodge Ram 2500 2008 Engine

Dodge Ram 2500 2008 Engine Review #10533465

DODGE RAM 2500 2008 car safety problem was reported on Oct 27, 2011.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with ENGINE . purchased our truck in june of 2010 from a local dodge dealer. the truck only had 23k and seemed to run okay besides getting crap gas mileage. in late october 2011 the check engine light came on but when we started it up the next morning the light was no longer illuminated.the light stayed off for about two weeks but then the vehicle started running poorly. it would randomly lose power when beginning to accelerate and make a sound almost like a backfire. the first couple of times it began to pick up speed after the initial hesitation but shortly after that the check engine light came on again and it wouldn't go above 10mph. we pulled off to the side of the road and turn it off. when the truck was restarted the light went off and it ran normally again. the truck was taken to the dealership the following day and we were told that even though our truck had less than 40k miles on it, the warranty had expired two weeks previously and they would not cover the cost to diagnose or repair it!!! we did not have the $ to do anything right then so out of desperation i began researching what could possibly be causing the issues with hopes of finding an inexpensive fix that we might be able to do on our own. this is when i learned that chrysler had issued two recalls, g30 - replace the oxygen sensor module & j35 - reprogram/update the ecm. neither of these were mentioned to us at the dealership when we brought the vehicle nor when we brought it in with these issues and were turned away. i did find out that the re-programming and update had been completed on the truck 5/24/2010. however, i have also since read about many owners continuing to have the same issues after the required "fix" had been completed just as we have. we're left with a truck that's a hazard to drive and pray that it doesn't cut out in front of oncoming traffic while trying to get out onto a road or even worse. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 34000 miles. Vehicle Identification Number (VIN):3D7KS28A68G. Dodge Ram 2500 2008 problem was reported in MCMINNVILLE, OR. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL.

Dodge Ram 2500 2008 Fuel System, Diesel

Dodge Ram 2500 2008 Fuel System, Diesel Review #10533465

DODGE RAM 2500 2008 car safety problem was reported on Oct 27, 2011.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with FUEL SYSTEM, DIESEL . purchased our truck in june of 2010 from a local dodge dealer. the truck only had 23k and seemed to run okay besides getting crap gas mileage. in late october 2011 the check engine light came on but when we started it up the next morning the light was no longer illuminated.the light stayed off for about two weeks but then the vehicle started running poorly. it would randomly lose power when beginning to accelerate and make a sound almost like a backfire. the first couple of times it began to pick up speed after the initial hesitation but shortly after that the check engine light came on again and it wouldn't go above 10mph. we pulled off to the side of the road and turn it off. when the truck was restarted the light went off and it ran normally again. the truck was taken to the dealership the following day and we were told that even though our truck had less than 40k miles on it, the warranty had expired two weeks previously and they would not cover the cost to diagnose or repair it!!! we did not have the $ to do anything right then so out of desperation i began researching what could possibly be causing the issues with hopes of finding an inexpensive fix that we might be able to do on our own. this is when i learned that chrysler had issued two recalls, g30 - replace the oxygen sensor module & j35 - reprogram/update the ecm. neither of these were mentioned to us at the dealership when we brought the vehicle nor when we brought it in with these issues and were turned away. i did find out that the re-programming and update had been completed on the truck 5/24/2010. however, i have also since read about many owners continuing to have the same issues after the required "fix" had been completed just as we have. we're left with a truck that's a hazard to drive and pray that it doesn't cut out in front of oncoming traffic while trying to get out onto a road or even worse. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 34000 miles. Vehicle Identification Number (VIN):3D7KS28A68G. Dodge Ram 2500 2008 problem was reported in MCMINNVILLE, OR. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL.

Dodge Ram 2500 2008 Power Train

Dodge Ram 2500 2008 Power Train Review #10551648

DODGE RAM 2500 2008 car safety problem was reported on Apr 22, 2009.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with POWER TRAIN . 2008 dodge ram 2500 6.7l 6spd...driving home from work and starting hearing a clunking sound. made appointment to drop off at dealer. dealer said the spare tire was loose and reinstalled. picked truck up drove home started to clunk again. check the truck out myself and found transfer case bolts broken off. i was not going to waste fuel to take it back, installed bolts myself. at about 22,000 miles clunking again, found bolts broken again. made appointment dropped off to have repaired. truck now has 88,500 on it and i've replaced the bolts about 7 times now. seems like every 10,000 to 15,000 miles they break. will be replacing bolts again. it feels like the rear end is sliding out when you make a turn when the bolts are broken. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 10688 miles. Vehicle Identification Number (VIN):3D7KS28A88G. Dodge Ram 2500 2008 problem was reported in GIBBSBORO, NJ. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10556960

DODGE RAM 2500 2008 car safety problem was reported on Apr 25, 2013.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . was driving at approx 55mph and drove over a patched spot in road and the vehicle began to vibrate/shake uncontrollably until i brake or slowed the vehicle to approx 35 mph. this has occurred on 3 occassions since the initial event and two times has created a very unsafe condition while in interstate/highway traffic that almost caused 2 accidents with me trying to slow and pull off the road to gain control of the vehicle. this vehicle milage is about 98% highway milage. i am told by the local dodge dealer this is not related to the current recalls. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 81000 miles. Vehicle Identification Number (VIN):3D7KS28D38G. Dodge Ram 2500 2008 problem was reported in RUSSIAVILLE, IN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 55 mph.

Dodge Ram 2500 2008 Wheels

Dodge Ram 2500 2008 Wheels Review #10556960

DODGE RAM 2500 2008 car safety problem was reported on Apr 25, 2013.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with WHEELS . was driving at approx 55mph and drove over a patched spot in road and the vehicle began to vibrate/shake uncontrollably until i brake or slowed the vehicle to approx 35 mph. this has occurred on 3 occassions since the initial event and two times has created a very unsafe condition while in interstate/highway traffic that almost caused 2 accidents with me trying to slow and pull off the road to gain control of the vehicle. this vehicle milage is about 98% highway milage. i am told by the local dodge dealer this is not related to the current recalls. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 81000 miles. Vehicle Identification Number (VIN):3D7KS28D38G. Dodge Ram 2500 2008 problem was reported in RUSSIAVILLE, IN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. FUEL TYPE: GAS. VEHICLE SPEED: 55 mph.

Dodge Ram 2500 2008 Visibility

Dodge Ram 2500 2008 Visibility Review #10558302

DODGE RAM 2500 2008 car safety problem was reported on Jan 03, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with VISIBILITY . tl* the contact owns a 2008 dodge ram 2500. the contact stated that while driving 35 mph, the windshield wipers failed. the vehicle was not taken to the dealer. the manufacturer was made aware of the failure but did not offer any assistance since the vehicle was not included in recall nhtsa campaign number: 09v084000 (visibility) . the vehicle was not repaired. the failure and current mileage was 129,000. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 129000 miles. Vehicle Identification Number (VIN):3D7KS29A78G. Dodge Ram 2500 2008 problem was reported in STREETSBORO, OH. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 35 mph.

Dodge Ram 2500 2008 Visibility/wiper

Dodge Ram 2500 2008 Visibility/wiper Review #10558302

DODGE RAM 2500 2008 car safety problem was reported on Jan 03, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with VISIBILITY/WIPER . tl* the contact owns a 2008 dodge ram 2500. the contact stated that while driving 35 mph, the windshield wipers failed. the vehicle was not taken to the dealer. the manufacturer was made aware of the failure but did not offer any assistance since the vehicle was not included in recall nhtsa campaign number: 09v084000 (visibility) . the vehicle was not repaired. the failure and current mileage was 129,000. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 129000 miles. Vehicle Identification Number (VIN):3D7KS29A78G. Dodge Ram 2500 2008 problem was reported in STREETSBORO, OH. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 35 mph.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10559005

DODGE RAM 2500 2008 car safety problem was reported on Dec 20, 2013.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500 heavy duty. the contact received notification of nhtsa campaign number: 13v529000 (steering) and the part needed to repair the vehicle was unavailable until april. the manufacturer was not made aware of the problem. the contact had not experienced a failure. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS28A08G. Dodge Ram 2500 2008 problem was reported in DALHART, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering Review #10559018

DODGE RAM 2500 2008 car safety problem was reported on Jan 01, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact stated that nhtsa campaign number: 13v529000 (steering) had surpassed the reasonable time for repair. the dealer was contacted and stated the part was not available for repair and they were only allowed to order one part per week. the contact stated he noticed a crunching sound when turning the steering wheel at low speeds. the vehicle was not repaired. the approximate failure mileage was 75,000. .0 person(s) were injured. 0 person(s) died.Mileage was 75000 miles. Vehicle Identification Number (VIN):3D7KS28T99G. Dodge Ram 2500 2008 problem was reported in LA VALE, MD. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2008 Steering Review #10559217

DODGE RAM 2500 2008 car safety problem was reported on Dec 01, 2013.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact stated that nhtsa campaign number 13v529000 (steering) had exceeded a reasonable time for repair. the manufacturer advised that the dealer would receive one part per month and they were not sure when the part would arrive. the contact had not experienced a failure. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS28A08G. Dodge Ram 2500 2008 problem was reported in BURNS, WY. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering Review #10559570

DODGE RAM 2500 2008 car safety problem was reported on Jan 09, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact received notification of nhtsa campaign number: 13v529000 (steering) however, the part needed to repair the vehicle was unavailable until april. the dealer was unable to provide an expected date for the part to become available. the manufacturer was made aware of the problem. the contact had not experienced the failure. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS26DX8G. Dodge Ram 2500 2008 problem was reported in WHEELING, WV. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering Review #10559667

DODGE RAM 2500 2008 car safety problem was reported on Dec 30, 2013.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact stated nhtsa campaign number: 13v529000 (steering) had surpassed the reasonable time for repair. the dealer was contacted and stated the part was not available for repair. the manufacturer was not contacted. the vehicle was not repaired. the contact had not experienced a failure..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS28A78G. Dodge Ram 2500 2008 problem was reported in JEROMESVILLE, OH. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering Review #10560876

DODGE RAM 2500 2008 car safety problem was reported on Jan 21, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . n49 recall. i have been advised by the dealer that the wait time will be approximately 45 weeks before the recall repair can be conducted. this is not a "reasonable" timeframe. *tr.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS28A28G. Dodge Ram 2500 2008 problem was reported in CLOUDCROFT, NM. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL.

Dodge Ram 2500 2008 Steering Review #10560929

DODGE RAM 2500 2008 car safety problem was reported on Jan 02, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact received notification of nhtsa campaign id number: 13v529000 (steering ) in early january 2014. the contact stated that he took the vehicle to the dealer to get it repaired but the dealer stated that parts needed to complete the recall repair were unavailable. the vehicle was not repaired. the manufacturer was not notified. the contact had not experienced a failure. *tr.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS29AX8G. Dodge Ram 2500 2008 problem was reported in ALAMOSA, CO. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL.

Dodge Ram 2500 2008 Steering Review #10561018

DODGE RAM 2500 2008 car safety problem was reported on Jan 03, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact stated that while driving approximately 35 mph, he suddenly lost control of the steering wheel and crashed into a ditch. the contact was not injured and was able to exit the vehicle to further inspect the vehicle. he then discovered that the front passenger¿s side tie rod was fractured. the contact notified the manufacturer of the failure, who sent a representative to further examine the failure. the representative concluded that the defect was erroneous. the manufacturer informed the contact that no assistance would be provided. the vehicle was not repaired. the vin was not available. the failure mileage was 94,000. *tr.Vehicle was involved in a crash. 0 person(s) were injured. 0 person(s) died.Mileage was 94000 miles. Dodge Ram 2500 2008 problem was reported in BLOOMFIELD, MT. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 35 mph.

Dodge Ram 2500 2008 Wheels

Dodge Ram 2500 2008 Wheels Review #10561795

DODGE RAM 2500 2008 car safety problem was reported on Jan 08, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with WHEELS . tl* the contact owns a 2008 dodge ram 2500. the contact stated that while driving approximately 20 mph, a loud noise emitted from the rear end of the vehicle. the contact soon discovered that the tire well cable was fractured and caused the spare tire to become detached from the vehicle. the tire was then retrieved and placed inside the vehicle temporarily. the manufacturer was not notified of the problem. the approximate failure mileage was 117,000. .0 person(s) were injured. 0 person(s) died.Mileage was 117000 miles. Vehicle Identification Number (VIN):3D7KS28C76G. Dodge Ram 2500 2008 problem was reported in FORT PIERCE, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 20 mph.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10561860

DODGE RAM 2500 2008 car safety problem was reported on Jan 28, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact stated that he attempted to have the vehicle repaired under nhtsa campaign number: 13v529000 (steering) but was informed that the parts were not available and that the deakler was only receiving one part per week. the contact felt that since the failure was reported in november of 2013, there should be a remedy available before january of 2014. the contact stated that the manufacturer had exceeded a reasonable time for repair. the contact had not experienced a failure. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS26D48G. Dodge Ram 2500 2008 problem was reported in EVART, MI. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering Review #10562028

DODGE RAM 2500 2008 car safety problem was reported on Jan 01, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . 2008 dodge ram 2500. consumer writes in regards to the length of time to complete tie rod ball stud recall notice. *smd the dealer informed the consumer, they were only allowed to order one set of parts, once every two weeks. *jb.Vehicle Identification Number (VIN):3D7KS26A38G. Dodge Ram 2500 2008 problem was reported in FEDERAL WAY, WA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Dodge Ram 2500 2008 drive type:4WD. FUEL SYSTEM:Turbo. FUEL TYPE: DIESEL. DEALER'S NAME: CAR PROS RENTON . DEALER'S TELEPHONE NUMBER: 425-430-1000 . DEALER'S CITY: RENTON . DEALER'S STATE CODE: WA. DEALER'S ZIPCODE: 98057 .

Dodge Ram 2500 2008 Steering Review #10562696

DODGE RAM 2500 2008 car safety problem was reported on Jan 06, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . safety recall - chrysler has recalled left tie rod n49/nhtsa 13v-529. recall notice states "if your dealer fails or is unable to remedy this defect without charge and within reasonable time, you may submit a written complaint...." to this website. when dealer was called - see dee motors anaconda, mt - 59711 - service manager mentioned that chrysler is only allowing 1 tie rod end part per week. i have 24 appointments ahead of me. i am on a waiting list but 4 months of wait time is "not reasonable".... *tr.0 person(s) were injured. 0 person(s) died.Mileage was 40000 miles. Vehicle Identification Number (VIN):3D7KS28A58G. Dodge Ram 2500 2008 problem was reported in MT, MT. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2008 Steering Review #10562915

DODGE RAM 2500 2008 car safety problem was reported on Jan 15, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . this vehicle was recalled because of a problem with the steering linkage that could cause the driver to lose control of the vehicle and crash. when we took it to the dealer to verify the problem we were told that the defective part needed to be replaced but it would take 6 months because the manufacturer (chrysler) only ships 1 part per week to dealers. in other words, we have to drive a defective truck with a 4 year old child in the back seat for six months because there is a backlog of trucks needing the part replaced. is this ok with your agency? does president obama agree with this? *tr.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS28A28G. Dodge Ram 2500 2008 problem was reported in RUSSELLVILLE, AL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL.

Dodge Ram 2500 2008 Steering Review #10562947

DODGE RAM 2500 2008 car safety problem was reported on Feb 04, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . i appreciate your hard work in establishing safety recall n49/nhtsa 13v-529 affecting 2008-2012 ram trucks where "the left tie rod ball stud may fracture causing loss of directional control and/or crash without warning." but, i contacted my dodge dealer in bellingham, wa on jan 6, 2014 as instructed by chrysler and have had 2 service appointments cancelled because they do not have the parts yet. my dealer is telling me that i may have to wait another 4 months or more. i am still number 15 on the list of over 70 requests and they tell me they are only allowed 1 part per week from the factory and sometimes don't even get that. i called 2 other dodge dealers in nw washington and got a similar story. one dealer told me the factory needed the parts to still make new trucks which is limiting the supply for the recall, but not to worry because he had only seen one serious steering failure from this problem so far...! driving my truck with the thought of suddenly loosing steering control without warning for another 4 months doesn't make me feel all that safe or responsible. nor the thought of all the other trucks out there that may have to wait another year or more to be fixed. is this type of delay normal with such a serious recall? thank you for your time and concern. [xxx] information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6). *tr.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS28D98G. Dodge Ram 2500 2008 problem was reported in BELLINGHAM, WA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. FUEL TYPE: GAS.

Dodge Ram 2500 2008 Steering Review #10563250

DODGE RAM 2500 2008 car safety problem was reported on Dec 19, 2013.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact received notification of nhtsa campaign number: 13v529000 (steering); however, the dealer stated that the part was unavailable. the dealer was unable to provide an expected date for the part to become available. the manufacturer was made aware of the problem. there are no failures at this time. ..updated 04-23-14 *bf .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS28A98G. Dodge Ram 2500 2008 problem was reported in NORTH LAS VEGAS, NV. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering Review #10563374

DODGE RAM 2500 2008 car safety problem was reported on Dec 01, 2013.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact stated that nhtsa campaign number 13v529000 (steering) had exceeded a reasonable time for repair. the dealer advised they received one part per week and the contact was on a three month waiting list. the manufacturer advised the part was restricted. the contact had not experienced a failure. updated 03/21/14*lj updated 3/28/2014 *js.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS28A48G. Dodge Ram 2500 2008 problem was reported in WARRENTON, MO. Original Owner. Vehicle was purchased on Jan 01, 2008. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Dodge Ram 2500 2008 drive type:4WD. Dodge Ram 2500 2008 TRANSMISSION TYPE: AUTO. DEALER'S NAME: SPEEDWAYY DODGE . DEALER'S CITY: LANSING . DEALER'S STATE CODE: KS.

Dodge Ram 2500 2008 Steering Review #10563383

DODGE RAM 2500 2008 car safety problem was reported on Feb 07, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . there is a recall on the left tie rod on my truck. the letter states that the tie rod can break and cause an a loss of control or crash without warning. i called my dealership, classic motors in richfield ut 435- 896-4441 and they put me on a waiting list that is one and one half years long! i have a truck that may crash at any moment without warning and my dealer can not get parts for 18 months. they can only get one part a week and they over 75 trucks in front of me. this seems completely unacceptable to me. they are creating a huge liability problem for themselves. please help me remedy this issue quicker. *tr.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS28D18G. Dodge Ram 2500 2008 problem was reported in CENTRAL VALLEY, UT. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. FUEL TYPE: GAS.

Dodge Ram 2500 2008 Vehicle Speed Control

Dodge Ram 2500 2008 Vehicle Speed Control Review #10564339

DODGE RAM 2500 2008 car safety problem was reported on Jan 31, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with VEHICLE SPEED CONTROL . tl-the contact owns a 2008 dodge ram 2500. the contact stated while departing from the driveway driving approximately 2 mph, there was a loud sound from the bottom of the vehicle. he had a previous recall repaired by the manufacturer campaign id number(n49/nhtsa13v-529). the manufacturer was notified of the failure. the previous failure was repaired by an authorized dealer. the ball joint to the steering broke as he was traveling and the vehicle had to be towed to an authorized dealer. the vehicle was repaired for a different problem not related to the recall. the failure mileage was 47,000. dyd *tr.0 person(s) were injured. 0 person(s) died.Mileage was 47000 miles. Vehicle Identification Number (VIN):3D7KS28A38G. Dodge Ram 2500 2008 problem was reported in JOSHUA TREE, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 2 mph.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10564339

DODGE RAM 2500 2008 car safety problem was reported on Jan 31, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl-the contact owns a 2008 dodge ram 2500. the contact stated while departing from the driveway driving approximately 2 mph, there was a loud sound from the bottom of the vehicle. he had a previous recall repaired by the manufacturer campaign id number(n49/nhtsa13v-529). the manufacturer was notified of the failure. the previous failure was repaired by an authorized dealer. the ball joint to the steering broke as he was traveling and the vehicle had to be towed to an authorized dealer. the vehicle was repaired for a different problem not related to the recall. the failure mileage was 47,000. dyd *tr.0 person(s) were injured. 0 person(s) died.Mileage was 47000 miles. Vehicle Identification Number (VIN):3D7KS28A38G. Dodge Ram 2500 2008 problem was reported in JOSHUA TREE, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 2 mph.

Dodge Ram 2500 2008 Suspension

Dodge Ram 2500 2008 Suspension Review #10564915

DODGE RAM 2500 2008 car safety problem was reported on Jan 06, 2012.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with SUSPENSION . received recall - left side ball stud to replace. called local dealer jan 6. instructed to call back in 7 - 10 days - called back jan 13 -- told to come in, so not need appointment. ( 45 miles to dealer one way) visited dealer on jan 14th - looked at truck and informed me that they had to order parts. -- called jan 24th - will call us in a couple of days, no call. called feb 4th - told our parts were not in and did not know when the parts would be in. informed that chrysler was only giving the dealer one set a week. to date (feb 19th, 2014) we have not received a call from dealer, replacement is not completed. note: notification stated that the ball stud on my truck may fracture under certain driving conditions and this could cause a loss of directional control and or crash without warning. to me this is serious and needs attention ! this truck is used to haul cattle & horses & farm duty. i am concerned. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 50000 miles. Vehicle Identification Number (VIN):3D7KS28A78G. Dodge Ram 2500 2008 problem was reported in SPRAGUE RIVER, OR. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL.

Dodge Ram 2500 2008 Structure

Dodge Ram 2500 2008 Structure Review #10564915

DODGE RAM 2500 2008 car safety problem was reported on Jan 06, 2012.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STRUCTURE . received recall - left side ball stud to replace. called local dealer jan 6. instructed to call back in 7 - 10 days - called back jan 13 -- told to come in, so not need appointment. ( 45 miles to dealer one way) visited dealer on jan 14th - looked at truck and informed me that they had to order parts. -- called jan 24th - will call us in a couple of days, no call. called feb 4th - told our parts were not in and did not know when the parts would be in. informed that chrysler was only giving the dealer one set a week. to date (feb 19th, 2014) we have not received a call from dealer, replacement is not completed. note: notification stated that the ball stud on my truck may fracture under certain driving conditions and this could cause a loss of directional control and or crash without warning. to me this is serious and needs attention ! this truck is used to haul cattle & horses & farm duty. i am concerned. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 50000 miles. Vehicle Identification Number (VIN):3D7KS28A78G. Dodge Ram 2500 2008 problem was reported in SPRAGUE RIVER, OR. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10565616

DODGE RAM 2500 2008 car safety problem was reported on Jan 03, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . recall issued but dealer can not get parts. safety recall n49/nhtsa 13v-529 we have limited number of days to have this replaced as we are planning a 5,000 mile trip with this pickup pulling a 35 ft travel trailer. *tr.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS28A58G. Dodge Ram 2500 2008 problem was reported in COLFAX, WA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL.

Dodge Ram 2500 2008 Suspension

Dodge Ram 2500 2008 Suspension Review #10565616

DODGE RAM 2500 2008 car safety problem was reported on Jan 03, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with SUSPENSION . recall issued but dealer can not get parts. safety recall n49/nhtsa 13v-529 we have limited number of days to have this replaced as we are planning a 5,000 mile trip with this pickup pulling a 35 ft travel trailer. *tr.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS28A58G. Dodge Ram 2500 2008 problem was reported in COLFAX, WA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10565827

DODGE RAM 2500 2008 car safety problem was reported on Dec 09, 2013.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact stated recall nhtsa campaign number: 13v529000 (steering) had surpassed a reasonable about of time for repair. the dealer was contacted and simply stated that the part was not available. the manufacture was contacted and could not provide a time frame for when the repair was expected to begin. the vehicle was not repaired. the contact had not experienced a failure. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS28A98G. Dodge Ram 2500 2008 problem was reported in DEERFIELD BEACH, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering Review #10567582

DODGE RAM 2500 2008 car safety problem was reported on Sept 13, 2012.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact stated that while driving 70 mph over a road bump, the entire vehicle began to shake violently. the contact then coasted to the shoulder and was able to decelerate to a complete stop. the contact proceeded to drive and the vehicle functioned normally. the vehicle was not taken to the dealer for inspection. the vehicle was not repaired. the manufacturer was notified. the failure mileage was 40,000. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 40000 miles. Vehicle Identification Number (VIN):3D7KS26A28G. Dodge Ram 2500 2008 problem was reported in SILVER CITY, NM. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 70 mph.

Dodge Ram 2500 2008 Steering Review #10568761

DODGE RAM 2500 2008 car safety problem was reported on Mar 12, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact stated that he received a recall notice for nhtsa campaign number 13v529000 (steering) and was informed by the dealer that the parts for the remedy were not available. the manufacturer was not contacted about the failure. updated 05/12/14*lj the consumer stated the failures ranged from moderate to violent shaking if the steering components after encountering rough highway conditions, while traveling at highway speeds. updated 05/14/14 *tr.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS28A28G. Dodge Ram 2500 2008 problem was reported in HAYDEN, ID. Original Owner. Vehicle was purchased on July 01, 2008. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.Vehicle had 6 CYLINDERS. Dodge Ram 2500 2008 drive type:4WD. FUEL SYSTEM:Turbo. FUEL TYPE: DIESEL. Dodge Ram 2500 2008 TRANSMISSION TYPE: MAN . DEALER'S NAME: TOM ADDIS DODGE .

Dodge Ram 2500 2008 Steering Review #10568817

DODGE RAM 2500 2008 car safety problem was reported on Mar 12, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact stated that he attempted to have the vehicle repaired under nhtsa campaign number: 13v529000 (steering) but was informed that the parts were not available. the contact felt that since the failure was reported in november of 2013, there should have been a remedy available before march of 2014. the contact stated that the manufacturer had exceeded a reasonable time for repair. the contact had not experienced a failure. *tr.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3V7KS28858G. Dodge Ram 2500 2008 problem was reported in ALLEYTON, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering Review #10572808

DODGE RAM 2500 2008 car safety problem was reported on Mar 17, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact stated that he attempted to have the vehicle repaired under nhtsa campaign number: 13v529000 (steering) but was informed that the parts were not available. the contact felt that since the failure was reported in november of 2013, there should have been a remedy available before march of 2014. the contact stated that the manufacturer had exceeded a reasonable time for repair. the contact had not experienced a failure. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS26D68G. Dodge Ram 2500 2008 problem was reported in MCCOOL JUNCTION, NE. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Suspension

Dodge Ram 2500 2008 Suspension Review #10573174

DODGE RAM 2500 2008 car safety problem was reported on Mar 12, 2013.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with SUSPENSION . tl* the contact owns a 2008 dodge ram 2500. the contact stated that while driving 20 mph, he heard a loud noise as the vehicle came to a complete stop. the contact mentioned that after inspecting the vehicle she noticed that the driver's side tie rod was fractured. the contact stated that she previously received notification for nhtsa campaign number: 13v529000 (steering) and had been waiting for the parts to become available. the vehicle was taken to an independent mechanic where the technician verified the failure and replaced the tie rod, upper and lower bolt joints. the manufacturer was made aware of the failure. the vehicle was repaired. the failure mileage was 48,000 and the current mileage was 60,000. .0 person(s) were injured. 0 person(s) died.Mileage was 48000 miles. Vehicle Identification Number (VIN):3D7KS28A38G. Dodge Ram 2500 2008 problem was reported in GREENVILLE, WI. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 20 mph.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10573174

DODGE RAM 2500 2008 car safety problem was reported on Mar 12, 2013.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact stated that while driving 20 mph, he heard a loud noise as the vehicle came to a complete stop. the contact mentioned that after inspecting the vehicle she noticed that the driver's side tie rod was fractured. the contact stated that she previously received notification for nhtsa campaign number: 13v529000 (steering) and had been waiting for the parts to become available. the vehicle was taken to an independent mechanic where the technician verified the failure and replaced the tie rod, upper and lower bolt joints. the manufacturer was made aware of the failure. the vehicle was repaired. the failure mileage was 48,000 and the current mileage was 60,000. .0 person(s) were injured. 0 person(s) died.Mileage was 48000 miles. Vehicle Identification Number (VIN):3D7KS28A38G. Dodge Ram 2500 2008 problem was reported in GREENVILLE, WI. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 20 mph.

Dodge Ram 2500 2008 Steering Review #10574689

DODGE RAM 2500 2008 car safety problem was reported on Jan 01, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact stated nhtsa campaign number: 13v529000 (steering) had surpassed reasonable amount of time for repair. the dealer stated the part was not available. the contact was placed a on a waiting list. the manufacturer was not alerted of the delay in the recall repair. the vehicle was not repaired. there are no failures at this time. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS28A18G. Dodge Ram 2500 2008 problem was reported in LITTLE ROCK, AR. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Visibility Defroster/defogger System

Dodge Ram 2500 2008 Visibility Defroster/defogger System Review #10574862

DODGE RAM 2500 2008 car safety problem was reported on Dec 18, 2013.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with VISIBILITY:DEFROSTER/DEFOGGER SYSTEM . the hvac blend doors where they interface with the actuator motor are broken. the plastic was too thin for the strength of the motor and sheared off. my windshield frosted up very quickly with the humidity in the cabin. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 110000 miles. Vehicle Identification Number (VIN):3D7KS28A18G. Dodge Ram 2500 2008 problem was reported in WATERTOWN, NY. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 50 mph.

Dodge Ram 2500 2008 Electrical System

Dodge Ram 2500 2008 Electrical System Review #10574862

DODGE RAM 2500 2008 car safety problem was reported on Dec 18, 2013.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with ELECTRICAL SYSTEM . the hvac blend doors where they interface with the actuator motor are broken. the plastic was too thin for the strength of the motor and sheared off. my windshield frosted up very quickly with the humidity in the cabin. *tr.0 person(s) were injured. 0 person(s) died.Mileage was 110000 miles. Vehicle Identification Number (VIN):3D7KS28A18G. Dodge Ram 2500 2008 problem was reported in WATERTOWN, NY. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 50 mph.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10574536

DODGE RAM 2500 2008 car safety problem was reported on Mar 03, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . 2008 dodge ram 2500. consumer writes in regards to left outer tie rod assembly recall reimbursement. *smd.Vehicle Identification Number (VIN):3D7KS28A08G. Dodge Ram 2500 2008 problem was reported in WASHINGTON, DC. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Dodge Ram 2500 2008 drive type:4WD. FUEL SYSTEM:Turbo. FUEL TYPE: DIESEL. DEALER'S NAME: DENHAM'S CRYSTAL CHRYSLER . DEALER'S TELEPHONE NUMBER: 780-998-0900 .

Dodge Ram 2500 2008 Steering Review #10576671

DODGE RAM 2500 2008 car safety problem was reported on Apr 02, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact stated that he attempted to have the vehicle repaired under nhtsa campaign number: 13v529000 (steering) but was informed that the parts were not available. the contact felt that since the failure was reported in november of 2013, there should have been a remedy available before april of 2014. the contact stated that the manufacturer had exceeded a reasonable time for repair. the contact had not experienced a failure. updated 5/19/14*cn.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS29A88G. Dodge Ram 2500 2008 problem was reported in WINSTON-SALEM, NC. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering Review #10578929

DODGE RAM 2500 2008 car safety problem was reported on Dec 18, 2013.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns 2008 dodge ram 2500. the contact received notification of nhtsa campaign id number 13v529000 (steering) and stated that the part needed was unavailable to perform the repair. the dealer was unable to provide an expected date for the remedy part to become available. the manufacturer was notified of the problem. the contact had not experienced a failure. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS28A08G. Dodge Ram 2500 2008 problem was reported in PEORIA, AZ. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering Review #10583206

DODGE RAM 2500 2008 car safety problem was reported on July 17, 2013.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact stated that he was concerned for his safety since the parts to repair recall nhtsa campaign number: 13v529000 (steering) were still not available. the contact mentioned that the tie rod had fractured previously and was now causing the tires wear prematurely. the dealer was contacted. the manufacturer was made aware of the problem. the vehicle was not repaired. the failure mileage was 98,000 and the current mileage was 115,000. .0 person(s) were injured. 0 person(s) died.Mileage was 98000 miles. Vehicle Identification Number (VIN):3D7KS28A58G. Dodge Ram 2500 2008 problem was reported in ITALY, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering Review #10583407

DODGE RAM 2500 2008 car safety problem was reported on May 01, 2013.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . i own a 2008 dodge ram 2500 with the faulty tie rod ends (recall l16 according to chrysler) which i found out on my own not from chrysler. i've attempted to get the problem resolved several times from several different dodge dealers however none of them have the parts to fix my truck. i was told they have no idea when anything will be available and hope for the best that it doesn't break. the problem is getting worse the longer this drags out and is to the point of i am scared to drive the truck. *tt.0 person(s) were injured. 0 person(s) died.Mileage was 63000 miles. Dodge Ram 2500 2008 problem was reported in CRYSTAL RIVER, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 70 mph.

Dodge Ram 2500 2008 Steering Review #10584280

DODGE RAM 2500 2008 car safety problem was reported on Apr 22, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact stated that she attempted to have her vehicle repaired under nhtsa campaign number: 13v529000 (steering) but was informed that the parts were not available and that the dealers were receiving one part per month. the contact felt that since the failure was reported in november of 2013, there should be a remedy available before april of 2014. the contact stated that the manufacturer had exceeded a reasonable time for repair. the contact had not experienced a failure..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS26D48G. Dodge Ram 2500 2008 problem was reported in TUPLO, MS. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering Review #10584896

DODGE RAM 2500 2008 car safety problem was reported on Dec 16, 2013.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact received a notice for nhtsa campaign id number 13v528000 (steering) but was informed by the dealer that the part was not available. the contact had not experienced a failure. the manufacturer was not contacted..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS28A78G. Dodge Ram 2500 2008 problem was reported in SPRINGBROOK, VA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering Review #10585300

DODGE RAM 2500 2008 car safety problem was reported on Jan 06, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact received notification of nhtsa campaign id number: 13v528000(steering) and stated that the repairs were not taken care of in a reasonable amount of time. the dealer indicated that the parts were not available. the contact had not experienced a failure. the manufacturer was not contacted. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS28A38G. Dodge Ram 2500 2008 problem was reported in BUCKLEY, MI. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering Review #10585434

DODGE RAM 2500 2008 car safety problem was reported on Jan 06, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact received notification of nhtsa campaign id number: 13v529000 (steering) but was advised by the dealer that the parts needed to complete the repair were not available. the manufacturer was also contacted and could not provide an reasonable date for when the vehicle would receive the recall repairs. the contact had not experienced a failure..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS28A08G. Dodge Ram 2500 2008 problem was reported in BREMERTON, WA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering Review #10587298

DODGE RAM 2500 2008 car safety problem was reported on Jan 01, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact stated that he received notification of nhtsa campaign number: 13v259000 (steering) but was unable to have the vehicle repaired because the part was not available. the contact stated that the manufacturer had surpassed a reasonable time frame to initiate the recall repairs. the manufacturer was made aware of the contact's concerns. the contact did not experience the failure..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS29A48G. Dodge Ram 2500 2008 problem was reported in HAMPSTEAD, NC. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering Review #10587390

DODGE RAM 2500 2008 car safety problem was reported on Mar 12, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact attempted to have the vehicle repaired under nhtsa campaign number:13v529000 (steering) but was made aware that the parts were not available and the repairs were unable to be performed for the recall. the contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repairs. the contact had not experienced a failure. kmj.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS28A48G. Dodge Ram 2500 2008 problem was reported in PORT ORCHARD, WA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering Review #10588598

DODGE RAM 2500 2008 car safety problem was reported on Dec 17, 2013.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl*the contact owns a 2008 dodge ram 2500. the contact attempted to have the vehicle repaired under nhtsa recall campaign number:13v528000 (steering). the contact was advised that the parts were not available and as a result the recall repair could not be performed. the contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. there were no failures at this time. .0 person(s) were injured. 0 person(s) died.Mileage was 80000 miles. Vehicle Identification Number (VIN):3D7KS29C36G. Dodge Ram 2500 2008 problem was reported in COLUMBUS, MT. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering Review #10588787

DODGE RAM 2500 2008 car safety problem was reported on Dec 26, 2013.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact received a recall notification of nhtsa campaign id number: 13v529000 (steering) however, the contact was not able to have the vehicle serviced under the recall due to the part not being available. the dealer was unable to provide an expected date for the remedy part to become available. the manufacturer was notified of the delay. the contact had not experienced a failure. updated 08/11/14*lj.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7LT2EL6BG. Dodge Ram 2500 2008 problem was reported in VEEDERSBURG, IN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Dodge Ram 2500 2008 drive type:4WD. FUEL SYSTEM:Turbo. FUEL TYPE: DIESEL. DEALER'S NAME: YORK CHRYSLER . DEALER'S TELEPHONE NUMBER: 888-451-5531 .

Dodge Ram 2500 2008 Tires

Dodge Ram 2500 2008 Tires Review #10593175

DODGE RAM 2500 2008 car safety problem was reported on May 20, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with TIRES . cracks have formed on the sidewalls of all the tires, and have become more pronounced lately. the tires are original, and the truck has less than 8,000 miles on it. *tr.Mileage was 7800 miles. Vehicle Identification Number (VIN):3D7KR29A98G. Dodge Ram 2500 2008 problem was reported in CEDAR PARK, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10593270

DODGE RAM 2500 2008 car safety problem was reported on May 21, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact stated that he attempted to have his vehicle repaired under nhtsa campaign number: 13v529000 (steering) but was informed that the parts were not available. the contact felt that since the failure was reported in november of 2013, there should have been a remedy available before may of 2014. the contact stated that the manufacturer had exceeded a reasonable time for repair. the contact had not experienced a failure. dr .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS29A08G. Dodge Ram 2500 2008 problem was reported in CARY, NC. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering Review #10593794

DODGE RAM 2500 2008 car safety problem was reported on July 11, 2008.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . i have a recall that still to this day has not been taken care of, and was sent out in nov. 2013. the dealership says that the parts have been back log, and now i have had to pay for a frontend alignment. this truck has had right tie rod and other front end work done ever since i have owned it. i'm so upset over all, and in hopes that ntmv safety can do something about this. as ntmv safety act says that this could cause a loss of directional control and / or crash without warning. and to pay thousands of dollars for a truck that i paid hard earn dollars for, and could endanger someone else or myself. i don't feel it is safe to drive, because of all these recalls i have been sent. yet, i have invested $$$$$$ in this truck and i need it to be safe. what can i do? can you help? please! *tr.0 person(s) were injured. 0 person(s) died.Mileage was 26000 miles. Dodge Ram 2500 2008 problem was reported in PAYSON, AA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 70 mph.

Dodge Ram 2500 2008 Steering Review #10594299

DODGE RAM 2500 2008 car safety problem was reported on Jan 06, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . received a safety recall notice from chrysler in early january 2014 for left tie rod replacement on 2008 dodge 2500 pickup truck. i have attempted to schedule repairs to replace left tie rod ball stud on numerous locations with local chrysler/dodge dealer and have been told they have not been getting parts from manufacturer. first review and attempt to schedule was on january 14th. placed on wait list. have followed up in both late february and late march to schedule, and still told no parts available to repair under recall notice. dealer informed me they will contact when they can schedule. today is may 27th, 2014- no call back to schedule yet. *tr.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS28D88G. Dodge Ram 2500 2008 problem was reported in LYNNWOOD, WA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. FUEL TYPE: GAS.

Dodge Ram 2500 2008 Steering Review #10596766

DODGE RAM 2500 2008 car safety problem was reported on Jan 01, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . i received recall notice n49/nhtsa13v-529 and took my vehicle to a local dodge dealership in january 2014. i was placed on a waiting list for parts to be ordered. i called the dealership in march 2014 and was told the parts were on back order. it is now june and i am being told the part is still on back order. i do not feel comfortable operating my vehicle on the freeway knowing there is a discrepancy with my steering. i also do not think a 6 month wait to repair a safety recall is timely or acceptable. i would appreciate your assistance in resolving this matter. *tr.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS19D18G. Dodge Ram 2500 2008 problem was reported in GLENDALE, AZ. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 8 CYLINDERS. FUEL TYPE: GAS.

Dodge Ram 2500 2008 Steering Review #10596152

DODGE RAM 2500 2008 car safety problem was reported on Nov 10, 2010.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . submission from constituents re 2008 dodge ram 2500 pick up truck recall notice. (full document not imaged). *smd the consumer stated, he experienced problems with the truck for several years. whenever he went out of town, the vehicle would severely vibrate. the problems included, the tie rods and front end issues. finally, the problem was identified in a recall letter, he received. also, the egr had to be replaced at a cost of $ 950..Vehicle Identification Number (VIN):3D7KS28A88G. Dodge Ram 2500 2008 problem was reported in DINOSAUR, CO. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Dodge Ram 2500 2008 drive type:4WD. FUEL SYSTEM:Turbo. FUEL TYPE: DIESEL. DEALER'S NAME: DOWNTOWN DODGE . DEALER'S TELEPHONE NUMBER: 435-789-0654 . DEALER'S CITY: VERNAL . DEALER'S STATE CODE: UT. DEALER'S ZIPCODE: 84078 .

Dodge Ram 2500 2008 Engine And Engine Cooling Engine Diesel

Dodge Ram 2500 2008 Engine And Engine Cooling Engine Diesel Review #10596152

DODGE RAM 2500 2008 car safety problem was reported on Nov 10, 2010.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with ENGINE AND ENGINE COOLING:ENGINE:DIESEL . submission from constituents re 2008 dodge ram 2500 pick up truck recall notice. (full document not imaged). *smd the consumer stated, he experienced problems with the truck for several years. whenever he went out of town, the vehicle would severely vibrate. the problems included, the tie rods and front end issues. finally, the problem was identified in a recall letter, he received. also, the egr had to be replaced at a cost of $ 950..Vehicle Identification Number (VIN):3D7KS28A88G. Dodge Ram 2500 2008 problem was reported in DINOSAUR, CO. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Dodge Ram 2500 2008 drive type:4WD. FUEL SYSTEM:Turbo. FUEL TYPE: DIESEL. DEALER'S NAME: DOWNTOWN DODGE . DEALER'S TELEPHONE NUMBER: 435-789-0654 . DEALER'S CITY: VERNAL . DEALER'S STATE CODE: UT. DEALER'S ZIPCODE: 84078 .

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10597584

DODGE RAM 2500 2008 car safety problem was reported on Jan 06, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact received a recall notice for nhtsa campaign number: 13v528000 (steering). the dealer stated that the parts for the repair were unavailable. the contact stated that the repair was not performed in a reasonable amount of time. the manufacturer was not notified. the contact had not experienced a failure. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS28A48G. Dodge Ram 2500 2008 problem was reported in CHINO VALLEY, AZ. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering Review #10597674

DODGE RAM 2500 2008 car safety problem was reported on Feb 03, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . i received a recall notice back in january 2014 and it stated to contact the dealer to have the recall maintenance done. i have called and tried for 5 months to get an appointment to have my ram looked at, to no avail. i keep being told that they are waiting for parts. if chrysler initiated this recall why don't they have the parts to fix it. my neighbor has a ram also and he is in the same position. what can i do to get my ram repaired? the recall # is n49/nhtsa 13v-529. *tr.0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS29A78G. Dodge Ram 2500 2008 problem was reported in TUCSON, AZ. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. FUEL TYPE: DIESEL.

Dodge Ram 2500 2008 Steering Review #10605624

DODGE RAM 2500 2008 car safety problem was reported on Jan 07, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact received a recall notification under nhtsa campaign id number 13v528000 (steering). however, the part to do the repairs was not available. the manufacturer was made aware of the problem. the contact had not experienced a failure. .0 person(s) were injured. 0 person(s) died.Mileage was 89000 miles. Vehicle Identification Number (VIN):3D7KS26D18G. Dodge Ram 2500 2008 problem was reported in DEPAUW, IN. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Suspension Front Control Arm Lower Ball Joint

Dodge Ram 2500 2008 Suspension Front Control Arm Lower Ball Joint Review #10605920

DODGE RAM 2500 2008 car safety problem was reported on Apr 16, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT . tl* the contact owns a 2008 dodge ram 2500. the contact stated that while traveling 25 mph, a loud noise was emitted from the front end of the vehicle and no warning lights illuminated on the instrument panel. the contact mentioned that the vehicle would veer to the right and to the left. the failure recurred several times. the manufacturer was not contacted. the vehicle was taken to an independent mechanic. the technician diagnosed that the upper and lower ball joints on both the driver and passenger side needed to be replaced. the failure mileage was 55,000 and the current mileage was 57,222. .0 person(s) were injured. 0 person(s) died.Mileage was 55000 miles. Vehicle Identification Number (VIN):3D7KS28AX8G. Dodge Ram 2500 2008 problem was reported in POINEER, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 25 mph.

Dodge Ram 2500 2008 Suspension Review #10605920

DODGE RAM 2500 2008 car safety problem was reported on Apr 16, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with SUSPENSION . tl* the contact owns a 2008 dodge ram 2500. the contact stated that while traveling 25 mph, a loud noise was emitted from the front end of the vehicle and no warning lights illuminated on the instrument panel. the contact mentioned that the vehicle would veer to the right and to the left. the failure recurred several times. the manufacturer was not contacted. the vehicle was taken to an independent mechanic. the technician diagnosed that the upper and lower ball joints on both the driver and passenger side needed to be replaced. the failure mileage was 55,000 and the current mileage was 57,222. .0 person(s) were injured. 0 person(s) died.Mileage was 55000 miles. Vehicle Identification Number (VIN):3D7KS28AX8G. Dodge Ram 2500 2008 problem was reported in POINEER, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 25 mph.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10606322

DODGE RAM 2500 2008 car safety problem was reported on June 25, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact stated received the first notification for recall nhtsa campaign number: 13v529000 (steering). the dealer stated that they have only serviced 200 this year and have a waiting list of 400 people. the manufacturer was not made aware of the delay. the vehicle was not repaired. the contact had not experienced the failure described in the recall. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS28A18G. Dodge Ram 2500 2008 problem was reported in RICHLAND, WA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering Review #10606918

DODGE RAM 2500 2008 car safety problem was reported on Dec 11, 2013.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact received a recall notification for nhtsa campaign number: 13v528000 (steering); however, the part was unavailable to repair the vehicle. the manufacturer was notified. the contact had not experienced a failure. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS28D08G. Dodge Ram 2500 2008 problem was reported in PLESANTVILLE, IA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering Review #10607121

DODGE RAM 2500 2008 car safety problem was reported on June 30, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact attempted to have the vehicle repaired under nhtsa campaign number: 13v529000 (steering); however, the dealer stated that the parts were not available. the contact had not experienced a failure..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS28A38G. Dodge Ram 2500 2008 problem was reported in LINCOLNTON, GA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering Review #10607675

DODGE RAM 2500 2008 car safety problem was reported on Apr 30, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact received a recall notification of nhtsa campaign id number: 13v529000 (steering) however, the contact was not able to have the vehicle serviced under the recall because the part needed was unavailable to perform the repair. the dealer was unable to provide an expected date for the remedy part to become available. the manufacturer was not notified of the issue. the contact had not experienced a failure..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS28D88G. Dodge Ram 2500 2008 problem was reported in ROCHESTER, NY. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering Review #10608699

DODGE RAM 2500 2008 car safety problem was reported on July 07, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact stated that the vehicle was included in nhtsa campaign number: 13v529000 (steering). the contact stated that he had contacted the dealer and the manufacturer numerous times and there was no estimated date when the parts would be available for the recall repairs. the contact felt that the repair was not taken care of in a reasonable amount of time. the contact had not experienced a failure. the manufacturer was not notified of the issue..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS28A38G. Dodge Ram 2500 2008 problem was reported in GLADSTONE, MO. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering Review #10609770

DODGE RAM 2500 2008 car safety problem was reported on Apr 01, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact received a notification of nhtsa campaign number: 13v528000 (steering) and stated that the part to do the repairs was unavailable. the manufacturer was made aware of the issue. the contact had not experienced a failure. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS28A88G. Dodge Ram 2500 2008 problem was reported in EL CAMPO, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2008 Steering Review #10609816

DODGE RAM 2500 2008 car safety problem was reported on July 01, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact received notification of nhtsa campaign number: 13v529000 (steering) and stated that the part to do the repairs was unavailable. the manufacturer was made aware of the issue. the contact did not experienced a failure. the vin was not available. .0 person(s) were injured. 0 person(s) died.Dodge Ram 2500 2008 problem was reported in MOUNT AUKUM, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 0 mph.

Dodge Ram 2500 2008 Steering Review #10609889

DODGE RAM 2500 2008 car safety problem was reported on Jan 20, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . there has not yet been an incident but we have been trying to comply with this safety recall since january 20, 2014 and our dealer does not yet have the part from chrysler to repair our truck. why?? i believe the dealer to be honest in their attempt to obtain the parts and do not understand why there is not a designated operation to produce and provide these needed safety corrections. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS28A88G. Dodge Ram 2500 2008 problem was reported in BEND, OR. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Suspension

Dodge Ram 2500 2008 Suspension Review #10614838

DODGE RAM 2500 2008 car safety problem was reported on Mar 01, 2013.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with SUSPENSION . while driving this truck at approximately 60 miles an hour i hit a expansion joint as i was on a slight left turn cause the vehicle to shake violently almost losing control until i slowed down to below 30 miles an hour then the suspension stabilized. this has occurred on many occasions since the first incident and i have learned to anticipate when this may occur and expect it. i have taken vehicle to have suspension check and they have found no problems. it was recommended that i put a dual shock absorbing steering stabilizer on this vehicle. this was done and did not correct the problems..0 person(s) were injured. 0 person(s) died.Mileage was 54694 miles. Vehicle Identification Number (VIN):3D7KS28A08G. Dodge Ram 2500 2008 problem was reported in FORKS, WA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 60 mph.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10614838

DODGE RAM 2500 2008 car safety problem was reported on Mar 01, 2013.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . while driving this truck at approximately 60 miles an hour i hit a expansion joint as i was on a slight left turn cause the vehicle to shake violently almost losing control until i slowed down to below 30 miles an hour then the suspension stabilized. this has occurred on many occasions since the first incident and i have learned to anticipate when this may occur and expect it. i have taken vehicle to have suspension check and they have found no problems. it was recommended that i put a dual shock absorbing steering stabilizer on this vehicle. this was done and did not correct the problems..0 person(s) were injured. 0 person(s) died.Mileage was 54694 miles. Vehicle Identification Number (VIN):3D7KS28A08G. Dodge Ram 2500 2008 problem was reported in FORKS, WA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 60 mph.

Dodge Ram 2500 2008 Seat Belts

Dodge Ram 2500 2008 Seat Belts Review #10615865

DODGE RAM 2500 2008 car safety problem was reported on July 09, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with SEAT BELTS . the seat beat buckle will hang up and you can not unbuckle the safety restraint. .0 person(s) were injured. 0 person(s) died.Dodge Ram 2500 2008 problem was reported in TOWANDA, KS. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10616394

DODGE RAM 2500 2008 car safety problem was reported on July 25, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . received notice approximately 6 months ago, same story as the other complaints i've seen for this same issue. dealer states that they don't have parts... not enjoying driving my family around thinking about the possibility of having an accident for the entire duration that we've known about this. hard to fathom why they even bothered to send out notice with no ability to follow through and remedy the defect. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS28A98G. Dodge Ram 2500 2008 problem was reported in CHICO, CA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Power Train

Dodge Ram 2500 2008 Power Train Review #10619393

DODGE RAM 2500 2008 car safety problem was reported on Aug 01, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with POWER TRAIN . i was driving past my house, i put the drive train in 4 wheel drive and when i stepped on the gas pedal the throttle went wide open. i tried to steer clear of all obstructions but when i hit my driveway the truck went sideways and it rolled down a culvert and ended upside down. the truck has been declared a "total loss". i sustained minor cuts and bruises but came out ok. i downloaded the obd2 data from the computer after the accident and it showed code p0731 g pend gear 1 incorrect ratio???. i have not been able to find any history of this problem in the 2008 ram data..Vehicle was involved in a crash. 1 person(s) were injured. 0 person(s) died.Mileage was 22150 miles. Vehicle Identification Number (VIN):3D7KS29A78G. Dodge Ram 2500 2008 problem was reported in TUCSON, AZ. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 10 mph.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10621963

DODGE RAM 2500 2008 car safety problem was reported on Apr 16, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact received a recall notification for nhtsa campaign number: 13v528000 (steering); however, the part needed for the repair was unavailable. the contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. the manufacturer was made aware of the delay. the contact had not experienced a failure. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS29DX7G. Dodge Ram 2500 2008 problem was reported in ITHACA, NY. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering Linkages Tie Rod Assembly

Dodge Ram 2500 2008 Steering Linkages Tie Rod Assembly Review #10625931

DODGE RAM 2500 2008 car safety problem was reported on Aug 06, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING:LINKAGES:TIE ROD ASSEMBLY . tl* the contact owns a 2008 dodge ram 2500. while driving approximately 55 mph, the steering failed. the contact discovered that the passenger side tie rod detached from the vehicle. the contact performed a temporary repair on the vehicle. the dealer stated that the vehicle was not required to be repaired according to nhtsa campaign number: 13v528000 (steering). an independent mechanic repaired the vehicle. the manufacturer was notified. the approximate failure mileage was 40,000..0 person(s) were injured. 0 person(s) died.Mileage was 40000 miles. Vehicle Identification Number (VIN):3D7KS26D28G. Dodge Ram 2500 2008 problem was reported in MONCLOVA, OH. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 55 mph.

Dodge Ram 2500 2008 Steering Linkages Tie Rod Assembly Review #10626960

DODGE RAM 2500 2008 car safety problem was reported on Aug 21, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING:LINKAGES:TIE ROD ASSEMBLY . tl* the contact owns a 2008 dodge ram 2500. the contact received a recall notification for nhtsa campaign number: 13v529000 (steering); however, the part needed for the repair was unavailable. the dealer stated that the driver side tie rod needed to be replaced. the mechanic was uncertain when the part would be available. the manufacturer was notified. the contact had not experienced a failure..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS28A58G. Dodge Ram 2500 2008 problem was reported in KENNESAW, GA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Suspension

Dodge Ram 2500 2008 Suspension Review #10627233

DODGE RAM 2500 2008 car safety problem was reported on Mar 05, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with SUSPENSION . at higher speeds the front end starts to shake violently (death wobble) to the point of loosing control, you have to come to a complete stop to get it to stop which can be a problem when driving on the freeway i've took it to the dealer and they said it was the ball joints so i had them replaced it didnt help i also replaced the shocks and steering dampner all this at my own expense. i've had the truck in twice for recalls on the tie rod ends also. from the reasearch i have done online it seems that alot of owners are having the same trouble with no help from dodge to correct the problem.0 person(s) were injured. 0 person(s) died.Mileage was 37000 miles. Vehicle Identification Number (VIN):3D7KS29D38G. Dodge Ram 2500 2008 problem was reported in GARLAND, UT. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 65 mph.

Dodge Ram 2500 2008 Steering Linkages Tie Rod Assembly

Dodge Ram 2500 2008 Steering Linkages Tie Rod Assembly Review #10627477

DODGE RAM 2500 2008 car safety problem was reported on Aug 22, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING:LINKAGES:TIE ROD ASSEMBLY . tl* the contact owns a 2008 dodge ram 2500. while driving approximately 45 mph, the steering wheel seized and excessive force was required to control the steering. the steering wheel became difficult to maneuver. the vehicle was towed to the dealer and the technician stated that the driver side tie rod ball stud on the service parts steering linkage was fractured. the technician informed the contact that the vehicle was included in nhtsa campaign number: 13v528000 (steering); however, the dealer refused to perform the recall repair since the defective part was bolted in rather than clamped in on the vehicle. the manufacturer was not notified of the failure. the approximate failure mileage was 150,000. .0 person(s) were injured. 0 person(s) died.Mileage was 150000 miles. Vehicle Identification Number (VIN):3D7KS28A88G. Dodge Ram 2500 2008 problem was reported in NEW FAIRFIELD, CT. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 45 mph.

Dodge Ram 2500 2008 Steering Review #10627660

DODGE RAM 2500 2008 car safety problem was reported on Aug 23, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . i have received an recall notice in january 2014. i was told to wait until april to set up an appointment for serviceing my vehicle. it is now the end of august. i have made repeated phone calls and i was told that i am on the list. call back in a month. i have and now it is just a nuisance. i have called other dealerships and they have told me that customers have called in december and their vehicles are still on the list to get repaired. why would a manufacture have a recall when they can not honor it. the letter stated, "important safety recall n49/nhtsa 13v-529", is a joke. this notice should not be sent out unless they can honor it!.0 person(s) were injured. 0 person(s) died.Dodge Ram 2500 2008 problem was reported in LLEWELLYN, PA. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering Linkages Tie Rod Assembly Review #10628951

DODGE RAM 2500 2008 car safety problem was reported on Aug 22, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING:LINKAGES:TIE ROD ASSEMBLY . tl* the contact owns a 2008 dodge ram 2500. the contact stated that while reversing, the front passenger side tie rod assembly suddenly fractured causing the vehicle to crash into a tree. the vehicle was taken to the dealer, who diagnosed that the tie rod assembly needed to be replaced. the vehicle was not repaired. the manufacturer was notified of the failure. the failure mileage was 134,000. .Vehicle was involved in a crash. 0 person(s) were injured. 0 person(s) died.Mileage was 134000 miles. Vehicle Identification Number (VIN):3D7KS29A28G. Dodge Ram 2500 2008 problem was reported in JEFFERSON, CO. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering Review #10628739

DODGE RAM 2500 2008 car safety problem was reported on Mar 14, 2013.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . 2008 dodge ram 3500. consumer writes in regards to left tie rod recall notice. *smd the consumer stated the tie rod broke causing his truck to cross traffic, which resulted in him landing in a ditch. chrysler sent the consumer a letter stating the repair order he submitted, did not show replacement of parts or services involved in the recall. according to the invoice, the right outer tie rod end broke and damaged the right sway bar end link. *jb.Vehicle Identification Number (VIN):3D2WH46A48G. Dodge Ram 2500 2008 problem was reported in STROUD, OK. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. Vehicle had 6 CYLINDERS. Dodge Ram 2500 2008 drive type:4WD. FUEL SYSTEM:Turbo. FUEL TYPE: DIESEL. DEALER'S NAME: LANDERS DODGE . DEALER'S CITY: SOUTHHAVEN . DEALER'S STATE CODE: MS.

Dodge Ram 2500 2008 Steering Review #10633356

DODGE RAM 2500 2008 car safety problem was reported on Nov 15, 2013.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact received a recall notification for nhtsa campaign number: 13v529000 (steering); however, the part needed to repair the vehicle was unavailable. the manufacturer was notified. the contact had not experienced a failure..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS28A88G. Dodge Ram 2500 2008 problem was reported in HOWE, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering Review #10643678

DODGE RAM 2500 2008 car safety problem was reported on Oct 01, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . while travelling on an interstate highway the vehicle hit a bump and began to shake violently. i slowed the vehicle and the shaking subsided however steering control was minimally maintained. subsequent bumps or increase in speed resulted in the shaking. the vehicle was stopped and inspected. at that time it was observed the right tie rod end had become completely detached from the steering knuckle. the vehicle was towed to a dodge dealer. the dealer indicated this vehicle was not part of the recall and replaced the right tie rod assembly at my expense. further inspection showed the left tie rod end also showed excessive wear and was also subsequently replaced. .0 person(s) were injured. 0 person(s) died.Mileage was 66400 miles. Vehicle Identification Number (VIN):3D7KS28A38G. Dodge Ram 2500 2008 problem was reported in GOLDEN, CO. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 60 mph.

Dodge Ram 2500 2008 Steering Review #10648170

DODGE RAM 2500 2008 car safety problem was reported on Jan 16, 2014.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact received notification of nhtsa of nhtsa campaign number: 13v528000 (steering) however, the part to do the repair was unavailable. the contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. the manufacturer was not notified of the issue. the contact had not experienced. ..updated 12/15/14*bf .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS28A97G. Dodge Ram 2500 2008 problem was reported in SOUTH COSSEYVILLE, OK. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Suspension

Dodge Ram 2500 2008 Suspension Review #10650425

DODGE RAM 2500 2008 car safety problem was reported on Dec 02, 2013.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with SUSPENSION . about 11 months ago i received a recall notice from chrysler for my 2008 dodge ram 2500 pick up truck, it was for a suspension problem with the tie rods, recall #n49/nhtsa 13v-529 i called my local dodge dealer where i bought the truck and they said they could not get the parts, i called several months later and they told me the replacement parts had been "recalled". i have contacted them numerous times still no parts. i have called chrysler several times and get the same run around, no parts available. this is a real safety issue as the failure of the parts could cause me to crash. i would think chrysler would be nervous as the liability issue could be very expensive. what if they fail and someone is killed, is this my fault would i be liable? this has been going on for almost a year and still not resolved..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS28A98G. Dodge Ram 2500 2008 problem was reported in HEREFORD, AZ. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering

Dodge Ram 2500 2008 Steering Review #10650425

DODGE RAM 2500 2008 car safety problem was reported on Dec 02, 2013.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . about 11 months ago i received a recall notice from chrysler for my 2008 dodge ram 2500 pick up truck, it was for a suspension problem with the tie rods, recall #n49/nhtsa 13v-529 i called my local dodge dealer where i bought the truck and they said they could not get the parts, i called several months later and they told me the replacement parts had been "recalled". i have contacted them numerous times still no parts. i have called chrysler several times and get the same run around, no parts available. this is a real safety issue as the failure of the parts could cause me to crash. i would think chrysler would be nervous as the liability issue could be very expensive. what if they fail and someone is killed, is this my fault would i be liable? this has been going on for almost a year and still not resolved..0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS28A98G. Dodge Ram 2500 2008 problem was reported in HEREFORD, AZ. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering Review #10659721

DODGE RAM 2500 2008 car safety problem was reported on Sept 09, 2013.DODGE RAM 2500 2008, manufactured by Chrysler Group LLC had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. the contact received a notification for recall nhtsa campaign number: 13v529000 (steering). however, the part needed was unavailable. the contact stated the manufacturer exceeded a reasonable amount of time for the recall repair. the manufacturer was not notified of the issue. the contact had not experienced a failure. .0 person(s) were injured. 0 person(s) died.Vehicle Identification Number (VIN):3D7KS28A98G. Dodge Ram 2500 2008 problem was reported in ROCKSPRINGS, TX. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Steering Review #10671808

DODGE RAM 2500 2008 car safety problem was reported on Jan 05, 2015.DODGE RAM 2500 2008, manufactured by Chrysler (FCA US LLC) had a problem with STEERING . tl* the contact owns a 2008 dodge ram 2500. while the vehicle was undergoing a routine inspection at the dealer, the technician diagnosed that the front tie rod and steering shocks needed to be replaced. the vehicle was repaired. the contact received notification of nhtsa campaign number: 13v528000 (steering). the manufacturer was not notified of the failure. the failure mileage was 66,721. .0 person(s) were injured. 0 person(s) died.Mileage was 66721 miles. Vehicle Identification Number (VIN):3D7KS28A18G. Dodge Ram 2500 2008 problem was reported in BENTON, AR. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control.

Dodge Ram 2500 2008 Power Train

Dodge Ram 2500 2008 Power Train Review #10671981

DODGE RAM 2500 2008 car safety problem was reported on Jan 11, 2015.DODGE RAM 2500 2008, manufactured by Chrysler (FCA US LLC) had a problem with POWER TRAIN . tl* the contact owns a 2008 dodge ram 2500. the contact stated that while traveling approximately 75 mph, a loud abnormal sound emitted from the vehicle as it decelerated. the contact had to merge over to the side of the road. after inspecting the vehicle, the contact noticed that the uv joint locked and the transfer case fractured without warning. the vehicle was towed to an independent mechanic for further inspection. the vehicle was not repaired. the vin was also included in nhtsa campaign number: 13v528000 (steering). the dealer was unable to confirm when the part would become available to repair the vehicle. the manufacturer was notified of the failure. the approximate failure mileage was 177,000..0 person(s) were injured. 0 person(s) died.Mileage was 177000 miles. Vehicle Identification Number (VIN):3D7KS28A18G. Dodge Ram 2500 2008 problem was reported in JACKSONVILLE, FL. Vehicle was not using ANTI-LOCK BRAKES. Vehicle was not using Cruise Control. VEHICLE SPEED: 75 mph.


Dodge Ram 2500 2008 Systems


Air Bags 1 Review(s)

Air Bags Frontal 1 Review(s)

Electrical System 4 Review(s)

Electronic Stability Control 1 Review(s)

Engine 4 Review(s)

Engine And Engine Cooling 6 Review(s)

Engine And Engine Cooling Engine 3 Review(s)

Engine And Engine Cooling Engine Diesel 6 Review(s)

Engine And Engine Cooling Exhaust System 8 Review(s)

Equipment 1 Review(s)

Exterior Lighting 3 Review(s)

Fuel System, Diesel 4 Review(s)

Parking Brake 1 Review(s)

Power Train 8 Review(s)

Power Train Automatic Transmission 1 Review(s)

Power Train Driveline 1 Review(s)

Power Train Driveline Universal Joint 1 Review(s)

Power Train Manual Transmission 1 Review(s)

Seat Belts 2 Review(s)

Seats 1 Review(s)

Service Brakes, Hydraulic 1 Review(s)

Steering 120 Review(s)

Steering Gear Box (other Than Rack And Pinion) 1 Review(s)

Steering Linkages Tie Rod Assembly 15 Review(s)

Structure 1 Review(s)

Structure Frame And Members 1 Review(s)

Suspension 27 Review(s)

Suspension Front 10 Review(s)

Suspension Front Control Arm Lower Ball Joint 1 Review(s)

Suspension Front Wheel Bearing 1 Review(s)

Tires 1 Review(s)

Unknown Or Other 1 Review(s)

Vehicle Speed Control 6 Review(s)

Visibility 3 Review(s)

Visibility/wiper 3 Review(s)

Visibility Defroster/defogger System 2 Review(s)

Wheels 2 Review(s)



Search 1000s of Car Reviews, Recalls and Technical Bulletins
Start by entering a car model, system, manufacturer or any combination of keywords.


Dodge Ram 2500 2008 Reports


I have a 2008 Dodge Nitro thats rear driver side light does not work. I have taken it to a mechanic that can't find out why it won't work and have spent 200.00 He thinks it might be in the wiring system . I have also seen other Dodge Nitro same ye

Every time it rains heavily the passenger floor gets soaking wet. My car has never been in an accident or any body damage. It is a 2007 Nitro 4X4. Wasn't there a recall years ago for fixing the roof rack assembly? Has anyone else ever had this iss

stereo is all static but the cd player works fine...antennae perhaps?

I have the same problem. Dodge can't find the problem so they told me to take it. Next week I'm turning it in and go through the lemom law. Very frustrating when you buy the warrrant and they can't fix it. Garrrrrrrrr.

Ihave a 95 Dodge Avenger and the 30 Amp starter/ignition fuse keeps blowing. As soon as you turn the key the instrument panel lights are dim and then the fuse blows. I have replaced the starter, cables, ignition switch, fusible link and battery an

2004 Dodge 2500 Ram Truck, Laramie trim package...horn goes off with no one around it - truck is off and parked in the driveway, keys were not touched.

power windows won't work pushing window buttons causes the water in fuel lite to come on along with the brake indicator lite and wait to start lite also turning on the a/c heater causes the same thing soon as you release the switches lites go out

2001 Dodge 5.9 cummins going down the road it sputtered 3 times & shut off and will not restart

I purchased a new Dodge Grand Caravan from Bankston Dodge of Grand Prairie, Texas in May of 2008. Less than 8 months after that (around 12,000 miles) my front brakes went completely out with no indication whatsoever of any problems (The device tha

1995 DODGE NEON 1.6l Feels like it is slipping while driving. with brake pedal depressed car surges,
what could be causeing thjis problem.

Probably not the door seals. You may have to unstop the two drains that can get filled with debris. The two drains are located in the trough under the grill work that is under the wiper blades. You will need to remove the wiper arms, then remove a

'06 dakota - unable to put fuel in gas tank

Discuss Dodge Ram 2500


No comments have been provided.